497 Gaskets And Seals tenders are published by various Tendering Authorities & Private companies. 497 live Tender for Gaskets And Seals are available in Gaskets And Seals Tender section You can further filter Gaskets And Seals tenders by Tender Value, Tender Submission Date or Project Location.
Corrigendum - Supply Of Fkm Based O-Rings ( Joint Packing ) For S / C Valves Of Lpg Cylinders At Lpg Bottling Plants Under Maharastra State Office
Corrigendum - Procurement Of Lu Oil Pump And Mechanical Seal
Tender For Purchase The Spare Parts For Vehicle No. Gj6g-6476, Gj6g-6677. - Vacuum Brake Booster Assy, Front Wheel Oil Seal, Front Wheel Cylinder Assy, Front Brake Adjuster, Brake Adjuster Bolt, Rear Wheel Oil Seal, Rear Axle Packing, Rear Wheel Cylinder Assy, Rear Brake Adjuster, Brake Adj Bolt, Lock Washer, Brake Shoe Spring, Wheel Cylinder Bolt, Master Cylinder Assy, Slave Cylinder Assy, Clutch Bush.
Quotations For Supply Of Cat A Stores For Apollo Sensor Paver Ap550 Dx:-1.01 ( 1478986 ) Axle Shaft 789.7Mm 1.02 ( 1476176 ) Gasket Oil 75 X 100 X 10 1.03 ( 1451722 ) Gasket Oil 95 X 125 X 13 1.04 ( 1476029 ) Tapered Roller Bearing 32213 1.05 ( 1476023 ) Tapered Roller Bearing 30216 1.06 ( H40180ab ) Screed Cylinder
Supply Of Items - 1. Gasket Style-20 Water 1Mm Thk- Asbestos Gasket Style 20 Water - 1Mm Thk Of Size 1525Mm X 1650Mmx 1Mm Thick Conforming To Is 2712-1998 Gr.W/3, Graphite Coated, Max.Temp:380 Deg C. Pr:35 Ksc, Compressibility : 7.5-12 %, Tensile Strength : 9.5 N/Mm2 Make: Spitmaan / Champion. 2. Gasket Style 20 Water 1.6 Mm - Asbestos Gasket Style 20 Water - 1.6Mm Thk Of Size 1525Mm X 1650Mmx 1.6 Mm Thick Conforming To Is 2712-1998 Gr.W/3, Graphite Coated, Max.Temp:380 Deg C. Pr:35 Ksc, Compressibility : 7.5-12 %, Tensile Strength : 9.5 N/Mm2 Make: Spitmaan / Champion. 3. Gasket Style 20 Water 3Mm Thk - Asbestos Gasket Style 20 Water - 3 Mm Thk Of Size 1525Mm X 1650Mmx 3Mm Thick Conforming To Is 2712-1998 Gr.W/3, Graphite Coated, Max.Temp:380 Deg C. Pr:35 Ksc, Compressibility : 7.5-12 %, Tensile Strength : 9.5 N/Mm2 Make: Spitmaan / Champion. 4. Non Grapited Styl 39 Gaskt-3Mm - Asbestos Non Graphited Gasket Of Style 39 - 3 Mm Thk Of Size 1525Mm X 1650Mmx 3Mm Thick Conforming To Is 2712-1998 Gr.O/2Is 2712-1979 Gr. W/2, Orange Colored, Max.Temp:440 Deg C. Pr:80 Ksc, Compressibility: 7- 12%, Ten Strength: 18N/Mm2 Make: Spitmaan / Champion. 5. Gland Packing-14Mm - Gland Packing Size-14Mm ,Style-23, High Tensile Strenght Ptfe Yarn With High Quality Graphite Particles. 6. Neoprene Rubber Gasket Sheet - 100% Pure Neoprene Rubber Sheet Size: 1 Mtr X 2.0 Mtr X 5Mm.
Tender For Supply Of Arrester Barrier Spares:-1 1360535 104Su Us05-5 Rotary Lip Type Seal, 150180 ( Type-4 ) 2 1351343 304C 03060 ( A ) Duct Support ( Arm End ) 3 896888 304C 5008 Gasket 4 1351576 304C 07009 ( B ) Locking Washer 5 1351582 304C 10080 ( B ) Std Grade 8 Din 982 Nyloc Nut M 24 With Washer 6 1351580 304C 10080 ( B ) Std Grade 8 Din 985 Nyloc Nut M 33 With Washer 7 906367 304C 1141 Spacer ( Large ) 8 906358 304C 1142 Spacer Small 9 906404 304C Aas-01-123 Rubber Pad 10 906369 304C Aas-01-139 ( A ) Side Plate Large 11 906370 304C Aas-01-140 ( A ) Side Plate Small 12 1302113 304C Aas-01-520 ( B ) Limit Switch ( Roller Type ) 13 903145 304C Aas-02-019 ( A ) Roller Assembly 14 903172 304C Is-549 Split Pin 5 X 40 Mm 15 1351429 304C So4-5 Belt Width 63Mm 34 Oz, 4 Layer, 7 M Long 16 903269 304C Std-Is-6761 M 12 X 25
Supply Of Turbine Seal
Supply Of Various Size Gland Packing For Boiler And Consumable Item For Coal Mill At Wtps.
Procurement Of Mhl Mcm Mandatory Items:-Cover, Rest , Gasket
Supply Of Spiral Wound Metallic Gasket & Gasket Sheet For Ash Pl & Tmd-Ii At Wtps.
Tender For Work Of Attending Of Oil Leakage, Replacement Of All Gasket, Filtration Of Oil And Cleaning Of 400Kva, 6.6Kv/433 Volts Power Transformer Of M/S.Mamc Make Stacker Cum Reclaimer Machine In Chp,Wtps.
Supply Of Mechanical Seals For High Pressure Boiler Circulation Pump, Low Pressure Boiler Circulating Pump, Hp Feed Pump, Lp Feed Pump And Pre Heat Circulating Pump At Gtps Uran
Supply Of Gland Packings For Unit 1-4
Supply of item -metallic gasket sheet , bolt with nut and washer , tape set , tape set , drill bit -8.5 mm , tool box , fix spanner set , ring spanner set
Supply Of Ppicp Seals For Locations At Cut Lakholi And Ratlam Terminal Under Mpso, Mpso / Ops / Nms / 2018-19 / Pt
Supply Of Plugs And Gaskets
Supply And Delivery Of Spare Parts For Vehicles- 01 Tapped Roller Assembly 02 Accelerator Bush 03 Cross Disc 04 Supply Pump Screw 05 Tap Per Roller Bearing 06 Chassis Bolt 07 Clutch With Drawl Plate Washer 08 Clutch With Drawl Plate Bolt 09 Bolt For Engine Mounting 10 Elbow For Brake Pipe 11 Steering Box Bearing 12 Gasket Cement 13 Gasket Maker 14 Indicator Bulb 24 Volt 15 Battery Terminal Bolt 16 L,I,T Socket For 6Mm Pipe 17 Commutator Fixing Screw 18 Bolt With Nut For Rear Spring & Hanger Bracket 19 Electric Horn 24 Volt 20 Cotter Bolt L/1613 21 Bolt With Nut For D Shackle 22 Steering Box Shim 23 Steering Box Stud (Small) 24 Steering Box Stud (Big) 25 Steering Box Ball 26 Pressure Gauge 27 Cable For Pressure Gauge 28 L T Wire 5Mm 29 L T Wire 6Mm 30 Black Tape Pvc (Big) 31 Pvc Tape (Small) 32 Threaded Seal 33 Radiator Bottom Hose L/1613 34 Ana Bond Red 85 Gm 35 Fan Belt (Pay Loader) 36 Water Pump Hose Connection 37 Water Pump Hose Connection Clamp 38 Cam Plate 39 Head & Rotor 40 T. D. Piston 41 Switch 24 Volt 42 Pre Stroke Shim 43 Nozzle Washer 44 Shim (Nozzle Pressure) 45 Scroll 46 Diaphragm 47 Accelerator Rubber Bush 48 Adjusting Shim 49 Cover Plate 50 Adjustable Spanner 51 Hydraulic Jack 10Ton 52 13/13 Combine Wrench 53 14/14 Combine Wrench 54 15/15 Combine Wrench 55 16/16 Combine Wrench 56 13No Socket 57 Wheel Wrench 33No 58 Wheel Wrench 27/30
Supply Of Hollow Type Round Rubber Gaskets For Sealing Of Top Lid Of 210 Litres Capacity Open Top M.S.Drums
Supply Of Hollow Type Round Rubber Gaskets For Sealing Of Top Lid Of 210 Litres Capacity Open Top M.S.Drums
Tender For Undertaking 6000 Hrly Routines On All Three Gear Boxes :-1 Service 1 1.01 Pre Refit Trials 1.02 6000 Hrly Routines On Gear Boxes 1.03 Hats & Sats One Day Each 2 Spares 2 2.01 O-Ring 2.02 O-Ring 2.03 Gasket 2.04 Sealing Ring 2.05 Sealing Washer 2.06 O-Ring 2.07 O-Ring 2.08 O-Ring 2.09 Gasket 2.1 Gasket 2.11 Gasket 2.12 Snap Ring 2.13 Sealing Ring 2.14 Sealing Washer 2.15 Sealing Washer 2.16 Retaining Ring 2.17 Retaining Ring 2.18 Sealing Ring 2.19 O-Ring 2.2 Needle Cage 2.21 Sealing Ring 2.22 Sealing Ring 2.23 Sealing Ring 2.24 O-Ring 2.25 Washer
Quotation For Supply Order:-1.00 "M&L For Applying Oil Bound Bitumen Primer @ 0.20Kg / Sq M And Providing 04Mm Thick App Modified Water Proofing Memberane Weghing Not Less Than 4.00 Kg / Sq M Reinforced With Non Woven Polyster Matt Weighing Not Less Than 160 Gram / Sq M And Applying A Coat Of Blown Grade Hot Bitumen 90 / 15 @ 1.20 Kg / Sqm Over The Membrane And Finishing With Solar Reflective Bituminous Aluminium Paint @ 0.10Kg / Sq M Laid Over Rcc Roof Slab By Authorized Applicators Of Manufacturer M / S Iwl India Ltd. Make Of App Memberane Iwl India Ltd Make Of Bitumen & Primer Stp Ltd" 2.00 M & L Preparation Of New Steel Surfaces Of Any Description Over 10Cm In Width Or Girth And Applying Two Coats Epoxy Based Paint Make - Asian 3.00 M & L Preparation Of New Plastered Surfaces And Providing Two Coats Exterior Emulsion Paint Over A Coat Of Primer Make - Asian 4.00 S & F 8Mm Laminated Sheet Glass With Silicon Sealant, Rubber Gasket And Other Fittings
Supply Of Spares For Mahindra And Mahindra:-1.01 Part No. 7401Aap00480n Tenth Leaf 2.02 Part No. 7401Aap00490n Eleventh Leaf 3.03 Part No. 6109Caa00010n Glass Door Lh 4.04 Part No. 0304Eav00010n Assy Water Pump S / F 6 Cyl 5.05 Part No. 0311Dav00040n Pump Timing Cover 6.06 Part No. 0302Aav00030nliner 6 Cyl Genset 7.07 Part No. 0302Aav00110n O Ring Liner 8.08 Part No. 0302Bav00080ni Cyl Head Gasket 1.4 9.09 Part No.0501Baa00541n Sleeve Yoke Slip 10.10 Part No.0501Ba0061n Flange Yoke Propeller Shaft 11.11 Part No. 0501Ba1090n Companion Flange Axle 12.12 Part No.0606Aa3271n Master Cyl Assy 13.13 Part No. 00381665 Uj Cross
Supply Of Spares For Mb Unit ( D M Plant ) In Sul Acid Plant:-15 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 33 Nb Rubber Grommets" 16 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 150 Nb Msrlrc Header With 1 No. Gasket" 17 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant Msrc Lateral Clamping And Support Members ( 8 Pcs / Set ) " 18 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant Ss-316 Lateral Locating Pegs " 19 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant Ss 316 Tie Bolts" 20 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant Mark 801 Strainers" 21 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 3 / 8 X 135Mm Long Ss-316 Studs With 4 Lock Nuts And 2 Washers" 22 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 3 / 8 X 60Mm Long Ss-316 Studs With 4 Lock Nuts And 2 Washers" 23 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 3 / 8 X75mm Long Ss 316-Studs With 4 Locknuts And 2 Washers" 24 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 1 / 2 X 75Mm Long Ss-316 Studs With 4 Lock Nuts And 2 Washers" 25 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 1 / 2 X 85Mm Long Ss-316 Studs With 4 Lock Nuts And 2 Washers" 26 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 5 / 8 X 90Mm Long Ss316 Studs With 4 Locknuts And 2 Washers" 27 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 33Nb Pvc Laterals ( 36 Pcs / Set )
Supply Of Spares For Mb Unit ( D M Plant ) In Sul Acid Plant:-1 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant Pp Mark V Strainers For Sba And Sac Units Bottom Collecting Systems " 2 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 200 Nb Msrlrc Header For Sac Unit Bottom Collecting System " 3 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 3 / 8 X 110Mm Long Full Thread Ss-316 Studs With 4 Hex-Lock Nuts And 2 Spl Plate Washers For Middle Collection System Of Sac And Sba Units " 4 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 80Nb Msrlrc Internal Bend For Sac Unit Inlet Distribution System " 5 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 80Nb Gasket Drilled To Bstd For Sac Unit Inlet Distribution System " 6 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 80 Nb Bell Mouth Pvc Funnel For Sac Unit Inlet Distribution System " 7 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 3 / 8 X 70Mm Long Full Thread Ss-316 Studs With 4 Hex-Lock Nuts And 2 Spl Plate Washers For Middle Collection Systems Of Sba And Sac Units " 8 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 50 Nb Msrlrc Internal Bend For Sba Unit Inlet Distribution System " 9 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 50 Nb Msrlrc Strainers For Sba Unit Inlet Distribution System " 10 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 1 / 2 X 50Mm Long Full Thread Ss-316 Studs With 4 Hex-Lock Nuts And 2 Spl Plate Washers For Bottom Collection System Of Sac Units " 11 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 150 Nb Pvc Inlet Distribution Pipe" 12 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 22 Nb Pvc Laterals ( 24Pcs / Set ) " 13 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant Pvc Packing For Header Support Cleat" 14 "Spares For Mixed Bed Unit ( Dm Plant ) In Sulphuric Acid Plant 22 Nb Rubber Grommets"
Supply Of Spare For Veps:-21.21 Part No. 0302Aav00050n Gasket Timimg Case Block For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 22.22 Part No.0314Dav00020n Gasket Breather Housing Block For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 23.23 Part No.0305Bav00140n Gasket Fuel Injection Pump For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 24.24 Part No.0303Dav00110n Oil Cooler Head Gasket For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 25.25 Part No.0311Dav00170n Gasket Inspection Cover For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 26.26 Part No.0302Aav00340n Gasket Front Cover For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 27.27 Part No.0311Dav00020n Gasket Valve Cover Av For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 28.28 Part No.0304Dav00020n Gasket Water Inlet Connection For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 29.29 Part No.0302Cav00250n Gasket Intake Manifold Assy For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 30.30 Part No.0302Cav00640n Gasket Intake Cuve Plastic For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 31.31 Part No. 0302Dav00040n Manifold Gasket For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 32.32 Part No. 0311Aav00020ni Seal Crank Shaft For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 33.33 Part No. 0302Dav00360n Gasket Exhaust Elbow -Mech For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc
Supply Of Spare For Veps:-1.01 Part No. P4800741 / 3668270 Rotten Chain For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 2.02 Part No. P4805535 Pto Idler Shaft Bearing Nut For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 3.03 Part No. P4800112 Distance Piece For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 4.04 Part No.P4801704 Bearing Bracket For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 5.05 Part No.P4800126 Pto Shaft Bearing Rubber For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 6.06 Part No.P4800302 Ball Bearing For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 7.07 Part No.Wood Ruff Key For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 8.08 Part No. P4802909 Pto Idler Shaft For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 9.09 Part No.P4800127 Pto Bearing Oil Seal For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 10.10 Part No. P4801616 Propeller Shaft Sprocket For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 11.11 Part No. P4801218 Propeller Shaft Sprocket Hub For A / L Stallian Recovery Ba No. 05F-22163 Of 81 Rcc 12.12 Part No. Nk Fly Wheel Assy For A / L Recover Stallian 13.13 Part No. 7401Aap00400n Assy Front Spring Complete For M / M Torro Dumper 16E-73292 & 16E-73307Of 126 Rcc 14.14 Part No. 6119Aad00060n Cab Assy Large / Latch For M / M Torro Dumper 16E-73307Of 126 Rcc 15.15 Part No. 7402Aaq00180n Centre Bolt For M / M Torro Dumper 16E-73307Of 126 Rcc 16.16 Part No. 0302Bav00080ni Cyl Head Gasket 1.4 ( Def.Epmb ) For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 17.17 Part No.0302Bav00080nicyl Head Gasket 1.4 ( Def.Epmb ) For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 18.18 Part No.0303Cav00060n Gasket Oil Pan / Engine Block For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 19.19 Part No. 0305Gav00540n Gasket Exh Manifold Turbo For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc 20.20 Part No.0305Gav00080n Gasket Turbo Oil Return For M&M Gen Set 160 Kva Srl. 139 Of 55 Rcc
Supply Of Mechanical Seal, An-62023
Supply Of Pump Spares:-1.01 Casing Wear Ring For Benfield Solution Pumps ( P-301A / B / C ) And Benfield Booster Pumps ( P-307A / B / C ) , According To Rcf Drg. No. Th / 011 / 2046 Rev. 2, Size - Od = 251 Mm, Id = 217 Mm, 40 Mm Width, Material Conforming To Astm A 747 Grade Cb7cu-1 With Material Test Certificate Including Solution Annealing Results 1.02 Casing Wear Ring For Benfield Solution Pumps ( P-301A / B / C ) And Benfield Booster Pumps ( P-307A / B / C ) , According To Rcf Drg. No. Th / 011 / 2046 Rev. 2, Size - Od = 251 Mm, Id = 223 Mm, 40 Mm Width, Material Conforming To Astm A 747 Grade Cb7cu-1 With Material Test Certificate Including Solution Annealing Results 1.03 Wear Ring For Impeller - De / Coupling Side For Benfield Solution Pumps ( P-301A / B / C ) And Benfield Booster Pumps ( P-307A / B / C ) , According To Rcf Drg. No. Th / 011 / 2046 Rev. 2, Material Conforming To Astm A 747 Grade Cb7cu-1 With Material Test Certificate Including Solution Annealing Results 1.04 Wwear Ring For Impeller - Nde / Anticoupling Side For Benfield Solution Pumps ( P-301A / B / C ) And Benfield Booster Pumps ( P-307A / B / C ) , According To Rcf Drg. No. Th / 011 / 2046 Rev.2, Material Conforming To Astm A 747 Grade Cb7cu-1 With Material Test Certificate Including Solution Annealing Results 1.05 Bearing Housing For Pump-P-311, Material Of Construction-Ms, As Per Rcf Drawing No Th / 011 / 2245. 1.06 Guide Bearing Bush, Material Of Construction- Teflon, As Per Rcf Drawiing No Th / 011 / 6503.
Quotation For Supply Of Cat A Spares For Mahindra Camper:-49 Ns 089335 Kit Caliper ( Major ) 50 Ns 082597 Disc Brake 51 Ns 028630 Brake Hose Frt 52 Ns 098595 Brake Tube Frt Lh 53 Ns 000A866 Nut Retaining Wheel Brg 54 Ns 099825 Toothed Lock Washer 55 Ns 029548 Cable Bonnet Realease 56 Ns 03030B0040n Pipe Oil Vacuum Pump Inlet 57 Ns 0303Eb0180n Oil Line Turbo Inlet 58 Ns 0606Ca0620n Tube Rear Wheel Lh 59 Ns 0606Ca0520n Tube Rear Wheel Lh 60 Ns 029186 Brake Tube Frt Rh 61 Ns 0401Ba1760n Kit Shock Absorber Bushing Frt 62 Ns 0502Ca0180n Oil Seal Axle Shaft Outer
Quotation For Supply Of Cat A Spares For Mahindra Camper:-01 Ns 51819 Belt Alternator 02 Ns 9420000388 Fuel Filter Assy 03 Ns 0024772 Eng Oil Filter Spin On 04 Ns 71817 Air Cleaner Filter 05 Ns 95264 / 3210028 44 Clutch Driven Plate Assy 06 Ns 85106 Clutch Pressure Plate 07 Ns 89078 / 917773 Cup Wheel Bearing Inner 08 Ns 97077 / 052880 Cone Wheel Bearing Inner 09 Ns 89076 / 925447 Cup Wheel Bearing Outer 10 Ns 89075 / 925446 Cone Wheel Bearing Outer 11 Ns 0502Ca0080n Hub Oil Seal Front & Rear 12 Ns 0606Aa1271n Master Cylinder Assy 13 Ns 0602Ba3281n / 55873 Kit Lining Set 14 Ns 0603Ba0461n / 76650 Kit Pad Assy 15 Ns 0603Ba0441n / 88483 Caliper Assy Lh 16 Ns 0603Ba0451n Caliper Assy Rh 17 Ns 031133 / 55876 Wheel Cylinder Assy Lh & Rh 18 Ns 10020A0230n Accelerator Cable Assy 19 Ns 906929 / 038166 Uj Cross 20 Ns 0802Ca0861n Clutch Slave Cylinder 21 Ns 0605Ba0291n Cable Parking Brake Rear 22 Ns 99805 Tie Rod Socket Assy Left M 18 23 Ns 99806 Tie Rod Socket Assy Right 24 Ns 99807 Master Tie Rod Socket 25 Ns 27511 Lower Ball Joint 26 Ns 27510 Upper Ball Joint 27 Ns 070175 Bush Shock Absorber Eye 28 Ns 029745 / 89945 Shock Absorber Front 29 Ns 89944 Shock Absorber Rear 30 Ns 029726 / 089942 Assy Rear Leaf Spring Complete 31 Ns 029726 / 084818 Assy Front Leaf Spring Complete 32 Ns 079756 Rear Spring Shakle Bushing 33 Ns 084777 Silent Block Bush 34 Ns 912593 Bush Pivot End 35 Ns 97964 Bushing 36 Ns 0802Ca0751n Assy Clutch Master Cylinder 37 Ns 0802Ca0851n Clutch Release Brg 38 Ns 0310Bb0190n Gasket Rocker Arm Cover 39 Ns 099828 Insulator Front 40 Ns 069895 Insulator Engine Rr Support 41 Ns 0703Bc0010n Out Put Clutch Shaft Oil Seal 42 Ns 027526 Oil Seal Frt Axle Shaft 43 Ns 098314 Guide Axle Shaft 44 Ns 098313 Oil Seal Axle Shaft Gear Carr.End 45 Ns 027525 Bushing Wheel Brg Spindle 46 Ns 0502Aa1040n Dust Shield 47 Ns 0502Ca0210n Oil Seal Axle Shaft Inner 48 Ns 084841 Bushing Stabilizer Bar
Supply Of Material For Repair Of Mukerianhydle Channel Head Regulator Gate No. 1, 2, 3, 4, 5, 6, 7 And 8 For Proper Regulation Of Discharge.-1.01 Vertical Rubber Seal 72Mm X 14 Mm Od 44Mm X Id 25 Mm X 3500Mm - As Per Is Specifications ( Is- 11855 ) 2 C.S.K. Head Screw - ( As Per Sample ) 3 Spherical Roller Bearing 22314. - Make - Skf / Fag / Nbc 4 Oxygen Gas 5 Acetylene Gas 6 Top Rubber Seal 72Mm X 14Mm Od 44Mm X Id 25Mmx 8000Mm - As Per Is Specifications ( Is- 11855 ) 7 G.I. Nut & Bolt Of Sorts. - ( As Per Sample ) 8 Pin And Nut For Guide Roller - ( As Per Sample ) 9 Coupling Set Big ( As Per Sample ) 10 M.S. Electrode 4 X 450Mm - Make Advani / D&H 11 Cotton Waste 12 M.S Chequered Plate 6 Mm Thick 13 Gear Oil H.P. 90 For Gear Box - Make - Hp / Ioc / Bp 14 Grease M.P. - Hp / Ioc / Bp 15 Wheel Bearing Grease. - Hp / Ioc / Bp 16 Limit Switch 16 Amp. - Make - Bch / Essan / L&T 17 Contactor 16 Amp 415Volt A.C. Make - Bch / Essan / L&T 18 P.V.C. Copper Wire 10 Sqm. Mm Make- Havells / Finolex / Polycab 19 Relay 4 To 6 Amp - Make - Bch / L&T / Siemen 20 I.C.T.P.N. Switch 32 Amp - Make - Geco / Meco / Marco 21 Brake Coil 440V - Make - Bch / L&T / Siemen 22 Phase Light Indicator - Make - Bch / L&T / Siemen 23 Cardium Compound - Make - Hp / Ioc / Bp 24 Transformer Oil For Welding Set - Make - Hp / Ioc / Bp 25 H.S. Diesel
Supply Of Material For Repair Of Shah Nehar Barrage Gate No 1, 2, 3, 4, 7, 8, 9, 10, 11, 12, 13, 14 , 15, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 48, 50, -1 Vertical Rubber Seal 72Mm X 14 Mm Od 44Mm X Id 25 Mm X 6700Mm - As Per Is Specifications ( Is-11855 ) 2 Bottom Rubber Seal 80 X 10 X 9050Mm- As Per Is Specifications ( Is-11855 ) 3 C.S.K. Head Screw - ( As Per Sample ) 4 G.I. Nut & Bolt Of Sorts.- ( As Per Sample ) 5 Steel Wire Rope 22Mm Dia, - Make - Naveen / Usha Martin 6 Spherical Roller Bearing 23124 - Make - Skf / Fag / Nbc 7 Oxygen Gas 8 Acetylene Gas 9 M.S. Electrode 4 X 450Mm Make - Advani / D&H 10 Cotton Waste 11 M.S. Chequered Plate 6 Mm Thick 12 Greas M.P. - Make Ioc / Hp / Bp 13 Gear Oil H.P. 90 For Gear Box - Make Ioc / Hp / Bp 14 Wheel Bearing Grease. - Make Ioc / Hp / Bp 15 Limit Switch 16 Amp. Make - Bch / Essan / L&T 16 Contactor 16 Amp 415 / 440V Make - Bch / Essan / L&T 17 P.V.C. Copper Wire 10 Sqm. Make - Havells / Finolex / Polycab 18 Relay 4 To 6 Amp - Make Bch / L&T / Siemen 19 A.C. Solenoid Brake Set Complete - Make Bch / L&T / Siemen 20 I.C.T.P.N. Switch 16 Amp / 415V Make Geco / Meco / Marco 21 Brake Coil 440V - Make Bch / L&T / Siemen 22 I.C.T.P.N. Switch 32 Amp / 415V. - Make Geco / Meco / Marco 23 Cardium Compound - Make Ioc / Hp / Bp 24 Heat Transfer Fluid Servotham Medium Code No. 4802 ( Transformer Oil ) - Make Ioc / Hp / Bp 25 H.S. Diesel 26 L.E.D Bulb Of Standard Reputed Company 20W - Havells / Philips / Bajaj / Syska 27 Fulorescent Tube Light 36 / 40 Watt. - - Havells / Philips / Crompton 28 Electronic Ballast For Ftl 36 / 40 Watt. - Havells / Philips / Crompton
Supply Of Rubber Seal For 125Mm Fsapds Dop 550Mm
Supply Of Spiral Wounded Gasket
Supply And Delivery At Site Isi Mark Socket And Spigot Joining System Centritugally Cast Dl ( K9 ) Pipes ( L5omm Dia ) Confirming To Is 8329- 2000 ( Third Revision ) In Standard Length 4M, 5M, 5.5M, 6M For Push On Joints ( Rubber Gasket ) With Internal Cement Mortar Lining And External Protection By Metallic Zinc Coating With Finish Layer Of Epoxy / Bituminous Coating Of Outside As Per Is 8329-2000 Specification With Necessary Joining Material Rubber Gasket ( Is 5382:1985 ) Including Transportation , Loading , Unloading And Staking At Site Including Free Supply Of Polythene Sleeves For Laying ( A ) 150Mm Dia D.L. K-9 2 ( A ) 200Mm Dia D.L. K-9
Tender For Replacement Of Seal Kit And Servicing Of Old Hydraulic Cylinder Assembly Of Intake Gate At 2X15 Mw, Bhps-Ii, Mppgcl, Silpara.
Tender For Tool , Machinery And Equipment’S : - 346 Ring Spanner Off Set 4.7Mm To 16Mm 347 Round Punch 3Mm, 4Mm, 6Mm 348 Scissor, Gasket Cutting Stainless Steel Length 25Mm 349 Screw Driver, Plastic Handle, 6Mm Tip Length 100Mm To 150Mm 350 Screw Driver, Plastic Handle, Flat Tip 10Mm Tip Length 200Mm & 250Mm 351 Screw Driver, Plastic Handle, Handle 3Mm Tip Flat Tip Length 100Mm To 150Mm Insulated 352 Scriber 150Mm Length 353 Sensor Thermometer ( Digital ) -50 Degree Celsius To150 Degree 23Celsius 354 Service Man Thermometer In Metal Case - 30 C To +30 C 355 Snip Sheet Metal Curved Nose 200 Mm 356 Snip Sheet Metal Straight Nose 200 Mm 357 Soldering Iron Exchangeable Copper Tip 65 Watts 358 Spanner Double Ended 19Mm To 31.8 Mm 359 Spanner Double Ended 4.7Mm To 16Mm 360 Spirit Level Precision Metallic 200Mm 361 Split Phase Induction Motor ¼ Hp, 230 V 362 Stakes [ Different Types ] 100Mm 363 Star Delta Starter 2 Hp 364 Stop Watch 365 Surface Gauge Universal 150 Mm 366 Surface Plate 45 X45 Cms 367 Swaging Tool, Punch Type, Set Of Size For Tube. 4.7Mm To 16Mm O.D 368 Swaging Tool, Screw Type 4.7Mm To 16Mm O.D 4.7Mm To 16Mm O.D. With Adaptor Set Of Size For Tube 369 Tachometer Digital, Multirange 0 R M P To 3000 R M P.Portable Small Size In Leather Case 370 T-Allen Key Set Size 5 / 32" To 1 / 8" 371 Tap Set With Matching Drills ¼’’ To 5 / 8’’ 372 Tap Set With Matching Drills 3 Mm To 16Mm 373 Tape Measuring 10M Graduation In Mm `
Tender For Testing Of Lpg Pipe Line -Testing Of Lpg Pipeline: Comprehensive Testing Of 50 Nb Lpg Pipe Line Include External Visual, Utt, Die Penetration Test, Hydro Test, Magnetic Particle Test And Issue General Certificate And Provide Isometric Drawing, All The Test Should Be Done As Per Standard, Die Penetration Should Be Done For All The Joint And Magnetic Particle Should Be Done At Least For 10% Of Joint, Required High Tensile Stud/Nuts Spiral Wound Metallic Gasket Should Be Supplied By You, Wherever You Open Flange Joint For Hydro Test, All The Tools, Tackles And Ppe Will Be Provided ,Testing Of Lpg Pipeline: Comprehensive Testing Of 80 Nb Lpg Pipe Line Include External Visual, Utt, Die Penetration Test, Hydro Test, Magnetic Particle Test And Issue General Certificates And Provide Isometric Drawing, All The Tests Should Be Done As Per Standard, Die Penetration Should Be Done For All The Joint And Magnetic Particle Should Be Done At Least For 10% Of Joints, Required High Tensile Stud/Nuts Spiral Wound Metallic Gasket Should Be Supplied By You, Wherever You Open Flange Joint For Hydro Test, All The Tools , Comprehensive Testing Of 100 Nb Lpg Pipe Line Include External Visual, Utt, Die Penetration Test, Hydro Test, Magnetic Particle Test And Issue General Certificates And Provide Isometric Drawing. All The Tests Should Be Done As Per Standard. Die Penetration Should Be Done For All The Joint And Magnetic Particle Should Be Done At Least For 10 % Of Joints. Required High Tensile Stud/Nuts Spiral Wound Metallic Gasket Should Be Supplied By You, Wherever You Open Flange Joint For Hydrotest. All The Tools, Tackles And Ppe Will Be Provided By You , Testing Of Lpg Pipeline: Comprehensive Testing Of 150 Nb Lpg Pipe Line Include External Visual, Utt, Die Penetration Test, Hydro Test, Magnetic Particle Test And Issue General Certificates And Provide Isometric Drawing, All The Tests Etc
Annual Repair Contract For Spares For Turbines At Mr For A Period Of 1 Year -Ring Throw Valve Rod, D-R P/N. Dr2541406800im, Dr Ref No.28 &817, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: Pyrtsr No: X09836k095006, Gear Hel Gov Tf9 2200Rh, D-R P/N. Dr2631082801im, Dr Ref No.29, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No, Gear Worm Gov Tf9 2200Rh, D-R P/N. Dr2531082601im, Dr Ref No.30, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: Pyrtsr No, Valve Assy Hand 9-12M/L, D-R P/N. Dr2240750700im, Dr Ref No.38, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: Pyrtsr No: X09836k095006 X11802k105013 -1/2Item Specifications, Gasket, D-R P/N. Dr2540584900im, Dr Ref No.114, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: Pyrtsr No: X09836k095006, Packing Oil Dam .75, D-R P/N. Dr2541249500im, Dr Ref No.800, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: Pyrtsr No: X09836k095006, Collar Valve , D-R P/N. Dr2540467000im, Dr Ref No.804, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model , Kit Rollpin, D-R P/N. Dr2806-06Im, Dr Ref No.806, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: , Gasket Gov , D-R P/N. Dr2541142600im, Dr Ref No.810, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description Spindle Luck Nut, D-R P/N. Dr2541142600im, Dr Ref No.809, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description, Locknut Gov Ball Bearing, D-R P/N. Dr2541050500im, Dr Ref No.811, Tag No. : 14C2 Lopt, Make: Dresser- Rand Long Description: Spare For Model No: Pyrtsr No: X09836k095006item Etc
Supply Of Gasket For Compressor And Cooler
Tender For Lean Amine Pump At Hpcl Mumbai Refinery - 1. Completed Hpcl Data Sheet 2. Leaflet/Catalogue/Standard Curve Of The Offered Model 3. Performance Curve 4. List Of Similar Installation 5. Ga Drawing For Pump, Driver And Accessories 6. Foundation Plan - Anchor Bolt Location 7. Cross-Sectional Drawing For The Following A. Pump B. Mechanical Seal C. D. E. 8. Part List And Material Of Construction 9. Coupling Data & Drawing 10. Gear Box Data & Drawing 11. Cooler Data & Drawing 12. Mechanical Flushing Diagram 13. Cooling Water Piping Diagram 14. Lubrication Oil Piping Diagram For Pumps And Auxiliaries 15. Lubrication Schedule And Requirements 16. Data For External Forces And Moments 17. Gd2 Value Referenced To Motor Shaft 18. Speed Torque And Time Curves 19. Material Certificates For: Casing, Shaft Sleeve, Impeller, Wear Ring, Etc. 20. Test Records For Npsh, Performance Test, Vibrations Tests And Noise Level Test 21. Itemized List Of Spares For Two Years Running As Per List In Tender Line 22. Interchangeability Chart For Spare Parts Of Various Models 23. Installation, Operating & Installation Manuals 24. Mechanical Catalogue Containing Items 1 To 23 Above
Supply Of ''''Set Of O-Rings / U-Cup'''' Of Flowserve Make Mechanical Seal. The One Set Of O-Rings / U-Cup Consist Of Sr. No. 4, 13, 18, 19 And 71 Of Drg. No.2H-88786 Rev-3. ( Drawing Enclosed )
Supply Of Plate Pack Set ( 160 No. Of Plates+ 160 No. Of Gaskets Fitted On The Plates )
Supply Of Valves And Strainers At Sagar And Gwalior - Strainer,Pipe,Y-Type,Butt-Weld; Material:Carbon Steel; Mat Spec,Body:Astm A333 Grade 6; Mat Spec,Screen:Stainless Steel 316; Design Spec,Flange(S):Ansi B16.5; Facing,Flange:Raised Face; Pressure Designation:Class 150; Size:150 Mm; Service:Sour And Low Temperature, Strainer,Pipe,Y-Type,Butt-Weld; Material:Carbon Steel; Mat Spec,Body:Astm A333 Grade 6; Mat Spec,Screen:Stainless Steel 316; Design Spec,Flange(S):Ansi B16.5; Facing,Flange:Raised Face; Pressure Designation:Class 150; Size:80 Mm; Service:Sour And Low Temperature, Valve,Gate; Nominal Size:350 Mm; Design Spec,Pressure Rating:Class 150; Type Of End Connection:Flanged; Material,Body:Carbon Steel; Design Spec:Api Std 600; Type Of Face:Raised Face; Type Of Closure Member:Wedge; Type Of Bore:Full; Type Of Construction:Outside Screw And Yoke; Type Of Bonnet/Cover:Bolted; Type Of Bonnet/Cover Gasket:Spiral Wound; Type Of Seat:Metal; Uni/Bi-Directional:Bi-Directional; Service:Sour; Mat Requirement,Sour Service:Nace Mr-01-75 (Version 2002); Temperature,Min:Minus 20 Deg C; Temperature,Max:Plus 400 Deg C; Emission Class:B; Mat,Trim:Aisi 316/Stellite 6; Mat,Seals:Graphite; Mat Spec,Body:Astm A105 Normalised; Mat Spec,Bonnet:Astm A216 Grade Wcb; Mat Spec,Gland Flange:Astm A216 Grade Wcc; Mat Spec,Gland Ring:Astm A182 Grade F 316L; Mat Spec,Closure Member:Astm A105 Normalised; Mat Spec,Closure Memb Facing:Stellite 6; Mat Spec,Stem:Astm A182 Grade F 316L; Mat Spec,Seat Facing:Stellite 6; Mat Spec,Back Seat Facing:Stellite 6; Mat Spec,Gasket Metallic Part:Astm A240 Type 316; Mat Spec,Gasket Seal Element:Graphite; Mat Spec,Pack Rings,Top/Bot:Braided Graphite; Mat Spec,Pack Rings,Interm:Braided Graphite; Mat Spec,Bolts/Studs:Astm A193 Grade B7m; Mat Spec,Nut(S):Astm A194 Grade 2Hm; Inspection Category:Ic-I; Tec Classification Code:Ga-Fw-Mg-Bd-Te-Bb-Xx-I10434-St Etc..
Expression Of Interest Processing And Supply Of Copper Based Metal Matrix Composite Seals Through Power Metallurgy Route For Launch Vehicle Application
Tender For Steam Driven Rod Pump At Hpcl Mumbai Refinery - Steam Driven Rod Pump As Per Attached Data Sheet Long Description: Scope Of Job: One Set Comprises Of A. Steam Driven Rod Pump As Per Attached Data Sheet, Conforming With Api-674. Pump To Be Portable Skid Mounted With Replaceable Conical Seats On Liquid Ends. Both The Liquid And Steam End Pistons Each Fitted With Two Cast Iron Piston Rings.B. One Set Of Mandatory Spares Comprising Of: 1. Suction Valves - Qty 4 2. Discharge Valve - Qty 4 3. Pump Rod Packing - Qty 2 Sets 4. Piston Rod Packing - Qty 2 Sets 5. Valve Spindle Packing - Qty 2 Sets 6. Gasket Set - Qty 2 7. Piston Ring - Qty 4 8. Bucket Ring - Qty 6 9. Steam Piston - Qty 210. Liquid Piston - Qty 2C. One Set Of Commissioning/Startup Spares Comprising: 1. Pump Packing Set - Qty 1 Set 2. Gasket Set - Qty 1 Setitem Specifications
Supply Of Petty Tools :- 100 Wooden Mallet / Nylon Mallet 500 Gm Good Finish 101 Round Punch 3Mm, 4Mm, 6Mm 102 Screw Driver, Plastic Handle, 103 Screw Driver, Plastic Handle, Flat Tip 6Mm Tip Length 100Mm- 150Mm 104 Philips Screw Driver - Complete Set With Lather Case105 Screw Driver, Plastic Handle, Flat Tip 10Mm Tip Length 200Mm And 250Mm 106 Soldering Iron Exchangeable 65 Watt Copper Tip 107 Tenon Saw 250Mm 108 Firmer Chisel 6, 12, 25Mm 109 Rawal Plug Tool 6Mm 110 Fire Buckets 10Ltr 111 Pipe Cutter Miniature For Copper Tube 3Mm To 16Mm Dia 112 Ratchet Spanner 6.4 Sq. Mm Reversable 113 Ring Spanner Off Set 4.7 Mm - 16Mm 114 ( Hollow ) Punch Hole For Cutting Gasket 4.7 - 16Mm Dia 115 Pipe Wrench 50Mm - 150Mm 116 Hand Blower Portable Complete 1 / 10Hp 117 Spirit Level Precision Metallic 200Mm 118 Filler Gauge 0.05 Mm To 1 Mm 119 Instrumentation Screw Driver Set 100Mm 120 Lcd Projector / Led / Lcd Tv 121 Foot Rule / Steel Tape Standard Size 122 Steel Measuring Scale 123 Oil Stone 200X50x 25Mm 124 Hand Brush For Cleaning 450Mm 125 Trammel Standard Make 126 Rip Saw 600Mm 127 Cross Cut Saw Standard Make 128 Key Hole Saw 250Mm 129 Fret Saw Frame 150Mm 130 Compass Saw 350Mm 131 Edze 15Kg 132 Trying Plane Metal 450Mm X 60Mm 133 Plane Rivet Adjustable 250Mm X9mm Cutter 134 Plough Plane With Set Of Upto 12Mm Width 135 Spoke Shaves 50Mm Cuter 136 Plane Adjustable Circular 250Mm 137 Moulding Plane Set Standard Make 138 Cabinet Scraper 100Mm 139 Gauge Chisel, Firmer, 6, 10, 12, 16, 20Mm 140 Gauge Chisel, Scribing
Procurement Of Mechanical Seal For Tgecw And Sgecw
Mechanical Seal For Vacuum Pump Stage-2
Supply Of Various Sizes Of Gland Packing And Bonnet Seal Rings For Boiler Unit No. 3 & 4 (Stage-Ii) At Sikka Tps.
Tender For Purchase The Spare Parts For Vehicle No. Gj6g-6343 - Pressure Plate ,Clutch Plate Fan Type ,Fly Wheel Inner Plate ,Clutch Bearing With Hub ,Fly Wheel Bearing ,Pressure Plate Spring Set ,Withdrawl Plate With Liner ,Fingure Pad ,Rear Wheel Seal Outer ,Rear Wheel Seal Inner ,Front Wheel Oil Seal ,Fuel Filter Set ,Oil Filter.
Tender For A set of Gasket ITEM LIST :- (1) A set of Gasket for HHP Locomotive, consisting of 3 nos. items as per annexure attached.
Tender For Head Gasket ITEM LIST :- (1) Head Gasket for HHP Locomotive EMD Pt. No.-846400 and DLW Pt.No.-16170039
Tender For item code: 081 - gasket air duct for locoITEM LIST :- (1) GASKET AIR DUCT TO TURBO CHARGER EDGE AS PER EMD PART NO. 40034637.
Tender For Annual Rate Contract For Repairing Of Motor Pump Sets For Different Buildings Of Vadodara Municipal Corporation. - Removing The Pump Set From Foundation After Removing Suction & Discharge Connection Pipes & All Wiring Connections Taking It To Workshop & Open It For Fault Finding , Refitting The Same, After Carrying Out Repairing, Taking Back On Site Refitting On Foundation With Pipe & Wiring Connections & Put In Working Condition. (Excludes Cost Of Repairing. Includes To & From Transportation) (A) Up To 3 Hp, Removing Deteriorated Gasket, Gland Packing, Washer Nuts & Bolts Before Refitting Of Motor Pump Set (A)Up To 3 Hp, Rewinding Of 1 Hp 230 V. Single Phase Motor As Per Original Winding Design By Using Super Enameled Copper Wire And Putting The Same In Working Condition As Per Original, Rewinding Of 2 Hp 3 Phase 440 V. Motor As Per Original Winding Design By Using Super Enameled Copper Wire And Putting The Same In Working Condition As Per Original, Rewinding Of 3 Hp 3 Phase 440 V. Motor As Per Original Winding Design By Using Super Enameled Copper Wire And Putting The Same In Working Condition As Per Original, Replacing Worn-Out Unserviceable Ball Bearing / Roller Bearing Suitable For Following Motors For Mono Block Pump Sets A) For 1 Hp Motor / Pump, Providing Approved Make Tripple Pole Cast Iron Clad/Metal Clad Switch Rewirable Fuse With Neutral Link 415/500 V. Confirming To Iss A) 32 A. , Erection & Connection Charges For 32 A, Tp As Following B) On Polished Wooden Block., Providing And Erecting Isi Marked Pvc Insulated Pvc Shethed Flat Flexible Submercible Copper Cable Approved Make Of Following Size A) 3 Core X 2.5 Sq. Mm, Replacement Of Bronze / Gunmetal Impeller For Open Well Horizontal Submersible Pump Set 1 Hp To 5 Hp, Replacement Of Bronze/ Carbon Thrust Bearing With Fibre Plate & Housing For (B) Lead (I) 150Mm.
Supply Of Spares For New Allenberry Gear Box Model-Scn355 Of Chp Lingaraj Ocp ( Exclusively For Oem ) -1 / Input ( 1St ) Stage Shaft 20T With Key And Bearing & Oil Seal ( Part No: 100 ) 2 / Input ( 1St ) Stage Gear 79T ( Part No: 402 ) 3 / Intermediate ( 2Nd ) Stage Shaft 21T With Key, Bearing Spacer ( Part No: 400 ) 4 / Intermediate ( 2Nd ) Stage Gear 75T ( Part No: 302 ) 5 / Output Stage Shaft 22T With Key, Bearing Spacer ( Part No: 300 ) 6 New Item Spare For New Allenberry Make Gear Box Type And Size- Scn355, Ratio 50:1:- Complete Fabrication Housing Top & Bottom Cover Bolted Together Along With Caps And Covers
Supply Of Spares Of Bareja Make Pump, Model 123 C 4-1 Rotor, Part No. 7023 2 Coupling Rod, Part No. 7025 3 Coupling Rod Pin, Part No. 7027 4 Coupling Rod Bush, Part No. 7026 5 Shaft, Part No. 7024 6 Gland Packing, Part No. 7035 7 Stator Assly., Part No. 710C 8 Rotor, Part No. 7023 9 Coupling Rod, Part No. 7025 10 Coupling Rod Pin, Part No. 7027 11 Rotor, Part No. 7023 12 Coupling Rod, Part No. 7025 13 Rotor, Part No. 7023 14 Coupling Rod, Part No. 7025 15 Coupling Rod Pin, Part No. 7027 16 Coupling Rod Bush, Part No. 7026 17 Shaft, Part No. 7024 18 Gland Packing, Part No. 7035 19 Stator Assly., Part No. 710C 20 Rotor, Part No. 7023 21 Coupling Rod, Part No. 7025 22 Coupling Rod Pin, Part No. 7027 23 Rotor, Part No. 7023 24 Coupling Rod, Part No. 7025 25 Coupling Rod Pin, Part No. 7027 26 Coupling Rod Bush, Part No. 7026 27 Shaft, Part No. 7024 28 Gland Packing, Part No. 7035 29 Stator Assly., Part No. 710C 30 Rotor, Part No. 7023 31 Coupling Rod, Part No. 7025
Supply Of Spares For Elecon Make Gear Box, Model Kbh280-1 Input Pinion With Spiral Beval Wheel 2 Out Put Shaft For Kbh 280 Ratio 20:1 3 Oil Seal For Kbh 280
Supply Of Chemflo Pump Spares Medek 100*80-400 Type, Bearing Cover , Gasket Casing, Stud /Nut, O Ring Shaft With Nut, Oil Seal Inboard , Bearing Lock Washer
Design Manufacturing , Testing , Inspection , Packing And Supply Of Double Mechnical Seals As Per Enclosed Technical Specification.
Supply Of Spares For Kirloskar Make Pump Of Model - 8Uph4m1-1 Rotating Assembly, Moc – Bronze, Part No. Subrua2 2 Pump Shaft Cw, Moc – C40, Part No. 180 3 Lock Nut, Moc – C-40, Part No. 8Uph4m1c40336 4 Gland Packing, Moc – Ch3116 5 Casing Wearing Ring Suc / Del, Moc – Bronze, Part No. 190 / 191 6 Set Of Keys, Part No. 8Uph4m1aisi410ssok1
Tender For Repairing Cum Denting & Painting Of Vehicle Regd. No. As 06D-8171 (Ambassador )- 01 Door Box With Patching 02 Mudguard Seal 03 Running Bod 04 Glass Channel Set 05 Door Panel Rubber Set 06 Door Cover Set 07 Glass Machine Set 08 Chachee Paint 09 White Supprio 2K 10 Putty 11 Hardener 12 Thinner 13 Water Paper 14 Valve Set 15 Ignition Coil Piston Ring 16 Gasket Set 17 Piston Ring 18 Valve Oil Seal 19 Valve Guide Plate 20 Valve Seat 21 Came Oil Seal 22 Timing Oil Seal 23 Timing Belt
Tender For Supply And Delivery Of Spare Parts For Vehicles No. Wb03a-9268, 1989, Wb03b-8011, 8021, 4259, Wb03d-1202, Wb03-3003 Of Distt.-Ii Garage - 01 Clutch Withdrawal Plate 02 Clutch Plate Assembly 9.5 Inch 03 Clutch Pressure Plate, Diaphragm Type 04 Clutch Rod With Gully 05 Armature 24V Tvs Lucas 06 Drive Pinion 07 Solenoid Switch 08 Bush L8881x 09 Shackle Bush 10 Distance Piece / Collar Bush 11 Propeller Shaft Yoke Assembly 12 Front Propeller Shaft Teeth 7” 13 Differential Flange 14 Centre Bearing Oil Seal 15 Clutch Master Cylinder Assembly With Oil 16 Propeller Shaft Complete Assembly (Front) 17 Propeller Shaft Complete Assembly (Rear) 18 Centre Bearing Bracket 19 King Pin With Kit.
Tender For Supply And Delivery Of Spare Parts For Vehicles No. Wb03b-8028, 8021, 4259, Wb03a-9268 Of Distt.-Ii Garage. - 01 Pto Pump(Ut) Assembly 02 Bonded Seal 03 Spring Leaf Main Cb Front 57” 04 Spring Leaf 4Th. Cb 05 Spring Leaf 5Th. Cb 06 Centre Bolt With Nut 07 Shackle Pin 08 Helper Spring Leaf Cb 32” 09 Helper Spring Leaf Cb 28” 10 Differential Oil Seal 11 Gear Box Oil Seal 12 Brake Shoe Front 13 I- Bolt (11”) 14 Bolt As Per Sample
Procurement Of Aviation Items:- Glass Cover , Clamp , Screw , Nut , Check Bolt , Hose , Hose , Lug / Endpiece , Hose , Rubber Hose , Glass Cover , Sealing Ring , Rubber Strip , Adhesive Tape , Pressure Lead In / Seal , Gasket, Canvas Cotton Green Fire Retardent
Tender for procurement of RFID tamper proof one time bolt seal for sealing of Containers for overseas exports from PDPMC, Paradip, Odisha., PDPMC/PT/EX/18-19/14
Supply of Gasket
SUPPLY OF GASKETS FOR HEAT EXCHANGER
Repairing of main spillway radial gate no. 9 to put it into proper working condition by replacement of wire rope with socket, equiliser plate, turn-buckle, pins, etc., Replacement of middle girder of hoist platform and rope drum of ERU And Replacement of side and bottom rubber seal in main spillway radial gates at Panam Irrigation Project Dist. Panchmahal
Supply Of Gasket Sheet
Tender For Design, Engineering, Manufacturing, Inspection Including Inspection By Tpia, Testing At Manufacturers Works, Packing, Supply Of The Gaskets, Gaskets
Supply Of Nitrile Based Rubber Gasket As Per Specsupply Of Nitrile Based Rubber Gasket As Per Spec
Work Of Replacement Of Gasket Of 40 Mva 132 / 33 Kv Alstom Make T / F At 132 Kv Sub-Station Amroha, Under Etd Amroha
Supply Of Seal,Fuildtransfer,200Mm,Pu,Drg.20592983
Tender For Material Procurement, Fabrication, Testing, Inspection, Packing And Forwarding Of Intake Air Duct , Exhaust Air Duct, Chimney Duct, Duct Support With Required Fasteners, Gaskets Etc
Supply Of Cat A Spares:-1.01 ( Part No:11710M80020 / Mounting Engine Rear ) 1.02 ( Part No:13700-830A0 / Cleaner Assy Air ) 1.03 ( Part No:13780-83000 / Element ) 1.04 ( Part No:15100M830a0 / Pump Assy Fuel ) 1.05 ( Part No:15410M830a0 / Filter Fuel ) 1.06 ( Part No:15710M83f00 / Injector Assy Fuel ) 1.07 ( Part No:17521M86520 / Belt Water Pump ) 1.08 ( Part No:17670M83030 / Thermostate Water ) 1.09 ( Part No:23265-70C00 / Bearing Clutch Release ) 1.1 ( Part No:22100M83060 / Cover Assy Clutch ) 1.11 ( Part No:09283M68002 / Seal Rear Oil ( 68X86x8 ) 1.12 ( Part No:14183-50G00 / Ring Exhaust Pipe Seal ) 1.13 ( Part No:14209M78020 / Mounting Centre Pipe ) 1.14 ( Part No:14209M79010 / Mounting Muffler ) 1.15 ( Part No:24780-83010 / Oil Seal Extension Case ) 1.16 ( Part No:29973-80050 / Oil Seal ) 1.17 ( Part No:89260-50C00 / Cap Assy Fuel Filter ) 1.18 ( Part No:48810-60A00 / End Tie Rod Rh ) 1.19 ( Part No:48836-70A00 / Connector Tie Rod End ) 1.2 ( Part No:48838M70a00 / Nut Lh )
Supply Of Cat A Spares:-1.01 ( Part No:22400M83060 / Disc Clutch ) 1.02 ( Part No:27200M83810 / Joint Assy Universal ) 1.03 ( Part No:2713156B00 / Yoke Joint Flang ) 1.04 ( Part No:09100M08172 / Bolt ) 1.05 ( Part No:09159-08075 / Nut ) 1.06 ( Part No:0928340027 / Oil Seal ) 1.07 ( Part No:29650M83001 / Mounting Rh ) 1.08 ( Part No:83410M80100 / Regulator Assy Rh ) 1.09 ( Part No.83440M80100 / Regulator Assy Lh ) 1.1 ( Part No:0928200002 / Oil Seal ) 1.11 ( Part No:41310M80350 / Spring Assy Rear Rh ) 1.12 ( Part No:41310M80360 / Spring Assy Rear Lh ) 1.13 ( Part No:09100M12025 / Bolt 12 X163 ) 1.14 ( Part No:41463M82000 / Pin Shackle ) 1.15 ( Part No:41700M80031 / Absorber Assy Rear Shock ) 1.16 ( Part No:51000M80900 / Cyl Assy Brake Master ) 1.17 ( Part No:55100M70430 / Caliper Assy Disc Brake ) 1.18 ( Part No:33100M80c40 / Sensor Assy Cam Possion ) 1.19 ( Part No:3491080C21 / Cable Assy Speedometer ) 1.2 ( Part No:41110M80031 / Spring Assy Front ) 1.21 ( Part No:09305M13002 / Bush Shackle ) 1.22 ( Part No:41331M62020 / Bush Spring ) 1.23 ( Part No:41600M80030 / Absorber Assy Front Shock ) 1.24 ( Part No:928350002 / Oil Seal ) 1.25 ( Part No:09265M41001 / Bearing ) 1.26 ( Part No:45610M63001 / King Pin ) 1.27 ( Part No:09265M15002 / Bearing )
Supply Of Cat A Spares:-1.01 ( Part No:55110M70a00 / Pad ) 1.02 ( Part No:55211M80010 / Disc Front Brake ) 1.03 ( Part No:53200M83310 / Shoe Set ) 1.04 ( Part No:53401M83310 / Cyl Assy Rear Wheel Rh ) 1.05 ( Part No:53402M83300 / Cyl Assy Rear Wheel Lh ) 1.06 ( Part No:38340M82c00 / Blade Assy Wiper ) 1.07 ( Part No:13400M830a0 / Body Assy Throttle ) 1.08 ( Part No:18590-81A00 / Sensor Map ) 1.09 ( Part No:38850M85720 / Relay Fuel Solenoid ) 1.1 ( Part No:09283M32042 / Seel Front Oil ) 1.11 ( Part No:11141M86512 / Gasket Cylinder Head ) 1.12 ( Part No:11189-82600 / Gasket Cylinder Head Cover ) 1.13 ( Part No:09482-00427 / Spark Plug ) 1.14 ( Part No:16510 M73080 / Filter Assy Oil ) 1.15 ( Part No:12761N70c00 / Belt Timing ) 1.16 ( Part No:12810M71c22 / Tensioner, Timing Belt ) 1.17 ( Part No:13650M50g20 / Sensor, Water Temperature ) 1.18 ( Part No:15910M830a0 / Cable Assy Accel ) 1.19 ( Part No:13420M83f00 / Sensor Throttle Position ) 1.2 ( Part No:11610M80020 / Mounting Engine Front )
Tender For Testing Of Gasket Sample Is Required With Is Standard And Reverse Engg
SUPPLY OF VARIOUS SIZES OF CHAMPION STYLE GASKETS
Procurement of Numbered Polycarbonate Seals with Sealing wire
E- Tender For The Work Of Strengthening Of Transformer Gaskets To Attend Oil Leakage For 132/22Kv , 50Mva Transformer-1 Bbl Make & Transformer- 2 Vijai Make At 132Kv Phursungi Substation Under Ehv Operation And Maintenance Division-I Pune
Supply Of Cat- A Spare:-1.01 2H.008.10.0.00 CYLINDER LINER WITH ''JOINT'' RING 1.02 2H.009.30.0.00 PISTON RING SET(105 DIA.) 1.03 4H.007.24.0.00 GASKET FOR CYL. HEAD (THICKNESS 1.22 ) 1.04 4H.024.12.0.00 PRIMARY ELEMENT 1.05 4H.024.13.0.00 SAFETY ELEMENT 1.06 06.436.01.0.00 SPIN ON FILTER FOR 1.07 04.015.02.0.00 JOINT FOR OIL SUMP 1.08 06631.02000 VALVE SEAL 1.09 4H.1308.09.0.00 K24 TURBOCHARGER
Expression Of Interest Indigenous Development Of Rubber Components:-Seal O Ring, O Ring
Procurement Of Lead Seal Half Inch Dia
supply of clip, end fitting, ring, seal, flap, retaning ring, valve assy, spring, gasket, plate, piston ring, filter, tab washer, flange mounting, stud locking, pintaper, discharge gap, housing filter, receptacle electrical sys, backing ring
Supply Of Coupler Pins For 11Kv,250A Half Couplers,11Kv/ 250 Amps Coupler Compression Gland Neoprene Rubber Bushes ( Id - 90 Mm ), Bush For 11 Kv 250A Coupler Connection Joint. ,11Kv, 500A Half Coupler Stud With Rose Washer, Cadmium Coated Mild Steel Dummy Sheet 2Mm Thick With Neoprene Rubber Gasket For 11Kv 250A Half Coupler
Supply Of Hph-6 Manhole Gasket. Design Pressure;45Kg/Sq.Cm, Temperature:350 Deg.,Medium:Water
Procurement Of An-32 Spares:-1 Reduction Gear Module 2 T / Disc Iii Stage 3 Fnda 4 Vanes Stage 5 Front Casing 6 Upper Cover Gasket 7 Bushing 8 Bushing 9 Block 10 Bushing 11 Bracket 12 Nozzle 13 Stud 14 Ring 15 Bolt Locating 16 Cover 17 Ac Clamp 18 Bolt 19 Screen Assembled 20 Shroud-Air Tap From Air Bleed Valve 21 Spring 22 Flame Igniter Assembly Lh 23 Flame Igniter Assembly, Rh 24 Disk 25 Disk Control 26 Brg Holder 27 Starter Generator Drive 28 Coupling 29 Pipe Air Delivery From Combustion Chamber 30 Pipe-Oil Return From Front Casing Ribs To 31 Pipe-Fuel Delivery To Lh Igniter 32 Ring7.52-7.55 7.57-7.60 33 Axle Gear 34 Axle Gear 35 Axle 36 Axle 37 Axle 38 Sealing Ring 39 Ring Sealing 40 Cover 41 Propeller Shaft 42 Flange 43 Ring Inner 3Rd 44 Disc 45 Ngu Lock 2Nd Stage 46 Vane 47 Nut 48 Block 49 Blank 50 Lock Stage-2 51 Nozzle Vane 1St Sta 52 Labyrinth 53 Lock Satellite 54 Ring Labryinth Seal 55 Filter Assembly 56 Deaerator Assembly 57 Ring 58 Pipe 59 Bushing Ball Bearing 60 Bushing 61 Auto Feather Pickup Assembly 62 Upper Clamp 63 Clamp 64 Bolt 65 Protecting Band 66 Split Pin 67 Blade Clamp 68 Spring Of Reducing Valve 69 Support 70 Cup With Spring 71 Bushing 72 Lock 73 Ring
Supply Of Spares Req For The Tk T-72:- ( I ) Lvi / R-72 / Nis Pin Side Fender ( Aps ) ( Ii ) Lvi / R-72 / Nis Lock Side Fender ( Aps ) ( Iii ) Lvi / R-72 / Nis Drain Plug ( Aps ) ( Iv ) Lvi / R-72 / Nis Rope Pin Big ( V ) Lvi / R-72 / Nis Rope Pin Spring ( Vi ) Lvi / R-72 / Nis Bolt & Nut ( Spider Dvr Seat ) ( Vii ) Lvi / R-72 / Nis Gasket Igb ( Viii ) Lvi / R-72 / Nis Locking Washer ( Pedal Small ) ( Ix ) Lvi / R-72 / Nis „O‟ Sing Small ( H.Tube )
Tender For 18 B.12. B.Breakdown Mtce Of Hrsg Phi Charges For Cleaning By Wire Brush And Enamel Painting Of ( 2 Coats ) Hrsg Structures, Foundation Beds, Pipelines, Hand Rails And Other Equipments Upto The Height Of 1.75 Meters ( Enamel Paint / Ac Black Paint Will Be Supplied By Tangedco ) As Per The Direction Of Engineer Incharge. 19 B.13. B.Breakdown Mtce Of Hrsg Phi Overhauling Of Antrieb Actuators Charges For Disassembly Of Control Units, Drives And Limit Switches And Drive Bush, Worm Gear Assembly, Bearings And Oil Seal, Inspection And Complete Cleaning, Replacement Of Worn Out / Damaged Parts, Assembling Of The Above Mentioned Parts, Testing, Limit Checking And Commissioning Of The Actuator As Per The Direction Of Engineer Incharge. 20 B.14. B.Breakdown Mtce Of Hrsg Phi Overhauling Of Auma / Rotork Actuators Charges For Disassembly Of Control Units, Drives And Limit Switches And Drive Bush, Worm Gear Assembly, Bearings And Oil Seal, Inspection And Complete Cleaning, Replacement Of Worn Out / Damaged Parts, Assembling Of The Above Mentioned Parts, Testing, Limit Checking And Commissioning Of The Actuator As Per The Direction Of Engineer Incharge.
Tender For 13 B.7. B.Breakdown Maintenance Of Hrsg Phi Overhauling Of Mov / Hand Operated Valves And Nrvs Upto 250 Mm Size: Charges For Disassembling Actuator If Any, Removal Of Insulation, Disassembling Valve Completely, Overhauling Of Valves Including Inspection, Cleaning Of All Parts, Rectification Of Minor Defects, Lapping Of Valve Seat, Valve Globe / Gate And Blue Matching, Assembling Of Valve, Renewal Of Gland Packing, Assembling Actuator If Any, Providing Insulation, Checking Of Valve Operation And Completing The Work As Per The Direction Of Engineer Incharge. 14 B.8. B.Breakdown Mtce Of Hrsg Phi Thermal Insulation Removal For Single Layer Lagging And Cladding 15 B.9. B.Breakdown Mtce Of Thermal Insulation Reinsulation For Single Layer Lagging And Cladding Hrsg Phi 16 B.10. B.Breakdown Mtce Of Hrsg Phi Hdpe Line Joints Upto 100Mm: Charges For Removing The Damaged Hdpe Pipeline And Renewal Of Pipelines And Fitting Like Stub End, Flange And Bend Etc., And Welding Hdpe Joint By Special Technique Up To 100 Mm Size As Per The Direction Of Engineer Incharge. 17 B.11. B.Breakdown Mtce Of Hrsg Phi Hp / Ip / Lp Phosphate Dozing Tank And Stirrer: Charges For Cleaning Of Phosphate Dozing Tank , Decoupling Of Stirrer And Motor, Cleaning The Shaft And Impeller, Inspection Of Bearings, Replacement Of Worn Out Bearings, Assembling Of The Same, After Completion Of Work, Coupling With Motor And Normalizing As Per The Direction Of Engineer Incharge.
Tender For 10 B.4. B.Breakdown Mtce Of Hrsg Phi Overhauling Of Mov / Hand Operated Valves And Nrvs Upto 50 Mm Size: Charges For Disassembling Actuator If Any, Removal Of Insulation, Disassembling Valve Completely, Overhauling Of Valves Including Inspection, Cleaning Of All Parts, Rectification Of Minor Defects, Lapping Of Valve Seat, Valve Globe / Gate And Blue Matching, Assembling Of Valve, Renewal Of Gland Packing, Assembling Actuator If Any, Providing Insulation, Checking Of Valve Operation And Completing The Work As Per The Direction Of Engineer Incharge. 11 B.5. B.Breakdown Mtce Of Hrsg Phi Overhauling Of Mov / Hand Operated Valves And Nrvs Upto 100 Mm Size: Charges For Disassembling Actuator If Any, Removal Of Insulation, Disassembling Valve Completely, Overhauling Of Valves Including Inspection, Cleaning Of All Parts, Rectification Of Minor Defects, Lapping Of Valve Seat, Valve Globe / Gate And Blue Matching, Assembling Of Valve, Renewal Of Gland Packing, Assembling Actuator If Any, Providing Insulation, Checking Of Valve Operation And Completing The Work As Per The Direction Of Engineer Incharge. 12 B.6. B.Breakdown Mtce Of Hrsg Phi Overhauling Of Mov / Hand Operated Valves And Nrvs Upto 150 Mm Size: Charges For Disassembling Actuator If Any, Removal Of Insulation, Disassembling Valve Completely, Overhauling Of Valves Including Inspection, Cleaning Of All Parts, Rectification Of Minor Defects, Lapping Of Valve Seat, Valve Globe / Gate And Blue Matching, Assembling Of Valve, Renewal Of Gland Packing, Assembling Actuator If Any, Providing Insulation, Checking Of Valve Operation And Completing The Work As Per The Direction Of Engineer Incharge.
Tender For 1 A.1. A.Periodical And Regular Mtce Of Hrsg Phi Charges For Walk Down And Visual Inspection Of Hrsg Phosphate Dosing Pumps, Stirrer And Hrsg Drain Pit Pumps, Carrying Out Minor Rectification Works Like Cleaning, Arresting Of Gland Leaks In Pumps, Renewal Of Gland Packing, If Necessary, Topping Up Of Oil, Adjusting Of Stroke Length, Lubricating Of Bearings Etc. As Per The Direction Of Engineer Incharge. 2 A.2. A.Periodical And Regular Mtce Of Hrsg Phi Charges For Walk Down And Visual Inspection Of Hrsg Hp / Ip / Lp Drum System, Hp / Ip / Lp Vent System, Safety Valves, Hp / Ip / Lp Main Steam System, Connected Pipelines And Valves Etc., Observe For Any Water / Steam Leaks And Rectify The Minor Defects By Tightening Of Gland / Removal Of Gland Packings And Replacing By New One, Lubricating Of Valves, Easying The Valve Operation And Renewal Of Gaskets As Per The Direction Of Engineer Incharge. 3 A.3. A.Periodical And Regular Mtce Of Hrsg Phi Charges For Walk Down And Visual Inspection Of Hrsg Hp / Ip / Lp Feed Control Station, Hp / Ip / Lp Blowdown System, Hp Spray Control Station, Connected Pipelines And Valves Etc., Observe For Any Water / Steam Leaks And Rectify The Minor Defects By Tightening Of Gland / Removal Of Gland Packings And Replacing By New One, Lubricating Of Valves, Easying The Valve Operation And Renewal Of Gaskets, Hrsg Manhole Door Inspection And Attending Minor Leaks As Per The Direction Of Engineer Incharge. 4 A.4. A.Periodical And Regular Mtce Of Hrsg Phi Charges For Walk Down And Visual Inspection Of Hrsg Drain System, Flansh Tanks, Ibd And Cbd Tanks, Connected Pipelines And Valves Etc., Observe For Any Water / Steam Leaks And Rectify The Minor Defects By Tightening Of Gland / Removal Of Gland Packings And Replacing By New One, Lubricating Of Valves, Easying The Valve Operation And Renewal Of Gaskets As Per The Direction Of Engineer Incharge.
Procurement Of Il-76 Spares:-1 Bracket 2 Rod 3 Bolt 4 Slat Door Control - Pylon No. 1 ( Lh ) 5 Section Sealing 6 Rod 7 Ramp Cylinder 8 Cross 9 Drainvalve ( 606110 Type ) 10 Frame No-2 11 Frame No-3 12 Frame No 5 13 Hinge Assembly Rear Cow Pannel ( Rh ) 14 Hinge Assembly Rear Cowl Panels ( Lh ) 15 Ring Sealing 16 Cover - Top Front 17 Hose 18 Nut 19 Bolt 20 Pipeline 21 Rod 22 Clamp 23 Tee-Piece 24 Stop Rh 25 Upper Floor Installation - Fuselage, Section 2 26 Air Brake Section 27 Bellcrank 28 Bolt 29 Door 30 Clamp 31 Panel 32 Pipe Branch 33 Lock Cargo Door Spring 34 Bolt 35 Gasket 36 Gasket 37 Connection 38 Gasket 39 Sealing Ring 40 Limiter - Pressure, Excessive ( V ) 41 Bottle Jack 42 Lock Washer 43 Lock Washer 44 Washer 45 Ring Sealing 46 Washer 47 Crane Cock
24 Visual Inspection For Tightness / Belt Tension, Cleaning Of Air Filters, Lubrication Of Bearing Of Ventilation Units In The Cable Spreader Room And Normalizing As Per The Direction Of Engineer Incharge 25 Breakdown Work In Air Handling Unit Of Mcr Including Dismantling Of External Covers Of Ahu, Removal Of Air Filters, Inspection / Replacement Of Gas Expansion Valve, Visual Inspection For Any Damages In Evaporator Coil, Leak Testing With N2 Gas, Attending Leak If Any By Brazing, Thorough Cleaning Of Evaporator Coil With Air & Water, Refilling Of R22 Gas, Testing And Normalizing As Per The Direction Of Engineer Incharge. ( N2 And R22 Gas Will Be Supplied By Tangedco ) . 26 Breakdown Work In 50Tr Capacity Ac Compressor Condensing Unit ( Acu50a Model, Voltas Make 5H66 & 5H60 ) Including Dismantling Of The Condensor Fan, Visual Inspection For Any External Damages, Through Cleaning Of Fins Of Tubes With Air And Water And Checking The Complete Unit With 1.25 Times Of The Operating Pressure With N2, Attending Any Leak By Brazing, Reassembling Coils, Structure, Fan And Commissioning All Complete As Per The Direction Of Engineer Incharge. 27 Breakdown Work In 15Tr Capacity Semi Hermetic Ac Compressor 28 Breakdown Work In 15Tr Capacity Semi Hermetic Ac Compressor Condensing Unit Including Dismantling Of External Covers Of Condensing Unit, Condenser Fan, Visual Inspection 29 Breakdown Work In 50Tr Capacity Ac Compressor Unit Including Decoupling The Motor By Releasing The Coupling, Dismantling The External Covers Of Compressor Unit, Inspection Of Compressor Internals For Any Damages, Replacement Of Suction / Discharge Reeds, If Necessary, Attending Minor Rectification Works Or Inspection Of Oil Seals, Replacing The Oil Seal If Necessary, Oil Topup, Gas Leak Testing, Refilling Of R22 Gas, Motor To Compressor Alignment Checking, Coupling The Motor & Compressor & Normalizing As Per The Direction Of Engineer
6 Attending Periodical Maintenance Works Of Gas Turbine Ventilation Fans, Blowers And Cooling And Sealing Air Fans: Walk Around Of Turbine Compartment Cooling Air Fan : 4Nos. Turbine Exhaust Frame Air Blower : 2Nos. Gt Lube Oil Skid Cooling Fans : 2Nos. Gt Gas Valve Compartment Cooling Air Fan : 2Nos. Gt Load Compartment Cooling Fan : 2Nos. Dd Seal Air Fans : 2Nos. Gd Seal Air Fans : 2Nos. By Thorough Cleaning Of The Fan Casings And The Dampers, Greasing The Dampers Actuators 7 Gt & Gbc Startup Assistance: Charges For Startup Work In Gas Turbine, Gas Booster Compressor And Its Axillaries, Maintenance Assistance To Attend Water / Oil / Gas Leak And Air Vent Releasing In Lube Oil Line And Checking For Any Abnormalities In The System During The Startup As Per The Direction Of Engineer Incharge 8 Attending Breakdown Maintenance Works Of Seal Air Fans Of Diverter Damper, Guillotine Damper And 88 Tk Fans: Dismantling The Outer Cover And Gasket. Disconnecting The Fan From Motor Shaft And Cleaning Of Fan Housing. Dismantling The Nrv, Inspecting For Any Damage Reassembling The Fan On Motor Shaft And Closing The Cover With New Gasket In Place. Removal Of Bearings Of Nrv Flap, Inspecting Them For Healthiness And Replacing If Necessary. ( Bearings Will Be Supplied By The Tangedco ) Packing Grease And Reassembling The Nrv & Normalizing As Directed By The Engineer Incharge 9 Attending Breakdown Maintenance Works Of Oil Centrifuges: Opening The Collecting Cover, Unscrewing The Lock Rings Using Special Tools, Lifting Off Of Gravity Disc, Disc Stack And Distributor, Lifting Out Bowl Body, Disconnecting Piping Connections Removing The Outlet Parts, Soaking And Cleaning Of All Parts Thoroughly, Removing The Outlet Housing, Separator Bowl, Removing The Pump Assembly, Inspecting The Bushings And Wear Of Seals, .....Etc
3 Attending Periodical Maintenance Works Of The Gas Turbine ( 59.9 Mw ) , Gt Accessories Like Lube Oil Skid, Gas Skid, Mist Eliminator, Exhaust System Of Gas Turbine: Walk Around Visual Inspection Of Gas Turbine For Any Abnormal Sound And Temperature And Visual Inspection Of Gas, Water, Air And Lube Oil Piping System For Leaks, Leaky Gaskets, Pump And Valve Packing Leaks, Vibration Of Piping And General Checks And Attending The Corrective Action Required As Per The Direction Of The Engineer Incharge. In Gt Accessories Module ( Lube Oil Skid And Gas Skid ) Inspecting The Pumps System For Piping Connection For Any Loose Hardware, Accumulator System Pipe Line, Hydraulic Manifolds Leakage Checking And Attending The Leaks 4 Attending Periodical Maintenance Works In The Inlet Air Filter House & Air Processing Unit Of Gt: Walk Around Visual Inspection Of Gt Air Processing Unit ( Apu ) & Inlet Air Filter House Of Gt For Any Abnormal Sound. Checking The Air Processing Unit For Proper Functioning Of The Unit, Draining The Moisture Collected In The Apu, Checking & Attending Minor Air Leak In The Air Filter House, Replacement Of Damaged Air Flexible Hoses For Leak Proof System To Ensure Proper Compression And Attending Any Other Unforeseen Minor Works Related To The Mechanical Maintenance As Directed By The Engineer In Charge 5 Attending Periodical Maintenance Works In Water Wash Skid Of Gas Turbine: Charges For Providing Operation Assistance During Online Water Washing Of Gt, Inspection Of Water Wash Pump & Detergent Pump For Any Abnormal Sound During Operation & Taking Remedial Measures, Topping Up Of Dm Water In The Water Storage Tank, As And When Required By The Operation, To Carryout Online Water Washing Of Gt Compressor And Attending Any Other Unforeseen Minor Works Related To The Mechanical Maintenance As Directed By The Engineer In Charge
tender for Estimate For Repairs &Amp; Replacement Of Damaged Components Of Indian Gate No.2 Including Roller Cages, Roller Assembly, Rubber Seals, Wire Ropes Etc And Fabrication &Amp; Erection New Steel Counter Weights For Spillway Gates &Amp; Electrical Accessories With Fixing Of Electrical Motors To Left Flank Head Regulator Of Kaddam Narayana Reddy Project.
Tender For Work Of Replacement Of Gaskets With Oil Filtration Of 400Kv, 50 Mvar (03 Nos. X 16.67 Mvar), Cgl Make Bus Reactors Without Oil Replacement At 400Kv Asoj S/S Under Jambuva Circle
Copyright © 2019 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
