3136 Hardware And Fasteners tenders are published by various Tendering Authorities & Private companies. 3136 live Tender for Hardware And Fasteners are available in Hardware And Fasteners Tender section You can further filter Hardware And Fasteners tenders by Tender Value, Tender Submission Date or Project Location.
tender for supply of skull clamp with brain retractor for the department of neurosurgery => open tender
tender for repairing of w/s pipe line g.i pipe & ferrule connection along d.h.road (eastern flank) during strengthening of d.h road & adjacent box drain near 15,27,39,57,67/6,90,128/1,133/2,229,25/ 1,485,785,751,738/2,743 etc in ward no-123.
supply of various type anchor for refractory holding application for boiler unit 1, 2 & 3 at wtps.
tender for maintenance of various sports complex. sh:-supply of the cleaning and sanitation material => open tender:-1 r-1, cleaning material of taski or equivalent for glazed tile and other glazed stoneware items ( cane of 05 litre ) 2 r-2, cleaning material of taski or equivalent for floor tile and other glazed stoneware items ( cane of 05 litre ) 3 r-3, glass cleaning material of taski or equivalent ( cane of 05 litre ) 4 r-4, wooden floor cleaning material of taski or equivalent ( cane of 05 litre ) 5 r-5, room freshner of taski or equivalent ( cane of 05 litre ) 6 r-6, wc / wash basin cleaning material of taski or equivalent ( cane of 05 litre ) 7 liquid soap for hand wash of lux, dettol or equivalent ( 05 litre ) 8 phenyl of make gainda, trishul&clenzo or equivalent ( 05 litre ) 9 space spray of finit, baygon spray or equivalent 10 naphthalene ball of trishul or equivalent ( 400 mg ) 11 air sanitizer of godraj , dettol &odonil or equivalent 12 detergent powderofnirma , surf & vim or equivalent 13 tissue paper roll ( 84mtr x 2 ply ) 14 soft broom of standard size and good quality 15 hard seikh broom of standard size and good quality 16 bamboo broom with handle lathi of standard size and good quality 17 floor duster size 30" x 30" of good quality 18 dusting dusters 18 " x18" of good quality 19 floor wiper of heavy quality having 21" blade 20 all out machine with refill or equivalent ( mosquito repellant ) 21 plastic bucket with mug 20 ltr. of good quality 22 small plastic dustbins 6 ltr of good quailty 23 spray gun bottle of approved brand 24 scrubber of scotch brite or equivalent 25 plastic toilet wc cleaning brush of slandered size and good quality 26 plastic dust pan with steel patti of slandered size and good quality
supply of hot air damper shaft & bush for coal mill xrp-803 of
supply of rubber diapharm for esbi make coupling of coal mill xrp-803 of st-ii at wanakbori tps.
supply of gear 2nd red,drg.no:30018-item no-0, output shaft,drg.no:30018/item-005, input pinion,drg:ay/004/30124,rev1, pinion,1st stg size:hr400,drg:av/005/023
supply of materials - bearing,cam follower,cf1-1/2sb, seal,p/n:tsn513l,f/blower, seal,p/n:tsn522s,plumber block,snl522ts, bearing,ball,deep groove,6311-2zc3, bearing unit,round flange,cm-ucfc211n-d1 , bearing,ball,deep groove,1,6310lu, bearing,pillow block,80mm,ci,m-ucp316-d1, bearing,pillow block,c-ucp316-d1, bearing,plain,spherical,sa1200 , bearing,roller,sphe,double,23232b,ntn, bearing,roller,spherical,23232c, bearing,roller,spherical,double,23026b, bearing,ball,deep groove,6206-2z, bearing,flange block,ball,ci,uelfc210, bearing,pillow block,ball,ci,ucp210, bearing,pillow block,set screw,ucp209, bearing,spherical roller ,no:23140 ck, bearing,roller,taper,32310 j2/q, bearing,roller,taper,32312, bearing,spherical roller ,no:22222 ck , bearing,spherical roller ,no:22228 ck, bearing,take-up,50mm,ball,normal uct210, bearing,ball,deep groove,6302-2z, bearing,roller,spherical,2,23040bk, plummer block,bearing,sna-226,ci, bearing 22226 b
supply of materials - ring,p/n:sa500799-1,f/pump,mm300, spacer,p/n:pdcf2555,f/pump,hm250, spacer,p/n:pdcb821,f/pump,hm150 , shaft,p/n:pdch1876,f/slurry pump,hm150, o-ring,p/n:sa953211,f/slurry pump, seal,p/n:z3045338,f/slurry pump,hm150, seal,z3018133;f/pump;300x250f, seal,p/n:z3016399,f/slurry pump,hm150, ring,p/n:z3018098,f/pump,mm300, seal,p/n:z3014480,f/slurry pump,hm150, ring,p/n:sa981243,f/slurry pump,mm300, seal,p/n:z3040891,f/slurry pump,hm150, ring,p/n:sa950545,f/pump,mm300 , seal,pn:z3040889,slurry pump,hm150,metso, spacer,p/n:sa500838-6,f/pump,hm250, spacer,p/n:sa500836-6,slurry pump,hm150, ring,p/n:sa500797-1,f/pump,hm150 fhc-s, sleeve,p/n:pdcf2551,f/slurry pump,mm300, sleeve,p/n:pdcf2539,f/slurry pump,hm150, o-ring,p/n:sa981289,f/slurry pump,mm300, o-ring,p/n:00923201006s,f/pump,hm150, box,p/n:sa500655-1,f/slurry pump , box,p/n:sa500653-1,slurry pump,f/hm150 , spacer,pdch2421;f/pump;300x250f;metso , ring,p/n:sa952900,f/slurry pump, ring,p/n:sa957961,f/slurry pump,hm150 , gasket,p/n:pdca566,f/slurry pump,mm300, gasket,p/n:pdca565,f/slurry pump,hm150, liner,p/n:pd770041,f/slurry pump,mm300, o-ring,p/n:sa981290,f/slurry pump, o-ring,p/n:sa983300,f/slurry pump,hm150, gasket,p/n:pdca568,f/slurry pump,mm300, gasket,p/n:pdca564,f/slurry pump,hm150, o-ring,p/n:sa981291,f/slurry pump, set,p/n:pdwb07-s1,f/slurry pump,hm250, set,p/n:pdwb05-s1,f/slurry pump,hm150
supply of cat b stores=> open tender:-concrete vibrator, cpt with cl circular base, lifting handle engine coupling and housing driven by means of greaves lombardini 1520, 5b hp 3600 rpm air cooled diesel engine manual rope start make- greaves ( consisting of needle vibrator size 50mm / 60mm
supply of items for tata=> open tender:-1.01 assy cyl head complete 278601989907 1.02 gear fly t06560000050 wheel ring teeth 138 t06560000050 1.03 lower eng gasket tata00000131 1.04 r / kit for piston rings std w61550000003 1.05 thermostat tata00000135 1.06 tube fuel supply ( flexible pipe ) t06560000293 1.07 upper eng gasket ` tata00000130 1.08 valve exhaust 278605999968
supply of adjustable mill knife with one spare (hss ) blade of length: 175mm, width: 28mm and thickness: 1.6 to 1.8 mm with venteak wooden handle as per drg.no. dgm/con/mia/02/11 drawing no: dgm/com/mia/02/11
supply of open type heavy duty platform trolley 60 inch x 36 inch platform with 10 swg steel sheet floor with turning device and mounted on 4 nos. heavy duty solid rubber tyre wheel 12 inch x 3 1/2 inch x 1 inch with double ball bearing, load capacity : 1 tonne ,wheel barrow. specification :- size : 30 inch x 21 inch x 12 inch cast double wheeled with robust constrtuction. all welded body with tubular grips capacity for solids 3.0cu.feet size of wheels 12 inch x 2 inch rubber tyred. the body should benot less than 16 gauge sheet. completely enamel painted, along with 2nos. of spare wheels of the above size for each wheel barrow
supply of stores at cod delhi cantt - extractor pulley rivet motor cycle chain=> open tender
tender for rotor shaft manufacturing and replacement of 500 kw 1490 rpm 3 phase 3.3 kv induction motor make drasov czechoslovakia as per annexure enclosed,
supply of d'''''''' shackle galvanised screwed pin type with grade - 30 pin as per is 6132 with tc from a govt. approved lab to the pin dia 12mm safe working load 0.4 ton ,d shackle screwed pin type with eye and coller manufactured out of alloy steel grade 63 swl (approx) 2.5 ton pin 25mm dia as per is: 6132, d'' shackle screwed pin type with eye and collar manufactured out of alloy grade 63 as per is:6132 swl 1.6 ton pin 20mm dia as per 6132 ,d shackle screwed pin type with eye and collar manufactured out of alloy steel grade 63, as per is : 6132/1972, swl 16 tons, pin 50mm dia, d shackle screwed pin type with eye and collar manufactured out of alloy steel grade 63 with swl capacity : 3.2 tons, pin dia 22mm conforming to is : 6132 /1972 ,d# shackle screwed pin type with eye and collar manufactured out of alloy steel grade 63, conform to is : 6132-1972, pin dia 69mm safe working load 32 tonnes.
supply of btr clamp for repair works of 1800mm belt as per drg.no.gm/con/mii/06/15 drawing no: drg.no.gm/con/mii/06/15
supply of cam wheel shaft for bwes 1420-22 main unit , man spr i,ii & iii, bwe man-i&ii, bwes 1355/56/57 and bwes 1440/47/48 drawing no: sme-0786, axle for return wheel of track of man bwe i&ii, mtc i&ii. drawing no: sme-0067 ,cam wheel shaft (modified) for bwe 1420-22 lu, bwe 1571-72 as per drg.sme-2638 drawing no: sme-2638 ,cam wheel shaft (modified) for bwe 1420-22, bwe man-i&ii, man spr as per drg.sme- 2639 drawing no: sme-2639, cam wheel shaft for bwe l&t 4, as per drawing no. sme- 3116. drawing no: sme-3116 ,r.w.axle drg no a9 - 0793 o&k ex lu & 1571 ex. drawing no: ab-0793 ,track return wheel axle dia 240x981mm for mtc 3 -5 and mtc 1541 as per drawing no: 08-0796a drawing no: 08-0796a
supply of stores-100 screw hex hd m16 x 40 - 2 cp - gr 10.9 101 screw hex hd m16x50 -2c.p-gr- 10.9 102 bolt 103 screw hex head 104 stud 105 spring washer 106 spring washer 107 washer 108 spring washer 109 sp.washer 110 spring washer => open tender
supply of stores-1 eng oil guage 2 bolt 3 bolt 4 cable-tacho.hr.meter 5 bolt-cutting edge 6 hour meter 7 tachometer 8 strainer 9 gauge 10 arm rest 11 water temp guage 12 lamp assy 13 strainer 14 hose 15 shim 16 hose 17 hose 18 cap 19 front lamp guard lh 20 cable assy. 21 cover assy 22 hose 23 oil seal 24 ignetion key switch 25 hose [ 210bar pump ] 26 gauge 27 gear coupling 28 smart alarm, backup 29 weight link assy 30 seal kit-hyd.cyl 31 operator seat kit 32 track roller a.sf 33 gear driven 3rd ( n ) 34 qd valve assy rh 35 arm assy [ angle doz 36 pump a. [ steering ] 37 radiator&o.c, ppg [ zigzag core, weld.o.c ] 38 terminal ( + ) 39 terminal 40 ammeter 41 water temp guage 42 floor board 43 element assy 44 case & frame assy 45 dust seal 46 rear lamp guard lh 47 flexible cable 48 disc main clutch 49 plate 50 gear g fwd 3 rd 51 end bit rh 52 end bit 53 st.clutch assy 54 track shoe assy 1 / 2 set 55 m.kit, hyd tank service 56 bd80 lift cylinder assembly 57 front idler assy 58 idler bracket assy 59 carrier roller a [ kt ] 60 transmission assy 61 gear driven 62 gear driven 63 gear farward 5th ( c ) 64 gear driven fwd ( k ) 65 gear driven reverse 66 fork assy 67 gear shift fork assy 68 lever assy fwd 69 gear coupling 70 gear coupling 71 universal joint inst 72 u-joint assy 73 pre filter assy 74 roller bearing 75 roller bearing 76 roller bearing 77 roller bearing 78 hose clip- worm drive id 50mm to 70mm 79 clip- worm drive id 70mm to 90mm 80 cap 81 gasket 82 bolt 83 bolt hex hd. m10x65- 1.5c.p- gr.10.9 84 bolt, hex ( m10x1.5x75mm ) coarse pitch. 85 bolt 86 hx nut m12x11 87 nut hex m8 x 6.8 - 1.25cp - gr-10 88 nut hex m16 x 1.5 89 nut 90 nut 91 rivet 92 screw hex hd m8x20 -1.25c.p-gr- 10.9 93 screw hex hd m8x30 -1.25c.p-gr- 10.9 94 hex screw 95 screw hex hd m10x30 -1.5c.p-gr- 10.9 96 screw hex hd m10x35 -1.5c.p-gr- 10.9 97 screw hex hd m12x25 98 hex.screw 99 screw m12x35 - 10.9g => open tender
supply of materials - ring,locating,14x215mm,ms,frb 14/215, ring,frb12.5/140,f/rcctrolley,snl516, ring,p/n:frb 10/120,f/blower, ring,locating,model:frb 17/290,make:smr, ring,locating,12x180 mm,ms,frb 12/180, bearing,roller,spherical,22228ec3, bearing,roller,spherical,2,22224ek/c3, bearing,roller,spherical,22215 ek c3, bearing,roller,spherical,22222 ek c3, bearing,roller,bs2-2215/c3-2cskvt143, housing,bearing,flanged,fc213, housing,bearing,plumber block,sn516, housing,bearing,sn518,80x160x40mm,ci,skf, plummer block,bearing,sn-524,ci, plummer block,bearing,snh-522, plummerblock,bearing,sna515,65x154x115mm, sleeve,bearing,60mm,65mm,h313,skf, sleeve,bearing,h322,skf, sleeve,brg,110,155,h2324,skf, sleeve,brg,110,155,h3124,skf , fastener,nut,lock km34,193mm,26x32mm,ss, adapter sleeve,h-322, housing,pillow block bearing,snl 515-612, nut,lock,km28,165mm,std,21mm,12mm,c stl, p.b,sn 522+locating ring frb13.5/200, ring,locating,model:frb 10/370,make:smr, ring,locating,model:frb 10/370,make:smr, sleeve,bearing,125x145mm,h3128,skf, sleeve,bearing,180 mm,200 mm,h-3140,skf, ring,locating,320x340x10mm,ms,is2062 , plummer block,p/n:snl 517,sn 517,skf, sleeve,brg,65,98,h215,skf, sleeve,brg,h3144,skf, washer,lock,mb 28,140x180x22,aly.stl, plummer blk,bearing,180x310mm,sd3340g,ci, bearing,pillow block,y,syj 90 tg, plummer block,bearing,split,snl 532,cs, sleeve,bearing,140x210mm,h3132,skf,
tender for fixing of spacer on 400kv mundra-hadala & 400kv varsana - hadala line under 400kv hadala s/s under tr division rajkot
tender for mil-std push pull connectors
spring support assemblies, jp/a927-000-wi-mr-3432/145 spring support assemblies => limited tender
supply of steel fabrication items, general construction material, hardware stores and tools for construction of security fence - angle iron, ms flat=> open tender
procurement of pg clamp, t clamp, bi metallic 220kv isolator clamp (acsr zebra) at substations under manager (t) o&m(e-3)
supply of 9210023070 fastener nut bolts
procurement of pg, t- clamps and isolator clamps at 220kv s/stn. okhla under manager(tech.) o&m west-4.division of delhi transco limited
tender for mil grade power supply pcb with connectors and cables
procurement of axes coupling, tender for axes coupling => limited tender
supply of clamp and conncector in patratu ss => limited tender
procurement of spares for mi-17 v5 helicopters=> limited:-1 screwed in elbow assembly 2 rear support assy ( support assy 777-6140-100 ) 3 gasket assembly 4 strut assembly 5 filter case 6 rod antenna 7 inertial belts 8 suspension 9 turn buckle of dp-m 10 switch ( 3 bm 11 battery pack mi-17 v5 elt 12 cable assembly 13 hydraulic pipe 14 housing with support 15 frame 16 radio altimeter ( a-037 tu1.000. 051-re ) 17 spare parts 18 drive belt 19 dc motor ( es75202-3 ) 20 low voltage dc-dc converter ( geo-nvg1-01 ) 21 communication unit 22 plug in memory module 23 cable 24 emergency locator transmitter 25 hf signal generator 26 antenna sn 3700 27 hydraulic panel
supply of cs stud with two nos. hexagonal nut & two no. 1 / 8''''thick spring washers
supply of spares and consumables and repair of 1010 kva diesel generator set installed at power house of parbati h.e. project ( stage-ii ) ( package no. proc-1790 ) => single:- 1.39 indicator, restriction, product no-3872813 1.40 hose plain, 4104832 1.41 hose plain 4104833 1.42 hose plain, part no-4104835 1.43 clamp bolt 149437 1.44 clamp t-bolt, 135144 1.45 clamp 43828 e 1.46 hose flexible, part no-ak5090ss 1.47 hose flexible ak 5033 ss 1.48 hose.hump, part no-30768 1.49 clamp, bolt 125741 1.50 clamp, bolt 125742 1.51 hose elbow 3030778 1.52 clamp, bolt 3627206 1.53 clamp, bolt 3175623 1.54 hose plain , 60985 1.55 hose, plain sc 3630125 ( 3067370 ) 1.56 hose, plain ( 3067371 ) 1.57 clamp, t bolt ( 3633975 ) 1.58 clamp, t bolt, part no. 3633974 1.59 element, lub oil, part no. kit3238204 1.60 kit, fuel filter and ring part code-kit3238493 1.61 kit, super bypass filter element, part no. kit3879488 1.62 seal o- ring-3010937 1.63 inhibitor corrosion- make-cummins part no.3167218 10 ltrs 1.64 strip test part no. 4912590 1.65 kit air cleaner element- make-cummins part no.kit3238665 1.66 premium blue cl4plus ( 210 ltrs ) 504626
supply of spares and consumables and repair of 1010 kva dg set installed at power house of parbati h.e. project ( stage-ii ) ( package no. proc-1790 ) => single:-1.01 liner cylinder, 3006089 1.02 kit piston & rings, kit3238277 1.03 bearing, connecting rod, 3047390 1.04 kit.upper engine gasket, part no- 4352580 1.05 valve piston cooling, part no- 3879479 1.06 gasket hand hole cover 3175856 1.07 valve exhaust, part no- 3088389 1.08 valve intake, part no- 3052820 1.09 insert valve 3086193 1.10 insert, valve part no.3086192 1.11 guide valve stem, part no- 3202210 1.12 valve callat 205091 1.13 kit barrel plunger & cup, part no- kit3238196 1.14 valve check 167157 1.15 gasket injector 0173086 1.16 retrainer, screen, 174299 1.17 screen filter 3054999 1.18 plug injector orifice, part no-3045047 1.19 seal o ring - 193736 1.20 seal injector 207244 1.21 pin sprit 203426 1.22 kit stc tappet repair, part no-3804700 1.23 gasket turbocharger, part no-3171368 1.24 kit, turbo repair hc5a, 3545647 1.25 gasket, connection 3630742 1.26 screw hex flange head cap, part no-3176570 1.27 nut, lock part no. 3016182 1.28 spider jaw 3046200 1.29 gasket fuel pump, part no- 4026172 1.30 gasket, acc drive support part no. 3046852 1.31 gasket, water pump, 206193 1.32 gasket, water pump, 206455 1.33 seal, o ring 3007512 1.34 seal o ring 206457 1.35 gasket, support, 206416 1.36 gasket, wtr trf connection, 3179035 1.37 gasket connection, part no-206460 1.38 gasket kir-dg-xx-207515
supply of 8 types of hardwares
tender for m / s pic , usa make oldham coupling part no.; t2-10
supply of hand wheel
tender for ss fitting work
supply of spares for komatsu ripper dozers.=> single:-1 hose, pt.no. 198-03-71321 2 hose, pt.no. 198-03-71331 3 clamp. pt. no. 07289-00070 4 hose water pump 198-03-71210 5 clamp 07289-00105 6 o ptno 0700062090 ring 7 o ring p.no.07000-72110 8 hose, pt.no. 198-03-51451 9 gasket part no. 198-03-55411 10 hose water manifold 07260-24736 11 clamp, pt.no. 07289-00055 12 hose, pt.no. 07260-24720 13 hose p.no.198-03-73420 14 gasket transmission cooler, 198-03- 73130 15 o ring ptno p.no:07000-73035 16 hose precleaner 6215-11-6960 17 clamp, pt.no. 07289-00170 18 hose 6240-11-7890 19 hose air cleaner 6215-11-4690 20 clamp, pt.no. 6215-11-4680 21 hose p.no.09483-40314 22 gasket, 07332-51400 23 gasket, 07332-53400 24 hose, pt.no. 262-809-2650 25 receiver tank, pt.no. 20y-979-3120 26 hose, pt.no. 198-03-71440 27 hose, pt.no. 198-03-71270 28 hose hyd blade lift cylinder 07099-01217 29 hose, pt.no. 02765-00607 30 o ring, 207-62-64740 31 o ring 07002-13334 32 hose, pt.no. 198-04-61151 33 fuel system hose kit, part no. z30941163 34 hose hydraulic pin puller, 198-79- 52210 35 hose, pt.no. 07097-01012 36 hose, pt.no. 198-61-61821 37 hose, pt.no. 198-61-61811 38 hose ripper delivery 198-61-61610 39 nut alternator, p.no.01580-11411 40 nut ac compressor, p.no.01580- 11613 41 bolt, p.no.01010-83060 42 bolt, pt. no. 01011-81600 43 bolt, pt. no. 198-54-41790 44 hose hyd pump delivery, 02765- 005a7 45 screw, p.no.01245-00616 46 screw- 01023-20616 47 screw- 01240-00820 48 screw, p.no.01245-00620 49 washer, p.no.01643-70623 50 handle assy. 198-z11-3710 51 gasket upper tank p.no.198-03-71160 52 washer, 01643-33080 53 nut, pt. no. 01590-02022 54 bolt, pt. no. 01010-81635 55 buttom-23d 9504450
supply of fasteners for petrofac columns
tender for lock nutitem list :- (1) lock nut- ?"x13tpi, unc-2b, drg. no. kgp/dl/nt 62, alt-2.
tender for springitem list :- (1) spring (aux f.p. x hd. outer) matl,specn.cr.v.stl. 31pd5606 drg.no 46d76092 alt d
tender for screw jack mounted on traverser, capacititem list :- (1) screw jack mounted on traverser, capacity 20 mt, body and traversor to be manufactured close grained, graded malleable casting, confirming to is: 14329-1995. screw to be manufactured from carbon steel confirming to is: 1875 with acme thread duly hardened. jacks to be provided with necessary handles and operating rods. specification: (1) capacity: 20 mt (2) minimum height: 660 mm (3) maximum height: 1070 mm (4) lift: 400 mm (5) screw dia: 74 mm (6) head dia: 87 mm
tender for bracket (r.h.) for lower spring beam to icf drg. no. t - 0 - 5 - 666, alt. 'd', col. i, item no. 1 &item list :- (1) bracket (r.h.) for lower spring beam to icf drg. no. t - 0 - 5 - 666, alt. 'd', col. i, item no. 1 & 2 in assembled condition and assembly drg. no. t - 0 - 5 - 667, alt. k, item no. 5. matl. & specn. - as per drg. dycmm / uttar pradesh 183.00 numbers
tender for screw bearing capitem list :- (1) screw bearing cap as per drg. no. wdm2/sc-18/h alt.2.
tender for lock nut for slack adjuster, wd-82064-s-08-rc, item -2. alt. no. 9.item list :- (1) lock nut for slack adjuster, wd-82064-s-08-rc, item -2. alt. no. 9.
tender for bracket completeitem list :- (1) bracket completeas per 3 10113.0.09.095.014 alt 'nil'
tender for nut & bolt.item list :- (1) nut, bolt and washer kit, 01 set consisting of 06 (six) items. make: tvs or unbrako, detail description and specification attach
tender for hex head bolt 24x105item list :- (1) hex head bolt 24x105 grade 8.8 hardness .is-1364/part-1/2002 make-as per clw approved vender list for standard hardware
tender for s.s hex head screw m10x16item list :- (1) s.s hex head screw m10x16 is:1363(part-2)2002 is:1367(part-14)latest,gr.a2-70.
tender for hex head cap screw size 1"-8tpi x3" item list :- (1) hex head cap screw size 1"-8tpi x3" length to dlw part no.15020216 sl.no.80 & dlw drg.no.tpe-13-0044 alt-u. amm/dsl/gonda uttar pradesh 540.00 numbers
tender for insulated bolt assembly item list :- (1) insulated bolt assembly for ep contactor as per dlw drg no; el/pt/0622 alt-r2 and dlw part no12536222 as per rdso instruction bulletin no;mp.ib. ec. 01.07.10(rev.00)dt.25.02.2010.
tender for spring brake chamber item list :- (1) spring brake chamber complete to m/s ftil part no 799 5002 80 along with parking brake lever assembly to ftil part no 546 1010 00.[ one number each.]
tender for woama make spring item list :- (1) woama make spring loaded toggle switch for compressor (blcp) as per m/s. woama type no: wm-f/tuso/21/22/r-20 and which confirm to clw specn. no: clw/es/3/0075/a. make: schaltbau aktiengesellschaft, germany (or) woama electronics only. note: 1) this item is reserved for supply by clw approved suppliers only (as per clw master list no: clw/mlas/3-phase, version 20.00,
tender for belleville spring washer item list :- (1) belleville spring washer dia 8.4/18 to m/s adtranz's pt.no. a4125, drg.no. mt- 430190 p118, spare for control lever of air motor of tap changer type no. 32.
tender for set of polyurethane spring padsitem list :- (1) set of polyurethane spring pads for secondary springs of three phase loco.one set consists of two items,32 nos.(1) polyurethane spring pads for secondary spring of three phase loco as per ref-1. (2) polyurethane spring pads for secondary spring of three phase loco ref-2 as per els/lgd drg no.c/els/lgd/bogie/3/140 alt-1. sr. section engineer(trs) maharashtra 30.00 set
tender for ss hex hd screw size:m12 x 70item list :- (1) ss hex hd screw size:m12 x 70 to specn. is:1364(p2)2002 and mat. to is:1367 (p14) 1984, gr a2 70.
tender for installation tools of 7/8" hand held unititem list :- (1) set of spares for repairing of installation tool with hand held unit of 7/8" lock bolt machine, make : stanley or equivalent, one set consisting of 10 items as per given below :- (1) contractor, avlock part no. c050 or equivalent, qty/set = 03 nos. (2) overload relay, avlock part no. c265 or equivalent, qty/set = 03 nos. (3) directional valve, avlock part no. c314 or equivalent, qty/set = 06 nos. (4) surge protective device, avlock part no. c366 or equivalent, qty/set = 02 nos. (5) quick coupling set, avlock part no. hs01 or equivalent, qty/set = 05 nos. (6) bulk head adopter, avlock part no. c028 or equivalent, qty/set = 02 nos. (7) bridge rectifier, avlock part no. c097 or equivalent, qty/set = 02 nos. (8) grub screw, avlock part no. gs20 or equivalent, qty/set = 10 nos. (9) relief valve, avlock part no. c231 or equivalent, qty/set = 02 nos. (10) collet, avlock part no. n532 or equivalent, qty/set = 06 nos.
tender for m20 hex head bolt with mut x 75 longitem list :- (1) m 20 hex head bolt with nut x 75 long for spring loaded side bearer assly of blc wagon drawing no. contr-9404-s-15 alt-12 item no.8.
tender for hex head screwitem list :- (1) hex head screw is:1364 (part 2)2002 m16 x 100-10.9 and is:1367 (part-3)2002 and zinc electroplated to grade a3l of annex-e of is:1367(part eleven) 2002.the item shall be of make tvs or unbrako or lps only.
tender for foot switch spring load for sandingitem list :- (1) foot switch spring load for sanding, vigilance and release of indep. brake(pos no. 192.1.235.262) as per clw specn no. clw/es/3/0032 alt d or latest, clw drg. no.-clw/es/3/sk-1/32/d and clw/es/3/sk- 1/32/d or latest (abb product no.- 3ehp585810r000. smm-d(els) itarsi madhya pradesh 145.00 numbers
tender for hex head bolt 4" long x 1" dia toitem list :- (1) hex head bolt 4" long x 1" dia to dlw drg no. 2p-11369-128 and dlw part no. 15040252
tender for 140 kn air spring for lhb gs coach to rditem list :- (1) 140 kn air spring for lhb gs coach to rdso specification c-k509 rev. 02 amendment-4 of oct.-2016 with top plate diameter as 700 mm, bottom mounting base plate shall be as per rdso drawing no. cg-k15081 and installation height to be maintained as 294 mm suitably adjusted by increasing the thickness of base plate by additional 39 mm. one set consisting of 04 nos. air spring for one coach. this item is restricted for procurment from rdso approved sources only.
tender for ss.hex hd.screw size m8x30item list :- (1) ss.hex hd.screw size m8x30, to specn is:1364(p-2)2002 mat to is:1367-(p-14) -1984, gr.a2-70.
tender for bracket for locking bolt for flap door of boxn wagon .item list :- (1) bracket for locking bolt for flap door of boxn wagon to rdso drg no. wd-90007-s-1 alt 14 or latest, item 15 (50% of qty of brackets with 12mm slot as shown in drg.) , to is:2062/2011 e 250 a
tender for t-head bolt & nutsitem list :- (1) m.s. t-head bolt & nut (for 52kg running rail) to rdso,s drg. no. t-5160.
tender for supply, installation, commissioning & testing of pneumatic piping arrgt. for 4-point suspn. air item list :- (1) supply, installation, commissioning & testing of pneumatic piping arrgt. for 4-point suspn. air spring bogie (with ss piping & double ferrule fittings) as per dmu/dpc7-0-5-702 col.i alt.'g'
tender for bolt ms hex head 12 x 50 with nut, spec. bis/steel, is-1363, pt-i. hsn code- 7318.item list :- (1) bolt ms hex head 12 x 50 with nut, spec. bis/steel, is-1363, pt-i. hsn code- 7318.
tender for supply, transportation and installation of led tv along with wall mounting bracket & guarantee/warraitem list :- (1) supply, transportation and installation of led tv along with wall mounting bracket & guarantee/warranty as per prevaled supply trat bls station under sse/tele/bls terms & condition site having following features (i) full hd (ii) built in wi fi (iii) 3g/lte plug and play facility (iv) ethernet port. (v) hdmi and usb port. (vi) web browser, smart led tv size 32". make samsung va32m4300 or lg or sony. as per gem warranty on site 3 years.
tender for bracket with bossitem list :- (1) bracket with boss to drg. no. wtac 3-0-3-310 col.i item 1 & 2 col ii, item 1 & 2 (ac coach alternator bracket).
tender for sliding screw size: m10x30item list :- (1) sliding screw size: m10x30 to drg no.mi004525, alt-a, item-1.
tender for peeled and centreless ground spring steel rounds dia 42 +0.05mm/-0.05mm x length 3370 mm +10mm/-0mmitem list :- (1) peeled and centreless ground spring steel rounds dia 42 +0.05mm/-0.05mm x length 3370 mm +10mm/-0mm to specn.is:3195-92 with amendment nos.1 and 2 gr.52cr4mo2v and conforming to icf/md/specn.155 issue status-01 rev-01 with amendment no.1 and 2.- -----
tender for hex hd bolt m 20 x 130item list :- (1) hex hd bolt m 20 x 130 - 10.9 to is 1364 (part-1)2002 / iso 4016, zinc electroplated to grade a3l of annexure-e of is: 1367 (part-eleven) 2002. make shall be of tvs or unbrako or lps only. the item shall be of make tvs or unbrako or lps only offers from oem or their authorised dealers only shall be considered. if the tenderer is a dealer, authorised dealership certificate shall be attached along with offer, failing which the offer is liable to be rejected.
tender for axle cap fixing screw.item list :- (1) axle cap fixing screw for traction motor of ngef as per drawing no. mr/poh-7-5-0173. acceptable brands tvs, lps and unbrako only.
tender for collar (dia 84 x 30 mm) for screw couplingitem list :- (1) collar (dia 84 x 30 mm) for screw coupling to rdso sk 99002, alt.5. item 9.
tender for a set of nuts for cam shaft consisting three types (1) emd pt.no.8032717 alt-ea (2) emd pt.no.94165item list :- (1) a set of nuts for cam shaft consisting three types (1) emd pt.no.8032717 alt-ea (2) emd pt.no.9416514 (3) emd pt no.9335109 . diesel stores depot rajasthan 100.00 set
tender for tail lamp with charger: (1) size 80x80x85 mm with holding bracket. (2) holding bracket size 60x17 m.item list :- (1) tail lamp with charger: (1) size 80x80x85 mm with holding bracket. (2) holding bracket size 60x17 m. (3) weight 450 gms. (4) battery : rechargeable 4 v/1000 mh (5) backup: above 30 hours. (6) functions : rotary selected switch. sample may be may be got approved before bulk supply accepted. sr. divnl. operating gujarat 210.00 numbers
tender for damper bracket as per drg.no. skvl-467item list :- (1) damper bracket as per drg.no. skvl-467 item no.12 alt 4 or latest.material:- is 2062 e 350 quality 'c' or sailma 350 hi
tender for bolt drilled hex item list :- (1) bolt drilled hex head 24 tpi x 5/8" long emd pat no 8286669
tender for plain washer/9item list :- (1) plain washer/9(stainless steel) is:2016-latest-a, aisi 304.
tender for ss.hex head screw size m6x35 item list :- (1) ss.hex head screw size m6x35 to specn.is:1364(p-2)2002 & mat to is:1367-(p-14) 1984,gr.a2-70
tender for ht boltitem list :- (1) high tensile socket headed bolt of grade bs:2470 and of size 3/8" dia x 16 tpi x 1 3/4" length of tvs, lps, pooja, unbrako, pfl makes only. note: valid authorised dealership certificate should accompany with offers.
tender for prevailing torque type all metal hex nut m10 as per din6925/din980v- with property class-10 to is:13item list :- (1) prevailing torque type all metal hex nut m10 as per din6925/din980v- with property class-10 to is:1367 (part-6)-1991-a3b, prevailing torque type all metal hex nut.
tender for nickel plated brass pg thread plug screwitem list :- (1) nickel plated brass pg thread plug screw pg-16 table- a18, sl.no.4 to rdso/pe/spec/ac/0138-2009,rev.1(annexure a).
tender for hex head cap screw ( non size 3/8"x1" lengthx16tpi x full thread ) dlw pt.no.15031093 dlw drg.no.tpeitem list :- (1) hex head cap screw ( non size 3/8"x1" lengthx16tpi x full thread ) dlw pt.no.15031093 dlw drg.no.tpe13-0044 sl.no.19 alt.'u'. workshop diesel loco west bengal 4950.00 numbers
tender for s.s hex head screw m12x30item list :- (1) s.s hex head screw m12x30 is:1363(part-2)latest is:1367(part-14)latest, a2-70.
tender for tensator springitem list :- (1) tensator spring with tube for window glass lower shutter wap-4/wag-7 drg no. 436/mach pt. no. 87. it is used window of wag-7/wap-4 loco.
tender for lamp 50 wattsitem list :- (1) lamp 50 watts 75 volts { dc} [screw type ] dlw drawing no . del - 2/64 alt [r7], nr alt [1].
tender for pipe bracket with control reservoiritem list :- (1) common pipe bracket with control reservoir complete to rdso drg.no. wd9-7951-s-10, alt.3. material and specification : rdso specn. no. 02 abr/02, amend. 4 of sep,2016 carriage workshop west bengal 62.00 numbers
tender for high strength structural steel bolt item list :- (1) high strength structural steel bolt of size m16x65mm long with drilled hole of 4mm dia at 10mm from the tail end of the bolt to is 3757 class 10.9 with castle nut m16 to is 2232 p-105 and split pin of size 4mm diax28mm long to is 549.make:-lps, dfl, pfl, tvs, bolt master, unb only.
tender for set of galvanized hex.head screw m16 x 50 consisting of 5 items (item-6: galvanised hex.hd.screw m16item list :- (1) set of galvanized hex.head screw m16 x 50 consisting of 5 items (item-6: galvanised hex.hd.screw m16x50 with 4 mm hole for split pin,5 mm from bottom qty:01 no., item-7: galvanised hex.nut m16,qty:01 no., item-8: galvanised hex.thin nut m16,qty:01 no.,item-9: galvanising spring washer m16,qty:01 no.,item-10: galvanising split pin 3.2x40,qty:01 no.) to icf drg.no.wgscwac7 9-0-705 alt-b. mechanical & telangana 25000.00 numbers
tender for s.s hex nut m10 item list :- (1) s.s hex nut m10 to is:1363 (p3)latest is:1367(p14)latest, a2-70.
tender for spring for vcb typeitem list :- (1) spring for vcb type 20 m/s. areva drg. no. lsc 80. code 5120060.
tender for secondary spring generator car side 2. etcitem list :- (1) secondary spring generator car side 2 [outer]. drawing no.- fiat-sig schienen fahrzeuge ag's no.- 1268836 ,ver.01. material and specification - specification no.17.248 100 05 amendment no.1. & t.s. 17.471 101 01 amendment no.2. colour code - as per design's letter no.md 23151 23.11.2002 and final coat shade ral7012. carriage workshop west bengal 6.00 numbers
tender for camber jackitem list :- (1) camber jack mechanical screw type heavy duty 60 ton capacity. (2) camber jack mechanical screw type heavy duty 50 ton capacity.
tender for axle cap bolt m 36 x 110 mm x 78mm(l)with spring washer to clw's drg. no. 4 twd.095.089, alt-3, mechitem list :- (1) axle cap bolt m 36 x 110 mm x 78mm(l)with spring washer to clw's drg. no. 4 twd.095.089, alt-3, mechanical property/material specn to is-1367, pt -3/91 and is-1364 , pt-1/92, property class - 10.9 and is-3063 type-b for spring washer for wag5ha, wag 7 & wap4 locos. make - lps, sundaram fasteners ltd., gkw limited., bolt master india pvt ltd., deepak fastners ltd. diesel loco shed west bengal 258.00 set
tender for m s shim washer.item list :- (1) ms shim washer for suspension and compensating beam for wdg3a locomotives. size- thickness: 2mm, id: 75mm, od:124mm. details size and measurement as per local drawing of sse/ut/ngc's drg. no. sse/ut/sh-02-18/02 attached.
tender for procurement of door check spring.item list :- (1) door check spring as per irs drg no w/dw-305d,alt-6 or latest: material & specification as per drg
tender for secondary spring inner for fiat type gs bogies to rcf drg. no. lg05100 alt-a. matl. & spec. as per ditem list :- (1) secondary spring inner for fiat type gs bogies to rcf drg. no. lg05100 alt-a. matl. & spec. as per drg. general stores depot uttar pradesh 144.00 numbers
Copyright © 2019 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
