Railway Machinery Tenders from India

supply of , bogie bolster spring outer for mg bkh wagon to drawing no: w/be-816, alt-8 or latest and to specification is:3195, gr 60 si7 & wd-01-hls-94(rev-3) with latest amendments., bogie bolster spring inner for mg bkh wagon to drawing no: w/be-761, alt-4 or latest and to specification is:3195, gr 60 si7 & wd-01-hls-94(rev-3) with latest amendments.

supply of , silent block for slotted design anchor link to drg.no. rdso/sk 94101 type- a, alt-2 and rdso str c-9406 rev.ii with amendment no.1 & 2.

supply of , flexible wiper blade assly (stainless) 508 lg as per clw drg. no. 1209.07.303-022 with latest alteration.

supply of , prodective tube complete for axle box guide arrangement to icf drg no: emu/m-0-1-011 alt-g/2.

supply of , standard wooden wedge as per rdso drg. no. sk dl-4575. specn:

supply of fpga based – rcp controller on sitc basis

supply of , coil pressure spring for non modified shock absorber to escorts drg. no. 2130001.

supply of , qrv kit for keo type dv containing 15 items as per list attached.

supply of , bell crank for centre brake rigging, complete with pin, washer & split pin to irs drg no. w/bg-6184 alt.5 or latest.

supply of , shoulder pin assly. to m/s. sil ord. ref. s000242 for pantograph type am-12. each unit should be emboss/engraved with makers name, month, year & batch no. of manufacturing at a conspicuous place.

supply of , key for garden denver compressor as per emd part no.8447774.

supply of , slide, box of 50 x 10 pack. rate must be quoted per pack of 50 slides each. 1. should be ultra thin 2. the edge of the slide should be moulded. 3. it must be 3" x 1" in size. 4. isi/fda/ce 0434 as applicable. 5. demonstration should be done to the satisfaction of the user department.

procurement of mt items through local purchase .- lv7 / re 580580 bulb 12v 35-35w , lv7 / re 111888 oil seal adapter assy , lv7 / re 112054 piston ring set ( 0 . 040 o / s ) , lv7 / re 112240 regulator cum rectifire set 12v , lv7 / re 140484 tool bag , lv7 / re 141116 rear brake cover plate complete , lv7 / re 145157 sleeve kick start lever , lv7 / re 145412 bracket clutch lever ( 143332 ) , lv7 / re 2520-000717 plain plate ( 140350 ) , lv7 / re 2520-000712 clutch pla...

procurement of mt stores , mt store , door glass lh , assy blade wiper , windshield assy flat , element air cleaner , cyl assy hyd brake master , sliding glass , extractor pulley rivet motor cycle chain

procurement of mt spares.- joint assy universal , spindle wheel bearing , head lamp assy , arm wind screen wiper s / a of wiper arm , assy arm wiper , oil filter ( fuel flow with filter element ) , belt timing ( mpfi ) , lamp assy front fog , lever tyre car or truck , hose nonmetallic

supply of , internal circlip for non modified shock absorber to escorts drg. no. 2290001.

supply of , rubber kit for c3w distributor valve consisting of 40 items to ftrtil kit part no-790501106 as per attached enclosure.

supply of , set of rubber 'o' ring suitable for rotex magnet valve type nw-10 valve comprising 08 items, 17 nos. as per drg no. wcr/tkd/el/4-sk.018. ref. 1 to 8.( this is shelf life items and should be procured with staggered delivery period. supplier to mention /print date of manufacturing on the item & item to be supplied within 60 days of manufacture date. )

supply of , current transducer for bg11, bg21 to medha pt. no. sp696121003 or similar.

supply of , set of 12 types of fasteners as enclosure annexure.

supply of , tacrolimus ointment in 10/20 gm tube. per unit.(the mandatory form enclosed herewith should be filled & attached by the participating firm)."please quote only if the prouct is available in the uploaded product list of railway board".

supply of , cover to dlw part no. 11369280 to suit hand brake with handle chain to dlw part no. 11360290.

supply of , welding shield protective glass filter for electric arc welding size : 108 mm x 82 mm x 3 mm thk.colour- dark green, shade no.11 to is : 5983-1980 , amd. 1

supply of , slotted pan head self tapping sheet metal screw with cd/ni/cr plated size 10x19 mm long to is:7173/2018 rev-2, type-c, thread to is:5957/2003 rev-2 and material to is:7178/2018 rev.-4

supply of , capsule containing lycopene 6% 200 mcg ,vitamin a 2500 iu,vit. c 50 mg,vit e 10 iu ,seleninm,zinc(lycoway/ equ.)

supply of , shock absorber retainer washer inner to gabriel part no. s-950110-pt.

supply of , set consisting 07 types of elbow. 1) 1/2 inch ms elbow union= 01 no. 2) 3/4 inch ms elbow union= 01 nos. 3) 1-1/2 inch ms elbow union= 01 nos. 4) 1 inch ms elbow union= 01 no. 5) 2 inch ms elbow union= 01 no. 6) 1/2 inch ms elbow= 01 no. 7) 1 inch ms tee= 01 no. specification: is 2062.

supply of , dust shield / bg-icf for axle box guide arrangement, as per drg.no. drawing no: t-0-1-619 alt- l/13, as per specn. material specification: as per drg.

supply of , oil pump assembly for m/s elgi make trc 1000 dcm main compressor to elgi part no. a070030.

supply of , calibration gas mixture for dga with needle valve for drawing the gas. gas quantity: 10ltrs. at pressure 20kg/sq. cm in aluminium can of 500ml with content methane: 1000 ppm, acetylene: 1000 ppm, hydrogen: 1000ppm, carbon dioxide: 5000ppm, carbon monoxide: 5000ppm, balance nitrogen. make: spancan, chemix. firm should submit the gas calibration certificate.

supply of , set of 2 types of gaskets for mph (converter and transformer oil pump) to clw pl no.29258078.

supply of , crp test kit 100 test

supply of , set of tools consisting of following items in a quality bag or box 1.combination pliers with joint cutter(taparia product code: 1621-8),size:210mm-01 no. 2.wire stripper(taparia product code:ws 06) size:150mm-01 no.3.double ended spanner, high grade steel,forged and accurately machined.chrome platted, genearlly confirms to is:2028-2004 size: 12x13 mm-01 no,4..double ended spanner, high grade steel,forged and accurately machined,chrome platted, genearlly confirms to is:2028-2004 size...

supply of , 40 watts recess mounted luminaire,2x2 feet to be operated in 230 volts single phase 50 hz , conforming to indian standard is10322 ,voltage withstand capacity 140-280v ,140lm/w,having color rendering index >80,color temperature :6000k,light effect:cool white ,ip20,slim type,suitable to fit in pop false ceiling, warranty 3 years preferrable make havells philips,hpl,surya,eveready,syska,ge,moserbaer,crompton,luker,wipro,bajaj ,osram. note: firm should invariably upload the dealership c...

supply of , polyamide bush size-32x75x65 mm for wag-7 loco, as per rdso drg.no.- skel-4725 ref. 03.

supply of , iron wheel skid to rdso specification and drg. no. tfc/spec. 374.

supply of , ra factor kit 25 test

supply of , worm drive hose clamps to is:4762/2002, amndt. no. 4, for hose external dia 65 mm. with zinc coating on iron & steel to is:1573/1986., worm drive hose clamps to is:4762/2002, amndt. no. 4, for hose external dia 45 mm. with zinc coating on iron & steel to is:1573/1986., worm drive hose clamps to is:4762/2002, amndt. no. 4, for hose external dia 30 mm. with zinc coating on iron & steel to is:1573/1986.

supply of , set of maintenance kit for cable head termination system (cht) of loco and emu/memu coaches, consisting of 03 items, details as:- (1) tape self bonding length 9 mtrs/roll, width 38/50 mm. technical specification : tape shall be okoprene neoprene rubber or its equivalent. operating temperature not less than 130 degree c. the dielectric strength shall not be less than 5kv/mm. the elongation during stretching shall not be less than 40%. the tape shall be suitable for outdoor use and sh...

supply of , foam gasket for loco cab door, size : long 2mt ,breadth 1mt, thickness 10mm.

supply of , polyamide self lubricating bush for compensating beam size- 40x85x70 mm for wag-7 loco,as per rdso/2007/el/spen/0056/rev. 0, jan-08 and drg. no.- skel-4725ref.-4.

supply of , blow pipe cutter ( cutting torch) fitted with pnm (for bmcg/lpg) cutting nozzle size-1/16 inch two piece three seat confirmed to is: 7653/75 for cuttong capacity of ms plate 6 mm to 40 mm with need for nozzle of different size model no.303

supply of , discharge valve assembly for elgi make trc 1000 dcm with part no. a070019.

supply of , cover, for brake head drawing no.: t - 3 - 1 - 608, alt. ( h ) & ( 12 )

supply of , dust shield spring 4x3035mm approx. for axle box guide arrangement as per drg. no. icf drg no.-t-0-1-607, alt-j/15, as per spec.: material specification is:4454-2001, part 1,gr-dm.

supply of , 2x2 feet recess mounted luminarie,to be operated in single phase 230v ,50 hz ac supply,suitable to fix in false ceiling,slim type ,having color temperature 4000k,polycorbanate body,conformity to indian standard is:10322/part 5/sec-2/2012 and is 16107 (part 2/sec 1) : 2012 for recess type ,ip 20,neutral white, warranty 5 years ,preferable make: syska,hpl,wipro,havells,crompton,bajaj,luker,eveready,moserbaer,osram,philips,ge,surya note: firm should invariably upload the dealership cer...

supply of , 3 kw heater coil of rated voltage 220-230v single phase ac, suitable to use in horizontal type water boiler/geyser of lhb type pantry. make : heatron , escorts, dasspass, girish or similar. the make mentioned in the demand are independent and equivalent.

supply of , pantograph am12 complete with 1 no. servomotor assly, 1 no . mechanism assly, 1 no. throttle valve assly as per firms drg.no. 22110201a figure no. 1e with metallised carbon strip but foot insulators for operation on ac electrical multiple unit ( ac emu ) with 25kv, 50hz, ac supply. the metallised carbon strip will be as per rdso drg.no skel 4303 ( rev.4 ) .

procurement of mt spares.- s / a support water filter , assy high pressure hose , bearing input shaft , lever assy rh , shaft seal , changeover switch , scotch lorry drg cim ( b ) 897 , solenoid switch , tank coolant vehicular

supply of , 54" colling fan assembly to rdso spec no mp.0.24.00.55 (rev 01) oct 09. or latest

supply of , door hand hold for flap door for boxn wagon as per irs drg. no. w/ml-6,alt. 3, material and specification as per drawing.

supply of , door closer kit for double acting fire worthy door as per icf drawing no.sk3-5-6-014, alt.f, item no.5, door closer of make m/s.dorma its-96 or equivalent note : sample to be approved by consignee before bulk supply".

supply of , set of rubber items for mounting triplate panel of sil make.set consisting of 39 items. 99 nos.as per annexure.

supply of , guide ring, ( acetal homopolymer ) for axle box guide arrangement drawing no. t-0-1-640, alt. ( b ) & ( 2 ) specification: c-8215 ( rev.-2 ) amndt.-1

supply of , top housing for contact side bearer pad for casnub hs bogies.(material to be procured from rdso approved sources only) to drg.no.aal-021101,alt 8,item.no.1 with pu lining of item .no.4.

supply of , set of adjusters 13t & 16t bogie consisting of 02 items are as [1] adjuster 22mm to icf,s drg. no. t-3-607,alt.no. p/12, qty/kit=14 nos & [2] adjuster 32mm to icf,s drg.no t-3-1-807,alt. no.a, qty/kit=02nos

supply of , pipe 20 bore as per rdso drg. no. wd-80007-s-11, item no. 5, alt. 9. specn. no.04-abr-2002 with 8 amendments [last amendment no. 8 issued in sept. 2016].

rajkot division - increasing clear standing room (csr) of loose line no. 3 in goods shed at hapa.

supply, installation of track based rail lubricators (hydraulic type) in sr.den/n/sbc section. including execution for two years after free operation of one year. maintenance period 24 months

name of work:- replacement of channel sleepers for tbtr work by h-beam sleepers on track falling on bridges in rtm division (24 nos bridges) in connection with raising of speed to 160 kmph/200kmph on existing new delhi-mumbai route (including godhra-nagda)- a mission to achieve a travel time of 12 hours between delhi to mumbai.

supply of , adjustable straight crank (300mm x 450mm) as per rdso drg no.sa-3417/m

supply of cat a store spares for tata tpr 1212 32 sak tc 4 x 4 ba em no 10e 66889 chassis no mat424088bzc05846 of 99 rcc gref , 3223310080 rubber seal ( seal holder joint hsg ) , 257433457801 sealing ring ( axle shaft seal ) , 261833453101 bearing tapper roller inner , 257433453104 bearing tapper roller ( outer ) , 250626207801 double lip oil seal ( rear ) , 260435303102 tapper roller brg , 206035313002 bearing cylindrical roller , 257433750104 assy drive shaft left c...

bengaluru-salem section: ctr (p) of exg. 52kg/90 uts rails on 52kg psc sleepers of 1540nos/km with 60kgs/90 uts rails on 60kg psc sleepers of 1660 nos/km for a length of 14.65 km from km 205/350-220/000 sl in sr.den/s/sbc section.

supply of machine crushed ballast in dhl depot.

supply of , wrench for loosening nut of injector assembly to dlw part no. 15610731, emd part no. 9555886 and drg.no. mt02gm0177.

supply of , 1-1/2 inch square drive heavy duty l handle. length - 900mm, rod dia - 50 mm, others as per drawing attached. black finished/chrome plated. material - chrome vanadium steel, quality - 31crv3 handle with square drive as per din 3120-d/20, iso-1174. make - honiton / lulex / gedore / facom / jfb / mekaster.

supply of , centering device complete to schaku coupler drg no.- 40.1000.10.1(2). as per rdso specn. no.- 61-b- 36/rev.-68-1, with amnd. slip no.- 1 of october-2016.

supply of , emu motor coach bogie with bolster (without bull gear) to icf drg no.ac/emu/motor coach.221 00 001 000 06.

supply of , timing belt, part no. 5m - 08 -350, timing belt, part no. 25 at10 length 5200 mm. (5.2 mtr. each), timing belt, part no. 50 at20 length 13 mtr. (13 mtr each), timing belt, part no. 15 at 5 1500 mm. open end. (1.5 mtr each). note- f.o.r. rcf kapurthala pb.

supply of , f2 feed valve to dlw part drg.no.11376545 alt ''''a''''.

supply of , spring for side bearer arrangement of blc wagon to rdso drg.no.contr- 9404-s/15, alt-12, item no.3.confirming to rdso specification no.wd-01-hls-94 [rev.3] with amendment no.3 of august 2019.

bengaluru-jtj section:- supply, installation of track based rail lubricators (8 nos) in sr.den/east/sbc section including execution for two years after free operation of one year. maintenance period 24 months

supply of , set of cover angles for ac3t lhb coaches, as per drawing: mplcoa3tl version 1 (mdts 133 rev.05,mdts118 rev.01 & l.no.md46271 dt.12-11/03), packing instruction: frp ceiling sheet/side wall panels/frp component: self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallic parts to be protected with plastic/nylon/frp caps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble she...

supply of , earthing resistor to rcf drg.no.lw-71246. note: this item is reserved for procurement from rcf approved sources only

supply of , step size medium phosphorous brake shoe for wheel diameter below 1050 mm, as per ir part no. d/bg-1753/x2, alt-8 or latest & rdso material specification no m&c/mtd/101/2007 as per drg.no. rdso's drg no. d/bg-1753/x2,alt-8 or latest specn: rdso specification no m&c/mtd/101/2007

supply of , board terminal tb-33 a,b to emd pt no. 8354091 and dlw pt.no. 18350781 to dlw drg. no. 9518021 alt-hb., borad terminal tbra-8pt emd part no. 8395468 and dlw pt no. 18350800 for hhp locomotives., board terminal tb33e-15pt emd part no. 8283970 and dlw pl no. 18350938 for hhp locomotives., board terminal 6pt kit bar emd part no. 8434754 and dlw pl no. 18350537 for hhp locomotive., set of board terminals for ecc2 (emd dual cab loco use). set consists of: 1) terminal board - 18 pt to emd...

supply of , leather punch set of 10 (ten) pieces. (each set consisting of one no each for hole sizes 6,8,10,12,13,14,16,19,22 & 25 mm.) dia x length of each piece are: (1) 6 x 100 mm, (2) 8 x 100 mm, (3) 10 x 100 mm, (4) 12 x 110 mm, (5) 13 x 110 mm, (6) 14 x 120 mm, (7) 16 x 120 mm, (8) 19 x 120 mm, (9) 22 x 140 mm, (10) 25 x 140 mm.

supply of , set of 2 items 1) terminal receptacle to emd part no. 8272337, dlw part no 18350161 = 01 no. 2) terminal receptacle to emd part no. 8250906, dlw part no 18350045 = 01 no.

supply of , adjusting pull rod for bogie brake to icf drg.no. emu/m-3-2-063 alt-f for 700/1400 hp demu/dpc.

supply of , gauge for minimum clearance lash adjuster to emd part no: 8107788.

supply of , control node assembly epcu ft 5000 to kbil part no. 789992.

supply of , pin for upper articulation of ir03h pantograph as per ccpl part no c0h920.

supply of , kit overhauling for double check valve to kbi/nyab part no.1140529 consists of 06 items as detailed: 1) o-ring to kbi/nyab pt.no.b48576,qty/set:1 no. 2) retaining ring to kbi/nyab pt.no.468629,qty/set:1 no. 3) hexogon nut to kbi/nyab pt.no.467955,qty/set :1 no. 4) o ring to kbi/nyab pt.no.b33742,qty/set:2 nos. 5) o ring to kbi/nyab pt.no. k4140 ,qty/set: 3 nos. 6) piston to kbi/nyab pt.no.c76695,qty/set:1 no. (child part of microprocessor controlled air brake system to pl no.1745409...

supply of , oil skimmer belt, pu transparent (100 percent pu) endless, width : 200mm, thickness 2 mm, endless length 4400mm, working temp <60 deg c, oil skimmer belt, pu transparent (100 percent pu) endless, width : 200mm, thickness 2 mm, endless length 5000mm, working temp <60 deg c.

supply of , tap changer switch group fibre glass front cover (small) with fire retardant properties for bhel emus to kpa drg. nos. (1) er/kpa/el/gr.1he.243 e. items- 1, 3 to 7 and 9 to 15. (2) er/kpa/el/si.3he.588c.

supply of , circulating air box, as per drawing: lh44300 alt c mdts133 rev.04,mdts118 rev.01 & l.no.md46271 dt.12-11/2003, packing instruction: frp ceiling sheet/side wall panels/frp component: self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallic parts to be protected with plastic/nylon/frp caps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper ta...

supply of , non - asbestos 'l' type composite brake block for freight stock to r.d.s.o's drg.no. wd - 99062 - s - 01 alt.no.- 4 and r.d.s.o's specn.no. wd - 13 - abr - 2006 with amendment no. -1 of may 2007

supply of , supply of rcc cable marker as per drg.no.cste / cn / ofc / 1.the lettering on the cable marker will be "tele".

supply of , overhauling kit for analog convertor to knorr bremse pt no: kit-1-774009. (child part of microprocessor controlled air brake system to pl no.17454098)

supply of , lower side wall sheet drawing no. icf/sk- 153, alt.[d] & n. rly alt.[1] item 3.

supply of , spohn & burkhardt 2axis master controller 4-0-4 notch, stayput operation type each axis, with 9poles (contacts)each axis operated by individual cams to give the switching programme as per drg. wap/el/sk-712, on both axis and as per per kom nr2021309. the 9 poles will be housed in 5nos.double contact blocks on each axis.type ref:vnso 55 fn 18v 4-0-4 notch.

e-tn-32/20-21/supply of gear coupling suitable for exhauster and worm shaft for rb-733 coal mills. 1. gear coupling.,

supply of handle axie, washer 4 mm thick for handle axie, m12 x 1.75 x 40mm long, m 12x 1.75mm nut, high tensile m 10 x 1.5 x 40mm long bolt, nyloc nut for m 10 bolt, ball bearing, chain with coupling, spacers for handle, nitride or chromium cup washer, nitride rubber seating ring, hexagonal road coupling, pump head assembly with front cover and third plate, handle assembly, water tank assembly, connecting road 12 mm x 3 m long, cylinder assembly for im-iii /ii, lower valve assmbly, upper valve...

supply of , modified side bearer (rubber spring) assembly as per rdso specification no.vl-03 (rev.1) and confirming to rdso drawing no: skvl-127, alt-11 or latest.

supply of , micro controller based event recorder for emd locomotive to dlw part no .18190054 and emd part n0. k1819001, rdso spec. mp.0.3700.12 (rev.00) jan 2009.

supply of , set of toothed spring washer and hex head screw. set consists of 02 items as follows. (1) toothed spring washer m3 to din 6798 type a (externally toothed ) cadmium plated( for m3 size). for details refer drg.no.3twd.112.090 ref no.09--01 no./set. (2) hex head screw m3x8mm with a slot on head 1.5mm wide 2.5 mm deep t is:1364-t brass. for details refer drg.no. 3twd.112.090--02 no./set. note: the above items are child part of ep contactor.

supply of , ( 31 3064 9444 03 01 ) supply of one coach set of layout of notices (non braille) for lwfcw ac coaches to drawing no. lwfcwac-6-4-001 alt-a, item nos. 3,7,8,18,19,22 ,23,27 and 28.

supply of , arc chute assembly non asbestos based for shunting contactor to clw drg. no. 1twd.111.110 with part drg and spec. no. 4tes.111.019.alt-3

supply of , a set of ring spanner consist of 12 items.(sizes in mm)(6x7),(8x9),(10x11),(12x13),(14x15), (16x17),(18x19),(20x22),(21x23),(24x27),(25x28),(30x32) total 12 piece=1 set make-taparia/john bhnadari/stanley or equivalent.

supply of , alluminium bus bar for roof fitting 'p' type comprising of ref. no.'a' to drg. no. clw/es/sk-1/c- 49/alt-b, sheet no.11,12,13 with alluminium ferrule and checknut.