tender for repairs to 5 cusec discharge x 10mtr head of pumping unitii along with allied works at lift irrigation station rathana.. , decoupling of 5 cusec pump of pumping unit no ii from motor and then dismantling pump from the base frame. carriage & shifting of dismantled pump and motor of lift irrigation station rathanaon head load through path in fields to roadside using manual labour and then to workshop by carriage vehicle. dismantling of 5 cusec discharge end casing pump of pumping unit ii of lift irrigation station rathanaat workshop by way of extracting out all worn out/damaged parts i.e. pump shaft, bearings, sleeves, bush, check nuts, nuts & bolts, gland studs. repairs to pump shaft after turning to bearing size and threading at positions of check nuts. providing and fitting 2 nos of new bearings as per sample size on driving and non-driving end of the pump, 2 nos neck rings, 2 nos shaft protection sleeves, 2 nos check nuts, nuts & bolts, providing and fitting of 2 nos new gland studs on ends of pump. repair to bearing housing on driving and non-driving ends of pumping unit by turning and fitting of bush to make inner diameter of bearing housing suitable for fitment of bearing. reassembling all parts of pump with proper greasing of bearings and providing and fitting of gasket sheet between upper and lower part of the pump. providing and fitting of graphite packing of suitable size on both ends of pump. replacement of coupling pulley of pumping unit no ii by way of fabrication of new coupling set as per sample and according to the size of motor and pump shaft. providing and fitting of 8 nos new coupling nuts & bolts, rubber bushes, key way. back shifting after carrying out repairs of pump and motor to site. the job includes loading, un-loading, fitting,testing,manual labour, carriage charges of vehicle (to & fro), tools & tackles etc repairs to 25hp motor of pumping unit no ii of lift irrigation station rathana by extracting out old damaged winding manuall