bids are invited for boq ( q3 ) ( boq 01 ) total quantity : 1-1 bitumen black top preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broomand finally fanning the cleaned surfaces with gunny begs to remove all loose dirt and dust etc. and applying evenly a prime / tack coat with bituminous primer paving bitumen of grade vg-10 @5 kg per 10 sqm of road surfaces and providing bituminious premixed semi-dence asphaltic concrete 30mm consolidated thickness with 5.5% binder contenet using paving bitumen of grade vg-30 by weight of total mix, mixed in computerised hot mix plant and spreading with mechenical paver, rolled and compacted to required camber and gradient and rolled with 8 to 10 power roller capacity complete all as specified and directed. note: the design mix will be done from approved lab before commencement of work. ii ) in the event of variation in the mix design in the percentage of binder content on minus side, the difference in quantity of binder content will be adjusted as per actual rate of procurment or market rate , which is more of grade vg-30 bitumen. however no adjustment shall be applicable if excess quantity of binder content is used / approved in the execution of work under this item. 2 pot holes repair to potholes any depth, not exc 1 sqm each including sweeping free from dust & mud or water, scoring sunken surface in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat at 5 kg per 10sqm, putting in premixed bituminous macadam, well rammed & sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size again well rammed ( including supply of premixed macadam, binder & chippings ) , depth of potholes exc 30mm and rolled with 8 to 10 power roller capacity complete all as specified and directed. 3 thermoplastic paint m&l for preparation of new previously untreated surfaces to receive the thermoplastic paint and making of guide lines, dashes, arrows, letters etc with reflective thermoplastic paint 2.0mm to 2.50mm thick, white or golden yellow etc colour as required, using glass beads necessary for achieving reflection on roads, pavements and the like of any description and any width complete all as specified and as directed.