tender for for the work against sanctioned package no. 12/2024-25 (under deposit scheme) under electricity urban distribution division-ii, gorakhpur, package number 12/2024-25 approved in the deposit scheme under electricity urban distribution division-ii gorakhpur (111 of the assistant commissioner (food), safety and drug administration, gorakhpur for the regional analytical laboratory. details of the work for getting the electrification work done on full turnkey basis for connection of k.v.a, 2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 11/0.4 kv 400 kva transformer 4 straight through (3x120 sq mm) 5 jointing kit for 11 kv xlpe 3x120 sq mm 6 11 kv xlpe 3x120 sq mm 7 11 kv ppmc (15/5a) 8 11 kv electronic tvm meter 9 11 kv vcb (o/g) ctr 200/100/5a 10 st pole 11 mtr long 11 rail piece for tf 12 11 kv tpmo 13 11 kv top channel 14 11 kv dropper angle 15 11 kv pin insulator 16 acsr weasel conductor 17 11 kv fuse set 18 earthing complete 19 11 kv pin with nut bolt 20 ss base angle 21 cross bracing m.s angle 22 supply offollowing material/fitting complete in all respect :- 23 11 kv feeder pillar box suitable for 11 kv xlpe cable 3x120 sq mm cable 24 lt protection (acb) suitable for 400 kva transformer 25 danger board with clamp 26 barbed wire 27 number plate 28 hdpe pipe dia 6 29 11 kv al.lug 30 clamps for top,dropper angle,etc with nuts & bolts 31 gi pipe dia 6 inch 32 nuts & bolts of different sizes 33 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1/6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories (top channel, dropper angle etc.) as per required. all required materials such as holding clamp/stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 (cement, sand & 40 mm brick ballast), grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (material provided by contractor).making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 34 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 35 earthing of st pole by ms earthing rod & 6 swg earthing wire as per respo norms. 36 laying of hdpe pipe 6 inch diameter for laying of 11 kv xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (hdpe pipe 6 inch dia with elbow and socket for 11 kv cable will be supplied by contractor) 37 laying and dressing of under ground 11 kv xlpe cable into hdpe pipe by horizontal drilling method as per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 38 dressing, tagging and safe laying of 11 kv xlpe cable under concrete roadside trench with necessary material. (all necessary materialsprovided by contractor) 39 erection of 11 kv xlpe cable jointing kit/straight through with complete work 40 hoisting & looping of 11 kv xlpe 3x120 sq.mm.cable providing 6 dia gi pipe 3 m long with complete work 41 construction of t/f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 (cement, sand & concrete) grouting with 2 nos. ismc size 125x65x6 mm (confirming to is 808:1989) of 2000 mm long for resting. all required materials will be provided by the contractor. 42 grill fencing of 11/0.4 kv s/s shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50x50x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. the work is including painting of fencing as per norms. work will be done as per respo specification. 43 fabrication, errection, commissioning & testing of 400 kva t/f on double pole/plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs (confirming to is 8309), z clamp, nuts & bolts will be supplied by the contractor. 44 chemical earthing of transformer (body+neutral) as per is code 3043 - 1987 specification (materials will be provided by contractor) 45 erection offuse set 46 erection oftpmo 47 installation of ppmc & 11 kv ct/pt pole mounting unit 48 earthing of ppmc & ct/pt unit 49 erectionof11 kv vcb o/g ctr 200/100/5a 50 fabrication & erection of 11 kv feeder pillar box including making plinth 51 earthing offeeder pillar box & 11 kv vcb o/g ctr 200/100/5a 52 installation of tf lt protection (acb) 53 earthing of tf lt protection (acb)