tender for the work under deposit scheme in area of electricity urban distribution division-i, gorakhpur ( running tender ) - 1 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 2 11 kv ctpt pole mounting unit 3 11 kv electronic tvm meter 4 11 kv ppmc 5 11 kv electronic tvm meter 6 11 / 0.4 kv 250 kva transformer 7 11 / 0.4 kv 400 kva transformer 8 11 kv xlpe cable 3x185 sq mm 9 11 kv xlpe cable 3x120 sq mm 10 11 kv xlpe cable 3x70 sq mm 11 i / d & o / d c / j kits suitable for 3x70 sq mm xlpe cable 12 straight through suitable for 3x70 sq mm xlpe cable 13 i / d & o / d c / j kits suitable for 3x120 sq mm xlpe cable 14 straight through suitable for 3x120 sq mm xlpe cable 15 i / d & o / d c / j kits suitable for 3x185 sq mm xlpe cable 16 straight through suitable for 3x185 sq mm xlpe cable 17 11 / 0.4 kv 25 kva transformer 18 11 / 0.4 kv 63 kva transformer 19 11 / 0.4 kv 100 kva transformer 20 s.t pole 11 mtr. long 21 s.t pole 9 mtr. long 22 pcc 8.5 mtr long 23 acsr dog conductor 24 acsr weasel conductor 25 lt ab cable ( 3x95+1x70+1x16 ) sq.mm. 26 lt ab cable ( 3x120+1x95+1x16 ) sq.mm. 27 11 kv pin insulator with pin 28 11 kv disc insultor with fitting 29 11 kv dropper angle ( 100x50x2028 mm ) 30 11 kv s / s base angle 31 11 kv top channel 32 11 kv v type cross arm 33 11 kv d.o. fuse set 34 11 kv tpmo with polymer insulator 35 lt xlpe al. 3.5x70 sq mm 36 lt xlpe al. 3.5x150 sq mm 37 lt xlpe al. 1x240 sq mm 38 lt cable 1x400 sq mm 39 stay set complete with 5 kg wire 40 earthing complete 41 t-off channel ( 125x65x1300 ) mm 42 supply offollowing material / fitting complete in all respect :- 43 hdpe pipe dia 160 mm pn 6 pe 80 grade 44 g.i pipe dia 6 inch 45 g.i pipe dia 4 inch 46 lt distribution box with clamp 47 lt shackle insulator 48 lt clamps 49 insulated dead end clamp with i hook 50 suspension clamp with i hook ( insulated ) 51 lt insulated piercing connector 52 lt pvc cable 1x35 sq.mm. for energizing d.b. 53 f bracket 54 holding clamp with nuts & bolts 55 al lugs 70 / 150 / 240 / 400 sq mm 56 nuts & bolts of different sizes 57 copper z clamps 58 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 59 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / pcc clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 60 painting of pole by double coating aluminum & red oxide paint. paint will beprovided by contractor 61 earthing of st pole by ms earthing rod & 6 swg earthing wire as per respo norms. 62 fabrication, errection, commissioning & testing of25 / 63 / 100 / 250 / 400 kva t / f on double pole / plinth with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 63 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 64 erection offuse set 65 erection oftpmo 66 laying, stringing, sagging, binding and jumpering of acsr dog / weasel conductor for lt / ht line with fixing of lt clamps / other clamps, shackle insulator and nuts&bolts off size as per required. 67 chemical earthing of transformer ( body+neutral ) as per is code 3043 - 1987 specification ( materials will be provided by contractor ) 68 laying, stringing, sagging, binding and jumpering of abc cable ( size may vary ) of lt line with fixing of distribution box with clamp, insulated dead end clamp with i hook, suspension clamp with i hook ( insulated ) , lt insulated piercing connector, xlpe 1x35 sq.mm. al. cable for enerzing db, xlpe 1x16 sq.mm. 69 hoisting & looping of 11 kv xlpe cable providing 6 dia gi pipe 3 m long with complete work 70 erection of 11 kv xlpe cable jointing kit / straight through with complete work 71 installation of ppmc & 11 kv ct / pt pole mounting unit 72 earthing of ppmc & ct / pt unit 73 laying of hdpe pipe 6 inch diameter for laying of 11 kv xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984 / 1995 and shall have wall thickness of 6.20 to 7.10 mm ( hdpe pipe 6 inch dia with elbow and socket for 11 kv cable will be supplied by contractor ) 74 laying and dressing of under ground 11 kv xlpe cable ( size may vary ) by horizontal drilling method as per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site required. 75 laying and dressing of under ground 11 kv xlpeby digging method using sand & bricks as per resspo norms. 76 laying and sagging of overhead 11 kv xlpe cable as per site required. 77 dressing, tagging and safe laying of 11 kv xlpe cable under concrete roadside trench with necessary material. ( all necessary materialsprovided by contractor ) 78 construction of t / f plinth of size 2x2x1.2 mtr with the help of first class brick & 9 masonary in the ratio 1:4 cement & sand coarse. filling the structure completely andplastering outer surface as per respo norms. top of the plinth covered with 4 rcc slab of ratio 1:1.5:3 ( cement, sand & concrete ) grouting with 2 nos. ismc size 125x65x6 mm ( confirming to is 808:1989 ) of 2000 mm long for resting. all required materials will be provided by the contractor. 79 grill fencing of 11 / 0.4 kv s / s shall be made of rectangular