the work sanctioned against package no. 52 / 2023-24 ( under business plan 2023-24 ) under electricity urban distribution division-i, gorakhpur-2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 33 kv 3x300 sq.mm. xlpe cable 4 st pole 11 mtr long 5 ms angle 50x50x6 mm 6 ms channel 100x50x50 sq.mm. 7 earthing complete 8 stay wire 4.0 mm 9 cable joiting kit h&s, 33 kv, 300 sq.mm o / d 10 cable joiting kit h&s, 33 kv, 300 sq.mm s / t 11 supply offollowing material / fitting complete in all respect :- 12 clamp forst pole 13 hoarding hanging clamp 14 nuts & bolts 15 clamp for xlpe cable support 16 the excavation of 2 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 17 the excavation of 1 no foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of single pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor.grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block ofsize 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) .making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 18 painting of pole by double coating aluminium & red oxide paint. paint will beprovided by contractor 19 earthing of st pole by ms earthing rod & 6 swg earthing wire as per respo norms. 20 laying and sagging of overhead 33 kv 3x300 sq mm xlpe cable as per site required. 21 erection of 33 kv 3x300 sq mm xlpe cable jointing kit with complete work