BRR:8666555 Tender for Rate Contract For Supply, Installation, Configuration & Commissioning Of Fortinet Secure Sd-Wan Components (Licenses & Hardware) And Comprehensive Operation & Maintenance Of The Entire Sd-Wan Infrastructure (Existing & Proposed) For Kerala Police , Fortigate 1100E Sdwan Device. , Fortigate 1100E Device With 5-Year Comprehensive Warranty, License And Support. , Ngfw/Utm License Subscription With 1-Year Validity, For Fortigate 1100E (Including License Activation, Configuration And Support). , Ngfw/Utm License Subscription With 3-Year Validity, For Fortigate 1100E (Including License Activation, Configuration And Support). , Ngfw/Utm License Subscription With 5-Year Validity, Fortigate 1100E (Including License Activation, Configuration And Support). , Fortiwi-Fi 40F Sdwan Device , Fortiwi-Fi 40F Device With 5-Year Comprehensive Warranty, License And Support. , Ngfw/Utm License Subscription With 1-Year Validity, For Fortiwi-Fi 40F (Including License Activation, Configuration And Support). , Nngfw/Utm License Subscription With 3-Year Validity, For Fortiwi-Fi 40F (Including License Activation, Configuration And Support). , Ngfw/Utm License Subscription With 5-Year Validity, For Fortiwi-Fi 40F (Including License Activation, Configuration And Support). , Sdwan Centralised Management (Fortimanager) , License Subscription For Centralized Fortimanager With 1-Year Comprehensive Warranty, License And Support , License Subscription For Centralized Fortimanager With 3-Year Comprehensive Warranty, License And Support , License Subscription For Centralized Fortimanager With 5-Year Comprehensive Warranty, License And Support , Sdwan Centralised Log Storage & Management (Fortianalyser) , License Subscription For Centralized Fortianalyser With 1-Year Comprehensive Warranty, License And Support , License Subscription For Centralized Fortianalyser With 3-Year Comprehensive Warranty, License And Support , License Subscription For Centralized Fortianalyser With 5-Year Comprehensi

BRR:8666447 Annual Plan-Kannur Dp, Proj. No. 82/26- Pala Ghss Infrastructure Development And School Maintenance Works In Muzhakkunnu Gp Annual Plan-Kannur Dp, Proj. No. 82/26- Pala Ghss Infrastructure Development And School Maintenance Works In Muzhakkunnu Grama Panchayat-General Civil Work

BRR:8666422 Tender for Annual Plan-122-Infrastructure Developments To Ayurveda Hospital -General Civil Work

BRR:8666106 Basic Infrastructure Provision For Crpf Accommodation At Irbn Camp Wagheri Valpoi Under The Jurisdiction Of Valpoi Police Station For Ensuing Lok Sabha Election 2024.

BRR:8665565 Tender For Improvement To Earthing Infrastructure And Lightening Arrester At Af Stn Memaura

BRR:8665437 Bench Terracing And Land Development At Thermat Chemday Village

BRR:8665436 Tender For Ground Levelling/Land Development At Skindyang

BRR:8664170 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Asansol North P.S, Under Asansol Division, Pwd

BRR:8664169 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Salanpur P.S, Under Asansol Division, Pwd.

BRR:8664168 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Andal P.S, Under Asansol Division, Pwd.

BRR:8664166 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Budbud P.S, Under Asansol Division, Pwd.

BRR:8664165 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Coke Oven P.S, Under Asansol Division, Pwd.

BRR:8664163 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Durgapur P.S, Under Asansol Division, Pwd

BRR:8664162 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Faridpur P.S, Under Asansol Division, Pwd.

BRR:8664161 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Kanksa P.S, Under Asansol Division, Pwd.

BRR:8664160 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under New Township P.S, Under Asansol Division, Pwd

BRR:8664159 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Asansol South P.S, Under Asansol Division, Pwd

BRR:8664158 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Barabani P.S, Under Asansol Division, Pwd.

BRR:8664157 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Chittaranjan P.S, Under Asansol Division, Pwd.

BRR:8664155 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Jamuria P.S, Under Asansol Division, Pwd

BRR:8664154 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Kulti P.S, Under Asansol Division, Pwd.

BRR:8664153 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Pandabeswar P.S, Under Asansol Division, Pwd.

BRR:8664152 Erection Of Temporary Infrastructure Of Kitchen, Dining Etc. For Capf And Tac In Connection With Loksabha Election-2024 At Different Schools, Colleges And Community Halls Under Raniganj P.S, Under Asansol Division, Pwd.

BRR:8663772 Renovation Of Icds Center At Langalhata (Land Development And Drain)

BRR:8663609 Tender for Land Development Of Shitala Temple In Barman Para, Jl-156, Plot - 1268

BRR:8662762 Bids Are Invited For Cyber Security Audit - Infrastructure Audit

BRR:8662253 Bids Are Invited For Cyber Security Audit - Security And Compliance Audit , Vulnerability And Penetration Testing - Network; Security Infrastructure Review, Malware Analysis, Security Code Review, Data Communications And Network Control Review; Ethical Hacking, Vulnerability Addressing, Plug-In Solution To Be Recommended, Ap..

BRR:8661960 Bids Are Invited For Hiring Of Creative Agency - Tender For Sitc Of Furniture, Electrical Appliances, It Systems And Cctv Surveillance Infrastructure At Multiple Locations In Tarikere Taluk; -; -; -; - ; -; -; -; -

BRR:8661769 Bids Are Invited For Vulnerability And Penetration Testing - Network; Security Infrastructure Review, Application Security Audit (Owasp Top 10), Data Communications And Network Control Review, Secure Configuration Review (Devices/Os), Malware Analysis; Vulnerability Addr..

BRR:8661028 Providing And Laying Paver Blocks From Chalavadi Yallappa House To Water Tank Ward No.11. 6) Construction Of Drain From Bainer Hanumantha House Back Side To Batha Hanumantha House Ward No.07.7)Construction Of Drain From Bainer Hanumantha House Front Side To Huch Buddappa Katte Ro Plant Front Side Ward No.7 At Kavithal Town (Manvi Constituency) In Sirwar Taluka Of Raichur District For The Year 2024-25.Under.Percentage Of 17.15Percent Within Percentage Of 60Percent For Infrastructure Fund

BRR:8660336 Tender for Selection Of Service Provider To Provide Infrastructure And Facility Management Services (Fms) At Pmc For 3 Years

BRR:8659772 Tender For Infrastructural Development Of Purbabinodpur Primary School

BRR:8657740 Kiifb- Fsh003-11 Strengthening Of The Fish Marketing Infrastructure In Five Districts Of The State- Nayarambalam Fish Market In Ernakulam District Civil, Electrical And Fire Fighting Works(Re-Tender)

BRR:8657739 Kiifb Fsh003-07- Strengthening Of Fish Marketing Infrastructure Of Seven Coastal Districts Of The State Pazhayangadi Fish Market In Kannur District Civil And Electrical Works

BRR:8657738 Kiifb Fsh002-07 Improving Educational Infrastructure In Selected Schools Of The Coast Of Kerala-Educational Infrastructure Works At Kannur District Phase 1- Ghss Palayad In Kannur District-Maintenance Work(Re-Tender3)

BRR:8653402 Bids Are Invited For Selection Of Laboratories For Testing Of Products/Material - Soil; Provn Of Hyg And Sanitation Facilities (Bathroom/Toilet Blocks Alongwith Allied Infrastructure) For Various Units In Poonch; Number; Provn Of Hyg And Sanitation Facilities (Bathroom/T..

BRR:8652417 Tender for Providing Infrastructure Part I.E Ht Line And Dtc For Providing 3 Ph Pww Connection At Village Wathoda Tal Shirpur Dist Dhule

BRR:8652329 Tender For Addition / Alteration To P-11 Bldg At Cgra Meenambakkam Chennai; 2 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed 3 Material and labour for rendering 15mm thick in Cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement etc., complete all as specified and as directed. 4 Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed.Note: WPC will be measured and paid separately. 5 Material and labour for rendering 5mm thick in Cement mortar 1:3 on fair faces of concrete surfaces in ceilings, Chajja surfaces and finished even and smooth without using extra cement complete all as specified and as directed. 6 Material and labour preparation of newly plasterredsurfaces of walls and applying threecoats of white washcomplete all as specified and as directed. 7 Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc., and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of wall care putty 3mm thick all as per manufacturers specification etc., complete all as specified and as directed. 8 Material and labour for preparation of newly plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. 9 Material and labour for preparation of newly plasterredsurfaces of ceilings and applying threecoats of white wash complete all as specified and as directed. 10 M&L for preparation of old treated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed. 11 Material and labour for Complete removal of old plastered surfces of walls, pilasters and cornices etc., including preparation of surfaces and applying Distemper two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of wall care putty 3mm thick all as per manufacturers specification etc., complete all as specified and as directed. 12 Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed. 13 Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.18Sqm but not exceeding 0.38 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to matchall as specified and as directed. 14 Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or 350mm x 250mmor of size matching to floor tile as approved by GE,fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed. 15 Material and labour for Chequered cement concrete tiles (Ultra) of any size/shape, 22-25mm thick,set and jointed in neat cement slurry in floors and pointed with grey cement and pigments match to tiles laid over and including 15mm thick screed bed in cement mortar 1:6 completeall as specified and as directed. 16 Material and labour for Marble work 18 to 20mm thick with Green Marble stone slab, machine cut (table rubbed and pre polished) in steps, jambs, pillars, window cills, cooking platforms and the like (in single piece) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade ofmarble stone slab over a screed bed/backing coat of 15mm thick in cement mortar 1:4 including nosing half round bull nose finish at edges and machine polishing to edge to give high gloss finish and cutting of three numbers of grooves in steps etc., complete all as specified and as directed. 17 Material and labour for Marble work 18 to 20mm thick withMakrana white stone slab,machine cut (table rubbed and pre polished) in steps, jambs, pillars, window cills, cooking platforms and the like (in single piece) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade ofmarble stone slab over a screed bed/backing coat of 15mm thick in cement mortar 1:4 including nosing half round bull nose finish at edges and machine polishing to edge to give high gloss finish and cutting of three numbers of grooves in steps etc., complete all as specified and as directed. 18 Material and Labour for Removing exisiting Stainless Steel post / railing 900mm height,cleaning the stainless steel surfaces to remove any debris or contaminants and polishing to stainless steel with specialised compounds like Enkays Green compound using buffing wheel to achieve a bright finish and refixing in position with necessary fixing arrangements like clamps, bolts, nuts grouting etc., complete all as specified and as directed.Note: Each 900m height Stainless steel pipe/post shall be measured as one unit. 19 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc., complete all as specified and as directed. 20 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm not exc 4sqm each along with fittings including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. 21 Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each with fittings complete all as specified and directed. 22 Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed. 23 Material and labour for Providing and fixing factory made uPVCwhite colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 ± 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 Nos., sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick plain sheet glass including necessary accessories complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 5mm thick sheet glass, wiremesh and all other connected accessories. [b] Net Opening will be measured for payment purpose. 24 Supply, Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( ± 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 6.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 6.0mm thick sheet glass and all other connected accessories. [b] Net Opening will be measured for payment purpose. 25 Supply, Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profilewilh wall thickness of 2.3mm ( ± 0.2mm). Door profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Doortransmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 6.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: The unit rate quoted by contractor shall include the cost of 6.0mm thick sheet glass and all other connected accessories. Net Opening will be measured lor payment purpose. 26 Supply, Providing and fixing factory made uPVC white colour casement (Openable) ventilators made of extruded profiles with wall thickness of 2.3mm ( ± 0.2mm). Window/ventilator profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 5.0mm thick sheet glass and all other connected accessories. [b] Net Opening will be measured for payment purpose. 27 Supply, fabricate and fix 5mm thick toughened glass (Reflective or tinted glass) structural glazing fixedto external wall with uPVC frame made out of of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window/ventilator/Structural glazing frame profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated) and 5.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 5.0mm thick sheet glass and all other connected accessories. [b] Net Opening will be measured for payment purpose. 28 Material and labour for preparation of old painted steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. 29 Taking down steel tubing and connections includingremoving from site of 15mm bore pipe complete all as specified and as directed. 30 Taking down steel tubing and connections includingremoving from site of 20mm bore pipe complete all as specified and as directed. 31 Supply and Fix20mm bore (UPVC) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed with solvents as per manufacturers recommendations fixed on walls, ceiling or in floors including testing etc., complete all as specified and as directed. 32 Supply and Fix25mm bore (UPVC) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed with solvents as per manufacturers recommendations fixed on walls, ceiling or in floors including testing etc., complete all as specified and as directed. 33 Cuttings chases for concealed water tubing or concealed conduit, cutting n.exc 10 cms girth and making good in CM ( 1:3) in brick walls complete all as specified and as directed. 34 Supply and Fix Gun metal globe or gate valve of size 25mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, unionetc., complete all as specified and as directed 35 Supply and Fix brass chromium plated waste coupling 32mm bore for WHB complete all as specified and as directed. 36 Supply and Fix PVC waste pipe/Flush pipe 32 mm dia, 600mm long for urinal/WHB with fitting etc.,complete all as specified and as directed. 37 Supply and fix in repair 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. 38 Supply and fix in repair Brass chromium plated shower rose of size 125mm with swivel joints fixing to 15mm dia steel pipe or union complete all as specified and as directed. 39 .Supply and Fix in repair 15mm stop cock/angle cock,cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type) complete all as specified and as directed. 40 Supply and Fix in repair 15mm bore Bib tap of cast copper alloy, fancy type, Chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 41 Supply and Fix PVC Connection pipe, 600mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed. 42 Supply and Fix in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube 8mm dia (PVC chromium plated) and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. 43 Supply and fix in repairs, fancy type looking mirror (600X750) with beveled edge mirror of selected quality glass, 6.0mm thick, mounted oncommercial plywood/MDF board and fixed with spacers to wall with wooden plugs and chromium plated brass screws etc., complete all as specified and as directed. 44 Supply and Fix in repairs of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide, 60cm long with chromium plated bracket guard and railing etc., complete all as specified and as directed. 45 Supply and Fix Soap dish brass chromium plated fixed with and including chromium plated brass screws with rawl plugs complete all as specified and as directed . 46 Supply and Fix Tubular towel rail, Brass chromium plated, 20mm dia,60cm long between flanges fixed with and including chromium plated brass screws with rawl plugs complete all as specified and as directed . 47 Supply and fix in repairs Ball brass valves of size 20mm dia, high pressure, with polythene float and fly nut complete and reducer of 25 to 20mm if required, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. 48 Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conformingto IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed. 49 Supply and fix 100mm bore dia cast iron floor trap with CP grating, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 complete all as specified and directed 50 Supply and Fix in repair stainless steel, Chromium plated grating with doom 100/110 mm dia without waste hole or with waste hole (to insert waste pipe from WHB /Sink) etc., complete all as specified and as directed. 51 Supply and Fix in repairs110mm bore UPVC (SWR) pipe of pressure not less than 6 Kg/Sqcm in single socketed, in any length with rubber ring joints,fixed to wall,ceiling and foors including distance pieces and stack clamp with nuts & bolts complete all as specified and directed. 52 Supply and Fix UPVC (SWR) bends any radius, 110mm bore complete all as specified and as directed 53 Supply and fix in repair vitreous china counter wash hand basin snow white of miniumum size560mm x 470mm (or)next higher size fixed in and including Granite slab of 20mm thick telephone black, machine polished in single piece of minimum size 900 mmx 600mm with necessary cutting and bevelling of exposed edges fixed with M-seal or Araldite to make leak proof joint and fixing of connected accessories of chromium plated brass coupling, 32mm bore Cast copper alloychromium plated Bottle traps, Cast copper alloy chromium plated brass centre hole mixer, PVC braided connection (two numbers), 15mm bore Cast copper alloyCP angular stop cock (valve) etc., complete all as specified and as directed.Note : [a]Counter wash hand basin shall be of Cat Part No. 1005A of Cera or equivalent model of other make specified in Particular specifications.[b]The unit rate quoted shall be deemed to include the cost of counter top WHB, 20mm thick telephone black machine polished granite slab, 32mm bore CP bottle trap, CP brass centre hole mixer, PVC braided connection - 2 Nos, 15mm CP angular stop cock and other fixing accessories. 54 Material and Labour for Providing precast cement concrete of 1:2:4 Type B0 using 12.5mm graded stone aggregate as in louvers and jallies 25mm thick (measured solid) and set in cement mortor 1:6including all mouldings but excluding frames complete all asspecifed and as directed.Note: Reinforcement bars shall be measured and paid separately. 55 Taking down existing cement plaster of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even (average 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate shall be provided wherever required) followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed including applying two coats of cement base paint over a coat of primer (after curing of specified time and drying the surfacesas required)over newly plastered surface including preparation of surfaces etc., complete all as specified and as directed. 56 Materail and labour for 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)complete all as specified and as directed. 57 Materail and labour for 75mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)complete all as specified and as directed. 58 Materail and labour for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as completed as Speciifed and directed . 59 Materail and labour for 5mm thick Solid PVC wall lining consisting of Single side prelam PVC sheet of PVC sheet color inclusive of Solvent Cement without relevant and fixing at site on PVC frame as completed all as specified and directed. 60 Supply and fix Vitreous china wash down water closet pan, pedestal pattern, floor mounted, colour white with all fittings including fixing bolts, flush pipe, Plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device (excluding flushing cistern) and P/S trap including connections to drain(or outgoing pipe)andtaking down existing water closet etc., complete all as specified and as directed. 61 Supply and fix in repairsPVC low level flushing cistern, white,10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle,bracket, 32mm bore steel chromium plated flush pipe etcand connecting to WC and water pipe lines etc.,complete all as specified and as directed. 62 Supply and fix in repairs vitreous China urinal, half stalltype complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed. 63 Materail and labour for Wooden flooring for badminton court/ Squash court with Kiln seasoned First class Teak Wood board treated with special anti-termite and water resistant lacquer, finished with 21 mm thick, 55 to 90 mm width and in random length in tongue and groove shape and the edges of the boards shall have a finger lock grove and the bottom side with air pass groove fixed overframe work made of commercial quality Fir/Spruce/ Pine wood runners of 70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10 mm thick EPDM rubber air cushioning pads by nails through the two wings at 350 mm c/c and the floor shall be machine sanded with floor sander machine and finished with Non-skid, DIN-certified Polyurethane Lacquer and marking the Game line in required colours before applying the finish coat etc., conforming to the specification for sports infrastructure of Sports Authority of India (SAI) and Badminton World Federation (BWF) standards complete all as per manufacturer instruction and as directed. 64 Materail and labour for preparation ofexisting Wooden flooring of Badminton courtby machine sanded with floor sander machine and polishing with Non-skid, DIN-certified Polyurethane Lacquer and remarking the Game line in required colours before applying the finish coat etc., conforming to the specification for sports Infrastructure of Sports Authority of India (SAI) and Badminton World Federation (BWF) standards complete all as per manufacturer instruction and as directed. 65 Supply and fix 18mm thick water proof, termite proof , borer proof and corrosion free PVC sheets of600 density,prelaminated on both sides of board as inCabinet unit and over head unit (Modular type) with approvedshade and fixed with all fittings and fixtures such aslock, knobs, soft closing hinges, telescopic hinges etc.,as per manufacturers instructions complete all as specified and as directed. Note :(i) If any damages caused to the existing structure shall be made good without any cost and the rate quoted by the bidder shall be inclusive of the above provisions . 66 E/M ITEMS 67 Material and labour for point wiring complete with two runs of 1.5Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS - 694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/floor and fixed on ceiling/ roof/ truss/ columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti-corrosive paint for housing the switches, sockets, fan regulator etc and covered with 3 mm thickplastic laminated sheet cover with cadmium plated screw, cup washer etc., complete concealed in walls and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and as directed for One light point controlled by one switch. Note :(a) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (b)The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate. 68 Material and labour for submain wiring complete with two runs of 4.00 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked of suitable size not less than 20mm external dia fixed on wall/ floor/ ceiling/roof mounting system along with conduit fittings and accessories with one run of 4.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 4.00 Sqmm multistranded cable andone run of PVC conduit shall be considered as one unit length. 69 Material and labour for submain wiring complete with two runs of 2.50 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked of suitable size not less than 20mm external dia fixed on wall/ floor/ ceiling/roof mounting system along with conduit fittings and accessories with one run of 2.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 2.50 Sqmm multistranded cable andone run of PVC conduit shall be considered as one unit length. 70 Material and labour for submain wiring complete with two runs of 1.50 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked of suitable size not less than 20mm external dia fixed on wall/ floor/ ceiling/roof mounting system along with conduit fittings and accessories with one run of 1.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 1.50 Sqmm multistranded cable andone run of PVC conduit shall be considered as one unit length. 71 Supply and Fix Switch piano, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and directed. 72 Supply and Fix Switch socket combination, 2 in 1, 3/5 pin, 5 Amps Flush type 240Volts complete all as specified and directed. 73 Supply and Fix Switch socketcombination, 2 in 1, 3 pin, 5/15 Amps Flush type, universal socket 240Volts complete all as specified and directed. 74 Supply and fix Ceiling rose, surface mount type, PVC/ Polycarbonate, with face bakelite 25 x 50mm three terminals, 230 Volt, AC Single phasecomplete all as specified and as directed. 75 Supply and fixingin replacementof Factory made sheet metal enclosure forTPN MCBDBs double door (Fixed flush to the wall), TPN, 415 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed. 76 Suppy and fix MCCB 100 Amps, 415 Volts, 36 kA braking capacity with Thermal Magnetic protectionall as per Cat No.4200 95 of Legrand or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed. 77 Supply and fix of MCB TP (Triple Pole) 63 Amps, 415 Volt, , breaking capacity 16 KA C series complete all as specified and as directed. 78 Supply and fix in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed. 79 Supply, fix, test and commissioning of 200Watts LED Flood Light luminaires, energy saving, environmental friendly, long life, pressure die cast aluminium housing IP66 protection Flood light with PC diffused lens enclosure over LED for glare free light suitable for sports court and general purpose lighting operation on AC single phase 220-240 Volt, 50 Hz supplyall as per Cat No.JETAADORNNXTFLS200WLED757SSYMTOTGV2 of Havells or equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size and taking down the old fitting complete all as specified and as directed.Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details. 80 Supply and fix 4 feet 1 x 20 Watts LED light fitting, Basic all purpose surface and wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver all as per Cat No.ENDURALINEARNEO BS20WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details. 81 Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 32 x 6mm means of bolts, nuts washers, check nuts as shown in electrical plate No. 3 connected to earthing test points including excavation and earth work PCC 1:2:4 type B-1(using 20mm graded aggregate) in PCC chamber RCC cover 50mm thick in RCC 1:2:4 type B-1 ( 20mm graded aggregate) with 8 mm TMT bars at 15 cm c/c in both ways with hooks, funnels with 20 mm dia GIwatering pipe medium grade, wire mesh and funnel 15 mm diaGI protection pipelight grade and testing on completion including taking outold u/s earthing accessories complete all as specified and as directed. 82 Earth continuity conductor or main earthing lead fixed to wall or recess or chasses or buried in groung or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron wire including taking down old unserviceable one complete all as specified anddirected 83 Supply and Fix MCB Single Pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including removing of old unserceable MCBcomplete all as specified and directed. 84 Supply and Fix MCBSPN, 32 Amps 10 KA, 240 V including removing of old unserceable MCBcomplete all as specified and directed. 85 Supply, fix, test and commissioning of Exhaust fan of size 450mm sweep, steel body, copper winding, 230V AC, single phase complete setwith metal blades, frames and louvers, connecting up including provn of threecore flexible copper wire of size 23/0.0076 from ceiling rose to exhaustfanincluding taking down old unserviceable exhaust fan and to be deposited at MES store etc., complete all as specified and as directed.

BRR:8652008 Tender for Development Of Infrastructure Facilities In Rural Market At Vivekananda Pally Market.S/H:-Const. Of Double Stories Market(Gf Shed & Ff Stall) At Vivekananda Pally Market Under Satchand Agri. Sub Division. S/H:-Installation Of 1(One) No. Small Bore Deep Tube Well (150 Mm X 100 Mm) Size For Irrigation Fitted With 2 Hp Submersible Pump Set Having Capacity 2000 Gph At 40 Mtr. Head In/C Laying Distribution Pipe Line During 2025-26 (2Nd Call)

BRR:8652007 Tender for Development Of Infrastructure Facilities In Rural Market At Damdama Bazar .S/H:-Const. Of Double Stories Market(Gf Shed & Ff Stall) At Damdama Bazar Under Satchand Agri. Sub Division. S/H:-Installation Of 1(One) No. Small Bore Deep Tube Well (150 Mm X 100 Mm) Size For Irrigation Fitted With 2 Hp Submersible Pump Set Having Capacity 2000 Gph At 40 Mtr. Head In/C Laying Distribution Pipe Line During 2025-26 (2Nd Call)

BRR:8651225 General Electrification Of Quarters, Pump Hose, Sales Counter Cum Security Cabin Of The Project Nabard Ridf Xxvii-Infrastructural Development Works In Daf Chelakkara In Thrissur District Electrification Of 1. Quarters 2. Pump Room 3.Sales Counter Cum Security Cabin

BRR:8650701 Tender for Deposit- Infrastructure Development Works To Sub Treasury Office, Angamaly-Electrification-General Electrical Work

BRR:8649453 Bids Are Invited For Custom Bid For Services - Outsourcing Of Conservancy For Maintenance Of Sports Infrastructure

BRR:8647873 Provn Of Transformer Upgradation Of Electric Network Allied Electric Infrastructure At Ihq Of Mod Army Tpt Unit Asc Under Ge U Electric Supply Delhi Cantt-10

BRR:8646580 Tender for Infrastructure Development Of Batrisha Singhasana Under Nandapur Block In The District Of Koraput For The Year 2025-26

BRR:8646343 Balance Work Of Upgradation Of Infrastructure At Kinfra Food Processing Industrial Park, Adoor

BRR:8646220 Strengthening Of Fish Marketing Infrastructure In Kollam District- Phase 2- Pathanapuram Fish Market In Kollam District Civil And Electrical Works

BRR:8645539 Infrastructure Development Of Barabari Jr High School Plastering Work Barabari Pri Kitchen Shed And Floor Repairing Mouza Barabari Jl285 Infrastructure Development Of Barabari Jr High School Plastering Work Barabari Pri Kitchen Shed And Floor Repairing Mouza Barabari Jl285sridam Sarkar Cement Concrete Road Mouza Chhayaghati Jl52jl52jl52jl49mouzaparahar Jl49

BRR:8644912 Bids Are Invited For Annual Maintenance Service -Data Center Assets - Amc Of Hci Solutio; Hyper Converged Infrastructure; Oem Authorised Service Provider

BRR:8643526 Bids Are Invited For Cyber Security Audit - Infrastructure Audit

BRR:8642640 Tender for Providing Infrastructure Facilities Including Pandal In Connection With The Conduct Of State Ksheera Sangamam 2025-26 (Padavu 2026) And Allied Programmes

BRR:8642398 Proj.No. 344/2023-24 (S0886/25), Additional Works For Incerasing Infrastructure Of Pundalatharam Abc Program Centre In Div 30 Of Kilikolloor Zonal- Electrification

BRR:8664376 Bids Are invited for Processer Card For Controller ,Cp471-00 , Vnet Ip Interface Card,Vi702 , Power Supply Distr. Board,Pdbfcstd B , Rs 485 Communication Module,P N- Alr121 , Terminal Board For Ai Card Wb,Yb2 , Terminal Board For Digital I O, Yokogawa , Keyboard For His,Yil Dcs,P N Aip830 , Prefab Cable F Digital Card,Akb331-M015 , Pre Fab Cable , Model Ks2-10 Mtr , Prefab Cable F Analog I O Card,Ks1-M0xx , Fcs Fan Unit,P Nfcsfanu-110 B , Power Supply Card For Nodes,Pw481-10 , Term Board F A Io Mod,P Nyaed5d-Di-11 A , Io Card,P Naab841-S53-S2 Atm4a-00-S1,Yi , Prefab Cable F Analog I O Card,Ks1-007A Total Quantity : 30

BRR:8660199 Tender For Repair And Maintenance Of Summer Appliances At Afs Hakimpet Under Ge (Af) Hakimpet; 2 Taking down the window type air conditioner of capacity 1.5/ 2.0 TR carefully from the installed position,applying blower to remove the complete dust, cleaning all the components with caustic soda and other cleaning agent, combing the condensor coil wherever required and testing on completion complete all as directed by Engineer-in-Charge. 3 Servicing ofindoor/ outdoor unit of split type air conditioner of capacity 1.5/ 2.0 TR carefully from the installed position, applying blower to remove the complete dust, cleaning all the components with caustic soda and other cleaning agent , combing the condensor coil wherever required and testing on completion complete all as directed by Engineer-in-Charge. 4 Taking down the evaporative type desert coolers of Capacity upto 5000 Cum/hr by disconnecting all the electrical connections cleaning all the components by removing the side panels and painting the coolers (for iron body/part only) withsinglecoat of synthetic enamel paint out side and moisture resistance primer inside with spray painting and fixing back the removed panel and reconnecting with electrical connections and writing the MES No complete all as directed by Engineer-in-Charge. 5 S & F in repairs including taking down of existing oldunserviceable spare parts of following cooling appliances complete all as specified and directed by Engineer-in-Charge:- 6 a)Starting Relay for Water cooler of capacity upto 150 ltrs 7 b) Starting Relay for Refrigerator of capacity upto 310 Ltrs 8 c) Thermostat for window type/ split type Air Conditioner of capacity upto 2.0 TR 9 d)Thermostat for Water cooler of capacity upto 150 ltrs 10 e) Thermostat for Refrigerator of capacity upto 310 Ltrs 11 f) Starting Capacitor for window type/ split type Air Conditioner of capacity upto 2.0 TR 12 g)Starting Capacitor for Water cooler of capacity upto 150 ltrs 13 h) Running Capacitor for window type/ split type Air Conditioner of capacity upto 2.0 TR 14 j)Running Capacitor for Water cooler of capacity upto 150 ltrs 15 k)Running Capacitor for Refrigerator of capacity upto 310 Ltrs 16 l) Capacitor for fan motor of window type/ split type air conditioner of capacity upto 2.0TR 17 m) Blower motor suitable for existing model (invertor/ non invertor) of indoor unit of split type air conditioner of capacity upto 2.0 TR 18 n) Indoor and Outdoor Coil Sensors ( Invertor/ Non Invertor) for split type air conditioners upto 2.0 TR 19 o) Outdoor Contact Relay for split type air conditioners upto 2.0 TR 20 p) Door beading for single and double door Refrigerator/ Water cooler of any size and capacity. 21 q) Sealed Compressor for 1.5 TR window/ split type air conditioner invetor or non invertor model including bracing the suction & discharge lines. Make - Carrier/Whirpool/Copeland or as existing make 22 r) Sealed Compressor for 2.0 TR window/ split type air conditioner invetor or non invertor model including bracing the suction & discharge lines. Make - Make - Carrier/Whirpool/Copeland or as existing make 23 s) Sealed Compressor for 40/80 ltrs capacity water cooler including bracing the suction & discharge lines. Make - LG/Kirloskar/Ericson or as existing make 24 t) Sealed Compressor for 150 ltrs capacity water cooler including bracing the suction & discharge lines. Make - LG/Kirloskar/Ericson or as existing make 25 u) Sealed Compressor for upto 180 ltrs capacity refrigerator including bracing the suction & discharge lines.Make - LG/Kirloskar/Ericson or as existing make 26 v) Sealed Compressor for above 180 ltrs and upto 310 Ltrs capacity refrigerator including bracing the suction & discharge lines. 27 w) Air filter cleanable, indigenous of suitable size for the split type air conditioners of capacity upto 2.0 TR 28 x) Condensor fan blade set for the window/ split type air conditioners of capacity upto 2.0 TR 29 y) Front panel (grill) suitable for existing model of split air conditioners outdoor unit of capacity upto 2.0 TR 30 z) Nitrile tubing over gas circulating copper tubes for suction and discharge lines of split type air conditioner of capacity upto 2.0 TR 31 aa) PCB Board unit suitable for existing make of split type air conditioners (Invertor/ Non Invertor) of capacity upto 2.0 TR 32 ab) Condensing coil copper for refrigerator 310 Ltrs capacity 33 ac) Copper tubes of suitable size for suction and discharge lines for split type air conditioners including necessary bracing and testing Note: One run of suction, one run of dicharge shall be measures as one unit length. 34 ad) Submersible water pump suitable for evaporative type desert coolers of capacity upto 5000 Cum/hr 35 ae) Khus khus pads/ Honey Pads of various model (set of 3 Nos) for the evaporative desert coolers of capacity upto 5000 cum/hrs 36 af) PVC hose pipe alongwith necessaery fittings ad PVC distributor suitable for existing model of evaporative type desert cooler upto the capacity of 5000 cum/hr 37 ag) Rotary/ piano type switch suitable for existing model of desert coolers of capacity upto 5000 CuM/Hr 38 ah) Fan blade set suitable for existing model of desert coolers of capacity upto 5000 CuM/Hr 39 aj) PVC Insulated and PVC Round Sheathed three Core, 1.5 sqmm Copper Conductor Heavy Duty Cables for Voltage Grade upto 1100 Volts 40 ak) PVC Insulated and PVC Round Sheathed three Core, 2.5 sqmm Copper Conductor Heavy Duty Cables for Voltage Grade upto 1100 Volts 41 al) Single pole and neutral enclosure MCB DB alongwith a 20 Amps rated SP MCB,two pin plus earth plug and socket, 230 Volts, 50 Hz 42 am) Plug top, 3 pin, 16 Amps, single phase, 230 volts 43 an) Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 15mm dia bore suitable for water coolers. 44 ao) PVC connection 15mm size with PTMT nuts of length 600mm 45 ap) Chromium plated push button tap of size 15mm dia bore suitable for water coolers 46 aq) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. 47 ar) PVC waste water pipe of size 32/40mm dia 48 as) PVC Insulated and PVC Round Sheathed four Core, 2.5 sqmm Copper Conductor Heavy Duty Cables for Voltage Grade upto 1100 Volts 49 at) Supply and fix in repair MCB SP 20 Amps, 240V suitable for split type air conditioner upto 2 TR 50 au) Supply and fix in repair Metal clad AC Male and Female socket suitable for air conditioner upto 2 TR 51 av) Supply and fix in repair evaporative coil suitable for air conditoner upto 2 TR Capacity 52 aw) Supply and fix in repair Condensing coil suitable for air conditoner upto 2 TR Capacity 53 Taking out the burnt fan motor from the following cooling appliances, cutting and removing the winding and Material & labour for rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and directed by Engineer-in-charge:- 54 a) Window/ split type Air Conditioner of capacity upto 2.0 TR 55 b)Evaporative type desert cooler of capacity upto 5000 Cum/hr 56 Material & labour for filling up & charging of environmentally suitable refrigerant for following cooling appliances after leak testing the complete system and making good by bracing including replacement of filter strainer copper and capillery tube of suitable size complete all as specified and directed by Engineer-in-Charge. 57 a) Window type Air Conditioner of capacity upto 2.0 TR 58 b) Split type Air Conditioner of capacity upto 2.0 TR 59 c) Water cooler of capacity upto 150 Ltrs 60 d)Refrigerator/Deep freezer of capacity upto 310 Ltrs 61 Taking out defective PCB control unit of split type air conditioners Invertor/ Non Invertor type of capacity upto 2.0 TR and rectifying the defects by replacing unserviceable ICs, diodes, capacitors, resistors etc and refing back and testing on completion complete all as specified and directed by Engineer-in-Charge. 62 Takingdown carefully the indoor and outdoor unit alongwith voltage stabilizer of Split Type Air Conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines fromits installed position and shifting to another location where directed and installing the indoor and outdoor units alongwith stabilizer at specified location and connecting all the electrical, suction and discharge lines and testing on completion for proper functioning complete all as specified and directed by Engineerr-in-Charge. 63 Material and labour for making hole in to the wall , stone masonary/brick work up to 80mm dia for installing/fixing of split type AC with and including making the surface smooth with cement mortar complete all as specified and directed. 64 Supply and fixing pre-fabricated MS bracket assembly (set of two) complete with nuts and bolts of suitable size for fixing of split type AC outdoor unit complete all as specified and directed. 65 Supply and fixing of Indoor unit of air conditioner upto 2.0 TR Capacity complete all as specified and directed by Engineer-in-Charge. 66 Supply and fixing of Outdoor unit of air conditioner upto 2.0 TR Capacity including compressor complete all as specified and directed by Engineer-in-Charge. 67 Taking down the stabilizer any type of capacity 4/5 KVA carefully from the installed position, dismantling the complete unit, cleaning all the components with makingrepair/replacement of minor parts of costing not more then Rs 500 andreassembling the complete unit and re-installing in its original position and testing on completion complete all as directed by Engineer-in-Charge. 68 Taking down the stabilizer any type of capacity 2/3 KVA carefully from the installed position, dismantling the complete unit, cleaning all the components with makingrepair/replacement of minor parts of costing not more then Rs 400 andreassembling the complete unit and re-installing in its original position and testing on completion complete all as directed by Engineer-in-Charge. 69 Supply only AC remote suitable for AC 1.5/2 TR window/split type (Invertor/ Non Invertor). Note- Material will be supplied as existing model or sample given by Engr-in-charge. 70 Supply and fixing of extra heavy duty remote battery 1.5 volt complete . 71 M&L for sub main wiring surface/recessed as required with two single core 6 sqmm PVC insulated and unsheathed copper conductor, multistranded 1100 volts grade through and including non metalic rigid PVC conduit including 6 sqmm copper conductor multistranded PVC insulated and unsheathed wire as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing U/S sub main wiring and making good the disturbed surface to match with the existing all as specified and directed.( Note :- Two run of 6 sqmm cable and one run of earth wire and one run of non metalic conduit shall be measured and paid as 01 RM. 72 M&L for sub main wiring surface/recessed as required with two single core 4 sqmm PVC insulated and unsheathed copper conductor, multistranded 1100 volts grade through and including non metalic rigid PVC conduit including 4 sqmm copper conductor multistranded PVC insulated and unsheathed wire as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing U/S sub main wiring and making good the disturbed surface to match with the existing all as specified and directed.( Note :- Two run of 4 sqmm cable and one run of earth wire and one run of non metalic conduit shall be measured and paid as 01 RM.

BRR:8658505 Construction Of Multipurpose Hall Using Peb (Pre-Engineered Building) At Rdc, Sdo Residence, Kanke Road, Ranchi

BRR:8657608 Tender For Provn Of Certain Spl Repair And Lbw Work Under Ge Dehradun; 1 Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 2 Material and labour for brick work with sub class B brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 3 Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair complete all as specified and directed. 4 Material and labour for 12-15 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed. 5 Demolition of reinforced cement concrete as in roofs, floors, beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. 6 Material and labour for RCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. 7 Material and labour for RCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed. 8 Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers including supports, overhangs etc. also spays between floors and beams etc. for flat fair finished surfaces complete all as specified and directed. 9 Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; nexc 200mm thick (horizontal or sloping) for flat fair finished surfaces complete all as specified and directed. 10 Supply and fixing for mild steel TMT bar 10 mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. 11 All as per item No 10 here in above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. 12 Dismantling of wrought iron or mild steel work of any description not otherrwise provided for complete all as specified and directed. 13 Supply and fixing for Framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 14 Dismantling of boarding, any description, fixed with screws in any position complete all as specified and directed. 15 Supply and fixing 3mm thick ACP sheet ACP (Aluminium composite panel) fixed with screws on existing mild steel frame complete all as specified and directed.Note: Mild steel frame will be measured and paid separately. 16 Supply and fixing for stainless steel 304 grade pre fabricated letters of size 18 height fixed in position by screws complete all as specified and directed. 17 Supply and fixing Acrylic pre fabricated logo of size 18 height fixed in position by screws complete all as specified and directed. 18 Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed. 19 M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) as in window or door cills, lintels, copings. kneelers, apex stones, posts, boundary pillars, bonders (for stone walling), brackets, etc. with plain fair faces, including chamfers, weatherings, throating etc. complete all as specfied and directed. 20 Excavation in trenches n.exc. 1.5 mtr wide and n.exc 1.5 mtr depth and getting out in any type of soil complete all as specified and directed. 21 Returning filling in incl spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed. 22 Removal of surplus soil to a distance n exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed. 23 M&L for Plain cement concretetype D-2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. 24 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etcpier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outcomplete all as specified and directed. 25 M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. 26 S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming toFe 410-W(Gde E-250) quality-A all as specified and directed 27 M&L for 304 grade stainless steel hollow tubes with base plate, gusset plate, bracing including stainless steel nuts and bolts welding etc as required ( TIG welding or Tungesten Arc welding) as in vertical posts for supporting the roof frame/truss including grinding and polishing complete all as specified and directed (Note:Roof frame/Truss not included in this Item) 28 S&F 3 mm thick Nylon netting with 25mmx25mm aperture for bird proofing fixed with screw to framed ceiling complete all as specified and directed. 29 S&F pre-painted semi-circular or straight (as directed) galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. 30 S&F polycarbonate sheets 8mm thick ,60 micron, ultra violet coated double layered coloured and as approved by GE and fixed with aluminium angles profile rubber gasket silicon screws etccomplete all as specified and directed. 31 M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed. 32 M&L for Brickwork (except bricks) with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 (bricks obtained under item No-1 will be used) complete all as specified and as directed. 33 Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. 34 M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed. 35 M&L for new plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1..50mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed. 36 M&L for complete removal of existing treatment of walls incl corners and applying two coats of distemper oil emulsion over applying of 1.50mm thick wall care putty finish wall surface even & smooth by roller complete all as specified and directed. 37 Material and labour for preparation of newly plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing complete all as specified and directed by Engr-in-Charge. 38 Material and labour for preparation of old plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces complete all as specified and directed. 39 M&L for preparation of new wooden painted surfaces including preparation and applying two coat of synthetic enamel paint any description, over a coat of pink primer, not overwise described, over 10 cm width/girth complete all as specified and directed. 40 M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. 41 Dismantling floor hearth or wall tiling including cement motor bedding (Including backing), removing serviceable tiles to stone and rubbish off the premises 42 M&L for Vitrified Ceramic tiles light shed /double charged 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith tile adhesive complete all as specified 43 Description same as per item No 42above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete. 44 M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existingtiling including cement mortar bedding (but not backing) andrubbish off the premisescomplete. 45 M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x450mm x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. 46 Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc. 47 S&F granite 12-15mm thick of any type ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in cement mortar 1:4 incl pointing in white cement complete all as specified and ditected. 48 Taking down chowkat with shutter n. exc 1.5 Sqm each complete all as specified and as directed . 49 Taking down chowkat with shutter exc 1.5 Sqmbut n.exc 4 Sqm each complete all as specified and as directed . 50 Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, teRunning meterite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed . 51 Supply and fixing 30 mm thick WPC factory made 100% solid flush designer door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed . 52 S&F 200 mm long, solid in one piece stainless steelbarrel tower bolts complete all as specified and directed . 53 S&F 150 mm long, solid in one piece stainless steelbarrel tower bolts complete all as specified and directed. 54 S&F 150mm size solid in one piece stainless steel handles,cast, fixed in stainless steel screwsall as directed complete all as specified and directed . 55 S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge. 56 S&F stainless steel sliding door bolts 204 grade,hasp and staple typewith bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and ditected. 57 S&F in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample. 58 Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. 59 S&F MSjoist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section,MS tubes, flats square bars etcfixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed. 60 S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. 61 M&L for two coat of synthetic enamel paint over a coat of primer including preparation onnew steel surfaces ofany description over 10 cm width or girth 62 Preparation of old Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as spd and directed 63 Dismantling of plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof coverings complete all as specified and directed. 64 S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.60 mm thick Mangalore parttern of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. 65 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed. 66 S&F 1200 mm x 1200 mm x 6 mm thick bevelled edge mirror of selected quality glass,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 67 S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass all as specified. 68 S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends completeall as speccified and directed as per approved sample complete all as specified and ditected. 69 S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed. 70 S&F in repair PVC Shelves 450mm of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) 71 Demolition of reinforced cement concrete, shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces all as directed. 72 M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed. Note : The work will be carried out upto tripple storey builing the rate of scafolding is included for this item also. 73 M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) forcolumns, pillars, piers, post and strut complete all as specified and directed. 74 M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for foundations, includingf rafts, footings, foundations beams, plinth beams, bases for columns etc complete all as specified and directed. 75 M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. 76 M & L forformworktosides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc.for fair finished complete all as specified and directed. 77 M & L forformworktosides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface complete all as specified and directed. 78 M & L forformworktoedges of concrete flats, treads, breaks in floors, window cills, concrete raillings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, hozontal or sloping and similar work exc 5cm but n exc 10cm etc.for fair finished surface complete all as specified and directed. 79 M&L for mild steel TMT bars 8 mm dia and over cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified complete all as specified and directed by Engineer-In- Charge 80 Supply and fixof CPVC pipes outer diameter 25mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceilings or laying in floors including fittings like elbow, tee, etc. including dismantling of old GI tubing complete all as specified and directed. 81 Supply and fixof CPVC pipes outer diameter 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceilings or laying in floors including fittings like elbow, tee, etc. including dismantling of old GI tubing complete all as specified and directed. 82 M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth. 83 Supply and fixing for rotational moulded polyethylene 1000 Ltrs Capacity white water storage tanks of weight not less than 33 kg (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 15 mm dia including dismantling of old tank complete all as specified and directed. 84 S&F in repair ball valve high pressureof PTMT with epoxy coated alum rod & high density plastic ball screwed for 15mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed. 85 S&F in repair CP toilet paper holder as approved by Engr-in-Charge. 86 S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed. 87 S&F in repair CP brass Central hole basin mixer fancy type 15mm dia all as specified and directed. 88 S&F in repair CP brass bib tap fancy type short body15mm bore screwed for iron pipe or for brass ferrule all as specified in SSR Part I . 89 S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 90 S&F in repair 15 mm bore Angle cock/stop valves (2 in 1), cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. 91 S&F in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and approved. 92 S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified. 93 S&F in repair brass chromium platedovehead shower with shower arm complete all as specified and directed. 94 S & F in repairs wash down water closet (EWC) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etccomplete all as specified and directed. 95 S&F of 40mm outer dia of CPVC pipe class 1 on wall /ceiling or laying in floor incl of all fitting i.e elbow,tee and socket etc, complete all as specified 96 S&F vitreous china, white, oval shape wash hand basin, flat size 550 x 400 mm including MS brackets including 12 to 15mm thick prepolished mirror granite fixed on RCC slab 1:11/2:3, 50mm thick with steel reinforcement (paid separately) cutting for and pinning in ends of brackets but excluding Waste pipe & with 32mm (PTMT) waste coupling (half or full threaded) minimum weight 32gm-45gms) & 15mm bore CP pillar tap supply only 25mm dia PVC (LDPE) of pressure 6Kg/cm2 down pipe 75cm long complete all as specified and directed. 97 S&F PVC connection 15mm size with PTMT nuts, of 450 mm length. 98 Taking down AC/Salt glazed warepipes and fittings upto 110mm. 99 S&F in repairs for 100mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed. 100 S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed. 101 S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed. 102 S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed. 103 S&F PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed. 104 S&F PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed. 105 S&F PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed. 106 PVC(SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed. 107 S&F in repairs PVC waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed . 108 S&F in repair CP steel Grating round with steel frame with hinge 100mm dia all as sample approved. 109 S & F for Anodised aluminium frame for doors, windows ventilators (Powder Coated)with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 110 S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. 111 Supply & fixing for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed by Engr-in-charge.Size of Track-Both Top & Bottom (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) 112 Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) 113 M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection inground floor and paving below or above ground level complete. 114 Dismantling wall and ceiling board,of any description complete all as specified and directed. 115 M & L 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed. 116 Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC concealed conduit not less than 25mm diawith all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including Modular metal flush boxes 1.6 mm thick, upto 60 mm deep of required size factory made for mounting modular switch, regulators etc with inner /outer cover and frame(white) ISI marked, fixed with brass screwsincluding taking down unsv point wiringof any sizefor the following type . Note: (i)The quoted rates shall be deemed to be inclusive formaking good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. 117 (a) One light point,controlled by one way switch. 118 (b) One fan point, controlled by one way switch through regulator. 119 (c) One three pin 5 Amp socket on same board with other switches 120 (d) One three pin 5 Amp socket on independent board 121 (e) Description all as per item No 116 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire. 122 Supply and fix modular switch single pole one way, one module, 230 Volts 6 Amp complete all as directed. 123 Supply and fix modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as directed. 124 Supply and fix modular switch single pole one way, one module, 230 Volts 16 Amp complete all as directed. 125 Supply and fix modular socket 16 Amps, 2/3 pin combined, two module, 230 Volts complete all as directed. 126 Supply and fix modular ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. 127 Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed. 128 S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . 129 S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. 130 S&F decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified. 131 Supply, fixing, connecting and testing of35 watt LED building security light luminaries with min 10 KV surge protector die cast alluminium housing LDR sensor for automatic operation complete suitable for and incl bracket 32 mm GI pipe bend to shape incl clamp fastner, bolts, nuts & washers of min 1.2 Mtr incl grouting etc and 3 core 1 sqmm PVC insulated cable from ceiling rose to light fitting complete all as specified 132 S&F Exhaust fan exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450mm, complete with louvers, shutters and connecting up ceiling rose to connectorblock of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted) 133 S&F Exhaust fan exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep250 m, complete with louvers, shutters and connecting up ceiling rose to connectorblock of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted) 134 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator (min 100w), Fan hook split type fabricated out of 12mm dia steel bar of length 30 cm duly painted with rod oxide old black paintand all accessories required to connection, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed 135 S & F sub main wiringwithPVC insulated unsheathed FRLSH cable 1100 Volt grade,with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one runPVC insulated unsheathedcable with multi stranded copper conductor colour code as a earth continuity and connected upto DBincluding taking down old unsv submain wiring of following sizes .Note:(i)Tworun of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface withusing PVC rawl plugs etc.(iii) Phasecolour code must be follow i.ePhase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral. 136 2 x 6 Sqmm+ 1 x 6 sqmm 137 2 x 4Sqmm + 1 x 4 sqmm 138 S & F inreplacement Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacityfully insulated copper Bus Bar for each phaseand 02 neutralshroudedbar ,2 earth bar and cable tie for cable managementwith reversible door for IP-43 protection,415 voltand suitable for fixing FP MCCB 100/125 Amps as incomer andcombination of SP/TP MCBs asoutgoings offollowing capacity including taking down old unsv MCCB DB,s.Note: Suitable MCCB and outgoing MCBs will be measuredand paidseparately under relavant items of this schedule. 139 4 Way VTPN DB 140 S & F in replacement MCCB ,4 poleICS=100% ICU at 415 voltswith thermal-magnetic release and adjustable overload settingoffollowing capacity . 141 63 Ampswith rupturing capacity 16 KA 142 S & F inreplacementMCB SP 240 volts B Curve 10 KA . including connection with suitable size copper lugs of following capacity 143 MCB SP 6 to32 Amp.240 volts 144 MCB SPN 40to 63 Amps 240 volts 145 S & F in replacementDistribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed 146 S & F in replacementMCB DB, sheet metal enclosures double door.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:- 147 8 way SPNDB. 148 Material and labour for Earthing complete with galvanized ironearth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board andtesting on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc.GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed.Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtrfrom the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. 149 XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. 150 Sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying & stretching the cable in trenches, including hand punning and consolidating, complete, all as specified. Note:- For payment purpose punned thickness shall be measured. 151 Bricks, old size sub class `B laid in trenches with width wise along the alignment of the cable as protection complete. 152 S&F tube Light grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. 153 Supply and fixing LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equiped with IP66 protection with impact and corrosion resistant complete with driver and lamp. 154 XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately). 155 Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out. 156 Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed. 157 Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed . 158 Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified. 159 M&L for brick for laying un-reinforced precast concrete cable coverClass LV, Type I, flat, size 250mm x 150mm x 40mmfor protection of U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exc 10mm over UG cable in trenches all as directed 160 M&L for GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed ofsize 40mm dia(make: prakash surya/jindal/TATA) 161 S&F sheet metal enclosures TPN 415 Volt4 way with suitable rated bus bar for double door IP-43DBscomplete all as specified and directed . 162 S&F MCB TPN415 Volt 10 KA63 Amp conforming to IScomplete all as specified 163 S&F MCB SP(single pole) 240 volt 10 KA 5 to 40Amp, conforming to relevant IS complete all as specified & directed. 164 Supply and fixing LED bush light 09 watt , 3000K, efficiancy 80im/w, made with single piece pressure die cast aluminium housing and IP 65 degree of protection suitable for outdoor applicatios like garden , tree uplighting including suitable fixing arrangement complete all as directed 165 M&L for submain wiring with 3 runs(N+P+E) of 2.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductorFRLS cable 1100 volts grade drawn throughand including concealed/surfacePVC conduit pipe of medium duty not less than15 mm dia including necessary PVCconduit specials and connecting with suitable size thimble complete all as specified anddirected. Note:-3 runs of2.5 Sqmm size PVC copper cable, and one run of PVC conduit shallbe measured as one unit length. 166 Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equiped with IP66 protection with impact and corrosion resistant complete with driver and lamp. 167 XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately). 168 M&L for brick well burnt class B as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abuting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed. 169 S&F SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified and directed

BRR:8653482 Bids Are Invited For Custom Bid For Services - Provision Of Soil For Peb Light Weight Structure For Testing Multi Kw At Chess

BRR:8653080 Bids Are Invited For Gd Room Pre-Fabricated Shelter (Relocatable) Total Quantity : 2

BRR:8652022 Tender for Construction Of Pre Cast Slab To Storm Water Drain From Judgemanai Area To Imam Nagar Areain Ward No 01 In Ambur Municipality

BRR:8651074 Tender for Construction Of A Pre-Engineered Building Of Size 40Mx30m And Height As Per Attached Sketch Including Design, Fabrication, Supply And Erection For Developing An Rvsf At Our Steel Fabrication Unit, Cherthala

BRR:8642629 Annual Plan-IJK BP-Karalam GP-Rewiring at the FHC - Projcet No:SO106/2026-FHC Rewiring-General Electrical Work -1 Electrification 1.001 90.2.2.1:Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point 1.002 90.2.2.3:Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories).Single control light point without ceiling rose - Short point 1.003 90.2.2.4:Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point 1.004 90.2.2.5:Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories).Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Short point 1.005 90.2.2.6:Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. 1.006 90.2.2.7:Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories).Independent plug - Short point 1.007 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture 1.008 90.3.21.3:Supply & installation of light fittings on C/U shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. C/U brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture 1.009 90.3.1:Conveyance, installation, testing and commissioning of pre-wired fluorescent light fittings with all accessories and fluorescent lamps of all types directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required 1.01 90.4.3:Conveyance installation testing and commissioning ceiling fan of all sizes using standard accessories excluding resistance type regulator wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or extending the original wiring etc. as required. 1.011 OD150068/2025-2026:Supplying and providing LED Bulk head fitting with E27 holder and giving connection with 16/0.24 mm PVC insulated and sheathed copper flex wire conforming to relevent ISS etc as required. 1.012 OD150054/2025-2026:Supply and providing 5/7 Watts LED lamp on existing batten/ pendent/ bracket holder as required 1.013 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. 1.014 OD152072/2025-2026:Supply of 1200 mm BLDC ceiling fan having 26 W complete with service value minimum 5.0,Air delivery minium 210(cubic meter /miniute)copper winding,suitable for 230V/240V single phase AC supply. (havells,crompton/bajaj/equivlent make) 1.015 OD152073/2025-2026:Supply and providing PVC white shade on the existing batten fitting etc as requiredd . 1.016 OD152074/2025-2026:Supply of 400 mm metal frame wall fan complete with standard acessories etc as required (havells,crompton/bajaj/equivlent make) 1.017 OD152075/2025-2026:Dismantling the exising ceiling fan and fitting the same in a new position after cleaning and replacing the quotter pin ,shackle,wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire etc if necessary or extending the original wiring etc. as required. 1.018 OD152076/2025-2026:Supplying and providing SPD -type 1+2 -(I max -100KA) 4 module in the existing panel and giving connection etc. as required. 1.019 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. 1.02 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 1.021 90.4.10:Conveyance, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan. 1.022 OD150055/2025-2026:Supply of 200mm sweep exhaust fan in metal body suitable for single phase 240V ac supply etc as required . 1.023 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 1.024 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 1.025 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 1.026 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) 1.027 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 1.028 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 1.029 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 1.03 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 1.031 90.10.3.14:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A SP switch with indicator 1.032 90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket 1.033 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 1.034 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm 1.035 1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm 1.036 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm 1.037 1.17.4:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 1.5 sq. mm 1.038 1.17.6:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm 1.039 1.17.15:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm 1.04 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm 1.041 1.17.29:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm 1.042 1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm 1.043 1.17.13:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm 1.044 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm 1.045 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm 1.046 90.6.5.9:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 0.75 sq mm 1.047 90.9.1.1:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.50x50mm Cable Management System with base and lid 1.048 90.9.1.7:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap 1.049 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 1.05 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door 1.051 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 1.052 90.11.1.11:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43) 1.053 2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole 1.054 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 1.055 2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 1.056 2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 1.057 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 1.058 90.16.3.3:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm GI strip 1.059 90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) 1.06 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) 1.061 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 1.062 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) 1.063 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 1.064 OD150057/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt . 1.065 OD150058/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 12x3mm brass nut and bolt . 1.066 90.3.17.2:Supply, conveyance and erection of the following sizes of B class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.40 mm dia GI pipe 1.067 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 1.068 OD150051/2025-2026:Preparing completion and test certificates for KSEB connection 1.069 OD150056/2025-2026: Supplying and providing 63 A HRC fuse unit with fuse on the existing box and giving connection etc as required . 1.07 OD152101/2025-2026:Rearranging the existing electric connection to the building including servor room and balansing the load in each phase for getting better efficiency as well as smooth function of the institution .as required . 1.071 OD152100/2025-2026:Dismantling the existing electrical installation without further damage and convey the same to the proposed place in the same compound etc as required. 1.072 OD152105/2025-2026:Supplying and providing Fire extinguisher on the existing wall using suitable hook etc as required .(CO2 -2/3 Kg)

BRR:8666484 Tender for Construction Of Paver Block Road From Holong River To Bablu Oraon In Salkumar Gp In Falakata Ps Under Apdzp

BRR:8665820 Tender for Construction Of Paver Blocks Road At Dhandadihi Samsan Sansad Iii Sl No 74

BRR:8665642 Tender for Providing Paver Block ( In Internal Village) At Village Udane Tal Dist Dhule

BRR:8665573 Tender For Repair Maintenance Of Mes Installation Bldgs And Services At Af Stn Memaura.; 1 Demolition of cement concrete as in ground floors & pavings not exc. 15 cm thickness (below or above G.L.) complete all as directed. 2 M&L for 50mm thick PCC 1:2:4 of type B-1 using 20mm graded stone agrregate as in sub base of floors etc complete all as specified and directed. 3 Supply & fix kota stone slab 18-20 mm thick as in floor or stair trades(in one pieces ) and edges rounded etc overand including 15mm screed bed in cement mortar 1:6 & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing to achive mirror finish complete all as specified and directed . 4 Supply & fix kota stone slab 18-20 mm thick as inrisers(in one pieces) /skirting/dado etc overand including 10mm screed bed plaster in cement mortar 1:4 & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing to achive mirror finishcomplete all as specified and directed . 5 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed . 6 M&L for 300 x 600 x 7/450x300x7 mm thick Glazed ceramiccoloured tiles(premium quality) incl dark shade border/heighlighter in dado/skirtingset and jointed in neatcement slurry and pointed with white or colourcementto matchover and including 10mm plasterin cement mortar 1:4 complete all as specifed. 7 M&L for 300 x 200 x 7 mm thick joint freeGlazed ceramiccoloured tiles (premium quality) incl dark shade border/heighlighter in dado/skirtingset and jointed in neatcement slurry and pointed with white or colourcementto matchover and including 10mm plasterin cement mortar 1:4 complete all as specifed. 8 M&LNon skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm in floors set and jointed in neat cement slurry and pointed with whiteor cement to matchover and including 15mm screed bed in cement mortar 1:6 complete all as specifed. 9 Demolition of brickwork built in cement mortar complete all as specified and as directed. 10 M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 complete all as specified and directed. 11 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed . 12 Material & labour for rendering 15 mm thick on other than fairfaces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed. 13 M/L 15mm thick rendering in CM 1:4 with with water proofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.(Note- WPC Qtyshould be measured and paid to separately.) 14 Supply only water proofing compound complete all as specified and directed. 15 Material & labour for rendering 5mm thick in cm 1:4 as in ceiling finished even & fair faces complete all as specified and directed . 16 M & L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper complete all as specified and directed. 17 M&Lcomplete removal of existing treatment of any description from old decorated surface of walland applying two coats of oil bound distemper complete all as specified and directed. 18 M&L preparing ofnew plastered surface of walls and applying two coats of cement base paint complete all as specified and directed. 19 Material & labour for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed . 20 All as ser item No. 67 above but two coat on old ceiling surfaces. 21 M&L for applying two coats of exterior emulsionpaint white or tint on walls/ chajja/ facias/ fins on old surfaces including complete removal of existing treatment complete all as specified and directed 22 Ditto as above sl item No. 69But on newplastered surface 23 Dismantling stone slabs or tiles or PCC tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified and as directed. 24 M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed. 25 M&L for sand filling under floors or in foundations including watering and consolidation complete all as directed. 26 S&F for machine pressed precast concrete interlocking paver block any shape and sizewith grey cement and no pigment confirming to IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and as directed. 27 M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick/30cmx30cmx25mm thick,laid over 15 mm thick screed bed in CM 1:6 in floor set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the color of tile complete all as specified and directed 28 M&L PCC type B-1,1:2:4 (20mm graded stone aggregate) as in coping, side kerbs, mud stops etc including necessary formwork complete all as specified and directed. 29 S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular section of size 44.45mmx47.62mmx 1.88 mm thick and weight 0.943 Kg/Rm of approved make conforming to IS 733 and 15:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at i.e junctions, Le at top, bottom. and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight. mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 30 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections of size 75mmx32mmx1.5mm thick and weight 1.005 kg/Rm of approved make conforming to 15 733 and 15:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge 31 S&F 3.8 mm thick tinted glass of approved make and colour complete all as specified and directed 32 S&F 100 mm long Aluminium powder coated tower bolt complete all as specified and directed 33 M&L for 6mm ACP board exterior grade both side prelaminated with decorative choice fixed to framework with screws all as specified and directed by Engr-in-charge. 34 M&L for 17/18 mm MDFboard exterior grade both side prelaminated with decorative choice fixed to framework with screws all as specified and directed by Engr-in-charge. 35 S & F 100mm long aluminium handles cast type anodized, complete all as specified and directed. 36 S & F of aluminium anodised barrel tower bolts of extruded section and fixed of 100mm longall as specified and directed. 37 S & F of continous piano hinges mild steel bright finished width of flaps 30mm while openall as specified and directed. 38 S&F hasp and staple 125mm long aluminium anodised complete all as specified and dircted 39 M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in plinth protection etc complete all as specified and directed. 40 Dismantling structural steel work including doors/gates but excluding framed truss etc complete all as directed. 41 S&F steel rolling shutters, 1.00mm thickness of laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one coat of primer, erected in position as indicated, complete push pull or manual type complete all as specified and as directed. 42 M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified 43 M & L preparation of old steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified 44 S&F for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including dismantling of existing old fencing wires complete as directed (each line wire to be measured) 45 All as per above item No 23 but except barbed wire (restraining, resecuring including making good staples etc)

BRR:8665545 Tender For Provision Of Certain Minor And Revenue Works Under Ge Dehradun.; UPVC Shutters for doors (Panel doors outdoors) Window.ventilators & PVC Shutters for doors Panel doors, moulded doors) Window, wenators & frams WPC door shut door bame bound Wooden flush doorpantigauge shutters for door and windows Pre-cainted steel doorwindes, vermiators & hames Bleel windows, ventilaton, door frames, shutters Z saction steel windows Aluminum shutters homes for doors windows & vendors Alumimum door and window tinga Plain/pin headed routed sheet glass Putty for Olazing UPVC/PVC False căng Mital false coăng Gypsum boardthecelling Non-Asbestos Fibre Cement Boad Class Reinforced Gypsum False Cening Wall Panelling Plain Partide Board Particleboard ceiling Ply Board Pre-laminated Partiste Board MOF&f Boards Aluminum Composite Paris (ACP) CGI/PO Sheet Galvalume aluminium zinc coated roof sheet CP Bam Fittings & Accessones PTMT Bath Fittings & Accesso Stop Valves Gate Valves Flot Valves Brass Stainless steel washbasis/WC Stainless she Kitchen San Startless Steel Plate Rack Seat Cover for EWC PVC Flushing calem rain water pipistings & accessories confirming to 18. 308012000 SWR pipes as per 18-13852 for pipes & 15-14735 for UPVC pipes&ing/CPVC pipes & in HDPE/MDPE PVC Pipe Looking Mor Imerse Paint and Prime Exames Or Paint and Pimer White comen & wall care putty Cenert Based Paints and Primer Cement Concratinocking Paver Blocks Chaque any typa/Wat adding f PVC / Wooden Fing Tile Adhesive Grou APP MEMBRANE Chemical for antiteite treatment (chloropyrifos 20% Lindain 20% Integral WP-Compound Construction Chemical Bumi Produ Asbest shest HOPE Water storage Tank Rotational mouldid closed top Structure Blan Plywood for pensestal puгрома (18 303 Mak PVC Tiles Wooden Finoting Barbed WiverConcertina Coll Dour and windows (M SGSW Pipes $3-661-1997) 58 Stainless steel basket 59 Telescopic ball bearing 60 Auto closing Hinges E/M MAKES 1 LT CABLES U/G (XLPE/PVC) Heavy Duty armoured/unarmouredupto 1100V Aluminium& copper solid/stranded as per IS 1554 Pt 1 & 7098/1988 Pt l 2 PVC Insulated 1100 V grade ISI marked FRLS Internal wiring cables with copper conductor 3 HT XLPE CABLE upto 66 KV as per relevant IS 5 SUBMERSIBLE COPPER FLAT CABLE DI PIPE & FITTINGS 4 6 ERW MS PIPES 17 GI PIPES 8 STEEL CONDUITS/MS CONDUITS 9 PVC CONDUITS/ Casing & Caping 10 LED light fittings for indoor/outdoor use 11 Solar based LED street light fittings 12 MCB/ELCB/RCCB/RCBO/ISOLATORS 13 MCCB/MPCBS 14 VCB/OCB/SF6 CIRCUIT BREAKER/HT SWITCH GEAR PANELS 15 ACB 16 GOD/DO SWITCH(AIR BREAK) 17 MOTOR PROTECTION CIRCUIT BREAKER (MPCB) 18 DISTRIBUTION BOARDS 19 HT RING MAIN UNIT 20 HT LOAD BREAK SWITCH 21 CHANGEOVER SWITCH/STARTER/HRC FUSES 22 MODULAR SWITCH/SOCKETS 23 ELECTRIC SWITCHES/SOCKETS/BELL PUSH 24 FAN REGULATOR(ELECTRONIC) 25 LAMP HOLDER/CEILING ROSE 26 ELECTRIC CALL BELL 27 TIME SWITCHES 28 COMPACT SUBSTATION 29 TRANSFORMERS UPTO 500KVA TRANSFORMER 33 KV STEP DOWN/TRANSFORMER 33/0.433 KV STEP DOWN VOLTAGE STABLIZER UPTO 5 KVA SERVO VOLTAGE STABLIZER HT VOLTAGE STABLIZER CURRENT & POTENTIAL TRANSFORMERS/CTS(LT) SWITCH FUSE/MAIN SWITCH/FEEDER PILLAR BOX AND LT DISTRIBUTION PANELS/POWER FACTOR COMPENSATOR HARMONIC FILTER/AUTOMATIC POWER FACTOR CONTROLLER CAPACITOR BANKS HT & LT PUSH BUTTON/SELECTOR SWITCH/INDICATING LAMP MEASURING INSTRUMENTS/RELAYS/CTS/AMMETER/VOLTMETER/POWER FACTOR METER & FREQUENCY METER KWH METER TEMPER PROOF DIGITAL/ANALOG GEYSERS Kitchen/Bathrooms CEILING/EXHAUST/CABIN FANS EXHAUST FANS PVC BODY AIR CIRCULATOR/TURBO VENTILATOR WALL MOUNTED FAN CABLE BOXES HEAT/COLD SHRINKABLE ALUMINIUM/ACSR CONDUCTORS HT/LT INSULATORS ... more in document

BRR:8664058 Tender for Repairing Of Paver Block At 32A To 106 Aurobinda Sarani In Ward No-17.

BRR:8664054 Tender for Improvement Of Footpath By Laying Paver Block At Lansdown Terrace In Ward No 85 Under Br Viii Kmc. (Apas/01/161/275/0002)

BRR:8664031 Renovation Of Pathway With Paver Block At Waria Ic Premises ,Ward No-13 Under Dmc Area

BRR:8664030 Supplying Fitting And Fixing 100Mm Thick Paver Block Over Granular Sub Base Course And Water Bound Meacadam At Sagarbhanga Truck Terminus, Within Ward No 29 Under D.M.C Area. Supplying Fitting And Fixing 100Mm Thick Paver Block Over Granular Sub Base Course And Water Bound Meacadam At Sagarbhanga Truck Terminus, Within Ward No 29 Under D.M.C Area.

BRR:8663999 Tender for Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately As Per Technical Specification Clause 202 For Rural Roads Of Mord , Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand. , Ordinary Cement Concrete (Mix 1:1.5:3) With Graded Stone Chips (20 Mm Nominal Size) Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant Is Codes. (I) Pakur Variety , Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc Initial Straightening And Removal Of Loose Rust (If Necessary), Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Intersection, Complete As Per Drawing And Direction. (A) For Works In Foundation And Upto Roof Of Ground Floor/Upto 4 M (I) Tor Steel/Mild Steel Ii. Jsw / Jspl / Shyam / Srmb / Bmsal / Elecrosteel / Ssl , Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4 M Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns, Lintels Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Works (Upto Roof Of Ground Floor) (F) 25 Mm To 30 Mm Shuttering Without Staging In Foundation , 100 Mm Thick Interlocking Designer Concrete Paver Block M-50 Grade For Hightraffic Zone, Bus Terminus, Industrial Complex, Mandi Houses Etc

BRR:8663998 Tender for Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately As Per Technical Specification Clause 202 For Rural Roads Of Mord , Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand. , Ordinary Cement Concrete (Mix 1:1.5:3) With Graded Stone Chips (20 Mm Nominal Size) Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant Is Codes. (I) Pakur Variety , Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc Initial Straightening And Removal Of Loose Rust (If Necessary), Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Intersection, Complete As Per Drawing And Direction. (A) For Works In Foundation And Upto Roof Of Ground Floor/Upto 4 M (I) Tor Steel/Mild Steel Ii. Jsw / Jspl / Shyam / Srmb / Bmsal / Elecrosteel / Ssl , Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4 M Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns, Lintels Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Works (Upto Roof Of Ground Floor) (F) 25 Mm To 30 Mm Shuttering Without Staging In Foundation , 100 Mm Thick Interlocking Designer Concrete Paver Block M-50 Grade For Hightraffic Zone, Bus Terminus, Industrial Complex, Mandi Houses Etc

BRR:8663997 Tender for Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately As Per Technical Specification Clause 202 For Rural Roads Of Mord , Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand. , Ordinary Cement Concrete (Mix 1:1.5:3) With Graded Stone Chips (20 Mm Nominal Size) Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant Is Codes. (I) Pakur Variety , Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc Initial Straightening And Removal Of Loose Rust (If Necessary), Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Intersection, Complete As Per Drawing And Direction. (A) For Works In Foundation And Upto Roof Of Ground Floor/Upto 4 M (I) Tor Steel/Mild Steel Ii. Jsw / Jspl / Shyam / Srmb / Bmsal / Elecrosteel / Ssl , Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4 M Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns, Lintels Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Works (Upto Roof Of Ground Floor) (F) 25 Mm To 30 Mm Shuttering Without Staging In Foundation , 100 Mm Thick Interlocking Designer Concrete Paver Block M-50 Grade For Hightraffic Zone, Bus Terminus, Industrial Complex, Mandi Houses Etc

BRR:8663017 Improvement Development Of Side Berms By Pdg. Cc Paver Blocks Along Holy Child School At A-10 Street To Poorvi Marg In Vasant Vihar In W. No. 153/Sz

BRR:8663013 Improvement of drain and both side by pdg. Brick work, plaster, precast RCC slabs/ gratings, RCC and CC paver blocks from Tamil Sangam Marg to CGHS Dispensary School in Sec-6 RK Puram in Ward No. 152/SZ

BRR:8663012 Improvement and development of back lane, berms and side lanes from H.No.D.1/28 to D.1/35, from D.4/1 to D.4/8 Vasant Vihar, D.1/48 to D.1/51 Paschim Marg and D.7/1 to D.7/11 Poorvi Marg in Vasant Vihar by pdg. CC paver blocks and RMC in Ward No.153 /SZ.

BRR:8663006 Construction of drain and side berms from H. No. 108 to 109 to 188/163 via H. No. 164 in Satya Niketan by pdg. Brick work, plaster, Precast RCC slab/gratings, RCC and CC paver blocks in Ward No. 153/SZ

BRR:8662752 Providing the BT road at ward 10 Somanathapuram Harijina Colony and Paver Block road harijana colony cross cut roads in vettaikaranpudur Town Panchayat.

BRR:8662713 Tender for Urban Improvements - Strengthening At Km 0/0 - 1/0 Of Central Jail Round Road Including Providing Paver Blocks -Tvm-144

BRR:8662707 Construction Of Compound Wall And Paver Block Arrangements At Sivan Kovil Municipal Primary School Ward No 19 In Melur Municipality

BRR:8662699 Tender for Construction Of Compound Wall And Paver Block Arrangements At Graveyard Of Sacred Heart Church At Ashok Nagar In Pudukkottai City Municipal Corporation

BRR:8662696 Tender for Providing And Laying Of bituminous Surface And Paver Block Footpath At Melanda Mada Street (180/019/R154) And Paver Block Footpath At Sakthi Nagar Main Road (180/003/R116) And Sakthi Nagar 2Nd Main Road (180/003/R214) In Mangadu Municipality.

BRR:8662680 Tender for Tirupathur District Mplad 2025-26 Providing Paver Block From Adidaravidar Colony Chinnakannu House To Indra House In Sevathur Panchayat

BRR:8662357 Tender For Deuli Talatumba Road For The Year 2025-26.; 1 Earth work in excavation of foundation in hard soil with all leads and lift including rough dressing breaking clods and leveling bed and depositing the excavated materials away from the working area etc. complete as directed E.I.C. 2 Supplying, filling in foundation & plinth with sand in layers not exceeding 150mm thick including watering and ramming withcost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge. 3 Plain Cement concrete of proportion M15 in foundation using 4cm sizeblack broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6) thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. 4 Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 etc. complete i as per direction of the Engineer-in-charge. 5 Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

BRR:8662346 Tender For Special Repair Bolagarh To Haripurpatana Road; 1 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of Engineer-in-charge. 2 Earth work in excavation of foundation in hard soil with all leads and lift including rough dressing breaking clods and leveling bed and depositing the excavated materials away from the working area etc. complete as directed E.I.C. 3 Supplying, filling in foundation & plinth with sand in layers not exceeding 150mm thick including watering and ramming withcost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge. 4 Plain Cement concrete of proportion M15 in foundation using 4cm sizeblack broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6) thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. 5 Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 as per direction of E.I.C. 6 Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

BRR:8660668 Tender For Construction Of State Tax Office Building At Gauripur Checkpost District Baghpat - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 In all kind of soil upto 1.5m depth R.W 3 In all kind of soil upto 1.5m to 3.0m. depth 4 In all kind of soil upto 1.5m to 3.0m. Depth R.W 5 In all kind of soil upto 3.0m to 4.5m. depth 6 In all kind of soil upto 3.0m to 4.5m. Depth R.W 7 In all kind of soil4.5m to above . Depth R.W 8 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift 9 Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors. 10 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 11 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mmapart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 12 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in R.C.C. Raft foundation and footing with approved stoneballast. (Using1:1.5:3Mix concrete)M-20 13 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) foundation 14 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) All work up to plinth level : 15 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR SLAB] 16 R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in the proportion of 1:1.5:3 in Slab and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.R.W 17 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR BEAM] 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR COLUMN] 19 Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).[FOR arches, archribs, domes] 20 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 21 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in.foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) 22 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in.foundation and plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand) 23 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 24 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 25 Same as in item no. 11 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 26 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface beforetreatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making patternof 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 27 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 28 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) [Plinth Plaster] 29 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) 30 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 31 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DRAIN 32 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the costof nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the approved make & colours) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 34 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. 35 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 36 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 37 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).warehouse 38 Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Two Coat) 39 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour. New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre(For Internal wall surface) 40 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 41 Making grooves 12mmwide x12mm deep in plaster of the walls or in ceiling vertically or horizontally as required 42 Making of draing along with apron 150 X 150 MM 43 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 44 Supply and fixing of flush Doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied 35 mm thick single leaves 45 Providing and fixing SS sliding door bolts ISI marked anodised transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm. 46 Providing and fixing SS tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm. 47 Providing and fixing SS handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm. 48 Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (SAL WOOD) 49 12 mm thick one side Pre-laminated particle board (decorative lamination on one side) for Door Chaukhat Paneling 50 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(Second class teak wood) 51 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges andscrews and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 52 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works(GATE)/OHT 53 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 54 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required diaand size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 55 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 56 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 57 (Fixing of Door, windows/ventilators chaukhats in position. Door 58 (b) Windows 59 (c) Clerestory window chowkhats 60 Float glass panes (4 mm thick glass pane (weight not less than 10kg/sqm). 61 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Threetrackthreepanelsslidingwindowwithtwoglazed &onewiremeshpanelswithAluminiumchannelforroller track,woolpile,nylonrollerswithSS304body. UsingR3serieswithframe(98mm&above)x (40mm&above)&bothglazedandflyscreen sash(30mm&above)x(55mm&above) withzincalloy(Zamak)powdercoatedhandle oneveryglazedpanelalongwithmulti-point lockingsystem.(Heightupto1.8m). 62 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangementsfor inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover 63 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture GATE 64 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 65 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/ sqm). 66 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 67 Providing & fixingAluminiumsliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm. 68 Providing and fixingAluminium. anodised towerbolts (barrel type) with necessary screws etc. complete. 250 mm x 10mm 69 (a) 200 mm x 10mm 70 Providing and fixinganodised handles with screws etc. complete (a) 125 mm. 71 Foundations, footings, bases of columns, etc. for mass concrete 72 Suspended floors, roofs, landings, balconies and access platform 73 Lintels, beams, plinth beams, girders, bressumers andcantilevers 74 Columns, Pillars, Piers, Abutments, Posts and Struts 75 Columns, Pillars, Piers, Abutments, Posts and Struts 76 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 77 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 78 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade pigment using white cement 79 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 80 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer 81 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizont al level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out asper specifications, drawings and as per directions of the engineer-in-charge.With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) 82 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish oftapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 83 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 84 Direction & Place identification Signs more then .90sqm size BordP/Erectung direction & Place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting the retro-reflective sheeting type-IV shall be lested for 3 year outdoor weathering. 85 Providing, fabricating and fixing/ erection of 4-5mm SS plate in approved shade at desired location as per approved drawing of SALE TAX OFFICE BUILDING GAURIPUR BAGPAT having Helvetica Font with 75 mm size Also including cost of providing and fixing of fasteners complete in all respects as per Engineer in charge 86 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller8 including making good the undulations etc. and re-rolling the subWC .g rade and disposal of surplus earthwith lead upto 50 metres. (DSR-16.1) 87 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin-chargeCement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer. (DSR 16.43.2) 88 Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade A sealing compound. (DSR- 16.46.1) 89 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge 90 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern 91 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 92 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 93 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid 94 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 95 Providingandfixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting andmaking good the walls where required : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 96 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mmbrass pillar taps, brass chain with rubber plug, 32mmbrass waste of standard pattern including cutting & making good the walls wherever required.a)White Vitreous China Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar taps 97 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 98 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 99 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 100 Range of four urinal basins with 10litre white P.V.C. automatic flushing cistern 101 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge 102 Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smooth Granite stone of approved shade 103 Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board 510x1040 mm bowl depth 250 mm 104 Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting CompleteFlexible Pipe 32mm Dia 105 40mm Dia 106 Bottle trap 31 mm single piece moulded with height of 270 mm, effProviding and fixing PTMT Bottle Trap for Wash basin and sink. ective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 107 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.(sink & urinal) 108 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 109 Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. 110 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 111 Providing and fixing toilet paper holder :C.P. brass 112 Providing and fixing soil, waste, vent pipesCentrifugally cast (spun) iron S&S pipe 100mm dia cast (spun) iron S&S pipe 113 Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100mm dia. Pipe 114 Providing and fixing heel rest sanitary bend, in Centrifugally cast (spun) iron pipe S&S 100mm 115 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.100X100X100mm Sand cast iron S&S as per IS : 3989 116 Providing and fixingPLAIN JUNCTIONof required degree 100X100X100mm Sand cast iron S&S as per IS : 3989 117 Providing and fixing terminal guard: 100mm Sand cast iron S&S as per IS - 3989 118 Providing and fixing collar. 100 mm Sand cast iron S&S as per IS - 3989 119 Providing and lead caulked joint 100 Dia 120 Providing and fixingcast iron trap of self cleansing design withcast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989 121 Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work100mm dia 122 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. 123 Providing & fixingPTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms 124 Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 125 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm nominal outer dia pipes 126 20 mm nominal outer dia pipes 127 25 mm nominal outer dia pipes 128 32 mm nominal outer dia pipes 129 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm nominal outer dia pipes 130 20 mm nominal outer dia pipes 131 Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work25 mm dia, nominal bore 132 40 mm dia, nominal bore 133 40 mm dia, nominal boreOHT 134 50 mm dia, nominal bore 135 65 mm dia, nominal bore 136 Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)25mm dia, nominal bore 137 32 mm dia, nominal bore 138 40 mm dia, nominal bore 139 65 mm dia, nominal bore 140 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore 141 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet100 mm diameter Providing and fixing brass stop cock of approved quality : 142 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 143 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)15 mm nominal outer dia pipes 144 20 mm nominal outer dia pipes 145 25 mm nominal outer dia pipes 146 32 mm nominal outer dia pipes 147 40 mm nominal outer dia pipes 148 65 mm nominal outer dia pipes 149 Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality25 mm dia, nominal bore 150 40 mm dia, nominal bore 151 50 mm dia, nominal bore 152 65 mm dia, nominal bore 153 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work 25 mm dia, nominal bore 154 40 mm dia, nominal bore 155 50 mm dia, nominal bore 156 65 mm dia, nominal bore 157 Providing and fixingG.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)15mm nominal bore 158 20mm nominal bore 159 25mm nominal bore 160 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore 161 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore 162 Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore 163 Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia 164 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 165 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 166 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete150 mm diameter 167 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :150 mm diameter S.W. pipe 168 Providing and fixing square-mouth S.W. gully trap grade A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than100x100 mm size P type 169 150x100 mm size P type 170 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :250 mm dia rcc pipe 171 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 gradeInside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 172 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 173 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 174 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 MM 175 75 MM 176 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 110 mm 177 75 mm dia 178 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.Coupler110 mm 179 Bend 87.5°110 mm bend 180 75 mm bend 181 Shoe plain 110 mm bend 182 75 mm bend 183 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 184 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 185 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar 186 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks 187 Providing and fixing C.I. tee at the inlet and outlet of septic tank. 188 Providing & fixing 75mm dia vent pipes. 189 Providing & fixing of 75mm dia cast iron terminal guard. 190 Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. 191 H.D. -20- Circular shape 560mm internal diameter 192 M.D. -2.5- Circular shape 450mm internal diameter 193 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 194 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 195 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 196 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 197 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 198 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 199 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 200 4 X 6 sq. mm + 2 X 6 sq. mm earth wire 201 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 202 Wiring for group controlled ( looped ) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 203 Supplying and drawingCo axial TV cable, RG-6 grade, 0.7 mm solid copper conductor, shieldedwith fine tinned copper braid and protected with PVCsheathin the existing surface/recessed steel/PVC conduit as required. 204 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 205 25 mm 206 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch 207 3 pin 5/6 A socket outlet 208 TV antenna socket outlet 209 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 210 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 211 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) 212 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 213 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 214 Supplyingandfixing3pin5Aceilingroseon the existing junction box/woodedn blockincluding connectionetc. as required. 215 LayingofonenumberPVCinsulatedandPVC sheathed/XLPEpowercableof1.1KVgradeof following size direct in ground including excavation,sandcushioning,protectivecoveringand refilling the trench etc. as required. Upto 35 sq. mm 216 Supplying&makingendterminationwithbrass compressionglandandaluminiumlugsforthe following size of PVC sheathed / XLPE aluminiumconductorcableof1.1KVgradeasrequired.2 X 10 sqmm. (19mm) 217 Providing,layingandfixingfollowingdiaG.I. pipe(mediumclass)ingroundcompletewithG.I. fittings including trenching (75 cm deep) andrefilling etc as required.50 mm Dia 218 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 219 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep 220 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed S teel/ PVC conduit as required. 1 run of cable 221 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. (for A.C. Point/MCB Point) 222 Supplying and fixing PVC batten/ angle holder including connections etc. as required. 223 Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door 224 6 way (4 + 18), Double door 225 12 way Bouble door G.Room 226 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door 227 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole. 228 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 229 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,30KA,FPMCCB 230 Supply and fixing of 40 Amp. FP MCB (10 KA) C Curve. CAT A 231 Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A 232 Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A 233 63 A 234 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 235 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 236 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 237 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 238 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness 239 300 mm width X 50 mm depth X 1.6 mm thickness 240 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 100 mm dia 241 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, ), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 242 Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following sizesize 25 sq mm x 3-1/2core 243 size 35 sq mm x 3-1/2core 244 size 185 sq mm x 3-1/2core 245 Supply& Erracetionof factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.Cubicletype switchboard shall be of cat A & B Only. CAT. B Cubicle TypeIncoming -400 Amp MCCB-1 No.Outgoing - 100 Amp 4P MCCB - 3 Nos. (for VTPN D.B. DBs)63 Amp 4P MCCB - 2 Nos. (or As per requirment directed by Project Manager.) Outdoor Fidder Pillar Panel : 246 400 Amp MCCB-1 No.Outgoing - 100 Amp 4P MCCB - 3 Nos. (for VTPN D.B. DBs)63 Amp 4P MCCB - 2 Nos. (or As per requirment directed by Project Manager.) Outdoor Fidder Pillar Panel :Incoming -400 Amp MCCB-1 No.Outgoing - 200 Amp 4P MCCB - 2 Nos. 100 Amp 4P MCCB - 1 Nos.63 Amp 4P MCCB - 1 Nos. (Spare)(or As per requirment directed by Project Manager.) 247 S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. 248 Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. 249 Supply of factory made 300mm sweep ventilating (Medium Heavy Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Double ball bearing /Copper motor /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 70/85 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 900/1400 RPM. Complete in all respect. 250 Supply & fixing of 400 mm sweep wall mounted (Light Duty) fan complete with Plastic Blade & Pull Cord (Adjustable upward and downward tilt mechanism /motor /capacitor etc.) Oscillation degree - 90, Power consumption : 60 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 1350 RPM. Complete in all respect. 251 Supply and fixing of Single light Wall Bracketon matching M.D.F.E.G. Board base etc. Decorative Light with 12 W LED Bulb Complete in all respect. CAT. - AAA 252 Supply and fixing of LED Tube Light fitting suitable for up to 1X22 Watt LED Tube Light on surface complete in all Respect . 253 Supply & fixing of recess mounting round 10 to 15 watt LED down Lighter complete in all respect. 254 Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter complete in all respect. 255 Supply and fixing of 1x36 to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect CAT. - AAA 256 Supply and fixing of 1x36 to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect CAT. - AAA 257 Supply & fixing of recess mounting round 1x6 to 8 watt LED Ceiling Lighte complete in all respect. 258 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.Make : Notofire/Honeywell/Tyco Two loop panel 259 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. Make : Notofire/Honeywell/Tyco 260 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.Make : Notofire/Honeywell/Tyco 261 Supplying, installation, testing & commissioning of addressable manual call point complete as required. Make : Notofire/Honeywell/Tyco 262 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. Make : Notofire/Honeywell/Tyco 263 Supplying, installation, testing & commissioning ofaddressable horn cum strobe complete as required.Make : Notofire/Honeywell/Tyco 264 Supplying, installation, testing & commissioning ofaddressable fire control module complete as required.Make : Notofire/Honeywell/Tyco 265 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 266 SITC of Singal Headed Hydrant Landing Valve comprising of 80 mm dia flanged Bend 63 mm dia, with cap and chain conforming to IS:5290(Make : Kartar/Newage/Minimax) 267 SITC of RRL Hose Pipe 63 mm dia × 15 Mtr. Long with GM Coupling conforming to IS : 636(Make - Kartar/Newage/Minimax) 268 SITC of Short Branch Pipe as per IS:903(Make : Kartar/Newage/Minimax) 269 SITC of Hose Cabinet Box of 18 SWG M.S.Sheet with glass to accommodate Hose Reel Drum with Ruber Pipe with Nozzle. 2 Nos. RRL Hose and 1 No. Branch Pipe with Nozzle (750 x 600 x250 mm Size) 270 Providing and fixingMS Pipes conforming to IS:1239 (Medium- B class) including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required, cutting holes and chases in brick or RCC walls and making good complete. (For Riser) Make : Jindal80mm dia 271 100mm dia 272 150mm dia 273 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required . (Make : Kartar/Newage/Minimax)Single headed Gunmetal 274 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. (Make : Kartar/Newage/Minimax) 80mm dia 275 100mm dia 276 150mm dia 277 Supply, installation, testing and commissioning of Manual Swing Type First aid Fire Hose Reel conforming to IS: 444 complete with all other necessary fixing accessories.(Make : Kartar/Newage/Minimax) 278 Supply of Fire Man Axe. 279 SITC of Air vessel made of 250 mm dia , 8 mm thick M.S. sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shed as required. 280 Supply, Installation, Testing & Commissioning of NRV complete with flanges, gasket and nut bolts. (Make : Kartar/Newage/Minimax) 100 mm 281 SITC of Butterfly Valve complete with all respect.(Make : Kartar/Newage/Minimax) 100 mm 282 Supply, Installation, Testing & Commissioning of Pressure Gauge with gauge cock 283 Supply, fixing , testing & commissioning of electrical motor driven fire pump suitable for automatic operation consisting of following : (Terrace Pump)(Make : Kirloskar/Mather+Platt)(a) Horozontally mounted, split casing, Centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class GI pipe and control valves for proper completion of work.The pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.The pump shall be provided with Mechanical seals. The impeller shall be enclosed type and accurately blanced dynamically.The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel.(b) Squirrel cage, TEFC induction motor suitable for 415 V, 3 phase having IP 55 protection and class B insulation for the above pump and flexible coupling with the pump.The motor shall b rated for continuous duty and shall have HP rating necessary to drive th pump at 150% of its rated discharge at 65% of rated head.© Common bed plate of fabricated mild steel channel or cast iron type.(d) Suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts, anti vibration pads, washers etc.(e) Pressure switch for automatic operation of motor including necessary wiring upto control panel.(f) Electrical Control panel with starter, 3 Pole motor protection category current limiting type MCCB, indicating light, ammeter, voltmeter, selector switches, CTs protective fuses, single phasing protection, dry suction cut off etc as requrd as per standard details.Discharge :450 liter per minuteHead : 35 meter 284 Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.Make: Firejeet/Minimax 285 Supply & fixing of CO2 type fire extinguisher,6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.Make: Firejeet/Minimax 286 Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. Per liters capcity. 287 Supply and fixing of 16 mtr High mast Shaft of approved make with rising system, hot dip Galvanized inside & outside, having pole sheet thickness 3 mm. Top dia minimum 150 mm, bottom dia minimum 360 mm, base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &.having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes,1.5 HP Power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch. Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers, anchor plates etc.Complete in all respect as per direction and satisfaction to the Engineer-in-charge. 288 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in allrespect. complete in all respect. CAT AAA 289 Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Following sizesize 10sq mm x 2 core 290 size 16 sq mm x 4 core 291 size 10 sq mm x 2core 292 S/F of 6mtr G.I Octagonal pole of approved make (Top dia 70 mm, Bottem dia 130 mm and Base plate 12mm thick ) having 3mm thikness with single arm bracket 1mtr length in 1:2:4 R.C.C foundationbolt including the cost of foudation ,excavation & back filling & required TNP Complete in all respect. 293 S/F of LED street light Fitting having Die cast aluminium Body & diffuser with driver set suitable for 75 to 90 watt confirriming to IP 66 & above Protection complete in all respect 294 S/F following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contractors HRC fuses, isolating switch Metreing instrument and instrument box with CTS etc. in case of TPN complete in all respects including the cost of fixing materials, labour T & P etc. as per direction and satisfaction to the E/I. 15 A SPN 295 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 296 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 297 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 298 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 100 mm dia 299 Supply& Erracetionof factory fabricated & wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cable entreis Electricalcontrol panel with TPN MCCBs (Four Pole 36 KA with thermal magnaticrelease)SwitchesComplete and instrumentchamber etc.complete in all respects. The instrumentchamber shall be separate and shall comprise of flushtype digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for differentreadings, instrumentfuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininumbusbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable sidecovers and shall be suitable for extension on the sides. The MCCBs shallbe completewith suitablecable end boxes,compression glands and indicating lamp on incoming etc.The Job includesthe grountingof the board as per directions of Engineer-incharge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shallbe fabricatedwithCRCA sheet with a minimumthicknessof 1.6mm/2mm.Cubicletype switchboard shallbe of cat A & B Only.Incoming :100 Amp MCCB -1 No.Outgoing :63 Amp. MCCB - 1 No. & 32 Amp. MCCB-2 Nos.Cat. B. Pannel Cubicle Type 300 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole. 301 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction ofEngineer-in-charge. 150 mm nominal size dia 302 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 303 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 304 Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge. 305 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge. 306 Constructing brick masonry INSPECTION chamber 60x60x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame LIGHT WEIGHT complete asperdesign. With FPS bricks60x60x60 cm inside 307 Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.up to 1.50 m depthPipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia. 308 Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter 309 Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameterS.W. Pipe 310 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge. 300 dia & Upto 90 metre depth 311 300 dia & Beyond 90 metre & upto 150 metre depth 312 Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200mm nominal size dia 313 Supplying, assembling, lowering and fixing in vertical position in bore wellunplasticized PVC medium well screen (RMS) pipes with ribs, conformingto IS: 12818, including hire & labour charges, fittings & accessories etc.all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. 314 Providing and lowering G.I. pipes complete with G.I. fittings including trenchingand refilling etc. 65 mm dia nominal bore (Column pipe). 315 Supplying, filling, spreading & leveling pea gravel[(3.14/4)*(.3*.3-.2*.2)*140)]=5.50 316 Charges for development by 150 PSI Compressor Per Hr. 317 SITC of Pumping plant including starter, control Panal, cable, complete in all respect with all required material T&P labour etc. [7.50H.P. ] Crompton/K.S.B., Oswal make 318 Supply and wiring of 3 number 6 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 40mm dia heavy guage rigid steel conduit on surface, with two number 10 SWG copper earth continuity wire etc, complete in all respect From Transformer to Panel 319 Water Supply of tanker 5000 litre capacity of boring. 320 S/F %0 KVA DG Set

BRR:8660463 Urban Non Dalit Population Improvement Scheme Under District Annual Plan 2025 26 Construction Of Cc Road Cc Drain And Paver Block In Ward No 6 Svm Colony Of Municipal Council Area

BRR:8660298 Tender for Construction of Paver Block Road In Ambedkar Nagar At Village Wadali Tq S Raja Dist Buldhana (As Per Estimate Attachment)

BRR:8660267 Tender for Construction Of Paver Block Road For Sant Gajanan Maharaj Sansthan At. Koyali Bk Tq.Risod, Dist. Washim Under Tirthkshetra Vikas Yojana 2025-26

BRR:8660243 Tender For Repair/Maintenance Of Sewage Line, Drain And Foot Path For Salaria Officers Enclave Under Ge (West) Delhi Cantt-10; 1 Cleaning ofEWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC/HDPE Pipes all types top to bottom including junctions etc,Cleaning of sewage line upto GTin the area of Salaria Officers enclave (Md Accn including multistory bldg). complete all as specifiedand as directed. 2 Cleaning of GTs in the area of Salaria Officers enclave (Md Accn) complete all as specifiedand as directed. 3 Cleaning of Manhole upto depth of1.50 mtr and any size of MH in the area of Salaria Officers enclave (Md Accn) and taking out sludge and depositing complete all as specifiedand as directed. 4 Cleaning of Sewage line from GT to Ist Manhole in the area of Salaria Officers enclave (Md Accn)complete all as specifiedand as directed. Note-cleaning of sewage line daimeter upto 100mm to300mm complete all as specifiedand as directed. 5 Cleaning of Sewage line 0.00mtr to 30.00mtr and onwards in lengthin the area of Salaria Officers enclave (Md Accn)complete all as directed and as specified. (Note :- This item will be measured if length not exceed from 30.00mtr. and cleaning of sewage line daimeter upto 100mm to300mm complete all as specifiedand as directed. 6 Note :-For execution of Item No. 01 to 05 above :-i) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding sunday & gazetted holiday, commencing from date and time as notified in the complaint slip failing which a penalty of @ Rs.120/-per complaint per day (08 hrs) shall be levied imposed on the contractor and necessary recovery shall be made from contractors dues on this account.ii) Contractor or his representative will report daily at 0900 hrs at Salaria Officer enclave Complaint Cell for collection of complaints from the concerned JEs In charge, in case after checking & attending the defects, it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of Engineer in charge by the contractor/ his rep immediately. If Engineer in charge is satisfied with contractors view, no recovery will be made on this account. However complaints related to sewage shall also be attended on next day whether it is Sunday or Gazetted Holidays and nothing extra shall be payble to contractor on this account.iii) Contractor shall arrange suitable T&P (such as KHAPACHI, GI wire, PHAWADA, Bucket, Spikes,die set,sewage pump die set (1/2 to 1) washers of all size, safeda, thread (soot), M-seal, screws, nails etc including necessary form work/scaffolding and safety measure complete all as specified and directed.iv) The above all aspects shall be deemed to be included in the quoted rate of the respective item and Nothing extra shall be payble to contractor on this account. 7 M&L for Cleaning of existing open/covered drain of any width and any depth incldg removal and refixing of drain covers, removal ofloose soil, cement, mud, garbage, debris, sludge (liquid/Dry), vegitation,tree roots etc in any position manually or machnically outside MOD land complete all as specified and directed by engr-in-charge. 8 M&L for Cleaning of existing covered rain water harvesting pit of any size and any depth incldgremoval ofloose soil,cement,debris, mud, garbage, debries, sludge (liquid/Dry), vegitation,tree roots etc upto moorum filling in any position manually or machnically outside MOD land complete all as specified and directed by engr-in-charge.Note:- For payment, only quantity of debris/dry sludge removed from the pit shall be measured. 9 M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering,cutting out existing benchingfor and forming branch channel (1/2 or 3/4section) in cement concrete1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified. 10 Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by mechanical scrappers etc and disposal off the same out side the defence areaall as specified and directed by Engr-in-Charge. 11 M&L for cleaning of sewage line with super sucker machine with 3000 It sludge slurry capacity & jetting machine ( For 08 Hrs) and including high pressure water jet to break up blokages,dislodge debries,loosen silt and sediment in the sewer line and suck up the dislodged debries and other waste material and pumping out of MoD land and also provide required staff and appliances which are essential for entire removal process, all as specified and directed by Engr-in-chargeNOTE: - Once cleared will be maintained through out the period of the contract for free flow. If there is any blockage during the period of the contract, the same will be cleared without any extra cost by the contractor 12 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) Complete all as specified and directed by Engineer-in-Charge. 13 S&F 110mm dia PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors complete all as specifiedand as directed. 14 S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm borecomplete all as specifiedand as directed. 15 S & F PVC bends 110 mm size diminishing pieces or tapers (larger bore measured) with oval access door complete all as specifiedand as directed. 16 S & F PVC bends 75 mm size diminishing pieces or tapers (larger bore measured) with oval access door complete all as specifiedand as directed. 17 Demolition of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris outside MOD land complete all as specifiedand as directed. 18 M&L for brick workwith sub class B bricks straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed. 19 M&L for as per S.No.18 above here in before but except bricks complete all as specifiedand as directed. 20 S&F in replacement of factory made SFRC drain/Mainhole cover medium duty M-25 grde 75mm thick size not exc .75sqm each complete all as specified and directed. 21 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete all as specified & directed. 22 Returning filling in soft/loose soil incl spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified & directed. 23 Removing of surplus soil beyond MOD land not less than 500 mtr from MOD land complete all as specifiedand as directed. 24 Demolition and breaking of 150 mm dia sewage/drain pipe (salt glazed where AC or reinforced concrete) set in cement mortar complete all as specified & directed. 25 All as per item no 24 above but 200 mm dia. 26 M&L for cement concrete 1:4:8 type D-2 using 40mm graded agg incl packing under and haunching against sides of 150mm dia (Internal dia) pipe afterthey are laid and tested complete all as specified (Thickness of concrete bed 150mm) complete all as specified & directed. 27 All as per itemno 26 above but 200 mm dia. 28 M&L for Reinforced concrete pipeclass NP2, 150mm dia laid in trenches & jointed in cement mortar (1:2) with collars complete all as specified and directed. 29 M&L for Reinforced concrete pipeclass NP2, 200mm dia laid in trenches & jointed in cement mortar (1:2) with collars complete all as specified and directed. 30 Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. 31 M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth using extra cement with 1:3 admixed with appropriate integral water proofing compound complete all as specified and directed.(Note : Supply only WPC shall be measured and paid separately) 32 Supply only Integral waterproofing compound (ISI marked) 33 M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping, kerbs, bed plates incl weathering slightly rounded or chamfered angle and throating complete all as specified and directed. 34 M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains finishing the exposed surfaces of concrete to fair and even including demolitions complete all as specified and directed. 35 Extra for forming fair finished drain or channel 80 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specifiedand as directed. 36 Cutting and cleaning away all grass vegetation, sapling, shrubs, brushwood, undergrowth, roots and trees n. exc 30 cm girth from roof terrace, walls parapet etc & pouring acid over affected areas n. exc. 1 Sqm and making good the disturbed portion in CM 1:3 incl removal of rubbish up to a distance of 50 m out side the periphery of area under clearence complete all as specified and directed. 37 M&L for Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specifiedand as directed. 38 M/L for Hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface complete all as specifiedand as directed. 39 M&L for 100mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base complete all as specifiedand as directed. 40 M&LforProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed. 41 M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specifiedand as directed. 42 Demolition of cement concrete(unreinforced) of any description andin any position not otherwise specifically provided for, complete all as specified and directed. 43 S&F Endura colours paving tiles 300mm X 300mm x 9-10mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors/footpath over and including 15mm thick screed bed in CM 1:4 complete all as specifiedand as directed.

BRR:8660242 Tender For Special Rep To Certain Internal Roads Of 618 Eme Bn And Internal And External Circular Road Of Aps At Kota Mil Station.; 1 Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and not exc 50 mm deep and removal of rubbish material outside MoD Landcomplete all as specified and directed. 2 M&L for repair to potholes depth exc 30mm and area not exc 1 Sqmeach including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc; cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, using paving bitumen of grade VG-30 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), complete all as specified and directed. 3 M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)paving bitumen any penetration binder content of 4% by weight of total mix, complete all as specified and directed. 4 M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and directed. 5 M&L for applying evenly a priming/tack coat with cataionic bitumen emulsion of RS-1 Grade as per IS :8887 using emulsionpressure distribution on the bituminous surface @ 3 kg per 10 sqm, complete all as specified and directed. 6 M&L for applying evenly a priming/tack coat with cataionic bitumen emulsion of RS-1 Grade as per IS :8887 using emulsionpressure distribution on the bituminous surface @ 4 kg per 10 sqm, complete all as specified and directed. 7 M&L forBituminous premixed Semi Dense Asphaltic Concrete 30 mm thick consolidated thickness with binder content of paving bitumen (VG-30) @ 5.5 % by weight of total mix including supply of filler as per design mix, spread using Mechanical sensor paver rolled and compacted with 8 to 12 ton power road roller to a required camber and gradient complete all as specified and directed. Note :(i)Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver.(ii)Material shall be brought at sitefrom approved / authorised Hot Mixplant at any distance. Hot mix plant shall be got approved from GE. 8 Material and labourfor preparing concrete/bituminous surfaces and painting lines, dashes (continuous/ unintrrupted), arrows, letters etc exceeding 10 cm width with hot applied thermo plastic road marking materials not less than 5 Kg per 10 Sqm all as specified in clause 803.4 of MOSRT and H Specification, white or golden yellow (IS colour No. 356) over a coat of primer complete all using road painting machine complete all as specified and directed. 9 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 10 Supply and fixing in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed 11 Demolition of un-reinforced cement concrete in ground floor and pavings n exc 15 cm thick (below or above ground level) and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed 12 M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling & mass concrete complete all as specified and directed 13 M&L for Machine pressed precast concrete interlocking paver block glossy finish, any shape and size with grey cement & no pigment confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade complete all as specified and directed. 14 M&L forSand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. 15 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed. 16 M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud , or water scoring sunken surfaces in roads cutting around edges to at least 25 mm in depath making good by applying tack coat at 5 kg per 10 sq m putting in pre-mixed bituminous macadam well rammed (including supply of premixed macadam, binder and chipping), depth of potholes not exc 30 mm complete all as specified and directed. 17 M&L for prepaing existing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with machenical blower and gunny bags to remove all loose dirt etc and applying evenly tack coatwith bituminious primer using paving bitumen (VG-30) grade@ 5 kg/10 Sqm on road surface by mechanical sprayer complete all as specified and directed. 18 S&F in repair metal tubular Delineator made out of ABS round body fitted with 02 Nos 65 mm dia, highly reflective reflector made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands ofred, yellow, white in colour radium tape of 25 mm wide strips with anti theft steel net including embedding in PCC (1:2:4) block of size 150 mm x 150 mm x 300 mmcomplete all as specified and directed. 19 S&F in repair Bi-Directional Reflective type Road cat eye, illuminated yellow rectangular/square shape at the centre size (100 x 115mm/100 x 100mm),made out of ThermoplacticBody fixed on road with bitumen adhensive as per manufactureers instructions having abrasion resistance Ceramic coating and reflective surface complete all as specified and directed.

BRR:8660227 Tender For Addition / Alternation Of Sewage Line And Provision Of Stp Of Capacity 300 Kld At Dmr At Acc And S Ahilyanagar Under Ge(N) Ahilyanagar.; 1 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft / loose soil 2 Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point 3 Excavation over areas not exceeding 1.5 M deep and getting out in soft / loose Soil 4 Excavation over areasexceeding 1.5 M deep and n.exc 3.00M deep and getting out in hard / dense Soil 5 Excavation over areas exceeding 3.00M andnot exceeding 4.50M deep and getting out in hard / dense Soil 6 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft / loose soil. 7 Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil. 8 Excavation in trenches n.exc 1.5M wide and N.exc 3.0 M in depth for foundation etc or for manholes n.exc 10 Sqm on planand getting out in hard/dense soil all as specified and directed by engineer-in-charge 9 Excavation in trenches n.exc 1.5M wide and exc 3.0 M and n.exc 4.50 M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and getting out in hard/dense soil all as specified and directed by engineer-in-charge 10 M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all specified and as directed. 11 M&L for Hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete. 12 M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete. 13 M& L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished complete all as specified and directed . 14 M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter 15 M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc 16 M&L forFormwork to sides of pillars, posts, struts, piers,columns and stanchions 17 M&L for Flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar worknot exce 200 mm thick. 18 M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. 19 M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edge 20 M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed . 21 M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed . 22 M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Columns,pillars,piers,posts and struts 23 M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses 24 M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like 25 M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate chajja complete all as specified and directed . 26 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed . 27 M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed . 28 M&L for Mild steel TMT bars in stirrups, spacers and bindersfor columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed . 29 M&L for type C1 1:3:6 20mm graded aggregate Pre-cast cement concrete block set in CM 1:6 masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete 30 M&L forBrickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed . 31 M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed . 32 M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished even and smooth without using extra cement with WPC.Note:- WPC shall be measured & paid seperately. 33 M&L for preparingthe newly plastered or unplastered surfaces and applying one coat of alkali resistance priming paint over two coats of cement based paint . 34 M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished even and smooth without using extra cement with WPC.Note:- WPC shall be measured & paid seperately. 35 Supply only Integral water proofing compound 36 M&L for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed. 37 M & L applying two coats of OBD over a coat of primer on newly plastered wall surfaces and ceiling over 2 coat of wall care putty preparation of surfaces all as specified and as directed. 38 M&L for preparingthe newly plastered or unplastered surfaces and applying one coat of alkali resistance priming paint over two coats of cement based paint . 39 M&L for preparing new surfaces of wallsand applying twocoat of white wash. 40 M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft and loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, removing surplus material n.exc 50 mtr and making good distrubed surface etc complete all as specified and directed by Engineer-in-Charge 41 M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-in-Charge 42 S&F for Mild steel bolts purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end tobefittedwith washers and one hexagonal or square nut. exc 30cm long Dia of neck in not exceeding 12 mmcomplete all as specified and directed by Engineer-in-Charge 43 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and directed by Engineer-in-Charge 44 Supply only chain link fencing made cut from GI wire 10 gauge and 50 mm apperture weight not less than 3 kg / Sqm etc complete all as specified and directed by Engineer-in-Charge 45 Supply and fix 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking binding cutting etc complete all as specified and directed by Engineer-in-Charge 46 M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge. 47 M&L for two coats of synthetic enamel paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge 48 S& F forGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) 49 M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe - 410-W (Gde E - 250 quality A) complete all as specified and as directed. 50 S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcconfirming to Fe 410 - W (Gde E-250)quality-A, 51 M&L 75 mm thick cement concrete type C-2, 1:3:6 (Using 40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including joints and bitumen filling complete all as spd and directed. 52 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils. 53 M & L for Removing Excavated soils exc 250.00 m and not exceeding 500 m and depositing where directed. 54 M&L for rendering 10 mm thick in CM (1:4) on roof slab top finished even and fair without using extra cement complete all as specified. 55 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-(i) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampnessall as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. hereinafter of pressuregrouting shall be operated at the required locations). (ii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm.(iii) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq. M (iv) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures (v) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm per coat over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed 56 M&L 75 mm thick cement concrete type C-2, 1:3:6 (Using 40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including joints and bitumen filling complete all as spd and directed. 57 M&L 100mm thick Plain Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) floor finish and including 5mm thick of glass strip of partion complete all as specified and as directed. 58 S&F for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular)each tile 300 x 300mm / 400 x 400 mmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by Enggineer-in-charge. 59 M&L for Glazed ceramic coloured in vertical surface 350x 250x 7 to 8 mm / 450X 350X 7to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado all as specified and as directed. 60 M&L for 18 to 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including moulding or roundingof edges, machine polishing to edge to give high gloss finish complete all as specified. 61 S&F for poweder coated Aluminium framed windows / doors / ventilators any pattern, fixed/side hung/silding using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, mortice lock, glazing all as specified Note-: glazing shall be measured and paid separatly 62 S&F sheet glass ordinary quality 4.8 mm thick not exceeding 0.5 sqm in each pane all as specified and as directed. 63 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed. 64 S & F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified. 65 S & F for Mild steel FI as in hold fasts and similar small articles fixed to chowkats, conforming Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge. 66 S & F 35mm thick 2nd class hard wood (kail) plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified. 67 M&L 30mm thick second class hard wood (Kail) Glazed and Skelton shutters,openrebated and prepared to receive glass, gauge etc ( with out sash bars)edges of framingplain, chamferedor rounded fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete, all asspecified and directed. 68 M&L mild steel frame work such as grills with ends of barshouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0and taking down old one. 69 M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Enggineer-in-charge. 70 S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) 71 S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010 72 S&F butt hinge, mild steel 100mm long all as specified and as directed. 73 S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed. 74 S&F extruded aluminium alloy handle fabricated type anodised 150 mm long 75 S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 250 mm long and fixed all as specified and as directed. 76 S & F in repairvitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errectingon existing CI brackets including taking down old one alll as specified and as directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor. Make of Cera Code : S2040121 or other equvelent in approved make. 77 S&F in Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe waste pipe completeall as specified and as directed. 78 S&F 1000 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top)hoisted and fixed in position including brass gate valve crutch or butterfly handle, polythene float and flynut complete, screwed for iron pipe or PVC ferrule and GI suitable nipple at outlet all as specified and directed. 79 S&F steel water tubes, `meediumgrade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm bore. 80 S&F steel water tubes, `meediumgrade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of20 mm bore. 81 S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated). 82 S&F in repair 15mm dia chromium plated Fancy Bib taps, cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 83 S&F in 15 mm bore Fancy typePillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed 84 S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm dia PVC pipe for connect to wc complete all as specified and as directed 85 S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest P or S trap, completeall as specified and as directed.Make of Cera or others equvelent in parryware and Hindware 86 S&F PVC connections 15mm size with PTMT nuts of length 450mm 87 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors. 88 S & F 110 mm bore PVC (SWR) bends of any radius. 89 S & F 110 mm bore PVC (SWR) bends of any radius with access door. 90 S&F for PVC gully trap 125 / 110 mm , setting and jointing with solvent cement 91 S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches. 92 S&F PVC (SWR)bendsany radius 75mm bore 93 S & F 75 mm bore PVC (SWR) bends of any radius with access door. 94 S & F 75 mm bore PVC (SWR) Vent Cowl 95 S&F mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 96 M&L for Providing and laying 60mm thick factory made glossy finished chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand (sand cushion), compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directedby Engineer-in-Charge. 97 M&L for Providing and laying at or near ground level factory made coloured kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete 98 M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) , plinth courses,copings, bed plates,water troughs, hanchings and the like including weathering, slightly rounded or chamfered angles and throating as directed. 99 M & L forprecast cement concrete Type B1 1:2:4(20 mm graded aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facesand setting in mortar 1:4 100 M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. 101 M & L RCCpipe NP2 150 mm dialaid in trenches and jointed as specified. 102 S & F RCC Class NP 2, 200 mm bore pipes laid and jointed complete with collars. 103 S & F RCC Class NP 2, 300 mm bore pipes laid and jointed complete with collars. 104 M & L cement concrete 1:3:6type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm dia bore complete all as specified and as directed. 105 M & L cement concrete 1:3:6type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200 mm dia bore complete all as specified and as directed. 106 M & L cement concrete 1:3:6type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 300 mm dia bore complete all as specified and as directed. 107 M&L for Cuttingintoexistingmanholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as requiredcomplete all as specified and as directed. 108 Demolition of cement concrete (unreinforced) of any description, in any position, from the foundation of manhole including benching etc complete all as specified. 109 Demolition of Reinforced cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed. 110 Demolition and breaking up drain pipes 150 mm dia(Salt glazed ware, AC or Reinforced concrete) set in cement mortar 111 .-ditto- all as per ser item no 110 above but 200 mm bore pipe 112 .-ditto- all as per ser item no 110 above but 300 mm bore pipe 113 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc. 114 M&L for providing, laying, spreading in layers Bio Media of specific size as a Bio- media filter material as specified and directed by technology provider including all labour, material, loading, unloading, transportation, upto 15 Km. lead, placing the bio media in Bio Mound including all taxes and duties such as royalty…etc. complete all as specified and directed by Engineer-in- charge. 115 M&L for Providing and fixing Jute Kanthan (Tarat) sceen to the scaffolding for external guniting as directed including removing the work is over etc.complete all as specified and directed by Engineer-in- charge. 116 M&L for Plantation work above Bio-Mounds complete all as specified and directed by Engineer-in- charge. 117 Supply and fix Non-clogging Sewage Submersible pumpsets of min flow 12.5 Cum/hr at 9.0 Mt head capacity-02 Nos (1 Working+ 1 Stand by) in Tube Settler Tank with float switch, cabling, fittings & installation complete all as specified and directed by Engineer-in- charge. 118 Supply and fix Non-clogging Sewage Submersible pumpsets of min flow 12.5 Cum/hr at 9.0 Mt head capacity-02 Nos (1 Working+ 1 Stand by) in Equalisation Tank with float switch, cabling, fittings & installation complete all as specified and directed by Engineer-in- charge. 119 Supply and fix Non-clogging Sewage Submersible pumpsets of min flow 12.5 Cum/hr at 9.0 Mt head capacity-02 Nos (1 Working+ 1 Stand by) in Collection Tank -1 with float switch, cabling, fittings & installation complete all as specified and directed by Engineer-in- charge. 120 Supply and fix Non-clogging Sewage Submersible pumpsets of min flow 12.5 Cum/hr at 9.0 Mt head capacity-02 Nos (1 Working+ 1 Stand by) in Collection Tank-2 with float switch, cabling, fittings & installation complete all as specified and directed by Engineer-in- charge. 121 M&L for installation of UPVC Distributary System above BioMounds and Pumping Set to Header Lines complete all as specified and directed by Engineer-in- charge. 122 Supply and Installation of Tube Setller Packing System complete all as specified and directed by Engineer-in- charge. 123 Supply and Installation of Fine Screen complete all as specified and directed by Engineer-in- charge. 124 Supply and Installation of Mechanical Flow Meter 2inch complete all as specified and directed by Engineer-in- charge. 125 Supply and Installation of Control Panel System complete with proper connection with all Electrical equipment and make it functional complete all as specified and directed by Engineer-in- charge. 126 Supply and Installation of CAMUS Cultures and Catalyst; Patent No 414339 METROL Process (Mite Ecology for Treatment of Organic Liquids) complete all as specified and directed by Engineer-in- charge. 127 Design and Project Management Charges• Process Design (Sizing and Specifications) :- 1 Job• GA Drawings as per site :- 1 Job• Bio Media Identification, Testing and Certification :- 1 Job• Routine Supervision during Civil, Media Filling and Installation of Electromechanical Items :- 1 Job• Commissioning & 30 days O&M :- 1 JobNotes : Maintenance & Operation during the Defect Liablity Period ((DLP) of two years deemed to be included in the Quoted Rates. 128 Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure, AMFII Contactor Base control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity 58.5 KVA complete all as specified and directed by Engineer-in- charge.Note: PCC platform and shed for Generator set of suitable size are included in above quoted rate. 129 Supply and layingLT UGcable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured , electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of size 70 sqmm 3.5 core.Note : Excavation & Earthwork shall be measured & paid seprately under the relevent item of this Schedule. 130 Supply & laying of DWC HDPE pipe ISI mark of outer dia 50 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable icluding coupler and bends etc complete all as specified and directed by Engineer-in-ChargeMake :Supreme / Infra / Astral/Prince/jain irrigation 131 M&L forearthing with galvanised steel earth plate electrode of size 600 x 600 x6mm thick buried vertically in ground not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level and connected to GI strip 32x6 mmby means of nuts, bolts and washers and encased in and including 15 dia GI medium grade pipe upt 2.4 mtr height form ground level fixed by MS flat iron clamp 40mm x 5mm with nut, bolt and washers, GI strip fixed to base along pole and connected to over head line for providing earthing to HT pole/feeder AB switch LA complete with charcoal dust, salt packed around plate 150 mm thick including watering GI pipe, medium grade 40 mm dia with blanking cap 1.5 mtr long fixed to funnel with wiremesh complete with PCC chamber and RCC chamber over all as per Electrical Plate No 3 of SSR Part I - 2009 incl excavation and earth work in any type of starta and testing on compeltion. 132 Supply, Installing, commissioning and testingin replacement LT panel board, factory made, out door, cubical type , cubical type, vermin proof, dust proof, water proof made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and angle iron frame of size 50x50x5mm inside depth not less than 50 cm and size suitable to accommodate the following accessories, with insulated alluminium busbar 300 Amps capacity, 3 phase, 4 wire system, both sides openable (front and back), locking arrangement with CPRI approved , including cable trench duly painted with power coated with RAL 7032 internally and externally connecting with existing cable with lugs including internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 100 Amp four polewith Breaking Cap 36 KA-01 No(Incoming)(b) Change over Switch 100 Amps on Load - 01 Nos(c) MCCB, 100 Amps,with breaking cap 25KA- 02 Nos (For Out Going)(d)Multifunction meter digital type)-01 No(e) Phase indication lamps LED type with holder-01 Set(Set of Three) 133 Cutting to existing CI/GI pipe line upto 80 /50/25/20 mm dia for taking connection up to 25 mm dia GI pipe including insertion of CI /GITeecomplete all as specified and directed including Exc & earth Work 134 Supply and lay in trenches/or on wallmedium grade steel water tubing of25 mmbore galvanised with all fittings and joints etc complete for following size :- 135 Supply and fixgun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 25 mm bore.

BRR:8660185 Tender For providing Of Office Space And Allied Infra For Qmg Branch At Bb Cantt, Srinagar - 1 Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soil,complete allas specified and directed. 2 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth forfoundation, etc. or for shafts, wells, cesspits, manholes, pier holes, or for laying of cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outt in soft/loose soil, complete allas specified and directed. 3 M & L for plain cement concrete1 : 4 : 8Type D2using 40 mm graded crushed stone aggregsate, as in foundation, filling and mass concrete, complete allas specified and directed. 4 Form work to sides of concrete foundation, footings plinth beam etc., vertical or to batter, complete allas specified and directed. 5 M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate) as in foundationfootings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete, complete allas specified and directed. 6 Form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc, fair finished surface,complete allas specified and directed. 7 M&L reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate,as in beams, cantilevers , bressummers, lintels over 1.5 m span complete allas specified and directed. 8 Form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping).For fair finished surface n.exc 200 mm thick complete allas specified and directed. 9 M & Lfor reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate as in columns pillers, piers, posts and struts complete allas specified and directed. 10 Form work to sides of pillars, posts, struts, piers, columns, fair finished surfacecomplete allas specified and directed. 11 M & Lfor reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate,as in slabs supported on walls beam and colums in floors, roofs, landing, deck slabs and shelves and the like complete allas specified and directed. 12 S & FTMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia,complete allas specified and directed. 13 S & FTMT steel bars 5 to 10 mm dia in stirrups, spacers and binders and binding with and including MS wire annealed not less than 0.9 mm dia, complete allas specified and directed. 14 Returning, filling in, including spreading levelling, watering and well ramming in layersnexc25 cm in soft/loose soil, complete allas specified and directed. 15 M&L Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point,complete allas specified and directed. 16 M & Lfor brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built incement mortor1 : 6, complete allas specified and directed. 17 M & L brick work with sub class B bricks straight or curved on plan to anyradius built in cement mortor 1 : 4 in half brick thick walls,complete allas specified and directed. 18 M & L for 20mm thick Damp proof coursein cement mortor 1:2 to horizontal or vertical surfaces including necessary formwork, complete allas specified and directed. 19 Supply only Integral waterproofing compound,complete allas specified and directed. 20 M & L for Sand filling under floors or in foundations including watering and consolidation,complete all as specified and directed. 21 M & L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed. 22 M & L for 75 mm thick plain cement concrete 1:4:8 Type D2 ( using 40 mm graded crushed stone aggregate) as in sub base to floors, complete all as specified and directed. 23 M&L for 25 mm thickplain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floors finished even and fair, complete allas specified and directed. 24 M&L for Virified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles exceeding 0.42 sqm and not exceeding 1.00sqm, in floors etc. set and jointed inneat cement slurry and pointed incement to match white or colouredover and including 15mm thick screed bed or bedding layerin cement mortar 1:4 ,complete all as specified and directed 25 M&L Vitrified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dados, walls, vertical surfaces etc. set and jointed inneat cement slurry and pointed incement to match white or colouredover and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed. 26 M&L for Non - skid Ceramic colourtiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick screed bed or bedding layer in cement mortar 1:4 ,complete all as specified and directed 27 M&L Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X350X 7mm thick, as in skirting, dados, walls, vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed. 28 M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Gde Fe 410-W (Gde- E-250) Qty-A,complete all as specified and directed. 29 S & F Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachmentof Gde Fe 410-W (Gde- E-250) Qty-A,complete all as specified and directed. 30 S & F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwewd both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 15cm and n exc 22.5cm long, complete all as specified and directed. 31 S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 32 Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 33 M&L for 1st class softwood (Australlian wood) as per J& K local practicepanelling 10 mm thick including 9 mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed, complete all as specified and directed 34 M&L for false ceiling,pattern wooden like (khatamband pattern) as per J & K local practicedesign as approved by GE with ornamental wood work made out of ornamentalwood pattern including 12 mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats) and fixed, complete all as specified and as directed 35 S&F 6MM Tthick Non asbestos fibre cement designer board /pre Laminated self embossed texture designer board E-Board classic size 600x600 m , HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI Frame work for Seamless ceiling size 600mmx600mm with main runner 38x24x0.9mm thick cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hanger 1200mm centre to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip complete as per manufacturers instructions, complete allas specified and directed. 36 S&F 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in eavs board/ wall boarding etc.,complete all as specified and directed. 37 M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out uing extra cement,complete all as specified and directed. 38 M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out uing extra cement, complete all as specified and directed. 39 M&L for rendering 5mm thick in cement mortar (1:3) & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab complete all as specified and directed. 40 M & L for preparing surface of newly plasteredwalls with 3mm thick wall care putty and applying two coats of Apex (ultima) paint over a coat of primer, complete all as specified and directed. 41 M & L for preparing surface of newly plasteredwalls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering,complete all as specified and directed. 42 M & Lfor 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,complete all as specified and directed. 43 S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereerscomplete all as specified and directed.. 44 S & F aluminium powder coated ventilators made of thefollowing specifications :-(Net external size of ventilator shall be measured.Following items are included in this unit rate.)(a)Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick.(b)Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber).(c)Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips.(d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel.(e) Repair to the jamb, cills and all sides around the window is incl in unit rate.The repair finishes to match the existing surfaces like tiles, plastering etc. 45 S & F aluminium powder coated sliding window made of thefollowing specifications :-(Net external size of window shall be measured.Following items are included in this unit rate.)(a)Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick.(b)Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm.(c)Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading and locking clips arrangement.(d)Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para 9 (c) above.(e)Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame.(f) Repair to the jamb, cills and all sides around the window is incl in unit rate.The repair finishes to match the existing surfaces like tiles, plastering etc. 46 S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom railon either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification anddrawing, complete all as specified and as directed. 47 S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed. 48 S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm, complete all as specified and as directed. 49 S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed. 50 S&FEWC cascade with all fittings and accessories all as per manufactures instruction, complete allas specified and directed. 51 S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm, complete all as specified and directed. 52 S&F, 250mm aluminium alloy, anodisedsliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed 53 M&L for preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink prime, complete allas specified and directed. 54 M&L for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer,complete complete allas specified and directed. 55 M & L 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete allas specified and directed. 56 S & FVitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm borecentre hole mixer fixedcomplete alongwith pedestal,complete allas specified and directed. 57 S&F Vitreous China Urinal, Half stall type, white (including flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,complete all as specified and directed. 58 S&F 600mmX450mm bevelled edge Mirror of selected quality glass, mounted on 6mm thick AC building Board or commercial plywood and fixed to wooden plug with chromiun plated brass screw and cup washer,complete allas specified and directed. 59 Supply and fixingGI water tubing 15 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors, complete all as specified and directed. 60 Supply and fixingGI water tubing 20 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors, complete all as specified and directed. 61 S&F 15 mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified and as directed. 62 S&F in 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. 63 S&F 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 64 S&Fbrass cromium plated tubeler towel rail 20 mm diainclding brackets,complete all as specified and directed. 65 S& F stainless steel Towel Rack of ornamental type size 500x300, complete all as specified and directed. 66 S& F Electronic hand dryer machine, complete allas specified and directed. 67 S & F CP steel grating 75/100mm dia, complete all as specified and directed. 68 S&F 1000 litres capacity rotaional moulded polythelene water storage (Three layer ) (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR part-I,complete allas specified and directed. 69 S&F 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut,complete allas specified and directed. 70 M&L for PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement,complete allas specified and directed. 71 S&F forPVC (SWR) pipes 75mm dia bore single sockets, in any length with rubber ring joints, laid in trenches or floors/wall, complete allas specified and directed. 72 S&F PVC (SWR) bends 75mm dia bore,complete allas specified and directed. 73 S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work con-forming to Fe.290.Gde-E-165,complete allas specified and directed. 74 S & FHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete allas specified and directed. 75 S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,complete allas specified and directed. 76 S & F 15 mmGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete allas specified and directed. 77 M & L for plain cement concrete 1 :3: 6 Type D2using 40 mm graded crushed stone aggregate as in bed to drain pipes 150 mm bore including packing under and haunchingagainst the sides of pipes after they are laid and tested, complete allas specified and directed. 78 M&L for 150mm bore salt glazed ware drain pipe, of Grade A laid in trenches and jointed with cement joint , complete allas specified and directed. 79 M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) as in providing, cement concrete inlintel up to 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs,complete allas specified and directed. 80 M & L Precast reinforced cement concrete 1 : 2 : 4 Type B1, using 20 MM graded crushed stone aggregate, as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math. complete allas specified and directed. 81 Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete allas specified and directed. 82 M/L for brick work with sub class B bricks straight or curved on plan built in cement moprtor 1:4, complete all as specified and directed. 83 M&L for plain cement concrete 1:2:4 type B2, using 40mm graded crushed stone aggregate, as in surface channels and drains, complete allas specified and directed. 84 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends, complete all as specified and directed. 85 M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth with using extra cement, complete all as specified and directed. 86 M&L 75 mm thick plain cement concrete 1:4:8type D2 (Using 40mm graded stone aggregate) as sub base to floors,complete all as specified and directed. 87 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete allas specified and directed. 88 Material and labor for point wiring with 1.5 Sqmm copper conductor FRLS (Stranded) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduits, medium grade, ISI marked not less than20 mm dia with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FRLS as earth wire connected to common earth dolly and including sunk cast iron/pressed mild steel terminal boxes, junction boxes, other boxes made from 2 mm thick mild steel sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc.covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for One light point/fan point controlled by one way switch 5 Amps complete all as specified and directed. 89 Description complete all as per serial item No 88 here-in-before,but one light point / fan point wiring system controlled by oneway switchcomplete all as specified and directed. 90 Description ccomplete all as per serial item No 88 here-in-before, but one 5 Amp socket outlet point wiring system fixed on same board and controlled by one way switchcomplete all as specified and directed. 91 Description complete all as per serial item No 88 here-in-before, but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete all as specified and directed. 92 Description complete all as per serial item No 88 here-in-before, but one bell point wiring system fixed on board and controlled by one way bell switchcomplete all as specified and directed. 93 Description complete all as per serial item No 88 here-in-before, butusing PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring systemand also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductorwire used as a continuous earth wire for power point wiring system, complete all as specified and directed. 94 Description complete all as per serial item No 88 here-in-before, butusing single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Markedwith multistranded copper conductorwire used as continuous earth wire, complete all as specified and directed. 95 Supply and fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed. 96 SSupply and fixing of modular type socket of 5/6 Amps 220 Volts AC,3/5 multi pin type with two modular, complete all as specified and directed. 97 Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. 98 Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. 99 Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all as specified and directed. 100 Supply and fixing ceiling rose three terminals type made out ofpolycarbonate , isolated body, completeall as specified and directed. 101 Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type, complete all as specified and directed . 102 Supply and fixing of LED tube lightfitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colourcomplete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlpleteall as specified and directed . 103 Supply and fixing of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, completeall as specified and directed. 104 S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete setproviding of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. 105 Supply and fixingrecessed/ceiling concealed mounted down lighter lightfitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting setand also providing of suitable type of flate fexible two/three core cable and making electric, connection,complete all as specified and directed. 106 Supply and fixing ofbldg LED street light fitting of rated capacity 20W to 25Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bendof 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos ofMS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, completeall as specified and directed. 107 Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/typefor vertical type distribution boardvertical loadline type of rating VTPN 4 way type 415 volt3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA C curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electricalconnectioncomplete all as specified and directed. 108 Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable ofsize/type of distribution board of rating SPN 8 way type 220 volt AC supply systemwith IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer andoutgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical,complete all as specified and directed. 109 Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. 110 Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. 111 Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. 112 Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy dutyISI markPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wallmaking good all disturbed surfaces match to the existing surface complete all as specified and directed .Note: 3 runs of 10 Square mm cable and 1 run of PVC casing caping / PVCconduit with accessories shall be measured as 1 unit of running metre. 113 Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy dutyISI markPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of 6 Square mm cable and 1 run of PVC casing caping / PVCconduit with accessories shall be measured as 1 unit of running metre. 114 S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC)of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electricalconnection, complete all as specified and directed. 115 Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 300mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. 116 Supplying and fixingof flexible type round PVC bedded with PVC insulated and sheathed with multi FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm 5 core type (Nominal area) ISI Marked, complete all as specified anddirected 117 Supply and fixing ofrigid non metalic PVC conduit of size 20 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall inproper size of clamps, nut bolt ,and washer etc complete all as specified.and directed 118 Supply and fixing in decorative wall mounting brushed nickle finish fixture with double opal glass difuser suitable for one Nos for green and one Numbers for red indication bulb B22 typecomplete fittings all as specified and directed. 119 S&Fclassy design for focusing hanging /pandantlightsmade of aluminium mild steel suitable for including 7/9 Watt Led rechargeablebulb, complete all as specified and directed. 120 Supply , fixing / laying in trenches/on wall/under path / road etc galvanised iron pipe of size 25 mm dia meidum class including all fitting with ISI marked including necessary fittings (Excavation / earthwork for pipe line joints, andshall be measured and paid for separately), complete all as specified and directed. 121 Supply and fixing brass gate /GM globe valve 25 mm dia bore with iron wheel head comlete in replacement for spigot/socket edns for GI pipe including cutting of pipes and insertion of union ISI marked complete all as specified and directed. 122 Cutting existing pipe upto 80 mm pipe line and connecting with 25 m dia pipe including fittings such as Tee, Bends, Reducer, tail pipe, socket, nut, bolt, rubber sheet gasket etc, complete all as specified and directed. 123 Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete, complete all as specified and directed. 124 M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed.Note - Punned thickness shall only be measured and paid. 125 Supply and laying un-reinforced precast PCC cable Cover ISI marked, class LV, type-1, flat, size 250mm x 150mm x 40mm for covering cables laid dry flat as cable protection on sand, complete all as specified and directed. 126 S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore, complete all as specified and directed. 127 M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soilall as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete all as specified and directed. 128 Supply, fixing, commissioning and testing of 3 star rated wall mounted split AC, dual invertor based with cooling and heating function and digital inverter type complete set of hi wall split type indoor and outdoor complete set of air conditioner unit with cardless remote control and full filling of initial refrigent gas alongwith having inbuilt heating and cooling arrangement and digital inverter twin rotary type compressor suitable for AC of rating capacity 1.5 TR and suitable for operation of 230Volt 50Hz single phase electric supply including provn of MS stand & bracket for fixing of outdoor and indoor unit system and also providing of both type /size sunction and discharge coper refrigerant piping attachment system of any length and duly both connected it from outdoor unit to indoor unit system alongwith duly overlapped it by nitrile insulation, with insulation taping work and suitable drain pipe line system upto ground level for dropping out the water outside from evaporator unit and making electric connection with three core copper cable of suitable size and making hole on wall / roof and making good all disturbed surface as per existing,complete all as specified and directed. 129 Description all as per serial item No 124 here-in-before, but of capacity 2 TR,complete all as specified and directed. 130 Supply, fixing, commissioning and testing of wall mounting hanging based automatic digital operation based voltage stabilizer with copper winding based unit of single phase naturally air cooled indoor type with having digital display and suitable for operation on single phase AC supply and with having designed voltage for input & output voltage 90 volt to 230 volt with accuracy +2.5% and having low and high voltage cut low voltage cut off 90 (-) 5 volts high voltage cut off 230 V (+5) Volts along with start time delay system with time delay adjustable from 30 second to 1.5 minutes system complete unit set of rating capacity 5 KVA, complete system all as specified and directed. 131 S&F sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection, complete all as specified and directed. 132 Supply, installation, Testing & Commissioning ofElectric storage water heater (vertical type) 25 litres, with porcelain enamel glass lined inner tank 230 V, AC, Single phase, IS 2082 Marked, 5 Star rating, with 15mm brass non return valve and including connecting fasteners not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonry work for proper mounting of Geyser fastenings bolts etc as directed as site reqmt and making necessary inlet and outlet water & electric connection tested on load including provision of PVC insulated & PVC sheathed copper conductor cable 2.5 sqmm 3 core upto 15 Amp plug point, complete all as specified and directed. 133 Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection,complete all as specified and directed

BRR:8659712 Restoration Of Cement Concrete And Paver Block Passage With Allied Works Disturbed By Water Department And Other Pu Agency Near Holding No-S-157/3,S-157/1,S-157/4,R-156,R-154,R-72/A,R- 72/B,R-37,R-29 Etc In Ward No-137, Br-Xv.

BRR:8659697 Tender for Development Of Paver Block Foothpaths Near 23,28A Gariahat Road And Other Footpaths In Ward No 90 Under Br Viii Kmc

BRR:8659694 Tender for Development Of Paver Block Footpath Along Monohar Pukur Road In Ward-85, Under Br-Viii. (Apas/01/161/285/0001)

BRR:8658233 Tender for Providing Paver Block Footpath And Tree Plantation At Ranjith Maha Park .In Thirumazhisai Town Panchayat

BRR:8658224 Tender for Providing Paver Block Road At Ward No:2 Connection At The End Of Four Cement Road In Bharathipuram In Uthangarai Town Panchayat

BRR:8658223 Tender for Providing Paver Block Road At Ward No:3 Nattamai Kottai Main Street In Uthangarai Town Panchayat

BRR:8658221 Tender for Providing Paver Block Road At Ward No:4 Anna Nagar 2Nd Street In Uthangarai Town Panchayat

BRR:8658220 Tender for Providing Paver Block Road At Ward No:5 M.S.M.Thottam (Near Sakthi House) In Uthangarai Town Panchayat

BRR:8658219 Tender for Providing Paver Block Road At Ward No:6 Ambedkar Nagar Cross Roads In Uthangarai Town Panchayat

BRR:8658081 Tender for special repair To Rd Road To Kalatangi Road Such As Pothole Repair And Sdbc, Over Laying Of cement concrete Pavement With Paver Block For The Year 2025-26

BRR:8658002 Tender for Annual Maintenance Estimate Of Master Water Supply Scheme In U/E Narnaul, Providing And Laying Of Wet Mix Macadam, 60 Mm Thick Paver Block Etc In Shopping Center Area At Narnaul And All Other Works Contingent Thereto

BRR:8657972 Supply Of Sanitation, Electrical ,Building Material For Prisoners At Sub Jail Jaora , Sarso Oil , Nariyal Oil , Tooth Brush , Finol , Cruid Oil Jala Hua Grees , Plastic Mug 1 Liter , Plastic Balti Paint Wali 20 Liter , Plastic Kanghi , Greese , Bathing Soap , Shampoo Pouch , Kapde Dhone Ka Sabun , Washing Powder , Blade , Ustre , Kechi , Dustbin 32 Liter , Dustbin 5 Liter , Dormate 2 X 2 , Zero Machine , Tokri Bans Ki , Jibi Plastic , Colgate Powder , Chuna , Geru , Pili Mitti , Bans Jhadu Badi , Bans Jhdu Chhoti , Khajur Jhadu , Matke May Dhakkan , Kuchi , Toilet Brush , Toiletcleaner , Paint All Colour Includin White , Tarpin , Led 3 Watt , Led 5 Watt , Led 9 Watt , Led 12 Watt , Led 14 Watt , Led 60 Watt , Led 75 Watt , Motor Winding 3 Hp , Motor Winding 5 Hp , Motor Winding 10 Hp , Tube Well Cable 6Mm , Aata Chakki Part Ambri Stone , Wire Bundle 1/18 Copper Wire , Wire Bundle 3/20 Coper Wire , Torch Cell , Tape Roll , Brick 4 X 8 Inch , Baluret 3.5 Meter Wali Tractor Trolly , Cement 50 Kg Bag , Moti Ret 3.5 Meter Wali Tractor Trolly , Kali Gitti Moti , Kali Gitti Churi , Kota Stone , Loha Sariya 6Mm , Loha Sariya 9 Mm , Loha Sariya 16Mm , Tiles Chhoti , Tiles 15 X 15 , White Cement , Paver Block , Tin Profile 4 X 12 , Tin Profile 4 X 16 , Tin Profile 4 X 18 , Ms Pipe 2 Inch 20 Feet , Ms Pipe 2.5 Inch 20 Feet , Lohe Ke Darwaje 3.5 X 6.5 , Lohe Ke Darwaje 3 X 4 , Letrin Sheet May Paydan , Cutter Machine Ke Patte , Lohe Ke Angle 8 Inch , Welding Rod , Nal Toti 1/2 Inch , Nal Toti 1 Inch , Gi Elbow , Switch Buttun , Starter3 Hp , Starter 5 Hp , Bulb Holder , Machchar Jali , Main Switch 63 Amp , Mainswitch 32 Amp , Fan Regulator , Handwal Upvc , Gatewal , Supda , Power Plug , 5 Pin Socket , 2 Pin Socket , Mcb 63 Amp , Mcb32 Amp , Mask , Hand Sanitizer , Aata Channi , Rasoi Bartan , Water Tanker Per Tanker Capacity 5000 Liter

BRR:8657603 Provision Of Toilet Block For Staff Near P-62 Complex At Mi Line And Provn Of Parking Shed Near Officers Mess At Hebbal Garrision Under Ge (North) Bengaluru; 1 Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out hard dense soil all as specified & directed 2 Removing excavated soil to a distance exc. 1.50 km but not exc. 5 km and depositing where directedall as specified. 3 Excavation in trenches not exc 1.5m wide and 1.5m deep and getting out in hard/dense soil for fundation and smilar workall as specified & directed 4 Removing excavated soil to a distance exc. 250 m but not exc. 500 m and depositing where directedall as specified. 5 Returning filling in including spreading levelling, watering and well ramning in layers not exc 25 cms thick all as specified & directed 6 Earth Filling under floors or in foundations including watering and consolidation all as specified & directed 7 M & L for Plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in in foundations, filling and mass concrete all as specified & directed 8 M&L for Reinforced cement concrete (1:2:4)type B-1using 20mm graded stone aggregate, Nominal mix in Foundations footings, plinth beams, bases for columns, mass concrete etc all as specified & directed 9 M&L for Reinforced cement concrete(1:2:4)type B-1using 20mm graded stone aggregate,Nominal Mix in Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified & directed 10 M&L for Reinforced cement concrete(1:2:4)type B-1using 20mm graded stone aggregate,Nominal Mix, asin Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified & directed 11 M&Lfor Reinforced cement concrete (1:2:4)type B-1using 20mm graded stone aggregate, Nominal mix as in chajjas or similar items all as specified & directed 12 M&L for Formworkto sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter finishedfair flat surfaceall as specified & directed 13 M&L for Formwork tosides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding supports, overhangs, etc. also splays between floors andbeams, etc. finishedfair flat surfaceall as specified & directed 14 M&L for Formworkto soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)finishedfair flat surfaceall as specified & directed 15 M&L for Formwork to edges of concrete flats, treads, breaks in floors, window-cills, concrete railing, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide in rough finished flat surfaces of concrete. 16 M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges finishedfair flat surfaceall as specified & directed 17 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed 18 M&L for Mild steel TMT bars 5mm dia and over upto andincluding 10mm, cut to length, bent to shape required, including cranking, bending spirally as Stirrups, spacers, binder all as specified & directed 19 M& L for water proofing treatment to RCC roof slab with following specification complete all as specified & directed :-(i)screed bed/rendering 15mm thickcement mortar (1:3) mixed with and including liquid water proofing compound as per manufacturers instructions.(ii)Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density o 0.87-0.89 Kg/Lit at 25º C on the prepared dry roof surface.(iii) Laying 3 mm thick APP modified water proofingmembranereinforced with non woven polyester mattcomplying following specifications :-(a) Membrane weight>3.8 Kg/ sqm 20 (b) Non woven polyesterweight>160 gm/Sqm(c) Softening point of membrane >150º C(d) Joint tensile strength longitudinal >650 Sqm Cm at 230º C & Transverse> 450/Sq Cm(e) Tear strength - longitudinal >300N & Transverse>250 N Direction (f) Elongation > 30 %(g) Impermeability under water pressure > 3 Kg/Sq cm(iv) apply a coat of solar reflective bituminous aluminium paint @ 0.10 litre/sqm over memberane 21 M&L forPre-cast cement concrete(1:3:6)type C1 using 20mmgraded stone aggregate as in solid block masonary exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed 22 M&L forPre-cast cement concrete(1:3:6)type C1 using 20mmgraded stone aggregate as in solid block masonary not exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and as directed 23 M&Lfor rendering15mm thick in two layers i.e., backing coat 10mm thick cement mortar (1:6) and 5mm thick floating coat in CM 1:4 mixed with water proofing compound over brick or concretewall surfaces all as specified and as directed.(Note : WPC will be paid separately) 24 Supply only liquid water proofing compound, ISI marked, all as specified and as directed. 25 M&L forrendering10mm thickcement mortar (1:6) on brick or concrete wall surfaces all as specified and as directed 26 M&L for rendering 5mm thick cement mortar (1:3) on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like all as specified and as directed. 27 M&L for Hardcore of broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and as directed. 28 M&L forPCC(1:4:8) type D-2 using 40mm graded stone aggregateas in 100mm thick sub base for floors, ramp etc.all as specified and as directed. 29 Material and labor for PCC(1:2:4) type B-1 using20mm graded stone aggregate as in 25 mm thick in flooringfinishing cement concrete surface even and fair all as specified and as directed. 30 M&L forPlain Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregateas in 75mm thick plinth protection finished even and smooth without using extra cementincluding joints filling with sealing compound Grade A complete all as specified and directed. 31 M&Lfor PCC(1:2:4)type B-0using 12.5 mm graded stone aggregate as in coping, as in hold fast block, fillingsteel frame of window,in roof kerbs of mud stops, rounded or chamfered on edgescills, steps etc; all as specified and directed. 32 M& L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm as in floors etc, incl screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed 33 M&L Glazed ceramic tiles coloured 350mmx 250mmx 7mm /450mmx350mm x 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified andand as directed 34 M & L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPSsupplying & fixing in frame at site all as specified and as directed 35 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and as directed 36 S & F Butt hinges medium weight, cold rolled mild steel 100mm size and fixedto door frame and shutterduly welded/screwed complete all as specified and as directed 37 S & F Aluminium anodized barrel tower bolt of extruded section of size 125mm long complete all as specified and directed. 38 S & F Extruded Aluminum handles 150mm size, fabricated type, anodised all as specified and directed. 39 M&L for PCC(1:2:4) type B-0using 12.5 mm graded stone aggregate as in coping, hold fast block, steel frame of window back filling andin roof kerbs of mud stops, rounded or chamfered on edgescills, steps etc; all as specified and directed. 40 M&L forGranite 18/20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us�ing marble dust with admixture of pigment to match with shade of granite. all as specified and directed. 41 S&Frotational moulded polythylene water storage tank 500 ltrs capacity, triple layered(cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed. 42 S&FVitreous china european type pedestal pattern water closet of size 730x370x700mm, floor mounted onepiece toiletnoise free gentle closure, white, oval shape or Reach shape complete all as specified and as directed.(Make Kohler Model No OveK-17629IN-SM-0 or equivalent in Jaquar or Hindware) 43 S & FWash hand basin, Vitreous China (flat back or angle back type)size 550mm x 400mm with & including necessary vitreous china pedestalincluding cutting for and pinning in ends of brackets or erecting standcomplete all as specified and directed. 44 S&FPVC (SWR) Pipe 110 mm dia bore, single socketed in any length with rubber ring joint laid in trenches /fixed on floor / walls including jointing with solvent cement all as specified and directed. 45 S&FPVC (SWR) bends110 mm dia bore with access door any radius complete all as specified and directed 46 S&FPVC (SWR) junction single, (Single T) equal or unequal 110 mm dia bore complete all as specified and directed 47 S&FPVC (SWR) vent cowl 110 mm dia bore complete all as specified and directed 48 S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. 49 S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brassscrews and wooden/plastic cleatscomplete all as specified and directed. (Minimum weight 190gms) 50 S & Fbevelled edge mirror of size 600mmx450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs withchromium plated brass screws and cup washers complete all as specified and directed. 51 S & FSoap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and directed. 52 Supplying and laying of CPVC pipes 25mmouter dia bore SDR 11 & Plain CPVC SDR 11 fittings into walls, ceilings or in floors etc.,complete all as specified & directed 53 Supplying and laying ofCPVC pipes20mm dia bore SDR 11 & Plain CPVC SDR 11 fittings into walls including cutting chasesfor concealing in wallscomplete all as specified & directed. 54 Supplying and fixing ofCPVC Brass Elbow 25mm dia bore complete all as specified & directed. 55 Supplying and fixing ofCPVC 25mm dia bore Brass Tee complete all as specified & directed. 56 Supplying and fixing ofCPVC 20mm dia bore Brass Elbowcomplete all as specified & directed. 57 Supplying and fixing ofCPVC 20mm dia bore Brass Tee complete all as specified & directed. 58 Supplying and fixing ofCPVC 25mm dia bore BALL VALVEcomplete all as specified & directed. 59 S&FMixer for wash hand basin formixing hot & cold water,Brass chromium platedfor screwed down for iron pipe 15 mm dia bore complete all as specified & directed 60 S&Fwall mixer for mixing hot and cold water,Brass chromium plated,screwed down for iron pipe 15mm dia bore and fixed complete all as specified and directed. 61 S & FBib tapsfancy type chromium platedcast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm dia bore or for brass ferrule complete all as specified and directed. 62 S & FStop valves, fancy type with long shank and cup (concealed type), chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe15 mm dia bore or for unions complete all as specified and directed. 63 S & FStop valves/angle valves,fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm dia bore or for unions complete all as specified and directed. 64 S & F PVC waste pipe32mm diafor WHB/ urinal etc, complete all as specified and as directed. 65 S & FPVC connections 15mm dia600mm long with PTMT nuts complete all as specified and directed. 66 M&L for preparation of newly plastered wall surfaces and applying two coat of cement base paint, including one coat of white washing primer complete all as specified and as directed. 67 M & L for preparation of newly plastered wall surfaces and applying two coats of Acrylic emulsion distemper over a coat of alkali resistant primer complete all as specificed and as directed 68 M & L for preparation of newly plastered surfaces of Ceilings, soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the likeandapplying three coats of of white wash complete all as specificed and as directed 69 S&FAluminum powder coated ventilators of size 500mm x 850mm, with adjustable 4mm thick figured glass louvers, fixed in half portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed. 70 M & L for powder coatedaluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, weight not less than 2.507kg/sqm, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per requirement all as specified and as directed. 71 Excavating over areas not exc 1.50m deep and getting out in Hard/Dense soil complete all as specified and directed. 72 M & L forcement concrete paver block 60mm thick of M-35 grade, factory made chamfered edge with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all as specified and as directed. 73 M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. 74 Excavating in post holes (Or similar) in Hard/dense soil, each not exc 0.5 Cum getting out, returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm thick watering and removing surplus soil to a distance n.exc 50 m and making good all as specified & directed 75 M&L for Plain Cement concrete (1:3:6) type C-2using 40mm graded stone aggregrate as in foundations, filling and mass concrete all as specified & directed 76 S & FRolled Mild Steel work in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe-410- W(Gde-E-250) quality-B all as specified & directed 77 S & F for steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410- W(Gde-E-250) quality-B all as specified & directed 78 S & FPre - painted galvalume sheet, aluminum zinc coating, 150AZ,GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed 79 M&L for Preparation of new steel or iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primerall as specified & directed 80 M&L forMild steel screw bolts(machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long all as specified & directed 81 M&L forPoint WiringwithPVC insulated unsheathed cable 1.5 Sqmm single core 1100 volts grade multi strandedFRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories including GI/ MS branded sunken boxes of suitable module concealedon walls including modular frame and cover of suitable modulefixed with cadmium plated iron screws for housing modular typeswitches, switch socket outlets, fan regulators etc., includingof PVC insulated single core multi stranded copper conductor cable 1.5 Sqmmas earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :- 82 One light point controlled by one switch 83 One fan/exhaust point controlled by one switch/regulator 84 One 3 pin socket out let 5 Amp on same board with other switchesNote for item No 80 complete :-(i) The earth wire for the points in the same circuit can be looped from point to point(ii) Earth wire shall be taken inside the conduit(iii) Terminal box is deemed to be included in the quoted rate.(iv) Cost of any length of cablefrom DB to any switch/ socket boardbe included in point wiring. 85 S&F LED batten with luminaire suitable for indoor applications 18/20 Watts, 4 feet long with extruded aluminiumhousing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj Cat No.BCLAB18 WH LED P or equivalent Makes & model specified in P S 86 S&F LED battenwith luminaire suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes &model specified in P S 87 Supply and fix Modular switch 1 way 6Amps,1 module, 230volts all as specified and directed 88 Supply and fix Modular Socket, 6Amps- 2/3 pin combined 2 module all as specified and directed 89 S&F MCB SPN32 Amps 240 voltsC curvesetc complete all as specified and as directed 90 S&F MCB single pole 240 volts 6 to 32 Amps, C curves complete all as specified and as directed 91 S&F MCB Distribution BoardSPN 4 way,double door type 240 volts with 200 Amps rated bus baras specified and as directed. 92 S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed 93 M&L for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS TMT bars reinforced at 10 cm centre to centre both ways includingfunnel with watering pipe wire mesh and lugs,test point complete all as specified and as directed. 94 S&FLED bldg securitylight fitting30Watts capacity with pressure die cast housing along with prismatic polycarbonate difuser with IP 66protection complete all as specified and as directed.(Make:- Bajaj Cat No.:- ENXT P 30L WH SY PC SD or equivalent Makes specified in P S) 95 S&F Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etcincluding applying two coats of aluminum paintover a coat of red oxide primer complete all as specified and directed. 96 S&F Exhaust Fan, steel body AC single phase, 230V of size 200mm Sweep with, blade and frame and louver all as specified & directed.

BRR:8657590 Tender For Provision Of Jafri Wall And Steps For 604 & 626 Garud Flights And Provision Of View Cutter At Various Locations At Hebbal Under Ge (North) Bangalore; 1 Excavation in trenches in hard/densce soil not exc 1.5 m wide and not exc 1.5m in depth and getting out allas specified & directed. 2 M&Lfor Plain Cement Concrete(1:4:8)type D-2 using 40mm graded stone aggregates as in foundation filling and mass concrete as in lean concrete allas specified & directed. 3 M &L for Pre-cast cement concrete(1:3:6) type C-1using20 mm graded stone aggregate as in solidblock masonryexceeding10 cm in width and setting in cement mortar(1:6) complete all as specified and directed. 4 M &L forPrecast cement concrete(1:2:4) type B-0using 12.5 mm graded stone aggregate as inlouvresand jallies25 mm thick (measured solid) including all mouldings but excluding frame set in cement mortar (1:4) complete all as specified & directed. 5 M&L for Reinforced Cement Concrete (1:2:4)type B-1using 20mm graded stone aggregateas in beams, cantilevers, bressummers, lintels over 1.50 Metre spancomplete all as specified and as directed. (NOTE : reinforcement & Formwork will be measured and paid separately) 6 M&Lfor TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. 7 M&Lfor TMT Bars 5mm dia & over upto 10mm dia as in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. 8 M&Lfor Rendering 15mm thickCement Mortar (1:4) on Fair face of Brick Walls or on concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed. 9 M&L for Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., rough finished flat surfacescomplete all as specified and as directed. 10 M &L for preparation of new plastered wall surface and applyingtwo coats of cement base paint over a coat of primer complete all as specified and as directed. 11 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in hard/dense soil complete all as specified and as directed. 12 Removing excavated soil to a distance not exc 50 mtr and depositng where directed etc complete all as specified and as directed 13 Excavating in post holes (Or similar) in soft/loose soil each notexc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good complete all as specified and as directed 14 M&Lfor Plain Cement concrete(1:3:6) type C-2using 40mm graded stone aggregrate as in foundations, filling and mass concretecomplete all as specified and as directed 15 M & Lfor Steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing PPGI Sheet etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and as directed 16 S & F Pre - painted galvalume sheets,aluminum zinc coating, 150AZ,GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed 17 M&L for preparation ofnew steel surfaces of any description over 10cm in width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed 18 M&L for Mild steel screw bolts(machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm longcomplete all as specified and as directed 19 Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard dense soil complete all as specified and as directed 20 Excavationover areas not exc 1.50m deep and getting out in Soft/Loose soil complete all as specified and as directed 21 Removing excavated soil to a distanceexc. 250 m but not exc. 500 m and depositing where directed complete all as specified and as directed 22 M & L for Hardcore of broken stone of gauge not exc. 63 mm, deposited, spread and levelled in layers notexc. 15 cm thick,wateredand rammed to a true surface complete all as specified and as directed 23 M & L for Plain cement concrete(1:4:8) type D-2using 40mm graded stone aggregateas in 100 mm thick in sub-base concrete to pavement complete all as specified and as directed 24 M & L forPlaincement concrete (1:3:6)type C-2 using 40 mm graded crushed stone aggregateas in 75 mm thick subbase/plinth protection,laid in panelscomplete all as specified and as directed 25 M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, set ,jointed and pointed in neat cement slurry in floors (with grey cement and pigments) over & including20mm screed bed or bedding layer of cement mortar(1:6) complete all as specified & directed 26 M & L forFactory made chamfered edge cement concrete paver block 60mm thick of M-35 grade with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed

BRR:8657589 Tender For Term Contract For Artificers Works At Af Station Faridabad Under Aor Of Ge (Af) Faridabad; 01 Old bricks/ brick bats (consolidated quantity of brick masonry obtained from demolition Cum 500.00 02 Old shutter n.exc 1.00 Sqm including iron mongery Each 160.00 03 -do- but exc 1.00 Sqm and n.exc 2 Sqm Each 200.00 04 Old wooden chowkats with shutters not exc 1.5 Sqm including iron monger Each 200.00 05 Old wooden chowkats with shutters but exc 1.5 Sqm and n.exc 4.00 Sqm each including iron monger Each 300.00 06 Old steel window Each 250.00 07 Old iron retrieved form angle iron door frames, steel doors, purlins, grills, gates, steel sheeting etc. Kg 25.00 08 Old flushing cistern high level of any description and capacity Each 120.00 09 Old flushing cistern low level of any description and capacity Each 50.00 10 CI Nahni Trap, floor trap etc upto 75mm bore size complete Each 75.00 11 Cast iron drain pipe upto 100mm bore size RM 100.00 12 Old semi corrugated or corrugated AC sheets 6mm thick including J bolts complete Sqm 20.00 13 Old AC building board plain 4mm thick in any size complete Sqm 25.00 14 Old wooden scantlings/battens/fillets of 2nd class hard wood any size complete Cum 5000.00 15 Old brass bib taps/stop valves/pillar taps/float valves etc complete 15mm size 1200mm Each 40.00 16 Old wire mesh not covered under item No 3, 4, 6 to 8 above Sqm 20.00 17 Old PVC water storage tanks upto 500ltrs capacity Each 250.00 18 Old UNSV Galvalume Sheets Sqm 50.00 19 Old UNSV Paver Block/Chequered tiles Sqm 100.00 20 Old UNSV PVC doors incl frame Sqm 200.00 21 Old UNSV Timber Cum 4000.00 22 Old PVC water storage tanks above 500ltrs and upto 1000 ltrs capacity Each 500.00 23 Aluminum scrap Kg 150.00 24 Old Brick tiles Sqm 50.00 25 Old GI tube 15mm/20mm dia RM 20.00 26 Old CGI/PGI sheets Sqm 100.00 27 Old plywood /particle board/PVC boards Sqm 20.00 28 Old PVC bib taps/stop valves/pillar taps/float valves etc Each 5.00 29 Granite Stone Sqm 50.00 30 Marble Stone Sqm 50.00 31 Old UNSV boarding any description Sqm 20.00 32 Scrap brass/copper any type Kg 300.00 33 Old PVC bend/branch piece/cowl any size Each 20.00 34 Old PVC pipe 75/110 mm RM 15.00 35 Old UNSV mixer any type Each 100.00 36 Old curtain rod RM 10.00 37 Old towel rail Each 20.00 38 Old PVC panels Sqm 30.00 39 Old TMT bar any size Kg 20.00 40 Old U/S Point Wiring 1.5 sq mm cable. Point 20.00 41 Old U/S Point Wiring 2.5 sq mm size cable. Point 30.00 42 Old U/S Point Wiring 4.0 sq mm size cable. Point 40.00 43 Old U/S Switch, socket, bell push, fan, regulator. Each 2.00 44 Old U/S Lamp holder, Ceiling Rose ,Call bell Each 3.00 45 Old U/S DBs /2 Pin earth plug socket Each 25.00 46 Old U/S MCBs off sizes Each 3.00 47 Old U/S Aluminium scrap Kg 80.00 48 Old U/S Copper scrap Kg 120.00 49 Old U/S Iron scrap Kg 25.00 50 Old U/S PVC scrap Kg 15.00

BRR:8657584 Tender For Misc Repairs At Cav Auditorium, Sprox, Trax, Bronze Stable Hastler And Annexe In Aor Of Age B/R-Ii Under Ge(N) Ahilyanagar; 1 Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor and removing all rubbish/ dismantled material outside MD Land. all as directed. 2 Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed. 3 M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stoneaggregate as in sub base all as directed. 4 M&L for Glazed colour ceramic tiles 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured as approved by GE as in dado / skirting or on vertical surfaces,over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. 5 M&Lfor Non skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,(300x300)mm as in floor etc laid over and including screed bed 15mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. 6 M&Lfor Non skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,(400x400)mm as in floor etc laid over and including screed bed 15mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. 7 M&L for vitrified/ ceramic light shade coloured tiles8-10 mm thick as approved by GE (square /rectangular) area of each tilenot exceeding 0.36 sqm, (600 x600)mm as in floor etc laid over and including screed bed 15mm thick in cement and sand mortar (1:6 ) set and jointed with white or coloured cement to match the shade of tile etc complete all as specified and as directed 8 -Ditto- as per Ser item No 7 above but on skirting and backing coat of 10 mm thick in CM 1:4 9 M&Lfor machine cut kota stoneflooring18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc as directed by Er-In-Charge. 10 M & L for Chequred cement concrete tiles with pigment 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar(1:6) etc complete all as specified and directed by Engineer-in-Charge 11 M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge 12 M&Lfor 15-18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointingin white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed. 13 M&L for machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including15 mm thick screed bed incement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed. 14 M&L for 20 mm thick Rough dressed (shahabad) lime stone slab flooring, laid dry, jointed and pointed in cement mortar 1:3as in floor/plinth etc over bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 in floor/ plinth etc over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed 15 Fixing only 20mm thick rough dressed Shahabadstone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 including dismantling complete all as specified and directed 16 M&L for heavy duty vitrified paver tiles 30cm x 30cm x 10mm thick,approved by GE withnset,jointed and pointed in neat cement slurry with grey cement and pigment to match in floors,over and including screed bed or bedding a layer of 15 mm in cement mortar 1:6 complete all as specified and directed by Engg-in-charge. 17 Demolition of plain cement concrete solid block//stone/brick masonary built in cement mortar & removing all rubbish/dismantled material outside MD Land.all as directed. 18 M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge 19 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built incement mortar 1:6 but except stone complete all as specified and directed by Engineer-in-Charge 20 M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C-5 1:5:10using 20 mm graded aggregatesand setting in mortar 1:6 complete all as directed. 21 Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with waterall as directed 22 M&Lforrendering, 12 mm thick on stone surfaces in cement mortar 1:6 surfaces finished even and fair finish all as specified and directed. 23 M&Lforrendering, 10 mm thick on brick/concrete surfaces in cement mortar 1:6 surfaces finished even and fair finish all as specified and directed. 24 M&Lforrendering, 15 mm thick on stone/brick/ concrete surfaces in cement mortar 1:4 surfaces finished even and fair without using extra cement all as specified and directed. 25 M&Lfor 1 mm wall care putty on walls complete all as specified and directed by Engg-in-charge. 26 M & L for complete removal of existing treatment,washing,rubbing down and stopping od distempered and painted surface of walls and apply two coat of luster (any tint) over a layer of wall care putty & a coat of suitable primer complete all as specified and directed. 27 Dismantling of single layer manglore pattern in roofing & removing all rubbish/dismantled material outside MD Land.all as directed. 28 -ditto- all as per ser item no 27 above but bedded in cement morter 29 M&L for roofing tile, manglore pattern interlocking at sides joints laid dry 30 -ditto- all as per ser item no 29 above but except manlore pattern tiles 31 M&L Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement morter 1:6 32 Dismantling timber scantling 40 sqcm and over in section, in any postion framed work as in scanging of main joist of roof & removing all rubbish/dismantled material outside MD Land. 33 -ditto- all as per ser item no. 32 above but in fillets, rails, posts, rafters purlins etc under 40 sqcm in section framed work & removing all rubbish/dismantled material outside MD Land. 34 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge & removing all rubbish/dismantled material outside MD Land.all as directed. 35 M&L for second class hard wood in scantling of roof rafters, etc wrougt framed 36 S&F Pre-painted Galvalume sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. 37 Supply and fixPre-painted 0.50mm thick plain, galvanised sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with, 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. 38 Dismantling wrought iron or mild steel work of any description not otherwise provided for 39 S&F Steel work in tubular trusses Roof trusses (framed) of section Rectangular/square/circular, post,trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 2014 and IS 4923- 2017 grade St.-240 40 M & L for filleting in any position in repairs and to any shape in cement and sand mortar (1:4) including all mitres, stops etc exc 25 Sqcm but n.exc 50 Sqcm etc complete all as specified and directed by Engineer-in-Charge 41 Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges devicecomplete connecting to P or Strap all as directed. 42 Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed. 43 S&F in repair for Vitreous China bowl urinal flat back size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe ad waste pipe) 44 Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed. 45 S&F fix in repairs wash hand basin with pedestal vitreous China white , flat back or angle type of size 500 X 400 mm incl pedestral etc complete all as specified and directed by Engineer-in-Charge 46 Supply and fix in repairs ceremic table top wash hand basin vitreous China,as approved by GE,including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed.(Ceremic Cera Cat No.S2020137,Calburt and equivalent make) 47 M&L for preparation of new unplastered or plastered surfaces and applying two coats of oil bound distemper includingchalk whitening on wall including smooth roller finish complete all asdirected. 48 M & L for preparation of newly plastered surface of walland apply two coats of cement based paint over a coat of alkali primer any height including scaffholding etc complete all as directed. 49 M&L for preparation old unplastered or plastered surfaces and applying one coats of oil bound distemperingon walls all as directed. 50 .-ditto- all as per ser item no. 49 above above but two coat of OBD on old surface 51 M & L for complete removal of existing treatment,washing,rubbing down and stopping old distempered and apply a coat of wall care putty over the surface of walls and get the wall in plumb line and applying two coats of oil bound distemperingon walls all as directed. 52 M & L for preparation of old plastered or unplastered surface of walls including cornices etc by brooming down or steel wire brushing scraping down smook soot,moulds,moss and efflorescent salt,trading oil and greasy spots and apply one coats of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.. 53 .-ditto- all as per ser item No 52 above (here-in-before) but on ceiling. 54 M & L for preparation of old painted surfaces of wall and applying two coats of cement based paintall as directed. 55 M & L for preparation of old painted surfaces of wall and applying one coats of cement based paintall as directed. 56 M & L for preparation of old plastered treated surface of walls by brooming down and apply one coats of wheather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as directed. 57 M&L for preparation of old surfaces of wood of any description exc 10cm width/ girth incl cleaning applying one coat of synthetic enamel all as specified directed by Engineer-in-charge. 58 M&L for preparation of old steel and ironsurfaces, of any description, over 10 cm width or girth not other wise described and applying one coats of synthetic enamel paint over a coat of red oxide primer 59 Taking down chowkats or framesexc 1.5 Sq m but n exc 4.00 sqm with shutters (without taking off shutters from the frames) all as directed. 60 Taking down chowkats or framesn exc 1.5 Sq m with shutters (without taking off shutters from the frames) all as directed. 61 Taking down shutters of any description exc 1 sqm and n exc 2 sqm each all as specified directed by Engineer-in-charge. 62 Taking down shutters of any descriptionn exc 1 sqm each all as specified directed by Engineer-in-charge. 63 S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified, 64 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 65 M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 66 Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides 67 Supply and fix 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed. 68 Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube,all as directed. 69 Supply and fixing Factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28to30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face 70 Supply and fixstainless steel wire cloth 0.36 nominal dia of wire and average width of aperture1.40 mm and fixed with tinned tacks or galvanised wire staplesall as directed. 71 Supply and fix for 3 mm thick sheet frosted/pin headed in squaresn exc 0.50 sqm in each pane 72 Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm 73 Supply and fix aluminium alloy, anodised, sliding door boltwith hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section andfixing bolts and sliding bolts of extruded section of castaluminium alloy and fixed 300mm long. 74 Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long. 75 Supply and fix aluminium anodised handles of extruded section 150mm long. 76 S&F in repair 300mm mild steel ordinary rat tail rod patteren door spring including roller and roller plate complete all as specified and directed 77 S&F in repair aluminium extruded section body door closer for aluminium door shutter hydraulically regulated,designation No 1 universal type,suitable for door shutter upto 700 mm in width and of weight not more than 35 kg and fixed.complete all as specified and directed. 78 S&F in repair Cylindrical Latch Door Lock Tubular (Dumbell lock) stainless steel finish fixed in door complete all as specified and directed by Engg-in-charge.Make:Godrej, Europhia and equivalent. 79 S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed. 80 M&Lfor two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed. 81 M&Lfor two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed. 82 Supply and fix mild Steel 20 mm dia decorative powder coatedcurtain rods with fixing brackets fixed in repairscomplete all as specified and directed. 83 Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc all as directed. 84 S&F in repair wall mixture, with provn for overhead shower all as specified and directed by Engg-In-Charge 85 M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious groutand applying 10mm thick cement plaster in CM 1:4.Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providingPCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqmetc after dismantling the existing sunken floor etc complete all as specified and directedby Engineer-in-Charge Note :Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE. 86 Cleaning the surface with wire brush,detecting sources of lea and removing/ taking down unsound treatment/surface, proving M&L for carrying out non-destructive water proofing treatment to sunken portion of slab,floor and walls of bath, WC, WHB and floor trap (combined unit) by using construction chemical method as hydrophobic PU grouting etc with first course of injection MDI based PU foam and second course of injection PU plain all as manufacturers instruction etc, the PU foam shall have 100% solids and solvent free,and shall expand 30-40 times its volume at liquid stage in presence of water,the PU plain injection shall have minimum 100CPS visscosity and shore hardness minimum 50 complete all as specified and directed.Make:PIDILITE or equivalent. 87 M&L for fixing the metallic packer for hydrophobic PU foam including making holes and sealer all as per manufacturers specification,the PU foam shall have 100 % solids and solvent free,and shall expand 30-40 times its volume at liquid stage in presence of water,the PU plain injection shall have minimum 100 CPS visscosity and shore hardness minimum 50 complete all as specified and directed. Make : PIDILITE or equivalent.Note : This item is catered only for M&L by for fixing the metallic packer 88 M&L for the chemical cleaning of tile joints and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/ matching colour) epoxy tile grout of M/S Pidilite, ROOF RTM epoxy or euivalent,curing,cleaning the surface etc as per the sample done at site complete all as specified and as directed. 89 S&F in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 7-8 mm thick with washable metallized polyster foil backing with vinyle covered edges supporting sections shall be of sutable size from same makes embossed on section and level adjuster duly suspended by 2mm dia GI wire fixed to roof at 600mm center to center as per manufacturere,s instruction and all as directed Make : Armstrong or equivalent in Saint Gobin/Lafarge 90 Supply and fix in repair health faucet with 15 mm dia 1.25 m long flexible tube wall mounted / hooked including making connection and fixed in position complete all as specified and directed by Engg-in-charge 91 Supply and fixin repairbib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handlescrewed down for iron pipe or for brass ferrule all as directed. 92 Supply and fix in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore 93 Supply and fixin repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. 94 Supply and fix in repairs, shower rose with shower arm 95 Supply and fix in repairs 15 mm dia pillar tap(Swine neck), cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. 96 Supply and fix in repairs 15 mm dia pillar tap basin mixer cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. 97 Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads nexc 1.5 Sqm. 98 M&L for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as directed. 99 Supply and fixin repair stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture1.40 mm and fixed with tinned tacks or galvanised wire staplesall as directed. 100 Supply andfix in repairs rotational moulded polyethylene water storage tanks Tripal layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting complete all as specified and directed. 101 .-ditto- all as per ser item No 100 above but 1000 ltrs etc. 102 S&F in repairs PVC connections 15 mm size with Brass/Stainless steel Nuts of length 600mm 103 S&F in repair for stainless steel grating without waste holes 100 mm dia 104 S&F in repair for stainless steel grating with waste holes 100 mm dia 105 S&F for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore 106 S&F in repairPVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed. 107 .-Ditto- all as per ser item No 106 above but as in trenches or floor 108 S&F in repairPVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed. 109 .-Ditto- but As in trenches or floor 110 S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed 111 S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed 112 S&F PVC (SWR) junction single, (Single T) equal or un equal110mm bore 113 S&F PVC (SWR) junction single, (Single T) equal or un equal75mm bore 114 S&F PVC (SWR) junction single, (double Y) equal or un equal110mm bore 115 S&F PVC (SWR) vent cowl110mm bore 116 S&Ffor low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/ fixed to wall 117 Supply and fix repairs 10 L PVC valveless, syphonic action type, flushing cistern, low level, all accesories all as directed. Make :- Sleek essenceseries OfHindware or Cat part No E8303 Of Parryware . 118 Taking up or down steel tubingand connections,15 mm bore 119 .-ditto- all as per ser item No 118 above but 20mm bore 120 S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessaryfittings. 121 All as per ser item No 120 above but 20mm outer dia etc 122 S&Fstandardaluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be approved by GE) as in frame,shutter for doors, windows/ ventilator, partitions, fixed/ openable/ sliding or in any pattern, cut to size, jointed with cadmium plated steel screws,including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, nylon ball bearing etc complete all as specified and directed.(Aluminium section shall be of make Jindal/Hindalco/Indalco)Note:Weight of Aluminium sections as per actual or as per IS or as per manufacturer,whichever is less,shall only be considered for payment.Cost of other items/accessories required for entire completion of the work shall be deemed to be included in the quoted rate.However glass panes and wire cloth shall be measured and paid seperately as supply only under respective items. 123 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window below 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 124 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 125 Fixing only for framed work such as guard bars/ grill /gratings etc with ends of bars shouldered and/or riveted or gorged into spikes confroming to FE-290, Gde -E- 165 126 Supply only 12mm Pre laminated boards interior grade both sides laminated complete all as specified and directed by Engineer-in-Charge 127 Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge 128 Taking down shutters of any descriptionexc 1 sqm and n exc 2 sqm each and refixing in the same opening including easing and adjusting and also refixing builders hardware as required including renewal of unservieable screws etc 129 M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain kitchen cupboard shutter of 18 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 130 S&F in repairs POP suspended ceiling using appropriate size tiles ( 10 mm thick ) support members using GI section of 26 gauge suspended by GIO holder from the slab/ beam in line and level as per design as approved finishing, cleaning and filleting side with suitable moulding, cleaning the site including taking existing etc complete all as specified and directed by Engineer-in-Charge 131 S&F Solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, inluding taking down/ out of existing wall panneling etc complete all as specified and directed by Engineer-in-Charge 132 S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing 133 S&F for in repairs Auto closing hinges 35mm of o crank (KH-001) ir 8 crank (KH=002) openable at 110 degree for kitchen cabinet shutters fixed complete as specified and directed 134 Supply and fixtubular towel rail, brass chromium plated 20 mm dia `Dtype, 60 cm long between flanges including a pair of bracketsetc complete all as specified and directed by Engineer-in-Charge 135 Supply and fix repairs PVC (SWR) floor trap, 75 mm dia with grating including jointing with slovent cementetc all as directed. 136 S&F in repair Brass Chromium Plated toiletpaper holder fixed with (CP) brass screws of approved quality. 137 S&F in repairs PVC Seat Cover with hinges complete all as specified. 138 S&F in repairs decorative towel ring recangular chromium platedfixed with (CP) brass screws of approved qualityas specified 139 S&F in Soap Dish wired type including necessary fitting material screws etc complete all as specified. 140 S&F in repairs looking mirror of size 600 mm X 450 mm etc complete all as specified and directed by Engineer-in-charge. 141 S&F in repairs corner glass shelf 200mm size 142 Demolition of cement concrete (reinforced) in ground floor and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engg-in-charge. 143 M&L for RCC M20 grade in basement slabs, under reamed piles and mass concrete complete all as specified and directed by Engg-in-charge 144 M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed to Engineer-in -charge. 145 M & L for providing water proofing treatment on roofs, as per manufactureres instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge.(a) Cleaning the newly plasterd surfaces with wire brushes and applyinga bituminous primer @ 0.30 l/sqm & surface shall be allowed to dry.(b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech 146 M&L for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement.

BRR:8657583 Tender For Repairs To Jco, Or, Civ Accommodations And Ge Office Under Ge(N) Ahilyanagar; 1 Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor and removing all rubbish/dismantled material outside MD Land. all as directed. 2 Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed. 3 M&Lfor 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stoneaggregate as in sub base all as directed. 4 M&L for Glazed colour ceramic tiles 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. 5 M&Lfor Non skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,(300x300)mm as in floor etc laid over and including screed bed 15mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. 6 M&Lfor Non skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,(400x400)mm as in floor etc laid over and including screed bed 15mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. 7 M&L for vitrified/ ceramic light shade coloured tiles8-10 mm thick as approved by GE (square /rectangular) area of each tilenot exceeding 0.36 sqm,(600 x600)mm as in floor etc laid over and including screed bed 15mm thick in cement and sand mortar (1:6 ) set and jointed with white or coloured cement to match the shade of tile etc complete all as specified and as directed 8 .-Ditto- as per ser item No 7 above but on skirting and backing coat of 10 mm thick in CM 1:4 9 M&L for Chequred cement concrete tiles with pigment 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar(1:6) etc complete all as specified and directed by Engineer-in-Charge. 10 M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge 11 M&Lfor 15-18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointingin white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed. 12 M&L for machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including15 mm thick screed bed incement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed. 13 M&L for 20 mm thick Rough dressed(shahabad) lime stone slab flooring, laid dry, jointed and pointed in cement mortar 1:3as in floor/plinth etc over bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 in floor/plinth etc over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed 14 Fixing only 20mm thick rough dressed Shahabadstone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 including dismantling complete all as specified and directed 15 M&L for heavy duty vitrified paver tiles 30cm x 30cm x 10mm thick, approved by GE withnset, jointed and pointed in neat cement slurry with grey cement and pigment to match in floors, over and including screed bed or bedding a layer of 15 mm in cement mortar 1:6 complete all as specified and directed by Engg-in-charge. 16 Demolition of plain cement concrete solid block/ stone/ brick masonary built in cement mortar & removing all rubbish/dismantled material outside MD Land all as directed. 17 M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge 18 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built incement mortar 1:6 but except stone complete all as specified and directed by Engineer-in-Charge 19 M&L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C-5 1:5:10using 20 mm graded aggregatesand setting in mortar 1:6 complete all as directed. 20 Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with waterall as directed 21 M&L for rendering, 12 mm thick on stone surfaces in cement mortar 1:6 surfaces finished even and fair finish all as specified and directed. 22 M&Lfor rendering, 10 mm thick on brick/concrete surfaces in cement mortar 1:6 surfaces finished even and fair finish all as specified and directed. 23 M&Lforrendering, 15 mm thick on stone/brick/ concrete surfaces in cement mortar 1:4 surfaces finished even and fair without using extra cement all as specified and directed. 24 M&Lfor 1 mm wall care putty on walls complete all as specified and directed by Engg-in-charge. 25 M&L for complete removal of existing treatment, washing, rubbing down and stopping od distempered and painted surface of walls and apply two coat of luster (any tint) over a layer of wall care putty & a coat of suitable primer complete all as specified and directed. 26 Dismantling of single layer manglore pattern in roofing & removing all rubbish/dismantled material outside MD Land.all as directed. 27 -ditto- all as ser item no 26 above but bedded in cement morter 28 M&L for roofing tile, manglore pattern interlocking at sides joints laid dry 29 -ditto- all as ser item no 28 above but except manlore pattern tiles. 30 M&L Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement morter 1:6 31 Dismantling timber scantling 40 sqcm and over in section, in any postion framed work as in scanging of main joist of roof & removing all rubbish/dismantled material outside MD Land. 32 -ditto- all as ser item no. 31 above in fillets, rails, posts, rafters purlins etc under 40 sqcm in section framed work & removing all rubbish/ dismantled material outside MD Land. 33 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge & removing all rubbish/dismantled material outside MD Land.all as directed. 34 M&L for second class hard wood in scantling of roof rafters, etc wrougt framed 35 S&F Pre-painted Galvalume sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. 36 Supply and fix Pre-painted 0.50mm thick plain, galvanised sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with, 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. 37 Dismantling wrought iron or mild steel work of any description not otherwise provided for 38 S&F Steel work in tubular trusses Roof trusses (framed) of section Rectangular/ square/ circular, post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 2014 and IS 4923- 2017 grade St.-240 39 M & L for filleting in any position in repairs and to any shape in cement and sand mortar (1:4) including all mitres, stops etc exc 25 Sqcm but n.exc 50 Sqcm etc complete all as specified and directed by Engineer-in-Charge. 40 Supply and fix in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges devicecomplete connecting to P or Strap all as directed. 41 Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed. 42 S&f in repair for Vitreous China bowl urinal flat back size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe ad waste pipe) 43 Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed. 44 S&F fix in repairs wash hand basin with pedestal vitreous China white, flat back or angle type of size 500 X 400 mm incl pedestral etc complete all as specified and directed by Engineer-in-Charge 45 Supply and fix in repairs ceremic table top wash hand basin vitreous China, as approved by GE, including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed. (Ceremic Cera Cat No.S2020137, Calburt and equivalent make) 46 M&L for preparing new unplastered or plastered surfaces and applying two coats of oil bound distemper including chalk whitening on wall including smooth roller finish complete all asdirected. 47 M&L for preparation of newly plastered surface of walland apply two coats of cement based paint over a coat of alkali primer any height including scaffholding etc complete all as directed. 48 M&L for preparing old unplastered or plastered surfaces and applying one coats of oil bound distemperingon walls all as directed. 49 .-ditto- all as per ser item no. 48 above above but two coat of OBD on old surface 50 M&L for complete removal of existing treatment, washing, rubbing down and stopping old distempered and apply a coat of wall care putty over the surface of walls and applying two coats of oil bound distemperingon walls all as directed. 51 M&L for preparation of old plastered or unplastered surface of walls including cornices etc by brooming down or steel wire brushing scraping down smook soot,moulds, moss and efflorescent salt,trading oil and greasy spots and apply one coats of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.. 52 .-ditto- all as per ser item No 51 above (here-in-before) but on ceiling. 53 M&L for preparing old painted surfaces of wall and applying two coats of cement based paint all as directed. 54 M&L for preparing old painted surfaces of wall and applying one coats of cement based paintall as directed. 55 M&L for preparation of old plastered treated surface of walls by brooming down and apply one coats of wheather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as directed. 56 M&L for preparation of old surfaces of wood of any description exc 10cm width/girth incl cleaning applying one coat of synthetic enamel all as specified directed by Engineer-in-charge. 57 M&L for preparation of old steel and ironsurfaces, of any description, over 10 cm width or girth not other wise described and applying one coats of synthetic enamel paint over a coat of red oxide primer 58 Taking down chowkats or framesexc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) all as directed. 59 Taking down chowkats or framesn exc 1.5 Sq m with shutters (without taking off shutters from the frames) all as directed. 60 Taking down shutters of any descriptionexc 1 sqm and n exc 2 sqm each all as specified directed by Engineer-in-charge. 61 Taking down shutters of any descriptionn exc 1 sqm each all as specified directed by Engineer-in-charge. 62 S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified. 63 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 64 S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 65 Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides 66 Supply and fix 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed. 67 Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube,all as directed. 68 Supply and fix Factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28to30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face 69 Supply and fixstainless steel wire cloth 0.36 nominal dia of wire and average width of aperture1.40 mm and fixed with tinned tacks or galvanised wire staplesall as directed. 70 Supply and fix for 3 mm thick sheet frosted/pin headed in squaresn exc 0.50 sqm in each pane 71 Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm 72 Supply and fix aluminium alloy, anodised, sliding door boltwith hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section andfixing bolts and sliding bolts of extruded section of castaluminium alloy and fixed 300mm long. 73 Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long. 74 Supply and fix aluminium anodised handles of extruded section 150mm long. 75 S&F in repair 300mm mild steel ordinary rat tail rod patteren door spring including roller and roller plate complete all as specified and directed 76 S&F in repair aluminium extruded section body door closer for aluminium door shutter hydraulically regulated, designation No 1 universal type, suitable for door shutter upto 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. 77 S&F in repair Cylindrical Latch Door Lock Tubular (Dumbell lock) stainless steel finish fixed in door complete all as specified and directed by Engg-in-charge.Make:Godrej, Europhia and equivalent. 78 S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. 79 M&Lfor two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed. 80 M&Lfor two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed. 81 Supply and fix mild Steel 20 mm dia decorative powder coatedcurtain rods with fixing brackets fixed in repairscomplete all as specified and directed. 82 Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc all as directed. 83 S&F in repair wall mixture, with provn for overhead shower all as specified and directed by Engg-In-Charge 84 M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious groutand applying 10mm thick cement plaster in CM 1:4.Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providingPCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqmetc after dismantling the existing sunken floor etc complete all as specified and directedby Engineer-in-Charge. Note :Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE. 85 Cleaning the surface with wire brush,detecting sources of lea and removing/ taking down unsound treatment/ surface, proving M&L for carrying out non-destructive water proofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor trap (combined unit) by using construction chemical method as hydrophobic PU grouting etc with first course of injection MDI based PU foam and second course of injection PU plain all as manufacturers instruction, etc, the PU foam shall have 100% solids and solvent free,and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100CPS visscosity and shore hardness minimum 50 complete all as specified and directed. Make : PIDILITE or equivalent 86 M&Lfor fixing the metallic packer for hydrophobic PU foam including making holes and sealer all as per manufacturers specification,the PU foam shall have 100 % solids and solvent free,and shall expand 30-40 times its volume at liquid stage in presence of water,the PU plain injection shall have minimum 100CPS visscosity and shore hardness minimum 50 complete all as specified and directed. Make : PIDILITE or equivalent.Note:This item is catered only for M&Lby for fixing the metallic packer 87 M&Lfor the chemical cleaning of tile joints and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/ matching colour) epoxy tile grout of M/S Pidilite, ROOF RTM epoxy or euivalent, curing, cleaning the surface etc as per the sample done at site complete all as specified and as directed. 88 M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 7-8 mm thick with washable metallized polyster foil backing with vinyle covered edges supporting sections shall be of sutable size from same makes embossed on section and level adjuster duly suspended by 2mm dia GI wire fixed to roof at 600mm center to center as per manufacturere,s instruction and all as directed Make : Armstrong or equivalent in Saint Gobin/Lafarge 89 Supply and fix in repair health faucet with 15 mm dia 1.25 m long flexible tube wall mounted / hooked including making connection and fixed in position complete all as specified and directed by Engg-in-charge 90 Supply and fixin repairbib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handlescrewed down for iron pipe or for brass ferrule all as directed. 91 Supply and fix in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore 92 Supply and fixin repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. 93 Supply and fix in repairs, shower rose with shower arm 94 Supply and fix in repairs 15 mm dia pillar tap(Swine neck), cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. 95 Supply and fix in repairs 15 mm dia pillar tap basin mixer cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. 96 Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads nexc 1.5 Sqm. 97 M&Lfor glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as directed. 98 Supply and fixin repair stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture1.40 mm and fixed with tinned tacks or galvanised wire staplesall as directed. 99 Supply andfix in repairs rotational moulded polyethylene water storage tanks Tripal layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting complete all as specified and directed. 100 .-ditto- all as per ser item No 99 above but 1000 ltrs etc. 101 S&F in repairs PVC connections 15 mm size with Brass/ Stainless steel Nuts of length 600mm 102 S&F in repair for stainless steel grating without waste holes 100 mm dia 103 S&F in repair for stainless steel grating with waste holes 100 mm dia 104 S&F for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore 105 S&F in repairPVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed. 106 .-Ditto- all as per ser item no 105 above but as in trenches or floor. 107 S&F in repairPVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed. 108 .-Ditto- all as per ser item no 107 above but As in trenches or floor 109 S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed 110 S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed 111 S&F PVC (SWR) junction single, (Single T) equal or un equal110mm bore 112 S&F PVC (SWR) junction single, (Single T) equal or un equal75mm bore 113 S&F PVC (SWR) junction single, (double Y) equal or un equal110mm bore 114 S&F PVC (SWR) vent cowl110mm bore 115 S&Ffor low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/ fixed to wall. 116 Supply and fix in repairs 10 L PVC valveless, syphonic action type, flushing cistern, low level, all accesories all as directed. Make :- Sleek essenceseries OfHindware or Cat part No E8303 Of Parryware . 117 Taking up or down steel tubingand connections,15 mm bore 118 .-ditto- all as per ser item No 117 above but 20mm bore 119 S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessaryfittings. 120 .-ditto- all as per item No 119 above but 20mm outer dia etc 121 S & Fstandardaluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be approved by GE) as in frame,shutter for doors, windows/ ventilator, partitions, fixed/ openable/ sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, nylon ball bearing etc complete all as specified and directed.(Aluminium section shall be of make Jindal/ Hindalco/ Indalco)Note:Weight of Aluminium sections as per actual or as per IS or as per manufacturer,whichever is less,shall only be considered for payment.Cost of other items/accessories required for entire completion of the work shall be deemed to be included in the quoted rate.However glass panes and wire cloth shall be measured and paid seperately as supply only under respective items. 122 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window below 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 123 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 124 Fixing only for framed work such as guard bars/ grill /gratings etc with ends of bars shouldered and/or riveted or gorged into spikes confroming to FE-290, Gde -E- 165 125 Supply only 12mm Pre laminated boards interior grade both sides laminated complete all as specified and directed by Engineer-in-Charge 126 Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge 127 Taking down shutters of any descriptionexc 1 sqm and n exc 2 sqm each and refixing in the same opening including easing and adjusting and also refixing builders hardware as required including renewal of unservieable screws etc 128 S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain kitchen cupboard shutter of 18 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 129 S&F in repairs POP suspended ceiling using appropriate size tiles (10 mm thick ) support members using GI section of 26 gauge suspended by GIO holder from the slab/ beam in line and level as per design as approved finishing, cleaning and filleting side with suitable moulding, cleaning the site including taking existing etc complete all as specified and directed by Engineer-in-Charge 130 S&F Solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, inluding taking down/ out of existing wall panneling etc complete all as specified and directed by Engineer-in-Charge 131 S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing 132 S&F for in repairs Auto closing hinges 35mm of o crank (KH-001) ir 8 crank (KH=002) openable at 110 degree for kitchen cabinet shutters fixed complete as specified and directed 133 Supply and fix in repair tubular towel rail, brass chromium plated 20 mm dia `Dtype, 60 cm long between flanges including a pair of bracketsetc complete all as specified and directed by Engineer-in-Charge 134 Supply and fix repairs PVC (SWR) floor trap, 75 mm dia with grating including jointing with slovent cementetc all as directed. 135 S&F in repair Brass Chromium Plated toiletpaper holder fixed with (CP) brass screws of approved quality. 136 S&F in repairs PVC Seat Cover with hinges complete all as specified. 137 S&F in repairs decorative towel ring recangular chromium platedfixed with (CP) brass screws of approved qualityas specified 138 S&F in repairs Soap Dish wired type including necessary fitting material screws etc complete all as specified. 139 S&F in repairs looking mirror of size 600 mm X 450 mm etc complete all as specified and directed by Engineer-in-charge. 140 S&F in repairs corner glass shelf200mm size all as directed and specified. 141 S&F in repairs for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement 142 M & L for providing water proofing treatment on roofs, as per manufactureres instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge(a) Cleaning the newly plasterd surfaces with wire brushes and applyinga bituminous primer @ 0.30 l/sqm & surface shall be allowed to dry.(b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech 143 M&Lfor plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement.

BRR:8657548 Tender For Repair, Maintenance Of Road Furniture And Allied Works At Mic And S Under Ge(S) Ahilyanagar- 1 Dismantling kota, granite, cudappah stone slabsand interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. 2 Demoltion of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified & directed. 3 M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floorall as specified and as directed. 4 M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including dismantling of existing kerb stone and making drainage opening wherever required complete. 5 Fixing only cement concrete paver block as in footpath,parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note: Old Cement Concrete Paver Blocks of any type and size retrived from dismantling shall be reused under this item. 6 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. 7 Supply and fixing in repair cat eye solar reflective type of size 100mm x 100mm x 18.5mm with PAMA striplens relector fixed with and incl MS stud of suitable size as per manufacturers instructions. Make : DA 978of Darkeye or equivalent model of makes specified. 8 S&F for road side convex mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts), ISO Certified 9001:2015, of size 800mm dia, made up of polycabronate, mounted on MS pipe of 2.1m long and dia of pipe is 80mm including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earthwork in any type of soil for fixing and embedding the MS pipe on ground with hold fasting using PCC (1:2:4) type B1 using 20mm graded aggregates (block size 0.3m x 0.3 m x 0.45m below GL) and proper grounting, complete all as specified and directed by the Engr-in-Charge. 9 S&F for road side unbreakable convex mirror / security mirror/ traffic mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts), ISO Certified 9001:2015, of size 600mm dia, made up of polycabronate, mounted on MS pipe of 2.1m long and dia of pipe is 80mm including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earthwork in any type of soil for fixing and embedding the MS pipe on ground with hold fasting using PCC (1:2:4) type B1 using 20mm graded aggregates (block size 0.3m x 0.3 m x 0.45m below GL) and proper grounting, complete all as specified and directed by the Engr-in-Charge. 10 Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to IP67) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono Crystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed.Make : DA 110 (DHRUV)of Darkeye or equivalent model of makes specified. 11 Manufacturing, supplying and fixing retro eflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. 12 S&F in repairs ABS plastic speedbump/speed breaker in parabolic convex shape and of size 730mmx245mmx70mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precoloured material (black/yellow) and UV stabilisers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorist during night hours, including PCC (1:2:4 type B1) filling in speed breakers, complete all as specified and as directed.Make : DA 1006of Darkeye or equivalent model of makes specified. 13 Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with two high performance 100mm Dia reflectors and two rectangular reflectors of 70mmx23mm are fixed on both sides of Guide Post, made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 1010 mm height duly powder coated including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.Make : DA 74of Darkeye or equivalent model of makes specified. 14 S&F Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. 15 Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50mm dia & 600 mm height duly powder coated, anti rust with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.Make : DA 952 GPof Darkeye or equivalent model of makes specified. 16 M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.0 mm thick single coat as a centre line or edge line etc, road marking n exc 100 mm width using thermo plastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturers instructions and complete as all specified and directed. 17 M&L for manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards, single side of both side visibility of size per drawing enclosed, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated rectro reflective sheeting conforming to type -IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter (any size, any number) message (bi-lingual), symbols and borders etc. as per IRC:67 2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20mm c/c to back support frame of stainless steel 304 grade round pipes mounted and fixed as per drawing enclosed, embeded in cement concrete 1:2:4 type B2 and including making holes in pipes, angle flats, providing & fixing ACP message plate of required size, back side of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat, all leads, lifts taking down existing sign boards as per drawing GE/WD/33 complete all as specified and as directed. 18 M&L for preparation of old concrete surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over priming coat complete all as specified and as directed by Engineer-in-Charge. 19 M&L for preparation of new concrete surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over priming coat complete all as specified and as directed by Engineer-in-Charge.

BRR:8657523 Tender for Maintenance Of Paver Block Passage Near D/98 Bapujinagar Etc In Wd-096,Br.X (Apas Id- Apas/01/150/234/0002)

BRR:8657404 Construction Of Paver Block Road From H/O Krishna Debnath To H/O Gour Debnath At Booth No- 100 Under Bhanukumari 1 Gp Within Tufanganjiips Id Apas010091000020

BRR:8657401 Construction Of Paver Block Road From The Ho Anil Barman To The Ho Lalchan Bhakat Under Bhanukumari-I Gram Panchayat Within Tufanganj-Ii Dev Block Fy2025 2026 Id Apas010091050001

BRR:8657400 Construction Of Paver Block Road From The H/O Bhola Barman To The H/O Kashinath Barman Under Bhanukumari-I Gram Panchayat Within Tufanganjii Dev Block Fy20252026id Apas010091050002

BRR:8657322 Tender for Maintenance Of Road/Passage With Paver Block Works At 190A Chanditala Br. Road Bye Lane In W-116.

BRR:8657011 Tender for Construction Of Paver Block Road From Near The Head Of Prafulla Barman To The Head Of Bishnu Biswas At Hokadaha Mouza Under Kishamat Dasgram Gram Panchayat

BRR:8656454 Tender 1) Repairing Of Dagadi Masjid Talav 2) Providing And Fixing Paver Block In Zp Urdu School And Marathi School 3) Construction Of Rain Water Harvesting System At Dagadwadi

BRR:8656453 Tender For 1) Repairing Of Dagadi Masjid Talav 2) Providing And Fixing Paver Block In Zp Urdu School And Marathi School 3) Construction Of Rain Water Harvesting System At Dagadwadi

BRR:8656448 Tender for Providing Paver Block (In Mahadeo Mandir Premises) At Village Mandal Tal.Shirpur Dist.Dhule

BRR:8656144 Tender For Construction Of Drain And Side Berms By Pdg. Brick Work, Plaster, Precast Rcc Slab/ Grating Rcc And Cc Paver Blocks From Qtr. No. 337 To Gurudwara To Community Centre In Sec.-6 Rk Puram In Ward No. 152/Sz.

BRR:8656143 Construction of drain and Improvement of side berm by pdg. brick work, plaster, precast RCC slab/ Grating , RCC, RMC and CC paver blocks from Gate of A Block Hill View Apartment to Rebu Saxena Marg Vasant Viharin Ward No. 153/SZ

BRR:8656142 Improvement and development of back lane, side road and berms from H.No.D.2/1 to D.2/6 and from D.2A/1 to D.2A/8 in Vasant Vihar by pdg. RMC and CC paver blocks in Ward No.153 /SZ.

BRR:8656141 Tender For Construction Of Both Side Drain, Footpath And Improvement Of Both Side Berms By Pdg. Brick Work, Plaster, Precast Rcc Slabs/Gratings, Rcc, Rmc And Cc Paver Blocks From Mother Dairy To C-D Block South Moti Bagh /Shop No.283 Via Diet, Sol Shastri Market In Vasant Vihar In Ward No.153 /Sz.

BRR:8656140 Construction of drain and side berms from H.No.77 to 82 to 87, 121 to 117 and H.No.127 to 135 in Vasant Enclave by pdg. brick work, plaster, Precast RCC slabs/gratings, RCC and CC paver blocks in Ward No.153/SZ.

BRR:8656139 Improvement and development of lanes and side berms and culvert from H.No.G.50 to G.87 to BSES Sub/Stn. ,G.32 to G.24 and C.3/13 to C.1/26 Vasant Enclave in Vasant Vihar by pdg. RMC, brick work, RCC and CC paver blocks in Ward No.153/SZ

BRR:8656137 Improvement Development of side berms from E-4/1 to E-4/9Vasant Vihar E Block and opposite E-8/8 to near E-5/1 adj. BSES sub/ Stn.by pdg. CC paver blocks in Ward No. 153/SZ

BRR:8656130 Construction Of Drain, Culvert And Imp. Of Side Berms By Pdg. Brick Work, Plaster, Precast Rcc Slabs/Gratings, Rcc And Cc Paver Blocks From Qtr. No. 1113 To Market And Adj. 277 In Sec-12 Rk Puram In Ward No. 152/Sz

BRR:8656128 Construction of drain and improvement of side berms by pdg. Brick work, plaster, precast RCC slabs/ gratings, RCC and CC paver blocks from Qtr. No. N.171/ Amar Saheed Babu Genu Marg to Qtr. No. N.203 in Sec-8 RK Puram in Ward No. 152/SZ

BRR:8656127 Tender for Residual Works Of Grill Gate And Paver Blocks In Ward No. 01 And 02 Respectively Under Amc.

BRR:8656066 Tender for Providing And Laying Of Inter Locking Paver Block Road In 3Rd Cross Street Sathiya Nagar At Seekinakuppam Panchayat In Lathur Panchayat Union. Estimate.3.000 Lakhs,15Th Finance Bp/2025-26

BRR:8656065 Tender for Providing And Laying Of Inter Iocking Paver Block Road In 3Rd Cross Street Sathiya Nagar At Seekinakuppam Panchayat In Lathur Panchayat Union

BRR:8656023 Tender For Providing And Laying Of Cc Paver Blocks At Ward 07 Near Triveri

BRR:8656008 Tender For Material Supply For Various Work Under Mgnrega - Stone Aggregate (Single size): 40mm nominal size Stone Aggregate (Single size): 20mm nominal size Stone Aggregate (Single size): 10mm nominal size Stone Aggregate (Single size): 6mm nominal size Quarry waste Stone for masonry work Coarse sand (Zone III) Portland cement Twisted steel/deformed bars Interlocking C.C. Paver block (80 mm thick, M-30) 100 mm channel shoulder 2.5 m long Wall form panel 1250x500 mm Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper Vibrator (Needle type 40mm)

BRR:8655937 Construction of drain and side berms both sides by pdg. brick work, plaster, Precast RCC slabs/gratings, RCC and CC paver blocks from Vishva Hindu Parishad to Kama Koti Marg via MCD Library, CGHS Dispensary and Mother Dairy in Sec.6 R. K. Puram in Ward No.152 /SZ.

BRR:8655936 improvement/ Development Of Back Lane By Pdg. Cc Paver Blocks From Ba14 To Bb1 And Ba9 To Ba13 And Back Lane Of E1 To E7 Along Ith Park Dda Flats Munirka W. No. 151/Sz

BRR:8655935 Construction of drain side berms by pdg. Brick work plaster, precast RCC slab/gratings RCC and CC paver blocks from Qtr. No. 63 to 45 in Sector 7 RK Puram in Ward No. 152/SZ

BRR:8655934 Construction of bot side berm by pdg. CC paver blocks from Gate No.2 to Qtr. No. 17 T-Point in Sector 5 R.K. Puram in Ward No. 152/SZ

BRR:8655933 Tender For Construction Of Both Side Berm By Pdg. Cc Paver Blocks From Cpwd Gate / Jose Martin School To Kaifi Azmi Marg Sector 12 Rk Puram In Ward No. 152/Sz.

BRR:8655932 Construction of drain and side berms by pdg. Brick work, plaster, precast RCC slab/grating, RCC and CC Paver blocks from Qtr. No. 79 to Market Gate in Sec.-6 R.K. Puram in Ward No.152/SZ.

BRR:8655930 Construction of both side drain and side berms vby pdg. Brick work, plaster, precast RCC slab/ grating, RCC and CC paver blocks from Qtr. No. 666 to Gate No.1 and Qtr. No. 389 to Qtr. No. 398 in Sector 7 RK puram in Ward No. 152/SZ

BRR:8655929 Construction of drain, side berms and road by pdg. brick work, plaster, Precast RCC slab/grating, RCC, RMC and CC paver blocks from New Aggarwal Sweet to Mother Dairy alongwith market Sec.-8 R.K. Puram in Ward No. 152/SZ.

BRR:8655928 Construction of drain and both side berms by pdg. Brick work, plaster, precast RCC slabs/ gratings, RCC and CC paver blocks from MC Pry. School to Gate No. 10 via Hope Hall School in Sec-7 RK Puram in Ward No. 152/SZ.

BRR:8655927 Tender For Construction Of Drain, Side Berms, Road And Fooptpath By Pdg. Brick Work, Plaster, Precast Rcc Slabs/Gratings, Rcc, Rmc And Cc Paver Blocks From Rock Garden To Kameshwar Mandir In Sec.7 R. K. Puram In Ward No.152 /Sz.

BRR:8654665 Improvement Development of drain and side berms by pdg. Brick work, Plaster, Precast RCC Slab/Gratings and CC Paver blocks from Nanakpura Market to T-point Benito Juarez Marg and from H.125 to H.31 and F.301 to F.43 in Nanakpurain Ward No.153/SZ.

BRR:8654664 Tender For Construction Of Drain And Side Berms By Pdg. Brick Work, Plaster, Precast Rcc Slabs/Gratings, Rcc And Cc Paver Blocks From H.No.D-27 To D-44 Hauz Khas In Ward No.148 /Sz.

BRR:8654658 Tender for Construction Of Paver Block Road From Teko Mahto Boumdary To Chetlal Mahto And Chandrshekhar Mahto House In Bail Gali Chandramarni Under Badki Saraiya Nagar Panchayat, Suriya, Dist-Giridih

BRR:8654657 Tender for Construction Of Paver Block Road From Ashok Mandal House To Raju Kushwaha House In Chandramarni Under Badki Saraiya Nagar Panchayat, Suriya, Dist-Giridih

BRR:8654653 Tender for Construction Of Paver Block Road From Pryag Thakur House To Main Road Under Badki Saraiya Nagar Panchayat, Suriya, Dist-Giridih

BRR:8654651 Tender for Construction Of Paver Block Road From Manoj Gupta House To Sulochani Sewa Sadan In Gali No-04 Under Badki Saraiya Nagar Panchayat, Suriya, Dist-Giridih

BRR:8654623 Construction Of Paver Block Road At Vedanar Street In T Athipakkam Panchayat

BRR:8654530 Repairing Of Bustee Ips And Paver Block Passages At 1/7A/15, 1/7A/19 Etc Jk Ghosh Road And Other Bustee Areas In Ward No-003, Under Br-I

BRR:8654212 Tender for Repairing Paver Block Passage With Allied Works At O-131, Dewan Bagan Lane In Ward No-136, Br-Xv

BRR:8654194 Tender for Repairing Of Paver Block Passage With Allied Works At Sardar Para,Methor Para Etc Near Premises No J106/A,J97,J112 Etc In Ward No-133, Br Xv

BRR:8653169 Construction Of Paver Block Road Near Darbar Line And Shiv Nagar East Plant Basti Burmamines Under Jnac Jamshedpur In East Singhbhum District

BRR:8652697 Tender for Providing Paver Block At Ward No.10 New Library Front Area In Vadakkanandal Town Panchayat.

BRR:8652628 Tender For Construction of 12 mtr wide service road in front of SCO No 100 at commercial belt along Ambala road in sector 20 UE Kaithal Prov and laying of GSB and 80mm thick interlocking paver block complete in all respect and all other works contingent thereto including three year mtc/ defect liability period free of costAC Rs 19.22 Lacs

BRR:8652491 Nabard Ridf Xxvi Construction Works Of Tissue Culture Lab At Neriamangalam In Ernakulam District At Civil Works Phase Ii Hardening Unit (Primary And Secondary) Irrigation System For Hardening Unit Compound Wall Laying Of Paver Blocks Entrance Gate And Security Cabin Provision For Open Well And Water Supply

BRR:8652409 Tender For Providing /Fixing Paver Block By Leveling The Prati Kedarnath Mandir Tekdi

BRR:8652347 Tender for Supply Of Material For The Construction Of Z.P. School Block At. Dhanora Fasi, Tq. Nandgaon Kh., Dist. Amravati. , Materials List , Supply Of 80 Mm Metal , Supply Of 40 Mm Metal (Hand Brocken) , Supply Of 20/12 Mm Metal (Crusher) , Supply Of Steel 16/12/10/8 Mm Dia , Supply Of Murum (Hard & Soft) , Supply Of Sand , Supply Of Sliding Windows , Supply Of Bainding Wire , Supply Of Cement , Supply Of Bricks , Supply Of Door , Supply Of Vertified Tiles Floor , Supply Of Vertified Tiles Dado , Supply Of Cpvc Pipe 110 Mm , Supply Of Upvc Pipe 75 Mm , Supply Of Steel Sink , Supply Of Plastic Paint , Providing Hand Wash Basing , Providing Water Tank , Providing W.C. Eartheware , Supply Of Paver Block , Providing Strctural Steel Grill , Providing Kadappa , Supply Of Pvc Pipe 25 Mm , Supply Of Pvc Pipe 15 Mm

BRR:8652328 Tender For Repair To Area Drainage, Path, Interlocking Tiles And Certain Misc Repairs In Firing Range In Tech Area And Provn Of Sand Filling/Sga At Af Stn Naliya; 1 Demolition ofcement concrete in ground floor and pavings not exceeding 15cm thick below or above ground level and removing demolised material out of Military station complete all as specified and directed. 2 Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed complete all as specified and directed. 3 Material and labour for 75 mm thick PCC (1:4:8), type D-2 (using 40mm graded aggreate) as in sub -floors, sub- bases, floors and pavings omplete all as specified and directed. 4 Material and labour for sand filling under floors in foundations and for laying interlocking paver blocks including watering and consolidation complete all as specified and directed. 5 Material and labour for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement &pigment complete all as specified and directed. 6 Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 7 Demolition of brick work or PCC blocks/stone masonary built in cement mortar complete all as specified and directed. 8 Material and labour fo pre-cast cement concrete (1:3:6), type C-1 (using 20mm graded crushed stone aggregate)as in block masonery exceeding 10cm in width with solid block masonery with solid blocks, exceeding 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. 9 Material and labour for PCC (1:2:4), type B-1(using 20mm graded aggregate) as in surface channels complete all as specified and directed. 10 Extra for forming fair finished drain or channel upto 45cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end complete all as specified and directed. 11 Material and labour for cement concrete (1:3:6), type C1 (20mm graded aggregate) as in foundation of drain complete all as specified and as directed. 12 Supply and fix 110mm bore PVC (SWR) pipes for providing weep holes in drain wall complete all as specified and directed. 13 Material and labour for 75 mmthick PCC (1:3:6), type C-2 (using 20mm graded aggregate) as in floors, plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and directed. 14 Material and labour for 100 mm thick PCC (1:3:6), type C-2 (using 20mm graded aggregate) as in floors, plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and directed. 15 Material and labour for forming contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection and similar work, filled with sealing compound Grade A in plinth protection complete all as specified and directed. 16 Material and labour for forming construction joints 30 mm deep x 10mm wide for hardstanding & similar work , filled with sealing compound Grade A complete all as specified and as directed by engr-in-charge. 17 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition),complete all as specified and directed. 18 Material and labour for precast cement concrete (1:3:6), type C1(using 20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed. 19 Material and labour for mild steel TMT bars10mm dia and over, cut length, bent to shape required , includingcranking , bending spirallyfor hoopingfor coloumns, hooking endsand binding with and includingmild steel wire (annealed) not less than0.9mm dia or securing with clips complete all as specified and as directed. 20 All as per serial item No 19.00 here-in-before but 6 to 8mm dia . 21 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. 22 Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed. 23 Supply only integral water proofing compound complete all as specified and directed. 24 Material and labour for cement concrete (1:2:4 ), type B0(12.5mm grade aggregate ) in copings, kneelers,apex stons, kerbs etc including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. 25 Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. 26 Supply anf fix framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 27 Supply and fix hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh ) including all necessary drilling, bolting or riveting and similar work conforming to Fe-290complete all as specified and directed. 28 Supply and fix welded steel wire fabric (Weight not exceeding 4 kg per Sqm) supplied and fixed complete to wood or steel members complete all as specified and directed. 29 Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 30 Rough excavation from the firing range earthen wall upto the 6.00 Metre height and getting out any type of soil/sand complete all as specified and directed. 31 Material and labour for filling of mixed material (one part saw dust + one part river sand in volumentry) in embankment upto 6.00 metre height and thickness 0.30 Metre to 0.45 Metre mannually etc complete and directed.Note :- River sand should be passed through 2.36 mm IS seive and retained on 600 micron IS seive. 32 Removal of unserviceable sand/waste/dust distance exceeding 1.5 Km but not exceeding 5 Km and depositing in the low laying area where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. 33 Material and labour for taking down broken sand bag of 50 kg from range area and refilling of sand with new bag of 50 kg sand and staking the bag complete all as specified and directed. 34 Excavation over areas by mechanical means (Hydraulic excavator) exceeding 30 cm in depth, 1.5 metre in width as well as 10 sqm on plan in loose soil i.e sandincluding getting out and disposal of excavated sand lead upto 50 metre and lift upto 1.5 metre,complete all as specified and directed. 35 Removing excavated material exceeding 50 metre and not exceeding 100 metre and depositing/staking where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed. 36 Labour for seiving the excavated sand from Item number 34.00 above of size 100 %passing through 2.36 mm IS Sieve and 100% retained on 600 micron IS sieve and stacking the serviceable sand and unserviceable sand complete all as specified and directed. 37 Removing the seived sand( size 100 %passing through 2.36 mm IS Sieve and 100% retained on 600 micron IS sieve)from stacked to 100m lead i.e up to SGA ground as per item number 36.00 above and filling in SGA area , laid in layers not exceeding 15 cm thick , spread, levelled and rammed, watering includingploughing, complete all as specified and directed. 38 Supply and filling ofriver sand of size 100 %passing through 2.36 mm IS Sieve and 100% retained on 600 micron IS sieve and filling in SGA area , laid in layers n. exc 15 cm thick , spread, levelled and rammed, watering includingploughing, complete all as specified and directed. 39 Removal of unserviceable sand/waste obtained after screening /sieving from item number 35.00 above out side MD land, complete all as specified and directed.Note :- Wherever the contractor dumps the unserviceable material, it will be the contractor responsibility.

BRR:8652312 Tender For Misc Repairs To Foothpath, Hard Standing And Paver Blocks At Nsry, Navccc, Cdu Under Ge Haddo, Sri Vijaya Puram; 1 U/S old PCC block Cum 25.00 150.00 3750.00 2 Old U/S rolling Shutter any size Sqm 40.00 50.00 2000.00 3 Old U/S Collapsible Gate any size Kg 5.00 50.00 250.00 4 U/S old scrap steel Sqm 1122.00 15.00 16830.00 5 U/S old steel sheet Sqm 304.00 25.00 7600.00

BRR:8652298 Tender For Provision Of Covered Bus Shelter And Certain B/R Works At Icgs Karaikal Under Ge (I) (Cg) Chennai; 1 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft/loose soil complete all as specified and as directed. 2 Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. 3 S & F MS steel work in tubular trusses and tubular posts including special shaped washersetc., complete using ERW or induction butt welded tubesconforming to I.S.I 1161-1998 Grade St-240 withone shop coat of zinc chromate primer paint complete all as specified and as directed. 4 S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming toFe-410-W(Gde- E-250) quality- B complete all as specified and as directed. 5 S&F Mild steel screw bolts(machine made) with hexagonal or square heads at one end andscrewed the other, orscrewed both ends, eachscrewed end to be fitted with washers and one hexagonal or square nut,but length of bolt exc 10cm and n exc 15cm long dia of shank 11to 15mm complete all as specified and as directed. 6 S & F pre-paintedgalvalume aluminium zinc coating GI basedcorrugatedsteel sheet 0.50mm thick of an colour havingtensilestrengthof 550 Mpaas inroofcovering/ cladding to wall, fixedwithselftappingscrewscomplete all as specified and as directed. 7 S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 8 S& F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed. 9 M&L for preparing surfaces of steel and iron work of new surface of any description over 10 cm width or grithnot otherwise described applying two coats ofsynthetic enamel paint all complete all as specified and as directed. 10 S&F posts and struts in fencing including cutting tops to shape as directed, in Angle drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. 11 M&L Mild steel in flat, round or squae bars, in available lenth Fe-410-W (Gde-E-250) quality A complete all as specified and as directed. 12 S&Fmild steel screw bolt (machine made )with hexagonal ar square head at one end and screwed the other or screwed both end , each screwed end to be fittedwith washers and one hexagonal or square ut length of bolt n.exc 5 cmlong and dia 5 to 10mm complete all as specified and as directed. 13 Supply only PVC coated Chain link fencing with steel wire chain link fencing any size or type complete all as specified and as directed. 14 Fixing only PVC Coatedchain link fencing including line wires any mesh size and type of standerds, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. 15 M&L for Mild steel Round bars 10 mm dia., and over cut to length,for securing chain link fencingcomplete all as specified and as directed. 16 Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft soil complete all as specified and as directed. 17 M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. 18 M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in cement mortar 1:6 complete all as specified and as directed. 19 Returning, filling in foundation/trenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft loose soil complete all as specified and as directed. 20 Removing excavated soils n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed. 21 M&L for 15mm thick rendering in CM (1:6) on fair surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all as specified and as directed. 22 Preparation of new plastered wall surfacesand applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and as directed. 23 M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. 24 Excavating over areas, n exc 1.5 m deep and getting outin soft soil/loose complete all as specified and as directed. 25 M&L for broken stone or boulders of Hardcore of guage n.exc 63 mm, depositted, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed. 26 M and L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate as in sub base of flooring/ hard standing complete all as specified and as directed. 27 M&L 300 mmx 300 mm x 22-25 mm thick chequered cement concrete tile with rubber moulded, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors incl, complete all as specified and as directed. 28 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. 29 Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed. 30 S & F Multiplay Junior withSingle Tower,1 LLDPE Roof,1 LLDPE Double Slide,1 Staircase Steps,1 Entry Gate,Attached Double Swing & Loop Ring Climber etc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and as specified and as directed. 31 S & F Animal Arch Swing with60mm Pipes ,7ft Height, 10ft Width, Stainless Steel Chain & LLDPE Animal Seats etc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 32 S & F Circle Swing Deluxe 75*75mm Pipe Frame ,6ft Height, 6ft Width, Circle Made Of 25mm Pipes With Aluminium Seatsetc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 33 S&F Double Seesaw Chair Seats 7ft Long Seesaw With Chair Seats With 6ft*2ft Stand 60mm,25mm Pipesetc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 34 S&F Animal Merry Go Round, 60mm Center pipe with double bearings, 42mm support pipe 5ft Dia, 3ft Height 4 LLDPE Animal Seatsetc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 35 S&F Jungle Gym 42mm Side pipe 25mm Main pipes, 6ft Height, 5*5ftetc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 36 S &F Monkey Bar 60mm main pipe with 42mm ladder pipes 8ft Height, 8ft Length etc including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 37 S & F Horse Spring Rideonincluding necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 38 S&F Duck Spring Rideon including necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 39 S&F Tiger Rideonincluding necessary fixing arrangements on ground with MS bolts and nuts and concrete foundations and manufactures instructions leveling ground all as shown on drawing and all as specified and as directed. 40 M&L point wiring complete with 1.5 Sqmm single core multi- strandedcopper conductor PVC insulated and sheathed fire retardant cable 1100 volts grade, IS-694 (ISI marked) drawn through and including PVC conduit medium grade 20 mm dia including wooden gutties clamps etc fixed on walls/ceiling etc including shunk type pressed steel terminal boxes with 3.00 mm thick insulated laminated sheet/hylem top covers on walls/box including 1.5 Sqmm PVC insulated sheathed fire retardant cable 1100 volts grade with multi stranded copper conductors earth continuity conductor to common earth and connected to earth dolly for the following :- 41 (a) One light point/fan point/ exhaust fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and as directed. 42 (b) All as per item No. 4(b) but on the same board with other switches/socket. 43 S & F Switch piano, flush type, white / ivory finish,5/6 amps, single pole, one way complete all as specified and as directed. 44 M&L switch socket combination, 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed. 45 S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and as directed. 46 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 47 S&F MCB DB sheet metal enclosure for DB, SPN, 8 way having protection IP-43, with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCBs and isolators, complete all as specified and as directed.Make-Legrand Cat No. 607711 or equivalent of MDS/ABB/Scnieder 48 S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection IP-43, with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCBs and isolators, complete all as specified and as directed.Make-Legrand Cat No. 607711 or equivalent of MDS/ABB/Scnieder 49 S&F MCB SPN, 240 volts, 30 to 60 amps, 10KA ‘B’ series complete all as specified and directed. 50 S&F MCB SP, 240 volts, 6 to 30 amp, 10 KA‘B’ series complete all as specified and as directed. 51 S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductordrawn through with & includingconcealed conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and as directed.

BRR:8652088 Tiruvannamalai City Municipal Corporation Providing Additional Facilities Includes Paver Block Arrangements, Front, Portico, Providing Ss Hand Rail, Electrical Works, Plumbing Works Etc. At Chengam Road Opp. Gh In Tiruvannamalai City Municipal Corpor Providing Additional Facilities Includes Paver Block Arrangements, Front, Portico, Providing Ss Hand Rail, Electrical Works, Plumbing Works Etc. At Chengam Road Opp. Gh In Tiruvannamalai City Municipal Corporation.

BRR:8652083 Revenue Fund 2025-26 Construction Of Storm Water Drain And Providing Paver Block Road At Elumalayan Street At W No 11 In Karaikudi City Municipal Corporation

BRR:8652082 Revenue Fund 2025-26 Providing Paver Block Road At Ward No.11, Servar Oorani Cross Streets In Karaikudi City Municipal Corporation.

BRR:8652075 Tender for Repair And Renovation Of Toilet Building And Providing Paver Block In Venkateswara West Side Park In Ward No 08.

BRR:8652044 Tender for Providing Paver Block At Ward No.1 Jeeva Nagar 3 Cross,Jeeva Nagar 11 Cross, Jeeva Nagar 12 Cross,Jeeva Nagar 13 Cross,Ward No.3 Anna Nagar 11 Cross,Nehru Nagar 10 Cross Street,Nehru Nagar 5 Cross Street,Ward No.5 Rayakottai Road 3 Cross,Rayakottai Road 6 Cross,Rayakottai Road 5 Cross,Rayakottai Road 8 Cross And S.R.M Mahal Road Ganesh Colony In Kelamangalam Town Panchayat

BRR:8652043 Tender for Providing Paver Block Road At Ward No:1 Thandiyapanur Town Panchayat Bitumen Road To Electrician Vishvanathan House In Uthangarai Town Panchayat

BRR:8651450 Construction work of pavers blocks and boundary wall in the courtyard of water tank in village Khanwar

BRR:8651022 Tender for Work.1.Repairs To Anganwadi Buillding No.1 No.2 And No.3 At Borisawant Tq Basmath Dist Hingoli Work.2. Construction Of Paver Block Road At Borisawant Tq Basmath Dist Hingoli

BRR:8650995 Tender For Special Repair To Or Md Accn Bldg No P-03 (01 To 08) Of 116 Engr Egt Under Ge (East) Bareilly; 1 Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 2 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 3 Dismantling of stone slabs and tiles of any description or thickness in floors ,aprons laid,bedded and jointed in any mortar etc complete all as specified and directed. 4 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove. complete all as specified and directed. 5 Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed. 6 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 7 Demolition ofunreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. 8 Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 9 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 10 Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. 11 Taking down shutter and refixing with easing in same openingof any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed. 12 Dismantling of 100mm bore cast iron/ pvcdrain pipe alongwith fittings and accessoriesjointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. 13 Taking down eaves gutters and rainwater pipes 75 mm dia, including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 14 Taking up or down15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 15 Taking up or down20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 16 Dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and directed. 17 M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed . 18 M&L for 25 mm thick PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in floors to receive surface of tiles complete all as specified and directed. 19 M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 20 M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 21 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 22 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 23 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 24 M&L for 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. 25 M&L for machine cut pre- polished kota stone slab flooring 20-25 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface complete all as specified and directed 26 M&L for 20-25 mm thick Machine cut pre- polished kota stone slab as in riser and steps, skirting in full length in single peice without joint, with groove cutting in double line of stair width laidover cement screed and jointed with rubbing and treating the surface incl bull nosing complete all as specified and directed. 27 M&L 20 mm thick granite of black colour(tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. 28 M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. 29 M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) (nominal mix) as in slabs supported on wall ,landing, balconies, shelves and like including bonding agent complete all as specified and directed. 30 M&L for form work to chajja, slab ,weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat complete all as specified and directed. 31 M&L for form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. 32 S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia complete all as specified and directed. 33 M&L for PCC 1:5:10 type E-2 (40 mm graded stone aggregate) as sunken base of floor fillings complete all as specified and directed. 34 S&F 32 mm dia GI pipe, medium grade as in spout pipe in suken floor complete all as specified and directed. 35 M&L for brick work with fly ash old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. 36 M&L for rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. 37 M&L for 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick masonaryfinishedeven and smooth without using extra cement with using water proofing liquid @ 0.15 Ltr per bag of cement complete all as specified and directed. 38 M&L for rendering 10 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. 39 M&L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed. 40 M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as specified and directed. 41 M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 0.15 Ltr per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately) 42 S&F APP polymeric water proofing membrane, minimum 3mm thick and weighing above 3.0 Kg/Sqm with rich bitumen and select polymers blended to obtain excellent heat resistant& cold resistant , black finish reinforced with non-wovenpolyester matt, with a thermo fusable finish laid over compatible bitumen primer torching overlaps with a propane or a butane gas torch, with a overlap of 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions completed including removal of existing treatment all as specified and as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii)The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv)In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen 43 M&L for cool roof antislip tiles 300x300x10 mm with high SRI value not less than 90 laid over existing treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. 44 M&L for WPT in sunken floors as described here under:-(i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 4mm thick and weighing above 4.0 Kg/Sqm of membrane with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant by Water proofing liquid as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall beat the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instructionsincluding preparation of surface by removing the existing treatment, complete all as specified an as directedNote :-(i) Polymeric membrane shall belaid in sunken floor and on sides up to finished floor level.(ii)The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii)Supply only water proofing liquid shall be measured and paid seperately 45 Supply only Integral water proofing Liquid complete all as specified and directed. 46 S&F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 47 S&F 40 mm thick factory madeflush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . 48 S&F 35mm thick 2nd class factory made Glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 49 S&F 150 mm long Floor door stopper ofaluminium alloy body and tongue with hard drawn steel spring. fixed in floor complete all as spd and directed. 50 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing. 51 S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 52 S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 complete all as specified and directed. 53 S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 54 S&F Powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :45.2x35mm X 1.15 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.(iii) Aluminium beading - 0.7mm thick(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 55 S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i)frame :45.2mm x35mm X 1.15 mm(ii) Aluminium beading - 0.7mm thick(iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.(iv) Aluminium neccessary fittings complete as required.(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 56 S&F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48mm thick fixed with 3 mm thick aluminium composite panel into the wall for kithen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging , design as per site requirements basis, complete all neccessary fitting complete all as specified and directed. 57 S&F 18 mm thick imported wooden medium density fibreboard fixed with frame incl hold fast ( as in shutter incl knob in each shutter) etc includingmagnet catcher built in cup board with allnecessary fittings complete all as specified and directed. 58 S&F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified and directed. 59 S&F 200 mm longStainless Steel glossy finish handles withSS screw complete all as specified and directed. 60 S&F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 61 S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 62 S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. 63 S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed. 64 S&F 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller platewelded to mild steel frame.fixed complete all as specified and directed. 65 S&F 300 mm long aluminiumsliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed 66 S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed 67 S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 68 S&F15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. 69 S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 70 S&F in repair vitreous china coloured wash hand basin with pedestalofsize 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specified and directed. 71 S&F 15 mm bore dia of pipe brass chromium platedwall mixer 2 in 1 for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. 72 S&F in repair fancy type 15mm bore dia of pipe chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as specified and directed. 73 S&F in repair fancy type 150mm size square brass CP shower rose complete all as specified and directed. 74 S&F in repair 15 mm bore dia of pipe bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed. 75 S&F fancy type chromium plated brass two way bib cocksuitable for 15mm bore pipe complete all as specified and directed. 76 S&F in repair tubular towel ringincluding apair ofCP brass bracket complete all as specified and directed. 77 S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. 78 S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 79 S&F in repair 15 mm bore dia of pipe fancy type chromium plated brass angle valve complete all as specified and directed. 80 S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. 81 S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 82 S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed. 83 S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed. 84 S&F in repair PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed . 85 S&F brass CP health faucetwith 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hookscrewecd for iron pipe fancy type long body complete all as specified and directed. 86 S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. 87 S&FPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed. 88 S&FPVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fittingcomplete all as specified and directed. 89 S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. 90 S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed. 91 S&F PVC (SWR) 75 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 92 S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 93 S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers complete all as specified and directed. 94 S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. 95 S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack complete all as specified and directed. 96 S&F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mmundermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings complete all as specified and directed. 97 S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy typedroppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed. 98 S&F rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed. 99 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 100 M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and directed. 101 Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for thesurfaces complete all as specified and directed. 102 S&F 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, stucco embossed finish withfixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart gap to be with thermocol sheetincluding dismantling complete all as specified and directed. 103 M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified and directed. 104 M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed. 105 M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferenttint and applying one coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed. 106 M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropirate grit to make surface clean,free from dust ,loose paintetc by skilled labourand applying oftwo coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats ofwall care puttyof 1 mmthickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Note:- Application to be done through authorised dealer . 107 M&L for praparing newly plastered surface and applying two coats of dust resistant and anti algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed. 108 M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats ofwall care puttyof 1 mmthickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Note:- Application to be done through authorised dealer. 109 M&L for complete removal of existing treatment on surface of wall including cleaning the surface throughly by using wire brushes and removing used materials from the surface and applying two coats of dust resistant and anti algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed. 110 M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 111 M&L for complete removal of existing treatment on ceiling,etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats ofwhite wash complete all as specified and directed. 112 M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base floor/ paving complete all as specified and directed. 113 M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. 114 M&L forcement concrete coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. 115 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 116 Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing allretrieved materials toMES storesfor segregation of serviceable /Unserviceable fitting & fixture and also making good disturbed surfaces of wall, floors etc complete all as specified and directed. 117 M&L concealed point wiring complete for one light point or one fan point controlled by one way switch with single core FRLSH PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through &including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed Modular metal flush box of suitable size flush within wall surface, suitable for fixing of Modular cover plate, switches / sockets etc, complete all as specified and directed for the following :-Note : 1. Modular white cover plate shall be measured and paid separately2. Rate quoted shall deemed to be inclusive of Metal flush box, cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. 118 All as per item No 117 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and directed. 119 All as per item No 117 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and directed. 120 All as per item No 117 above, but for one bell/ buzzer point controlled by one push button on the same board with other switches or independent board complete all as specified and directed. 121 All as per serial item No 117 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and directed. 122 S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as specified and directed. 123 S&F Modular Socket 6 A, 2/3 Pin 2 Module size complete all as specified and directed. 124 S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as specified and directed. 125 S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as specified and directed. 126 S&F Modular white cover plate with frame, 3 Module size complete all as specified and directed. 127 S&F Modular white cover plate with frame,4 Module size complete all as specified and directed. 128 S&F Modular white cover plate with frame, 6 Module size complete all as specified and directed. 129 S&F modular fan regulator step type complete all specified and directed. 130 S&F modular bell push 6A 1 module complete all specified and directed. 131 S&F electric call bell ding dong AC 230 volts single pole complete all specified and directed. 132 S&F angular lamp holder, metal cased body of brass with back plate built in batten fittings, including plastic square box of required size complete all specified and directed. 133 S&F LED bulb 9 watt complete all specified and directed. 134 S&F ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and directed. 135 S&FLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 136 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 137 S&F LED light fitting 1x9W/ 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. 138 S&F in replacement LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and including making all electric connection and including bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed. 139 Ttaking down MCB distribution board with MCCB/ MCB of any size and capacity complete all as specified and directed. 140 S&F sheet metal enclosure double door shutter type for DBs 240 Volts single pole and neutral 8 ways 200 amp rated bus bar complete all as specified and directed. 141 S&F SPN 40 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 142 S&F SP 5 to 32 amp rating 240V, 10KA B curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 143 S&F VTPN DB 6 way double door type including MCCB TP 63 Amps as incomer complete all as specified and directed. 144 Taking down submain wiring of size 4/ 6 sqmm complete all as specified and directed. 145 M&L for concealed sub main wiring with 2 runs of 6 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 25 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. incl taking out old wiring and conduitNote : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates.2. The two 2 runs of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit. 146 M&L for concealed sub main wiring with 2 runs of 4 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 25 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. incl taking out old wiring and conduitNote : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates.2. The two 2 runs of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit. 147 M&L for earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanized ironearth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 5 of SSR 2009 Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion complete all as specified and directed. 148 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm includingtaking down old fan and deposit to MES stone complete all as specified and directed. 149 S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. 150 Taking down the old serviceable electric meter 8 Nos and keeping in safe custody including refixing the same including electric wire, flexible pipe and PVC conduit from DB to meter and fixing accessories including sheet metal eclosure made of CRCA sheet 2 mm thickhaving locking arrangement duly painted with two coats of super enamelled paint over a coat of red oxide suitable for mounting on wall and housing 4 Nos electirc meter and 01 No VTPN DB complete all as specified and directed. 151 S&F in replacement DBOX MCB protected socket plastic base dimension 415 x 375 x 225 mm 4 module raise neutral link complete with one single pole MCB 20 Amp C series 240 voltscomplete all as specified and directed. 152 Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed. 153 M&L for painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and including hanging ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

BRR:8650994 Tender For Term Contract For Artificers Work At Icgs Gandhinagar Under Ge (I) Cg Porbandar; 1 Concrete work and related items 5% 2 Brick work/ stone masonry and related item 10% 3 Woodwork, Joinery & Builders hardware & Painting & Glazing 9% 4 Steel and iron work 6% 5 Roofing 10% 6 Ceiling 6% 7 Flooring 24% 8 Plastering & white washing colour wash distempering painting 12% 9 Water supply and sanitary items 8% 10 Misc items (Not covered above) 10% 1. Material & Labour for Porbandar stone masonry class A1 well bonded and bedded in Cement Mortar (1:6) all as specified. 01 Cum 6000.00 2. Servicing existing steel rolling shutter by greasing etc and made functional with fully satisfaction. 02 Each 500.00 3. Supply only PVC coated hexagonal GI wire mesh four mm thick wires any size, 100 mm aperture or any size as directed, green color as in fencing. 03 Sqm 400.00 4. Material & Labour for two coats of anticorrosive Epoxy Paint over a coat of primer on steel & iron surfaces over 10cm width or girth including preparation of new surfaces. 04 Sqm 180.00 5. Supply & Fixing 150 x 150mm stainless steel grating. 05 Each 200.00 6. Supply & Fixing stainless steel butt hinges 100mm size with ISI marking. 06 Each 88.00 7. Supply & Fixing stainless steel butt hinges 75mm size with ISI marking. 07 Each 82.00 8. Supply & Fixing Stainless steel curtain rod with SS brackets 25mm dia as specified and as directed. 08 Rm 200.00 9. Supply & Fixing Steel powder coated finial for curtain rod 09 Pair 235.00 10. Supply & Fixing aluminum grill of any type with necessary channels and clips. 10 Sqm 920.00 11 Supply & Fixing wall bracket of steel powder coated for curtain rod. 11 Pair 53.79 12 Supply & Fixing PVC flexible pipe 32 mm dia. with PVC cup as drain out pipe from WHB/sink/urinal etc. 12 Each 80.00 13 Supply & Fixing Rubber gasket of size 50 mm x 6 mm aluminum door, window and partition wall for fixing glass panes or Pre-laminated particle board etc. complete all as specified and as directed. 13 Rm 54.81 14 Supply & Fixing roller for Fabricated Aluminum anodized doors, windows, partitions and ventilators complete all as specified and as directed. 14 Each 20.00 15 Supply only Kitchen Plate rack of stainless steel 1mm thick of size 60x 90 cm with suitable shelves/rack complete all as specified and directed. 15 Each 4000.00 16 Parking Endura ceramic tiles 10mm-12mm thick size not exceeding 600x600mm as specified and directed. 16 Sqm 900.00 17 Taking down toughen glass of thickness 10-12mm of size not exceeding 2-4Sqm with fitting and replacement of unserviceable floor door spring with new one for door size of 40-80 Kg, making good the undisturbed floor of same specification and re-fixing the door in same opening complete all as specified and directed. 17 Each 7000.00 18 S&F in repair single piece EWC of minimum dimensions 600x350x700 mm with seat cover, flushing cistern fitting, fixing accessories, S/P trap complete as specified and as directed by Engineerin-charge 18 Each 14000.00 19 S&F in repair Counter top WHB oval type having suitable size min 460x335x195mm with waste coupling waste pipe and connected accessories as specified and as directed. 19 Each 4000.00 20 S&F in repair Looking mirror size 5.5mm thick with or without decorative bedding including all accessories as specified and as directed by Engineer in charge. 20 Sqm 1500.00 21 S&F in repair PVC tank lid for tank having capacity upto 500 Ltr with or without hinges as specified and as directed. 21 Each 100.00 22 S&F in repair PVC tank lid for tank having capacity upto 1000 Ltr with or without hinges as specified and as directed. 22 Each 125.00 23 Supply and fixing Wall Mixer 3 in 1 with provision for overhead shower and hand shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, complete all as specified and directed by Engineer-in-charge. 23 Each 6000 1. Old unserviceable chowkhat or frame not exceed 1.50 Sqm each with shutter and builders hardware of any description. Each 175.00 2. Old unserviceable chowkhat of frame exceed 1.50 Sqm and not exceed 4.00 Sqm with shutter and builders hardware of any description Each 250.00 3. Old unserviceable Shutter of any description not exceed 1.0 Sqm including builders hardware Each Leaf 60.00 4. Old unserviceable Shutter of any description not exc 1.0 Sqm and n exc 2.00 Sqm including builders hardware Each 100.00 5. Old unserviceable Shutter of any description exceed 2.0 Sqm each with builder’s hardware. Each Leaf 150.00 6. Old unserviceable plain fillets square rectangular or triangular in section of any description and any section. RM 8.00 7. Old unserviceable scantlings of any description any size. RM 50.00 8. Old unserviceable wooden boarding of any description. Sqm 25.00 9. Old unserviceable GI tubing /CPVC pipe of 15mm bore including fittings. RM 15.00 10. Old unserviceable GI tubing /CPVC pipe of 20mm bore including fittings. RM 20.00 11. Old unserviceable GI tubing /CPVC pipe of 25mm bore including fittings. RM 25.00 12. Old unserviceable aluminium handles/tower bolts/ Butt Hinge/ Piano hinge etc. Each 10.00 13. Old unserviceable aluminium al drop bolts/sliding door bolt/ door stopper. Each 20.00 14. Old unserviceable PVC flush tank 10 Litre capacity. Each 50.00 15. Old unserviceable AC sheets of any description corrugated/plain. Sqm 30.00 16. Old unserviceable wash basin / Urinal pat/ WC / EWC Each 70.00 17. Old unserviceable PVC/ soil waste/ rain water pipe/ Concrete pipe of any size RM 15.00 18. Old unserviceable precast RCC Jallies Sqm 15.00 19. Old unserviceable laboratory sink/ steel sink/ Plate rack Each 150.00 20. Old unserviceable PVC tanks of per 250 liters capacity Each 200.00 21. Old unserviceable PVC tanks of per 500 liters capacity Each 300.00 22. Old unserviceable PVC tanks of per 1000 liters capacity Each 400.00 23. Old unserviceable PVC tanks of per 2000 liters capacity Each 800.00 24. Old unserviceable wall ceiling board any type with fixing arrangement Sqm 15.00 25. Old unserviceable FRP sheet any type Sqm 25.00 26. Old unserviceable hydraulic door closer/ helical spring Each 40.00 27. Old unserviceable PVC tap/ stop cock/ float valve/ towel rail/ ring/ shower rose, seat cover/ tank cover etc. Each 15.00 28. Old unserviceable bib tap, stop cock, angular clock, concealed clock, pillar tap, Health Faucet, shower rose in brass, CP brass float valve of 15-20 mm bore etc. Each 30.00 29. Old unserviceable hydraulic floor spring Each 40.00 30. Old unserviceable CGI/GI Sheet any type including nut bolts & washers etc. Sqm 65.00 31. Old unserviceable Porbandar Stone/brick obtained from demolition of Masonry Cum 400.00 32. Old unserviceable plastic waste scrap Kg 25.00 33. Old unserviceable iron/mild steel scrap Kg 25.00 34. Old unserviceable brass scrap Kg 250.00 35. Old unserviceable copper scrap Kg 250.00 36. Old unserviceable aluminum scrap Kg 150.00 37. Old unserviceable Interlocking paver block Sqm 30.00 38. Old unserviceable MS/ Aluminium Grill Sqm 30.00 39. Old unserviceable Drapery/Curtain rod including Fittings any type Rm 10.00 40. Old unserviceable Bevelled edge mirror / Cabinet any type Each 10.00 41. Old unserviceable PVC connection Each 5.00 42. Old unserviceable grating any type Each 5.00 43. CP Mixer of wall / WHB/ Sink any type Each 250.00 44. Old unserviceable stainless steel scrap Kg 50.00 45. Old Reinforcement retrieved from demolished RCC with concrete Cum 600.00 46. Old U/S Chain link fencing any dia Sqm 15.00 47. Old U/S concertina coil any dia RM 50.00 48. Old U/S barbed wire 100 RM 200.00 49. Old U/S Corner Glass Each 10.00 50. Old U/S Soap Dish Each 10.00 51. Old U/S SS wire cloth Sqm 20.00 52. Old U/S Aluminum Composite Board Sqm 40.00 53. Old U/S stone slab/ Granite in any shape and size Sqm 10.00 54. Old U/S waste pipe any size Each 1.00 55. Old U/S waste coupling any size Each 5.00 56. Old U/S Spindle any size Each 2.00 57. Old U/S Floor trap any size Each 20.00 58. Old U/S internal Flush Fittings any type Each 5.00 HT External Electric Supply 59. Old Unsv HT UG cables of any size RM 30.00 60. Old Unsv HT joints of any size Each 50.00 61. Old Unsv air break switch triple pole, 11KV Each Set 180.00 62. Old Unsv Transformer Oil Ltrs 10.00 63. Old Unsv Silica Gel for breather Each 5.00 64. Old unsv oil temperature indicator gauge Each 25.00 65. Old unsv LT bushing with brass stud Each 500.00 66. Old unsv HT bushing with brass stud Each 500.00 67. Old Unsv charging motor Each 500.00 68. Old Unsv of closing coil 24 Volt DC Each 20.00 69. Old Unsv of tripping coil 24 Volt DC Each 20.00 70. Old Unsv master trip relay 110 volt DC RM 20.00 71. Old Unsv Auxiliary Relay 110 volt DC Each 20.00 72. Old Unsv Protection Relay 110 volt DC Each 20.00 73. Old Unsv HT 11 KV drop out fuse assembly with insulator and base Each 250.00 74. Old Unsv synthetic Rubber insulated mats 2.5 mm thick Each 250.00 EXTERNAL ELECTRIC SUPPLY (LT DISTRIBUTIONSYSTEM) 75. Old U/s capacitor Each 10.00 76. Old U/s APFC relay Each 10.00 77. Old U/s Digital time switches (SST 15 min) for street light 215 V Each 10.00 78. Old Unsv Cable jointing kit for 1.1 KV grade cable 25 sq mm to 185 sq mm Each 10.00 79. Old Unsv XLPE cable of size RM 20.00 80. Old Unsv DWC pipe of any size RM 5.00 81. Old Unsv MCCB FP, 415 V of size 63/100/200/320A Each 150.00 82. Old unsv MCB of any size any type Each 5.00 83. Old Unsv street light fitting LED type 70 watts Each 20.00 84 Old Unsv Multi standard Copper Conductor cable of size 1.5 Sq mm 3 Core Each 5.00 85. Old Unsv 4 pole power contactor MCX-13, 50 Hz Each 5.00 86. Old Unsv power Relay MNX - A1,/MNX - A2, 50 Hz Each 5.00 87. Old Unsv Bldg Security light fitting LED type 25 watts Each 5.00 88. Old Unsv LED Bollard 11W, IP 65, Die cast aluminium housing Each 10.00 89. Old Unsv LED Bollard 10W, IP 65, Die cast aluminium housing Each 10.00 90. Old Unsv automatic street light switch (5 KW to 8 KW) Amps Each 10.00 91. Old Unsv On-Load Change over Switch with encloser 200 Amps Each 150.00 92. Old Unsv Pole box with 6 Amps MCB Each 5.00 93. Old Unsv alumium lugs long barrel of any size Each 2.00 EXTERNAL WATER SUPPLY 94. Old Unsv CI/DI pipes of 80 to 150 mm dia RM 15.00 95. Old Unsv PP-R Polypropylene pipes of 25/50mm dia RM 20.00 96. Old Unsv 25/50 m dia, PP-R Ball valves Each 15.00 97. Old Unsv ductile iron socketed fittings supplied material Kgs 20.00 98. Old Unsv ductile iron socketed fittings supplied material Kg 60.00 99. Old Unsv rubber gasket (Tyton) joints Each 2.00 100. Old U/s Copper wire obtained from monoblock pump set centrifugal type of cap 20 HP Kg 210.00 SEWAGE TREATMENT PLANT 101. Old Unsv winding material Kgs 280.00 102. Old Unsv V Belt Each 5.00 103. Old Unsv Gear oil Each 5.00 104. Old Unsv air-filte Each 5.00 105. Old U/s cartridge /jumbo fliter 20 Each 12.00 106. Old U/s RO palnt membrane any size Each 50.00 107. Old U/s solenoid Valve for RO Palnt any size Each 80.00 108. Old U/s Sand filter media for RO Palnt any size Kg 82.00 109. Old U/s Carbon media for RO Palnt any size Kg 83.00 110. Old Unsv PVC Suction hose of any size RM 5.00 111. Old Unsv Foot valves, Butterfly Valves, NRV and disk filter of any size Each 5.00 112. Old Unsv Flexible Flat of size 2.5 Sqmm 3 core copper couductor RM 10.00 113. Old Unsv Round strand Galvanized Iron Steel Wire Rope dia 8 mm RM 5.00 114. Old U/s Fuel filter/oil filter/Air filter Each 5.00 115. Old U/s Coolant Ltr 2.00 116. Old U/s Engine oil Ltr 3.00

BRR:8650993 Tender For Execution Of Certain Sanction Work Of Age B/R-Ii And Age E/M Under Ge (Af) Subroto Park; 1 Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50 m and making good in hard/dense soil complete all as specified. 2 M & L PCC (1:4:8) type D-2 ( using 40mm crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed 3 M & L PCC (1:3:6) type C-2 ( using 40mm crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed 4 S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 1979 grade St-240 complete all as specified. 5 S & F Mild Steel plates (plain or chequred ) channels, square cut to notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. 6 S & F moulded pre-painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed 7 S & F moulded pre-painted galvanume aluminium zinc coating GI based plainsteel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in eaves sheeting /cladding to wall, fixed with self tapping screws as specified and directed 8 M & L for preparationof new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed 9 S&F aluminium frame powder coated any colour(minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. including taking down each chowkhats or frames with shutters (without taking off shutters from the frames) complete all as specified and directed 10 S&F aluminium powder coatedan (minimum thickness of powder coating 50 micron) as in window and ventilator both side openable shutters, partician aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruberpacking, anodised aluminum snap beading screws etc. complete all as specified and as directed. 11 Supply and fix sheet glass 5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubberbeading including black/white glass film if required complete all as specified and directed. 12 S&F forStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete and specified and as directed 13 M&L for preparation of old surfaceand applying two coat of oil bound distemper white or tinted on wall/ ceiling completeall as specified and directed. 14 Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/hard/dence soil complete all as specified and directed by Engineer-in-Charge. 15 Removing excavated material(soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. 16 M&L for 75 mm thick cement concrate type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. 17 M&L forSand filling under floors in foundation including watering and consolidationcomplete all as specified and directed 18 M& L for Machine pressed pressed concreteinterlocking paver block of approved colour with rubber mould type any shape and size confirming to IS 15658-200680 mm thickness M-40 Grade of concrete as in floor /pavement and design with grey cement and pigment as approved confirming to IS 15658-2006 complete all as specified and as directed 19 M&L for brick work with subclass B bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 all complete all as specified and directed 20 M & L rendering 5 mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified and directed. 21 M&L for rendering CM (1:6) 10 mm thick on other than fair/rough faces of brick work or concrete surfaces etc includingfinished even and smooth without using extra cement complete all as specified and directed 22 M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete new surfaces etc includingfinished even and smooth without using extra cement complete all as specified and directed 23 M&L cement concrete type B1 1:2:4(using 12.5 mm graded stone aggregate) as in copings complete all as specified and directed 24 M&L for Formwork to sofits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick. complete all as specified and directed. 25 M&L for providing pre-cast cement concrete as in landing beam, cover slabschullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 complete all as specified and directed. 26 M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed 27 All as per item No 26 here in beforebut 8 mm dia in stirrups,spacer and binder complete all as specified and directed 28 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge. 29 M&LVirified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) andjointed with neat cement slurry over 15 mm thickcement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and as directed. 30 M&L Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchinclback plaster 10 mm thick in cm 1:4 complete all as specified and directed 31 M&LGranite (of any type) tiles 20mm (+-2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulded ofnedges grinding and polishing complete all as specified and directed. 32 Material & labour for preparation of new/old decorated plastered surfaces and applying two coat of exterior grade modified antifungal water based weather proof acrylic emulsion dirt cleaning property paints on wall, fins, facias, chajjas incl 1to 2 mm thick wall care putty etc complete all as specified and as directed by the Engr-in-Charge. 33 M&L for site clearance in Soft/ Loose Soil (for clearing bushes, vegitation, weeds etc) complete all as specified and directed 34 M&L for posts and struts in fencing incl cutting tops to shape as directed, drilling holes,notching for wire, etc.flat iron fillets incl all necessary drilling, bolting or riveting, etc. ,drilled and countersunk for balusters running bars and screwing etc. wind ties for roof including securing bolts;, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 35 M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, notexc 5cmlong and 5 to 10 mm dia. complete all as specified and directed. 36 M&L for preparing newly steel or iron surface of any description over 10 cm width or girth and applying onecoat of red oxide primer on embedded portion of posts and struts complete all as specified and directed. 37 Supply only GI Chain linkfencing, any dia, any size or type complete all as specified and directed. 38 Fixing only GI chain link fencing of any dia, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed. 39 M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and portionsframedandhungas gates,includingpintlehinges, stops,hand-made sliding bolts, etc complete all as specified and directed 40 S&F Mild steel, plain, 1mm th blacksheet in wall cladding, steel gates and similarwork, cut to size, holespunched; includinground headed screws, clout nails or rivetsand fixed to wood orsteel framing withplain40 mm lap jointswith riveted or weldedseams, including bendingor turning up, mitredangles, etc. as required 41 S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved and 80mm thick plain cement concrete, type D-2, 1:4:8,(using 40mm graded stone aggregate) as in sub base flooring, surface finished even complete all as specified and directed . 42 M&L Hardcore of guage exc 63mm but n.exc 100 mm, broken bricks deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed 43 M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping etc complete all as specified and directed 44 Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately. 45 Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge. 46 Supply and fixing brass butterfly valve class PN-1.0 of size 25mm dia complete all as specified and as directed 47 S&F gun metal non return valve of size 25mm bore complete all as specified and as directed 48 Supply and fixingGI tubing medium grade 25mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed 49 All as per item No 48.00 but for 15 mm bore dia complete all as specified and as directed by Engineer-in-charge. 50 Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge 51 Supply and fixing brass fountain nozzleof size 12mm /15mm complete all as specified and directed by Engineer-in -Charge. 52 Supply and fixing Submersible Tulu pump of PVC body Single phase 230V suitable for 2.5 mtr headcomplete all as specified and directed. 53 S&Funder water fountain LED light fitting 24 volt 3 watt multicolour type including suitable driver complete all as specified and directed. 54 S&F flat PVC insulated submersible copper cable of size 1.5 sqmm 3 core,1100 volt grade complete all as specified and as directed . 55 M & L for submain wiring with three run of 4.0 sqmm singlecore PVC insulated FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 markedand under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittingsall laid/fixed concealed in wall and on surface in ceilingcomplete all as specified and directed. Note: - Three runs of cable and one run PVC conduit will me measured as one unit for payment purpose. 56 Supply and fixing MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCAmild steel sheet surface mounting SPN 8 way 230 volts double door typecomplete all as specified and as directed.Note :- MCB shall be measured and paid seperately. 57 S&F MCB SP 6 to 32 Amps 10 KA, 240 volt C Series all as specified and directed by engineer-in-charge. 58 S&F MCB SPN40 Amps 10 KA, 240 volt50 HZ C Series all as specified and directed by engineer-in-charge. 59 M&L forearthing complete with GI earth plate electrode 60cmx60cmx6.0 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron wire 4 mm dia as earth lead by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate& copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plateNO 3 of SSR Part I (2009)and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all asspecifiedNote :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. 60 M&L of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed. 61 Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 62 M&L 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified and directed. 63 M & L for machine made Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over andincluding 25mm average thickness sand cushioning complete all as specifiedand directed. 64 Supply, installation, testing, and commissioning offloat type Point Level Sensor for Under ground sumpk with the following specification:- Type:- Magnetic Magnet:- Ring Type Switch:- Reed Switch Connecting cable:- 2 core Teflon 65 Supply, installation, testing, and commissioning ofPressure Transmitterwith proper wiring including necessary power pack for supply of DC :-Power supply: 10-36 V DCEnclosure: whether proof IP 65Process temperature: -30 to 120 CelsiusAccuracy: 0.25 % 66 Supply, Installation Testing & Commissioning of Outdoor type having Canopy and Double Door for weather protection, PLC ( Programmable Logic Controller) based Pump and Valve Automation, Protection Panel suitable for control and monitoring of 02 Nos. Submersible Pump 15HP, 02 Nos. Pressure Transmitter, 04 Nos. Float Sensors. The panel should be of minimum size 600(H) X 400(W) X 250(D) mm fabricated from 3.15 mm CRCA Sheet. (Location :- Rain Water Tank) The Panel should comprise the following items:- (a) Water Level Sensing & Display(b) Automatic Pump On/Off (c) Single Phasing Prevention (e) Manual Mode Operation (all connected sub systems including all pumps) from the PLC based Control Panel.(iii) 01 No. SMPS of 1.5A rating suitable according to panel design. (iv) Suitable No. of interposing relays of220VAC & 24 VDC coil rating and 6 A contact rating.(v) Suitable No. of relay cards with operating voltage 24VDC, with continuous current of 5A. Card must be of 4 channel & having 8 relays. (vi) MCB rating 16A, 10A, 6A as suitable according to panel design. (vii) Illuminiated push button, Indicator lamp, Selector switches as suitable according to panel design. (viii) Audio visual alarm indicator as suitable according to panel design. 67 Supply, Installation, testing and commissioning of FRP cooling tower f minimum 60 TR heat rejection capacity with FRP water basin PVC fillings with integral louvers and drift eliminators complete with hot water basin either fitted with spray nozzles or having self rotationg sprinklers, statically & dynamically balanced axial flow type fan direct driven, suction screen, make up quick filling arrangement, over flow and drain connections with necessary valves and suitable insoection ladder, access arrangement for cooling lower interior, installed om MS girders (MS-I section) fixed in mansory fiundation with cement concrete footing, second class brick work and cement mortor 1:6 allaccesories, basin fitting, fan, fan motor suitable for 415 Volt supporting structure, anti vibration mountings etc. complete and 50 HZ power supply having isolator panel with MCB at cooling tower and with following technical data and complete all as specified and directed. 68 Supply fixing testing and commissioning of water pipes of MS Class C of 100mm diaand material along with necessary clamps, vibration isolators and dittings sucha as bends tee etc but excluding strainer and gauges etc adequately supported on rigid supports/ buried in ground including excavation, returning filling etc complete all as specified and as directed 69 All as per item No 68.00 but for 80mm dia complete all as specified and as directed by Engineer-in-charge. 70 Supply fixing testing and commissioning of following types of butterfly valve 100mm dia in chilled and condesor water pipeline complete all as specified and as directed 71 Supply and fixing Pressure booster pump of capacity 0.5 HP ,single phase, 50 Hz mounted on roof for boosting water supply to high pressure and connected with water supply pipe line including necessary fittings complete alll as specified and directed by Engr -in-Charge. 72 Supply and fixinggun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 25mm dia complete all as specified and as directed by Engineer-in-charge. 73 M & L for point wiring with 2.5 Sqmm single coremulti stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps switch with accessories such as junction boxes, bends, tees etc. of suitable sizeincluding sunk cast iron or pressed steel terminal box for mounting switches, sockets with 3 mm thick plastic laminated sheet top cover including continuous earth wire PVC insulated 2.5 Sqmm single coremulti stranded copper conductor connectedto common earth dolly. 74 S&F socket outlet 2 in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. 75 S&F switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

BRR:8650977 Tender For Special Repair To Roads And Pathways Of 6 Adv Fd Vet Hosp And Special Repair To At Mt Area (Approx 450 Mtrs) Of 101 Fd Regt Under Ge West Bareilly.; 1 M&L for repair to potholes any depth, n exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to atleast 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming(including supplyof road metal) complete all as specified and directed. 2 Scarifying or picking gravelled, macadamor bituminous macadam surfaces in arean exc 400 sqm n exc 50 mm deep complete all as specified and directed. 3 M&L for applying evenly a priming/ tack coatof using paving bituminous VG-10 grade10 Kg per 10 Sqm by mechanical sprayer complete all as specified and directed. 4 M & L for premix bituminous, macadam with 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. 5 M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applyingevenly a tack coat with bituminous primer at 5 kg per 10 sqm VG-10 (Paving Bitumen) complete all as specified and directed. 6 M&L for bituminous premix asphaltic semidense concrete 30mm consolidated thickness with not less than 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradientvcomplete with 8 to 10 Tonne power roller to required compaction complete all as specified and directed. 7 Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.complete all as specified and directed. 8 Supply and fixsolar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. 9 M & L for painting lines, dashes , arrows, letters, etc on roads, pavements and the like exc 10cmwide with thermolplastic paint 2mm thick , white or golden yellow or as directed by GE complete all as specified and directed. 10 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed. 11 M & L hardcore of broken stone or boulders of gauge n.exc.63mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. 12 M & L plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete completeall as specified and directed. 13 M&L forMachine pressedPrecast cement concrete, factory made coloured glazed interlocking paver block any shape and size conforming to IS 15658 -2006 of80mm thickness, M-40 Grade,machine pressed of pattern and colour with grey cement & pigment including 25 mm thick sand cushioncomplete all as specified and directed. 14 S&Fdelineator 1200mm long made of 2 mm thick steel sheet rectangular OD size 75 x 100mm. Bottom plate 2mm thick of size 150 x 150 mm for firm grip welded to base. Top end closed with 2mm steel sheet. At top on both sides diamond grade cube corner micro white reflector of size 75 x 125mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white/yellow/red reflective sheet of width 225mm by keeping black coat as bands for greater night visibility.All coated with heat process and baked to 120°C or powder coated to make all weather resistant and fixing in cement concrete 1:2:4 with size of block 450mm x 450mm x600mm deep including required excavation and earthwork complete all as specified and directed. Note: The rate of PCC and earth work is included in this item and nothing shall be paid extra 15 S&Ffor Convex mirror of dia 1000 mm made of PC material provided with suitable SS Pipe post (min 2100 length , 75 mm dia) and fixing arrangement as per site requirement it should have clear and deficate mirror image valving 130 degree of viewing angle and unbbreakable and stronger than glass complete all as specified and directed.

BRR:8650969 Tender For Special Repair To Roads At 10 Guards And I Adou Under Ge (South) Patiala.; 1 Material and labour for preparing existing black top surfaceby brushing with wire brushed for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc from black top surface, Applying evenly a premix /tack coat with bitumen grade VG-10 @ 5.0 Kg per ten Sqm complete all as specified and as directed by Engineer-in-charge. 2 Material and labour for laying Premix Bituminous macadam of consolidated thickness 25mm to 50mm, using paving bitumen binder of grade VG-30 @ and binder content of 4% by weight of total mix with mixing of aggregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hydrostatic paver finisher (Paver shall not be compulsory in case of patch work using B.M.) and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 504 MoRTH (5th Rev) specification complete all as specified and as directed by Engineer-in-charge. Notes : (i). The contractor shall quote the rate against Item considering 4% VG-30 bitumen content. Job Mix Formula as per CI. No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out from Thapar Institute. of Engg & Tech Patiala/NIT Kurukhshetra /PEC Chandigarh/CTL for obtaining optimum binder content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ 50/kg of binder and no adjustment shall be made on plus side.(ii). The BM shall be covered with top layer/wearing course within in a maximum of 48 hours. If ther is to be any delay, by the contractor the course shall be covered by seal coat to the requirement of Clause 512 of MORTH (5th Rev) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately. 3 Material and labour for applying evenly a premix /tack coat with bitumen grade VG-10 @ 4.0 Kg per ten Sqm complete all as specified and as directed by Engineer-in-charge. 4 Material and labour for laying Premix Bituminous concrete 30mmconsolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2withmixing of agrgregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hyrdostatic paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification complete all as specified and as directed by Engineer-in-charge. 5 Notes : (i). The contractor shall quotes the rate againstItemconsidering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from Thapar Insti. of Engg & Tech. Patiala/ NIT Kurukshetra/ PEC Chandigarh/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ Rs 50/kg of binder and no adjustment shall be made on plus side.(ii). Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate.(iii).After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate. 6 (iv) The vintage of the T&P (Hot mix plant/road roller i.e. vibratory roller, static roller, hydraulic roller/paver) should not be more than 10 years except the tippers and shall be approved by GE before date of commencement of the work.(v) The certificate wrt the capacity of the hot mix plant (HMP) shall be 100-120 TPH and the plant shall be electronic operated, batch type and location be intimated and the same shall be approved by GE before date of commencement of the work.(vi) The distance of the HMP shall not be more than 100 KM from the Mil Stn Patiala, Detail of plant to be submitted to GE for approval before date of commencement of the work.(vii) The calibration certificate for HMP shall be submitted by the contractor for approval of GE before date of commencement of the work which should not be more than 6 months old.(viii) The minimum 2 Road roller each (vibrating and static road roller) are required at site before commencement of the work on the ground and the same shall be approved by GE before date of commencement of the work 7 Repairs to pot holes any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scouring sunken surfacesin roads, path etc cutting edges at least 25 mm depth and making good by applying tack coat with bitumen @ 5 kg/X Sqm, putting in premix bituminous macadam using paving bitumen of grade VG-30 well rammed and sealed with binder @ 9.80 kg mixed with 0.09 cum of stone chippings 6.3 mm size per 10 Sqm and again well rammed including supply of premixed macadam, binder and chipings, depth of pot holes exe 30mm thick complete all as specified and as directed by Engineer-in-charge. 8 Material and labour for 2.5mm thick road markingthermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfacescomplete all as specified and directed by Engineer-in-Charge.Make : Reliance /Asian /Shalimar 9 Materaial and labour for 5mm thick rumble stirps as road marking with thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm for each coat of 2.5mm thick ) and glass beads @ 250 gm/Sqm for each coat of 2.5mm thick confirming to CI No. 803.4 of MoRTH in strips of any width on road surfaces complete all as specified and as directed by Engineer-in-Charge.Make : Reliance /Asian /Shalimar 10 Supply and fixing road cat eye of dimenions 89-90X101-102x17mm meeting with ASTM and MoR&TH standards with yellow reflector yellow body colour or any other colour as approved and two side Retroreflective Microprismatic tough Polycarbonate lenscomplete all as specified and as directed by Engineer-in-charge. Note:The studs shall be fixed to the road surface using the epoxy/adhesive conforming to IS, as per manufacturers recommendation complete and as specified and as directed by Engineer-in-charge. 11 Taking down existing brick edging/kerb stones of any size/description/grade of concrete embedding in the ground upto any depths including necessary earth work if required etc complete all as specified and as directed by Engineer-in-charge. 12 Material and labour for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 mtrs complete all as specified and as directed by Engineer-in-charge. 13 Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50 but n. exc. 100 mm deep complete all as specified and as directed by Engineer-in-charge. 14 Material and labour for laying and compacting for 75 mm thick (compacted thickness ) WMM laid in single layer Wet Mix Macadam (WMM) grading as per table 400-13 of MORTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OO KN static weight and consolidating to required gradien and camber, the finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and as directed by Engineer-in-charge. 15 Material and labour for preparation of un-surfaced of Wet Mix Macadam (WMM) syrfaces by sweeping, cleaning by power broomers or mechanical sweepers or by brushing with wire brushed for removing caked mud etc removing completely all loose materials and other foreign materials and finally fanning the cleaned surface with air compressors to remove all loose dirt etc and applying a priming/tack coat of paving bitumen of grade VG-10 @ 10 Kg per 10 Sqm for premix bituminous carpet using mechanical sprayer complete all as specified and as directed by Engineer-in-charge. 16 Excavation in trenchesnot exceeding 1.50 metre wide and not exc. 1.5 metre in depth for foundation , laying of pipe etc and getting outas in soft/loose soilcomplete all as specified and as directed by Engineer-in-charge. 17 Returning and filling including spreading leveling , watering and well ramming in layer not exceeding 25cm thick complete all as specified and as directed by Engineer-in-charge. 18 Removing excavated spoil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 meterabove the starting point complete complete all as specified and as directed by Engineer-in-charge. 19 Material and labour for concrete bed to450 mm bore/dia drain pipes with cement concrete 1:3:6 type C-2 using 40mm raded stone aggregates including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed by Engineer-in-charge. 20 Material and labour for 450mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-charge. 21 Material and labourfor Brick work with old sizefly ash bricks class designation 100,straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. 22 Material and labour for cementconcrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in benching, coping,stops etc rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge. 23 Material and labour for rendering 15mm thick on brick work or concrete surfaces or in chajjas/parapet walls etc in cemet mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. 24 Material and labour for preparation of plastered or unplastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coat of cement base paint over and including a coat of primer complete all as specified and as directed by Engineer-in-Charge. 25 Material and labour for dismantling of existing paver block and re-fixing the same in another or same location including 50mm thick sand cushioningcomplete all as specified and as directed by Engineer-in-Charge. 26 Material and labour for demolition ofcement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and as directed by Engineer-in-Charge. 27 Material and labour for hardcore of broken stone boulders of gauge n exc. 63 mm,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. 28 Material and labour for cement concrete 1:4:8type D-2 using 40 mm graded stone aggregates as in foundations, sub-base, flooring,paving etc complete all as specified and as directed by Engineer-in-Charge. 29 Material and labour for laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-Charge. 30 Supply and fixing solar road stud/cateye shall be produced from an engineered polymer selected for superior impact resistance and weatherability. The top of the marker should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approed by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree smooth illumination. The marker shall also have high reflective lenses for conspicuity in passive mode and dual shanks for improved road presence. These markers are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 4 mm. The body of the solar cateye shall be resistant to dust and water ingress as per IP 65 & IP 68 standards as per testing parameter requirement of MORTH Section 800. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. complete all as specified and as directed by Engineer-in-Charge. 31 Supply and fixing 60 cm size Convex Mirror made up of Polycarbonate reflective mirror with unbreakable polycarbonate lens with flat back and body is made of ABS/Fiber/Plastic suitable for outdoor use with hood complete with adjustable fixing bracket, installation kit with nut & bolts/mounting hardware including post of SS 304 Grade Pipe of minimum 65mm bore of suitable height complete all as specified and as directed by Engineer-in-Charge.Make : Pioneer or equivalent as approved.

BRR:8650966 Tender For Special Repair To Bldg No. T-130, T-141 And T-143 At Chumathang And Provn Of Hardstanding With Paver Blocks Along With High Mast Light At Kiari Area Under Ge 860 Ews.

BRR:8649695 Tender For Construction Of Security Building For Barc (F), Rr Site Via Kota, Rajasthan.; 1 Part-I : Civil WorksSection- A: EarthworkEarth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete andas directed by the Engineer-in-charge. 2 From 0.00 to 1.50 m depth from Average Ground Level 3 Earth work excavation by mechanical means (Hydraulic excavator) / manual means in foundation, in Soft Rockincluding shoring, dewatering if necessary, dressing the sides, ramming the bottom, refilling the sidesetc. with available selected excavated earth in layers of not exceeding 500 mm in depth, each layer well rammed and consolidated disposal of surplus excavated material within a lead of 200 m complete as per specifications and as directed by the Engineer-in-charge. 4 From 0.00 to 1.50 m depth from Average Ground Level 5 Earth work excavation in foundationin Hard Rockby Chiselling and / or by mechanical means (Hydraulic excavator)/ Manual means including dewatering if necessary, dressing the sides, ramming the bottom,and stacking and / or disposing within a distance of 200 m and filling the sides of foundation with available selected excavated earth in layers not exceeding 500 mm in depth, each layer well rammed and consolidated etc.complete all as per specifications and as directed by the Engineer-in-Charge. 6 From 0.00 to 1.50 m depth from Average Ground Level 7 From 1.50 to 3.00 m depthfrom Average Ground Level 8 Earth work excavation in foundation in Hard Rock by controlled Blasting (including explosive,drilling, muffling, pre shear line drilling )and by mechanical means (Hydraulic excavator) / Manual means including dewatering if necessary, dressing the sides of foundation, ramming the bottom of foundation, stacking and / or disposing within a distance of 200 m and filling the sides of foundation with available excavated earth in layers not exceeding 250 mm in depth, each layer well rammed and consolidated etc. complete all as per specifications and as directed by the Engineer-in-Charge. Blasting works to be executedas per safety norms and as per specifications and as directed by the Engineer-in-charge. 9 From 0.00 to 1.50 m depth from Average Ground Level 10 From 1.50 to 3.00 m depthfrom Average Ground Level 11 From 3.00 to 4.50 m depthfrom Average Ground Level 12 From 4.50 to 6.00 m depthfrom Average Ground Level 13 Supplying and stacking good excavated earth available at site , including compaction of earthwork in embankment under optimum moisture conditions to give at least 95% of the maximum dry density ( Proctor density). 14 Cutting and felling trees of girth beyond 30 cm up to and including 60 cm girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable materials complete as per specifications and as directed by the Engineer-in-charge. 15 Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. 16 Soil 17 Rock 18 Debris 19 Lead charges for Lead exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. 20 Soil 21 Rock 22 Debris Note: The rates in respect of Item Nos. 7and 8 are applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil ,@ 50% in respect of Rock and @30% in respect of debrisfrom corresponding STACK / TRUCK Measurement 23 Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for preconstructional antitermite treatment and creating a chemical barrier under and alround the masonry pits, masonry foundations, wall trenches, plinth filling, junctions of wall and floor, expansion joints, surfaces of RCC works for a depth of min. 500 mm from the finished ground level, surrounding of pipes, conduits etc., walls retaining soil above floor level, apron and drain along the perimeter of the building including all byeworks complete as per specification / IS 6313:2001 or latest revision and direction of Engineer-In-charge (only ground floor plinth area of the building will be measured for the payment in the following three stages. i) 20% after completion of the foundations ii) 50% after completion of the ground floor flooring iii) 30% after completion ofall treatment works including ground floor doors & windows. Work to be executed by approved agency and specified guarantee for 10 (ten) years shall be furnished by the contractor. 24 SECTION -B: Plain Cement Concrete & Reinforced Cement ConcreteProviding and laying in position cement concrete of 1:4:8 (1 cement, 4 crushed sand, 8 graded stone aggregate of maximum size 20 / 40 mm) with minimum cement content as per the latest revision of the relevant IS code including consolidation, finishing, curing etc. complete as per specifications and drawingsbut excluding the cost of Form work shuttering, centering complete at all levels. 25 Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) with minimum cement content as per the latest revision of the relevant IS code including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels. 26 Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) with minimum cement content as per the latest revision of the relevant IS code including consolidation, finishing, curing etc. complete as per specification and drawingsbut excluding the cost of Formworkshuttering, centering complete at all levels. 27 Providing and fixing at all levels, precast members using cement concrete 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of max. size 20 mm) in copings and / or bed blocks, plain window sills, shelves, louvers, steps, staircases, trench covers, drain covers etc. including hoisting and setting in position with C.M 1:3 (using crushed sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (using Crushed sand) on exposed surfaces complete as per specifications at all levels. 28 Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge. 29 Providing and laying in position Reinforced CementConcrete (RCC) of grade M-20 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.Note : The minimum cement content for RCC works should be as per the latest revision of the relevant IS code. 30 Providing and laying in position Reinforced CementConcrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.Note : The minimum cement content for RCC works should be as per the latest revision of the relevant IS code. 31 Providing and laying in position Reinforced CementConcrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications in superstructure up to 20.00m height.Note : The minimum cement content for RCC works should be as per the latest revision of the relevant IS code. 32 EXTRA (over Item nos. 10,11,12,15,16 and 17) forReady Mixed Concrete ofall Grades of RCC / PCC manufactured in Fully Automatic Batching plantproduced inside Project areasas per direction of Engineer-in-chargecomplete as per specifications . 33 Providing and laying in position PLUM Concretewith 70 % cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) and 30 % 150 to 230 mm size soling stones spreading uniformlyas per directions of the Engineer-in-Chargeincluding consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering complete at all levels 34 SECTION -C: Reinforcement Steel, Structural Steel & Formwork Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coatedG.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.Steel supplied by the contractor. Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor shall conform to IS – 1786(Latest edition) and BARC specification . Note: 1) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories without any extra cost. 2) Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment. 3) Cover blocks shall be of same grade of concrete. 35 Providing Structural steel work in M.S Plain Plates and Chequrred Platesfor Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approvedzinc chromate steel primer etc.including cost ofstructural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Usingmaterialsof approvedmanufacturers. All test reports to be provided along with the supply of the materials conforming to IS:2062. 36 Providing Structural steel work using angles, channels, joists and other sections, weldedand / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structuresincludingsupplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawingsand as directed by theEngineer in charge. 37 Up to and including 300 mm Joists, 350 mm channels, and below sections using materials ofapproved manufacturers.(ISI marked) All test reports to be provided along with the supply of the materialsconforming to IS:2062Notes for Item No. 21 & 22.01:1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 2. Welding weights, connections, bolts and nuts shall notbe measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes from approved manufactrers meetinf all the technical specifications (the electrode gives smooth radiographic quality weld with low spatter and smoke) grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. 38 Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like pergolas, trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including applying a coat of Zinc chromate primer of approved make all as per specifications as per relevent codes and standards; all as per specifications, drwaings and as dircted by Engineer in Charge.Notes: 1. Yst 310 Conforming to IS 4923:1997 (Reaffirmed in 2009) with yield stregth of 310 N/sq. mm (For all rectangular Box sections Grade of steel to be used.) 2. Structural steel confirming to IS 2062 shall be supplied from approved manufacturers from their own plants rolled from virgin materials to be procured directly or from their authorised dealers and test certificate to be produced. 3. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 4. Welding weights, connections, bolts and nuts shall notbe measured for payment but the cost of which shall be deemed to have been included in the rates. 5. Welding Electrodes from approved manufactrers meetinf all the technical specifications (the electrode gives smooth radiographic quality weld with low spatter and smoke) grade only shall be used. 6.Holes to be drilled only by Drilling machines. Gas cutting of holes are not permitted . 7. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. 39 Providing and fixing hand rail of approved sizeby welding etc. to steel ladder railing, balcony railing & staircases railing including applying a priming coat of zinc chromate steel primer etc. complete as per specifications using M.S tubes of ISI marked (Medium) of specified diameter and thickness. 40 Providing and fixing hand rail using304 grade Stainless Steel pipesof approved size and qualityby welding, mirror / matt polishing, fixing at siteetc. forbalcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge. 41 Providing and fixing 304 grade Stainless Steel pipesof approved size, make and quality by cutting and placing in position including embedding if necessary complete as per specification and as directed by the Engineer in charge. 42 Providing and fixing in position 50 mm thick Thermocoleboard heavy density minimum 18.00 Kg/ CuM weight wrapped in 200 micron thickness Polythene sheets and placingin machine foundation workscomplete as per specifications and drawings andas directed by the Engineer incharge. 43 Providing and fixing at all levels MS bolts including nuts and washers of approved size, quality and makeas per requirements, drawingscomplete all as directed at site by the Engineer in charge 44 Providing and fixing at all levels SS bolts including nuts and washers of approved size, quality and make as per requirements and as per specifications, drawingscomplete all as directed at site by the Engineer in charge 45 Providing and fixingfabricated embedded parts/ platesmade 304 grade Stainless Steel pipes/ Plates/ Flanges etc.as perdrawings of approvedmake and qualityby welding,fixing, embedding in concreteat siteetc.as per drawings, specifications complete. Note :A sample to be fabricated and to be got approved by theProject Engineerbefore starting of work at site. This work to be executed through approved specialized agency. 46 Labour charges for Fixing in position in RCC / Masonry/ Form workMild steel or Stainless steel fabricatedEmbedded Parts supplied by the Department including transporting from the departmental stores, aligning, fixing in position, welding, providing necessary supporting arrangements etc. complete all as per drawings and specifications and as directed by the Project Engineer. 47 Weighing Up to 100 kg 48 Weighing Up to 100 kg and inclusive of 1000 Kg 49 Weighingabove 1000 KgNote : M.S. Steel / Reinforcement steel/ jigs & fixtures if required for supporting shall be paid under relevant item. 50 Providing , centering ,shuttering Form work using PVC film facedplywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels 51 For Sub Structure 52 For Super Structure 53 For Circular & curved shuttering In Sub Structure 54 For Circular & curved shuttering In Super structure 55 Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. 56 SECTION -D: Masonry works & PlasteringProviding and constructing Half brick masonry using Flyash/ FlyashLime bricks in substructure with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Reinforcement will be paid under relevant item) 57 Providing and constructing Half brick masonry using Flyash/ FlyashLime brickswith minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure at all levels. (Reinforcement will be paid under relevant item) 58 Providing and constructing Brickwork in cement mortar 1:6using crushed sand withFlyash / FlyashLime brickswith minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. 59 Providing and constructing Brickwork in cement mortar1:6 using crushed sand withFlyash/ FlyashLime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure at all levelsincluding, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. 60 Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6(using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. completeas per drawings and specifications. 61 Providing and constructing Random Rubble masonry using approved Rubble stone in super structure (above plinth) at all levels in C.M 1:6(using crushed sand) including raking out joints or simultaneous flush pointing above ground level / plinth leveland upto20m height including scaffolding, curing etc. complete as per drawings and specifications. 62 Labour charges for constructing Random Rubble masonry using Rubble Stone available at site in foundation and plinth in C.M 1:6(using crushed sand) including cost of bond stones, raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. completeas per drawings and specifications. 63 Labour charges for constructing Random Rubble masonry using Rubble Stones available at site in super structureupto 20m height at all levels in C.M 1:6(using crushed sand) including cost of bond stones, raking out joints or simultaneous flush pointing , curing etc. completeas per drawings and specifications. 64 Forming of grooves of uniform size from 12 mm X 12 mm to 25 mm X 15 mm in plastered surfaces as per approved pattern using wooden batterns, nailed to the under layer including removal of wooden batterns, repair to the edges of plaster panels and finishing the groove complete as per specifications and as per the direction of Engineer-in-charge 65 Providing 15mm thick plastering using Ready mix internal plastering compound of approved make for internalfaces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding completeall as per specifications and as directed at site by the Engineer-in-charge 66 Providing20 mm thick plastering using Ready mixexternal plastering compound ofapproved make for externalfaces of brickwork / concrete surfaces including preparation of the surface, curing, cleaningscaffoldingat all heights complete, all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge 67 Providing and fixingG.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plasteringcomplete all as directed by the Engineer-in-charge. (Only area of the chicken mesh used alone will be measured) 68 SECTION -E: Flooringworks Providing and layingminimum 25 mm thickuniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtainmirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete. 69 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm ) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 70 Providing and LayingMinimum 25 mm thickuniform shade Kotah stonetreads and risers of steps, skirting,window sills in single length up to 2.00 metres length slabdado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finishcomplete as per specifications, drawings and as directed by the Engineer-in-charge 71 Extra (over Item No. 48) for nosing in steps of treads Using Kotah stone 72 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make, shade andcolour of size ranging from300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mmas approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. 73 Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and300 - 600 mm wide andthickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved byEngineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge 74 Providing and fixing Glazed VITRIFIED floor tiles of approved make of size above 600x 600mm and up to and including900 x 900mm conforming to IS 15622 inall colours and shades in Glossy or Matt or satin finishlaid over a bed of minimum20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints withwhite cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge 75 Providing and Fixing3.00 mm thick Homogeneous PVC sheet / tile in flooring and skirting of approved make or approved equivalent meeting all the technical specifications as per relevant codes and standards in approvedpattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer meeting all the technical specifications as per relevant codes and standards including leveling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade. 76 Supplying, stacking and laying of 230mm thickrubble soling stones as under floor baseincluding packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, murum etc. complete all as per specifications and as directed by the Engineer-in-charge. 77 Murum fillingunder floors of specifiedthickness in layers ofnot more than 150 mm thickness including supplying required materials andconsolidation etc. complete (Murum to be brought from outside campus ofRR Site). 78 Providing, supplying and laying pre polished granite slab flooring / dado / Wall claddingof approved blackshade, colour and texture withnot less than15-17mm thick graniteslabsover20 mmthick base cement mortar 1:4 (using crushed sand) laid and placedwith grey cement slurry includingfilling the joints with matching whitecement basedtile groutcomplete all as per specifications and drawings. 79 Providing, supplying and laying pre polished granite slab flooring / dado / Wall claddingof approved shade other than black, colour and texture withnot less than 15-17mm thick graniteslabsover20 mmthick base cement mortar 1:4 (using crushed sand) laid and placedwith grey cement slurry includingfilling the joints with matching whitecement basedtile groutcomplete all as per specifications and drawings. 80 Providing and fixing 1st qualitydigital highlighter300 x 450 mm- wall tiles meeting all the technical specifications as per relevant codes and standardsas and as approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout compound meeting all the technical specifications as per relevant codes and standards of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. 81 Providing and fixing 1st qualityDigital highlighter 300 x 600mm- wall tiles meeting all the technical specifications as per relevant codes and standards and as approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout compound meeting all the technical specifications as per relevant codes and standards of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. 82 Providing and fixing minimum 15-17 mm thick gang saw cut mirror polished (pre-moulded and pre-polished) machine cut Granitefor kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels. 83 Extra (over Item No. 60) for providing edge moulding to Minimum 15 mmthick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 84 Section- F:Doors, Windows, Glazing & False Ceiling works Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make or approved equivalent meeting all the technical specifications as per relevant codes and standards conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)Notes: 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. 5)Detailed fabrication drawings to be prepared and got approved by Project Engineer. 85 Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) 86 Extra over above item for providing Colour Anodizing / Dyed anodizing Aluminium sections of approved colour with matching colour fittings. 87 Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item). 88 Withclear float glass panes of 6.00 mm thickness 89 Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc. with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-inCharge. 90 With tinted toughened floatglass panes of 6.00 mm thickness 91 With frostedglass panes of 6.00 mm thickness 92 Providing and fixingapproved quality stain less steel body roller wheelsfor slidingshutters 93 Providing and fixing approved quality and shape star locks cum handle for sliding shutters 94 Design, fabrication, supply and installation of frameless clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittingsfor swing doors, hunged on floor spring, , S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimumthickness 25 microns) Aluminium C channels (25 mm X 25 mm X 1.5mm thick)and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent/plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. Note: Shop drawings to be prepared by the contractor as per the site conditions and the same shall be submitted for approval of Project Engineer before procurement. 95 Frameless fixed panels using 12mm thick clear toughened float glass including making cutouts, finishing the edges sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings shall be paid under relevant Item) 96 Frameless openable panels (swing doors) using 12mm thick for door leaves including making cut outs/ holes, finishing the edges with crystal edge polish ,sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings, locks & floor springs shall be paid under relevant Item) 97 Providing, supplying and fixingTop & bottom patch fittings with covers to suit floor springs & free pivots . 98 Providing, supplying fixing of Over panelpatch fittings withbacking plate and pivots 99 Providing, supplying fixingofhigh light to side light / corner link patch fittings with covers to suit floor springs & free pivots . 100 Providing, supplying fixingof connectinglink patch fittingsfor two or four glass 101 Providing, supplying fixingof Floor Spring with spindle insert closing force EN3, EN4,EN6with stainless steel satin finish cover plate complete including makingcut outs on floor & finishing the same complete. 102 Providing, supplying fixingofUniversal Centre lock with strike Plate 103 Providing, supplying fixingof corner lock with strike plate 104 Providing, supplying fixingofwall to glassconnectingpatch fittingsforfixed glass 105 Providing, supplying and fixing back to back Stainless steel Handle of 720 mm long 106 Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approved surface design and edge profileplaced in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centers along the length of ceilingwith 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centersand thereafter in directionvertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mmshall be inserted to form a grid size of 600 x 600 mm resting on the periphery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness.The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge.The main teesto besuspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanized spring steel leveling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment). 107 False Ceiling- tiles- Cosmos / Spintone / Hexa / Quadra Models with micro look system. 108 Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards of100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KCplaced in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sectionswherein the ceiling sections of 0.55 mm thickshall be suspended at 1200 mm centres along the length of ceilingwith 4mm dia G.I wires/ 1 mm thick strip hangers made ofG.I sheet sections with necessary level adjusters andinter channelsof 0.90mm thick with connecting clips andresting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge.The main teesto besuspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment)Notes: For Item Nos. 68 & 69 - (1) The mode of measurement shall be actual area of False ceiling and no deduction will be made for light fittings and diffusers. (2) Quoted Rate shall also includes: i) Anchor Fasteners for Drop rods.ii)Providing additional GI channel/angle/or any other suitable section for fixing of vertical member at junction of level difference in false ceilingwherever required.(3)Contractor has to submit shop drawing for the system for approval of Engineer-in-charge before proceeding with the work. (4)Work should be carried out as per manufacturers specifications andonly through approved executor/applicator and in co-ordination with the agency of HVAC /Mechanical/Electrical work and no extra will be paid for the same. (5)False ceiling workin any area should be commenced only after clearance from departmental representatitive is sought in writing for completion of HVAC ducting work. No additional claim, whatsoever, will be entertained by the Department in this regard. 109 Providing and fixing of Hollow metal fire rated (2 hr fire rating) Single leaf / double leaf doors of specified size as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Test certificates shouldbe available for vision lites /panels as part of the fire door assembly. Independent glasstest certificates will not be accepted. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer of approved equivalent quality.Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. Door shutters shall be ofG.I sheet 18 gauge thick with necessary stiffners. Thickness of the door shutter shall be as per design or minimum 40 mm). All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test. 110 Extrafor providing and fixingfurniture fittings for Hollow metaldoors / Hollow metal fire door, completeas per specifications and as directed by Engineer-In-Charge. 111 304 Grade stainless steelBall bearing hinges of size 100x75x3mmor as directed by by Engineer-In-Charge withrequired screws etc. 112 Door Closer with standard arm, includingrequired screws etc. 113 Dead Lock with both side Key Cylinder 114 SS Pull - H- Type handle- 32mm Dia & 600 mm Long 115 Fire rated Clear Glass- 200mmx 300mm 116 Providing and fixing single point lock cum handle foraluminium openable windows / top hung shuttersof approved quality complete all as per specifications and as directed by the Engineer-in-charge. 117 Providing and fixing locks for aluminiumsliding window shutterswith(Over all size of 204mm x 23 mm) of approved type all as per specifications complete as directed by the Engineer-in-charge. 118 Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters,making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge. 119 Second class teak wood 120 Providing and fixingFRPdoor shuttersflush door / panelled type with plain colour or wooden veneer finish of approvedquality,design & colour made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foamand fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 121 35 mm thick panelleddoor type of approved coloursincluding the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. 122 Providing, supplying and fixing hollow metal flush steel doors frame & shutter 40 mm thick consisting of door frame and shutters and all hardware fittings, frame of 143mmx57mm sizemade out of 1.60mm thick G.I sheets and shutters made of 1.20mmthick sheets, hollow portion filled with Honey Comb Craft paper including necessary stiffners in shutters and frame, vision panel of specified size withglass as specified. provision for fixing required hardwares, frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete / fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge (Hardwares & vision panels will be measured under relevant Item). 123 Single Door shutter with Frame 124 Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked transparent or dyed to required colour or shade with necessary screws etc. 125 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge. 126 Providing and placing in position suitable PVC water stops conforming to IS 12200for construction / expansion joints between two RCC Members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as per specifications and as directed by the Engineer-in-charge 127 150 mm wide water stopper 128 Providing cement based water proofing treatment to the new terraces, chajjas, cleaning the concrete surfaces, giving injections to the top slab as required with cement and approved waterproofing compound solution to fill up all inherient holes, voids, honeycombs etc. in the concrete slab, setting brickbat coba in waterprrof mortar with necessary gradient for easy flow of water and continue the treatment along the inner faces of parapet or other adjoining wall up to a height of 300 mm in the shape of vattas, with waterproof plaster finished smooth with trovel in cement / geru with false markings of 300 mm squares complete as directed by the Engineer-in-charge 129 With Average thickness of 120 mm and minimum thickness atkhurra as 65 mm using river sand / crushed sand. 130 Average 65 mm thick for chajjas using river sand / crushed sand 131 Extra over 120 mm thick cement based water proofing for providing and laying brick bat cobain roof(i) Laying brick bats with mortar using broken brick bats 25 mm to 115 mm size with 50% of cement mortar 1:4 (using crushed sand) admixed with proprietary water proofing compound as per manufacturers specifications conforming to relevant ISand approved by Engineer-in-charge over 20 mm thick layer of C.M 1:4 (using crushed sand) to required slope complete as directed by the Engineer-in-charge.(Measurement will be over and above the average thickness of 120 mm only). 132 Providing and laying water proofing treatment in sunken portions of WCs, bath rooms etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg / sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m.including injecting cemnt slurry .This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg / sq.m mixed with water proofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using crushed sand) admixed with proprietary water proofing compound conforming to relevant IS and approved by Engineer-in-charge including mixingfibre at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slury in bottom and all the sides of sunken portion, complete as directed by the Enginer-in-charge. The treatment to be tested for water tightness before filling the sunken areas. 133 Providing, painting and finishing walls with two coats of exterior emulsion painton sand face plaster /plain plaster & concrete of required shade over new work including base coat of water proofing cement paint, preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge. 134 Providing and applying wall painting two coats on new work with premium plastic emulsion paintto give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge 135 Providing, applying wall painting two coats with Lustur paintto give an even shade over acoat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge 136 Providing and Painting twocoats of synthetic enamel paint on steel surfaces to give an even shade over aprimer coat including preparation of the surfaces, scaffolding completeas per specifications and as directed by the Engineer-in-charge 137 Providing & applyingSynthetic plaster / Textured Coating of approved quality with finishes of minimum 2 mm thickness based on synthetic fibre & chemicals having acid, alkalies, fire & fungus resistance properties of approved shade on plastered surface/ concrete surface at all levels in the same pattern of facia blocks with grooves, bands for different offsets in different colours as per approved sample including required cost of Steel Double scaffolding.The item shall include applyingapproved equivalent quality synthetic plaster with one base coat by trowelling followed by 3 coats of finished paint by brush supplied by same manufacturer, providing decorative finish as required including preperation of plastered surface to receive approved equivalent quality plaster, cleaning the surface including cost of scaffolding and cost of all materials, labour etc. complete as per manufacturers specifications and as directed by Engineer. 138 Providing and paintingTWO coats of synthetic enamel paint on new wooden surfacesof required colour to give an even shade over an under coat of suitable shadeprimerof approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge 139 Providing and painting walls with (TWOcoats) of approved shade of high build protective , elastomeric water proofexterior gradepaint of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturers specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2and 2 coats of finishing coat without water all as directed byEngineer-in-charge. 140 Providing and applying white cement based wall puttyover concrete or Plastered surfaceup to 3 mm thickto get uniform surface free from undulationincluding cleaning complete all as directed by the Engineer-in-charge 141 Providing and Painting with Epoxy PU paintusing 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of 50 micron thickness over steel surfaces at all locations prepared and applied as per manufacturer specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat) on steel surfaces 142 Dismantlingplain cement concretemanually / by mechanical meanscarefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge. 143 Dismantling of RCC works carefullymanually without damaging adjacent structures excluding cutting of reinforcementincluding stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge. 144 Extra(over Item No. 93)for cutting of reinforcement in RCC, stacking the same and returning the steel scrap to the departmental stores all as per direction of Engineer-in-charge. 145 Dismantling of RCC works includingCuttingand stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. 146 Demolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unservicable materials separately including cutting reinforcement bars all as directed at site. 147 Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. 148 Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. 149 Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows)of area 3.00 Sq.M and below. 150 Dismantling doors, windows and clear storey windows (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows)of area beyond 3.00 Sq.M 151 Taking out doors, windows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) of area 3.00 Sq.M and below. 152 Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) of area beyond 3.00 Sq.M 153 Dismantling steel work in single sections including dismantling and stacking within 100 m leadIn R.S Joists,Angles etc. 154 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead. 155 SECTION-G: Internal& External Water SupplyProviding and fixing to the inlet mouth of rain water pipe cast iron dome grating 15 cm diameter and weighing not less than 440 grams. 156 Providing,laying , jointing, fixing and testing heavy quality(ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cmhydraulic pressurewith a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes withISI markedC -Class heavy quality pipes. 157 15 mm dia G.I pipe 158 20 mm dia G.I pipe 159 25 mm dia G.I pipe 160 32 mm dia G.I pipe 161 40 mm dia GI pipe 162 50 mm dia GI pipe 163 Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make or approved equivalent meeting all the technical specifications as per relevant codes and standards including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge. 164 15 mm n.b. 165 20 mm n.b. 166 25 mm n.b. 167 32 mm n.b. 168 40 mm n.b. 169 50 mm n.b 170 Providing and fixing 50 mm dia brass ball cock of heavy quality of following sizes with arm rod and Plastic Ball floats completeas per specifications and as directed by the ProjectEngineer. 171 Providing and fixing 15 mm dia C.P brass bib cock of heavy qualityas directed by the Engineer-in-charge. 172 Providing and fixing 15 mm n.b. C.P Brass open stop cock of Heavy Quality as directed by the Engineer-in-charge 173 Providing and fixing 15 mm n.b. C.P brass concealed stop cock of Heavy Qualityas directed by the Engineer-in-charge. 174 Providing and fixing 15 mm n.b. C.P brass Angle cock of heavy qualityfor wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge. 175 Providing and Fixing 15 mm CP brass Angle stop cock - quarter Turn as per specifications and as directed by the Engineer-in-charge. 176 Providing and fixingCP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long. 177 Providing and fixing 15 mm C.P brass pillarcock of heavy Quality and as directed by the Engineer-in-charge. 178 Providing and fixing heavy quality health faucetwith 1.50 metres long flexible hose (handshower) with wall brackets and type as per specifications and as directed by the Engineer-in-charge 179 Providing and fixing heavy quality 15 mm urinal flush cock as per specifications and as directed by the Engineer-in-charge. 180 Section- H: Drainage & Sanitary AppliancesProviding and fixing square mouth S.W. gully trap P type of 150 x 100 mm sizecomplete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design 181 Providing and laying non pressure NP2 class RCC Hume pipeswith collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete 182 100 mm Dia RCC Hume pipe class NP2 183 150 mm Dia RCC Hume pipe class NP2 184 250 mm Dia RCC Hume pipe class NP2 185 300mm Dia RCC Hume pipe class NP2 186 Providing and constructioning Inspection chambers of Internal size clear dimension of 900 x 600 mm in 230mm thick brick masonry with cement mortat 1:4over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item) 187 Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item) 188 Supplying and fixing Cast IronMan hole or Cast Iron Steps, cover, grating ofweight as specified in the drawings or as directed by the Engineer in charge. 189 Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This includeds jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer 190 25 mm outer dia CPVC pipe (External) / open 191 32 mm outer dia CPVC pipe (External) / open 192 40 mm outer dia CPVC pipe (External) / open 193 50 mm outer dia CPVC pipe (External) / open 194 Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specialsconforming to relevant IS code including jointing with seal ring / with PVC solvent adhesive including fixing in walls usingclampsetc completeall as per drawings, specifications and as directed by the Engineer-in-charge 195 SWR PIPE 110 mm O/D 196 Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, Y collars, cowl etc for soil, waste and ventilation pipes conforming to IS:3989 or Cast iron hubless pipes conforming to IS: 15905 of approved quality including cost of jointing with spun yarn and molten lead / drip seal of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. 197 75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast iron hubless pipes as per IS : 15905 198 100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kglead / joint or Cast iron hubless pipes as per IS : 15905 199 Providing, supplying, fixing in position in walls Rain water down take pipes usingCentrifugally cast iron pipes (3.00 metres long) including required specials like bends, shoes etc forRain water down takepipes Conforming to IS.3989 or Cast iron hubless pipes conforming to IS: 15905 including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes,painting with primer , fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. 200 100 mm C.I rain water down take pipe with 1.00 kg lead / joint conforming to IS:3989 /Cast iron hubless pipes conforming to IS: 15905 201 150 mm C.I . rainwaterdown take pipe with 1.20 Kg lead / joint conforming to IS:3989 /Cast iron hubless pipes conforming to IS: 15905 202 Providing and fixing Lead Sheet Flashing of about 450 mm x 450 mm size made out of 1.5 mm thick lead sheets including forming to required shape, dressing, fixing to mouth of rain water pipes with necessary bitumen, cement mortar, providing C.I. grating etc. complete as per specification for rain water downtakes of size upto 150mm n.b. 203 Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating ,complete all as specifications and drawings and as directed by the Engineer-in-charge 204 Providing and fixing heavy quality stainless steel / C.P brass grating as specified for floor traps / nahani traps all as directed by the Engineer-in-charge 205 SS Grating 125 mm dia 206 Providing and fixing 150X 150 mmcast irongrating of required shapefor rain water down takes at roof includingchipping andgroutingcomplete all as directed by the Engineer-in-charge . 207 Providing and constructing storm waterchambers of Internal size clear dimension of 900mm x 600 mm in 230 thick brick masonry with cement mortat 1:4over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement,embedding theC.I frame and cover / RCC precast slab by making suitable rebate in concrete and fixing cast iron steps if necessary at 300 mm intervals complete as directed by the Engineer-in-charge. Depth of chamber not exceeding 900 mm. (Excavation, soling, cast iron cover, C.I steps and precast slabwill be paid separately under relevant item) 208 Providing and fixing Wall Mounted EWCWhite Colour with P or S Trapwith solid seat and lid , 32 mm diaFlush Valve ,Flush bend , fixing EWC with C.P Brass screws, 15 mm PVC heavy quality inlet connection of 600 mm long, including fixing with a pair of 12 X 120 mm SS Rack Bolt, testing , commissioning & cleaning etc.complete all as per drawings and specifications and as directed by Engineer-In-Chargeat site. 209 Providing and fixing white vitreous china flat back single half stall urinal size 580 x 380 x350 mm / 610 mm with 32mm C.P flush value including standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Only G.I. pipes will be paid under relevant Item )Note: For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item . 210 Providing and fixing vitreous China wash basin with C.I. brackets, 15 m C.P. brass pillar tap,15 mm x 600mm longPVC Inlet connection,32 mm heavy quality C.P. brass waste couplingof standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. 211 White vitreous China counter top/counter below wash basin size 560*410 mm/560*450 mm with single 15 mm C.P. brass pillar tap (OVAL/ROUND Models ) 212 Providing and fixing PVC low level / high levelflushing cistern 10 litre capacityin white colour with flush pipewith manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge. 213 Providing and fixing 25 mm Dia G.I. inlet connection for flush pipe connecting with W.C. pan fromhigh level flushing cistern 214 Providing and fixing Heavy quality32 mm dia flexible PVC (semi-rigid) waste pipefor sink or wash basin including PVC waste fittings etc. complete all asper specifications and as directed by the Engineer-in-charge 215 Providing and fixing 6 mm thick mirrors of size600 x 450 mm with bevelled edges complete with 6 mm thickasbestos sheet back ground fixed to wallswith C.P. brass screws and concealedwashers complete. all as per specifications and as directed by the Engineer-in-charge . 216 Extra (over Item No. 138) for providing and fixingmirrors with - stainless steel 304 grade STUDS (with wall spacers)complete all as per specifications and as directed by the Enginner-in-charge 217 Providing and fixing stainless steeltoilet paper holderrecessed typewithS.S screws as directed by the Engineer-in-charge complete. 218 Providing and fixing 150 X150 mm soap dishofwhite viterious Chinaware,includingchasing walls making good the same after fixing the China Soap dishetc. complete all as per specifications and as directed by the Engineer-in-charge. 219 Providing and fixing heavy qualityC.P. brass waste coupling of 32 mm dia for wash basin and sink,Half threaded or Full threadedas directed by the Engineer-in-charge complete. 220 Providing and fixingheavy qualityCP brassbottle trap 31 / 32 mm ,single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal for wash basins / urinal etc all as per specifications and directed by the Engineer in charge. 221 Providing and fixing C.P brass towel rail600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge. 222 Providing and fixing 15 mm C.P brass tube 600 mm long with nuts andwashers complete for wash basins / urinals with all necessary acessories completeas directed by the Engineer-in-charge. 223 Providing and fixing 15 mm PVC inlet connection suitable for hot and cold water 600 mm long with nuts andwashers complete for wash basins/ Urinals etc. with all necessary acessories completeas directed by the Engineer-in-charge. 224 Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge. 225 Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of 4000 litre capacitywith WHITE SILICON coated and with suitable S. M. Ccover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge. 226 Section-I: Miscellaneous WorksProviding and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade madewith strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge. 227 Clearing Jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m / outside the periphery of the area cleared as per specifications and as directed by the Engineer-in-charge. 228 Providing and Fixing Anchor Fastner including drilling in concrete as per requirementfor fixing EPs or other structuresallas specified by the manufacturer complete all as per specifications and drawings. 229 16 mm diameter 75 mm Long 230 16 mm diameter 100 mm Long 231 16 mm diameter 150 mm Long 232 16 mm diameter 200 mm Long 233 20 mm diameter 100 mm Long 234 Providing and fixing Mechanical Splicing using threaded coupler of all types to the reinforcement bars of specified diameter and grade using high yield strength standard couplers of specially produced steel to join ribbed bearing bars machine cut end to end. Cost to include necessary supply of threaded couplers of various diametres , transportation, coupling at site by mechanical means , erection at site, testing of random samples, testing at site, protection of threaded ends using PVC covers, threading of rebars etc. complete. Cost to include necessary testing of joints ( 0.5% of the total joints) at site for tensile strength and as required by Engineer-in- Charge.Cost quoted shall include all materials and labour. 235 16 mm dia 236 20 mm dia 237 25 mm dia 238 Providing and fixing stainless steel urinal grab bar/wash basin Grab bar (confirming to grade SS 304, satin finish) consisting of 38 mm dia. 18 SWG stainless steel pipe duly bended in required shape and size, hinged with 3mm thick stainless steel rectangular sheet of required size having 6 nos. holes and u shaped stainless steel clamp for holding the grab bar including cutting, bending welding grinding, polishing and fixing with suitable sized and nos. of dash fasteners complete as required. All bends to be neatly finished miter joints complete etc. as required. 239 Labour charges for dry stone pitching 22.5 cm thick by using good soling stones available at site, preparing the surface complete. 240 Part-II : Mechanical Works Split AC units : Supply, installation, testing & commissioning of split AC of followingnominal capacity and accessoriesas per tender specifications 241 2TR 242 1.5TR 243 1TR 244 Copper pipe with insulation :Supply and installation of Copper pipe with insulation suitable for following capacity split ACmachine (quantity for single run ) 245 2TR 246 1.5TR/1TR 247 Drain pipe: Supply and installation of5/8 inch dia PVC Braided flexible pipe withinsulation as per tender specification. 248 Casing capping : Supply and installation of PVC casing-capping of following cross sectional size as tender specification. Location : for AC pipe and drain 249 150mm x 50mm 250 100mm x 50mm 251 Electric cable:Supply and installation of Electrical wiring/cables of three/four core x 2.5 mm² (or as per split AC requirement foritem no 155) 252 Exhaust fan: SITC of propeller type exhaust fans with louvers offollowing sweep dia ( approx.) along with all accessories and fixture as per tender specifications. 253 200mm 254 300mm 255 Part-III : Electrical Works Lighting Distribution Board as per TSS1 256 Power Distribution Board as per TSS2 257 10way VTPN DB with 160A Incomer as per TSS3 258 8way VTPN DB with 63A Incomer as per TSS4 259 4C 25sqmm Al conductor XLPE cable as per TSS 5 260 20 Pair Telephone cable as per TSS6 261 Optical fibre cable as per TSS7 262 4pair instrument cable TSS8 263 End Termination of 4C 25sqmm Cable as per TSS9 264 End terminations of 20Pair Telephone as per TSS10 265 End terminations of Instrument cable as per TSS11 266 Point Wiring for below points as per TSS12 267 Primary Power Points (16A+6A) 268 Secondary Power Points 269 Primary Lighting Points 270 Secondary Lighting Points 271 Highbay Primary Lighting Points 272 Highbay Secondary Lighting Points Secondary 273 Terrace lighting Primary points 274 Terrace Secondary lighting points 275 Primary Security Lighting Points 276 Secondary Security Lighting Points 277 Primary Ceiling Fan Pointswith switch and regulator 278 Secondary Ceiling Fan Points with switch and regulator 279 Primary Exhaust Fan power Points 280 Secondary Exhaust Fan power Points with switch and socket 281 Split AC Power Points 282 Primary FA/PA Points 283 Secondary FA/PA points 284 Point wiring for call station point 285 Network combo points 286 LED Recess type Lighting Fixtures as perTSS13 287 LED square type surface Lighting Fixture as per TSS14 288 LED Lighting Fixture Highbay type as per TSS15 289 Outdoor Security LED Lighting Fixture as per TSS16 290 LED Terrace Lighting Fixture as per TSS17 291 LED Flood Lighting Fixture as per TSS18 292 LED Batten Lighting Fixtures as per TSS19 293 42U Mounting Rack with accessories as per TSS20 294 15U Mounting Rack with accessories as per TSS21 295 24 Port rack mount LIU with splicing of OFC as per TSS22 296 24 Port Jack Panel as per TSS23 297 3 Feet Patch cord (CAT 6) as per TSS24 298 Earthing Stations as per TSS25 299 Fire Alarm Terminal Box as per TSS26 300 PA Terminal Box as per TSS27 301 Perforated Cable Tray (size 300 mm X 50mm) with accessories as per TSS 28 302 Cu Earthing wire 8 SWG as per TSS 29 303 Air Terminal as per TSS 30 304 Test Link with Enclosure as per TSS31 305 MS fabrication item as per TSS32 306 MS Powder coated item as per TSS33 307 Self Illuminated signage as per TSS34 308 GI Sleeve as per TSS35 309 GI 25 X 6 mm Earthing strip as per TSS36

BRR:8649145 Tender for Providing Paver Block Pavement With Dry Fixing Pipe Culvert At Perujunai In Thiruvengaivasal Panchayat.(140 X 3M) In Annavasal Panchayat Union In Pudukkottai District - Pmagy - 2025-2026

BRR:8649144 Tender for Providing Paver Block Pavement At Perujunai Bus Stop To Matha Kovil Theru At Peruchunai In Thiruvengaivasal Panchayat.(129 X 3.50M) In Annavasal Panchayat Union In Pudukkottai District - Pmagy - 2025-2026

BRR:8648630 Integrated Development Of Craft Center At Sambalpur- 1 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 2 Additional cost for Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 3 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 4 Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 5 Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. 6 R.C.C. work ofM-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 7 R.C.C. work ofM-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 8 R.C.C. work ofM-25 for beam & column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 9 Ground Floor 10 R.C.C. work ofM-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 11 Ground Floor 12 R.C.C. work ofM-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 13 Ground Floor 14 R.C.C. work ofM-25 for slope roof having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 15 Ground Floor 16 Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction ofEngineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) 17 Ground Floor 18 Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 19 Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 20 Ground Floor 21 Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 22 Ground Floor 23 Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 24 Ground Floor 25 Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. 26 Ground Floor 27 Providingtile flooringexterior gradevitrified tiles of premium grade 10mm thick conforming to IS 4457 of 300mmx300mm of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 28 Ground Floor 29 Providing 40cmx40cm sizespecial plain/printed series matt finish ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. 30 Ground Floor 31 Providing 30cmx60cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. 32 Ground Floor 33 Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 34 Ground Floor 35 Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 36 Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. 37 Providing and fixing in position WPC frames of following approved size to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. 75mm x 50 mm 38 Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 39 Providing and fixing lockable openable system Aluminum works for openable doors applications. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame. The outer frame Depth will be 72mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment. Glass to be used is 6mm – 8mm toughened, make Saint Gobain. The system should allow the application of glazing or panels with thickness up to 5-8mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1year warranty on wearing parts 40 Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / SHUECO/ ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 104 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5- 6 mm clear toughened.The system should allow glass thickness up to 10 mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 41 Providing and fixing Anodized System Aluminum fixed windows of TOSTEM / SHUECO/ ALUMIL make, suitable for 2.4 KPA wind load. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 6 - 8 MM toughened depending on grid size. Beyond 6000 mm width, MS section (size 61 x 122 mm) coupling to be used with cover profiles of same anodized colour. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 42 Providing and fixing Anodized System Aluminum glass louvers of TOSTEM / SHUECO/ ALUMIL make natural air flow ventilators. The extruded aluminium sections shall be made from Grade 6063- T5 Anodized with Tex guard coating. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 50 - 72 mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts. 43 Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 44 Supplying, fitting and fixing of M.S grill gates with top and bottom rails (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25%) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 45 Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/Cand stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. 46 Providing & fixing of Greenlam Sturdo Essentia Collection- Serene Restroom Cubicle (of following standard dimension which includes 600mm door size width) self-supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available color hardwares as per manufacturers specifications & Architects instructions like (1) Self closing hinges in Nylon Polyamide grade 6 in gloss finish in available colors (2) Soft closing thumb turn lock made in nylon polyamide grade 6 in gloss finish in available colors (3) Single Coat hook in nylon polyamide grade 6 in gloss finish, available in similar available colors (4) U & F- profiles in Aluminium alloy grade 6063-T6 with powder coating in available colors (5) Nylon polyamide grade 6 Adjustable Leg (6) Top rail along with Nylon Polyamide grade 6 with end cap is a Round D shaped extrusion made of Aluminium alloy grade 6063-T6 with Powder Coating in available colors, (7) Rubber, (8) Screws & wall Plugs (SS316). The top fitting should consist of Matt finish aluminium alloy grade 6063-T6 in avilable colors, which will get fixed on pilasters with SS Screws, All screws will of 316 Grade in stainless steel. All pilasters are supported by grade- 6 Nylorn Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Toilet Cubicle Partitions with standard dimensions of 1995mm Height x 1000mm Width x 1500mm Depth (which includes 600mm door width) 47 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 48 Ground Floor 49 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 50 Ground Floor 51 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 52 Ground Floor 53 Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 54 Ground Floor 55 Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 56 Ground Floor 57 Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 58 Ground Floor 59 Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 60 Ground Floor 61 Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 62 Ground Floor 63 Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 64 Ground Floor 65 Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. 66 Ground Floor 67 Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. 68 Providing kota stone flooring using Rajasthan kota stone of approved quality, colour and size of 25mm minimum thick in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the kota stone with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the kota stone, if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 69 25 mm. average thick artificial stone flooring with cement punning laid to proper slope with cement concrete of proportion (1:2:4) using screened and washed sharp sand for mortar with black hard crusher broken granite stone chips of approved quality and from approved quarry, washed and cleaned laid in two layers i.e. the bottom layer being 19 mm . thick and top layer of 6mm. thick with 12mm. to 20. size black hard crusher brokenstone chips (20mm size chips not to exceed 25%) including chipping and chiseling and cleaning the top surface of the floor slabs in upper floors, including rounding of corners, watering and curing with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge 70 Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) 71 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 72 Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. 73 Construction of granular sub-base by providing Close graded Granular subbase Grading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) etc complete as per direction of Engineer-in-charge. 74 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works 75 Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechine vibrated free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 76 Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 77 Providing and painting two coats with synthetic enamel paint over a coat of cement primer of approved quality and approved shade confirmming to ISI on cement work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 78 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. 79 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 80 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge 81 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001 82 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm 83 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm 84 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 85 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. 86 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. 87 Plastic Waste bin Rectangular alongwith fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 350x350 mm Top Dia.250x250 mm Bottom Dia.850 mm Height pair Sintex, Nilkamal, Otto, Aristo 88 Plastic Waste bin without Wheel with Push type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level capacity 60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 89 Plastic Waste bin without Wheel with Swing lid type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 90 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding the cost of imported earth, sludge or manure). 91 Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. 92 Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead and lift. 93 Supplying and stacking at site dump manure fromdumping place nearest to site of work.(manure in stack will be reduced by 8% for payment) with all lead and lift. 94 Screened through sieve of I.S designation 20 mm. 95 Screened through sieve of I.S designation 16 mm. 96 Screened through sieve of I.S designation 4.75 mm. 97 Rough dressing the trenched ground including breaking clods. 98 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of up rooted vegetation with all lead and lift. 99 Fine dressing the trenched ground. 100 Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/and good earth to be paid separately). 101 Mixing earth and sludge or manure in proportion specified or directed. 102 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 103 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 104 Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). 105 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 106 Holes 60 cm dia, and 60 cm deep 107 Holes 45 cm dia, and 45 cm deep 108 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 109 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm 110 Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. 111 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. 112 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. 113 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) 114 Trees Plant 115 Shrubs Plant 116 Hedge Plant 117 Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 118 Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. 119 Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 120 Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 121 Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. 122 Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 123 Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. 124 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 125 Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. 126 Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 127 Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 128 Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 129 Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. 130 Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. 131 Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge. 132 Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. 133 Supply and stacking of Acacia auriculiformis plant of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 134 Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 135 Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. 136 Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. 137 Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. 138 Supply and stacking of Ficus nuda plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. 139 Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v 140 Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 141 Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. 142 Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. 143 Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. 144 Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. 145 Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 146 Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing springmade up ofalluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction of Engineer-in-charge. 147 Supplying all materials, labour, T&P and fixing 15mm dia CPBib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca 148 Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 149 TOTAL FOR CIVIL WORKS-(A) 150 PH WORKS 151 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20087 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 152 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet of Hindware make having cat no 20098 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 153 Supply all materials, labour,T&P for fitting and fixing of Pneumatic tank 3/6L with full frame andPneumatic faceplate in polished chrome of Jaquar make having cat no 517444 and 525732 or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, connecting pipe with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 154 Supply all materials, labour,T&P for fitting and fixing of dual flush PVC cistern of hindware sleek essence make or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 155 Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 49cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. 156 Supplying and fixing urinal of hindware make having cat no 60022/60023 or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. 157 Supplying and fixing 12mm thick toughened glazed urinal division plate of approved size with etching and polishing including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge. 158 Supplying all materials, labor T&P for fitting and fixing in all floors fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. 159 Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Jaquar Cat. No.-FLR 5083NK or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 160 Supplying all materials, labour, T&P and fixing standard sized15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 161 Supplying all materials, labour, T&P and fixing standard sized15mm dia pillar cock of Jaquar Cat. No.-FLR 5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 162 Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 163 Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 164 Supplying all materials, labour, T&P and fixing standard sizedCP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 165 Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 166 Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 167 Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 168 Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 169 Supplying all materials, labour, T&P and fixing standard sizedCP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 170 Providing all materials, labour,T&P and fittings and fixing of flush valve of Jaquar Cat. No.-PRS 073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 171 Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge 172 Providing and fixing fragrance disperser of Euronics make having cat no EA44 etc complete as per PH specification and direction of the engineer in charge 173 Providing and fixingcircular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge 174 Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 175 15 mm dia 176 20 mm dia 177 25 mm dia 178 32 mm dia 179 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 180 40mm dia 181 50mm dia 182 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 183 75mm dia 184 110mm dia 185 Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. 186 110mm dia Single Junction with door 187 110mm dia Double Junction with door 188 110mm dia Cowl 189 110mm dia Plain Bend 190 110mm dia SWR Door Bend 191 125mm x 110mm Gulley Trap 192 110mm dia Tee with door 193 110mm dia Single Junction without door 194 110mm dia Socket Plug 195 110mm dia Pipe clip 196 110mm diaCoupler 197 75mm dia Plain Bend 198 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 199 25mm Dia 200 32mm Dia 201 40mm Dia 202 50mm Dia 203 Providing & fixing of 50mm dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 204 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 205 Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 206 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 207 Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. 208 Supplying all materials, labour, T&P and fittings and fixing of 1000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 209 Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. 210 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 211 150mm dia 212 200mm dia 213 Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. 214 150mm Dia 215 200mm Dia 216 Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. 217 Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. 218 Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) 219 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 220 Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 221 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 222 Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) 223 150mm Dia 224 200mm Dia 225 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 226 Supplying and filling the pipeline trench with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 227 Supplying and construction of 100 user septic tank of standard size as per drawing, design and direction of Engineer in charge. 228 Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. 229 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 230 Rocky terrain with boulder formation for 300m depth 231 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). 232 Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 233 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 234 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 235 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 236 Supplying all materials, labours, T&P, fitting and jointing of 80mm dia double flanzed column GI pipe confirming to IS 1239/1968, medium class having IS mark of approved make / tata medium series with socket and screw joint including supply, fitting and fixing of required number of IS certified fitting, cutting threads to pipe and pipes to length including wastage providing necessary offsets and lay screw with extra socket and jam nut including fixing to wall and floors with supply of holder bats, clamps, fixing wooden plugs in walls complete as per direction of Engineer-in-charge. 237 Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having discharge 30m3 per hour and 70mtr head including installation of pump set withwire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell) 238 Supply, installation, testing and commisioning of automatic star delta control panel suitable for 10HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor) 239 Protection to the Borewell with CC base 240 3 core 6.0sqmm copper flat cable 241 Bore Cap 242 Clamp 243 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe (Sch-80)confirming to ASTM D1785 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 244 80mm Dia 245 65mm Dia 246 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 247 65mm Dia 248 80mm Dia 249 Providing & fixing of following dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 250 65mm Dia 251 80mm Dia 252 Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in-charge. 253 Sluice Valve Chamber (0.75x0.75x1.20mtr) 254 Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. 255 Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. 256 INTERNAL ELECTRIFICATION WORK 257 TRAININING ROOM AND SKILL DEVELOPMENT CENTER 258 Wiring 259 Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 260 Primery point 261 Secondary point 262 Call bell point 263 Wall bracket fan/Air circulator point specification same as above. 264 Exhaust fan point specification same as above. 265 Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board 266 Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) 267 Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 268 Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 269 Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 270 Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. 271 Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover. 272 Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. 273 Submains: 274 Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) 275 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. 276 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. 277 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. 278 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. 279 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. 280 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. 281 CONTROL PANELS : 282 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. 283 MAIN PANEL (TRAININING ROOM AND SKILL DEVELOPMENT CENTER). Incoming - (MCCB: 1 No 250A (36kA) 4P thermal magnetic(TM) release with ROM & spreader links. SPD: 1No 50kA 4P T1+T2. MCB C: 1 No 63A 10kA 4P.CHANGE OVER SWITCH: 1 no 250A 4P On Load Change OverSwitch.); Outgoing -(Busbar: 2 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 4 Nos 100A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for DB Training Room & Skill Development Center, DB Community Hall, OAT & Spare. MCCB: 5 No 63A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for Pump Room, STP DB, External Light Feeder Panel, Solar Input & Spare.); Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 284 DB TRAININING ROOM AND SKILL DEVELOPMENT CENTER (TRAININING ROOM AND SKILL DEVELOPMENT CENTER).Incoming- MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 100A 4P On Load Change OverSwitch); Outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]. Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 285 Distribution Board COMMUNITY HALL:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 286 Distribution Board OAT:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); Outgoing -[ Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 2 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 2 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 2 Nos 40A 10kA 2P for SPN BDB/ SPARE. MCB C 8 Nos 32A 10kA 2P for Power Cercuit/SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 287 Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. 288 4way TPN BDB for Light: Incoming - (1 no of 25A 30mA 4P RCCB); Outgoing-(12 nos of 6-16A SP MCB C) 289 4way TPN BDB for Raw Power: incoming - (1 no of 63A 4P MCI); Outgoing - (12 nos of 10-32A SP MCB) 290 12 way SPN BDB: incoming- (1 no of MCB C 32A (10kA) 2P); Outgoing- (10 nos of 6-10A SP MCB C. Cable Laying) 291 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 292 4 core x 240 sqmm A2XFY 293 4 core x 25 sqmm A2XFY 294 Cable termination: 295 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. 296 4 core x 240 sqmm A2XFY 297 4 core x 25 sqmm A2XFY 298 Earthing 299 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. 300 Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 301 Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. 302 Fittings & Fixtures 303 Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with allaccessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. 304 22 watt LED extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN021C LED22S complete. 305 12 watt LED extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN 021 LED12S 6500 complete. 306 Inverter type 9 watt LED Bulb on existing holder of approved make 307 12 watt LED, Brightest metal surface light with 100lm/W light output, Full low diffusor allows for wider light spread of 270 degrees, Aluminum die cast housing for better heat dissipation, Longer life of 30,000 hours^, Super slim design with a height of just 38mm allowing the product toblend seamlessly with the ceiling, Surge protection of 3kV with wide voltage protection of 160-360V similar to make Philips model name Metal FullGlow complete. 308 65-70 watt Highbay LED efficacy of 150Lm/W with its robust housing design and cater to diverse applications with multiple options of beam angles and suitable for surface mounting (with accessories) similar to make ‘Philips’ Cat no. BY515P LED100S 5700 complete. 309 36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B P LED 36S complete. 310 5 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 311 7 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 312 10 watt LEDTrack light, Long-lasting fixture, Robust metal construction, Functional, minimal design, Perfect fit for any home/outlet, Wide voltage protection from 160V–360V and surge protection up to 2KV, Premium white aluminium housing,No harmful UV radiation similar to make Philips Stanchion Track Light model no.31445 complete. 313 Track fo installation of track light similar to make Philips Stanchion Track model no 31442 complete. 314 48-50 watt LED Suspended 50mm aluminium extruded linear lighting luminaires with superior white powder coated finish (with accessories) similar to make ‘Philips’ Cat no. SP780P LED52S-6500 complete. 315 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete. 316 Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete. 317 Supply, delivery, installation, testing & commissioning of wall mounted air circulator 750mm sweep (Crompton make model nameAC750WALL / Havells/ Bajaj) 318 Supply, delivery, installation, testing & commissioning of single phase 600mm sweep 900 RPM heavy duty Exhaust fan(Crompton make cat no EXHD600-6-1/ Havells/ Bajaj) 319 Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’cat no Trans Air 12 complete. 320 Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Neo 6 complete. 321 Supplying and fixing Call bell Buzzer suitable for single phase, 230 volts, 1 Module of similar to make Legrand Myrius Cat no. 6792 50 complete. 322 Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I.box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing. 323 Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required. (more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.) 324 Testing, commissioning and charging of entire wiring system for TRAININING ROOM AND SKILL DEVELOPMENT CENTER. 325 Testing, commissioning and charging of entire wiring system for COMMUNITY HALL. 326 Testing, commissioning and charging of entire wiring system for OAT GREEN ROOM. 327 EXTERNAL ELECTRIFICATION (100kVA SUB-STATION) WORK 328 CABLING WORK 329 Supply of following size of PVC Armoured cables ISI marked. 330 4 core x 150 sqmm A2XFY 331 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 332 4 core x 150 sqmm A2XFY 333 Cable Trench & Hume Pipe 334 Construction of cable trench of size [1000mm(W) x 1000mm(D)] complete , base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing 335 Construction of cable trench of size [600mm(W) x 1000mm(D)] complete, base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing. 336 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 337 150mm dia RCC Hume pipe 338 250mm dia RCC Hume pipe 339 TRANSFORMER INSTALLATION WORK 340 Supply & fixing CT meter sheet steel enclosures made out of 16 gauge CRCA sheet ,double door with lock, neopraene gasket all around, two numbers earth lugs including painting ,padlock arrangement. Class 0.5 with O/P burden of 30VA 341 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 342 Supply installation and commissioning of 200Amp 11kv on load isolated air brake switch with braking capacity of 10kA complete with following accessories. Knife blade switches both Male/Female. Operating GI pipe with handle & rotating mechanism. Pad locking arrangement with pad lock. Scope also includes interconnecting AB switch OH line with 30sqmm AAC conductor & interconnection to pin insulator/HG fuse set by suitable Cu flexible strip .Spring earth of the handle ,earthing of switch etc. 343 Supply installation and commissioning of 11kV home gap fuse set on the double pole structure. The 11KV HG fuse set to be complete with 11KV insulators Cu horn gaps etc. The scope also includes interconnecting the HG fuse with transformer with 0 SWG HDB Cu conductor. (11KV, 200Amp, 3Pole) 344 Supply installation and commissioning of 11KV lighting arrester including interconnection by 30sqmm AAC conductor & clamp(12KV, 5KA) 345 Supply and fixing of substation bracket inj complete set. With 100x50x6 mm for MS channel, 75x40x6mm MS channel for AB switch and HG fuse, 50x50x5mm MS angle for Transformer (140Kg) including painting. 346 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 347 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 348 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 349 Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCCcover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 350 Supply of materials and installation of chemical earthing size of chemical earth bar 3 mtr, size of earth pit 3 X 2 X 9 chemical compound to be used 50 kg. There is an arrangements forterminationofcopper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 351 Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. 352 Supplying and laying 25 mm x 5mm G.I. strip on surface or in recess for connection etc as required. 353 Supply & fixing ofGInuts, bolts & washer of assoarted size for above work. 354 Supply installation and commissioning of 100 KVA, 11/0.4KV (AL) Transformer with tap changer, BIS Energy level-II with necessary hardware including unloading from truck, leading to the pole/plinth location and EMR test etc as required. 355 Supply & providing of 11K GI pin & pin insulators 356 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 357 Supplying and painting with Aluminium Paint where ever required for transmission line. 358 Supplying and painting with Black paint where ever required for transmission line. 359 Supplying and painting with Redoxide paint where ever required for transmission line. 360 Supply installation and commissioning LT Distribution Panel Board for 100KVA Transformer with MCCB, Aluminium Busbar for two Bay with Kitkat Fuse. 361 Supply installation and commissioning LT Busing cover in the LT site of the transformer 362 Supply and construct with all material for Boundary wall for fencing and anti climbing with M.S. Gate 5-0 x 8-0.Sand & Gravel spreading over the entire area. 363 Supply and construct with all material for plinth of size 5-0x5-0x6-0. 364 11 KV Single Circuit line 365 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 4 nos 366 Supply & fixing of(100 x 50 x 6)mm M.S Channel 367 Supply & fixing of11 KV V cross arm. 368 Supply & fixing of 11 KV top chanel.. 369 Supply & fixing of back clamp for cross arm 370 Supply & providing of 11K GI pin & pin insulators 371 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 372 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 373 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 374 Supply & installation of coil earthing 375 Supply & fixing ofassoarted nuts, bolts & washer for above work. 376 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 377 Supply & stringing with 80mm² insulated AAA Conductor. 378 Supplying and painting with Aluminium Paint where ever required for transmission line. 379 Supplying and painting with Black paint where ever required for transmission line. 380 Supplying and painting with Redoxide paint where ever required for transmission line. 381 Garding 382 Supply & fixing of(75 x 40 x 6)mm M.S Channel 383 Supply & fixing of No 8 G.I wire 384 Supply & fixing ofeye hook 385 SAFETY EQUIPMENTS & OTHER: 386 Supply and hanging of Shock Treatment Chart duly Laminated. 387 Supply & Laying of 8 mm Thick Rubber Mat (1mtr x 2mtr), ISI mark of 1100 V Grade. 388 Supply and Installation of 4 Nos. Fire Buckets on a Mild Steel Stand complete as per specification and requirement of Fire Safety Provisions. 389 Supply and Installation of 4.5 Kgs. Capacity CO2 type Fire Extinguisher complete as required. 390 Providing and fixing bi-lingual Danger HT notice board of 250mmx200mm as specified below,made of mil;d steel at least 2mm thick & vitreous enamelled signal red color on both sides as background & with insprictions in enamelled vitreous white color on front side for lettering as required. 391 Supply of First Aid box with all required accessories. 392 EXTERNAL ILUMINATION 393 Feeder Panel with timer 394 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. Incoming: 1 no 63A 4P MCCB (16 KA) type followed by 1 No 63-A 4 NO power contactor with Bypass Toggle switch & timer. Bus bars: 4 Nos.20x3mm E C Strips. Outgoing: 4 Nos 40/63-A, 4P MCB C (10kA). 4 nos 40/63 Amp 2P MCB C (10 KA).Complete duly factory wired as per SLD. Cable & wires 395 Junction Box 396 Supply, installation and testing ofCable Junction Boxes IP 66/67 “weather proof”, for outdoor installation with terminals, made of high quality Thermoplastic for cable size 10-16sqmm and box size 155mm x 210mm x 92mm (Hensel make or equivalent) 397 CABLES & ACCESSORIES 398 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 399 3c x 2.5 Sq. mm flexible Copper cable for connection of lamp from JB 400 2c x 6 Sq. mm Aluminum armoured cable. 401 4c x 10 Sq. mm Aluminum armoured cable. 402 4c x 16 Sq. mm Aluminum armoured cable. 403 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 404 Supplying and fixing of following dia ISI marked HDPE pipe with material grade PE-80 in ground/recess including excavation the earthl and making good the same in case of recessed conduit as required. 405 40mm OD PN-8, 3 mm thick 406 90mm OD PN-4, 3.5 mm thick 407 110mm OD PN-4, 4.3 mm thick 408 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 409 150mm dia RCC Hume pipe 410 Fittings & Fixtures 411 Supply of 7meter long aesthetically designed QUADRA MAST light pole. Pole shall made up of Hot Dip Galvanized Body andcoated with zinc rich primer & pure polyester powder coatingand finished with jet black colour and 3 coat Marine grade. The pole shall be suitable for fitting of 4nos of 100W rectangular design street light made up ofExtruded aluminium body and Clear toughend glass diffuser. Dimension of light must be 607 x 200 x 230mm. Body size of the pole will □150mm from bottom and 100mm size from middle to top. The Pole shall have base Plate□300 x 16mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge.(Make: K -lite Pole KP-2042-700 + KL-4461 Luminaries/ equivalent ). 412 Supply of 3 meter long aesthetically designed decorative lighting pole with 400mm height Cast Aluminium base, cast aluminium ring on the middle portion. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Bottom dia of the pole will be Ø139.7mm, Middle portion dia will be Ø76.1 mm and having base Plate of size □200 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Florian Pole KP- 4329/ equivalent). 413 Supply of 50W LED Post Top Light made up of Die Cast Aluminium base with spun aluminium top cover Body with clear Acrylic diffuser and having Dimension : Ø400 x 807 protected with IP 65, Surge Protection : 6KV, THD : <10% (Make: K -lite Imperial KL- 5444/ equivalent). 414 Supply, delivery, installation and testing of 4000mm long 100mm dia quadra extruded aluminium alloy pole with LED 45 watt post top light and foundation bolt and all fixing acessories with required size of rcc foundation as per direction of Engineer-in-charge. (K-Lite Pole cat noKP-5052, K-Lite Fitting cat no KL-5436 or equivalent),Pole made of extruded aluminium alloy (grade 6063) can achieve high strength and corrosion resistance in various atmospheric conditions, Pole design parameters vary depending on the type of bracket and loading factor, All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes, The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement.Built-in control box with service Can be Integrated with LED Modules. door including lock and safety chain (except 200 x 50).Earth connection. Safety class I, CE-Conformity mark,BIS - Conformity mark. 415 Supply, delivery, installation and testing of 8w LED Bollard 100mm dia 1000mm long for uniform illumination for pathways with required size of cc foundation as per direction of Engineer-in-charge. (K-Lite cat no KL-4823/ Ligman/ Simes/ Unilamp/ equivalent). Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Reflector system made of die-cast / spun aluminium. Non yellowing UV stabilized polycarbonate clear / translucent diffuser, Silicone gasket.Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cable entries for through-wiring of mains supply cable. Protection class IP54 / IP65. Integral power supply. Earth connection. Safety class I. CE-Conformity mark. BIS - Conformity mark. Suitable for operation on 240V, 50Hz single phase ac supply.

BRR:8648538 Providing And Laying 80Mm Thick Interlocking Paver Blocks M-40 Grade Both Side Drain Type-I Bpl Colony And Various Streets In Village Palwali In Ward No.34. (Div-V) Faridabad

BRR:8648137 Tender For Work Of Interlocking Tiles In Sheru Wali And Mangalam Tarpaulin Wali Gali At Ward-59, Old City Clock Tower. - Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). PWD SOR 2022 17.3 2 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre leadas per direction of Engineer-in-Charge. 3 S/L P:C:C (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273 } 4 S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 ( a). 5 First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etcall completed as per the direction of engineer - in - charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) 6 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM ) 7 S?L of stone ballast 22.40 to 53mm size with stacking for 10 measurment etc all complete 8 Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1 9 Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1 10 Supply & laying 80 mm thick Precase cement concrete ishape interlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plan dimension 200X(160+120mm) of O.P cement smoothing gloss finish,skid resistant manufacturered from rubber moulds M-30 GRADE AS PER SOR 2022. 11 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge. 12 R.C.C work with cement ,approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors &windows excluding supply of reinforcement and its bending ,but including its fixing and binding wire including necessary cantering and shuttering etc .and supply of all materials, labour, tools& plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra etc all complete as per direction of engineer in charge.(AS PER PWD SOR 2020/283 a .) 13 Steel reinforcement for R.C.C work including straightening ,cutting ,bending,placing in position and binding all complete upto plinth level mild steel and medium tensile steel bars DSR 2023 ITEM N.5.22.1 14 Deduct of old Tiles 15 Disposal of malwa with 8km distance

BRR:8648130 Tender For In Ward 38 Arthala, From Radha Rani Jewellers To Khara Kua Chowk And Khara Chowk And From Nanak To Vishan Singh Public School, Repair Work By Laying Drain And C.C. In The Damaged Lane. - Dismantling reinforced cement concrete or reinforced brick work including stacking of materials 2 Taking out existing cc interlocking paver blocks from foothpath/central verge including removal 3 Earth work in embackment filling ordinary soil excavation to be in the form of regular pits not exceeding 0.50m in depth earth work In embankment 4 Concrete with 4cm gauge brick ballaste fine sand of 1.25 f.m. and cement in proportion of 1:6:12 in foundation 5 M150 First class brick work in 1;4 cement & four coarsend mix mortar 6 12mm thick plaster with cement and coarsand of 1.25 Fineness moudules in 1:4 7 Supply and laying spreading and compacting22.4 mm to 53 mm size stone aggregate of specification in uniform thickness hand picking rolling with 3 wheeled road 8 Construction of un reinforced plane cement concrete pavement thickness as per design over a prepared sub base with 43 grade including construction joint 9 Cement concrete with 2cm gauge approved stone grit instead of 4cm gauge stone ballaste 10 R.c.c. work with cement approved coarsend and 2cm gauge approved stone grit in proportion of 1:1.5:3 in lintels of door window 11 S/F M.S. tor steel or plain in plain work such as R.C.C or r.b. work including brnding 12 Rising of main holl 13 Cartage of brick/stone ballaste kankar coal shingle or sand etc by head load upto 90 meter 3chains including loading and unloding but excluding stacking 14 Deduct cost of old tile 15 GST

BRR:8648120 Tender For Ward-59, Old City, Near Balaji Saree Centre At Sihani Gate And Near Atul Agarwal In Chandrapuri And Near Khadi Ashram And Flax Walon, Work Of Drain And Interlocking Tiles. - Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). PWD SOR 2022 17.3 2 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre leadas per direction of Engineer-in-Charge. 3 Earth work in excavation in ordinary soil 4 S/L P:C:C (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273 } 5 S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 ( a). 6 First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etcall completed as per the direction of engineer - in - charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) 7 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM ) 8 S?L of stone ballast 22.40 to 53mm size with stacking for 10 measurment etc all complete 9 Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1 10 Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1 11 Supply & laying 80 mm thick Precase cement concrete ishape interlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plan dimension 200X(160+120mm) of O.P cement smoothing gloss finish,skid resistant manufacturered from rubber moulds M-30 GRADE AS PER SOR 2022. 12 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge. 13 R.C.C work with cement ,approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors &windows excluding supply of reinforcement and its bending ,but including its fixing and binding wire including necessary cantering and shuttering etc .and supply of all materials, labour, tools& plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra etc all complete as per direction of engineer in charge.(AS PER PWD SOR 2020/283 a .) 14 Steel reinforcement for R.C.C work including straightening ,cutting ,bending,placing in position and binding all complete upto plinth level mild steel and medium tensile steel bars DSR 2023 ITEM N.5.22.1 15 Deduct of old Tiles 16 Disposal of malwa with 8km distance

BRR:8647973 Providing And Fixing Paver Block And Other Beautification Work At Santacruz Chembur Road, Tilak Nagar Chowk

BRR:8647881 Tender For Construction of a closed cement concrete drain in Annabhau Sathe Nagar, Gram Panchayat Savana, Taluka Mahagaon, District Yavatmal, Land leveling and provision of concrete paver blocks, Gram Panchayat Savana, Taluka Mahagaon, District Yavatmal

BRR:8647880 Providing Land Levelling and Concrete Pavers Blocks At G.P. Sawana Tq Mahagaon Dist Yavatmal