BRR:8445880 Supply Of Motor Point Maintenance Cardmotor Point Maintenance Card,Motor Point Maintenance Card Format-3. Detailed As Per Annexure A & B Attached. [ Warra Nty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8445782 Supply Of Corona Resistant Round Enameled Winding Wire Grade-2 19 Swg Etc.Corona Resistant Round Enameled Winding Wire Grade-2 19 Swg Etc.,Corona Resistant Round Enameled Winding Wire Grade-2 19 Swg, Conforming To Rdso Sm I No.- Rdso/2006/El/Smi/0239 (Rev.-0 Or Latest) & Conforming To Various Tests Listed Out At Point No.-6 Of The Same Smi Or Rdso Spec. No.- Rdso/2014/El/Spec/0116 (Rev.0) Issued On August 2014) Or Latest For Corona Resistant Round Copper Enameled Winding Wires. [ Warranty Period: 30 Months After The D Ate Of Delivery ] ] Electric Loco Shed Stores/Tata, Jharkhand 459.00 Kg

BRR:8445767 Supply Of Ball Point Metal Marker & Torque Marking Paste.Ball Point Metal Marker & Torque Marking Paste.,Ball Point Metal Marker (60Ml) Of Nozzle 2 Mm, Extra Nozzle Of 3, 4 Mm Colour: Y Ellow, Make :- Centurys Or Similar Supplied Items Should Have A Valid/ Balance Shelf Life Of More Than 12 Months From The Date Of Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Torque Marking Paste/Tamper Check Paste Tube (60Ml) Red In Colour, Tip Size -2.9Mm With E Xtended Nozzle With Variable Points Of 1 Mm & 2 Mm, Marking Length 5.6 To 6.6 Meters. Highly Visible Fluor Escent Colours & Excellent Adhesion As Well As Safe On Metal & All Other Surfaces. Make :- Centurys Or Simil Ar Supplied Items Should Have A Valid/ Balance Shelf Life Of More Than 12 Months From The D Ate Of Supply [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8445683 Supply Of Anti Wear Hydraulic Oil (Hlp68n Type) Vg68 Grade Extra Heavy Duty Confirming To Is-11656-1986/Reaffirmed 2002 With Aniline Point 90 Degree C , Min For All Grades In Place Of Seal Compatibility Test And Nas Value Below 8. Accepted Brands Only -(1) Servosystem Hlp - 68N Of Ioc (2) Enklo Hlp - 68 Of Hpc, (3) Shell Tellus 68 Of Bharat Shell (4) Mak Hydrol Hlp - 68 Of Bpc (5) Protomac Hlp - 68 Of Bl (6) Gulf Harmony Awt-68(R) Of Gulf Oil Corporation.Anti Wear Hydraulic Oil (Hlp68n Type) Vg68 Grade Extra Heavy Duty Confirming To Is-11656-1986/Reaffirmed 2002 With Aniline Point 90 Degree C , Min For All Grades In Place Of Seal Compatibility Test And Nas Value Below 8. Accepted Brands Only -(1) Servosystem Hlp - 68N Of Ioc (2) Enklo Hlp - 68 Of Hpc, (3) Shell Tellus 68 Of Bharat Shell (4) Mak Hydrol Hlp - 68 Of Bpc (5) Protomac Hlp - 68 Of Bl (6) Gulf Harmony Awt-68(R) Of Gulf Oil Corporation.,Anti Wear Hydraulic Oil (Hlp68n Type) Vg68 Grade Extra Heavy Duty Confirmin G To Is-11656-1986/Reaffirmed 2002 With Aniline Point 90 Degree C , Min For All Grades In Pl Ace Of Seal Compatibility Test And Nas Value Below 8. Accepted Brands Only -(1) Servosys Tem Hlp - 68N Of Ioc (2) Enklo Hlp - 68 Of Hpc, (3) Shell Tellus 68 Of Bharat Shell (4) Mak Hydrol H Lp - 68 Of Bpc (5) Protomac Hlp - 68 Of Bl (6) Gulf Harmony Awt-68(R) Of Gulf Oil Corporation. [ W Arranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sr Dmm (Dsd) Pune, Cr Maharashtra 11550.00 Litre Sr Dmm Div. Stores Bhusawal, Maharashtra 33390.00 Litre Cr

BRR:8445275 Supply Of Laboratory Reagents,Chemicals And Consumables Items Supply Of Laboratory Reagents,Chemicals And Consumables At Lakhimpur Medical College And Hospital-1 Laboratory Reagents & Consumables 1.01 Aesculin agar 1.02 Amie’s transport medium with charcoal 1.03 Antimycotic sensitivity test agar 1.04 Arginine dihydrolase broth 1.05 L-arginine (ready to use) 1.06 L- lysine (ready to use) 1.07 L- ornithine (ready to use) 1.08 BacT Alert Blood culture bottles (anaerobic,adult )-FN plus 1.09 BacT Alert Blood culture bottles (aerobic, adult)- FA plus 1.1 BacT Alert Blood culture bottles (paediatric)- PF plus 1.11 Conventional Paediatric Blood culture vial with sensor 1.12 Beef Extract powder 1.13 BHI broth 1.14 BHI supplemented with 0.05 % SPS 1.15 Bile salt agar 1.16 Blood agar base 1.17 Brilliant green lactose bile broth 1.18 Brain heart infusion agar 1.19 Brain heart infusion broth 1.2 Brewer thioglycollate medium 1.21 Bromocresol purple 1.22 Bromothymol blue, A.R 1.23 Canavanine glycine bromothymol (CGB) media 1.24 Cary Blair medium 1.25 Casein acid hydrolysate 1.26 Czapek dox broth 1.27 Cellobiose 1.28 CHROM agar for Candida 1.29 Commercial blood agar media 1.3 Cooked Meat Media 1.31 Cornmeal agar 1.32 Deoxycholate Citrate agar 1.33 Dermatophyte test medium 1.34 Dextrin 1.35 Dextrose anhydrous A.R. 1.36 D-Mannose 1.37 Dulcitol 1.38 Egg yolk agar 1.39 Eijkman Lactose broth 1.4 Fluid Thioglycolate Medium with 0.05 % SPS 1.41 Fructose 1.42 Galactose 1.43 Gelatin extra pure 1.44 Glucose 1.45 Glycogen 1.46 Growth factor for blood tellurite agar 1.47 Hippurate HP 1.48 Hugh Leifson’s media 1.49 Inositol 1.5 Inulin 1.51 L- Cystine 1.52 L- phenylalanine 1.53 Lactose 1.54 Lowenstein Jensen media slant 1.55 Lowenstein Jensen media w/o glycerol 1.56 Lysozyme 1.57 Malt Extract powder 1.58 Maltose 1.59 Mannitol 1.6 Mannitol motility test medium 1.61 Mannitol salt agar 1.62 Mannose 1.63 Asparagine broth for Pseudomonas 1.64 Bile esculin agar 1.65 Lauryl Sulfate broth 1.66 Mellibiose 1.67 Methylene blue anaerobic indicators 1.68 Modified Thayer Martin media 1.69 Monsur medium base 1.7 Mycological broth 1.71 Ninhydrin 1.72 Nitrate broth 1.73 Ox bile (bacteriological) 1.74 Oxacillin resistance screening agar base 1.75 Peptic digest broth 1.76 Phenyl alanine media 1.77 PLET agar base 1.78 Polymyxin B selective supplement 1.79 Potassium cyanate medium 1.8 Potassium tellurite 1% 1.81 Potato dextrose agar 1.82 Pyridoxal hydrochloride 1.83 Raffinose 1.84 Rhamnose 1.85 Ribose 1.86 Robinson’s media for Entamoeba 1.87 RPMI 1640 1.88 Sabouraud dextrose agar 1.89 Sabouraud’s cycloheximide chloramphenicol agar 1.9 Salicin 1.91 Selenite F broth (Twin pack) 1.92 Semisolid nutrient agar 1.93 Simmon’s Citrate agar 1.94 Sodium malonate (bacteriological) 1.95 Sorbitol 1.96 Staib’s medium (bird seed agar) 1.97 Starch 1.98 Sucrose 1.99 TCBS agar 2 Tellurite blood agar base 2.01 Tetrathionate broth 2.02 Thyoglycolate broth (ready to use) 2.03 Trehalose 2.04 Triple sugar iron media 2.05 Trypticase soy broth 2.06 Urea agar base (autoclavable) 2.07 Vitamin growth supplement 2.08 XLD medium 2.09 Xylose 2.1 Yeast carbon base 2.11 Yeast extract powder 2.12 Yeast phosphate agar 2.13 Cation adjusted Mueller Hinton agar 2.14 Cation adjusted Mueller Hinton broth 2.15 Horse serum 2.16 Urea solution 2.17 Bacillus atrophaeus ampoule (Biological indicator) 2.18 Geobacillus stearothermophilus ampoule (spores/ampoule = 10^5) (Biological indicator) 2.19 Hemoglobin powder 2.2 pH buffer (4, 7 and 9 pH) 2.21 Spore strip (Geobacillus stearothermophilus) (spores/strip= 10^5) 2.22 Tetramethyl P- phenylene diamine dihyrochloride 2.23 Anaero Gaspack 2.24 ONPG 2.25 PYR reagent 2.26 Adonitol 2.27 Andrade’s indicator 2.28 Kovac’s oxidase reagent 2.29 Kovacs oxidase reagents strips 2.3 Acid fucshin 2.31 Activated charcoal 2.32 Alcohol 95% 2.33 Alpha naphthylamine 2.34 Alpha napthol 2.35 Ammonia 2.36 Ammonium dihydrogen phosphate 2.37 Ammonium oxalate 2.38 Ammonium sulfate A.R 2.39 Amyl/Isoamyl alcohol 2.4 Barium chloride 2.41 Borax 2.42 Boric acid 2.43 Butanol 2.44 Calcium chloride 2.45 Ceder wood oil 2.46 Charcoal 2.47 Chloroform 2.48 Chromic acid/ Chromium trioxide 2.49 Cinnamaldehyde 2.5 Copper sulfate A.R 2.51 Creatinine A.R 2.52 Cresol Red 2.53 Dipotassium Hydrogen phosphate 2.54 DPX 2.55 Ether 2.56 Ferric ammonium citrate 2.57 Ferric chloride (extra pure)anhydrous 2.58 Ferric citrate monohydrate 2.59 Ferrous sulphate 2.6 Formalin 2.61 Glacial acetic acid 2.62 Glycerol 2.63 Glycerol tributyrate 2.64 Gold chloride 2.65 Hydrogen peroxide 2.66 Hypochlorite 2.67 Lead acetate 2.68 Liquid paraffin 2.69 Magnesium chloride 2.7 Magnesium sulfate heptahydrate A.R. 2.71 Mercuric chloride A.R. 2.72 Methanol 2.73 Microscope lens cleaning solution 2.74 Normal saline 2.75 Petrolium jelly 2.76 pH paper 2.77 Phenol 2.78 Phenol red 2.79 Potassium chloride 2.8 Potassium gluconate 2.81 Potassium hydroxide 2.82 Potassium iodide 2.83 Potassium dichromate A.R 2.84 Potassium dihydrogen orthophosphate, monobasic 2.85 Potassium nitrate 2.86 Rectified spirit 2.87 Resazurin sodium 2.88 Silver nitrate 2.89 Sodium azide 2.9 Sodium carbonate anhydrous 2.91 Sodium deoxycholate 2.92 Sodium glycerol phosphate 2.93 Sodium taurocholate 2.94 Sodium thioglycollate 2.95 Sodium thiosulfate anhydrous 2.96 Sulphanillic acid 2.97 Sulphuric acid 98% 2.98 Sulphuric acid 20% 2.99 Tannic acid 3 Tartaric acid 3.01 Trisodium citrate 3.02 Urea 3.03 Zinc metal powder 3.04 Thymol blue 3.05 Toludine blue 3.06 Xylene 3.07 Sodium meta bisulphate 3.08 Lysozyme 3.09 Phosphate buffer solution PH 7.4 3.1 Ninhydrin 3.11 Parafilm 3.12 P-Dimethyl amino benzaldehyde 3.13 Acetone 3.14 Amyl Alcohol 3.15 Hydrochloric acid 3.16 Tween 20 3.17 Tween 40 3.18 Tween 60 3.19 Tween 80 3.2 Absolute Alcohol 3.21 Acetic acid 3.22 Skimmed milk powder (reagent grade) 3.23 Vitek 2 Saline solution 3.24 Steam Indicator tape (for autoclave) 3.25 Basic fuschin 3.26 Brilliant green 3.27 Calcoflur white stain 3.28 Carbol fuchsin (calcified) 3.29 Crystal violet 3.3 Eosin 3.31 Evan’s blue 3.32 Field’s stain A and B 3.33 Gram’s decolouriser 3.34 Grams iodine 3.35 Hematoxylin & Eosin 3.36 Iodine AR 3.37 JSB 1 & 2 3.38 Lectophenol cotton blue 3.39 Lugol’s iodine 3.4 Malachite green 3.41 Methyl red 3.42 Methyl violet (10B practical grade) 3.43 Methylene blue Practical grade 3.44 Modified Neisser’s metachromatic stain kit 3.45 Modified Neisser’s methylene blue 3.46 Neisser’s crystal solution 3.47 Neisser’s metachromatic stain kit 3.48 Neisser’s methylene blue 3.49 Neutral red 3.5 Nigrosin 3.51 Periodic Acid Schiff stain (ready to use kit) 3.52 Safranin (practical grade) 3.53 Kinyouns stain kit 3.54 Bacillocid 3.55 Bleaching powder (Active chlorine 35%) 3.56 Sodium Hypochlorite solution 3.57 Carbolic acid 3.58 RPR (latex) 3.59 Mantoux PPD (2TU) 3.6 Mantoux PPD (5TU) 3.61 Anti HBe Rapid kit 3.62 Leptospira (IgM/IgG) Rapid kit 3.63 Gel clot for Endotoxin assay 3.64 HSV 1 & 2 IgG ELISA kit 3.65 CMV IgM ELISA kit 3.66 CMV IgG ELISA kit 3.67 Rubella IgM ELISA kit 3.68 Rubella IgG ELISA kit 3.69 Toxoplasma IgM ELISA kit 3.7 Toxoplasma IgG ELISA kit 3.71 Scrub typhus IgM ELISA kit 3.72 Leptospira IgM ELISA kit 3.73 West Nile IgM ELISA kit 3.74 VZV IgM ELISA kit 3.75 Measles IgM ELISA kit 3.76 Mumps IgM ELISA kit 3.77 Varicella IgM ELISA kit 3.78 Varicella IgG ELISA kit 3.79 HBs Ag ELISA kit 3.8 HBc Ag ELISA kit 3.81 HBeAg ELISA kit 3.82 Anti HCV ELISA kit 3.83 Anti HEV ELISA kit 3.84 Rapid kit for Clostridium difficile GDH+Toxin A+Toxin B 3.85 Latex agglutination test for Cryptococcal Ag 3.86 Latex agglutination test for bacterial meningitis 3.87 Bins for bio-medical waste disposal- (Paddle bin) Small 3.88 Bins for bio-medical waste disposal- (Paddle bin) Medium 3.89 Bins for bio-medical waste disposal- (Paddle bin) Large 3.9 White puncture proof, leak proof containers (for sharps) 5 Ltr 3.91 White puncture proof, leak proof containers (for sharps) 6.5 Ltr 3.92 White puncture proof, leak proof containers (for sharps) 3 Ltr 3.93 Puncture proof, leak proof boxes or containers with blue coloured marking 3.94 Autoclavable Needle and syringe hub cutter (with separate openings) 3 L 3.95 Autoclavable bags (8’’) 3.96 Autoclavable bags (10’’) 3.97 Autoclavable bags (14’’) 3.98 Tissue roll 3.99 Filter paper 4 Spirit lamp 4.01 Insulin syringe 4.02 Microscope Slides 4.03 Staining tray 4.04 Glass rod 4.05 Serological rack 4.06 Water dispensing bottle 4.07 Droper with tube 4.08 Micropipette tips (10-100µl) loose 4.09 Micropipette tips (100-1000µl ) loose 4.1 Micropipette tips (10-100µl) racked/in box 4.11 Micropipette tips (20-200µl) racked/in box 4.12 Micropipette tips (100-1000µl ) racked/in box 4.13 Microscope bulb 4.14 Loop holder 4.15 Nichrome Loops D1 (LA021) 4.16 Nichrome Loops D2 (LA020) 4.17 Nichrome Loops D3 (LA051) 4.18 Nichrome Loops D4 (LA019) 4.19 Nichrome straight wire (LA022) 4.2 Test tube with screw cap sterile disposable (5ml) 4.21 Test tube without cap (8 ml) 4.22 Test tube (5ml) 4.23 Test tube (10ml) 4.24 Test tube (15ml) 4.25 Test tube (50ml) 4.26 Durhams tube (25 mm-27 mm) 4.27 Test tube holder 4.28 Dispensing bottle 4.29 Staining rack 4.3 Plain forcep 4.31 Egg holder 4.32 Toothed forceps 4.33 Plain scissor 4.34 Curved scissor 4.35 Surgical tray 4.36 Micropore tape 4.37 Test tube rack 4.38 Widal rack 4.39 Latex gloves (small) 4.4 Latex gloves (medium) 4.41 Latex gloves (Large) 4.42 Cotton roll 4.43 Sodium hypochlorite 4.44 Bleaching powder 4.45 Conical flask 4.46 Syringe Membrane filter, pore size 0.2µm or 0.45µm 4.47 Glass beaker 50ml 4.48 Glass beaker 100ml 4.49 McCartney bottles 4.5 Bijou bottles 4.51 Thumb press dispensing dropper/pasteur pipette (plastic) 4.52 Antibiotic disc dispenser 4.53 Petridish 50mm (glass) 4.54 Petridish 150mm (glass) 4.55 Disposable petridish (60 mm) 4.56 Disposable petridish (90 mm) 4.57 Disposable petridish (150 mm) 4.58 Spatula (one end flat and one end spoon) 4.59 Scalpel blade, size 22 4.6 Grided Cellulose Nitrate membrane, pore size 0.45µm 4.61 Sterile vaccum driven filter (funnel capacity 150 ml, filter pore size 0.45µm) 4.62 Sterile flocked nylon nasopharyngeal swab stick 4.63 Sterile nylon nasal swab stick 4.64 Microtiter plate (round bottom) 4.65 Sterile dacron swab stick 4.66 Surgical mask 4.67 Antibiotic zone scale 4.68 Cryotag 4.69 Escherichia coli ATCC 25922 4.7 Escherichia coli ATCC BAA-3170 4.71 Klebsiella pneumoniae ATCC 700603 4.72 Klebsiella pneumoniae ATCC BAA 1705 4.73 Klebsiella pneumoniae ATCC BAA 1706 4.74 Staphylococcus aureus ATCC 25923 4.75 Staphylococcus aureus ATCC 43300 4.76 Staphylococcus epidermidis ATCC 12228 4.77 Streptococcus pneumoniae ATCC 49619 4.78 Enterococcus faecalis ATCC 29212 4.79 Enterococcus faecalis ATCC 51299 4.8 Enterococcus faecium ATCC 700221 4.81 Shigella flexneri ATCC 12022 4.82 Salmonella enterica ATCC 14028 4.83 Pseudomonas aeruginosa ATCC 27853 4.84 Candida albicans ATCC 14053 4.85 Candida albicans ATCC 10231 4.86 Candida parapsilosis ATCC 22019 4.87 Enterobacter hormaechei ATCC 700323 4.88 Enterococcus casseliflavus ATCC 700327 4.89 Stenotrophomonas maltophilia ATCC 17666 4.9 Micro pipette – 0.1µl to 10µl (variable) 4.91 Micro pipette – 10µl to 100µl (Variable) 4.92 Micro pipette – 100µl to 1000µl (Variable) 4.93 Multichannel Micro Pipette -10µl to 100µl (variable) 4.94 Multichannel Micro Pipette -200µl to 1000µl (variable) 4.95 MicroAmp™ Optical Adhesive Film 4.96 Low Multi plate-96, NATL, MLL9601 4.97 1.3 µL U-Bottom deep well plate (2 plates per bag) 4.98 Microseal B PCR Plate Sealing Film,Optical Adhesive 4.99 Diluent for DNA extraction 5 Chloroform, MB-109 5.01 Ethanol, Molecular grade 5.02 Isopropanol, Molecular grade 5.03 DM Water 5.04 Nitrile Examination Gloves, Small 5.05 Nitrile Examination Gloves, Medium 5.06 Nitrile Examination Gloves, Large 5.07 Micro-centrifuge Tubes, 1.5ml 5.08 Micro-centrifuge Tubes, 2ml 5.09 Micro-centrifuge Tubes, 3.5ml 5.1 Centrifuge tube (autoclavable) with conical bottom (15 ml) 5.11 Centrifuge tube (autoclavable) self standing with conical bottom (15 ml) 5.12 Micropipette Tips with barrier, 20-200 µL loose 5.13 Micropipette Tips with barrier, 2-20 µL loose 5.14 Micropipette Tips with barrier, 0.2-2 µL loose 5.15 Micropipette Tips with barrier, 1000 µL racked/in box 5.16 Micropipette Tips with barrier, 20-200 µL racked/in box 5.17 Micropipette Tips with barrier, 0.2-2 µL racked/in box 5.18 Aluminium Foil 5.19 Ziplock Bags 5x7 5.2 Ziplock Bags 8x10 5.21 Ziplock Bags 10x12 5.22 Cryo Tags (38x19) 5.23 Reversible Rack, 1.5 ml, 80 places 5.24 Test Tube Stand, 31 places, Tube-16 mm diameter 5.25 Polywire Rack- 16mm, 72 places 5.26 Polygrid Test tube stand, 20mm 5.27 Polygrid Test tube stand, 13mm 5.28 Polygrid Test tube stand, 16mm 5.29 DNA extraction kit (Qiagen) 5.3 RNA extraction kit (Qiagen) 5.31 Multiplex Real time PCR kit (Neuro panel) 5.32 Multiplex Real time PCR kit (Respiratory panel) 5.33 Multiplex Real time PCR kit (Gastrointestinal panel) 5.34 Multiplex Real time PCR kit for Adenovirus, Astrovirus and Sapovirus 5.35 Multiplex Real time PCR kit for Norovirus I, II and Rotavirus 5.36 Amikacin 30mcg 5.37 Amoxycillin 30mcg 5.38 Amoxyclav (Amoxycillin + Clavulanic Acid) 30mcg (20/10mcg) 5.39 Ampicillin (10mcg) 5.4 Ampicillin/Sulbactam (10/10mcg) 5.41 Azithromycin 15mcg 5.42 Aztreonam 30mcg 5.43 Bacitracin 0.04 U 5.44 Cefaclor 30mcg 5.45 Cefazolin 30mcg 5.46 Cefepime 30mcg 5.47 Cefixime 5mcg 5.48 Cefiderocol 30mcg 5.49 Cefoperazone 75mcg 5.5 Cefotaxime 30mcg 5.51 Cefoxitin 30mcg 5.52 Cefpodoxime 10mcg 5.53 Ceftazidime 30mcg 5.54 Ceftaroline 30mcg 5.55 Ceftriaxone 30mcg 5.56 Ceftriaxone/Sulbactam (30/15mcg) 5.57 Ceftazidime/avibactum (30/20 mcg) 5.58 Ceftolozane/tazobactum (30/10 mcg) 5.59 Cefuroxime 30mcg 5.6 Chloromphenicol 30mcg 5.61 Ciprofloxacin 5 mcg 5.62 Ciprofloxacin 30mcg 5.63 Clindamycin 2mcg 5.64 Clindamycin 10mcg 5.65 Co- Trimoxazole (23.75/1.25mcg) 5.66 Colistin 10mcg 5.67 Doxycycline 30mcg 5.68 Doripenem 10mcg 5.69 Erythromycin 30mcg 5.7 Etrapenem 10mcg 5.71 Feropenem 5mcg 5.72 Fosfomycin 200mcg 5.73 Gatifloxacin 5mcg 5.74 Gentamicin 10mcg 5.75 Gentamicin 120mcg 5.76 Imipenem 10mcg 5.77 Imipinem + EDTA 10/750mcg 5.78 Levofloxacin 5mcg 5.79 Lincomycin 10mcg 5.8 Lincomycin 15mcg 5.81 Linezolid 30mcg 5.82 Levonadifloxacin 10 mcg 5.83 Lomefloxacin 10mcg 5.84 Meropenem 10mcg 5.85 Meropenem/vaborbactum (20/10mcg) 5.86 Metronidazole 5mcg 5.87 Minocycline 30 mcg 5.88 Moxifloxacin 5mcg 5.89 Mupirocin 200 mcg 5.9 Nalidixic acid 30mcg 5.91 Netilmicin 30 mcg 5.92 Nitrofurantoin 300mcg 5.93 Norfloxacin 10mcg 5.94 Novobiocin 5mcg 5.95 Ofloxacin 5mcg 5.96 Optochin 5mcg 5.97 Penicillin-G 10 units 5.98 Pefloxacin 5mcg 5.99 Piperacillin/Tazobactam 100/10mcg 6 Polymixin B 50 units 6.01 Polymyxin B 300 units 6.02 Prulifloxacin 10mcg 6.03 Roxithromycin 30mcg 6.04 Sparfloxacin 5mcg 6.05 Streptomycin 10 mcg 6.06 Streptomycin 300 mcg 6.07 Teicoplanin 30 mcg 6.08 Tetracycline 30 mcg 6.09 Ticarcillin + Clavulanate (75/10 mcg) 6.1 Tigecycline 15mcg 6.11 Tobramycin 10mcg 6.12 Cefotaxime Clavulanic acid 30/10 MCG 6.13 Vancomycin 30mcg 6.14 Colistin Sulphate powder 6.15 Colistin Sulphate powder 6.16 Colistin MIC microtiter plate kit 0.25-16 mcg/ml (detachable wells) 6.17 Antibiotic sensitivity panels for GPC (P628, ST03) 6.18 Antibiotic sensitivity panels for GNB (N405) 6.19 Antibiotic sensitivity panels for GNB (N406) 6.2 Antibiotic sensitivity panels for GNB (N407) 6.21 Antibiotic sensitivity panels for GNB (N235) 6.22 Antifungal sensitivity for yeast (AST YS08) 6.23 Gram negative identification (ID GN) 6.24 Gram positive identification (ID GP) 6.25 Yeast identification (ID YST) 6.26 Unsensitized tubes for VITEK 6.27 Desicheck plus calibration standards set VITEK 6.28 ESBL detection MIC strips 6.29 AmpC detection MIC strips 6.3 MBL-ESBL-AmpC detection MIC strips 6.31 MBL detection MIC strips 6.32 KPC detection MIC strips 6.33 Salmonella Poly O 6.34 Salmonella factor O2 6.35 Salmonella factor O4 6.36 Salmonella factor O9 6.37 Salmonella H factor b 6.38 Salmonella H factor i 6.39 Salmonella H factor d 6.4 Shigella flexneri Poly B 6.41 Shigella flexneri Type II 6.42 Shigella flexneri Group (3)4 6.43 Shigella dysenteriae Poly A 6.44 Shigella dysenteriae Poly A1 6.45 Shigella boydi Poly C 6.46 Shigella boydi Poly C1 6.47 Shigella boydi Poly C2 6.48 Shigella boydi Poly C3 6.49 Shigella sonnei Poly D 6.5 Vibrio Cholerae Poly (INABA, OGAWA) 6.51 Vibrio Cholerae INABA 6.52 Vibrio Cholerae OGAWA 6.53 Vibrio Cholerae 0139 (Bengal) 6.54 E. coli O157 6.55 E. coli O pool EPEC/VTEC/STEC 6.56 Pneumococcus cell wall polysaccharide antigen, multi 6.57 Aliquot Tube (1.5 ml per tube) 6.58 Clot Vial 4 ml (Non Vaccuum) 6.59 Clot Vial 4 ml (Vaccuum) 6.6 Fluoride Vial (2 ml) Non Vaccuum 6.61 Fluoride Vial (2 ml) Vaccuum 6.62 Microtips (100 – 1000) 6.63 Vaccu needle (22 G) 6.64 EDTA K2 VIALS 2ml (non vacuum) 6.65 EDTA K2 VIALS 2ml (vacuum) 6.66 Sodium Citrate 3.2% Vial for PT (1.8 ml/2.7 ml) (non vacuum) 6.67 Sodium Citrate 3.2% Vial for PT (1.8 ml/2.7 ml) (vacuum) 6.68 Sodium Citrate 3.8% Vial for ESR (1.6 ml /1.8 ml) (non vacuum) 6.69 Sodium Citrate 3.8% Vial for ESR (1.6 ml /1.8 ml) (vacuum) 6.7 Lancet 6.71 Universal Sterile Container (30 ml) 6.72 Assayed Chemistry control Level-1 6.73 Assayed Chemistry control Level-2 6.74 BioradImmuno assay Plus control 6.75 Microtips (20-200 ul) 6.76 Microtips (100-1000 ul) 6.77 Tissue Paper roll 6.78 Micro centrifuge Tube 0.5 ml 6.79 Bar Code sticker roll 6.8 Bar Code Carbon 6.81 α - naphthol 6.82 Ethyl alcohol (Ethanol) 6.83 Crystalline copper sulphate 6.84 Sodium citrate 6.85 Sodium Carbonate(conc) 6.86 Potassium Hydroxide 6.87 Sodium Potassium tartrate 6.88 Sodium Hydroxide (Conc) 6.89 Sodium Hydroxide – dilute10% 6.9 Copper acetate 6.91 Resorcinol conc 0.05 gm 6.92 Sodium acetate 6.93 Orcinol 6.94 Ferric chloride solution 6.95 Benzidine 6.96 HNO3 (Nitric acid) conc 6.97 HNO3 (Nitric acid) dilute 6.98 D Glucose 6.99 Fructose 7 Pentose 7.01 Galactose 7.02 Starch 7.03 Dextrin 7.04 Maltose 7.05 Lactose 7.06 Sucrose 7.07 Glycogen 7.08 Iodine solution 7.09 Glycerol 7.1 Dihydroxy acetone 7.11 Erythrose 7.12 Phloroglucinol 7.13 Zinc sulphate 7.14 Ether 7.15 Benzene 7.16 Phanoptholein solution ( alcoholic) 7.17 Glycerol(20)% 7.18 Potassium hydrogen sulphate (KHSO4) 7.19 Bile salt (Na and K salt of glycocholate and taurocholate) 7.2 Borax solution (0.5% solution of sodium borate) 7.21 Cholesterol powder 7.22 Acetic anhydride 7.23 CHCl3 7.24 Biliverdin powder 7.25 Acid alcohol 7.26 Sulphur powder 7.27 1% peptone solution 7.28 0.9% Nacl 7.29 Hydrogen peroxide (conc) 7.3 Guaiac solution 7.31 Orthotoluidine solution (4%) 7.32 Hydrogen peroxide -3% solution 7.33 NaoH – 10% solution ; 40% solution 7.34 CuSO4 - 0.5% solution 7.35 Millon’s reagent 7.36 02% Lead acetate solution 7.37 Dilute Formalin 7.38 Sodium amalgam 7.39 Oxalic acid 7.4 Hopkins – Cole reagent 7.41 Sodium hypobromite solution 7.42 Amino Acid kit 7.43 Tannic acid 7.44 Picric acid 7.45 Esbach’s reagents 7.46 Citric acid 7.47 Trichloroacetic acid 7.48 Phosphotungstic acid 7.49 Barium chloride solution 7.5 Bromophenol Blue 7.51 Benzanilide 7.52 TRIS Buffer 7.53 Tungstic Acid 7.54 Crystal copper sulphate 7.55 Toluene Solution 7.56 Formaldelyde solution 7.57 Ammonium molybdate 7.58 Potassium Oxalate 7.59 Barium chloride 7.6 Barium sulphate 7.61 Alkaline sodium hypobromide 7.62 Urea Powder 7.63 Chloride Powder 7.64 Phosphate Powder 7.65 Uric acid Powder 7.66 Ammonium hydroxide 7.67 Creatinine powder 7.68 Phospho tungstic acid 7.69 Sodium Carbonate (20%) 7.7 Solid ammonium sulphate crystals 7.71 Sodium nitroprusside (solid) 7.72 Benzidine powder 7.73 Alkaline CuSO4 solution 7.74 Phosphomolybdic acid 7.75 Benzoic acid (solid/ powder) 7.76 Diazo reagent 7.77 Sulphonilic acid 7.78 Sodium nitrite 7.79 Absolute methanol 7.8 Biurate reagent 7.81 Copper sulphate fine powder 7.82 Tartrate – iodide solution 7.83 Bovine /human albumin standard 7.84 Bromo cresol green dye 7.85 Sodium tungstate (10%) 7.86 Sulphuric acid (2/3 N) 7.87 Sodium Hydroxide 0.75 N 7.88 Picric Acid 0.04 M 7.89 Creatinine 7.9 0.1 N HCL 7.91 Mixture of H2So4 and H3 Po4 (Orthophosphoric acid) 7.92 Alcohol Ether Mixture 7.93 Acetic acid anhydride and H2 So4 mixture (20:1) 7.94 Cholesterol powder 7.95 Clot activator Vial 7.96 Hydroxymethyl amine 7.97 Sodium barbitone 7.98 Sudan Black B/Fat Red 7 B / Oil red 0 7.99 Ethanol 8 Agarose 8.01 Trisodium citrate 8.02 Whatman filter paper no. 1 (Thick paper for chromatography) 8.03 Isopropanol 8.04 Pyridine 8.05 Ammonia 8.06 Ethyl acetic acid 8.07 Benzidine 8.08 Ferric Chloride 8.09 0.2% Ninhydrin 8.1 Conc. Nitric oxide 8.11 2% Lead acetate 8.12 Sodium amalgam 8.13 Sodium hypobromite 8.14 Sodium meta bisulfate 8.15 SDS-PAGE student teaching kit 8.16 Blood genomic DNA extraction kit 8.17 Radial Immunodiffusion student teaching kit 8.18 Immunoelectrophoresis student teaching kit 8.19 Phosphorous (End Point Method) 8.2 Anthrone reagent 8.21 Vit D ELISA kit 8.22 Amylase reagent(kit) 8.23 Lithium lactate 8.24 Glycine buffer 8.25 NAD 8.26 Phospholipid reagent kit. 8.27 Vitamin B12 ELISA kit 8.28 Micro- albumin (Immunoturbidity) kit 8.29 Protein by Folin method. 8.3 Uric acid reagent kit 8.31 Copper reagent kit 8.32 Tetrazolium blue indicator 8.33 Phenazine-methosulphate 8.34 Sodium lactate 8.35 Iodine monochloride (liquid) 8.36 Sodium thiosulphate 8.37 Phenolphthalein indicator 8.38 Ammonium molybdate (solid and liquid) 8.39 1,2,4 Aminonaphthosulfunic acid. 8.4 Reagent grade sodium bisulphate 8.41 Reagent grade sodium sulphite 8.42 Potassium oxalate(liquid) 8.43 Zinc 8.44 Sodium thiosulphate (liquid) 8.45 PAGE teaching kit 8.46 Test Tube (Borosilicate) 8.47 Sodium Carbonate 8.48 Ammonium Hydroxide Solution 8.49 Colorimeter Glass Cuvette (Round 3 inch) 8.5 Creatinine Kit (Alkaline picrate Method End Point ) 8.51 Urea kit (Berthelot Method End Point) 8.52 SGOT kit (Reitman & Frankel’s Method End Point) 8.53 SGPT kit (Reitman & Frankel’s Method End Point) 8.54 Triglycerides (GOD- POD Method End Point) 8.55 Cholesterol (CHOD/POD Method End Point) 8.56 Albumin Kit (BCG Method End Point ) 8.57 Protein (BIURET Method End Point ) 8.58 Calcium Kit (OCPC Method End Point ) 8.59 Phosphorus (Molybdate U.V. Method End Point ) 8.6 Dextose( Glucose Power) 8.61 Ammonium Sulphate 8.62 Con. Nitric Acid 8.63 Sodium Nitroprusside 8.64 Tube Cleaning Brush 8.65 Urine Strips (Uristix)2 Parameters 8.66 Glucose kit (GOD-POD Method End Point) 8.67 Bilirubin (Total & Direct) Modified Jendrassik & Grof Method End Point 8.68 Alkaline Phosphatase (Modified kind & Kings Method End Point) 8.69 HDL Cholesterol (Precipitation, phosphotungstic acid Method ) 8.7 D10 Dual Reorder Pack (2200201) 8.71 Lyphochek Diabetes Control 8.72 Lyphochek Hemoglobin A2 Control 8.73 D10 Micro Vial 1.5 ml (2200149) 8.74 D 10 Thermal Paper Roll (2200375) 8.75 Ammonia Solution 8.76 Acetic Acid 8.77 Ammonium Chloride 8.78 Ammonium Dihydro Orthophosphate 8.79 Ammonium Sulphate Purified 8.8 Albumin Bovine Fraction 8.81 Gentian Violet 8.82 Barium Nitrate Purified 8.83 Butan l-ol (N- Butyl Alchohol) 8.84 Phenol Red 8.85 Calcium Chloride 8.86 Chloroform (Trichloromethane) 8.87 Chromium Trioxide 8.88 Citric Acid 8.89 Cupric Nitrate Copper 8.9 Cupric Sulphate 8.91 Gentian Violet Liquid 8.92 Diecethyl Monoxide 8.93 D Potassium Hydrogen OrthoPhosphate 8.94 Eosin Methylene Blue 8.95 Ferrous Sulphate 8.96 Hexene (fraction from Pretolium 8.97 N Hexene HLPC 8.98 I Napthol 8.99 Magnesium Sulphate 9 Mangnanous Chloride 9.01 Molybdic Acid 9.02 Ceratinine Hydrochloride 9.03 Acetone LR 9.04 Egg Albumine 9.05 Furic Oxide Red 9.06 Phenol Reagent 9.07 Phenolphthalein 9.08 Potassium Hydroxide Pellets 9.09 Potassium Iodate 9.1 Potassium Sodium(+) Tangtant 9.11 Propan- ol (ISO Propplyl Alcohol 9.12 Petroleum Ether 9.13 Propanol 9.14 Phenol Crytas 9.15 Potassium Dichromate Powder 9.16 Potassium Chloride Purified 9.17 Resorcinol Extrapure 9.18 Silver Nitrte 9.19 Sodium Pluride 9.2 Sodium Hydroxide pullets Purified 9.21 Sodium Sulphate Anhydrous Pur 9.22 Sodium Chloride Extrapure 9.23 Strach Soluble(Potato) Extrapure Acb 9.24 Thymol Blue Indicator Solution 9.25 Trichloroacelic Acid 9.26 Vanillin 9.27 Silver Nitrate 9.28 Potassium Iodide 9.29 Rectified Spirit For Laboratory Use 9.3 O- Tolidine 9.31 Sulfosalicylic 9.32 Propan-2-ol 9.33 Paraffin Liquid Light 9.34 Xylene 9.35 Methanol 9.36 Dichromethane 9.37 Accetonitrate 9.38 Immersion Oil 9.39 Amino Acid 9.4 Dropper 9.41 Dropper Bulb 9.42 Wick for Spirit Lamp 9.43 Glucose Powder 9.44 Ethanol (Absolute Alcohol) 9.45 Ethanol (AR grade) 9.46 Formalin 9.47 Xylene 9.48 Acetone 9.49 Xylene 9.5 DPX 9.51 Immersion oil 9.52 Paraffin Wax 9.53 Conc. Nitric Acid 9.54 Conc. Hydrochloric Acid 9.55 Conc. Sulphuric Acid 9.56 Sodium Dihydrogen Phosphate 9.57 Disodium Hydrogen Phosphate 9.58 Glycerin 9.59 Hydrogen Peroxide 9.6 EDTA Powder 9.61 Citric Acid monohydrate 9.62 Copper (II) Sulphate 9.63 Copper (III) Sulphate 9.64 Sodium Carbonate 9.65 Sodium bicarbonate 9.66 Sodium hydrosulphite 9.67 Sodium Hydroxide 9.68 Sodium Nitroprusside 9.69 Sodium Metabisulphite 9.7 Sodium Thiosulphate 9.71 Sodium Dodecyl Sulphate (SDS) 9.72 Sulfosalicylic Acid 9.73 Ammonium Sulphate 9.74 Ammonium Chloride 9.75 Sodium Chloride 9.76 Potassium Nitrate 9.77 Potassium Acetate 9.78 Potassium Permanganate 9.79 Potassium Ferrocyanide 9.8 Potassium Ferricyanide 9.81 Potassium Dichromate 9.82 Potash Alum 9.83 Mercuric Oxide 9.84 Glucose Powder (Glucon D) 9.85 Rectified spirit 9.86 Camphor 9.87 Tris Base 9.88 Glutaraldehyde 9.89 Chromium Trioxide (Chromic Acid) 9.9 Methanamine 9.91 Silver Nitrate 9.92 Borax (Sodium Tetraborate) 9.93 Yellow Gold Chloride (Sodium chloroaurate) 9.94 Iron Alum (Ammonium Ferric Sulphate) 9.95 Egg Albumin 9.96 Leishman Stain 9.97 Leishman Stain 9.98 Leishman Powder 9.99 Giemsa Stain 10 Giemsa Powder 10.01 May Grunwald Stain 10.02 Methylene Blue 10.03 Carbol Fuchsin 10.04 May Grunwald Stain 10.05 May Grunwald Powder 10.06 Brilliant Cresyl Blue 10.07 Eosin Powder 10.08 Hematoxylin (Harris) 10.09 Hematoxylin Powder 10.1 Hematoxylin (Weigert) 10.11 Hematoxylin (Meyer) 10.12 Indian Ink Stain 10.13 Toluidin Blue 10.14 Alcian Blue stain (Ready to use Kit) 10.15 Periodic Acid Stain 10.16 Schiff reagent 10.17 EA 50 10.18 Orange G 10.19 Sudan Black B Stain 10.2 Fast Blue BB Salt 10.21 Crystalline phenol 10.22 Acridine Orange 10.23 Crystal violet 10.24 Cresyl Violet 10.25 Ethidium Bromide 10.26 Auramine O 10.27 Rhodamine B 10.28 Osmium teroxide 10.29 Malachite Green 10.3 Coomasie Blue 10.31 Light Green SF Yellowish 10.32 Rapid PAP Stain Kit 10.33 Fouchets Reagent 10.34 Ehrlich Aldehyde Reagent 10.35 Drabkin Reagent 10.36 Calcofluor White Stain 10.37 Glass Slide 10.38 Cover Slip (Size 18X18) 10.39 Cover Slip (Size 22X50) 10.4 Improved Neubauer Slide 10.41 Glass Test tube (Size 7 ml - short) 10.42 Glass Test tube (Size 12 ml - long) 10.43 Glass Test tube (Size 25 ml - long) 10.44 ESR Pipette (Glass) 10.45 ESR stand 10.46 Wintrobe Tube (Glass) 10.47 Urine Container 10.48 Urine Strip (2 parameters) 10.49 Urine Strip (10 parameters) 10.5 Heparin vial 10.51 Sterile no additive vial (For CSF collection) 10.52 Hemospot Kit 10.53 Koplin Jar (glass) 500 ml 10.54 Koplin Jar (glass) 100 ml 10.55 Koplin Jar (Plastic) 100 ml 10.56 Glass Beaker 50 ml 10.57 Glass Beaker 100 ml 10.58 Glass Beaker 250 ml 10.59 Glass Beaker 500 ml 10.6 Glass Beaker 1000 ml 10.61 Measuring Pipette (Glass) 10.62 Pasteur pippete (Glass) 10.63 Pasteur pippete (Plastic/disposable) 10.64 Rubber Teat (5ml) 10.65 Glass Stoppered bottle 10.66 Dispensing Bottle (Plastic) 10.67 Slide Staining Rack 10.68 Slide Tray (Aluminium) 10.69 Slide staining Bar with stand (Stainless steel) 10.7 Wooden Slide cabinet (1000 slides) 10.71 Wooden Slide cabinet (5000 slides) 10.72 Wooden Slide cabinet (10000 slides) 10.73 General purpose Tray (Steel) 10.74 Forceps toothed 15 cm 10.75 Forceps Serrated 15 cm 10.76 Pointed Forceps 10 cm 10.77 Forceps with Box joint 20 cm 10.78 Leuclhardt L Bar 10.79 Adhesive Plaster 10.8 Spirit Lamp stand 10.81 Wire Gauge 10.82 Test tube cleaning brush 10.83 Glass Specimen Jar + cover (Large) 10.84 Glass Specimen Jar + cover (Medium) 10.85 Glass Specimen Jar + cover (Small) 10.86 Slide Box (small size - 25 slides) 10.87 Slide Box (medium size- 50 slides) 10.88 Slide Box (Big size- 100 slides) 10.89 Grossing Kit 10.9 Tube rack (plastic) 10.91 Conical Flask (Glass- 200 ml) Erlenmeyer 10.92 Conical Flask (Glass- 500 ml) Erlenmeyer 10.93 Conical Flask (Glass- 1000 ml) Erlenmeyer 10.94 Measuring Cylinder (Glass 100 ml) 10.95 Measuring Cylinder (Glass 200 ml) 10.96 Measuring Cylinder (Glass 500 ml) 10.97 Measuring Cylinder (Glass 1000 ml) 10.98 volumetric Flask (Glass 20 ml) 10.99 volumetric Flask (Glass 50 ml) 11 volumetric Flask (Glass 100 ml) 11.01 volumetric Flask (Glass 200 ml) 11.02 volumetric Flask (Glass 500 ml) 11.03 volumetric Flask (Glass 1000 ml) 11.04 Stop /dropping Bottle (Plastic 100 ml) 11.05 Stop /dropping Bottle (Glass 100 ml) 11.06 Wash Bottle 11.07 Glass Storage Bottle (100 ml)transperant 11.08 Glass Storage Bottle (250 ml)transperant 11.09 Glass Storage Bottle (500 ml)transperant 11.1 Glass Storage Bottle (1000 ml)transperant 11.11 Glass Storage Bottle (100 ml) dark/amber 11.12 Glass Storage Bottle (250 ml) dark/amber 11.13 Glass Storage Bottle (500 ml) dark/amber 11.14 Glass Bottle (250 ml)transperant penny head stopper 11.15 Glass Bottle (500 ml)transperant penny head stopper 11.16 Glass Bottle (250 ml) amber penny head stopper 11.17 Glass Bottle (500 ml) amber penny head stopper 11.18 Weighing Bottle 250 ml 11.19 Weighing Bottle 500 ml 11.2 Weighing Bottle 1000 ml 11.21 Glass Funnel 11.22 Plastic Funnel 11.23 Petridish (disposable) 11.24 Micropipette (fixed 10µ) 11.25 Micropipette (fixed 20µ) 11.26 Micropipette (fixed 200µ) 11.27 Micropipette (fixed 50µ) 11.28 Micro pipette – 20µl to 200µl 11.29 Multichannel Micro Pipette -5µl to 50µl (Variable) 11.3 Micro pipette – 0.1µl to 10µl (variable) 11.31 Multichannel Micro Pipette -20µl to 200µl (variable) 11.32 Multichannel Micro Pipette -25µl to 300µl (variable) 11.33 Multichannel Micro Pipette -200µl to 1000µl (variable) 11.34 Micro pipette – 100µl to 1000µl 11.35 Micro pipette – 10µl to 100µl 11.36 Micropipette (fixed 100µ) 11.37 Micropipette (fixed 1000µ) 11.38 Micropipette (variable 20µ - 200µ) 11.39 Micropipette (variable 50µ - 500µ) 11.4 Micropipette (variable 5µ - 50µ) 11.41 Bone Marrow Biopsy Needle (11 G) 11.42 Bone Marrow Biopsy Needle (13 G) 11.43 Bone Marrow Aspiration Needle (16 G) 11.44 Bone Marrow Aspiration Needle (18 G) 11.45 Disposable Biopsy mould 11.46 Hot Plate (for Biopsy) 11.47 Slide warming table 11.48 Slide holding tray 11.49 Esbach albuminometer 11.5 Urinometer 11.51 Ocular grid 11.52 Slide Staining Rack (20 slides) 11.53 Slide Staining Jar 11.54 Disposable Core Biopsy Gun 11.55 Leica tissue freezing medium 11.56 Leica microtome blade 11.57 Hemocytometer Box 11.58 Sahlis hemoglobinometer box 11.59 Dessicator 11.6 Silica Gel 11.61 Stop Watch 11.62 Spatula 11.63 Watch Glass 11.64 Patri Dish Glass (90mm) 11.65 Ayer Spatula (disposable) 11.66 Mercury-in-glass thermometer (0 - 100 C) 11.67 Medical Thermometer (mercury) 11.68 Burette (50 ml) 11.69 Burette stand 11.7 Glass dropper 11.71 Gigli bone saw 11.72 Lab eye protection glass 11.73 Magnifying glass with handle 11.74 Digital room thermometer 11.75 Acrylic Specimen Jar + cover (Large) 11.76 Acrylic Specimen Jar + cover (Medium) 11.77 Acrylic Specimen Jar + cover (Small) 11.78 Erba Protime LS 11.79 Erba Protime LS 11.8 Erba Actime 11.81 Erba Actime 11.82 Erba Calcium Chloride 11.83 Erba Thrombin Reagent 11.84 Erba Thrombin Reagent 11.85 Erba Thrombin Time 11.86 Erba Factor II Deficient Plasma 11.87 Erba Factor V Deficient Plasma 11.88 Erba Factor VII Deficient 11.89 Erba Factor X Deficient Plasma 11.9 Erba Factor VIII Deficient Plasma 11.91 Erba Factor IX Deficient Plasma 11.92 Erba Factor XI Deficient Plasma 11.93 Erba Factor XII Deficient Plasma 11.94 Erba Chrom Protein C 11.95 Erba Protein S Clotting 11.96 Erba Chrom Antithrombin III 11.97 Erba LA1 Screen 11.98 Erba LA2 Confirm 11.99 Erba DDimer R 12 Erba Standard Plasma 12.01 Erba DDimer Calibrator 12.02 Erba Control N 12.03 Erba Control P 12.04 Erba Control N Plus 12.05 Erba Control P Plus 12.06 Erba DDimer Control N + P 12.07 Erba LA Control High 12.08 Erba Owrens Veronal Buffer 12.09 Erba Single Reaction Cuvettes SRC10 12.1 Thermal Printer Paper Rolls 3 X 57 MM X 15M) 12.11 Clean solution 12.12 Erba Clean I 12.13 ESR RFID transponder (ERBA Cube 30 touch) 5000 tests 12.14 ESR Control Tube (ERBA Cube 30 touch) 12.15 HPLC kit- Biorad D10 12.16 Paper - Biorad D10 12.17 Aliquot tube (0.5ml) 12.18 Deionized water 12.19 PT Reagent (Thrombo 1.0) 12.2 PT Cuvette 12.21 RBC diluting fluid 12.22 WBC Diluting fluid 12.23 Platelet diluting fluid 12.24 Semen Diluting Fluid 12.25 Sorensen Buffer 12.26 Weiss Buffer 12.27 Tris Buffer 12.28 TAE buffer 12.29 TBE Buffer 12.3 Benzene Reagent 12.31 Anti A Reagent 12.32 Anti B Reagent 12.33 Anti Rh Reagent 12.34 Anti AB Reagent 12.35 Anti D (IgG)Reagent 12.36 Anti D (IgM)Reagent 12.37 AntiHuman Globulin 12.38 Anti H reagent 12.39 Anti A1 reagent 12.4 CSF Diluting Fluid 12.41 Reticulocyte Stain 12.42 WBC Pipette 12.43 RBC Pipette 12.44 Westergren Tube 12.45 Microtip Box 12.46 Blood Roller Mixer 12.47 Centrifuge Glass Test Tube 12.48 Isopropyl Alcohol 12.49 ABX Cleaner (HORIBA Pentra XLR) 12.5 ABX Eosinofix (HORIBA Pentra XLR) 12.51 ABX Basolyse II (HORIBA Pentra XLR) 12.52 ABX Diluent (HORIBA Pentra XLR) 12.53 ABX Lysebio (HORIBA Pentra XLR) 12.54 Minoclear (HORIBA Pentra XLR) 12.55 ABX Difftrol(control) (HORIBA Pentra XLR) 12.56 Adjustable Microtip (for PT-INR) 12.57 Micro cups (for PT-INR) 12.58 HIV ELISA (4th generation) 12.59 HBV ELISA (4th generation) 12.6 HCV ELISA (4th generation) 12.61 HIV rapid kit (tridot) 12.62 Single blood bag (350 ml) 12.63 Double blood bag (350 ml) 12.64 Double blood bag (450 ml) 12.65 Triple blood bag (350 ml) 12.66 Triple blood bag (450 ml) 12.67 Quadruple blood bag 12.68 Haemoglobin kit (Hemocue HB 301) 12.69 Hemocue HB 301 analyser 12.7 Hemocue HB 301 cuvette 12.71 5% Hypo chloride solution 12.72 Copper sulphate 12.73 Cotton roll 12.74 Rubber gloves 12.75 Gauge cotton 12.76 Glass test tube 5ml 12.77 Micro tips (2-200 ul) 12.78 Micro tips (100-1000 ul) 12.79 Bovine serum albumin 12.8 Blood transfusion set 12.81 ELISA paper roll 57x25mm 12.82 Povidone Iodine solution 12.83 Squeeze ball (smiley ball) 12.84 glucose tube 12.85 Alcohol swab 12.86 Paper plaster 12.87 Oxygen mask 12.88 Disposable syringe 2ml 12.89 Disposable syringe 5 ml 12.9 Disposable syringe 10ml 12.91 Circular temperature record chart 12.92 BP machine (manual) 12.93 BP machine digital 12.94 Pulse oximeter (finger tip) 12.95 Thermometer (for body temperature) 12.96 Digital thermometer for refrigerator 12.97 Weight machine 12.98 Digital mass balance 12.99 Thermoscanner 13 Kidney tray 8 13.01 Kidney tray 10 13.02 Kidney tray 14 13.03 Medicine tray (large) 13.04 Micropipette (1-50)µl 13.05 Micropipette (10-100)µl 13.06 Micropipette (100-1000)µl 13.07 Multichannel micropippete (5-50)µl 13.08 Multichannel micropippete (10-100)µl 13.09 Multichannel micropippete (30-300)µl 13.1 Microtips stand 13.11 Breath analyzer 13.12 Acti-diff solution for MS4S/MS4SE 13.13 MS4SE card/MS4S2 13.14 Isoflux 13.15 Transflux 13.16 MS cleaning solution 13.17 Clot filter 13.18 WBC Diluting fluid (Turk’s Solution) 13.19 RBC Diluting fluid (Hayem’s fluid) 13.2 Leishman Stain (Twin pack) Part B 13.21 Lancet (Twist type) 13.22 Bentonite Paste 13.23 EEG Electrodes 13.24 Wintrobe tube 13.25 Heamometer pipette 13.26 Dropper (Small) 13.27 Distilled water 13.28 Saffranine 13.29 Methylene blue 13.3 Carbol fuchsin acid 13.31 Haematoxylene 13.32 Eosin 13.33 DPX mount 13.34 Sodium fluoride 13.35 Thymol 13.36 Disinfectant( phenyl/lysol) 13.37 Water Quality Testing kit 13.38 H2S Test Kit 13.39 Orthotoludine Test Kit 13.4 Desiccators 13.41 Nessler’s cylinder 13.42 Burrettes with stands 13.43 Rubber cork 13.44 Porcelain Dish 13.45 Swab stick 13.46 Platinum wire with handle 13.47 Rubber pipe 13.48 Pipette: with rubber teat 13.49 Durham’s tube 13.5 Bunsen burner 13.51 Ammonium acetate 13.52 Ammonium chloride 13.53 Sodium sulphate 13.54 Erichrome black 13.55 Calcium carobonate 13.56 Hydrocylamine hydrochloride 13.57 Peptone powder 13.58 Methylene red 13.59 Ammonium ferric sulphate 13.6 Potassium permanganate 13.61 Methyl alcohol 13.62 Sulphanilic acid 13.63 Naphthylamine 13.64 Potassium nitrite 13.65 Phenanthroline solution 13.66 Calcium carbonate 13.67 Diethyl ether solution 13.68 Petroleum ether 13.69 Dextrose (D glucose) 13.7 Potassium Dihydrogen Phosphate (KH2PO4) 13.71 Magnesium Sulfate (MgSO4:7H2O) 13.72 Trisodium Citrate (Na3C6H5O7) 13.73 Potassium Mercuric Iodide (HgI4K2) 13.74 Ferric Chloride (FeCl3) 13.75 Lead acetate Trihydrate {Pb(C2H3O2)2} 13.76 Fehling’s reagent A 13.77 Fehling’s reagent B 13.78 Benedict’s Reagent 13.79 Copper Sulfate (CuSO4) 13.8 Potassium Iodide (KI) 13.81 Iodine (I2) 13.82 2% Lignocaine 13.83 Ether Diethyl 13.84 Atropine sulfate 13.85 1% Pilocarpine 13.86 Morphine sulfate 13.87 Pentamethylenetetrazole (PTZ) 13.88 Carrageenan 13.89 Niacinamide 13.9 Streptozotocin 13.91 Alloxan monohydrate 13.92 Histamine di hydrochloride 13.93 Acetylcholine bromide 13.94 Shellac 13.95 BMW bin bags (big size) 13.96 Surgical sterile hand gloves (size 7) 13.97 Surgical sterile hand gloves (size 6.5) 13.98 Surgical sterile hand gloves (size 7.5) 13.99 Acetone 14 Acetylcholine bromide 14.01 Sodium Dihydrogen Phosphate (Na2PO4) 14.02 Chymogram graph paper

BRR:8445140 Repair Restoration On Link Road To Village Kharoh Km 000 To 3000 Sh Construction Of Retaining Wall At Rd 0260 To 0274 Point 50 1600 To 1610Point 50 And Ushape Drain At Rd 1550 To 1670 Dc Deposit

BRR:8444551 Supply of All Lab Equipment Supply, Installation And Commissioning Of All (Botany, Chemistry, Physics, Geology, Zoology And Geography) Lab Equipments On Turn Key Basis At Item Wise For Govt. Model College, Jhabua - 457661 (Nmdc). , Chemistry Lab Equipment , Analytical/ Chemical Weight Box , Chemical Balance , Chromatography Cabinet , Digital Conductivity Meter , Digital Potentiometer , Distillation Apparatus , Electronic Balance , Kipp?S Apparatus ? Plastic , Magnetic Stirrer With Hot Plate , Melting Point Apparatus ? Electrical , Vortex Shaker , Water & Soil Analysis Kit ? 8 Parameters , Water Bath - 06 Holes , Thin Layer Chromatography (Tlc) Kit , Uv-Visible Spectrophotometer , Digital Ph Meter ? Table Model , Rubber Corks No.1,2,3,4,5,6,7, 8,9,10,11 , Ashless White Filter Paper (125Mm) Circles , Desecators, With Cover And Procelain Plate, Plastic Knob_(Borosil_100 Mm) , Low Form Silica Crucible Without Lid_(Infusil_25 Ml) , Crucible, Gooch Type, Low Form, With Sintered Dise, G3_(Borosil_50 Ml) , Crucible, Gooch Type, Low Form, With Sintered Dise, G4_(Borosil_50 Ml) , Bottle Key For Opening And Closing Bottles With S 40 And S 28 Screw Caps_(5 Units) , Volumetric Flasks , Volumetric, With Interchangeable Solid Glass Stopper Accuracy As Per Class B_(Borosil_50 Ml) , Volumetric Flasks , Volumetric, With Interchangeable Solid Glass Stopper Accuracy As Per Class B_(Borosil_100 Ml) , Volumetric Flasks , Volumetric, With Interchangeable Solid Glass Stopper Accuracy As Per Class B_(Borosil_250 Ml) , Flasks, Erlenmeyer, Conical, Narrow Mouth_(Borosil_500 Ml) , Flasks, Erlenmeyer, Conical, Narrow Mouth_(Borosil_100 Ml) , Flasks, Erlenmeyer, Conical, Narrow Mouth_(Borosil_250 Ml) , Beakers, Low Form Beakers With Spout_(Borosil_50 Ml) , Beakers, Low Form Beakers With Spout_(Borosil_100 Ml) , Beakers, Low Form Beakers With Spout_(Borosil_250 Ml) , Beakers, Low Form Beakers With Spout_(Borosil_400 Ml) , Beakers, Low Form Beakers With Spout_(Borosil_500 Ml) , Burettes Boroflo , Fitted Withboroflo Gp (General Purpose), Screw Thread With Ptfe Keys, Accuracy As Per Class B_(Borosil_50 Ml) , Pipettes , Trnsfer Volumetric , Class B_(Borosil_10 Ml) , Pipettes , Trnsfer Volumetric , Class B_(Borosil_25 Ml) , Watch Glassess - Line_(Borosil_10 Ml) , Glass Rod 8_(General_Each) , S.S. Spatula 6_(General_Each) , Ss Tong - 12_(General_Each) , Wash Bottles , Set With Interchangeable Stopper_(Borosil_500 Ml) , Funnels Plain, 600 Angle, Short Stem_(Borosil_100 Ml) , Porcelain Dish 4_(General_Each) , Buckner Funnel 3 -75 Mm_(General_Each) , Tubes, Centrifuge, Conical Botton, Graduated, With Stopper_(Borosil_15 Ml) , Cylinders Graduated, Single Metric Scale, With Pour Out, Withhexagonal Base, Class B_(Borosil_10 Ml) , Cylinders Graduated, Single Metric Scale, With Pour Out, Withhexagonal Base, Class B_(Borosil_25 Ml) , Cylinders Graduated, Single Metric Scale, With Pour Out, Withhexagonal Base, Class B_(Borosil_100 Ml) , Flasks, Boiling, Roundbottom, Short Neck, Withinterchangeable Joint_(Borosil_1000 Ml) , Flasks, Boiling, Roundbottom, Short Neck, Withinterchangeable Joint_(Borosil_100 Ml) , Flasks, Boiling, Roundbottom, Short Neck, Withinterchangeable Joint_(Borosil_500 Ml) , Funnels Separating, Pear Shape, With Glass Stopcock And Interchangeable Stopper_(Borosil_125 Ml) , Funnels Separating, Pear Shape, With Glass Stopcock And Interchangeable Stopper_(Borosil_250 Ml) , Funnels Plain, 60° Angle, Short Stem_(Borosil_25 Ml) , Funnel (Plasic) , Tubes, Test, With Rim_(Borosil_70 Ml) , Relative Density Bottles With Capillary Bore Interchangeable Teflon Stopper_(Borosil_10 Ml) , Condensers , Liebig, With Sealed Inner Tube_(Borosil_200 Mm) , Reagent Bottles Graduated With Screw Cap And Pouring Ring_(Borosil_250 Ml) , Chromatography Jar (Rectangular Glass Jar) , Burete Stand With Road, Clamp And Boss Head , Capillary Tube , China Dish , Chromatography Paper , Filter Paper , Ignition Tube , Glass Bod Bottle (250Ml) , Sprit Lamp (Made Of Alluminium) , Stelegmometer (Borosilicate Glass) , Viscometer (Borosilicate Glass) , Test Tube Holder (Multicolour Wooden And Iron) , Test Tube Stand (Plastic, 6*6*7Cm) , Test Tube Cleaner Brush , Copper Water Bath With Bakelite Handle Heatting Countenor And Concentric Ring , Metal Tripode Stand (10*10*12) , Geography Lab Equipment , Latest Indian State Maps Of India (Laminated) Certified By S.O.I.Size 70X100cms. , State Maps Of Physical Series. , Map On Worlds & Continents Size 100X140cms. (Laminated). , Geographical Wall Maps :English / Hindi Size 70 X 100 Cms. (Laminated). , 1). 1Physical Feature , 2). Political , 3). Natural Vegetation , 4). Natural Region , 5). Agriculture , 6). Rock & Minerals , 7). Irrigation & Power Projects , 8). Industries , 9). Soils , 10). Railways , 11). Roads , 3- D Map Of India Political. , 3- D Map Of Worldpolitical / Physical , India Political Cum Road Guide Map Size 145X100cms. , India Physical Mapsize 145X100cms. , 3 D State Map Of M.P. , Maps Of India-World & Continents Giant Size , Weather Map Of India (Set Of 14 Maps) , Daily Weather Report Set Of 12 (Photocopy). , Topographical Sheet , Political Globes 40Cm Dia. , Measuring Chain , Measuring Tape : Size 30Meter Made Of Fibre Glass (Freemans Make) , Ranging Rod: , Abney Level: , Thermometers: , Min. & Max. Bulb Thermometer C&F Combined: Zeal Uk Made. , Dry & Wet Bulb Thermometer C&F Combined: Zeal Uk Made. , Wall Thermometer (Imported): , Box Sextant : , Clinometer Tangentindianpattern : Made Of Full Brass (Survey Of India Pattern) , Aerial Photographs , Aerial Photographs Coloured. , Portable Weather/Meteorological Station (Imported) : , Self Recording Rain Gauge: , Wind Vane: , Robinson’S Cup Anemometer : , Latest Tracing Table For Geography Lab Size 36”*48” , Oxford Student Atlas For India , Oxford Student Atlas (Hindi) For Competitive Exams: Bharat Sanskaran , National Geographic Atlas Of The World, 11Th Edition , India Road Atlas: India Tourist Map Hindi , Geology Lab Equipment , Polarising (Petrological Microscope: (Export- Quality) , Ore Minerals And Rocks Samples , Hand Lens 10X , Geological Map Of India , 3 D Geological Map Of India , Tectonic Map Of India , Geotechnical Map Of India , Geomorphological Map Of India , Tectonic Map Of India & Adjoining Countries , India Rock & Mineral Map , India Rock Type Map , India Ocean Geology Map , India Soil Texture Map , India Earthquake Map , India Soil Cover Map , India Physiography , India Relative Relief Map , India Slope Map , India River Basin Map , India Drainage Map , India Soil Map , India Land Use Map , India Coastal Features Map , India Water Pollution Map , India Air Pollution Map , Model Showing Dip. Strike & Escarpment In Inclined Strata , Model Showing True & Apparent Dip In Inclined Strata , Model Showing Strike & Dip In Inclined Strata , Model Showing Strike & Pitch (Plunge) In Folded Strata , Symmetrical Anticline/ Syncline , Asymmetrical Anticline/ Syncline , Pitching Anticline/ Syncline , Monoclinal Fold , Isoclinals Anticline/ Syncline , Recumbent Fold , Fan Fold , Dome Fold , Strike Faults In Inclined Beds , Dip Faults In Inclined Strata , Faults Across A Syncline Or Anticline , Faults Across A Pitching Anticline Or Syncline , Dipfaults In Folded Strata Across A Syncline Or Anticline , Dipfaults In Folded Strata Across A Pinching Syncline Or Anticline , Rockscycle Model , Ocean Feature Model , Hydrological Cycle Model , Earth History Models , Land Form Model , Comparative Terrain Modrel , Models Of Volcanoes , Models Of Volcanoes , Model Of Contour Map Interpretation , Model Of Plate Structure & Surface Morphology , Models Of Fold Structure & Its Geomorphic Evolution , Model Of Crustal Movement , Model Of Island Formation , Model Of Bottom Configuration , Model Of Depositional Formation , Fold Structure & Its Geomorphic Evolution Models , Model Of Change On Earth’S Crust , Geological Hammer , Haversacks , Toposheets : Published By Survey Of India Scale 1;50000. , Thin Section Slides Of Rocks & Minerals , Rocks Set , Rocks (15 Igneous+15 Sedimentary+15 Metamorphic Rocks) , Rocks (Igneous) Set Of 15. , Rocks (Sedimentary) Set Of 15. , Rocks (Metamorphic) Set Of 15. , Rocks Forming Minerals Set Of 10. , Physics Lab Equipment , Battery Charger 2 V To 12 V , Ballistic Galvanometer (100 Ohms) With Lamp & Scale Arrangement , Crown Glass Prism , Spectrometer 6 , Moment Of Inertia Table , Complete Apparatus To Verify Law Of Parallel & Parpendicular Axis For Moment Of Inertia , Study Of Compound Pendulum , Reading Telescope , Study Of Bending Of A Beam , Young’S Modulus Using Cantilever , Surface Tension By Jaeger’S Method , Viscosity By Poiseuile’S Method , Measurement Of Low Resistance By Carry Foster Bridge , Potentiometer , Newton’S Law Of Cooling Apparatus , Sodium Vapor Lamp 35 Watt , Transformer For Sodium Lamp , Mercury Lamp , Transformer For Mercry Lamp , Fresnel’S Biprism , Bi-Prism Assembly Without Optical Bench , Half-Shade Polarimeter , Electroscope – Gold Leaf , Af Generator 200 Khz , Vibration Magnetometer , Tangent Galvanometer , E/M By Thompsons Method , Study Of Absorption Spectra Of Iodine Vapor – Complete Setup , Hysteresis (B-H) Curve Of Ferromagnetic Material With The Help Of Cro , Study Of A Voltage Regulation System (Half Wave, Full Wave & Bridge Rectifier) , Transistor Characteristics , Tunnel Diode Characteristics , Specific Resistance Energy Gap Of A Semiconductor , Regulated Power Supply Using Transistor , Study Of Two Stage Rc Coupled Amplifiers , Diode & Zener Diode Characteristics Apparatus , Charging & Discharging Of Condenser , To Find The Wavelength Of Sodium Light With The Help Of Fresnel’S Bi-Prism , Study Of Lissasjous Figure , Barton Apperatus , Adjustable Height Stand , Capillary Tube Packet Of Different Radius , Platinum Resistance Thermometer , Desoldering Tool , Thermocouple Apperatus , Jeft Aapperatus To Study Cherecterstic Curve , Plane Transmition Gating , Holografic Differention Gating , Physical Balance , Weight Box , Vernier Calipers , Screw Gauge - 20 X 1 Mm , Stop Clock – L.C. 1 Sec , Digital Stop Watch , Resistance Box , Ammeter Dc , Ammeter Ac , Voltmeter Dc , Voltmeter Ac , Analogmultimeter , Digitalmultimeter , Soldering Iron , Travelling Microscope , Diode Lazor , Holographic Differection Gating , Logic Gate Apperatus Standard Tool Box , Connecting Lead Wire For Multimeter , Fly Wheel , Mirror Strip With Holder , Digital Thermameterstandard , Mercury Thermameter Standard , Digital Voltmeter , Digital Amoeremeter , Digital Multimeter With Cords , Aluminium Tray 6 Inch * 1 Ft , Uv Lamp 30 Watts , Zoology Lab Equipment , Volvox , Grasshopper Testis Fixed For Meiosis , Ascaris (Male And Female) , Taenia Solium (Tap Worm) , Nereis And Heteronereis , Leech (Hirudinaria) , Earthworm , Squilla , Termite Queen , Stick Insect , Praying Mantis , Unio , Pila , Loligo , Balanoglossus , Herdmania , Honey Bee Life Cycle , Lac Insect Life Cycle , Silk Moth Life Cycle , Myxine Glutinosa-Excellent Specimen , Petromyzon (Lampray) , Salpa , Zygaena (Hammer Headd) , Torpedo (Electric Ray) , Exocoetes (Flying Fish) , Echineis (Sucker Fish) , Frog , Rhacophorus , Hyla , Salamender , Uromastix , Draco , Chamaeleon , Viper Russeli , Naja , Python , Hydrophis , Bat , Fossil Specimens: Fossil Cast Of Archeopteryx Lithographica From U.K. (Cast From Original) Full Size , Amoeba W.M , Earthworm- Septal Nephridia , Mouth Parts - Anapheles Male , Mouth Parts - Anapheles Female , Chick Embryology - 13 Hrs Stage (W.M.) , Chick Embryology - 16 Hrs Stage (W.M.) , Chick Embryology - 24 Hrs Stage (W.M.) , Chick Embryology - 33 Hrs Stage (W.M.) , Chick Embryology -72 Hrs. Stage (W.M.) , Chick Embryology -96 Hrs. Stage (W.M.) , Balanoglossus - T.S. Through Pharyngeal Or Branchio-Genital Region Of Body , Balanoglossus - T.S. Collar Region , Amphioxus - T.S. Passing Through Oral Hood , Amphibia - Blastula V.S./W.M. , Amphibia - Gastrula V.S./W.M , Rhomboid Scale W.M , Lampbrush Chromosome , Mitosis Cell Division: Prophase , Mitosis Cell Division: Metaphase , Mitosis Cell Division: Anaphase , Mitosis Cell Division: Telophase , Meosis Cell Division: Leptotene Stage , Meosis Cell Division: Zygotene Stage , Meosis Cell Division: Diplotene Stage , Meosis Cell Division: Pachytene Stage , Meosis Cell Division:Diakinesis Stage , Meosis Cell Division: Metaphase I , Meosis Cell Division: Anaphase-Telophase I , Meosis Cell Division: Metaphase Ii , Meosis Cell Division: Second Anaphase Telophase , Rabbit (Mammals) - Pitutary Gland (T.S.) , Rabbit (Mammals) - Adrenal Gland (T.S.) , Rabbit (Mammals) - Kidney (L.S.) , Striated Muscles , Non-Striated Muscles , Cardiac Muscles , Planaria W.M , Waucheria Brancofti (Filaria) Smear , Trichinella Spiralis Cyst In Muscle , Tape Worm Scolex W.M. , Uv-Visible Spectrophotometer , Rocking Microtome , L Mould For Casting Paraffin Block , L Mould For Casting Paraffin Block , Chromatography Cabinet , Paper Chromatography Kit , Haemocytometer Kit , Haemoglobinometer (Sahlis) Kit , Bp Apparatus , Stethoscope Standard , Micropipette Fully Autoclavable Volume 0.02 - 2 Ul , Micropipette Fully Autoclavable Volume 0.5 - 10 Ul , Micropipette Fully Autoclavable Volume 20 - 200 Ul , Micropipette Fully Autoclavable Volume 100 - 1000 Ul , Whatmann Filter Paper No. 1 , Secchi Disc , Gel Electrophoresis Kit (Vertical) , Electrophoresis Apparatus (Paper Model) , Insect Collecting Net Portable , Entomological Pins , Insect Killing Jar , Insect Spreading Board (Adjustable) , Pointer Eye Piece Imported 5X , Pointer Eye Piece Imported 10X , Pointer Eye Piece Imported 15X , Dissection Of Dog Fish (Scoliodon) , Prawn Dissection , Comparative Model Set Of Vertebrates Hearts -Set Of 5 , Evolution Of Man - Set Of 4 Models , Life History Of Frog , Earthworm Dissection , Earthworm Cierculatory System , Frog Dissection , Dna Model Set Of 4 On Board , Human Endocrine Glands , L.S. Of Kidney Of Human On Board , Articulated Skeleton Of Fowl In Showcase , Articulated Skeleton Of Shark (Dog Fish) In Showcase , Pectoral Girdle - Frog , Pectoral Girdle - Lizard , Pectoral Girdle - Pigeon , Pectoral Girdle - Lepus , Pelvic Girdle - Frog , Pelvic Girdle - Lizard , Pelvic Girdle - Pigeon , Pelvic Girdle - Lepus , Limb Bone - Fore Limb -Frog , Limb Bone - Fore Limb -Lizard , Limb Bone - Fore Limb -Pigeon , Limb Bone - Fore Limb -Lepus , Limb Bone - Hind Limb -Frog , Limb Bone - Hind Limb -Lizard , Limb Bone - Hind Limb -Pigeon , Limb Bone - Hind Limb -Lepus , Botany Lab Equipment , Nested Square , Circular Quadrats , Herbarium Press , Herbarium Paper Sheet , Drawing Board , Field Collection , Prismatic Binocular , Plastic Collection Bottles 60Ml , Plastic Collection Bottles 125Ml , Plastic Collection Bottles 250Ml , Mycoplasma , Nostoc Wm , Oscillatoria Wm , Polytrichum Ls , T.S. Of Aerial Shoot , T.S. Of Young Stem , T.S Of Old Stem , T.S.Of Microsporophyll , L.S Of Ovule , L.S Of Male Cone , Pollen Grains , L.S Of Female Cone , L.S Of Ovule , L.S Of An Ovule , L.S Of Mature Seed , Longitudinal Section Of Root Apex , Tyloses , Longitudinal Section Of Shoot Apex , Transverse Section , Growth Rings,Heartwood , Lenticel , Longitudinal Section Of Ovule , L.S Of Ovule Showing , Transverse Section Of Mature , V.S Of Leaf , T.S Ofstem , Free Central , Superficial Placentation , Ceratophyllum T.S Of Stem , Ceratophyllum V.S Of Leaf , Trapa V.S Of Leaf , Eichhornia V.S Of Leaf , Marginal Placentation , Amophilla V.S Of Leaf , Axile Placentation , Volvox Vegetative , Oedogonium Vegetative , Oedogonium Macrandrous , Oedogonium Nannandrous , Chara Vegetative , Chara Reproductive , Vaucheria Vegetative , Vaucheria Reproductive , Ectocarpus Vegetative , Ectocarpus Reproductive , Polysiphonia Vegetative , Polysiphonia Reproductive , Albugo Sexual , Albugo Hypertrophy , Mucor Sporangial , Mucor Zygosporic , Yeast Budding , Peziza , Puccinia Uredo , Puccinia Teleuto , Puccinia Aecidial , Puccinia Pycnidial , Alterneria , Lichen , Riccia Vegetative , Riccia Antheridia , Riccia Archegonia , Riccia Sporophyte , Marchantia Thallus , Marchantia With Gemma , Marchantia Antheridial , Marchantia Archeogonial Plant , Anthoceros Vegetative , Anthoceros Antheridia , Anthoceros Archegonia , Anthoceros Sporophyte , Polytrichum Vegetative Plant , Polytrichum Antheridia , Polytrichum Archegonium , Polytrichum Rhizome , Funaria Vegetative , Funaria Anthridia , Funaria Archegonium , Pteris Vegetative , Pteris Anatomy , Psilotum Anatomy , Psilotum Anthridia , Psilotum Archegonium , Lycopodium Stem , Lycopodium Stem , Lycopodium Root , Lycopodium Cone , Selaginella Vegetative , Selaginella Stem , Selaginella Rhizophore , Selaginella Strobillus , Equisetum Stem , Equisetum Cone , Equisetum Rhizome , Marsilea Petiole , Marsilea Sporocarp , Marsilea Rhizome , Cycas Ordinary Root , Cycas Coralloid Root , Cycas Leaflets , Cycas Rachis , Cycas Ovules , Pinus Rootyoung , Pinus Stem Young , Pinus Dwarf Shoot , Pinus Needle , Pinus Male Cone , Pinus Female Cone , Ephedra Root , Ephedra Stem Young , Ephedra Leaf , Maize Root , Gram Root , Beet Root , Maize Stem , Dracaena Stem , Sunflower Stem , Bignonia Stem , Nyctanthes Stem , Boerhaavia Stem , Leptadenia , Salvadora , Achyranthes , Maize Leaf , Mango Leaf , Apparatus For Demonstrating Osmotic , Ganongs Demonstration , Endoosmometer , Apparatus For Experiments , Blackmans App , Apparatus To Show The Stomata , Apparatus To Measure The Loss , Potometer For Observing , Ganongs Potometer On Stand , Farmers Potometer , Apparatus To Show The Unequal , Leaf Clasp Ganongs Special Pattern , Leaf Clasp Ganongs Simple From , Transpiration Tube , Molls App. , Molls Half Leaf Experiment , Ganongs Light Screen-Strongly , Wilmots Bubbler , Respiration App. , Ganongs Respirometer , Apparatus To Demonstrate The Phenomenon , Apparatus To Show The Absorption Of Oxygen , Parometer For Measuring-The Degree , Apparatus To Show The Unequal , Leaf Clasp Ganongs Special Pattern , Leaf Clasp Ganongs Simple From , George John Mendel , Charles Robert Darwin , Louis Pasteur , Anton Van Leeuwenhoeck , Sir J C Bose , Birbal Sahni , Sunder Lal Hora , Dr H G Khorana , Sir Alexander Flemming , Plant Cell Mitosis , Plant Cell Meiosis , T.S. Stem- Monocot , Diocot Sunfloer , Monocot , Dicot , Monocot , Dicot , Root Systems , Root Modifications , Stem Modifications , Strucuture Of Flower , Calyx And Corolla , Inflorescences , Taxonomy Of Cruciferae- Brassica , Taxonomy Of Malvaceae-Hibiscus Rosa , Citrus , Lathyrus , Rosa Indica , Solanum , Allium Cepa , Zea Mays , Helianthus , Nerium Indicum , Calotropis , Ocimum Sanctum , Dhatura , Triticum Aestivum , Coriandrum , Mitochondria , Chloroplast , Nucleus , Chromosome , Dna , Protein Syntheis , Monohybrid Crossing Complete , Monohybrid Crossing In Complete , Dihybrid Crossing , Mendelian Explanation Of The , Plant Respiration , Plant Transpiration , Plant Osmosis And Root Pressure , Photosynthesis Light Reaction , Photosynthesis Dark Reaction , Glycolysis , Krebs Cycle , Marchantia Structure And Life History , Moss Life Histroy , Fern Strucuture And Life History , Cycas Life History , Ephedra Structure And Life History , Gnetum Structure And Life History , Pinus Structure And Life History , Plant Cell Ultra Strucuture , Plant Kingdom Showing Flowering And Non- Flowering Plants , Comparison Of Dicot And Monocot Plants , Fossil Plants , Classification Of Fruits , Fertilization Showing Germination Of Pollen Grain , T.S. Anther And Its Development , Megasporogenesis , Germination Of Pollen Grain And Development Of Male Gametophyte , Development Of Embryo And Endosperms , Microsporangium , Types Of Embryo Sac , Forms Of Androecium , Forms Of Gynoecium , Development Of Monocot Embryo , Placentation , Pollination Different Types , Forms Of Ovule , Forms Of Calyx And Corolla , Plant Anatomy Showing Simple Tissues, Parenchyma, Collenchyma And Sclerenchyma , Plant Anatomy Showing Complex Tissues Xylem , Plant Anatomy Showing Complex Tissues Phloem , Tobacco Mosaic Disease , White Rust Of Crucifers , Lichens , Selaginella , Lycopodium , Marsilea , Cycas: Foliage Leaf , Cycas: Corolloid Root , Cycas Male Cone , Cycas: Microsporophyll , Cycas: Megasporophyll , Pinus: Stem , Pinus: Male Cone , Pinus: Female Cone , Ephedra: Male Strobilus , Ephedra: Female Strobilus , Hydrilla , Potamogeton , Ceratophyllum , Trapa , Eichhornia , Nymphaea , Opuntia , Ruscus , Asparagus , Australian Acacia , Pneumatophore Or Respiratory Roots , Viviparous Germination , Inflorescence Of Euphorbia , Inflorescence Of Triticum Aestivum , Inflorescence Of Brassica Campestris , Inflorescence Of Achyranthus Aspera , Marsilea , Cycas: Foliage Leaf , Cycas: Corolloid Root , Cycas Male Cone , Cycas: Microsporophyll , Monocular Biological Microscope , Digital Ph Meter , Heating Mantle Coil Shape , Digital Colony Counter , Rotary Microtome , Microwave Oven , Digital Balance , Heating Mantle , Hot Air Oven , Incubator , Ph Indicator Paper Strips, Ph Range: 1-14(Pack Of 10) , Ph Indicator Paper Strips,( Pack Of 10) , Refrigerator Normal (500 Ltr)

BRR:8444549 Cctv Camera Solar Cctv Camera With Installation , 1. Solar Camera With 4G/5G Sim Operated:- • Solar 4Mp Dual Lens- Linkage , 4G/5G Sim Supported • 18000 Mah Battery • All Time Color Vision • Full Duplex Audio Intercom (Built – In High Sensitivity Mic & Speaker) • Horizontal Rotation: - 350 Degree, Vertical Rotation: - 90 Degree Dual Monitoring – One Camera For Wide Angle Monitoring And One Camera For Wide Angle Monitoring And One For Pt Detailed Monitoring • Mobile Notification On Human & Motion Detection , Customized Pre- Recorded Voice Alarm Active Defence And Siren Light Support Microsd Card Up To 256 Gb & Cloud Storage (Optional) • 6 Preset Points For Favorite Location Smart Human Detection , Motion Detection , Human Tracking • Qr Code Scanning For Network Connection Monitoring : Mobile/ Pc Software Operated • Ip66 Waterproof Rating , 4000 Lightening Protection 2. Steel Pole:- • Type : Galvanized Iron • Height : >= 5 Meters • Outside Diameter : >= 24 Cmt. • Thickness: >= 3 Mm (+/- 10%) 3. Installation, Service And Warranty Installation – Fixing The Pole Firmly With The Strength Binding Material ( Cement Concrete) Location In Forest Division Territory And Installing The Solar Camera. Warranty Of • Camera Solar Panel And Battery : >= 10 Year • Solar Power Camera Maintenance : >= 5 Years • Steel Pole : >= 5 Years

BRR:8444529 Tender For Repairing Of Existing 4 Bay Shed For Use Of Ae (Tlm) Sub Division Guna.; 1 Demolishing brick work manually/ by mechanical means ……. Etc. as per direction of Engineer-in- Charge.In cement mortar. 2 Dismantling old plaster ……. Etc. within 50 metres lead. 3 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand) 4 20 mm cement plaster of mix :1:6 (1 cement : 6 sand) 5 Providing and applying white cement based putty of average thickness 1 mm, …… Etcpermission of Chief Engineer will be required. 6 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premiumexterior) …… Etcwith anelongation of 150% and water proofing of upto 3 bars on vertical surface) 7 Wall painting by any mechanical or manual means …. Etc on new work 8 Brick work with well brunt open bhatta, bricks,………etc complete.Cement Mortar 1:6 (1 cement: 6sand). 9 Providing and laying vitrified floor tiles Multi/Double charged …….. etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm 10 Providing and laying vitrified floor tiles Multi/Double ………. etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm 11 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) etc………..Including cutting to size and shape whereverrequired. 12 Providing & fixing 35 to 40 mm thick Polished Cuddappa stone slab for tiers of cup board, ward robe and shelf below kitchen platform fixed with 12 mm etc…..engineer -in-charge. 13 Providing and placing onterrace (at all floor levels)polyethylene water storage tank etc…pipes but without fittings and the base support for tank 14 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply including alletc…..15 mm nominal outer dia.Pipes. 15 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply including alletc…..25 mm nominal outer dia .Pipes. 16 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply including alletc…..32 mm nominal outer dia.Pipes. 17 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes etc……Engineer-in- Charge.External Work40 mm nominal outer dia. Pipes. 18 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes etc……Engineer-in- Charge.External Work25 mm nominal outer dia Pipes. 19 Providing and fixing gun metal gate etc… : With C.I. wheel of approved quality (screwed end)25 mm nominal bore 20 Providing and fixing gun metal gate etc… : With C.I. wheel of approved quality (screwed end)32 mm nominal bore 21 Providing and fixing brass bib cock of approved quality 15 mm nominal bore 22 Constructing soak pit 1.20x1.20x1.20m filled with brickbats etc… . 23 Providing and fixing white vitreouschina flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, etc……. P.V.C. automatic flushing cistern. 24 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, etc….with ISI marked white solid plastic seat and lid 25 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size),etc..... total weight of cover and frame to be not less than 38 kg (weight of cover23 kg and weight of frame 15kg) :With well burnt bricks 26 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm etc….. with a single 15 mm C.P. brass pillar tap. 27 Providing and fixing S.W. intercepting trap in manholes etc….. complete : 100 mm dia 28 Providing and fixing S.W. intercepting trap in manholes etc….. complete : 150 mm dia 29 Providing and fixing PTMT soap Dish Holder having length of 138mm, etc……. 30 Providing and fixing bevelled edge mirror of superior glass (of approved quality) etc….with C.P. brass screws and washers complete. 31 Providing and fixing PTMT towel rail complete with brackets etc……. , weighing not less than 190gms. 32 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and etc……........Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 33 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and etc……........Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots etc….. . Powder coated aluminium (minimum thickness of powder coating 50 micron) 34 Providing & fixing Armstrong or equivalent make False Ceiling with Glass reinforced Gypsum, 12mm thick semi perforated designer tile of size 600x600mm False Ceilingetc……approved by Engineer-in-charge. 35 Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories etc……..Complete as required 36 Add extra for using salt and charcoal/coke for G.I. plate or copper plate etc…… 37 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of D series with etc…..but without enclosures :-Single pole MCB SP 6Amp to 32Amp 10kA rating 38 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of D series with etc…..but without enclosures :-Single poleMCB SP 50Amp to 63Amp 10kA rating 39 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of D series with etc…..but without enclosures :-For Triple pole MCB TP 6Amp to 32Amp 10kA rating 40 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of D series with etc…..but without enclosures :-For Triple pole MCB TP 50Amp to 63Amp 10kA rating 41 Supply & fixing accepted standard steel sheet enclosures of Havells, Anchor, Crompton or equivelant makeetc………... complete..Upto 6 MCB per pole 42 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc……………. etc. as required as per specification for :- Light point/fan points. Primary short point 43 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc……………. etc. as required as per specification for :- Light point/fan points. Primary medium point 44 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc……………. etc. as required as per specification for :- Light point/fan points. Primary long point 45 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc……………. etc. as required as per specification for :- Light point/fan points. Call bell/buzzer points Short point 46 Point wiring (excluding metallic switch box &sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC etc……. :- On separate board Long point 47 Wiring for circuit wiring with PVC insulated cable FRLSetc…..as per specification 2x2.5 Sq.mm. 48 Supplying, erecting and testing of approved make exhaust fanheavy duty with mounting frame, etc….. 380mm sweep RPM 900 /1400 49 Supply and fixing as per specification call bell/buzzer ofapproved make with necessary materials complete.Ding dong bell 50 Supplying, erection and testing of approved make electricCeiling fan of double ball bearing complet eetc………., with minimum air delivery 210 m³/min and service value ≥ 4.00 as per BEE.. 51 Supply and fixing Led tube rod comprising of LED tube with nonintegral/ integral driver, upto 6500K color temp having 40000 burning hrs life ……... etc. to complete the job. Tube light LED 1 X18Watt, Integral i/c batten aluminium body, PC diffuser. 52 Supply and fixing in position LED lamp of approved make9 Watt 250Volt 53 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) etc…….. All kinds of soil 54 Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - etc…. M-7.5 Nominal Mix -1 Cement : 4 sand : 8graded stone aggregate 55 Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - All work upto plinth level :With 20mm nominal size graded stone aggregate.M10Nominal (Mix-1 Cement : 3 sand : 6 gradedstone aggregate ) 56 Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - All work upto plinth level :With 20mm nominal size graded stone aggregate.M15 Grade concrete 57 Centering and shuttering including strutting,propping etc. and removal of form work for :Upto plinth: Foundations, footings, bases forcolumns, plinth beams, curtain walls, columns below plinth. 58 Centering and shuttering including strutting, propping etc. and removal of form work for :Upto plinth: Foundations, footings, bases for above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc 59 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 60 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm). 61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats onnew work. 62 P/F 2400 mm high chain link mesh 75x75 mm square size of GI wire 4 mm dia conforming to IS specification 2771-1981 including all necessary arrangment for fixing the same to angle iron post such as hooks, cleats, washers, upper & lower runner GI wire with cost of chain link mesh and all other fixtures complete as per Drawing No.T&D/DRG./MISC./2/R3 and direction of Engineer- in- Charge. 63 P&F Barbed wire (9.38 Kg per 100 M min.) to MS Angle Iron posts including screwing with GI tying wire staples or steel pins I/c cost of wire, staples pins etc. as per the direction of Engineer-In- Charge 64 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc………………………., lead up to 50 m and lift upto 1.5 m. 65 Supply, stacking, spreading and hand packing for road works, 80mm over size metal black trap, basalt or granite free from dust & foreign materialsetc. complete as per direction of Engineer-in-charge. 66 Supplying and spreading in EHV Substation yard or road works with hard moorum/ hard copra having maximum dry desnsity not less than 2 MT per cum etc…….. direction of Engineer-in-Charge. but excluding compaction 67 Compaction of moorum /earth by using SRR/DRR including hire & running expenses of roller, cost of water, T&P, labour, transportation, taxes etc. complete as directed by Engineer in charge. 68 Consolidation of oversize metal by SRR / DRR with spreading of Moorum including hire & running expenses of roller with cost of water, T&P, Labour, transportation, taxes etc. complete, 69 Providing & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 etc….. Engineer in charge

BRR:8444406 Tender For Civil maintenance work in houses No. A-701 to A-1206 located in Laplace Colony. - 1 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door with from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc complete. (DSR -9.84) 2 Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipe and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In charge . Internal work -Exposed on wall (15mm nominal outer dia pipe )DSR- 18.7.1 3 Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipe and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In charge . Internal work -Exposed on wall (20mm nominal outer dia pipe )DSR- 18.7.2 4 Refixing old glass panes with putty and nails.(DSR-14.10). 5 Renewal of old puttyof glass panes (length).(DSR-14.9). 6 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apperture with matching wood beading. DSR No-9.7.8. 7 Providing and fixing ISI marked M.S pressed butt hinges bright finished with necessary screws etc complete. 125x65x2.12 mm (DSR -9.55.1) 8 Providing and fixing ISI marked M.S pressed butt hinges bright finished with necessary screws etc complete. 100x58x1.90 mm (DSR -9.55.2) 9 Providing and fixing ISI marked oxidised M.S sliding door bolts with nuts and screws etc complete.(Copper oxidised as per IS 1378). 300x16 mm (DSR -9.62.1) 10 Providing and fixing ISI marked oxidised M.S sliding door bolts with nuts and screws etc complete. (Copper oxidised as per IS 1378). 250x16 mm (DSR -9.62.2) 11 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (DSR -9.53) 12 Providing and fixing ISI marked oxidised M.S Tower bolt black finish (Barrel type) with necessary screws etc complete. (Copper oxidised as per IS 1378). 250x10 mm (DSR -9.63.1) 13 Providing and fixing ISI marked oxidised M.S Tower bolt black finish(Barrel type)with necessary screws etc complete(Copper oxidised as per IS 1378)200x10 mm.(DSR -9.63.2) 14 Providing and fixing ISI marked oxidised M.S handles conforming to IS: 4992 with necessary screws etc complete.(Copper oxidised as per IS 1378). 125 mm (DSR -9.66.1) 15 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete.250x10 mm(DSR -9.74.1) 16 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete. 200x10 mm (DSR -9.74.2) 17 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standard and weighing not less than 690 gms , ( 15 mm nominal bore) DSR-18.51.1 18 Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved make conforming to IS:8931,(15 mm nominal bore) DSR-18.52.1 19 Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion,necessary brass screws etc.to suit shutter thickness complete.DSR-14.34 20 Providing and fixing brass bib cock of approved quality (15 mm nominal bore)DSR-18.15.1 21 Providing and fixing brass stop cock brass stop cock of approved quality (15mm nominal bore)DSR-18.16.1 22 Providing and fixing ball valve (brass ) of approved quality , high or low pressure , with plastic floats complete:( 15 mm nominal bore)DSR-18.18.1 23 Providing and fixing ball valve (brass ) of approved quality , high or low pressure , with plastic floats complete:( 20 mm nominal bore)DSR-18.18.2 24 Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( DSR-18.49.1) 25 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810 gms , ( 15 mm nominal bore) DSR-18.50.1 26 Fixing chowkhat in existing opening in brick/RCC wall with dash fasteners/chemicak fasteners of appropriate size(3 nos on each vertical member of door chowkhat and 2nos on each vertical member of window chowkhats),including cost of dash fasteners/chemical fastener.DSR-14.3 27 Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 ( m15 mm nominal bore)DSR-18.53.1 28 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35mm thick including ISI marked Stainless Steel butt hinges with necessary (DSR -9.21.1) 29 Providing and fixing water closet squatting pan (indian type W.C Pan) with 100 mm sand cast Iron P or S trap. 10 liter low level white P.V.C flushing cistern. Including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. Including cutting and making good the walls and floors wherever required. (17.1) white vitreous china orrisa patter w. c. pan of size 580x440 mm with integral type foot rest (DSR-17.1.1 ) 30 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillor taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.(17.7) white vitreous china wash basin size 630x450 mm with a pair of 15 mm c p brass pillar tapes(DSR-17.7.1 ) 31 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. DSR (17.7) white vitreous china wash basin size 550x400 mm with a pair of 15 mm c p brass pillar taps.DSR (17.7.3) 32 Providing and fixing White Vitreous china pedestal for Wash basin completely recessed at all the back for the reception of pipes and fittings. (DSR-17.8) 33 Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 meter long with S.S. trangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in- charge. (DSR-17.16A). 34 Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231 with all fittings and fixtures complete. (17.18). 10liter capacity -white(DSR-17.18.1) 35 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.DAR (17.28).semi rigid pipe 32mm dia.DSR (17.28.1.1 ) 36 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (DSR-17.31). 37 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws,rawl plugs etc,complete.DSR-17.33. 38 Providing and fixing PTMT towel rail 450 mm long with total length of 495mm,78mm wide and effective height of 88mm,weighing not less than 170 gms complete with brackets fixed to wooden cleats with C.P brass screws with concealed fittings arrangement of approved quality and color..DSR-17.73.1. 39 Providing and fixing PTMT towel ring trapezoidal shape 215mm long,200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and color,weighing not less than 88gms.DSR 17.72. 40 Providing & fixing C.P. Brass Single lever telephonic wall mixture of 15mm nominal dia with quality and make as approved by Engineer-in-charge. DSR-17.22B. 41 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter.DSR-18.22.2 42 Providing and fixing C.P Brass extension nipple (size15mm*50mm) of approved make and quality as per direction of Engineer in charge.DSR 18.53A. 43 Providing and fixing white Vitreous china Pedestal type (European type/wash down type) water closet pan. (17.15). 44 Providing and fixing fly proof wire gauze to windows , clerestory windows and doors with M.S Flat 15x3 mm, stainless steel (Grade 304)wire gauze of 0.5 mm dia wire and 1.4mm aperture on both sides and nuts & bolts complete.(10.29.2). 45 Providing & Fixing white vitreous china water closet orissa pattern W.C squatting pan of size 580 X 440mm (indian type).(17.13.2). 46 Renewing Float glass panes of nominal thickness 4mm(weight not less than 10kg/sqm) with putty and nails wherever necessary including racking out the old putty. DSR-14.5.1. 47 Renewing Float glass panes of nominal thickness 4mm(weight not less than 10kg/sqm) and refixing existing wooden fillets. DSR-14.7.1. 48 Providing and fixing brass curtain rods of 20mm diameter of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc.wherever necessary complete(14.28.1). 49 Providing and fixing PTMT stop cock,15mm nominal bore,86 mm long weighing not less than 88 gms of approved quality and color.(18.55.1). 50 Providing and fixing PTMT soap dish holder having length of 138mm,breadth 102mm,height 75mm with concealed fitting arrangements,weighing not less than 106gms.(18.65). 51 Providing and fixing PTMT concealed stop cock,15mm nominal bore,108mmlong weighing not less than 108gms of approved quality and color.(18.55.3). 52 Providing and fixing C.P brass shower rose with 15 or 20mm inlet:100mmdiameter.(18.22.1). Please Enable Macros to View BoQ information

BRR:8444069 The work of Electrification of Tanker filling point at Worli Hill Reservoir under A.E.(Maint.)W.W.City-II section.; 1 Outdoor LED Street Light fittings – 100-120 W 2 SMCJB - 1414, Hinged cover, Size 170 x 170 x 105mm 3 1st category Cu armoured cables FRLS outer sheathed- 4C x 2.5Sq.mm 4 Cable End Termination For Copper Cables – 4C x 2.5 Sq.mm 5 16A/20A SP MCB 6 32A 4P MCB 7 1x28W, T-5 Fixtures, comprises of M.S.Powder coated with endcap. The fixtures complete with high efficiency electronic ballast and PF= 0.98 complete with bright reflector & T-5 lamp 8 100mm x 100mm x 50mm size GI Junction box with kNosck out & 10Amp. Connector block /strip 9 IP43 12 Way SPN DB (4 + 8Way) 10 Light /Fan / Ex. fan Points with Modular switches & FRLSH wires 11 3/5 Pin Independent Plug (IP) with Modular switches & FRLSH Wires 12 5A/6A - 3/5 Half Plug with Modular switches & FRLSH wires 13 15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch 14 Wiring for submains- casing n cap – 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25 x 12 mm ( 3/4 in) 15 LED High Bay luminary -150W 16 Exhaust fan of 230mm sweep, 1400RPM, with 450 CFM free airdelivery, AC 230V/415V , 50 Hz, single phase / three phase complete with all necessary accessories for completing Installation .

BRR:8443920 Tender For Special Repair To Bldg No P-135 Single Living Or Accn Of 306 Asc Fd Hosp Under Ge (East) Bareilly; 1 Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 2 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 3 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and jointed in any mortar etc complete all as specified and directed. 4 Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed. 5 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 6 Excavating in trenches n. exc. 1.5 m wide, and n.exc. 1.5 m in depth for foundation etc. n.exc. 10 sqm on plan and n. exc. 1.5 mtr in depth and getting out soft/ loose soil complete all as specified and directed. 7 Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 8 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 9 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 10 Taking up or down 15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 11 Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 12 Dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and directed. 13 M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed . 14 M&L for 25 mm thick PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in floors to receive surface of tiles complete all as specified and directed. 15 M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 16 M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 17 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 18 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in vertical surface suh as skirting or dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 19 M&L for machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm cement screed bed in CM 1:6 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. 20 S&F 18-20 mm thick green marble work (table rubbed and polished) in riser & steps, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including moulding and nosing complete all as specified and directed. 21 M&L for 18-20 mm thickGraniteof black colour (table rubbed and polished) inwin dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. 22 M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor/ pavings complete all as specified and directed. 23 M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. 24 M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed. 25 M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 26 M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) (nominal mix) as in slabs supported on wall ,landing, balconies ,shelves and like including bonding agent complete all as specified and directed. 27 M&L for form work to chajja, slab ,weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat complete all as specified and directed. 28 M&L for form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. 29 S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia complete all as specified and directed. 30 M&L for brick work with fly ash old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. 31 M&L for rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. 32 M&L for 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using water proofing liquid @ 0.15 Ltr per 50 Kg bag of cement complete all as specified and directed.Note Waterproofing liquid shal be measured and paid separately. 33 M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. 34 Supply only integral water proofing liquid complete all as specified and directed. 35 S&F pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs ,hinges,lock strike plate ,etc complete all as specified and directed. 36 S&F 30 mm Plain, framed, panelled shutters (any number of panels) 2nd class HW with panels of timber flat on both sides (feather edged),or of veenered particle board medium density, wood particle board with comercial face veeners complete all as specified and directed. 37 S&F 30mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. 38 S&F 150 mm long Floor door stopper ofaluminium alloy body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. 39 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed. 40 S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 41 S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding FE-290 grade E-165 complete all as specified and directed. 42 S&F steel windows with pressed steel frame (size 95x45x1.25 mm) side hung shutter including box type hinges with steel handle ,and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauzed openable shutter without glazed bar (open in side) dovetailed or welded complete all as spd and directed and all as per drg no TD/088 dt 07 Jun 2002 Note:-(i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) Rate for filling of PCC in frame deemed to be included in quoted rate (iii) MS grill shall be measured and paid seprately under relevant item of schedule 43 S&F steel ventilators fixed type ,with glazing bars complete welded including one shop coat of Red oxide Zinc chromate primer complete all as specified and directed. 44 S&F stainless steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or stainless steel staples complete all as specified and directed 45 M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed. 46 S&F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 47 S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 48 S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. 49 S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed. 50 S&F 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller platewelded to mild steel frame.fixed in replacement complete all as specified and directed. 51 S&F 300 mm long aluminiumsliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed. 52 S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in positioncomplete all as specified and directed. 53 S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 54 S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. 55 S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 56 S&F in repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. 57 S&F in repair fancy type 150 mm size square brass CP shower rose complete all as specified and directed. 58 S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified and directed. 59 S&F in repair fancy type chromium plated brass two way bib cocksuitable for 15mm bore pipe complete all as specified and directed. 60 S&F stainless steel of grade tubular towel ring including apair of CP brass bracket complete all as specified and directed. 61 S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. 62 S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 63 S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipecomplete all as specified and directed. 64 S&F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified and directed. 65 S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 66 S&F in repair 15 mm dia fancy type stop cock, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed. 67 S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe)water closet squatt pattern complete including provn of lime concrete bedding complete all as specified and directed. 68 S&F in repair vitreous China coloured European type WC with P or S trap 75 mm dia white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. 69 S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. 70 S&F Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified and directed. 71 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. 72 S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 100 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. 73 S&FPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with neceassary fitting complete all as specified and directed. 74 S&FPVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with neceassary fittingcomplete all as specified and directed. 75 S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. 76 S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. 77 S&F PVC (SWR) 75 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 78 S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 79 M&L 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. 80 S&F designed looking mirror of any size of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified 81 S&F in replacement 20 mm dia stainless steel 1.0 mm thick fancy typecurtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed. 82 S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins, vertical post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E-250) quality-A complete all as specified and directed. 83 S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete allas specified and directed. 84 M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 40cm girth in Stone concrete block or slab walls complete all as specified and as directed. 85 Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for thesurfaces completeall as specified and directed. 86 S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, stucco embossed finish withfixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart gap to be with thermo col sheetincluding dismantled alsoall as specified and directed. 87 M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified and directed. 88 M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed. 89 M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferenttint and applying one coat of synthetic enamel paint complete all as specified and directed. 90 M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etcby skilled labour and applying two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over two coat of wall care putty of 1mm thickness complete all as specified and directed. Note:-Application to be done through authorised dealer. 91 M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coat of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machinecomplete all as specified and directed .Noe:- Application to be done through authorized applicator 92 M&L for preparation of newly plastered surface of walls and applying two coats of Dust Resistant and Anti Algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed 93 M&L for complete removal of existing treatment onsurfaces of walls including cleaning the surface throughly by using wire brushes and removing use materials from the surface and applying two coats of Dust Resistant and Anti Algal weather proof exterior emulsion paints over and including a one coat of wall care putty complete all as specified and directed. 94 M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 95 M&L for complete removal of existing treatment on ceiling,etc including cleaning of any mortar drops ,fungus efflorescent salts etc and prepration of old plastered surface and applying two coat of white wash complete all as specified and directed. 96 Taking down carefully existing Aluminum/ copper point wiring (light/ Fan/ Ind Socket/ Ind Same socket/ Power Point) complete fittings etc. making good to disturbed surface of wall/Floor etc to match the existing surface/ finishes complete all as specified and directed. 97 M&L for concealed point wiring for one light/fan point controlled by one switch 5/6 Amp one way using approved colour coding as per IS with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML No. including PVCconduitwith mild steel/pressed steel sunken box (with earth dolly) withmodular white cover plate with framefor mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dulycomplete all as specified and directed for the following :-Note:-(i) Circuit conductor from MCB DB to switch boards should not be less than 2.5sqmm (ii) Modular metal flush box or modular sunk pressed steel terminal box, modular white coverplate (uoter cover) with frame (inner) etc shall be measured and paid seperately. 98 All as per item No.97 but socket outlet 3 pin 5/6 amps same board complete all as specified and directed. 99 All as sper item No. 97 but for one socket outlet of 5/6 Amps on independent board complete all as specified and directed. 100 M&L for concealed point wiring using approved colour coding as per IS (Red , black and Green for single phase circuits),with multistranded copper conductor 2.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML No. including PVCconduitwith mild steel/pressed steel sunken box (with earth dolly) withmodular white cover plate with framefor mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed. 101 S&F Modular switches 1 way, 16 A, 1 module complete all as specified and directed. 102 S&F modular sockets6 A,-2/3 pin combined2 module complete all as specified and directed. 103 S&F modular sockets6 A/ 16 A,-2/3 pin combined2 module complete all as specified and directed. 104 S&F Modular switches 1 way, 6 A, 1 module complete all as specified and directed. 105 S&F Modular white cover plate with frame 3 module complete all as specified and directed. 106 S&F Modular white cover plate with frame 4 module complete all as specified and directed. 107 S&F Modular white cover plate with frame 6/8 module complete all as specified and directed. 108 S&F in replacement of lamp holder (batten/angle) PVC/polycorbonate type with back plate for batten / angle fittings complete all as specified and directed. 109 S&F ceilingrose surface bakelite, 65X50 mm, 2/3 terminals complete all as specified and directed. 110 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 111 S&F in replacment of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and including 2 Nos MS clamp mad of MS flat iron of 50 x 6 mm size with nut, bolts washer etc with and including two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. 112 S&F in replacement LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and including making all electric connection, complete all as specified and directed. 113 S&F in replacement sheet metal enclosure double shutter type for DBs 240 volts single pole and neutral 12 ways with 200 Amps rated bus bar complete all as specified and directed. 114 S&F in replacement SPN 6 to 32 AMP rating 240V, 10kA C curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 115 S&F in replacement SP 5 to 32 AMP rating 240V, 10kA C curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 116 S&F in replacement VTPN DB 6 way double door type including MCCB TP 63 Amps as incomer complete all as specified and directed. 117 Taking down sub main wiring of 4/6 sqmm complete all as specified and directed. 118 M&L for sub main wiringconcealed type with two single core cable PVC insulated cable with6.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size6.0Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize incl. making good the disturbed surfaces complete all as specified and directed.(Note : PVC conduit and its accessories including 2 runs of 6 Sqmm cable & 1 run of 6 sqmm earth continuity conductor cable unsheathed shall be measured and paid as single unit). 119 M&L for sub main wiringconcealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize incl. making good the disturbed surfaces complete all as specified and directed.(Note : PVC conduit and its accessories including 2 runs of 4 Sqmm cable & 1 run of 4 sqmm earth continuity conductor cable unsheathed shall be measured and paid as single unit). 120 M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.50 mtr below normal GL and connected to galvanised earth lead wire 4mm dia by means of bolts, nuts check nuts and washers of galvanized iron or steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC 1:2:4 type B-1 (using 40 mm graded stone aggregates) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 5 of SSR Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion complete all as specified and directed. 121 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 122 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 123 Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. 124 Supply, laying, connecting and testing of 50mm bore dia ISI marked GI water tubing medium grade incluing S&F all fittings and fixed complete to walls complete or laid in floors complete all as specified and directed. 125 Supply, laying, connecting and testing of 25mm bore dia ISI marked GI water tubing medium grade incluing S&F all fittings and fixed complete to walls complete or laid in floors complete all as specified and directed. 126 S&F 25 mm bore dia gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 127 S&F 50mm bore gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 128 Returning, filling inand including spreading over, leveling, wateringand well rammming in layers n.exceeding 25 cm thick complete all as specified and directed. 129 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and directed.

BRR:8443882 Tender For Additional / Alternator/Imp To Dsc Billet At Afs Amla; 1 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 2 M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floorsincluding 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slurry and pointed in white or coloured cement to match, including complete all as specified and directed. 3 All as per item No 02 above but as in skirting over 10mm th CM in 1:4 complete all as specified and directed. 4 M&L for Non- skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. 5 M&L for Glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed. 6 M&L for machine cutkota stone slab flooring 20-25mm thick including 20mm thick cement screed bed in CM 1:6 laid and mirror polish to give high glossy finish, jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing including dismantling of existing complete all as specified and directed 7 M&L for Kota stone slab 20-25mm thick in riser of steps and skirting, dado pillar laid with10mm thick rendering in CM 1:6 complete all as specified and directed. 8 Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 9 M&L for 55 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor (WPC shall be measured and paid separately) complete all as specified and directed. 10 M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg/sqm and binding with clean dry sand @ 0.05 cum per sqm etc complete all as specified & directed. 11 M&L for rendering 15 mm thick in CM 1:3 with using water proofing compound all as specified and directed. 12 M&L for PCC 1:5:10 type E-2 as in sub base of floor mass filling (using 40 mm graded stone aggregate) complete all as specified and directed. 13 S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down existing pipe line complete all as specified and directed. 14 All as per item 13 above but 20 mm bore complete all as specified and directed. 15 S & F 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwedboth ends for iron pipe complete all as specified and as directed 16 M & L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc, and making good, cutting not exc 10 cm girth brick wallcomplete all as specified and directed. 17 Disconnecting existing tanks of any capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)completeall as per specified and directed. 18 Dismantling of cast iron drain pipe of 100/75mm bore jointed in lead joints or cement joints and taking out of under floors if required complete all as specified and directed. 19 S&F PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors of dia 110mm complete all as specified and as directed. 20 All as per item No 19 above but fixed to walls complete all as specified and directed. 21 S&F PVC (SWR) bends of 110 mmcomplete all as specified and as directed. 22 S & F 110 mm bore of pipe PVC (SWR) bends with access door of any radius / shoefixed to PVC pipes complete all as specified and directed. 23 S&F PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors/wall of dia 75mm complete all as specified and as directed. 24 Supply and fix PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed. 25 S&F for PVC floor trap, plain with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1with solvent cement of dia 100mm complete all as specified and directed. 26 S & F PVC (SWR) reducers any radius 110mm bore complete all as specified and directed. 27 S & F 110mm bore PVC (SWR) junction, (single T) equal or unequal with or without door access complete all as specified and directed. 28 S & F PVC (SWR) vent cowl 75mm dia complete all as specified and directed. 29 Supply and fixvitreous china wash basin oval type size 560x400x205mmwith fixing accessorieson counter with silicone complete all as specified and directed . 30 S&F in repair vitreous china wash down watercloset pan (pedestal pattern) white (excluding fixing bolts flushing cister and slush pipe) with seat cover with CP screw complete all as specified and directed. 31 S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed. 32 S & F Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) with Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) as approved complete all as specified and directed. 33 S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle etccomplete all as specified & directed. 34 S & F 15 mm bore, Pillar taps with aerator chrome finished made of brass faucet deck mount installation type fixed to wash basin complete all as specified and directed . 35 S&F in repair bib tapof CPfancy type long body with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed complete all as specified and directed. 36 S&F chromium plated wall mixer with provision foroverhead shower complete with 115mm long bend pipe, connecting legs & wall flange,screwed down for iron pipe and fixing complete all as specified and directed. 37 S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed. 38 S&F Health Faucetchromium plated with 8 mm dia one meter long flexible tube and wall hook of same finish , screwed down, for iron pipe or for brass ferrule complete all as specified and directed. 39 S & F in repairsbrass chromium plated conceled stop/angle cock of bore size 15 mm, in position conceledin walls/ceilingsor floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces completeall as specified and as directed 40 S&F in repair angle valves CP screwed down high pressureof fancy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore complete all as specified and direcetd. 41 S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm etccomplete all as specified and directed. 42 S&Fbrass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed 43 S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed. 44 S & F32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 45 S&F Looking mirror bevelled edge mirror of selected quality glass, commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers of any size as required complete all as specified and directed. 46 S&F CP soap tray fixed to walls with rubber plugs complete all as specified and directed. 47 S&FBrass chromium plated tubular towel rail 20mm dia & 60cm long between flanges complete all as specified and as directed. 48 Demolition of concrete is reinforced (Reinforcement cut as required to faciliate demolition)of any descrition and in any position not other wise specially provided for complete all as specified and directed. 49 M&L for 18-20mm thick granite (of any type)work (table rubbed and polished ) in steps, jambs, pillars, window cills, corner shelf, cooking plateforms and like over 15mm thick screed bed in CM 1:6including pointing in white cement 1:2using marble dust with admixture of pigment to match with shade of graniteetccomplete all as specified and directed. 50 Rounding to the edge of stone slabs on edge such as cooking platform and counter top complete all as specified and directed. 51 M&L for brickwork with Fly ash brick75 kg/cmsq compressive strength oldsize , is straight or curved on plan exc. 6 metermean radius built in cement mortar 1:6 complete all as specified and directed. 52 M&L for 25mm thick cement concrete 1:2:4 type B-1,(using 20mm graded stone aggregate) as in floors to receives tiles complete all as specified and directed. 53 M&L for Complete taking down/demolition carefully any type of existing roof treatment i.e. mud puska, brick coba, brick tiles, any type of tiles, PCC, plastering, leeping etc. of any type and thickness varying from 20mm to 125mm in roofs including cleaning the surface after removal (removing the rubbish) complete all as specified and as directed. Note:- Rate ofremoval of debris out side from MoD land deemed to be included in the same item. 54 M&L for Brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and directed. 55 M&L for 25mm thick cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in padding finishing surface of concrete topping fair andevencomplete all as specified and directed. 56 M&L for 10mm thick plastering in CM (1:3) on green concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed.Note - WPC shall be measured and paid separately. 57 Material & Labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 lit per sqmincluding laying of APP based polymeric membrane weighing not less than 3.00 kg/ Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt,not less than 150gms/sq. m) land on primed surface by tension application with 100mm over lap travers and 150mm over lap longitudinalcomplete all as specified and directed. 58 Material & Labour forapplying two coats of aluminum paint @ 0.20Kg /Sqm on each coat complete all as specified and directed. 59 Taking downchowkats or frames with shuttersnot exceeding 1.5 Sqm each(without taking off shutter from the frame) complete all as specified and directed. 60 Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and refixing in same opening including necessary repairs complete all as specified and directed. 61 S&F PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube as per specification in drawing complete all as specified and directed. 62 S & F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement forstyleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top railsand bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. 63 S&F 100 mm long butt hinges stainless steel (ISI marked) fixed with stainless steel screw complete all as specified and directed. 64 S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. 65 S&F 125mm long size extruded aluminium alloy handles, cast type anodised complete as specified and directed. (ISI Marked). 66 Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. 67 All as per item No 66 above but without glazing bars complete all as specified and directed. 68 S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. 69 S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed. 70 S&F in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panecomplete all as specified and directed. 71 S&F Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. 72 M&L for Repair to steel window, ventilators & misc iron works with welding and replaced defective part & section, making function with oiling & greasing etc work complete all as specified and directed 73 S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixedto aluminium frame work complete all as specified and directed. 74 M&L for 75mm thickcement concrete 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. 75 Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete as specified and directed. 76 M&L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brickwork or concrete surfacescomplete all as specified and directed. 77 M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 onfair faces of brickwork or concrete surfaces in two layers (10+5)mm top layer 5mmmixed with liquid water proofing compound @200ml per bag of cement or as per manufacturers instruction complete all as specified and directed. Note : WPC shall be measured and paid separately 78 Supply onlyliquid Water Proofing Compound. 79 M & L for rendering 5 mm thick on ceiling on fair faces ofbrick or concrete surface in CM (1:3) finished even and smooth without using extra cement all as specified and directed. 80 M & L preparation of newly plastered surfaces and applying three coat of white wash on ceiling incl preparation of surfaces complete all as specified and directed. 81 M&L complete removal of existing surfaces and applying three coat of white wash on ceiling incl preparation of surfaces complete all as specified and directed. 82 M&L for complete removal and preparation of old decorated treatment on walls (external / internal) and ceiling finishes by scrapping with trucare wall sanderL-01/ H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Dr Fixit Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr Fixit Pidicrete URP modified mortar or as specified complete all as specified and directed. 83 M&L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 2 mm over the plastered /old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1: Mix the putty powder by adding water as per manufacturers instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.Step 3: Allow 6-8 hours time to dry the putty surface. 84 M&L for one coat of acrylic water based interior/exteriorgrade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. 85 M&L for preparation of old/ new decorated surface treatment on wall/ ceiling and applying two coats of oil bound emulsion distemper coverage 8-10 sqm /ltrof approved tint on prepared surfaces as per approved manufacturers instruction complete all as specified and directed. 86 M&L for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint with crack filling upto 5 bars of positive hydrostatic pressure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ ltr as per manufacturers instructions and all coats to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.Make : Apex Ultima Protek Asian paints paints/ Nerolac excel top guards/ Berger weather coat long life 10 87 M & L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. 88 M&L for preparation of old paintedwooden surfaces over 10 cm width or girth and applying onecoat of synthetic enamel paint etccomplete all as specified and as directed. 89 M & L complete removal andpreparation of old painted surface of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint with a coat of primer etc complete all as specified and as directed. 90 Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed. 91 Taking down & Refixing crefully ceiling fan/wall mounted fans from any height and of any make any sweep for servicing & overhauling and replacing of rubber bushing, nuts, bolts, pins etc complete all as specified and directed. 92 Taking down & Refixing crefully exhaust fan from any height and of any make any sweep for servicing & overhauling and replacing of rubber bushing, nuts, bolts, pins etc complete all as specified and directed. 93 M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade IS-694 marked drawn through in and including heavy duty grade (ISI marked) PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, with GI sunken boxeswith earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the One light controlled by one, one way switch 5 AmpsNote:- Cost of Modular Cover Plate, Inner frame suitable for mounting modular switches, socket etc are deemed to be included in the quoted rate. 94 All as per item No 93 above but one fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed. 95 All as per item No 93 above but one 3 pin Amps switch outlet point controlled by one switch on independent board. 96 All as per item No. 93 above but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. 97 S&F modular switch piano flush type, single pole, one way, 5/6 Amp single module complete all as specified and directed. 98 S&F modular switch piano flush type, single pole, one way, 15/16 Amp single module complete all as specified and directed. 99 S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. 100 S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. 101 S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. 102 S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. 103 S & F lamp holder, PVC / polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. 104 S&F Modular White cover plate with frame, 1 module complete all as specified and directed. 105 S&F Modular White cover plate with frame, 2 module complete all as specified and directed. 106 S&F Modular White cover plate with frame, 3 module complete all as specified and directed. 107 S&F Modular White cover plate with frame, 4 module complete all as specified and directed. 108 S&F Modular White cover plate with frame, 6 module complete all as specified and directed. 109 S&F Modular White cover plate with frame, 8 module complete all as specified and directed. 110 S&F Modular White cover plate with frame, 11 module complete all as specified and directed. 111 Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S&F Modular Metal GI flush box (thickness of flush box not less than 2 mm) of 1 module for mounting of modular switches and sockets including blank plate for blank module complete all as specified and directed. 112 All as per item No 111 above but 2 module complete all as specified and directed 113 All as per item No 111 above but 3 module complete all as specified and directed 114 All as per item No 111 above but 4 module complete all as specified and directed 115 All as per item No 111 above but 6 module complete all as specified and directed 116 All as per item No 111 above but 8 module complete all as specified and directed 117 All as per item No 111 above but 11 module complete all as specified and directed 118 S&F LED 10 W bulb works on AC supply complete all as specified and directed. 119 S & F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. 120 S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and necessary mounting arrangements alongwith provision of 0.75 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including suitable dia GI pipe medium grade bracket 0.75 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. 121 Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch A while deriving the Contract Sum for Acceptance.

BRR:8443863 Tender For Repair To Stone Jafri Wall Paver Tile Interlocking And Fencing In Tech Area At Afs Jaisalmer; 1 Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified. 2 Excavation in trenches not exceeding 1.50 meter wide or not exceeding 10 square meters in plan area and not exceeding 1.50 meter in depth for foundation in soft disintegrated rock soil and getting out etc complete all as specified. 3 M&L 75MM thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as sub base. 4 M&L for precast cement concrete (1:3:6) type C1 (20mm graded stone aggregate) solid block masonary exc 10 cm in width and set in CM (1:6) including demolition 5 Removing excavated material n. exc. 50 cm and depositing where directed at a level n.exc 1.5m above the starting point 6 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, fillingthe joints with fine sand and cutting ofpaver block as per required size andpattern, finishing and sweeping extra sand; complete including demolition in repair. 7 M & L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set in 1:6 screed bed 15 mm thick , jointed and pointed in neatcement slurry in floors with grey cement and pigments including demolition in repair. 8 M&L for heavy duty vetrified parking/ industrial tiles size upto 0.36 sqm each tile of thickness 10-12 mm of any type of colour and finish as approved in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thk screed bedin cm 1:6 etc complete all as specified, including demolition in repair. 9 S&F in repair Jaisalmer yellow sand stone Jallies carved as per drawing,40-50mmthick laidfix with grouting mortar chemical with on top of wall base stoneincluding stone pillars all as specified and directed by engr -in - charge including base stone of thickness 75mm to 80 mm yellow stone for gouting of jalli over wall complete as photograph attached in tender document. 10 M&L in repair for 10-15mm thick jaisalmer stone cladding polished (machine cut stone of size exceeding 0.25 sqm fixed with) fixed with chemical metal lugs over 15mm thick backing coat in CM 1:4 complete all as specified and directed as photograph attached in tender document. 11 M&L in repair for 40 to 50 mm thk thick jaisalmer stone patties with engraved pattern as per drawing 150mm wide fixed in stone pillars including all direction as specified and directed by Engr-in-Charge and as photograph attached.(stone pillar to be paid seprately) 12 M&L in repair for jaisalmer stone pillars sqare in C/S of 90-100 mm thik thick with engraved pattern as per drawing for fixing of stone patties in item 11 above all as specified and directed by Engr-in-Charge and as photograph attached in tender document. 13 Dismantling floor, hearth or wall tiling/granite including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed. 14 M&L for 20mm thick granite ( of any type) slabs/Tiles laid in floors/treads over 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite all as specified and directed. 15 Ditto all as above but in skirtings/risers with 10 mm thick backing coat in CM (1:4). 16 Demolition of Brick work, stone/boulder or block masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified. 17 M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement mortar 1:6 etc complete all as specified. 18 -Ditto- as per Sl Item No. 17 but except stone. 19 Taking down cement plaster of any description built in cement mortor complete all as specified 20 M&L for 15mm thick rendering in CM 1:4 on stone / concrete block masonry surfaces other than fair faces ofconcrete / brickis to be finished even and smooth(without using extra lime or cement) complete all as specified. 21 M&L for rendering 10mm thick on stone / concrete block masonry surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. 22 M&L 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finished even and smooth with out using extra cement complete all as specified. 23 M&L for Dubbing out in CM 1:4 average 10mm thick on irregular face of walls/ceiling complete all as specified and directed. 24 M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified. 25 M&L for prepration of new surface plastered or unplastered applying three coats of White washing on ceiling,soffits of chajjas/drop & roof projection facia etccomplete as specified. 26 M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified. 27 M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-charge. 28 M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying one coat of cement based paint in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed. 29 Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground 30 Dismantling fencing wire mesh, any type 31 M&L for PCC 1:3:6 type D-2 using 20 mm graded aggregate as in foundaton, filling and mass concrete , coping, edging , sloping etc complete all as specified and directed. 32 Excavation in post holes (or similar) each n.exc 0.5 cum, getting out in any type of soil complete all as specified . 33 M&L cement concrete in foundation filling and massconcrete1:2:4 type B-2(using 40mm graded Agg) all as specified. 34 M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion and curved or ramped portions of hand rails to required shape or figure (curved, ramped or scroll portions only measured), drilled and countersunk for balusters, nosing to steps incl embedding in concrete and screwing etc, wind ties for roof incl securing bolts: post and struts in fencing incl cutting topes to shape as directed, drilling holes, notching for wire etc, flat iron fillets incl all necessary drilling bolting or riveting etc, and similar work conf to Fe 290 grade E-165 complete all as specified and directed. 35 Supply only chain link fencing of oblong wire mesh size 100x100mm with weight n.exc 4kg/sqm complete all as specified and directed. 36 Fixing only chain link fencing incl line wires, an mesh, size and type to any type of standards, rails, strain in bolts etc incl provision of binding wire andd fixing with MS angle iron fencing posts complete all as specified and directed. 37 Preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a red oxide zinc chrome primer complete all as specified and directed. 38 Preparing old steel surfaces and applying one coats of Synthetic enamel paint etc all as specified and directed. 39 S&F in repairs galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts incl securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed(each line wire to be measured) complete all as specified and directed. 40 Supply only 10mm MS round or square bars, as in horizontal line wire/bar in available lengths, complete all as specified and as directed.

BRR:8443856 Tender For Provision Of Additional Room At Air Force School At Af Station Chabua Under Ge(Af) Chabua.; 1 B/R Portion:-Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified anddirected 2 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified anddirected 3 Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for fdn, etc or for shafts, wells, cesspits, manholes, pierholes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard / dense soil completeall as specified anddirected 4 Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm completeall as specified anddirected 5 M&L for sand filling under floors or in foundations including watering and consolidation completeall as specified anddirected 6 M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified anddirected . 7 M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregates)asin foundation, filling and mass concrete completeall as specified anddirected 8 M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 completeall as specified anddirected 9 M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius asin half brick thick wall built in CM 1:4 complete all as specified and as directed. 10 M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified anddirected 11 All as per item No 10 (here in before) but 8 to 10mm dia as in stirrups completeall as specified anddirected 12 40mm thick Damp proof course in cement concrete 1:2:4, type B-I using 20mm grade stone aggregate to horizontal or vetical surface including necessary formwork complete all as specified anddirected 13 S&F steel work in tubular pole or pole including special shaped washer etc complete using ERW or incuction butt welded tubes conforming to I.S 1161-1998 grade St 240 complete all as specified anddirected. 14 S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl gusset plat,distance pieces cleats etccomplete all as specified anddirected 15 Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified anddirected 16 S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed. . 17 S&F prepainted galvalume aluminium zinc coating GI basedplain steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as inplain sheet as in ridges, gutters , facia bd etcl, fixed with self tapping screws or J /L hooks including dismantling complete all as specified and directed. 18 M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges complete all as specified anddirected 19 M&L for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing, stair cases and similar works complete all as specified anddirected 20 M& Lfor Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widecomplete all as specified anddirected 21 M & L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded stoneaggregate)in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified anddirected 22 M & L For RCC type B-1, 1:2:4 (20mm graded stone aggerates) as in beams, cantilevers, bressummers,lintels and the likecomplete all as specified anddirected 23 M&L for 15mm thick rendering in CM 1:6 over fair faces of brick / conc wall surfaces and finishing surfaces even and smooth without using extra cement complete. 24 All as per item No 23 (here in before ) but in CM 1:4 for other than fair faces of external wall surfaces and sponge finished completeall as specified anddirected. 25 All as per item No 23 (here in before ) but 10mm thick in CM 1:3 as in ceiling finished even and smooth using extra cement completeall as specified anddirected. 26 S & F for Power coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 27 S & F Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking system etc. complete all as specified. 28 S & F galvanised mild steel wire cloth , 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks , or galvanised wire staplesstainless steel wire staplescomplete all as specified anddirected. 29 S&F sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm each pane 4mm thickcomplete all as specified anddirected 30 S & F 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified anddirected 31 M & L Flush shutter solidcore construction , with particleboard core 30 mm thick and deco rative face eneer with lipping/frame to matchon both sidecomplete all as specified anddirected 32 S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with m.s square tube supplying and fixing in opening as per specification and drawing. 33 M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing. 34 S&F 150 mm extruded aluminium alloy handles fabricated type. 35 S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed 36 S&F butt hinges 100mm, medium weight complete 37 S & F 300mm long aluminium anodised sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed . 38 S & F MS 300 mm , ordinary rat rail tail , rod pattern springs , including roller and roller plate ( Helical door spring ) complete all as specified . 39 S&F power coated aluminium grill with mesh 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc aluminium section 15 micron thick anodizing alongwith stainless steel wire cloth , complete all as specified . complete all as directed and specified complete 40 M & L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifiedand directed. 41 M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and , including 15mm thick screed bed in cement mortar 1:6complete all specified. 42 All as per item No 40 (here in before) but in skirting over and including 10mm thick screed bed in cement mortar 1:4complete all specified. 43 M&L for glazed ceramic coloured tiles (light shade) ofsize 350x250x7mm/450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cementto match over and including10 mm thick plaster in CM (1:4) complete all as specified and as directed. 44 M&L foe 20mm thickGranite (of any type) in window jambs work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. 45 M&L for kota stone slab flooring 20-25 mm thick laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed in CM (1:4) and cutting grooves in steps as ordered by engineer-in-charge complete all as specified and directed. 46 M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified anddirected . 47 M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floor subbase completeall as specified anddirected 48 M&L for 25 mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded stone aggregatecomplete all as specified anddirected 49 M & L for 75mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. 50 M & L for preparation of newly plastered surface of wall and applying two coats of OBD of approved tint and pattern over one coat of primer over a coat of 3mm thick wall care putty on wallcomplete all as specified and directed 51 M&L for preparation newly plastered surfaces of ceiling and applying two coats of OBD of approved tint and pattern over one coat of primer over a coat of 3mm thick wall care putty on wallcomplete all as specified and directed 52 M& L for preparation of newly plastered surfaces of wall and applying two coat of acrylic emulsion over a coat of alkali resistant primer of same makeover one coat of white wash complete all as specified and directed for external wallsNote : Arcylic emulsion of BERGER / ASIAN PAINT/DULUX etc with minimum warranty period of 05 years to be used with primer of the same make 53 M&L for cement concrete Type B-0 1:2:4 (12.5 mm graded stone aggregate) as in lintels upto1.5m clear span, window cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed copping, rounded or chamfered on edges and the like complete all as specified and directed. 54 Supply and fix false ceiling work of galvanised iron powder coated frame work of size 28x24x0.9mm thick angle, snap grid size (605mm X 605mm) frame work with Hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fasteners 12.5mm dia. 40mm long and including necessary boldt, nuts and washers for flase ceiling with and including 4mm thick of size 600mm x 600mm HPSC (High pressure steam cured) prelamainated self embosed, textured disigner board E classic board as in ceiling tile fixed or laid/ inserted to framework complete all as specified and directed. 55 M&L for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed 56 S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed 57 M & L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified . 58 S&F for Vitreous china urinals, half stall type (back or corner wall type), complete incl providing & fixing plugs, bedding urinal against wall in CM 1:2, suring urinals to plugs with and incl 60mm long brass screws, pointing around urinals back in cement incl PVC connection 600mm long, Brass chromium plated waste fitting 32mm with waste pipe 32 mm dia, push button tap 15mm of cast copper alloy, screwed down for iron pipe and fixed complete all as specified and directed 59 S&F for 15mm dia bore two in one bib Cock CP fency type screwed down for iron pipe 15 mm bore 60 S&F for chromium plated hand shower (health fauset), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. 61 S&F for vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nosfixing bolts incl PVC seat cover but excludingflushing cistern and flush pipe) complete including fixing of P or S trap, complete all as specified and as directed. 62 S&F for 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets., flush pipe of polyethylene of low or high density or PVC 32mm dia for low level flushing cistern, PVC connection 600 mm longcomplete all as directed by Engr-in-Charge. 63 S&F for vitreous china wash hand basin white flat back size 550 x 400 mm excl taps waste chain, plug and porcelain stopper but includingbracket, waste pipe and 32mm dia brass waste coupling/fitting complete all as specified and as directed. 64 S&F 15mm dia SwanNeckpillar taps (ISI Marked) fancy type cast copper alloy with capastan heads, chromium plated screwed down high, long screwed shanks and fly nuts screwed for iron pipe. 65 S&F for grating square fitting of size 150 mm made in two parts for smell and mosquito proofing with min 25mm water seal ofPTMT (Min wt 85 gms) complete all as specified and directed. 66 S & FPVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. 67 S&F in repairrotational moulded polythene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc inclof 20mm dia complete all as specified and directed. 68 S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed 69 S&F in repair600 x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC bldg boardor commercial ply wood and fixed to wooden plugswith CP screws and cup washerscomplete all as specified and directed. 70 S&F for 15 mm dia bore bib taps cast copper alloy , chromium plated with long shank & cup, capston head, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. 71 S&F in repair 15mm dia angle stop valvefancy chromium plated with long shank and cup concealed screwed down, high pressure, screwed both ends for iron or for unions and fixed. 72 S & F PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement 73 S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 74 All as per Item No 73 (here in before) but 75mm dia 75 S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. 76 S & F 110 mm PVC (SWR) junction single (single T) equal or unequal provided with access door. 77 S&F 110mm bore PVC (SWR) bendsprovided with access door any radius complete all as specified and as directed. 78 All as in item No.77but for 75 mm dia 79 Supply and fix 110 mm PVC(SWR) reducer 80 Supply and fix PVC (SWR) vent cowl 75mm Dia. 81 S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement 82 M & L for Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, filling etc all as specified and directed. 83 M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipe 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. 84 M & L for Precast Reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded stone agregate) asin cover slabs including necessary form work set in CM 1:4, complete all as specified and directed. 85 M & L for cutting into existing manholes for connecting new drains for 100mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore pipe line. complete all as specified and as directed. 86 S&F15 mm bore GI water tubemedium grade with all fittings and fixed to wall, floor and ceiling etc including concelaled/open completeall as specified and as directed. 87 S&F20 mm bore GI water tubemedium grade with all fittings and fixed to wall, floor and ceiling etc, complete including concealed/openall as specified and as directed. 88 S&F 1000 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including adaptor and 20mm ball brass valves , high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed 89 S & F gate valve for 20 mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. 90 S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 91 Excavating in post holes (or similar holes) each n exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil complete 92 E/M Portion:-M&L for point wiring complete with PVC insulated unsheathed FRLS-H multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 2009 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. (Note: A. Cutting chases, making good disturbed surface shall be included in quoted lump sum of schedule A Part-I and nothing extra shall be paid on this account one light point controlled by one switch. 93 All as per item No 92 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board 94 All as per item No 92 (here in before ) but point wiring with 4.0 sq mm single core FRLS cables and earth continuity wire with 4.0 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.( 01 Nos new power point to be provided in each quarters). 95 S&F Modular switch piano flush type, single pole, one way, 6 Amp 230 volts all as specified and directed 96 S&FModular switch piano flush type, single pole, one way, 16 Amp 230 volts all as specified and directed 97 S&F Modular flush type socket utlet multipurpose 3 pin 6 Amp flush type 230 volts AC complete all as specified and directed 98 S&F Modular flush type socket utlet multipurpose 3 pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed 99 S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed 100 S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed 101 S/F modular cover plate with frame, 2 module 102 S/F modular cover plate with frame, 3 module 103 S/F modular cover plate with frame, 4 module 104 S/F modular cover plate with frame, 6 module 105 S/F modular metal flush box 1/2 module 106 S/F modular metal flush box 3 module 107 S/F modular metal flush box 4 module 108 S/F modular metal flush box 6 module 109 Supply and fix LED bulb of capacity10 W all as specified and directed 110 Supply & FixingLED light Fitting1x18W , regal batten for LED incl ultra bright glass LED tubelight with very high efficiency single/double side connection all as specified and directed 111 S&F Sheet metal enclosure distribution board SP&N,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed 112 S&F Sheet metal enclosure distribution board VTPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers properwithpcc works complete all as specified and directed 113 Supply and fixing MCBs SP 6 to 32Amps,240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note:Make of the MCB should be the same as that of DB 114 Supply and fixing MCBs SPN 32Amps to 63 Amps,240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note:Make of the MCB should be the same as that of DB 115 Supply and fixing MCCBs FP 63Amps,415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note:Make of the MCCB should be the same as that of DB 116 M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivettedto earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and incl GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0using 12 mmgraded crushed stone aggregate, RCC cover etc all as shown on electrical plate No 3 of SSR - 2009 Part I. 117 Supply and draw submain wiring with two single core 6 sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unseathed conductor drawn into FR PVC casing and caping and all necessary fittings including 6 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dollycompleteall as specified and directed. 118 Supply & fixing of Bldg security light fitting LED 30/40 W, pressure die cast housingepoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. all as specified and directed. 119 M&L for onlyPVC concealed conduit pipe 20 mm dia medium grade ISI Marked complete all as specified and directed.( For AFNET Wire) 120 Supply, laying, and testing galvanised iron pipes of50 mm bore medium grade with ISI Marked with all necessary fittings ( such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc.) layingin trenches/ floors/ ducts and also cutting pipes, screwing,and for making forged bends on piping as required, complete all as specified and as directed by Engr-in-Charge. 121 Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia (1”) dia 122 M&L for cutting of existing CI/GI pipe line for insertion of tee and tail piece and jointing material copmlete all as specified 123 Supply and fix Valve, stop, screwed, 25 mm (1”) dia pipe. 124 Supply and fix Valve, stop, screwed, 50 mm (1”) dia pipe. 125 Valve pit masonary of size 600x600x600 mm for valve constructed complete with MS sheet cover and locking arrangement etc. 126 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed. 127 Material and labourfor sandcushioning to under ground Cable ( 15 cm thick before laing and 8 cm thick after laying the cable )complete all as specified and directed.Note :- Punned down thickness shall be considered for messurement 18 cm complete all as specified and directed by Engr-in- charge. 128 Supply and layingBricks comman burnt clay building bricks Old size with sub class B Designation 75. complete all as specified & directed. 129 S&FGI tube light grade 50mm dia with all fitting and laid in floors, under road, pavement or hard standing for protection of earthing strip including takingout GI pipe complete all as specified and directed.

BRR:8443761 Purchase Of Stationery Items For Coe , Supply Of Stationery Items , 12 Digits Desktop Basic Calculator Led Display, Powered By : Solar And Battery , 132 Column - Single Part -Dot Matrix Carbonless Paper 70 Gsm (Reem) , A3 Box Type Cloth Lined Cover (Plain) , A3 Paper - 80 Gsm (Ream) , A4 Spiral Sheet - Colour : Pink (100 Pieces Per Pack) , A4 Spiral Sheet - Colour : Red (100 Pieces Per Pack) , A4 Spiral Sheet - Colour : Violet (100 Pieces Per Pack) , A4 Spiral Sheet - Colour : White (100 Pieces Per Pack) , A4 Spiral Sheet - Colour : Yellow (100 Pieces Per Pack) , Ball Pointpen - Colour : Blue (0.7Mm Fine Writing Premium Quality) , Ball Pointpen - Colour : Red (0.7Mm Fine Writing Premium Quality) , Battery - Aaa (10 Pieces Per Pack) , Battery -Aa (10 Pieces Per Pack) , Brown Envelope Cover - Size : 11” X 4.5”, 90 Gsm (100 Nos. Per Pack) , Cellotape - Colour :Green, Size : 2 (25 Meter) , Cellotape - Colour : Dark Blue, Size : 2 (25 Meter) , Cellotape - Colour : Dark Pink, Size : 2 (25 Meter) , Cellotape - Colour : Red, Size : 2 (25 Meter) , Cellotape - Colour : Violet, Size : 2 (25 Meter) , Cellotape - Colour : White, Size : 1 (60 Meter) , Cellotape - Colour : Brown , Size : 2 (25 Meter) , Chart-Colour : Blue , Chart-Colour : Green , Chart-Colour : Pink , Chart-Colour : White , Chart-Colour : Yellow , Exam Thread (1000 Tags Per Pack) Size : 17 Cm , Glue Stick - Non Toxic (25 Gram) , Green Pen (Gel Type) (0.7Mm) Assorted Ball Point Tip Pack Of 30 , Note Pad - Unruled, Size : A5, No. Of Pages : 13 , Paper Counting Sponge , Pencil (10 Nos. Per Pack) , Sealing Wax - Design Type: Rectangular (10 Pieces Per Box) , Sketch Pen - Color : Blue , Sketch Pen - Color : Dark Pink , Sketch Pen - Color : Green , Sketch Pen - Color : Red , Sticky Notes - Size : L - 4 X W - 0.5 (1Packet) , Whitener (7 Ml) , Ohp Transparent Sheet A4 Size (100 Nos Per Pack) , Graph Sheet (100 Nos Per Pack) , Polar Graph Sheet (100 Nos Per Pack) , Drawing Sheet (250 Nos Per Pack ) (Gsm 80 Size : 58.5 X 45.5) , Candle - Length : 6 (10 Piece Per Pack) , Match Box (10 Pieces Per Pack)

BRR:8443759 Tender For Construction Of Fair Price Shopin Ward No 14In Kaveripakkam Town Panchayat; 1 Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification 23 & 24VI (S2) VII.9,10 2 Fillig with good dry m-sand including cost and conveyence to site and labour charges for filling watering tampaing etc, complete 3 Cement concrete in 1:4:8 [one cement and four sand andeight aggregate ] using40 mm size ISS grade machine crushed chips including the cost of mixinglaying curing etc., complete complying with standard specification. 4 Supplying, fabricating and placing in position of Steel Reinforcement using TMT steel rods, for all RCC worksas per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per standard specifications. 5 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - 6 Supplying and Erecting Steel Centering for sides andsoffits including supports and strutting upto3.29 m height for planesurfaces such as RCC Slabs, Rectangular Beams, TEE or ELL Beams, Lintels, Bed blocks, Staircase waist and Landing slabs, Landing Beams, canopyetc., with all cross brasingsusing mild steelsheets of size 90cmx60cm and 10 gauge stiffenedwithwelded MS anglesof size 25mmx25mmx3mm for boardinglaid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/cetc., complete complying with standard specification and as Directed . 7 For Column 8 For Plinth beam 9 For Beam and Roof slab 10 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. 11 Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9X43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification.- 12 In Foundation and basement 13 For Superstructure 14 Collection Supply and Filling ofwell gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification 15 Supply and fixing of 50mm thick RCC precast 1200mm dia. Collar, including cost and coveyance and all labour charges etc. 16 Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct. 17 SupplyingandFixingofPush and Pull type RollingShutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., and as directed by Engineer incharge. S.OR. TWAD 110.0 18 Supply and fabricarion ofM.S. ornamental iron grill for Windows and Ventilaters including cost of angles, plates, sheets, fabrication charges, cost of hold fast,with locking arrangements and transportation charges etc., complete as per Departmental Instructions. 19 supply and fixing of 4 mm thick Glass for Ventilator, Inculuding cost of glass all labour charges eetc., complete as per Departmental instructions 20 Special ceiling plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of thework and surface should free from undulationsand including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortaretc.complete complying with standard specification 21 Plastering in cement mortar 1:5 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of thework and surface should free from undulationsand including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortaretc.complete complying with standard specification 22 Paving the floor with best approved quality polished Rajasthan Kota stone slabs of size 600 x 600 of 20mm thick with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. 23 Supply and delivery of following item of materials with ISI mark 24 a).90 mm OD PVC Pipe 6ksc 25 b). 90 mm OD PVC Elbow 26 c).63mm OD PVC Pipe 6ksc 27 d).63mm OD PVC Vent Cowl 28 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. 29 White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. 30 Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 31 Wiring with 2x1.5 sqmm(22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100v grade in suitable PVC rigid Pipe on Wall and celling with PVC accessories with TW switch box with 5A F.T switch infulsh with wall, covered with hylem sheet of 3MM thick with painting of suitable colour for Concealed PVC light point/fan point(for electronic regulator).S.D : 25 32 Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigidpipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter lockingWall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC plug point.S.D 36 33 Supply and fixing of 1200mm(48) sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110. 34 Supply and fixing of Single box type 440 w LED fitting complete with copper Chokes and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from the terminals to the fittingSD442 35 18 w LED 36 Supply and run of 2x4 sqm PVC insulated SC unthethd Cu.conductor of 1100V grade on 7/20 GI bearer wire for over Head service connection mainsS.D 64 37 Supply and run of 2x4 sqm PVC insulated SC unthethd Cu.conductor of 1100V grade in 25mm dia. GI pipe ( class B ) bend at both ends with necessary angle iron up right and end supports mains S.D 69 38 Supply and fixing of fancy glass shade WT BH point for 15W with ISI mark., SD.80 39 Earthing as per PWD standard with an earth electrode of 2 metre Class B GI pipe of dia not less than 32mm completewith necessary masonry work SD 212 40 Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCBs should be with ISI mark SD 514

BRR:8443539 Bids Are Invited For Custom Bid For Services - Attending Sanders & Filling Up Of Sand In Sand Boxes Of Ac/Dsl Locos Of Freight & Coaching Trains At Crew Changing Points At Bsl, Bd, & Knw Depot Of Bhusawal Division , Custom Bid For Services - Supply Of Clean Silica Sand Free From Clay, Loam, Mica & Other Foreign Material, Packed In 10 Kgs / 20 Kgs Water Proof Bag At Bsl, Bd & Knw Depots Facility Management Services - LumpSum Based Facility Management Service - Outcome Based Manpower Outsourcing Services - Fixed Remuneration Facility Management Services - LumpSum Based Facility Management Service - Outcome Based Manpower Outsourcing Services - Fixed Remuneration Total Quantity :

BRR:8443418 Bids Are Invited For Digital Vhf Repeater Set As Per Mha Qr (Q2) Total Quantity : 1

BRR:8443371 Bids Are Invited For Gis Related Survey Services - Sq. Meter; Carrying Out Contour Survey At 0 Point 3 Meter Interval In Upstream And Downstream Of The Proposed Barrage On The River Mahananda And Establish Bench Marks With Coordinates And Reduced Level As Per Specificati.. , Gis Related Survey Services - Per Cross Section; Conducting Topography And Hydrography Survey And Preparation Of Cross Section Across The River Bank To Bank In Upstream And Downstream Of The Proposed Barrage Site 60 Cross Section For 1 Site; As Pe.. , Gis Related Survey Services - Kilo Meter; The Proposed Alignment Of The Main Canal And Branch Canal Has To Be Surveyed L Section And Cross Section Survey Will Be Carried Out As Per The Following Specifications 1 Longitudinal Section At The Rate .. , Gis Related Survey Services - As Per Tender Document; Transfer Of Gts Benchmark To The Site And Construction Of Pillars Tbm; As Per Tender Document; As Per Tender Document; As Per Tender Document

BRR:8443253 Bids Are Invited For Video Server Devices , 08 Port Serial Device Server , Rugged Compact Ethernet Switch 24Port , Nre Charges, Ess Testing, Qap Documentation, Integration Support And Any Other Charges , Fire Control Processing Module , Multi Display Console Unit , Data Receiving And Alerting System , Live Remote Temperature And Humidity Monitoring And Alert System Total Quantity : 13

BRR:8443204 Tender For Tubewell With Submerssible Pump And Layout Of Pvc Pipeline With Tapping Point At Chakdwipa Near Maniraj Pandit House Booth No-214 Under Ward No-18 Within Haldia Municipality (Apas).

BRR:8443202 Tender For Tubewell With Submerssible Pump And Layout Of Pvc Pipeline With Tapping Point At Monichak Near Manna Para House Booth No-213 Under Ward No-18 Within Haldia Municipality (Apas)

BRR:8443168 Tender for Sinking Of Tubewell With Submerssible Pump And Layout Of Pvc Pipeline With 10 (Ten) Nos Tapping Point At Gandhinagar Block - B, Suraj Manna House, Booth No-240 Under Ward No 26 Within Haldia Municipality (Apas).

BRR:8443097 Tender for Supply & Installation Of Public Address System On Hire Basis In C/W Ganga Sagar Mela 2026.

BRR:8443092 Carrying out Falling Weight Deflectometer (FWD) test and other necessary field works & calculations, Structural evaluation of Pavement by cutting pit with photograph (and filling of the excavated pit), Conducting traffic census for a continuous period of 7 days (7 x 24 hrs), Axle Load Survey in connection with “Bethberia-Dhosar Bridge Road via Nepor more from 0.00 kmp to 13.00 kmp, Widening, (from single lane to intermediate lane) and strengthening including drain, footpath etc. under south 24 pgs division, PWD in the of south 24 parganas during the year 2025-2026 under-RIDF-XXXI ”- 1 CTVC 2 Axle 3 Soil Pit 4 Soil Test All Test done 5 Repeat Test 6 Inventory 7 Topographical SurveySurvey by DGPS 8 Videography 9 Carrying out pavement design 10 Power Point Presentation 11 Estimate & Drawing Peparation 12 Printing Report & drawings

BRR:8442431 Bids Are invited for 2Mp Outdoor Ip Camera - 2Mp Outdoor Ip Camera, Ir Range 30M Or Higher,Video Compression H.265, H.264, Motion Detection , Tamper Detection, Supported Protocols Tcpip, Https, Rtp,Ntp, Icmp, Upnp, Udp In Nos. , 4Mp Ip Outdoor Camera - 4Mp Or Higher Outdoor Ip Camera, Ir Range 30M Or Higher,Video Compression H.265, H.264, Motion Detection , Tamper Detection, Supported Protocols Tcpip, Https, Rtp,Ntp, Icmp, Upnp, Udp In Nos. , 32 Channel Nvr - 32 Channel Nvr Supports Minimum 16 Sata Hdds, Supports Minimum 2 Usb Ports, Raid Support , Onvif Support, Mobile Software Support, Video Compression H.265, H.264, Ethernet Ports Minimum 2 With The 1G Or Higher, Minimum 2 Hdmi Ports With Accessories In Nos. , 16 Channel Nvr - 16 Channel Nvr Supports Minimum 16 Sata Hdds, Supports Minimum 2 Usb Ports, Raid Support, Onvif Support, Mobile Software Support, Video Compression H.265, H.264, Ethernet Ports Minimum 2 With The 1G Or Higher, Minimum 2 Hdmi Ports With Accessories In Nos. , 16 Tb Sata Hard Disk - 16 Tb Surveillance Hdd In Nos , 32 Inch Led Monitor - 32 Inch Led Tv With Mounting Accessories In Nos. , Hdmi Cable 15 Meter - Hdmi Cable 15 Meters , Wireless Mouse - Wireless Mouse With Mouse Pad , 9U Network Rack - Network Rack 9U With Pdu, Fan Tray, Cable Manager , 24X 1G Port Poe Switch - Poe Switch 24X 1G Sfp Port Or Higher , 16X 1G Port Poe Switch - Poe Switch 16X 1G Sfp Port Or Higher , Cat6 Cable - Cat6 Cable Utp 305Meter , Pvc Ip Camera Backbox - Pvc Ip Camera Back Box With Accessories , 1 Inch Pvc Conduit Pipe - 1 Inch Pvc Pipes In Meter , 1 Inch Pvc Conduit Bends - 1 Inch Pvc Bends , 1 Inch Galvanized Conduit - 1 Inch Galvanized Steel Flexible Conduit In Meter , Rj 45 Connector - Rj45 Connector Module Plug In Box , Usb Rj45 Extender , Ip Camera Bird Spikes - Bird Spikes In Nos. Total Quantity : 1559

BRR:8442405 Bids Are Invited For Microphone Wireless Cardioid Boundary Layer /Table Top , Wireless Supercardioid Microphone (Sl Handheld Set Dw) , Collar (Lapel) Wireless Omni Directional Microphone , Pa Speaker System , Integrated Pa System Total Quantity : 23

BRR:8442373 Bids Are Invited For Mobile Phone With Basic Features , Feature Mobile Phones Total Quantity : 25

BRR:8442124 Bids Are invited for 1200013116 Cat 6 Point 0 Certified Rj45 Connectors Packet Of 50 , 1200013095 Cat 6 Point 0 Certified 23Awg Copper Cable Box Of 305 Mtr Packing - 1200013095 Cat 6 Point 0 Certified 23Awg Copper Cable 30 Box Of 305 Mtr Packing , 1700009234 Cat 6 Point 0 Certified Lszh Patchcord 1 Meter Each , 1700010105 Cat 6 Armoured Outdoor Cable Box 305 Mtrs , 1200012424 Cat 6 Patch Cord 7Ft Each Total Quantity : 105

BRR:8442067 Bids Are Invited For Dew Point Meter (Q3) Total Quantity : 2

BRR:8442065 Bids Are Invited For Tentage Service Lumpsum Based - Less Mass Marriage Scheme; Less Mass Marriage Scheme-rovide 05 photographs along with an album to the bride after her marriage. (For marriage - Jaimala, Pheras, Sindoordaan, Kanyadan, with family and at a selfie point. For Nikah - with family, joint photo of the bride and groom at the signing ceremony, at the time of farewell, and at a selfie point.) Note: For this purpose, one photographer will be arranged for every 25 couples.2For marriage, two rose garlands; for Nikah, a Sehra (headdress) of Bela/Jasmine flowers.3Turban/Safa (for the groom)4Dakshina/remuneration for the priest and Maulvi for solemnizing the marriage.5German hangers will be arranged for marriage ceremonies involving 100 or more couples. For ceremonies involving fewer than 100 couples, the ceremony will be held in a wedding mandap/marriage hall.6Decoration (grand and attractive decoration of the stage and pandal)7Two to four large-screen LEDs at the venue8A grand and attractive floral-decorated entrance to the venue, with a banner related to the event.9Arrangement for a loudspeaker/soundbox/microphone1011A banner for the stage, displaying the name of the scheme, photographs of the Honorable Chief Minister of the state, the Honorable Minister of the department/minister in charge of the district, and the names of distinguished guests.Arrangements for refreshments for the bride and groom and 10 members of their party. (Bananas - 02, Samosas - 02, Burfi - 01 piece, Chips - 50 grams, Water Bottle - 500 ml, Cold Drink Bottle - 250 ml, (Sherbet / Shikanji / Tea / Coffee - as per season) Note: 20 packets of snacks will be made available to the couple at the time of their presence at the event, and beverage stalls (Sherbet / Shikanji / Tea / Coffee - as per season) will be set up to provide them.12Meal arrangements for the bride and groom and 10 people from their side. (Dal, rice, roti, puri, kachori, dry vegetables, mixed vegetables, paneer curry, salad, rasgulla / kheer halwa, chowmein, etc.)

BRR:8442026 Bids Are invited for 2200007897 4Mp Ip Based Camera , 2200005691 Ptz Camera With Ultra Hd Imaging System , 1700265600 Pass Nw Comp Ofc Cable Opt 12 Single , 1700011017 Hdpe Pipe 32 Mm For Ofc Cable , 1600199345 Network Video Recorder Nvr 8 Channel , 1600037505 Poe Switch Tp Link , Installation And Commissioning Ofc Trenching And Backfilling , Installation And Commissioning Hdpe Duct Laying In Existing Trench , Installation And Commissioning Ofc Laying In Existing Duct , Installation And Commissioning Ofc Splicings , Installation And Commissioning Misc Items Total Quantity : 9659

BRR:8441994 Bids Are Invited For Usb Video Conferencing System With Audio System , Audio Video Cable Video Conferencing End Point With Integrated Display Total Quantity : 1

BRR:8441924 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - 250000; Other; Comprehensive Maintenance Contract (Cmc); 250000; Yes -HF/VHF/FM Manpack Radio, Vehicle Radio Set

BRR:8441880 Bids Are Invited For Title1 DUAL CHANNEL POWER AMPLIFIER 3200W Title2 HIGH POWER AMPLIFIER 1000W Title3 PA AUDIO MIXING CONSOLES STEREO Title4 PA AUDIO MIXING CONSOLES STEREO Title5 PA MICROPHONE Title6 PA GOOSE NECK MICROPHONES Title7 PA MICROPHONE BASE Title8 PA REFLEX HORNS Title9 PA DRIVER UNITS Title10 PA WALL SPEAKER Title11 PA SPEAKER SYSTEM 500W Title12 PA SPEAKER SYSTEM 1000W Title13 SUBWOOFER 1000 W Title14 PA VHF WIRELESS MICROPHONES Title15 PA UHF WIRELESS MICROPHONES Title16 PA MICROPHONE STAND Title17 PA MICROPHONE STAND Title18 PA MICROPHONE STAND Title19 PA TRIPAD SPEAKER STAND Title20 SPEAKER CABLE Title21 XLR CABLE FOR MIKE TO AMPLIFIER Total Quantity : 865

BRR:8441878 Bids Are Invited For Handling And Transport On Lumpsum Basis - Handling And Transportation Contract At Chintalapalli Rake Point

BRR:8441846 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - As Per Attached Scope Of Work; As Per Attached Scope Of Work; Comprehensive Maintenance Contract (Cmc); As Per Attached Scope Of Work; No--Comprehensive Maintenance Contract (CMC) of 05Nos. of All in one Computers, 53Nos. Desktop Computers & Peripheral sets (including wired/wireless Keyboard & Mouse), 52 Nos. of Printers/Multifunction printers/DMP Printer, 56Nos. of Thin Client, 06 Nos. of Online UPS System, 05Nos. of Offline UPS, 07Nos. of Network switch& Peripheral sets, 01Nos. Photocopier, 01Nos. NVR, 08Nos. Network Camera 03Nos. Biometric Devices, 04Nos. Scanner, And Non-Comprehensive Maintenance Contract (AMC) of 13Nos. of All in one Computers, 47Nos. Desktop Computers , 10 Nos. of Thin Client, 05Nos. of Network switch, 12 Nos. Network Camera

BRR:8441841 Bids Are invited for 65 Mm Slugging Spanner 12 Point Ring - Conforming To Is 4509 (1992) With Latest Amendments, Moc T40 Ni6cr4mo3 Or T50cr4v2 Alloy Steel , 65 Mm Box Type Slugging Spanner - Conforming To Is 4509 (1992) With Latest Amendments, Moc T40 Ni6cr4mo3 Or T50cr4v2 Alloy Steel , 85 Mm Slugging Ring Spanner 12 Point - Conforming To Is 4509 (1992) With Latest Amendments, Moc T40 Ni6cr4mo3 Or T50cr4v2 Alloy Steel , 1 Inch Drive Sliding Impact T Handle. - Sliding T Handle, Moc Chrome Vanadium Steel , Allen Key 12 Mm - Conforming Standard Bs-2470 Or Asme -B18.3, Moc Chrome Vanadium Steel , Allen Key 14 Mm - Do , Allen Key 22 Mm. - Do , Ellen Key 32 Mm - Do. , Dial Gauge Plunger Type 0 To 10 Mm - Acuracy 0.013 Mm, Resolution 0.01 Mm, Dial Reading Scale 0 To 100, Range 10 Mm , Dial Gauge Plunger Type 0 To 5 Mm - Acuracy 0.013 Mm, Resolution 0.01 Mm, Dial Reading Scale 0 To100, Range 5 Mm , Screw Driver 24 Inch - Blade Length 400 Mm, Blade Dia 10 Mm, Tip Dimension 10X 1.5 Mm , Round File 12 Inh Bastard - Conforming To Bs 498 1990 , Flat File 12 Inch Medium Cut - Conforming To Bs 498 1990 , Hammer 2.5 Kg - 2.5 Kg Carbon Steel Sledge Hammer With Fibreglass Handle. Total Quantity : 23

BRR:8441817 Bids Are Invited For Point - Of - Care Hemoglobinometer Total Quantity : 19

BRR:8441814 Bids Are Invited For Software Based Solution For Mobile Phone Forensic And Photo Recognizer (Q2) Total Quantity : 1

BRR:8441769 Bids Are Invited For Fluke Tl75 Hard Point Test Lead Set Total Quantity : 38

BRR:8441692 Installation Of 5 (Five) Points Of Shallow Tube Well Irrigation Scheme At Nalbari Lac Under Sopd-G For The Year 2025-26

BRR:8441689 Bids Are Invited For 12U Network Rack With Power Pdu And 2Nos Fan Size 600Mm X 600Mm , 24 Port Network Managed Switch 24 X 10 Or 100 Or 1000 With 4Sfp , Cat6 Utp Cable Box 305 Mtr X 1Box , Cat6 Utp Patch Cord 1 Mtr , Cat6 Utp Patch Cord 2 Mtr , 24 Port Fully Loaded Patch Panel , 24 Slot Cable Manager , Cat6 Io Or Keystone , Cat6 Face Plate , Io Or Back Box , 12 Core Ofc Single Mode Fully Loaded Liu With Pigtails , 1G Sfp Transceiver Single Mode Module , 12 Core Single Mode Ofc Cable , Sc To Lc Single Mode Ofc Patch Cord 3 Mtr , 32Mm Pvc Conduite Pipe With Accessories , 25Mm Pvc Conduite Pipe With Accessories , 1 Point 5 Inch Casing And Capping With Accessories , Work Accessories Ghatta Srew Clamp Tie Tap Bend Color Flexible Hose Etc , Laying Of 12 Core Single Mode Ofc Cable , Laying Of Cat6 Utp Cable , Laying Of 1 Point 5 And 2 Inch Casing Capping With Accessories , Fixing Of Back Box , Fixing Of Face Plate , Termination Of Cat6 Io Or Keystone , Termination Of 24Port Fully Loaded Patch Panel , Testing Of Cat6 Utp Lan Points Fluke Test , Laying Of 32Mm And 25Mm Pvc Conduit Pipe With Accessories , Laying Of 12 Core Ofc Single Mode Fully Loaded Liu With Pigtails , Splicing Of Single Mode Ofc Cable , Otdr Testing Of Ofc Cable , Dressing And Patching Of Network Rack , Installation And Configuration Of Network Switches , Labling And Documentation Total Quantity : 1788

BRR:8441661 Bids Are invited for Cleaner White Toilet - Harpic , Cotton Waste - White , Duster Cloth A - Big Size , Cloth Sponge - 18 Cm X 20 Cm , Cleaning Bar For Utensils - 500 Gm Pack , Scrubber Pad - 3X4 , Brush Sweeping Hand - Soft Broom , Super Mop - Refils , Polish Metal Brass - 500 Ml Pack , Feather Broom - Broom , Glass Cleaner - 500 Ml , Hand Towel - White , Wiper Long Handle - With Handle , Room Freshner - Odonil , Rags Cotton - Coloured , Hand Wash Liquid - 250 Ml , Disinfectant Fluid White - Phenoil , Cleaning Liquid For Utensils - 250 Ml Pack , Spin Mop Set - Set , Pest Seal - Hit , Refill For Automatic Air Freshener - 250 Ml Pack , Urinal Screen Mat - Mat , Mosquito Repellent Machine Kit - With Machine , Rat Sticking Gel - Pad , Dust Bin With Cover - With Lid , Distilled Water - 1 Ltr Pack , Naphthalene Balls - 1 Kgs Pack , Bucket Plastic - 15 Ltr Capacity , Detergent Powder - 1 Kgs Pack , Soap Liquid Toilet - 5 Ltr Pack , Envelope Cloth Coated - 9 Inch X 14 Inch , Tape Transparent - 2 Inch , Wonder Tape - 2 Inch , Antirust Spray - 250 Ml , Tape Transparent - 1 Inch , Toilet Paper - Roll , Brown Sheet - Laminated , Paint Brush - 4 Inch , Paint Brush - 2 Inch , Tape Insulation - 25 Mm , Anti Cockroach Gel - Tube , Alkaline Battery Aa - 1 Point 5 V , Dvd - With Cover , Paper Napkin - Pad , Araldite Adhesive - 180 Grms , Synthetic Foot Mat - 3X2 Feet , Tray Paint Roller - Plastic , Paint Brush - 3 Inch , M Seal - 250 Gms Pack , Tape Roll Seal Teflon Thread - 12 Mtr Total Quantity : 1591

BRR:8441608 Bids Are Invited For Manpack Antenna Cum Mast , Vehicular Antenna Cum Mast , Mast For Base Station Total Quantity : 22

BRR:8441507 Bids Are Invited For Compact Pa System With Accessories Total Quantity : 1

BRR:8441382 Bids Are Invited For 1000070197 Sensor- Amt-Sdc For Dew Point Analyzer Total Quantity : 4

BRR:8441341 Tender For supply of Fmc Lpc Breakout Board Etc Mse , Idc Ribbon Cable For Zedboard -Pmod , Test Point Headers For Zedboard - Pmod , 2X20 Idc Cables F-F , Din Idc To Terminal Blocks Breakout Board , Sdp-B Controller Board , Rtd To Digital Converter Board , Sic Photodiode-Uv - Sic Photodiode -Uv , Si Photodiode -Visible , Ingaas Photodiode-Ir - Ingaas Photodiode -Ir , Smd Pcb Blank , Pcb Mount Idc Header 2 X 20 Pin Total Quantity : 132

BRR:8441281 Bids Are invited for Cap Itraconazole 100Mg , Tab Apixaban 2 Point 5Mg , Tab Metformin 1000Mg Plus Vildagliptin 50 Mg , Syp Potassium Chloride Kesol 1 Point 5 Gm 15 Ml , Tab Acebrophylline 200Mg Sr , Alpha Lipoic Acid Plus Chromium Plus Folic Acid Plus Mecoba , Tab Atorvas 40 Mg Total Quantity : 13860

BRR:8441276 Bids Are invited for Room Freshner , Cleaner White Toilet Or Harpic , Disinfectant Fluid White Black , Paint Signal Red , Paint Navy Blue , Paint Epoxy Alluminium Primer , Paint Black Enamel , Paint Black Heat Resistant , Spin Mob Set , Tube Fluroscent Led Cfl , Lamp Cfl Or Led , Battery Aa Alkaline1 Point 5V Lr 6 , Paint Roller Refill 4 Inch , Corrosion Inhibitor , Bag Gunny 27Into21 , Torch Cell 1Point5v Std , Synthetic Foot Mat 3Into2 Feet , Freon Gas R404 A , Grease Lg 200 , Varnish , Jerry Can 20 Ltrs , Aqua Bond Putty Total Quantity : 302

BRR:8441228 Bids Are invited for Bullet Camera , Monitor , Cat 6 Cable 305M Per Roll , Dvr 1Tb , Rj 45 Connector , Cable Ties Total Quantity : 28

BRR:8440974 restoration Of Cbds Damaged/Likely To Be Damaged During Rainy Season At Specific Points On The External /Sector Dividing Roads Of Panchkula City (Package-Ii)

BRR:8440963 Construction Of Opd With Emergency Block In 50 Bedded Hospital At Kalanaur In District Rohtak (Providing Cctv, Lan, Epabx And Fire Alarm System Only) Recall Provision Of Bullet / Dome Camera, Cat-6 Cable, 22 U Rack, 32 Channel Nvr, Ip-Pbx, Digital / Analog Phones, Mdf, Ups, Patch Code, Control Panel, Smoke Detector, Mcp, Exist Sign Board Etc.

BRR:8440779 Bids Are invited for Tab Voglibose 0 Point 2Mg , Tab Dapagliflozin 10Mg , Tab Ranolazine 500Mg , Semi Auto Analyser Printing Paper Roll Thermal 57Mm X 30 Mtrs , Serum Haemagglutinating Gp A Anti B , Serum Haemagglutinating Gp B Anti A , Gamma Benzene Hexachloride 1Percent Cetrimide 0 Point1 Percent In Alcoholic Solution , Tab Terbinafine Hcl 250Mg , Syp Cyproheptadine 2 Mg Per 5 Ml , Dressing First Aid Unmedicated Sterile Pack , Serum Anti D Igg Plus Igm , Tab Methylcobalamine 1500Mcg Alpha Lipoic Acid 100Mg Myo Inositol 100Mg Fa 1Per 5Mg Chromine 200Mg Selenium 55Mg Benfotaminbe 150Mg , Evening Prom Ise 1000 Cap Total Quantity : 15547

BRR:8440708 Bids Are invited for Cable Laying , Cable Laying , Break Glass Unit , Supply Of Man Power , Supply Of 4 Inch Gate Valve , Battery Engine Greaves , Supply Of Dc Ups , Erect Of Scaffolding Metallic , Lpg Hose , Servicing Of Gate Valve 3 Inch , Double Hydrant Point , Refilling Of Scba , Discharge Hose Fe 75Kg Dcp , Refilling Of Abc Type Fe , First Aid Box , Safety Gift , Detector Hand Held , Spark Arrestor 2 Inch , Spark Arrestor 3Inch , Traffic Cone Conical Pu , Nitrogen Cylinder Refill , Overhauling Of Valve Ball 2Inch , Preparation Of Drawing Cad , Servicing Of Ball Valve 3Inch , Testing Of Srv , Testing Of Srv , Srv Trv Inspection Testing , Pressure Testing At Lpg Plant , Loto Station , Sply Fxg Of Chain Link Fencing , Sply And Fixg Of Fencing Barbed Wire , Lpg Hose , Servinch 3Inch Gate Valve , Supply Flange 4Inch , Sply Instln Sprinkler Nozzle , Sply And Fixg Of Ball Valve , Gate Valve 80Mm Servicing , Sply And Fixg Of Ball Valve , Construction Of Earth Pit Plate , Prepare Earthing Grid Diagram , Amc Of Ups , Structural Painting , Personal Visit , Festival Celebration Expenses , Providing Services Of Painting Lettering , Sply And Painting , Sply And Painting Of Emulsion , Service Kit Emergency Release Coupling , Barbed Wire Fencing , Sup And Inst Of Wrap Coatcleanof Pl , Pressure Transmitter , Ultrasonic Testg Of Fe 9Kg , Hydrant Hose , Fire Proximity Suit , Scba Set , Low Temp Suit , Gas Sensor , Explosimeter Portable , Cartridge , Cartridge , Universal Nozzle , Cartridge , Gate Valve 4 Inch , Non Return Valve , Cleaning Of Strainer , Servicing Of Gate Valve 4Inch , Concentric Reducer Servicing , Servicing Of Gate Valve 12Inch , Servicing Double Hydrant Point Greasing Total Quantity : 10459

BRR:8440696 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Comprehensive Annual Maintenance Contract Of Cctv Cameras And Accesories; CCTV IP Camera NVR Cable Hard Disk LED Display Other Accessories

BRR:8440559 Bids Are invited for Tab Ranitidine 150 Mg - Tab , Tab Baclofen 5 Mg - Tab , Tab Salbutamol 4 Mg - Tab , Tab Pentoxyfylline 400 Mg - Tab , Tab Alfuzosin 10 Mg - Tab , Tab Atorvastatin 5Mg - Tab , Tab Spiranolactone 50Mg - Tab , Tab Hydroxyzine 10 Mg - Tab , Tab Losartan H 50 And 12 Point 5Mg - Tab Total Quantity : 38600

BRR:8440538 Bids Are Invited For Commercial Ply wood 12mm thick 8x4 Feet Long Make Century Green Ply Kitply ArchidPly , Ply wood commercial 6mm thick 8x4 Feet Make Century Green Ply Kitply ArchidPly , Plain Glass 3 mm thick Best Quality ISI Mark , Looking mirror 600 x 450 MM without frame Best Quality ISI Mark Modiguard , Hydraulic door closer No 2 Heavy duty RM-1000 Make Crown Harrison , Tower bolt Alum 150 mm long Make Classic Crown Best Quality ISI Mark , Alu Aldrop bolt Sliding Bolt MS 300 MM 12 Inch Best Quality ISI Mark , Screw Steel 50 x 8 mm Best Quality , Screw Steel 25 mm Best Quality , Screw Steel 75 x 8 mm Best Quality , Alu butt hinges 125 MM Best Quality , Alu butt hinges 100 MM Best Quality , Fevicol 1 kg , GI Nails 1 Inch 25 mm 500 grms Best Quality , Bow handle 100 mm Alum Best Quality ISI Mark , GI Nails 3 by 4 Inch 20MM Best Quality , GI Nails 2 Best Quality , PVC rawl plug 100 nos pkt Best Quality , Window glass panes ordinary 3 mm thick , Wooden beading of size 10x6 mm Best Quality , Wooden beading of size 20x20 Best Quality , GI Wire binding Best Quality , Aluminum door stopper 100mm Best Quality , Bow handle 150 mm MS Alum , GI Screw 20 mm 25mm 35mm 50mm Best Quality ISI Mark , Hasp and stapple 100 mm , Hasp and stapple 75 mm Best Quality ISI Mark , GI Nail 1 1 By 2 Best Quality , SS wire mess 0 Point 36 mm nominal dia of wire and average width of aperature 1 Point 40mm 15 Mtr roll , Ply wood commercial 4mm thick 8x4 Long Make Century Green Ply Kitply ArchidPly , Screw Steel 15 mm Best Quality ISI Mark , Putty 1 kg pkt Birla snowcem , Aluminum sheet plain width 1 Point 00 M 24 G Best Quality ISI Mark , Super flush strip 100 mm wide 10 mtr long Best Quality ISI Mark , PVC Mirror cabinet for Bathroom Make Prayag Shakti Jainco 450x350mm , Glass self with CP Brass realing Corner self 300mm Best Quality ISI Mark Prayag , GI Pipe 15 mm Make Jindal TATA Nippon , Hack saw blade 25mm x300mm Best Quality ISI Mark Hira , CP Stop Cock Male external thered 20 mm Make Prayag Shakti Jainco , Reducing Tee 1 X 3 BY 4 INCH 25 x 25 x 20mm ISI Mark Unik , GI tee equal 1 Inch 25MM ISI Mark , GI elbow 15mm ISI Mark , GI Bend 15mm Make ISI Mark , GI socket 15mm ISI Mark , GI Nipple 1 By 2 Inch x 1 Inch long 15 MM x 25 MM ISI Mark , GI Plug 15 mm Make ISI Mark , GI union 3 By 4 20 MM dia ISI Mark , GI Nipple 1 By 2 INCH x 4 INCH long 15 MM x 100 MM ISI Mark , GI union 1 Inch 25 MM ISI Mark , GI Nipple 1 By 2 x 3 long 15 MM x 75 MM ISI Mark , GI Nipple 1 By 2 Inch x 6 Inch long 15 MM x 150 MM ISI Mark , GI union 1 By 2 INCH 15 MM ISI Mark , GI Reducing socket 3 By 4 Inch x 1 By 2 Inch ISI Mark , GI Nipple 1 By 2 Inch x 2Inch long 15 MM x 50 MM , GI tee equal 1 By 2 Inch 15 mm ISI Mark , GI reducer 1Inchx3 By 4 Inch 25 x20 mm ISI Mark , GI plug 25 mm ISI Mark , GI Plug 20 mm ISI Mark , GI tee equal 3 By 4 Inch 20MM ISI Mark , PVC grating 100x100mm Make Prayag By Shakti , PVC lid for 1000 ltrs capacity Best Quality ISI Mark , PVC lid for 500 ltrs capacity Best Quality ISI Mark , M seal 200 gms pkt , GI Nipple 25mm x 2Inch long Best quality , Brass jumper washer for 15 mm bib tap Best Quality ISI Mark , GI Socket 1 By 2 Inch ISI Mark , GI Socket 3 By 4Inch 20MM ISI Mark , GI Socket 1Inch 25 MM ISI Mark , GI bend 20mm ISI Mark , GI Nipple 25mm x 3Inch long ISI mark , GI Nipple 3 By 4Inch x 2Inch long ISI Mark , GI Tubing 20 mm dia Make Jindal By HB ISI Mark , GI Tubing 25 mm dia Make Jindal By HB ISI Mark , GI Hook for pipeline Best quality , GI Bend 25 mm Make Jindal By HB ISI Mark , GI Check Nut 20mm ISI Mark , GI Check Nut 25mm ISI Mark , GI elbow 1 By 2 Inch ISI Mark , GI elbow 1 By 2 Inch 20MM ISI Mark , CP Bottle trap for WHB 32 mm dia Make Prayag By Shakti , Looking mirror 600 x 450 mm with frame Make Prayag By Modiguard , Reducing socket 1Inch x 1 By 2 Inch 20 x 25 mm ISI Mark , White cement 1 Kg Best Quality , Pad Lock 6 lever Link Total Quantity : 20

BRR:8440535 Bids Are Invited For 0 Point 2 Percentage Chlorhexidine Mouth Wash Bott Of 80 Ml , Ketac Molar Restorative Glass Ionomer Cement With High Flexural Strength Pkt Contains 1 Powder 1 Liquid 1 Mixing Pad And 1 Plastic Scoop , Gum Paint Contains Tannic Acid Glycerine 27 Percentage Ww Potassium Iodide Ip 0 Point 05 Percentage Ww Iodine Ip , Bur Diamond Straight Fissure Sf 13 , Absorbent Cotton Roll Pkt Of 500 , Inj Lignocaine 2 Percentage With Adrenaline 1 Is To 80000 Bott Of 30 Ml , Inj Lignocaine Hcl Without Adrenaline Contains Lignocaine Hydrochloride Ip 20 Mg Methylparaben Ip 0 Point 1 Percentage Wv , Betadine Povidone Iodine Solution Ip 5 Percentage Wv 500Ml , Mucopain Gel Contains Benzocaine Ip 20 Percentage Ww In Water Miscible Base Tube Of 15 G , Patient Drape Plastic Reusable , Savlon Antiseptic Disinfectant Liquid Bott 100Ml , Desensitizing Tooth Paste Tube Of 50G With Potassium Nitrate 5 Percentage Ww Sodium Monofluorophosphate Usp , Bur Diamond Inverted Cone Si 47 , Bur Diamond Tapered Fissure Tf 43 , Bur Diamond Round Br 40 , Edta Gel With 10 Percentage Carbamide Peroxide Edta Gel For Root Canals Syringe Of 2G With Applicator Tips , Nitrile Gloves Medium Pkt Of 100 , Sterillium Hand Sanitizer Contains 2 Proponol Ip 1 Proponol Ethyl Hexadecyl Dimethyl Ammonium Ethylsulphate Bott Of 500 Ml , Dental Floss With Grip Handle 50 Pcs In Box Total Quantity : 856

BRR:8440514 Bids Are Invited For Camera For Cctv System (V3) , Networking / Server Rack , Video Recorder For Cctv System (V2) Total Quantity : 49

BRR:8440491 Bids Are Invited For Pa Electron System Total Quantity : 1

BRR:8440456 Bids Are Invited For Label Printer / Barcode Printer (Q2) Total Quantity : 12

BRR:8440437 Bids Are invited for Brake Shoe Rear - Brake Shoe Rear For Maruti Gyp 413W Mpfi , Clutch Fan Assy - Clutch Fan Assy For Maruti Gyp 413W Mpfi , Suspension Bush Kit - Suspension Bush Kit For Mg , Hose Pipe Upper Tank To Thermostat - Hose Pipe Upper Tank To Thermostat For Mg , Knuckle Bearing - Knuckle Bearing For Maruti Gyp 413W Mpfi , Side Indicator - Side Indicator Assy For Tata 2 Point 5 Ton 713 32 Tc , Door Side Cover - Door Side Cover Als 5 Oblique 7 Point 5 Ton Bs Ii , Hazard Switch - Hazard Switch For Als 5 Oblique 7 Point 5 Ton Bs Iii , Horn Relay 24V - Horn Relay 24V Als , Belt Tensioner Assy - Belt Tensioner Assy For Tata 2 Point 5 Ton 713 32 Tc , Clutch Cyl Assy New Model - Clutch Cyl Assy New Model Truck Fire Fighting Mk Iv Total Quantity : 24

BRR:8440393 Bids Are invited for Metric Tool Kit For Automotive Use 132 Pcs , Taparia Socket Set As46 , Welding Rod Electrodes 5 Kgs Ador E6013 , Welding Rod 2 Point 5 Kgs Sparc E6013 , Cutting Blade 4 Inch 60 Pcs , Cutting Blade X3 Series 5 Inch 60 Pcs , Cutting Blade 14 Inch , Chiesel Taparia Big , Chiesel Taparia Small , Welding Holder Total Quantity : 21

BRR:8440334 Bids Are Invited For Connector Type Rj-45 , 16 Channels Nvr With 10 Tb Ssd Hard Disk , Cctv Feed Display Device 65 Inch 4K Uhd Led , Ups 1 Kva With 15 Min Backup , Online Ups 2 Kva With 30 Min Backup , L2 Switch24 Port Poe , L2 Switch 8 Port Poe , 6 U Wall Mount Rack , Electrical Extension Box 16 Amp , 4 Core Unarmored Optical Fiber Cable , Splicing Enclosure For Optical Fiber , O To E Media Converters , 120W Led Lights , Fiber Optic Patch Cord Sc To Sc , Installation And Commissioning Of Surveillance And Detection System , Camera For Cctv System (V3) , Cat - 6 Utp Ethernet Cable For Wifi Indoor Use (Mtnl) , Pvc Insulated Copper Cable Single And Multi - Core Circular Sheathed Cable With Flexible Conductor (V2) As Per Is 694 Total Quantity : 6473

BRR:8440291 Bids Are Invited For Copper Alloy Taps/Stop Valves (V2) Conforming To Is 8931 , Sinks , Bathroom Water Shower (V2) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming To Is 12701 , Curtain Pipe, Sider And Mounting Bracket , Prelaminated Particle Boards From Wood And Other Lignocellulosic Material (V2) As Per Is 12823 , Hydraulically Regulated Door Closers , Ss Wire Cloth 0 Point 36Mm Dia Wire 0 Point 9Mm Wide X 15M Long , Ss Wire Cloth 0 Point 36Mm Dia Wire 1 Point 2M Wide X 15M Long , Hdpe 40Mm Pvc Pipe , Cushion For Couch Long Piece , 3Mm Thick App Membrane , Door Handle Aluminium 100Mm , Curtain Rod Bracket Decoralive Type 25Mm , Cushion For Sofa Set Fd 281 , Hat And Coat Hooks , Door Handle Aluminium 150Mm , Aluminium Floor Door Stopper With Rubber Shoe , Wooden Glass Beading , Bitumen Strip 50Mm Wide X 5Mtr Long , Pvc Gully , Taflon Tape , Gl Screw Wood 8X25 Mm , Gl Screw Wood 8X40 Mm , Gi Clamp For 20 Mm Gi Pipe , Gl Screw Wood 6X20 Mm , Gi Clamp For 15 Mm Gi Pipe , Silicone Tape , Gi Long Scew 20Mm X150mm , Taflon Tape 10 Mtrs Length 1 By 4 Inch Width , Gl Check Nut Of Size 20Mm , Fevicol , Gi Check Nut Of Size 15Mm , Ms Hook 20Mm Dia , Gl Screw Wood 8X75 Mm , Gi Long Scew 15Mm X150mm , Gl Screw Wood 8X30 Mm , Ms Bow Handle 125Mm Total Quantity : 2305

BRR:8440289 Bids Are Invited For Wire mesh Stainless Steel of size 1 point 2 x 15 Mtr with 0 point 56mmx1 point 18mm appartus , Cushion cover made out of superior quality tapestry cloth rate not less Rs 350 , Mirror for hat Stand 300x440x5mm , Teak wooden scantling of size 7x4x100 cm for sofa , Teak wooden scantling of size 7x 5x200 cm for bed , Teak wooden scantling of size 6x3x90 cm for chair , Teak wooden scantling of size 6x6x80 cm , Teak wooden scantling of size 5x3x60 cm for peg table , Wheel base for revolving chairs , Door seal with aluminium frame 3 feet long , Beading Teak 20 mm , Peg set for hat stand Brass , CP handle for steel almirah by locker , Lock for steel almirah by locker , Beading PVC 25 mm , Teak wooden scantling of size 6x6x200 cm for bed , Teak wooden scantling of size 3x2x200 cm for bed , Teak woocen scantling of size 4x6x80 cm , Fevicol SR by SH , Hydraulic system for revolving chairs , Bracket for PVC L by L Flushing Cistern , French polish Make Shalimar , Screw 15mm 100 Nos in each pkt , Door Handle Alum 150 mm , Telescopic channel for table computer keyboard 12 inches , Telescopic channel for table computer drawers 16 inches , MS Bracket for curtain rod 19 by 20mm and 1 mm thick , Wooden Beading Teak Wood 25 mmx 25 mm , Wood French Polish , Beading PVC 20mm , Beading PVC 25mm , Door Handle alum 100 mm , Back frame Chair CB steel With Arms , PVC Bullets 50mm Contains in 300 Nos in each pkt , PVC Bullets 35mm Contains in 300 Nos in each pkt , Castor wheel for revolving chairs push type , Castor wheel for revolving chairs thread type , Washer for PVC L by L flushing Cistern , Screw full thread 35 mm , Screw full thread 25 mm , Cap hook brass 100 mm , Screw wood SS 35mm , Screw wood SS 40mm , Window wire mesh Nut and Bolt , Wood primer Berger , GI Long Screw 20 mm X 75 mm , shoe for chair , Rubber washer for Syphone , Plywood for General Purposes Marked to IS 303 (V3) Total Quantity :

BRR:8440203 Bids Are Invited For Repair Of Button Camera With High Resolution Dvr , Repair Of Camera In Wrist Watch , Repair Of High Resolution Portable Dvr Hidden In Mobile Phone , Repair Of Camera Hidden In Key Ring , Repair Of Digital Voice Recorder , Repair Of Long Distance Room Transmitter , Repair Of Rf Bug Detector Protect 1206I , Repair Of Metal Door Detector , Repair Of Right Foldable Gps Fpv Drone , Repair Of Mobile Phone Jammer For 2G 3G 4G And Wifi , Repair Of Digital Camera Total Quantity : 23

BRR:8440186 Bids Are Invited For Custom Bid For Services - Hiring Of Stage Banners, Standies, Pa System, And Decoration For Independence Day Event At Conference Hall At Icgs Okha.

BRR:8440159 Bids Are invited for Defibrillator Rechargeble Battery Lithium 15 Point 1V 5600 Mah - Defibrillator Machine , Defibrillator Pads - Defibrillator Machine , Power Supply Adaptor 12V 2 Amp - Defibrillator Machine , Power Supply Adaptor 9V 2 Amp - Defibrillator Machine , Bulb 6 V 10 W Phillips - Defibrillator Machine Total Quantity : 5

BRR:8440143 Bids Are invited for External Dvd Writer , External Dvd Writer Cover , Usb Blocker , Multifunction Colour Printer , Single Function Colour Printer , Internal Dvd Writer , High Speed Usb 3 Point 1 To R145 Adoptor , Power Swich Board 4 X4 Plug , 8K High Speed Hdmi Cable 10 Mtr , Ultra Hd 4K 1X4 Hdmi Spliter , Epson L15180 Repair , Epson L18050 Repair , Mouse Pad , Logitech Wireless Keyboard And Mouse , Hw Hi Compatible Battery Total Quantity : 287

BRR:8439919 Tender For Urgent Electrical Maintenance Works At Kvasu Pookode - Providing Exhaust fans in finance office -Electrical 2 1.8.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano typeswitch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copperconductor single core cable etc asrequired.Group A 3 1.23.1 Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch. 4 1.21.1Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20mm 5 2.10.2Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 6 od6942/2025_2026Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 crore round copper conductor flex wire conforming to relevant ISS - 450 mm, single phase, heavy duty, 900 rpm exhaust fan in metal frame, including wiring and dismantling existing ventilator in the wall for exhaust fixation etc complete 7 1.7.2 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire 8 90.10.1.2Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box onsurface 9 1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 10 1.7.1:Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X1.5 sq. mm earth wire 11 od10525/2025_2026:Supply and installation of PVC Junction box 20 mm dia 12 od10526/2025_2026:Labour charge for glasscutting 13 Appendix A1: Providing Exhaust fans in finance office -Civil 14 9.48.1: Providing and fixing M.S Grills of required pattern in frames of windows etc.with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding 15 Appendix B: Electrical maintenance work at the Power Station and provision of spacers on distribution lines 16 OD139595/2025-2026:Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel. making connections. etc. as required. 250 Amp, 25 KA,TPN MCCB 17 OD148681/2025-2026:supply , drawing and fixing of LT stay wire of material - GI , and 1 nos of stay/ anchor rod with stay plate, and 1 nos of stay insulator for stay wire etc including all other accessories 18 OD148682/2025-2026:supply of 32A porcelain fuse unit 19 OD148683/2025-2026:supplying of 63 A porcelain fuse unit 20 OD148707/2025-2026:Supply, erection, testing and fixing of porcelain LT pin insulator with all accessories 21 OD148708/2025-2026:Supply, erection, testing and fixing of porcelain LT shackle insulator 22 OD148709/2025-2026:Supply, erection, testing and commissioning of LT pin for insulator 23 OD148748/2025-2026:supply of LT pin for insulator 24 OD148749/2025-2026:supply of porcelain LT pin insulator 25 OD148750/2025-2026:supply of porcelain LT shackle 26 OD148764/2025-2026:labor charge for maintenance work on the pole near farm - cross arm maintenance 27 OD148767/2025-2026:Engaging Electrician 28 OD148923/2025-2026:supply and fixing of 2 Line PVC/fiber spacer 29 OD148924/2025-2026:supply and fixing of 4 line PVC/fiber spacer 30 OD154179/2025-2026:engaging crane for fixing , installation of 2 line and 4 line spacer in the distribution lines in the campus . to avoiding the tree branches touching issues. 31 Appendix B1: Electrical maintenance work at the Power Station and provision of spacers on distribution lines -pole fixing 32 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds ofsoil 33 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 34 4.1.3A:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) 35 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 36 Appendix C: Electrical maintenance work at All Farms and Pump House -PUMP HOUSE 37 OD158411/2025-2026:supply and installation of 63A Switch fuse unit with side handle model. Sindex or metal box- 3 pole, three phase 38 OD158414/2025-2026:supply and installation of 30A ammeter of 4 inch display- (removing existing ammeter ) 39 OD158417/2025-2026:supply and installation of 600V 4 inch display (removing existing voltmeter ) 40 Appendix C1: Electrical maintenance work at All Farms and Pump House -ALL FARMS 41 OD157054/2025-2026:supply and installation of 32A Switch fuse unit with side handle model. Sindex or metal box- 2 pole 42 OD158319/2025-2026:supply and fixing of 20W LED tube with all fittings. PWD approved brands 43 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 44 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 45 90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 46 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 47 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) 48 1.27.6:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm) 49 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B 50 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 51 1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A 52 2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts C curve DP MCB complete with connections, testing and commissioning etc. as required. 53 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 54 1.28.1:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module 55 OD224232/2025-2026:supplying and fixing 20A DP modular switch on the existing modular box for the control of AC units 56 Appendix D:Replacement and Repair of Electrical Fixtures and Panel Board items inKabani Auditorium 57 OD237160/2025-2026:Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200mm sweep -1 star rated ceiling fan complete with 300 mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C.CG or equivalent approved brands 58 OD237303/2025-2026:Supply and fixing of 20W LED tube with all fittings. PWD approved brands 59 OD237326/2025-2026:supplying, fixing and testing of 36W, 2F*2F LED panel light with driver circuit.Make: Philips/CG/or other equivalent brands approved by Engineer in charge. 60 90.15.4.7:Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 61 OD237369/2025-2026:Supplying, fixing and testing of 3W/5W ceiling mounted round shape light of 5 inch size. Make: Philips/or equivalent approved brand by Engineer in Charge 62 OD237377/2025-2026:Supplying, fixing and testing of 7W,pin type,warm LED bulb .Make: Philips or other equivalent approved brands by Engineer in Charge 63 OD237406/2025-2026:Supplying, fixing and testing of LED Modular Foot Light 3 Modular White. make: Legrand Myrius or any other equivalent brands approved by Engineer in charge. 64 OD237409/2025-2026:Supplying, fixing and testing of 3W warm LED spot lamp .Make: Philips/or other equivalent brands approved by Engineer in charge. 65 OD237413/2025-2026:Supplying, fixing and testing of 9W LED bulb cool white with all fittings. Make: Philips/CG/or other equivalent brands approved by Engineer in charge. 66 OD237435/2025-2026:Supplying, fixing and testing of 1500 mAH, model no: ICR 18650,R-411B5402 rechargeable battery with all accessories of approved brands. 67 OD237951/2025-2026:Supplying, fixing and testing of 8 inch*8 inch square LED ceiling light with all fittings.Make: Philips or other equivalent brands approved by Engineer in charge. 68 OD237967/2025-2026:Supplying, fixing and testing of EXIT sign board green LED of 6*12 inch with battery back up input voltage 230V with all fittings.Any PWD approved brand as per the direction of Engineer in Charge. 69 OD241360/2025-2026:Supply and fixing of 400 kVA-Indoor, outdoor transformer Breather Gel set with all fittings. Make: Approved brands as per the direction of Engineer in Charge. 70 Appendix D1:Replacement and Repair of Electrical Fixtures and Panel Board items inHighmast Light 71 OD237974/2025-2026:Supplying, fixing and testing of 110-240V, 50/60Hz, 20A,1 C/O,16A (N O)and 5A (NC) Digital Timer (GIC) with all accessories. Make : PWD approved brands as per the direction of Engineer in Charge 72 OD237977/2025-2026:Supplying, fixing and testing of 150W LED High mast Light. Make: Philips/CG/or other equivalent brands approved by Engineer in charge. 73 OD237981/2025-2026:Supplying, fixing and testing of 3 pole, 600V, 25A MNX A2 contactor with all accessories. Make: L&T or other equivalent brands approved by Engineer in charge. 74 OD240618/2025-2026:Supply and fixing of 230V AC/DC 22mm plastic corded Electric LED Panel Light Indicator with all fittings.Make: Any approved brand as per the direction of Engineer in Charge. 75 Appendix D2:Replacement and Repair of Electrical Fixtures and Panel Board items in VC cabin 76 OD238292/2025-2026:Supplying, fixing and commissioning of 2 Ton split type AC. Specifications:Cooling capacity: 2 TR Class (24000 BTU/hr +/- 10%). Type of compressor: Rotary. Refrigerant: R32 or equivalent with GWP not more than 675. BEE Star rating: 5 (As per prevailing BEE star rating on date of procurement). Control: Wireless battery operated remote having LCD/LED display and provision for control of fan speed (minimum 3 speeds), temperature, swing, sleep mode with ON/OFF timer etc.Air filtration: PM 2.5 or better Demountable washable dust filter (preferably with add-on filters like Ion/Carbon/UV etc.).Power Supply: 230V, 50 Hz, single phase. Vendor should supply suitable rating external voltage stabilizer even if the AC is capable of operating with wide voltage range etc...Make: PWD approved any brands as directed by Engineer in Charge. 77 OD238341/2025-2026:Supplying, fixing and commissioning of 1.5 Ton Split type AC. Specifications: Nominal Marketing Capacity As Per BEE Star Rating Label (Hint: 1 Ton = 3000 Kcal::Hr, Tolerance +::- 10%) (In Ton). Technology Of Air Conditioner Inverter AC ? Variable speed. Unit Mounting Arrangement Indoor Unit - Wall Mount Type. Rated Voltage (In Volts) 230 V, 1 Phase, 50 Hz, AC.Availability Of BIS::Isi Mark Certification. Material Of Evaporator Copper 12 Material Of Condenser Copper. Make: PWD approved brand as per the direction of Engineer in Charge. 78 OD242709/2025-2026:Supplying, fixing and testing of Automatic Line Voltage Stabilizer for 2 Ton Split type AC. Specification:Product ISI Marked : YES. Rated KVA (in KVA) : 5. Input voltage range : Single Phase Sine wave (90V-300V). Output voltage range : Single Phase sine wave (210V - 250V). Material of winding :Aluminium .Warranty period (in Months):12 79 OD242717/2025-2026:Supplying,fixing and testing of Automatic voltage stabilizer for 1.5 Ton Split type Air Conditioner. Specifications:Product ISI Marked YESRated KVA (in KVA) : 5. Input voltage range Single Phase Sine wave (90V-300V).Output voltage range : Single Phase sine wave (200V - 240V). Material of winding : AluminiumWarranty period (in Months) : 12. Make: PWD approved brands Please Enable Macros to View BoQ information

BRR:8439529 SPECIAL REPAIR WKS IN BLDG NO. BTS/65 AT OR LIVING AT 223 FD, SPL REPAIR TO BLDG NO B/TS/82 & B/TS/73 AT 223 FD REGT AND PROVN OF GUARD ROOM FOR 2/9 GR UNDER GE 859 EWS.; 1 Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil. 2 Excavation insoft/loose soil trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out incl old U/s cable cover of any type , taking out/laying/cleaning/repairing of CI/GI pipe line, cable etcincluding making good to disturbed surfacescomplete all as specified and directed. 3 Returning, filling in & including spreading, levelling& well ramming in layers not exceeding 25 cm thick as in soft/loose soil complete all as specified and directed. 4 Removal of surplus soil to a distance not exceeding 50 mtr depositing where directed at a level not exceeding 1.5 mtr above ground levelcomplete all as specified and directed. 5 M&L for Hardcore of gauge n exc. 63 mm, with broken stone/ boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed 6 M&L for cement concrete type D-2, 1:4:8in Cement concrete (40 mm graded aggregate ) in foundations, filling and mass concrete. 7 M&L for Cement concrete type B-2, 1:2:4 (using 40mm graded agg) as in surface channels and drains complete all as specified and directed. 8 Material and labour for providing cement concrete 1:2:4 type C-2 using 40mm graded aggregate ) in plinth walls or retaining walls,drain walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) 9 M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. 10 M&L for RCC Nominal Mix type B-1, 1:2:4 (using 20mm graded stone agg) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. 11 M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed. 12 M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) as in Columns, pillars, piers, posts and struts complete all as specified and directed 13 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc 14 Supply only of Liquid water proofing compound for exteenal plastering complete all as specified and directed 15 Use & Waste of flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed 16 Use & Waste of flatFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. 17 Use & Waste of flat Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed complete all as specified and directed 18 M& L for cleansawn Second class hard-wood scantlings with framed work. 19 Material & labour for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area not exc. 3 sqcm complete all as specified and directed 20 S&F 2nd class Hard woodPlain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. 21 S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats. 22 S&F2nd class HW 30mm thick Glazed and skeleton shutters,divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats. 23 S& F for 30mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. 24 S&F 125 mm longaluminium anodized, barrel tower bolts extruded section. 25 S&F 150 mm longaluminium anodized, barrel tower bolts extruded section. 26 S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. 27 S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed. 28 S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. 29 S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width ofaperture 1.18mm and fixed with tinned tacks, or galvanised wire staples 30 S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 31 Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. 32 Ditto, itm no 43, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders 33 M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming toIS 1161- 1979 grade St.-240 34 S&F 4mm Non Asbestos fibre cement bldg boards fixed or laid/inserted to GI/Aluminium framework with screws designer type as in false ceiling with & incl aluminium snap grid of size and fixed with hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia ,40mm long complete all as specified with allconnected accessories, fittings and fixtures complete all as specified and directed. 35 Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed. 36 Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80mm thickness (minimum 275gm/sqm galvanising)complete all as specified and directed. 37 S& F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colourhaving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecifie 38 Pre- painted galvalume aluminum zinc coating GI based plaincorrugated steel sheet 0.50mm thick of an colourhaving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecifie 39 Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls surface etc complete all as specified and directed. 40 Supply and fixed 4 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. 41 M&L for 75mm thick Pcc type C-2, 1:3:6 (using 40mm graded stone agg) as in plinth protection complete all as specified and directed. 42 M&L for PCC 100mm thick, type D-2, 1:4:8 (using 40mm graded stone agg) infloors and pavings etc. complete all as specified and directed 43 M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note: colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge). 44 M&L for vitrified ceramic tiles 9 to 10 mm thick dark shade tiles (square/rectangular) area of each tile exceeding 0.36sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 45 Dismantling floor , hearth or wall tiling including cement mortarbedding (but not backing ), removing serviceable tiles to store and rubbish off the premises all as specified and directed. 46 M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified. 47 Material and labour for 10mm thick rendering in cement mortor(1:4) on brick or concrete walls surfaces finished rough as backing coat for receiving tiles complete all as specified and directed. 48 M&L rendering 10 mm thick in CM 1:6on concrete inner surfaces of wallfinished even and smooth without using extra cement . 49 M&L rendering mixed with liquid wpc by 0.4% of cement weight 15mm thick in CM 1:4on concrete outer surfaces finished even and smooth without using extra cement . 50 M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:6 for laying floor tiles etc all as specified. 51 Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified. 52 M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over Primimg coat complete all as specified and directed by engr in charge 53 Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. 54 Hacking out old broken glass (glass thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed. 55 Material and labour fornewplywood and wood based materialsurfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation complete all as specified and directed. 56 M&L for preparation of new steel Surfaces of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer when unconnected with other painting or when painted in a different tin 57 Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. 58 Material and labour for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of anticorrosive roof paint over a coat of red oxide primer over 10 cm width or girth on steel surface . 59 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. 60 Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. over 40 sq cm on over in section , in any position all as specified and directed. 61 Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed 62 Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. 63 Use and waste flat form work to vertical faces of drain/retaining wall and similar work . 64 Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed. 65 Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc 1.50 Sqm each including iron mongeries complete all as specified and directed. 66 Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. 67 Supply & fix Aluminium anodisedbarrel tower bolt 100 mm long of extruded section etc complete all as specified and directed. 68 Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. 69 Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy andfixed etc complete all as specified and directed. 70 Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed. 71 Supply and fix MS butt hinges medium weight, cold rolled 75mm size complete all as specified and directed. 72 Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed. 73 Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. 74 High density polyethylene pipes (HDPE) 50 Sqmm bore of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. 75 Supplying and fixing 1100 volts grade 16 Sqmm heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular. 76 Supply and laying or fixing or passing through pipeXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 25 sqmm 2 core including taking out old unserviceable cable any type complete all as specified and directed by Engineer in charge. 77 Supply and fixing LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including taking down old unserviceable light fitting any type complete with IP 65/66 protection complete. 78 Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings suchasswitches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. 79 M/L for point wiring in casing caping with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl casing caping with its accessories and PVC Boxes for fixing switches/sockets etc for One light/fan point controlled by one No piano type switch5 Amps single pole one way 80 One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board. 81 One socket outlet 5/3 pin 6 AMPS controlled by one switch onindependent board. 82 S&F Switch Piano Flush button single pole one way 5/6 Amp. 83 S&F Switch Piano Flush button single pole one way 15/16 Amp. 84 S&F socket outlet 2 in 1 ,3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt. 85 S&F socket outlet 2 in 1,3 pin & 2 pin, 5/6 Amp, 240 volt. 86 S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) typeincluding taking down old Distribution Board and MCBs all as specified and directed . 87 S&F ceiling rose surfacebakelite 65mmx50mm 100watt three terminal. 88 All as per item No 79 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor. 89 Supply and fixing LED lights fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fitting complete. 90 Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm diaby means of bolts, nuts, check nuts and washers ofgalvanizediron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC(1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduitgrouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completionincluding taking out old unserviceable eathing complete all as specified and as directed. 91 M&L for sub mainwiring with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including PVC Casing caping including 6.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly Including taking down old unserviceable sub main wiring and making good of existing surface.Note:-(i)One run of PVC Casing caping, two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit. 92 S&F MCB SP 5 to 32 Amps 240 volts C series, 10 KA, 50 Hz including connection in the DB and testing/commissioning.Make:- As approved Make of DB 93 S&F MCB SPN 40 Amps 240 volts C series, 10 KA, 50 Hz.Make:- As approved Make of DB

BRR:8439507 Tender For Provision Of Utensils Washing Point Near Cook House At Bldg No T-14-18 With Overhead Water Tank In B Zone And Special Repairs To Bldg No T-48 And T-49 In A Zone At Rms.

BRR:8439461 Tender For Provision Of Covered Passage Between Patient Waiting Area And X-Ray Area (Cbct Room) And Other Sanction Work Under Ge Panagarh; 1 Excavating in post holes ( or similar holes) each n.exc 0.5 cum getting out and removing surplus soil to a distance n.exc 50m and making good surface, in soft/loose soil complete all as specified and as directed. 2 M & L for PCC type C2 1:3:6 using 40 mm graded crushed stone aggregates as in foundations ,fillings and mass concrete complete all as specified and as directed. 3 S & F Roof trusses (framed) of angle iron members trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed. 4 S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed. 5 M&L for preparing of new steel & ironsurfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. 6 M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measurescomplete all as specified and directed. 7 M & L forpre-paintedhot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specifiedany heightMtr height including all necessary scaffolding and safety measurescomplete all as specified and directed. 8 S & F wind ties for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) includingall necessary drilling or riveting etc and similar work conforming to Fe 410-O or Fe-310-O, complete all as specified and directed 9 Supply & fixing in repairs of Automatic Street Light Control Switch using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required Illuminance Level for Switching ON is ≤ 60 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs to max. 12 hrs.The Circuit should be suitable enough to take Three-Phase load of 25-30kW comparising of 3 nos. Contactors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 63 Amps each and Circuit wiring (Copper) of min.10 sq.mm. The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Rust Proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure (with HINGED LID) conforming to IP66 protection class 2 The circuit should also have provision foranual Operation (i.e. Sensor By-Pass option). 10 Supply & fixing in repairs of Automatic Street Light Control Switch using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required Illuminance Level for Switching ON is ≤ 60 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs to max. 12 hrs.The Circuit should be suitable enough to take Three-Phase load of 18-21kW comparising of 3 nos. Contactors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 40 Amps each and Circuit wiring (Copper) of min.10 sq.mm. The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Rust Proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure (with HINGED LID) conforming to IP66 protection class 2 The circuit should also have provision foranual Operation (i.e. Sensor By-Pass option). 11 Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use, complete all as specified and as directed. 12 Supply, Laying and testing cableLT XLPE sheathed,PVC insulated screened PVC bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade, laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc of 4 core 10 sqmm complete all as specified and as directed. 13 Supply, Laying and testing cableLT XLPE sheathed,PVC insulated screened PVC bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade, laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc of 4 core 16 sqmm complete all as specified and as directed. 14 Supply, Laying and testing cableLT XLPE sheathed,PVC insulated screened PVC bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade, laid in trenches/surface of wall/in GI pipe along with pole for connection to OH lines,including brass cable glands,clamps,etc of 4 core 25 sqmm complete all as specified and as directed. 15 Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soil complete all as specified and as directed. Note : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding. 16 Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 250mm in Soft/Loose Soil, complete all as specified and as directed. 17 Removing excavated Materials (Soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the Starting Point in Soil, complete all as specified and as directed. 18 M&L Sand Cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (NOTE : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid) complete all as specified and as directed. 19 Supply and laying well burnt Bricks , locally available best quality (sub class B bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified. 20 Supply and fixing/laying40mm bore, steel tubings,galvanised, light grade with all fitting laid across road , in trenches or across PCC drain oralong electric pole or floor/wall etcfor protection of cablecomplete all as specified and as directed. 21 M&L for PCC 1:2:4type B1 (using 20 mm graded crushed stoneaggregate) as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and as directed. 22 S & F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed . 23 M&L for earthing complete with galvanised steel earth plate electrodesize 600 x 600 x 6 mm thick, burried directly in ground, (Earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised iron strip 32 x 6 mm as earthin lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion, surrounded from all sides by mixture of charcoal and common salt and electrode by means of steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specifiedNOTES 1. The unit rate includes for protection pipe and GI strip dia from top of earth plate upto 7.5 meter above ground level. NOTE:-1. The unit rate includes for protection GI pipe of 40 mm and watering pipeof 20 mm bore including excavation for earth pit in any type of soil/ disintegrate rock. 2. Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to achieve desired result as the soil resistiviy is very high. 3.The cost ofGI strip of size 32 x 6 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately.4. All the joints in GI strip and connection with Earth Plate to be welded through brazing and in addition by providing double brass nut bolt and washer. 5. Cost ofwelding and nut bolts are deemed to be included in the unit rate.

BRR:8439441 Supply Of Supply Of Complete Insulation Set Of Electric Point Machine.Supply Of Complete Insulation Set Of Electric Point Machine.,Complete Nylon Insulation Set Of Electric Point Machine 220Mm Throw , High Thrust,E Spec No.I Rs-S-40/84 Or One Set Consisting Of (1) Washers As Per Rdso Drg. No. S- 8640- 12 Nos (2) Washers As Per Rdso Drg. No. S- 8640/1- 4 Nos (3) Washers As Per Rdso Drg. No. S- 8640/2- 2 Nos (4) Bush As Per Rdso Drg No.S- 23199- 10 Nos (5) Bush As Per Rdso Drg No.S- 3463- 1 No(6) Bush As Per Rdso Drg No.S- 22179 - 2 Nos (7) Bush As Per Rdso Drg No.S- 8912- 2 Nos (8) Plate As Per Rdso Drg No.S- 3404-02Nos . Make- R Ambal Or Similar. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8439400 Supply Of 110V, Dc Mobile Phone Charging Socket As Per Icf Drg.No. Icf/Sk3-7-6-036 Alt.M Or Latest.110V, Dc Mobile Phone Charging Socket As Per Icf Drg.No. Icf/Sk3-7-6-036 Alt.M Or Latest.,110V, Dc Mobile Phone Charging Socket As Per Icf Drg.No. Icf/Sk3-7-6-036 Alt.M Or Lat Est. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8439328 Supply Of Digital Handhelddigital Handheld,Bosch Corded Brushed Electric Impact Drill Machine 750 Watts (Bosch Gsb 16 Re) [ Warrant Y Period: 12 Months After The Date Of Delivery ] ] , Hss Drill Bit 6.8 Mm [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Digital Handheld Infrared Thermometer (Make: Bosch/Omron/Mextech/Extech/Testo/Flir/Mitutoyo/Htc) Range: -30?C To 500?C, Accuracy: ?1?C, Resolution : 0.5?C, Laser Class Ii (Single-Point), Distance To Spot Ratio: 12:1, Power: 2 ? Aa Alkaline Batteries, Warrant Y: 1 Year [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8439221 Supply Of Manufacturing And Supply Of Cut Head Black Bolts Of Size 18 X 70 Mm To Rdso Drg No. T-11636 Latest Alt If Any, Use For Points & Crossing, Confirming To Irs Specifications Serial No.T-23: 2021 (Redrafted) Or Latest Amendment If Any.Manufacturing And Supply Of Cut Head Black Bolts Of Size 18 X 70 Mm To Rdso Drg No. T-11636 Latest Alt If Any, Use For Points & Crossing, Confirming To Irs Specifications Serial No.T-23: 2021 (Redrafted) Or Latest Amendment If Any.,Manufacturing And Supply Of Cut Head Black Bolts Of Size 18 X 70 Mm To Rdso Drg No. T-11636 Latest Alt If Any, Use For Points & Crossing, C Onfirming To Irs Specifications Serial No.T-23: 2021 (Redrafted) Or Latest Amendment If Any. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8439194 Supply Of Supply And Configuration Of Digital Trans-Receiver Handheld 5 Watt Vhfsupply And Configuration Of Digital Trans-Receiver Handheld 5 Watt Vhf,Supply And Configuration Of Digital Trans-Receiver Handheld 5 Watt Vhf Set Conforming To Clause 5B Of Rdso Specification No. Rdso/Spn/Tc/107/2018 Ver, 2.0 Or Later, Along With Two Set Of Oem Approved Rechargeabl E Batteries Including One As Spare, Additional Requirements: 1) Spot Frequency - 159.650 Mhz & 160.400 Mhz. 2) B Attery Type -Ni Mh Or Li-Ion. 3) Battery Capacity - Minimum 2300 Mah And Should Work For At Least 10 Hours. 4) Two Numbers Of Tuning Kit With Software To Program Shall Be Provided With The Consignment. 5) Spare Antenna For Vhf Set: 10% Of Total Vhf Set Quantity Antenna Shall Be Provided As Spare. 6) Warranty :- Warranty For Radios And Rapid Chargers Shall Be At Least 5 Years And Warranty For Battery Packs Shall Be For At Least 1 Year. Material Should Be Mtc Te Approved Or Certification May Be Given By Participant That Valid Mtcte Certificate Will Be Presented Before Comm Encement Of Deliveries. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Sr.Section Engineer(Tele) Pa, Maharashtra 174.00 Set , Supply And Configuration Of Digital Trans-Receiver Handheld 5 Watt Vhf Set Conforming To Clause 5B Of Rdso Specification No. Rdso/Spn/Tc/107/2018 Ver, 2.0 Or Later, Along With Two Set Of Oem Approved Rechargeabl E Batteries Including One As Spare, Additional Requirements: 1) Spot Frequency - 159.650 Mhz & 160.400 Mhz. 2) B Attery Type -Ni Mh Or Li-Ion. 3) Battery Capacity - Minimum 2300 Mah And Should Work For At Least 10 Hours. 4) Two Numbers Of Tuning Kit With Software To Program Shall Be Provided With The Consignment. 5) Spare Antenna For Vhf Set: 10% Of Total Vhf Set Quantity Antenna Shall Be Provided As Spare. 6) Warranty :- Warranty For Radios And Rapid Chargers Shall Be At Least 5 Years And Warranty For Battery Packs Shall Be For At Least 1 Year. Material Should Be Mtc Te Approved Or Certi

BRR:8439021 Cleaning And Lifting Of Floating And Foreign Materials From Pump Sump Chamber At Ambedkar And Topsia Point A Drainage Pumping Station.

BRR:8438990 Comprehensive Annual Maintenance Contract of Auto Manual Traffic Signalling system under local Police authority at different locations of Nabadiganta Industrial Township Area for the period of one year (365 days) under NDITA which may be extended upto 3(three) years on the basis of satisfactory performance of the said work as per same terms & conditions and item rates.-Annual Maintenance of Auto -Manual Traffic signalling system at the auto manual signal & blinking system to be maintained properly so that th system can be utilized smoothly without any trouble with the following : a) Forthnightly cleaning of signal display head including Lenss ,refector b) Aligning the display head to the Traffic direction.c) Checking the termination point once in a month.d) Replacing the fuse LED lamp as and when required.e) Checking, repairing the signal and blinking control modules as and when required.f) Routine maintenance of signal controller.g) Painting the signaling system complete with Poles once in a year, with proper anti-corrosive paint & enemel paint.Locations:- 1) Nicco Park, 2) Nabojyoti Club, 3) Ring Road/RS Software, 4) Nabadiganta Bhavan, 5) Nabadiganta IDEAL/PANACHE, 6) Techno India University, 7) Bihar Warrior Cut-out, 8) CSTC Garage, 9) 215 Bus Stand, 10) Philips More, 11) MunsefBheriI, 12) Lohapole, 13) KIA Motors and 14) 215 Bus Stand Entrance.14 Nos.point X 12 Months = 168 Points per yearRef: Approved rate of NKDA vide Work Order no. 8758/EE (E)/NKDA/Elect/2022-23 dtd. 12/09/2023 2 The following items are considered in this BOQ for replacement of any damaged/unserviceable accessories in connection with maintenance of the said signalling systems as and when required.Dismentling steel tubular poles in C.C. foundation including excavation, filling of holes, restoring surface, loading at site and delevering, unloading , sorting, stacking properly at any place as per direction upto a lead of 1.6 K.M. 3 Supplyingswagedandweldedsteeltubular poleof following specifications as per IS 2317: 1980) 9m length, 164Kg, 410-SP-33 4 Supply of single arm bracket made of 40mm dia 1.5 meter long 5 Erection of single steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (proportion and dimension indicated below), having 600 x 600 x 150mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 Mts. dia and 0.30 Mts. above ground level including 3mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6km from store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.a) Upto 9.0 mtr. size: 0.6x0.6x1.70 mts. 6 Earthing with 50mm dia GI Pipe 3.64mm thick x 3.04 Mts. Long and 1 x 4 SWG GI (Hot Dip) wire (4Mts. Long) 13mm dia x 80mm long GI bolts, double nuts, double washers including S & F 15mm dia GI pipe protection (1 Mts. Long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the gound level by ISI-Medium GI Pipe. 7 Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil. 8 SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 (i) 10 sqm 4 core 9 Laying of one No. cable upto 35 Sqmm. In underground trench 460mm wide x 760mm average depth. With brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restoring surface duly rammed. 10 Supply and delivery of 50mm dia heavy gauge polythene pipe for mechanical protection of underground cable.Dia - 50mm 11 Supplying and drawing 1.1KV Single Core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necessary connection as required from terminal box at Bottom end to the respective LED fittings.f) 4 x 36/0.3(2.5 sqmm.) 12 Add GST@18% on Sl. No. 1 to 2.10 13 Add labour cess @1% on Sl. No. 1 to 3

BRR:8438977 Design, installation with its electrical connections, testing and commissioning of decorative lighting arrangement on temporary hire basis at the bamboo fencing, small plants, small and medium trees fromstarting point of Link Road (Post Office corner) to end point of Link Road (HIDCO connector) for the Puja Festival (2025), Happy Christmas (2025) & New Year (2026) under NDITA.

BRR:8438959 Tender For Tubewell With Sub - Mersible Pump And Layout Of Pvc Pipeline With Taping Point Near Azad Para Under Booth No- 206 And Ward No-17 Within Haldia Municipality (Apas).

BRR:8438954 Tender for Requrement Of Drinking Water Point At Banachad Primary School , Ward No - 10, Booth No-145, Within Haldibari Minucipality

BRR:8438932 Operation And Guarding Of Drainage Pumping Station Of Dps Point-F At Aa-I Under Ntk Project.- 1 PART-A (For F.Y. 2025-26 from 01.09.2025to31.03.2026) Operation & guarding of the pumping machineries & related electrical equipments on 24 hrs. basis by engaging sufficeent no. (4 nos.) of operating personnel as per direction and upto the entire satisfaction of E.I.Cwith effect from01.09.2025to31.03.2026 2 Supervision charges for electrical / mechanical installation within the pumping station by licensed electrician / mechanic including incidental charges as per specification & direction of E.I.C. with effect from01.09.2025to31.03.2026PART-A Total (SL.1 and 2) for F.Y. 2025-2026 (from 01.09.2025to31.03.2026)= Rs. 645326.25 3 PART-B (For F.Y. 2026-27 from 01.04.2026to31.03.2027)Operation & guarding of the pumping machineries & related electrical equipments on 24 hrs. basis by engaging sufficeent no. (4 nos.) of operating personnel as per direction and upto the entire satisfaction of E.I.Cwith effect from01.04.2026to31.03.2027. 4 Supervision charges for electrical / mechanical installation within the pumping station by licensed electrician / mechanic including incidental charges as per specification & direction of E.I.C. with effect from01.04.2026to31.03.2027. 5 Excess charges to be paid on item no. 1.00 in case of enhancement of wages as will be fixed by the ccompetent authority (Rate will be fixed as minimum wages + Bonus + Contractor Profit + ESI + EPF contribution)PART-B Total (SL. NO 3 TO 5) for F.Y. 2026-2027 (from 01.04.2026to31.03.2027) = Rs. 1181314.790N.B.:- Work should be completed as per attached Terms & Conditions.

BRR:8438931 Operation And Guarding Of 11Kv Sub-Station Of Dps Point-F At Aa-I Under Ntk Project.

BRR:8438868 CONSTRUCTION OF INSPECTION, SEARCH & SEIZER POINT AT GHORDHAPPA IN GOALPOKHER-I BLOCK UNDER UTTAR DINAJPUR ZILLA REGULATED MARKET COMMITTEE

BRR:8438864 CONSTRUCTION OF INSPECTION, SEARCH & SEIZER POINT AT BILASHPUR ALONG WITH AN APPROACH ROAD UNDER UTTAR DINAJPUR ZILLA REGULATED MARKET COMMITTEE

BRR:8438450 Supply Of Hss M 35 Grade Drill Twist Size 3.7Mmhss M 35 Grade Drill Twist Size 3.7Mm,Hss M 35 Grade Drill Twist Size 3.7Mm (Jobber Series) Having Drill Point Angl E 135 Degree To Is 5101/1991.Acceptable Brands: Addison, It Dagger, Bosch. [ Warranty Pe Riod: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] => Limited

BRR:8438053 Tender For Providing/Fixing Of Galvalume Profile Sheet (Shed) In Mess Of Hostel 1, 8 & Aravali Hostel At Mnit Campus Jaipur.; 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR No. 2.8 2 All kinds of soilDSR No. 2.8.1 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR No. 4.1 4 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR No. 4.1.2 5 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.DSR No. 10.16 6 Hot finished welded type tubesDSR No. 10.16.1 7 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR No. 12.50 8 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR No. 12.50 9 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : DSR No. 13.61 10 Two or more coats on new workDSR No. 13.61.1 11 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge DSR No. 16.68 12 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge DSR 16.68 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR No. 6.1 14 Cement mortar 1:6 (1 cement : 6 coarse sand)DSR No. 6.1.2 15 12 mm cement plaster of mix :DSR No. 13.1 16 1:6 (1 cement: 6 fine sand)DSR No. 13.1.2 17 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.DSR No. 1.10 18 Group B DSR No. 1.10.2 19 Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit asrequired. 20 2 x 2.5 sq. mmDSR No. 1.17.11 21 Supplying and fixing following modular switch/ socketon the existing modular plate & switch box includingconnections but excluding modular plate etc. asrequired. 22 5/6 A switchDSR No. 1.24.1 23 pin 5/6 A socket outlet DSR No. 1.24.4.3 24 Supplying and fixing two module stepped typeelectronic fan regulator on the existing modular plateswitch box including connections but excludingmodular plate etc. as required.DSR No. 1.25 25 Supplying and fixing two module stepped typeelectronic fan regulator on the existing modular plateswitch box including connections but excludingmodular plate etc. as required.DSR No. 1.25 26 Supplying,installation,Testing&Commissioningof Panel light 2x2 ft., of following body material and construction as per IS : 10322 withdriver as per the requirementwith Driver efficiency >85%,Operating voltageAC140-270Volt, frequency 50/60hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95,IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver &electricalcircuitry),ofminimum50000Burning Hourswith,70%ofinitial Lumen maintained till lifeends as per LM80 extrapolation IES TM-21-11 report,CCT3000°K/4000°K/5700°K/6500°K(AsperANSIBin),SDCM(Standard DeviationColour Matching) <3,Maximum power consumption shouldnotmorethan the specified rating and Fixture shall be ofrelevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/Screenprintingonhousing.complete in all respect i/c externalconnections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductorsinglecorecableandearthingetc.as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report andalltestingrequired forLEDfixturesasperBISshallbesubmitted. Shape size and CCT shall be as approved by Engineer-in-Chargeasperrequirement.(Thermal management:heatsinkofaluminiumhousing suchthatLEDjunctiontemperatureshallnotrise above 90°C).Powdercoateddiecast/Extrudedaluminium Body (Thickness > 1.20 mm)DSR No. 8.6 27 15 watt DSR No. 8.6.1 28 Supply, Installation, Testing and Commissioning ofceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. metal( Aluminiumalloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value63 DELHI SCHEDULE OF RATES (E&M)-2025(CM/M/W) minimum as below, 350 RPM (tolerance asper IS : 374-2019), THD (Total Harmonic Distortion)less than 10%, suitable for operation with regulatorfor speed control and all remaining accessoriesincluding safety pin, nut bolts, washers, temperaturerise=75 0C (max.), insulation resistance more than 2mega ohm, suitable for 230 V, 50 Hz, single phase ACsupply, Ceiling Fan compliant to IS 374:2019 fan i/cexternal connections with 1.5 sq.mm FRLS/HFFR,PVC insulated copper conductor single core cableand earthing etc. as required.DSR No. 9.2 29 1050mm, service value ≥ 5.1 CM/Min/Watt, airdelivery 150 CM/Min (Minimum)DSR No. 9.2.2

BRR:8437923 Tender For Supply Of Cctv Camera And Related Items = Limited; 1 Supply Of CCTV Camera and Related Items 2 2MP HD Camera 3 3+1 Copper Cable 4 Camera Accessories like camera box, Clip BNC, DC Pin etc.PNP transistor (BC557) 5 25mm PVC Pipe 6 32 inches TV 7 16 Channel HDVR-AI Configuration 8 4 Tb Hard disc 9 16 Channel SMBS 10 Network Rack with Switch box setup 11 HDMI Cable (DVR to TV) 12 5 MP SMBS 13 LAN Cable (Router to DVR) 14 42 Inches TV 15 1 Tb External Hard disk 16 Inverter wiring to 4 DVR base (Wire) 17 Net Work Cable 18 Installation Charge Please Enable Macros to View BoQ information

BRR:8437813 Tender for (1) Disamantling Of 4000 Gpm Kirloskar Pum And 2000 Gpm Grw Pump Set From Surface And Installation Of Compplete Pump Set On Pontoon With Transporatation Of Pump From Insatallation Point To East Most Side Of Akwmc,Ocp.(2) Break Down 7.5 Hp,Submersinle Pump Motor Set Liftting From Bore Hole And Other Lowering Installation At T.B Ward 48 Unit Under Katras Area.(3) Dsm-3 Pump 2(Two) Nos.Dismantling Transporting From Coal Dump Colony And Dsm-2 Pump From Rhk Tilatand To Kcc Work Shop And After Repairing Bringing To Cdc And Rhk And Installation The Same At Cdc And Rhk Under Katras Area.(4) Dismantling,Removing 1.5 Dia Blocked Pipe 195 Ft And New 1.5 Dia Pvc Pipe Laying And Jointing After Earth/Trench Cutting At Near Sub-Station Kcc, Under Katras Area.(5) 7.5 H.P Submersible Pump Motor Set With 2 Pipe 17 Nos.Cable And Dismantling And Liftting From No.1 Old Weigh Bridge Side New Bore Hole And Other 7.5 H.P Submersible Pump With Its Accessories Lowering And Installationat Coal Dump Colony,Under Ka.

BRR:8437811 Provision Of Continuous Earthing Of Ht Overhead Line Installation Of Non-Linear Resistance Type Lightning Arresters On Ht O H Line Near Colony Substations N Intermittent Earthing Points Along The Ht O H Line Under Township Rajrappa Area

BRR:8437803 Procurement Of Spares Of Afdss Of 33/72 Dragline-item1 FIRE DE TEC TUBE (MTR) item2 CO2 CYLINDER ASSY WITH IHP VALVE (9 KGS) item3 SPRING TOP item4 SPRING TOP item5 PRESSURE SWITCH item6 NON SENSING TUBE item7 TIE WRAP ASSY item8 WEIGHT MONITORING SYSTEM item9 WMS CONTROL UNIT item10 INTERCONNECTING CABLE ASSY. item11 HEAT DETECTOR item12 MANUAL CALL POINT item13 HOOTER item14 CO2 CYLINDER ASSY (6.8KGS) FITTED WITH PNEMATIC VALVE item15 PORTABLE CYLINDER ASSY. item16 NITROGEN CYLINDER ASSEMBLY (0.5 LIT) item17 CO2 NOZZLE item18 FOAM NOZZLE item19 CO2 CYCLINDER ASSY WITH LP VALVE item20 DCP CYLINDER (20KG) => Limited

BRR:8437744 CLEANING OF SILT FROM SEWERLINES OF VARIOUS SIZES BY BUCKET MACHINE IN SECTOR-9 JIND. “CLEANING OF SILT / DE-SILTING FROM VARIOUS SIZES SEWERLINES INCLUDING MANHOLES BY BUCKET TYPE MACHINE AND DISPOSAL OF SAME FROM OUTSIDE THE RESIDENTIAL AREAAND P/F SFRC MANHOLE COVER AT VARIOUS POINTS COMPLETE IN ALL RESPECT IN SECTOR-9, JIND AND ALL OTHER WORKS CONTINGENT THERETO” (INCLUDING ONE YEAR MTC. AND DEFECT LIABILITY PERIOD FREE OF COST) A/c

BRR:8437626 Tender For Purchase Of Submersible Motor Pump And Other Materials For Water Distribution In The City. --1 submersible motor pump and other materials2 10 Hp Submersible Motor Pump, 160 m. Head 16 Stage, Texmo/Falcon/Luby3 7.5 Hp Submersible Motor Pump 121 m. Head 14 Stage4 5 Hp Submersible Motor Pump, 160 m. Head 15 Stage, Texmo/Falcon/Luby5 2 Hp Submersible Motor Pump, 140 m. Head 20 Stage, Texmo/Falcon/Luby6 15 Hp Open Well Submersible Motor Pump, 160 m. Head 20 Stage7 10 Hp Open Well Submersible Motor Pump, 160 m. Head 16 Stage, Texmo/Falcon/Luby8 10 HP Mono Block Motor Pump 40 m9 7.5 Hp Monoblock Motor Pump Texmo/Falcon/Luby/40 m10 5 Hp Monoblock Motor Pump Texmo/Falcon/Luby/40 m11 3 Hp Monoblock Motor Pump Texmo/Falcon/Luby/40 m12 1 HpMonoblock Motor Pump Texmo/Falcon/Luby/40 m13 ½ HP Monoblock Motor Pump Texmo/Falcon/Luby/40 m14 1 Hp Open Well Motor Pump Texmo/Falcon/Luby/40 m15 7.5 Hp Open Well Submersible Motor Pump, 160 m Head 14 Stage Texmo/Falcon/Lubi16 15 HpMU2 Starter LT Star Delta LT Make 42 Amp Relay17 15 HpMU2 Starter LT Star Delta LT Make 32 Amp Relay18 15 HpMU2 Starter LT Star Delta LT Make 28 Amp Relay19 10 HpMU2 Starter LT Star Delta LT Make 42 Amp Relay20 10 HpMU2 Starter LT Star Delta LT Make 32 Amp Relay21 10 HpMU2 Starter LT Star Delta LT Make 28 Amp Relay22 7.5 Hp MU2 Starter LT Star Delta LT Make 22 Amp Relay23 Starter RelayLXT 32A24 Starter RelayLXT 28A25 Starter RelayLXT 22A26 Starter RelayLXT 14 A27 Starter Block No. 2428 Starter Block No. 1829 Starter Block No. 1430 Borecap 1031 Borecap 832 Fitting Material Set 1´´33 Fitting Material Set 2´´34 Fitting Material Set 3´´35 35Hp Starter Emerged36 24Hp Starter Emerged37 15Hp Starter Emerged38 10Hp Starter Emerged39 Transformer Oil Per Litre40 Cutout 100 A Sensitive41 Cutout 63 A Sensitive42 Cutout 32 A Sensitive43 Cutout 16 A Sensitive44 Change Over Switch45 2½ UPVC Column Pipe46 2 UPVC Column Pipe47 1½ UPVC Column Pipe48 1 UPVC Column Pipe49 LT Make 24 Amp Relay50 LT Make 32 Amp Relay51 LT Make 42 Amp Relay52 Point Kit L-N-T-53 2 Hp MU2 Starter Panel Incl.54 4 Square MM Copper Cable 3 Core55 6 Square MM Copper Cable 3 Core56 10x4 Aluminium Service Cable.57 16x4 Aluminium Service Cable.58 25x4 Aluminium Service Cable.59 2 GI Clam60 2½ GI Clam61 3 GI Clam62 2x4 GI Socket63 2 GI Pipe64 1½ GI Pipe65 2x1.5 Wooden Board66 15 Hp Motor Pump VT67 25 Hp Starter Lxt68 2 Bend69 2½ Bend70 1¼ HDEP Pipe71 1 HDEP Pipe72 1.5 HDEP Pipe73 2 HDEP Pipe74 8x2 Aluminium Cable75 10x2 Aluminium Cable

BRR:8437504 Tender For Kwa Revenue-Annual Maintenance 2025-2026-Uwss To Muvattupuzha - Repairs Of Pipe Lines In Muvattupuzha Municipality South Zone For One Year Period.-General Civil Work-Pipeline Work-Pipeline Work - Working charges 2 100.46.1.1:Repairing leakage/breakage of 80mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 3 100.46.2.1:Repairing leakage/breakage of 80mm A.C. pipeline by cutting and dismantling the damaged pipe portion (above 1.5m up to 3.0m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 4 100.46.2.2:Repairing leakage/breakage of 100mm A.C. pipeline by cutting and dismantling the damaged pipe portion (above 1.5m up to 3.0m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 5 100.46.1.2:Repairing leakage/breakage of 100mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 6 100.46.1.4:Repairing leakage/breakage of 150mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 7 100.46.2.4:Repairing leakage/breakage of 150mm A.C. pipeline by cutting and dismantling the damaged pipe portion (above 1.5m up to 3.0m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 8 100.46.1.6:Repairing leakage/breakage of 200mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 9 100.46.2.6:Repairing leakage/breakage of 200mm A.C. pipeline by cutting and dismantling the damaged pipe portion (above 1.5m up to 3.0m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 10 100.46.1.8:Repairing leakage/breakage of 250mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 11 100.46.2.8:Repairing leakage/breakage of 250mm A.C. pipeline by cutting and dismantling the damaged pipe portion (above 1.5m up to 3.0m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 12 100.46.1.9:Repairing leakage/breakage of 300mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 13 100.46.2.9:Repairing leakage/breakage of 300mm A.C. pipeline by cutting and dismantling the damaged pipe portion (above 1.5m up to 3.0m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 14 100.47.1.1:Leak rectification work in 32mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the remaining portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe to the site, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or any available joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers including the cost of pipe and uPVC specials; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: All Socketed Jointing. 15 100.47.1.2:Leak rectification work in 40mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the remaining portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe to the site, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or any available joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers including the cost of pipe and uPVC specials; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: All Socketed Jointing. 16 100.47.1.3:Leak rectification work in 50mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the remaining portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe to the site, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or any available joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers including the cost of pipe and uPVC specials; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: All Socketed Jointing. 17 100.47.1.4:Leak rectification work in 63mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the remaining portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe to the site, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or any available joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers including the cost of pipe and uPVC specials; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: All Socketed Jointing. 18 100.47.1.5:Leak rectification work in 75mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the remaining portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe to the site, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or any available joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers including the cost of pipe and uPVC specials; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: All Socketed Jointing. 19 100.47.1.6:Leak rectification work in 90mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the remaining portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe to the site, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or any available joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers including the cost of pipe and uPVC specials; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: All Socketed Jointing. 20 100.47.3.1:Leak rectification work in 90mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damage to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, ribbon fencing, lighting, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: C.I.R. Jointing. 21 100.47.2.1:Leak rectification work in 90mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earth work excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: Socket & C.I.R. Jointing. 22 100.47.2.2:Leak rectification work in 110mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earth work excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: Socket & C.I.R. Jointing. 23 100.47.3.2:Leak rectification work in 110mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damage to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, ribbon fencing, lighting, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: C.I.R. Jointing. 24 100.47.2.3:Leak rectification work in 140mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earth work excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: Socket & C.I.R. Jointing. 25 100.47.3.3.a:Leak rectification work in 140 mm PVC (Class 2 to 6) pipe line including detectingand locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned,and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depthincluding consolidating each layers by ramming, watering, charges for removingsurplus soil from work site, without causing any damage to the existing utilities,including hire for tools and plant, conveyance oftools and materials, bailing out water, providing caution boards, ribbon fencing, lighting, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe& specials but excluding the cost ofC.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: C.I.R. Jointing. 26 100.47.2.4:Leak rectification work in 160mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earth work excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: Socket & C.I.R. Jointing. 27 100.47.3.4:Leak rectification work in 160mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damage to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, ribbon fencing, lighting, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: C.I.R. Jointing. 28 100.47.2.6:Leak rectification work in 200mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earth work excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: Socket & C.I.R. Jointing. 29 100.47.3.6:Leak rectification work in 200mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damage to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, ribbon fencing, lighting, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: C.I.R. Jointing. 30 100.47.3.7:Leak rectification work in 250mm uPVC (Class 2 to 6) pipeline including detecting and locating leak, earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damage to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, ribbon fencing, lighting, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials but excluding the cost of C.I.R. Joints; uPVC Pipes and specials shall be of good quality and conforming to relevant standards: C.I.R. Jointing. 31 100.48.1.4:Rectification of leakages in 150mm C.I. Pipe of all classes by replacing a length up to 1.5m including earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting and removing and stacking the damaged portion from the existing line without causing any damages to the remaining portion and specials and conveying and replacing with the C.I. pipe and conveying and jointing with C.I.D. joint / suitable mechanical joint of suitable size or any other available size suitable joints after cleaning the ends, grinding if necessary, centering the pipe, inserting the joints, tightening to make a water tight joint, charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges of conveyance and hire for tools and plant, bailing out water, lighting, watching, ribbon fencing, providing caution boards, traffic diversion but excluding cost of materials and as per the direction of departmental officers etc., complete. 32 100.48.1.5:Rectification of leakages in 200mm C.I. Pipe of all classes by replacing a length up to 1.5m including earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, cutting and removing and stacking the damaged portion from the existing line without causing any damages to the remaining portion and specials and conveying and replacing with the C.I. pipe and conveying and jointing with C.I.D. joint / suitable mechanical joint of suitable size or any other available size suitable joints after cleaning the ends, grinding if necessary, centering the pipe, inserting the joints, tightening to make a water tight joint, charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges of conveyance and hire for tools and plant, bailing out water, lighting, watching, ribbon fencing, providing caution boards, traffic diversion but excluding cost of materials and as per the direction of departmental officers etc., complete. 33 100.48.2.6:Rectification of minor joint leakages in 250mm C.I. Pipe including earthwork excavation in all kinds of soil for exposing leaking joint including tar cutting / concrete cutting, without causing any damages to the line and specials, cleaning the joints including raking out the damaged lead wool, conveying and inserting hemp and lead wool and caulking after cleaning the ends, charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges of conveyance and hire for tools and plant, bailing out water, lighting, watching, ribbon fencing, providing caution boards, traffic diversion, including cost of materials and as per the direction of departmental officers etc., complete. 34 100.48.2.7:Rectification of minor joint leakages in 300mm C.I. Pipe including earthwork excavation in all kinds of soil for exposing leaking joint including tar cutting / concrete cutting, without causing any damages to the line and specials, cleaning the joints including raking out the damaged lead wool, conveying and inserting hemp and lead wool and caulking after cleaning the ends, charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges of conveyance and hire for tools and plant, bailing out water, lighting, watching, ribbon fencing, providing caution boards, traffic diversion, including cost of materials and as per the direction of departmental officers etc., complete. 35 100.49.1.7:Rectification of joint leakages in 400mm D.I. Pipe (cutting, removing and laying back a length of 1.0m from one side of the joint) including earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar cutting / concrete cutting, by cutting and removing a portion of pipe from the damaged joint without causing any damages to the remaining portion of the line and specials and replacing the pipe with mechanical and tyton joint after cleaning the ends, centering the pipe, providing the joints, testing the line to the required test pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges of hire and conveyance of tools, plants and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion but excluding cost of mechanical joint and as per the direction of departmental officers etc., complete. 36 100.50.1.1:Rectification of leakages of 32mm, 40mm & 50mm G.I. Pipes by replacing lengths up to 1.0m including earthwork excavation in all kinds of soil for exposing leak portion of the pipe including tar / concrete cutting, by cutting, removing and stacking the damaged portion from the existing line without causing any damages to the remaining portion and specials and conveying and replacing with G.I. Pipes of suitable size and jointing by thraded coupler and union of suitable size including threading, alignment, laying and jointing to make a water tight joint, testing the line to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other utilities, including the charges hire and conveyance of tools, plant and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion, including the cost of specials but excluding cost of pipe and as per the direction of departmental officers etc., complete. 37 100.50.3.3:Rectification of leakages of 80mm G.I. Pipes in exposed portions by replacing lengths up to 1.0m by cutting, removing and stacking the damaged portion from the existing line without causing any damages to the remaining portion and specials and conveying and replacing with G.I. Pipes of suitable size and jointing by three run welding to make a water tight joint, painting the welded portion, testing the line to the required pressure, rectifying any defects noticed, without causing any damages to any other utilities, including the charges hire and conveyance of tools, plant and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion, necessary scaffolding including the cost of specials but excluding cost of pipe and as per the direction of departmental officers etc., complete. 38 100.50.3.4:Rectification of leakages of 100 mm GI Pipes in exposed portions by replacing lengths up to 1.0m by cutting, removing and stacking the damaged portion from the existing line without causing any damages to the remaining portion and specials and conveying and replacing with GI Pipes of suitable size and jointing by three run welding to make a water tight joint, painting the welded portion, testing the line to the required pressure, rectifying any defects noticed, without causing any damages to any other utilities, including the charges hire and conveyance of tools, plant and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion, necessary scaffolding including the cost of specials but excluding cost of pipe and as per the direction of departmental officers etc. complete. 39 100.51.1: Disconnecting water connection from service mains along earthern road without causing any damage to the existing line including charges of earth work excavation in all kinds of soil for exposing connection point including tar cutting / conrete cutting if any, making the disconnection point water tight charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other existing utilities, including the charges of hire for tools and plant, conveyance of tools and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion but excluding cost of materials and as per the direction of departmental officers etc. complete. 40 100.51.2:Disconnecting water connection from service mains along Concrete road without causing any damage to the existing line including charges of earth work excavation in all kinds of soil for exposing connection point including tar cutting / conrete cutting, making the disconnection point water tight charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other existing utilities, including the charges of hire for tools and plant, conveyance of tools and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion but excluding cost of materials and as per the direction of departmental officers etc. complete. 41 100.51.3:Disconnecting water connection from service mains along Asphalt road without causing any damage to the existing line including charges of earth work excavation in all kinds of soil for exposing connection point including tar cutting / conrete cutting, making the disconnection point water tight charging and testing to the required pressure, rectifying any defects noticed and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, removing the surplus soil from the work site, without causing any damages to any other existing utilities, including the charges of hire for tools and plant, conveyance of tools and materials to the leak site, bailing out water, lighting, watching, ribbon fencing, caution boards, traffic diversion but excluding cost of materials and as per the direction of departmental officers etc. complete. 42 100.53.1.a:Washing OHSR/GLSR using brooms, brushes and bleaching powder by engaging coolies, scrubbing twice, washing and cleaning using fresh water, including side wall, floor slab and columns, disposing the the slurry / waste materials away from the immediate premises and within the initial lead of 50m from the periphery of the tank, without causing any damage to the existing structure and installations, charges including the operation of valves, conveyance and hire charges of tools and as per the direction of the department officers etc. complete. 43 100.98.18:Supply of Quarry Muck. 44 100.98.1007:Engaging Beldar 45 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 46 OD58521/2025-2026:Rectification of leakages in 150size of GI Pipes in exposed portions by providing fabricated MS saddle, rectifying any defects noticed, without causing any damages to any other utilities, including the charges hire and conveyance of tools and materials to the leak site, bailing out water, lighting, watching, fencing, caution boards, traffic diversion as per the direction of departmental officers etc. complete. 47 OD58522/2025-2026:Rectification of leakages in 100/125mm size of GI Pipes in exposed portions by providing fabricated MS saddle, rectifying any defects noticed, without causing any damages to any other utilities, including the charges hire and conveyance of tools and materials to the leak site, bailing out water, lighting, watching, fencing, caution boards, traffic diversion as per the direction of departmental officers etc. complete. 48 OD58523/2025-2026:Rectification of leakages in 65/80 various size of GI Pipes in exposed portions by providing fabricated MS saddle, rectifying any defects noticed, without causing any damages to any other utilities, including the charges hire and conveyance of tools and materials to the leak site, bailing out water, lighting, watching, fencing, caution boards, traffic diversion as per the direction of departmental officers etc. complete. 49 OD58520/2025-2026:Rectification of leakages in 32/40/50 size of GI Pipes in exposed portions by providing fabricated MS saddle, rectifying any defects noticed, without causing any damages to any other utilities, including the charges hire and conveyance of tools and materials to the leak site, bailing out water, lighting, watching, fencing, caution boards, traffic diversion as per the direction of departmental officers etc. complete. 50 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. 51 Cost of Materials 52 OD58533/2025-2026:Cost of 80mm CID Joint 53 OD58531/2025-2026:Cost of 100 mm CID Joint 54 OD58528/2025-2026:Cost of 150mm CID Joint 55 OD58524/2025-2026:Cost of 200 mm CID Joint 56 OD58532/2025-2026:Cost of 250mm CID joint 57 OD58527/2025-2026:Cost of 300mm CID Joint 58 OD58534/2025-2026:Cost of 90 mm CIR Joint 59 OD58525/2025-2026:Cost of 110mm CIR Joint 60 OD58529/2025-2026:Cost of 140mm CIR Joint 61 OD58535/2025-2026:Cost of 160mm CIR Joint 62 OD58526/2025-2026:Cost of 200 mm CIR Joint 63 OD58530/2025-2026:cost of 250mm CIR joint

BRR:8437209 Executive Engineer No. 1 To carry out daily maintenance and repair works related to water supply at Padmavati Tanker Point under Swargate Water Supply Department. (For Technical Sanctioned)

BRR:8437169 Tender For Repairs To Roof Leakage Seepage And Sunken Portion And Certain Br And Em Repairs In Bldgs At New Military Station Kapurthala.; 1 Dismantling offloor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed . 2 M&L forglazed ceramic coloured tiles in vertical surfaces of size 450x300x7mm thick, setand jointed in neat cement slurry pointed in white or colour cement to match the colour, over and including10 mm thick rendering on fair faces of brickwork in (1:4)complete all as specified and directed . 3 M&Lfor non skid ceramic tiles coloured tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.11sqm not exc 0.18 Sqmin floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed. 4 M&L for epoxy grout/ epoxy resin with property of water resistance, stain resistance for filling in the voids of wall and floor tile joints of width 2-3 mm, 10mm deep, complete, all as specified and directed. 5 Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises,complete, all as specified and directed. 6 M&L forBrickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete, all as specified and directed. 7 Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. 8 M & L forrendering 15mm thick on brick wall or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement,complete all as specified. 9 M&L for 15mm thick rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed. Note: WPC shall be paid measured & paid separately under respective item. 10 M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces asin ceiling etc complete all as specified and directed. 11 Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed. 12 S&Fsolid PVC door frame of size 50x47mm made out of5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed. 13 S&F solid panel factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, drawing and as directed. 14 S&F Alumunium hinges for PVC door shutter, size of hinges100mm, complete, all as specified and directed. 15 S&F Aluminium anodised barrel tower bolts of extruded section and fixed, length of bolt200mm, complete, all as specified and directed. 16 S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long, complete, all as specified and directed. 17 S&F Anodised aluminium frame, powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 18 S&F Anodised aluminiumventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed. 19 S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty, complete, all as specified and directed. 20 S&F glavanised MS wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge 21 M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over and including a coat of 3 mm thick wall care putty, complete all as specified and directed. 22 M & L for preparation of newly plastered or unplastered wall surface and applying two coats of cement base paint over and includinga coat of primer, complete all as specified and directed. 23 M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash on ceiling over a coat ofwhite wall care putty complete all as specified and directed. 24 Supply and applying high built elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrance with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes cleaning of surface and made free from dust for final base prepration, epoxy primer 1: (resin; harder) application with 100% water dilution and pure polyurethane appliction in 2 coats with a tortal min consumption of 1.25 kg per Sqm. Appliction should be done with Graco sprayer by a company autorised applicator with guarantee period of 10 years, complete, all as specified & directed. 25 M&L for cleaning the surface and made free of vegetation, dirt, foreign particles, liatance all as specified and directed. 26 M&L for providing GI pipe 40mm light grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed. 27 M&L for PCC (1:5:10) type E2 using 40mm gradedaggregateas in sub basecomplete all as specified and directed by Engineer-in-charge. 28 M&L for40 mm thick PCC type B-0, 1:2:4 using 12.5mm graded crushed stoneaggregate,as in receiving top finishing layer of ceramic tiles for sunken portion, finished even and smooth without using extra cement, complete, all as specified and directed. 29 Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. 30 Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. 31 S & F CPVC pipes CPVC PIPE OUTER DIAMETER 16mm, SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and directed. 32 Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. 33 S & F CPVC pipes CPVC PIPE OUTER DIAMETER 20mm, SDR 11 & Plain CPVC SDR 11 fittings, complete, all as specified and directed. 34 S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed, complete, all as specified and directed. 35 S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed,complete all as specified and directed 36 S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, including PVC flushing cistern low levelof 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc, complete, all as specified and directed. 37 S&F in repairs Vitreous China wash down Water closet pan (pedestal pattern) with plasticcloset seatcover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed. 38 S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. 39 S&F in repairs fancy type chromium plated stop valves of 15 mm bore with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 40 S&F in repairs shower rose 100mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed. 41 Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing oretc and making good complete all as specified and directed. 42 Taking down rainwater pipes including all fittings as specified and directed. 43 Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors, complete, all as specified and directed. 44 S&F75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed. 45 S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete, all as specified and directed . 46 S&F 75 mm PVC (SWR) bend , complete, all as specified and directed . 47 S&F 75 mm PVC (SWR) junction single,(single T) equal or unequal with access door, complete, all as specified and directed . 48 S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed . 49 S&F 110 mm PVC (SWR) bend, complete, all as specified and directed . 50 S&F 75mm PVC(SWR) vent cowl, complete, all as specified and directed . 51 Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top), double layered, ISI marked, hoisted and fixed in position all as specified including Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight for 20mm-210 gms) complete, screwed for iron pipe or brass ferrule and fixed, Complete all as specified and directed. 52 S&F in repairs gun metal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm, complete, all as specified and directed. 53 S&F in repairs gun metal globe and gate valve with iron welded hand secrewed both and for iron pipe 15 mm, complete, all as specified and directed. 54 S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight for 20mm-210 gms) , complete, all as specified and directed. 55 Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs, complete, all as directed. 56 Demolition of mud in roof, any thickness including plastering & leeping removed, complete, all as directed. 57 M&L for rendering 10mm thick in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instructions, on fair faces of concrete surface, finished even and smooth, complete, all as specified & directed.Note:- WPC shall be measured and paid seprately under respective item. 58 Supply only integral water proofing compound, ISI marked. 59 Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multi polymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) as in roof slab and sunken portion, complete all as specified and directed. 60 M&Lfor 40mm thick brick tiles laid on and including 15mm thick screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement, complete, all all asspecified and directed. 61 All as per item no 60 above but except brick tiles. 62 M&L for 50 mm thick Cement concrete type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in PCC padding over roof slab, finished even and smooth without using extra cement, complete all as specified anddirected. 63 M&L for cement concrete type B0,1:2:4 using 12.5mm graded crushed stone aggregates as inroof kerbs, rounded or chamfered edges complete all as specified and directed. 64 Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed. 65 M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- 66 One light point controlled by one, one way switch 67 One fan point controlled by one, one way switch 68 One socket outlet 3 Pin, 5 Amp on independent board 69 One socket outlet 3 Pin, 5 Amp on same board. 70 M&L for point wiring with 2.50 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated 4 mm sheet top cover with 2.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board, complete, all as specified & directed. 71 S&Fswitch piano flush type single pole one way 5 Amp (ISI Marked) 72 S&F switch piano flush type single pole one way 15 Amp (ISI Marked) 73 S&F socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) 74 S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) 75 M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) 76 Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. 77 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified anddirected. 78 Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.including LED lamp 09 Watt, complete, all as specified & directed.

BRR:8437161 Tender For Maintenance & Repair Of Stp And Sewage Pump Installation Replacement Of Parts Under Ge (East) Bareilly; 1 Dewateringandpumpingoutofexistingaccumulatedsewage/sludgeat STP MHof Capacity 150 KLDfromTube Settler tankby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, including removingduck mediaand followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls after that replacing of duck media with new as per existing complete all as specified and directed. 2 All as per Srl item No.1 here-in-before but STP 80 OR of Capacity 90 KLD 3 All as per Srl item No.1 here-in-before but STP42 Map and Lal Phatak of Capacity upto 461 KLD 4 All as per Srl item No.1 here-in-before but STP JRC of Capacity01 MLD. 5 Note for item no. 1 to 4 :- (a)The followings are deemed to be included in the rate quoted.(i) The disposal of accumulated/deposited sludge after dryingoutsidethedefence landtoa distance exceeding1.5 KM and notexceeding 5.00KM fromthe STP. (ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge bemade and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days.(iii) Cutting and rewelding of supporting MS frame structure.(b)Replacement of unsv rusted portion of supporting MS frame structure. The cost of MS frame will be measured and paid separately 6 DewateringandpumpingoutofexistingaccumulatedsewagefromChlorine Contact Tank and Treated Water Tank at STP 80 OR of capacity of 90 MLDby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note :- (i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP.(iii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. 7 All as per Srl item No. 6 here-in-before but STP MHOR of Capacity of 150 KLD complete all as specified and directed 8 All as per Srl item No.6 here-in-before but STP JRCof Capacity 01 MLD complete all as specified and directed. 9 All as per Srl item No.6 here-in-before but STP 42 Map , Lal Phatakof Capacity 461 KLD complete all as specified and directed. 10 DewateringandpumpingoutofexistingaccumulatedSludge and Water from Sludge Holding Tank at STP 80 ORs of Capacity of 90 KLDby using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note:- (i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. (iii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP. 11 All as per Srl item No.10here-in-before but STP MHOR of Capacity of 150 KLD complete all as specified and directed. 12 All as per Srl item No. 10 here-in-before but STP JRCof Capacity 01 MLD complete all as specified and directed. 13 All as per Srl item No. 10 here-in-before but STP 42 Map& Lal PhatakSTP of Capacity 461 KLD complete all as specified and directed. 14 DewateringandpumpingoutofexistingaccumulatedSludge and mud including cutting of grass, bushes, plant growth fromSludge Drying Beds at STP under GE East bareilly by using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note:-(i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account.(ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. (iii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP. (iv) Cleaning of sludgetransfer line from tube settler tank to Sludge holding tank 15 Supply and fix in replacement of Glass tube type Air Rotameterincluding taking down existing unserviceable Air Rotameter of any description complete all as specified and directed.Make: Flowstar / Microflow / Aster 16 M&L forreplacement of Unsv MBBR Mediafrom the tank and supply of filling Fresh media of MBBR Media in the main reactor as specified of existing /suitable Make with the following specificatios:-Effective surface area of media Approx - 400 Sqm/Cum(b) Mesdia ht Approx - 15/10 mm(c)Media dia Approx-22 mm(d) Weight per unit surface area approx -22 mm(e) Voidage - >093 gm/Cucm(g) Media fill Range - 25-55% of volume 17 S&F in replacement, heavy duty cloth strips of filter press as per existing frame of capacity ofupto 01 MLDand complete over hauling of filter press including testing complete all as specified and directed. 18 S&F in replacement, heavy duty cloth strips of filter press as per existing frame of capacity of 150KLDand complete over hauling of filter press including testing complete all as specified and directed. 19 Supply and fixed in replacement, connecting and testing of(non return valve ISI - 5312) CI of 150 mm sizes bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers complete all as specified and directed. 20 Supply and fix in replacement of CI Butterfly valve of following size as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts,bolts,washersetc.includingtakingup/downofexistingunserviceablebutterflyvalveofanydescription complete of size 50 mm all as specified and directed.Make : Leader / Crawley / Audco / L&T / Zoloto 21 All as per Srl item No.20 here-in-before but 100 mm completeall as specified and directed. 22 All as per Srl item No.20 here-in-before but 150 mm completeall as specified and directed. 23 Material and labour for M.S. Black Pipe of size 80mm bore, plain end as per IS:1239 (I), nominal bore, heavy Grade (C class)with all fittings like elnow, tee reducer, flange nut bolt with washer including cutting, welding and joining etc as per site requirement and applying two coats of syntheticenamelpaintofapproved colourover acoat ofred oxideprimer includingtaking up/ downof existing unserviceable pipe of any description complete all as specified and directed.Make : Tata / Jindal / Prakash Surya. Note:- fixing of pipe line will be carried out on wall or floor and cost of the same will be deemed to be included in tthe rate quoted however for the pipe line laid under ground by digging trench will be paid saperately. 24 All as per Srl item No.23here-in-before but 100 mm completeall as specified and directed. 25 All as per Srl item No.23 here-in-before but 150 mm completeall as specified and directed. 26 All as per Srl item No.23 here-in-before but 50 mm mm completeall as specified and directed. 27 M&L for Structure Steel Work, made out of godquality-A Rolled Mild Steel Chaneel, Angle or Tee Sections, MS Sheet with hinges & looking arrangements et. Cut to shape / ordinary length, drilled and counter sunk for screws / Bolts, including bending and welding duly painted with 2 coats of anticorrosive synthetic enamel paint over a coat of Zinc Chromate as in framed work with MS Sheet cover complete all as specified and directed. 28 M&L for complete overhauling and repairing of multi-grade sand filter and carbon filter unit with replacement of filter media as per existing and activated carbon filter media including replacement of filter media including other connected assessories as required at site of STP JRC capacity of 1 MLD including testing and wire mesh size shuold as per existing, colour in Black, Grade of GAC8x30 and bulk density approx 450kg /cum, Hardness (abrasion number) approx 95-99 and PH value - 7 complete all as specified and directed 29 All as per item Ser No. 28 here-in-before butSTP 80 (OR) capacity of 90 KLD completeall as specified and directed. 30 All as per item Ser No. 28 here-in-before butSTP MH capacity of 150 KLD completeall as specified and directed. 31 All as per item Ser No. 28 here-in-before butSTP No. 42 and Lal Phatakcapacity of461/500 KLD completeall as specified and directed. 32 M&L for cleaning, scrapping out side of vessel properly including painting with one coat zinc chrome primer & two coats of best quality synthetic enamel paint etc. complete all as specified and directed 33 M&L for servicing / maintenance of air compressor 415 volts 50 Hz motor complete with cleaning of air tank incl replacement of all defective parts and lubricating oil complete all as specified and directed.Note:-Spare parts will be measured and paid under relevant item separately.All minor consumables incl T&P and Tpt required shall be deemed as included in the rates quoted. 34 Supply only rotor roller machineing and alignmentcomplete all as specified and directed. 35 Supply only all packingfor casing complete all as specified and directed. 36 Supply only air filtercomplete all as specified and directed. 37 Supply only O-Ring complete all as specified and directed. 38 Supply only oil seal complete all as specified and directed. 39 Supply only Gear wheel pair complete all as specified and directed. 40 Supply only lock nut complete all as specified and directed. 41 Supply only lock washer complete all as specified and directed. 42 Supply only ball bearing No. 2211 complete all as specified and directed. 43 Supply only ball bearing No. 3211 complete all as specified and directed. 44 Supply only ball bearing No. 6211 complete all as specified and directed. 45 Supply only V belt complete all as specified and directed.Make Fainiyar 46 M&L removing the submersbile pump set from existing position, Shifting to authorised workshop for repair work, dismantle/open, removing the burnt winding, cleaning of rotor / stator, re-winding the motor with F Class insulation super enameled copper wire of size equivalent to the original winding incl insulate packing materials, Varnishing, Drying incl replacement of both water seal, compound, both bearing, fill with new lub oil etc. re-assembling the pump set, installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed. Note : Rate quoted shall deemed to be inclusive ofdraining out the sewage water from collection tankfor taking out the unserviceable motor and pump including lowering and lifting 47 All as per Srl item No. 46here-in-before but more than 7.5 HP and upto 10 HP. 48 All as per Ser item No. 46here-in-before but more than 11 HP and upto 15 HP. 49 M&L for removing the submersbile pump set from existing position, Shifting to authorised workshop for repair work, overhauling and servicing of submersible pump set with motor incl replacement of unsv nuts, bolts & washers, seals, packing, opening of delivery casing volute for checking of non clog type impeller checking & replacement of stuffing box unit seals and match seal housing /casing cover for checking/filling of suitable grade lubricating oil upto required, checking of seat & replacement of seat ring, checking for smoothness of motor runnning and clearance between impeller and casing ring and casing cover, greasing of flower bearing of pump set, incl cleaning of 3 phase electric submersible squirrel cage induction motor in water tight housing testing it for its water tightness by air for its joints incl replacements of unsv parts as required re-assembling the pump set, installing back to the original position testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed.Note :- 1. Spares parts will be measured and paid under relevant items separately all minor consumable/Eqpt/Tpt required shall be deemed as included in the rates quoted2. Note : Rate quoted shall deemed to be inclusive ofdraining out the sewage water from collection tankfor taking out the unserviceable motor and pump including lowering and lifting 50 All as per Srl item No. 49 here-in-before but more than 5 HP and upto 10 HP complete all as specified and directed. 51 All as per Srl item No. 49 here-in-before but more than 10 HP and upto 15 HP complete all as specified and directed.. 52 Supply only Non Clog impeller suitable for and upto 5 HP submersible pump set complete all as specified and directed. 53 All as per Srl item No. 52 here-in-before but more than 5 HP and upto 10HP complete all as specified and directed.. 54 All as per Srl item No. 52 here-in-before but more than 10 HP and upto 15 HP complete all as specified and directed.. 55 Supply only upper/lower or back to back roller or Ball bearing suitable for and 3 HP to 15 HP non clog submersible pump set complete all as specified and directed.Make FAG/SKF 56 Supply only Mechinical seal carbonite25 mm suitable for and upto 3 Hp to 5 HP non clog submersible pump set complete all as specified and directed 57 Supply only Mechinical seal carbonite33 mm suitable for and 7.5HP to 20 HP non clog submersible pump set complete all as specified and directed 58 Supply only oil seal2 HP to 5 HP non clog submersible pump set complete all as specified and directed. 59 M&L for dismantling and removing the motorof the mono block / coupled Pump set or Air Compressor from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding cleaning rotor/stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding incl insulate packing materials, Varnishing, Drying etc inclinstalling back to the original position, testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed. 60 All as per Srl item No. 59 here-in-before but more than 5 HP and 10 HP completeall as specified and directed.. 61 All as per Srl item No. 59 here-in-before but more than 10 HP and upto 20 HP completeall as specified and directed.. 62 M&L for Dismantling and removing the mono block / Coupled pump set from the existing position after disconnecting the inlet/outlet pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, opening the pump side, servicing the pump set including cleaning the shaft including replacement of worn out bearing, bushes, check nut, shaft sleeves etc. and installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the capacity of pump upto 5HP complete all as specified and directed.Note: Spares parts will be measured and paid under relevent item separately. Allminor consumables / Eqpt /Tpt required shallbe deemed as included in the rates quoted. 63 All as per Srl item No. 62 here-in-before butmore than 5HP upto 10HP complete all as specified and directed. 64 All as per Srl item No. 62 here-in-before butmore than 10HP upto 20 HP complete all as specified and directed. 65 Supply only Ballbearing of suitable size for and upto 5 HP mono block / Coupled pump set. Make: SKF / NBCcomplete all as specified and directed. 66 All as per Srl item No. 65 here-in-before butmore than 5HP upto 10 HP complete all as specified and directed. 67 All as per Srl item No. 65 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 68 Supply only brass bush of suitable size for and upto 5 HP mono block / Coupled pump set complete all as specified and directed. 69 Allas per Srl item No 68 here-in-before butmore than 5 HP upto 10 HP complete all as specified and directed. 70 All as per Srl item No. 68 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 71 Supply only new impeller of suitable size for and upto 5 HP mono block / Coupled pump set complete all as specified and directed. 72 All as per Srl item No. 71 here-in-before butmore than 5 HP upto 10 HP complete all as specified and directed. 73 All as per Srl item No. 71 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 74 M & L in repairs for Gland packing of thickness upto 14mm complete all as specified and directed. Make: Spitmaan Graflon / Charminar / Champion 75 M&L in repairs Air Cobe, suitable size for mono block / Coupled pump set, made outof brass, as per site complete all as specified and directed. 76 M&L for cleaning and desiIting the sewage intermediate well of any capacity, dewatering the complete well,removing allthe deposited sludge, soil and other material from the well including bailing / pumping out muddy water from the well by manually or by providing suitable pump sets from bottom level of well, scrapping out the scales / deposits from inner surface of the well throughly, washing with bleaching powder and soda ash, cleaning / bailing out settled materials completely by any means and removing sludge to a distance up to 3 km out side of defence land limit and dispose off in low lying area including dewatering as required including writing Tank cleaned on ......(date) with 10 cm size white letter on black surface by engaging skilled artist using first quality synthetic enamel paint complete all as specified and directed.Note:-(i) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in Lift well.(ii) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe Lift wellcost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. (iii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at lift well in order to complete the work at the earliest. 77 Allas per Srl item No 76 here-in-before but Collection tank ofSTP JRC complete all as specified and directed. 78 Allas per Srl item No 76 here-in-before but Collectiontank ofSTP MH complete all as specified and directed. 79 Allas per Srl item No 76 here-in-before butcollection tank of STP 80 Ors complete all as specified and directed. 80 Allas per Srl item No 76 here-in-before butcollection tank of STP 42 Map& Lal Phatak complete all as specified and directed. 81 M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS pipes with one coat of black Japan paint over a coat of Zync Chromate complete incl its MS supports / clamps / nuts / bolts and marking / writing flow arrows and name with white paint by skilled painter Allas directed of 150 - 200mm dia complete all as specified and directed. 82 All as per Srl item No. 81 here-in-before but80 to 100 mm dia complete all as specified and directed. 83 All as per Srl item No.81 here-in-before but 50 mm dia complete all as specified and directed. 84 All as per Srl item No. 81 here-in-before but 25mm dia complete all as specified and directed. 85 S&F in repair and connect, MCB SP 6 to 32 A, AC, 240V, ISI Marked complete all as specified and directed. 86 S&F in repair and connect, Isolator DP, 40A, AC, 240V, ISI Marked complete all as specified and directed. 87 S&F in repair and connect, Isolator 4P, 63A, AC, 415V, ISI Marked complete all as specified and directed. 88 S&F in repairs and connect, Single Phase Preventer suitable for motor protection complete all as specified and directed. 89 S&F in repairs and connect, NO-NC auxiliary contact block suitable for 20 to 40A 3 phase contactors complete all as specified and directed.. 90 S&F in repairstimer suitable for starter complete all as specified and directed. 91 S&F in repairs and connect, over load Relay 3 Phase, 415V, 25 Amp to 40 Amp complete all as specified and directed. 92 S&F in repairs and connect, DOL starter suitable 2 to7.5HP motor, 3 Phase, 415 V, with 1Ø preventer and thermal relays complete all as specified and directed. 93 Allas per Srl item No 92 here-in-before butfor more than 7.5to15HP complete all as specified and directed. 94 S&F in repairs, fully automatic star delta motor starter suitable for 15/ 20HP pumpset, 3 phase, 415 V with relay of suitable rangeincl enclosure complete all as specified and directed.Make : L&T, model No. ML- 4FASD or equivalent of C&S / Legrand complete all as specified and directed. 95 S&F in repairs, 3Pole MCCB 25 -100 Amp, 50 Hz, 415 V with rupturing capacity 18KA with Thermal - Magnetic Release. complete all as specified and directed. 96 All as per Srl item No 100 here-in-before but 4 Pole100-200Amps. 25KA complete all as specified and directed. 97 S&F in repairs, testing Volt meter 0-500 Volts complete all as specified and directed. Make: AE/ Rishab/Meco/Enercon. 98 S&F in repairs, Pressure Gauge, 100/80 mm dia, 0 - 100 lb/Sq inchpressure rating complete all as specified and directed. Make: Lub / Meco / H Guru / Pfizer 99 Supply and fixing ofnon clog sewage submersible pump set, 3HP, 3Ø, AC, 4150V,25 Mtr Head complete all as specified and directed. Make: CG/ Kirloskar / KSB 100 Supply and fixing ofnon clog sewage submersible pump set, 2HP, 1Ø, AC, 240V,complete all as specified and directed. Make: CG/ Kirloskar / KSB 101 Supply only DWPE (Dewatering Polyelectrolyte) powder, pack of 10/25Kg in polythene bags / HDPE drums complete all as specified and directed 102 Supply only AQUAFIT-CHLORINE-65%-70% (Calcium based granular disinfectant for water treatment, more stable than Chlorine gas, and stronger than Bleaching powder, and sodium Hypochlorite) in 45 kg Drums complete all as specified and directed.Make : Sree Rayalaseema HI-Strtength HYPO LTD . 103 Supply only Calcium Hydro-Oxide (Lime, 80-85%) in Powder form as pH Booster for STP water, packing in 40 Kg Packs complete all as specified and directed. 104 Supply only Ortho Tolidin solution for testing of dissolved chlorine in water complete all as specified and directed 105 Supply only Chlorination testing glass test Tube kit complete all as specified and directed 106 Supply only Alum Ferric(Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm Max and arsenic 6 ppm Max) confirming to IS-299/2012 (Revised) as amended upto date complete all as specified and ddirected by Engineer-in-Charge.(Note :- The Alumino Ferric Sulphate shall be supplied in superior quality bricks (slabs) as per IS specifications.Manufacturers Name/trade mark shall be engraved on each brick (slab) in addition to marking of relavant clause of IS specification). 107 M&L for replacementfilteration media of sixdrying bed with ten layer of sand gravals and stone gravels as per existing all as specified and directed 108 Supply only bacteria culture areobicin 30 Kg of drum complete all as specified and directed. 109 Supply only DAP fertiliser for day to day use in sewage treatment plant complete all as specified and directed. 110 Supply only molassesfor day to day use in Sewage treatment plant complete all as specified and directed. 111 Supply only PAC (Poly Aluminium Chloride AC 1005 in organic soluable Polymer Powder packed in 25 Kg Poly bags completed all as specified and directed. 112 M&L for testing of treated sewage water from out letof chlorine contact tank once in every threemonths from NABL accredited authorized lab as per IS 3025 forrecording essential parameters such as BOD, COD, PH, suspended solids and total dissolved solids complete for STP JRC , 80 OR,MH and 42 Map and Lal Phatak all as specified & directed. 113 Supply only compressor oil 320 grade complete for top up oil levelall as specified and directed . 114 Supply and fix in replacement u/s selector switchcomplete 230 volt complete all as specified and as directed. Make L&T/Kaycee 115 Supply & fix in repairpush buttonswitch with mounting adaptor complete 230 volt complete all as specified and as directed. Make-L & T/Kaycee./BCH 116 M&L for cleaning panel bdbusbar and de carbounising of panel board and replacement of unsv parts including wiringand testing complete all as specified and as directed. 117 M&L for taking outunserviceable Air diffuser andreplacement with new one air diffuser complete as per existingall as spefified and directed 118 M&L for complete overhauling and repairing of cake formation Machine and airCompressor of capacity upto 5 HPand all the connection of chemicalmixerincluding other connected assessories as required at site for STP JRC Capacity of 1 MLDas specified and directed.Note:- 1. Payment will be made aftertesting of forming of cake 119 Supply and fixing ofFilter press Plate as per existing size in Cake formation machine complete all as specified and directed 120 Supplying and fixing in repair Switch Gear Change over of 400 Amps 3 Pole 415 volts complete all as specified and directed 121 Supplying and fixing Contactor 40-50 Amps3 phase Volts all as specified and directed 122 M&L for taking out floating wasteplastic and other particles from collection tanks of STPs as and when required and directed by Engr-in-charge and disposing them out of the cantonment area in waste dumping area 123 M&L for Disconnection flange of MS pipe and replacement of rubber packing to arrest the leakage of 50mm to 100 mm all as specified and directed 124 Supply and laying or fixing or passing throughpipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed mmnominal cross section inservice connections of 3 core of 10 sqmm stranded conductor type. 125 M&L for Cleaning ,sweeping, ofopen area of STP JRC and furniture yardSump, 42 STP, MH STP, 80 OR STP includingcleaning of installed machinary at both STPs and Cleaning / Cutting of bushes , grass, vegetation trimming of tree branches , surface dressingof STPopen area , Drying Bed, open drain, and removing the wasteoutside the cantonment areaNote : Rate quoted shall deemed to be inclusive of leveling the uneven surface using suitable machine or manually as per ground requirement and spreding weed killerafter cleaning on complete area usingspray machine 126 Taking out of booster pump from foundation/electric motor manually ormachnically and transporting to workshop for repair and back to site incl reinstallation refixing and reconnecting after necessary repair complete all as specified and as directed. Note :- Repair/Replacement of unserviceable parts will be measured and paid under relevent items 127 S&F in repair of Star coupling suitable for 2HP multi stage pump set, complete all as specified and as directed.MAKE:- NE or equivalent as approved by GE 128 S&F in repair of GM impeller for booster pump motor ,3 phase 415 v, 2HP/3HP capacity complete all as specified and as directed. 129 Supply, installing, testingand commissioning Factory made outdoor LT feeder piller box, double door type of suitable size, padestal mounted, CPRI approved totally enclosed, dust and vermin proof, Front and rear openable type made of 3 mm thick CRCA sheet and having proper locking arrangement duly paintedto both internal and External surfaces with super enaleled paint over a coat of red oxide and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising ofthree phase copperbusbarr of current carrying capacity 200 Ampsmounted on angle iron legs of size 50 x 50 x 6 mm x 80 cm long embedded inPCC 1:3:6,including excavation / preparation of ground complete connecting UG cable with cable glands of suitable size Make :SMS Panels and Switch Gears/ Universal switch gears Control and equivalent 130 ( a)3 pole power contactor type ML 4 suitable for operation on,440 Volts, AC, 50 Hz-06 Nos(b) over load protection relaywith relay range 45-75Asuitable for operation on 3 phase, 415 V-02 Nos(c)voltmeter three phase anologue typeclass 1 voltage range 0-500 V flush mounting 96x96mm(d)ammeter three phaseanologue type 5A class 1 ofrange 0-200 A flush mounting 96x96mm inculding CT 200/5(e)MCCB 100A , 25 KA Adjustable type 3 pole for 415V -02 Nos(f) Supply and fix in repair MCCB 200 A capacity 4 pole, 35 KAfor 415V -01Nos(g) indicating lamp on all 3 phases R Y B -01 set(h) PVC insulated multistranded copper conductor single core cable 4 sq mm (Nominal cross sectional area) as per site requirement including suitable size of copper lugs etc all as specified and directed-01 Job(j) single phase preventer direct mounting type with relay range 28-40 A 230 Volts suitable for electric motor of water supply installation-02 Nos(k)Electronic timer type ST 100 suitable for operation on 240/360/415 volts 50 Hz for 3-10 Sec-02 Nos.(l) Automatic phase corrector 131 Supply and fix in repair energy saving and environemntal friendly long life versatile pressure die-cast aluminium IP-65 roadway luminaire 72W LEDfitting with high power LEDs light source and electronic driver etc complete as specified and directed 132 Supply and fix 35 W new generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aestheticallydesigned with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. clear cover offers bright illumination for different applications. 133 S & F in replacement of street light brackets 40 mm bore GI pipe medicum grade upto 1.5 mtr long bend to shape including flat iron clamps and sutable nuts and bolts .etc complete all as specified and directed 134 M&L forshifting and emptying chlorine Gas cylinderof any size and capacityby trained and experience personnel in handling the chlorine gas incl taking all safety measuresandappropriate tools andeqptrequired to safeguard the area and technician while emptying the cylinderand arranging all material and chemicalto neutralize the chlorine gas incase of leakage complete all as specified and directed 135 S&F Bldg Security light energy efficient 1X20 Watt LED 6K Endura cityliner leaf (with Toughned glass) die cast aluminium and fixing arrangement of fitting including 1 mtr 35/50mm GI 90 degree bend pipe complete all as specified. 136 M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plateupto external faceof the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia@ 150 mm c/c both ways with 10 mm dia mild steel bars as in liftinghandle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt). 137 Supply fixing testing and commissioning copper submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 138 All as per item ser no. 137here-in-before but of size 6 Sqmm complete all as specified and directed 139 Supply fixing testing and commissioning submersible cable flat 2.5 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 140 Supply, installation, commissioning and testing in replacement of APFC panel of capacity 40 KVAR (20 KVAR X1,10 KVAR X 1,5 KVAR X 2)powder coated factory made outdoor type of suitable size made ofCRCA sheetmade from min 3.15 mm thick sheet CPRI manufactureswith countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay complete panel prewired with suitable size of copper cable not less than 2.5 sqmm and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, PCC (1:2:4) type C-1 with 20mm graded stone aggregate.Panel comprising with following:- 141 (a) Incoming MCCB 4 pole 100 Amp 16 KA alongwith Spreader terminals with adjustable thermal setting– 01 Nos(b) Multifunctional 4 in 1 meter like Amp,Voltage, frequency, powerfactor as per capacity of panel = 01 No.(c) Phase Indicator Lamp RYB with sheds LED Type - 01 Set of three(d) Capacitor MPPH type with suitable size 3 phase power contactors and with individual 3 pole 415 volt MCBs of suitable capacity including indication lamp of each capacitor.(e) Microprocessor based 3 phase current transformer sencing relay 4 stage = 01 No( for operating of capacitor bank)(f) Auto/Manually switch of capacitor bank(g) PCC 1:2:4 for installation of panel 142 Supply and fixing all in one solar LED street light IP66 with high efficiency mono crystaline solar panel PV module not less than 12V, 25W lithium ferro phosphate battery with in-built BMS technology, capacity 12.8V, 10.5 Ah high efficiency LED 100LM/W, MPPT solar charge controller and aluminium extruded body & is specially programmed to automatically control the dimming and brightness of light, which increase the backup time and minimum 10 Hrs backup. 143 Dismantling and Taking Out old U/S LT Busbar chamber and Supply, installation, Commissioning and testing LT Busbar chamber,size of 600x600x400 mm for 3 phase, 6 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 25mm x 25mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement and including PCC work for fixing panel legsand bus bar of Copper conductor suitable shape and size , 6 No of 200 amps rating including taking out end connectinons of the existing cablesand fixing the cable with the panelusing new lugs and glands of suitable size. 144 Supplying, installing, testing, commissioningofmonoblock Horizontal Filter Feedpumps 5 HP Complete in CI body& CI impeller with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply .Pumps = 02 Nos.(1w + 1s)Flow rate (each)= 20 m³/hrHead = 25 - 30 m 145 Supply and fixing in replacement of non clog type of submersible pump set with motor of capacity 12.5 HP, 415V, 50 Hz, discharge 1000 LPM and head 40 Mtrall as specified and directed by Engr-in-charge.Note:- Old unsv pumpset with motor will be deposited in MES store. 146 Supply & laying/fixing Floor & Trench,3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size:- 147 (a) PN-16, 50 mm OD (SDR– 7.4) 148 (b) PN-16, 32 mm OD (SDR– 7.4) 149 (c) PN-16, 50 mm OD (SDR– 7.4) 150 M&L for repair/rectification of leakage/blockageto water supply distribution lines 50/80mm bore of GI/HDPE/PPR/PVC tubing by necessary excavatio , returning /filling as required , including replacement of,elbow, socket, nipple, D joint, welding as per site requirementas required complete all asdirected. 151 S&F in replacement PPR gate valve (brass insert) of size 50 mm bore including connection and testing complete all as directed. 152 M&L for attendingelect and mechanical breakdownof sewage submersible pump sets, monoblock pump set, Air compressor and electric break downas and when any breakdown occurred .The contractor shall provide the technician within2 hrs after breakdown of Submersible and monloblock pump sets and motor, starter, incase of failure for non attending complaint a penalty of 2000 per compaint will be imposed complete all as directed. Note : Rates quoted shall be inclusive of draining out the collection tank and lifting and lowering pumpset for checking and inspecting the submersible pump set andmaking functional 153 M&L for providing and lowering, connecting submersible pump set 5 to12.5 HP for drainingout the collection tank during the unserviceability of existing pump set including connectingdrain pipe cable etc as per site requirement complete all as directed. 154 Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope / gradient forlaying cables/ pipes etc.all as specified and directed including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed.Note : Excavation shall be made carefully in order to avoid damage of existing cables/pipes and protection covers. 155 Returning, filling in including spreading, leveling, watering and well ramming in layers of25 cm thickafter the cables etc. are laid, jointed & tested complete all as specified and directed 156 Removal of surplus excavated soilexc. 50 mtr butn. exc. 250 mtr distance and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all as directed. 157 Supply and fixing in replacement of PVC suction currugated hose pipe with flanged ends of green colourof bearing capacity 2500 Pa, temperature range 0deg-100deg and velocity 30-40 m/s of foloowing size all as specified and directed by Engr-in-Charge. 158 (a) 50 mm bore 159 (b) 80 mm bore

BRR:8437110 Tender For Provision Of Cctv Surveillance System For Up Gradation Of Maharaja Agarsen Polyclinic To Ayushman Arogya Mandir (Aam) In Ward No. 106 Under West Zone.; 1 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable 2 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable 3 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 3 run of cable 4 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 5 :Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25 MM 6 SITC of 4MP varifocal lens Dome IP Camera with following specifications:-Image Sensor: 1/3 4MP CMOSMinimum Illumination: 0.05 lux color, O luxwith IR or better • *Shutter Speed:1/3 - 1/100,000 sFrame Rate: 20 fps or better**Lens: 3.6 to 10mm Varifocal lens Video Compression: H.265 or better * * S/N Ratio: >45dBResolution: (2650xl440) or better**Protocol: should comply to IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNS, IEEE802.1XIR Range: Minimum 30mOperating Temperature: -20 to 50 deg CentWeatherproof Standard:IP66 or better **Safety standard: UL 7 SITC of 4MP varifocal lens Bullet IP Camera with following specifications:- Image Sensor: 1/3 4MP CMOSMinimum Illumination: 0.05 lux color, 0 lux with lR or better • •Shutter Speed:1/3 -1/ 100,000 sFrame Rate: 20 fps or better **Lens: 3.6 to 10mm Varifocal lensVideo Compression: H.265 or better ••S/N Ratio: >45dBResolution: (2650xl440) or better **Protocol: should comply to IPv4/v6, TCP/IP,HTTP, HTTPS, FTP, PPPoE,DDNS, IEEE802.1XIR Range: Minimum:30mOperating Temperature: -20 to 55 deg CentWeatherproof Standard: IP66 or better **Safety standard: UL 8 SITC of 8 channel NVR with the following specifications:Camera resolution:upto 8MPInterface: 1 HDMI, 1VGA minimumCompression :H.265or better**Network Throughput :80 Mbps or better**USB Port: 2 USB port (USB2.0)minimumHard disk interface: 1 SATA port suitable for 6TB eachProtocol: IPv4/v6, TCP/IP, HTTP, HTTPS, FTP, PPPoE,DDNSOperating temp: -10 to 55 deg CentSafety standard: UL 9 SITC of 8 port Giga PoE switch, 8(PoE 10/100) + 2(10/100) port long distance switch 10 SITC of 6 TB surveillance HDD 11 SITC of full HD LED Monitor,32 INCHES complying with the following specifications:Resolution : Full HD : 1920 x 1080 or betterBacklight : LEDBrightness : 300 NITS min.Contrast : 1200 : 1 or betterPower supply : 230v + / - 10%, 50 Hz at sitewith connections andalong with all accessoriesetc.complete as required. 12 SITC of following rack capacity with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and complete with accessories as reqd.6 U 13 SITC of following rack capacity with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and complete with accessories as reqd.8 U 14 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

BRR:8437101 Tender For Improvement Of Electrical Installations In Ayushman Arogya Mandir At Maternity Home Madipur In Ward 93 Under West Zone Mcd.; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C 2 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A 3 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A 4 Providing and fixing of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 A, 16 KA, TPMCCB 5 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 Way 6 Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flickerfree (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/ 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEMwarranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineerin-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body (Thickness ≥ 1.20 mm)18- 22 watt 7 Supply, Installation, Testing and Commissioning of ceiling fan with BrushLess Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit,safety rope, copper winding, steel/Al body Power Factor not less than 0.9,Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS :374-2019), THD (Total Harmonic Distortion) less than 10%, suitable foroperation with regulator for speed control and all remaining accessoriesincluding safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply,earthing etc. complete as req. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min(Minimum). 8 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 9 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 10 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire 11 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire 12 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 4 sq. mm + 2 X 4 sq. mm earth wire 13 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire 14 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm 15 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) 16 Supply ofXLPE insulated, PVC sheathed Al. conductor Armoured Cable 1.1 KVgrade Conforming to IS 7098of following Sizes. 2x10 sq mm 17 Supply ofXLPE insulated, PVC sheathed Al. conductor Armoured Cable 1.1 KVgrade Conforming to IS 7098of following Sizes. 4*25 sq mm 18 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 19 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 20 Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall splittype Air conditioners complete with Indoor unit(IDU), Out door unit (ODU),surface / concealed copper Refrigerant piping with insulation (closed cellelastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU),copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R407 Green Refrigerant, wireless Remote control, suitable for workingbetween 180-260V with low & high voltage cutoff and 50 hz ,1 phase ACsupply capable of performing cooling, dehumidification, air circulation offollowing capacity with Scroll / rotary compressor. The system shall be ableto deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 yearOriginal Equipment Manufacturer (OEM) warranty both compressor andPrinted Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS9968 temperature sensing control IS /International Electro technicalCommission (IEC) 60730, hermetic compressor IS 10617, heat exchangerIS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWDspecification and IS : 1391 Part II 2023. The system shall be able to operateup to 50 0C (out door ambient temperature). Inverter Type - Cooling only. 1.0 TR with 5 Star BEE Rating 21 Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall splittype Air conditioners complete with Indoor unit(IDU), Out door unit (ODU),surface / concealed copper Refrigerant piping with insulation (closed cellelastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU),copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R407 Green Refrigerant, wireless Remote control, suitable for workingbetween 180-260V with low & high voltage cutoff and 50 hz ,1 phase ACsupply capable of performing cooling, dehumidification, air circulation offollowing capacity with Scroll / rotary compressor. The system shall be ableto deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 yearOriginal Equipment Manufacturer (OEM) warranty both compressor andPrinted Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS9968 temperature sensing control IS /International Electro technicalCommission (IEC) 60730, hermetic compressor IS 10617, heat exchangerIS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWDspecification and IS : 1391 Part II 2023. The system shall be able to operateup to 50 0C (out door ambient temperature). Inverter Type - Cooling only. 1.5 TR with 5 Star BEE Rating 22 S/I/T/C of Stand for Split AC 23 S/I/T/C of copper pipe for split AC 24 S/I/T/C of Drain pipe for split AC 25 S/I/T/C of 3 core, 4 Sqmm Electrical Wire for Air Conditioner 26 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 27 Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) 28 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box forceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/ M.S. sheet box by means of3.3 mm dia round headed screws, one lock at the corners. Clamp shallbe made of 12 mm dia M.S. bar bent to shape as per standard drawing.

BRR:8436902 Annual Rate Contract For Civil And Other Miscellaneous Maintenance Works At Wrpl Beawar And Sendra Station=10 NRECIV0001: Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots a nd polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. 20 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 30 NRECIV0003: Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the a rea clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall b e measured). 40 NRECIV0004: Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water wi th wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete as per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with clea ning powder,paint remover as per requirement all labour, material etc.complete. 50 NRECIV0005: Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, c leaning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with all labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 60 NRECIV0006: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane not exceeding 1.00 sq.m in area 70 NRECIV0007: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane exceeding 1.00 sq.m in area 80 NRECIV0008: Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Exec utive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, segregate the waste into biodegradable & non bio-degradeable waste and finally dispose themseparately at designated place (Dumping Yard/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc . complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to wo rkmen, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engi neer-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepe rately. The unit MONTH (MON) shall mean per house/building per month 90 NRECIV0009: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain upto 2.0 sqm. 100 NRECIV0010: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 2.0 sqm. and upto 4.0 sqm. 110 NRECIV0011: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 4.0 sqm. and upto 10.0 sqm. 120 NRECIV0012: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 10.0 sqm and upto 15.0 sqm. 130 NRECIV0013: Labour charges for cleaning and dechoking of the nahani trap, gully trap and inspection chambers alongwith the CI and S W pipe connection of house drainage including flushing, removal of sludge muck outside all labour, tools etc. complete. The contract or has to clean the line from Nahani trap upto inspection chamber or vice-versa complete. 140 NRECIV0014: Cleaning and removing choking from existing rain water pipe including removing the shoe or grating if necessary & fixin g the same without damaging & fitting of specials all labour etc.complete. Up to 5 mtr. Height 150 NRECIV0015: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth upto 2.0 M 160 NRECIV0016: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 170 NRECIV0017: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 3.0M 180 NRECIV0018: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth upto 2.0 M 190 NRECIV0019: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 200 NRECIV0020: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 3.0M 210 NRECIV0021: Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compres sed air, steaming etc. removal of oily muck outside the chamber completed upto 100M lead. The item includes transportation of all ma chinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. 220 NRECIV0022: Cleaning, dechoking and flushing 100mm/ 50mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sew er cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of the Engineer-in-Charge. 230 NRECIV0025: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Upto a lead of 1 km 240 NRECIV0026: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 1 km but upto 2 km 250 NRECIV0027: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 2 km but upto 3 km 260 NRECIV0028: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Upto a lead of 50 m. 270 NRECIV0029: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. 280 NRECIV0030: Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driv er, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Eng ineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit EACH (EA) stands for tractor days. 290 NRECIV0031: Edging with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, laid dry length wise, including requ ired excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50m. 300 NRECIV0038: Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of th e establishment, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroa ches, mosquitoes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide ba its, glue trays, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trench es upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, c onsumables etc complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when required as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designate d by EIC. Rate is For (PER SQM PER MONTH) 310 NRECIV0039: Lifting, shifting, loading, unloading on of heavy equipment / material etc etc with the help of hydra/crane etc (Min 12T ) including all accessories like belt, sling etc as per directions of EIC/ Site- Engineer. (Unit EA shall mean carrying out abov e activities for 8 hrs. a day). 320 NRECIV0040: Hire and running charges of loader. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 330 PJEALU2634: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubul ar sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM ru bber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever require d including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per arc hitectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separat ely] : 340 PJEALU2636: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 350 PJEALU2637: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 360 PJEALU2638: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 370 PJEALU2639: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixi ng of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for sepa rately] : 380 PJEALU2640: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 390 PJEALU2641: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 400 PJEALU2642: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 410 PJEALU2650: Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, havin g brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cut ting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. : 420 PJEALU2651: With stainless steel cover plate minimum 1.25 mm thickness 430 PJEALU2652: With brass cover plate minimum 1.25 mm thickness 440 PJEALU2685: Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by pr oviding weather/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and dir ections of the Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : 450 PJEALU2686: Up to 5 mm depth and 5 mm width 460 PJEALU2687: Up to 10 mm depth and 10 mm width 470 PJEALU2688: Up to 20 mm depth and 20 mm width 480 PJEALU2689: Providing and fixing, on fixed glazing/ doors/ window panes, sun control film HP NATURAL 35 SAFETY COMBINATION FILM-4Mi l of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturers specification and as per directions of the Engineer-in-Charge. 490 PJECLA0192: Marble work gang saw cut (polished and machine cut) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marb le of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 ceme nt : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment t o match the marble shade [Note: To be secured to the backing by means of cramps, which shall be paid for separately] : 500 PJECLA0193: Area of slab up to 0.50 sqm 510 PJECLA0194: Area of slab over 0.50 sqm 520 PJECLA0195: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 530 PJECLA0196: Area of slab up to 0.50 sqm 540 PJECLA0197: Area of slab over 0.50 sqm 550 PJECLA0198: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone sl ab of colour black, Cherry/Ruby red for kitchen platforms, vanity counters, window sills, facias and similar locations of required s ize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with जोधर्पुर matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 560 PJECLA0199: Area of slab up to 0.50 sqm 570 PJECLA0200: Area of slab over 0.50 sqm 580 PJECLA0201: Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edg e to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge : 590 PJECLA0202: Marble work 600 PJECLA0203: Granite work 610 PJECLA0206: Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete. 620 PJECLA0220: Providing and fixing machine cut, mirror/ eggshell polished Italian Marble stone slab (Perlato, Rosso verona, Fire Red o r Dark Emperadore etc.) of 18 mm thickness for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 c ement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 Kg/sq.m. including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directe d by the Engineer-in-Charge : 630 PJECLA0221: Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional h eight of 3 m or part thereof. 640 PJECLA0222: TILE WORK IN CLADDING : 650 PJECLA0223: Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the ma nufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-i n-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. 660 PJECON0069: CEMENT CONCRETE (CAST IN-SITU) : 670 PJECON0070: Providing and laying in position cement concrete of specified grade at all depths including ramming & shuttering etc. c omplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directio n of Site Engineer: 680 PJECON0071: 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal siz e derived from natural sources] 690 PJECON0072: 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources] 700 PJECON0074: 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size de rived from natural sources] 710 PJECON0078: Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) deriv ed from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] laid to proper level & line incl uding providing shuttering & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per sq uare metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd direction of Site Engineer. 720 PJECON0080: Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal siz e, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specificatio ns and directions of the Engineer-in-Charge. 730 PJECON0082: Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manuf acturers specification. [Note: Unit KG shall mean PER BAG OF 50 KG OF CEMENT]. 740 PJECON0085: Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centerin g, shuttering and finishing: 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 2 0 mm nominal size derived from natural sources] 750 PJECON0087: Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, ancho r blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mort ar 1:3 (1 cement : 3 coarse sand), cost of required centering complete: 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources] 760 PJECON0088: Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] 770 PJEDIS1159: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per th e directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same s hall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : 780 PJEDIS1160: Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 790 PJEDIS1161: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 800 PJEDIS1162: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mat erial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift o nly & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be d one prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] 810 PJEDIS1163: Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mate rial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of n ecessary covers/ barricades around the work area shall be done prior to dismantling operations] 820 PJEDIS1164: Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engine er-in-Charge. [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by th e Engineer-in-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work] 830 PJEDIS1165: Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 840 PJEDIS1166: Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and d isposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall b e allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades aro und the work area shall be done prior to dismantling operations] 850 PJEDIS1168: Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable materi al and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. 860 PJEDIS1171: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc . complete and stacking within 50 metres lead : 870 PJEDIS1172: Of area 3.0 sq. metres and below 880 PJEDIS1173: Of area beyond 3.0 sq. metres 890 PJEDIS1177: Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in : 900 PJEDIS1178: Rolled Steel Joists 910 PJEDIS1179: Channels, angles, tees and flats 920 PJEDIS1181: Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 me tres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantlin g operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge .] 930 PJEDIS1185: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : 940 PJEDIS1186: For thickness of tiles 10 mm to 25 mm 950 PJEDIS1187: For thickness of tiles above 25 mm and up to 40 mm 960 PJEDIS1188: Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unservicea ble material within 50 metres lead. 970 PJEDIS1190: Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable ma terial within 50 metres lead. 980 PJEDIS1191: Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 990 PJEDIS1192: Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : 1000 PJEDIS1193: G.S. Sheet 1010 PJEDIS1194: Asbestos Sheet 1020 PJEDIS1198: Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 1030 PJEDIS1200: Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : 1040 PJEDIS1201: Thickness up to 40 mm 1050 PJEDIS1202: Thickness above 40 mm up to 75 mm 1060 PJEDIS1204: Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres l ead : 1070 PJEDIS1205: 75 to 80 mm dia pipe 1080 PJEDIS1206: 100 mm dia pipe 1090 PJEDIS1207: 150 mm dia pipe 1100 PJEDIS1208: Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable mater ial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift onl y & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be don e prior to dismantling operations.(3) Adequate safety precautions shall also be taken care before commencement of any activity] : 1110 PJEDIS1209: Water Bound Macadam Road 1120 PJEDIS1210: Bituminous Road 1130 PJEDIS1211: Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1140 PJEDIS1212: 15 mm to 40 mm nominal bore 1150 PJEDIS1213: Above 40 mm nominal bore 1160 PJEDIS1214: Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical m eans breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per the directions of Engineer-in-Charge : 1170 PJEDIS1215: Up to 150 mm diameter 1180 PJEDIS1216: Above 150 mm dia up to 300 mm dia 1190 PJEDIS1217: Above 300 mm diameter 1200 PJEDIS1221: Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manual ly/ by mechanical means and stacking the pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1210 PJEDIS1222: Up to 150 mm diameter 1220 PJEDIS1223: Above 150 mm diameter 1230 PJEDIS1224: Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metre s lead as per the directions of Engineer-in-Charge. 1240 PJEDIS1228: Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 1250 PJEDIS1232: Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 1260 PJEDIS1233: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1270 PJEDIS1234: Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservic eable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. 1280 PJEDIS1237: Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved. 1290 PJEDRA2505: Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Kg 1300 PJEDRA2506: Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : 1310 PJEDRA2507: Light Duty-2.5 : 1320 PJEDRA2508: Rectangular shape 600x450 mm internal dimensions 1330 PJEDRA2509: Square shape 450 mm internal dimensions 1340 PJEDRA2510: Circular shape 450 mm internal diameter 1350 PJEDRA2511: Medium Duty-10 : 1360 PJEDRA2512: Square shape 450 mm internal dimensions 1370 PJEDRA2513: Circular shape 500 mm internal diameter 1380 PJEDRA2514: Heavy Duty-20 : 1390 PJEDRA2515: Circular shape 560 mm internal diameter 1400 PJEDRA2516: Extra Heavy Duty-35 : 1410 PJEDRA2517: Circular shape 560 mm internal diameter 1420 PJEDRA2518: Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both si des with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels fo r the drain etc. complete : 1430 PJEDRA2519: For pipes 100 to 250 mm diameter 1440 PJEDRA2520: For pipes 250 to 300 mm diameter 1450 PJEDRA2521: For pipes 350 to 450 mm diameter 1460 PJEDRA2550: Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floor s, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materi als, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 1470 PJEDRA2551: Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure coppe r floats, complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications a nd directions of the Engineer-in-Charge. 1480 PJEDRA2553: Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i ncluding making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat c ement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per s tandard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling , curing etc., as per specifications and directions of the Engineer-in-Charge. 1490 PJEDRA2588: Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL shall mean KILO LITRE] 1500 PJEDRA2589: Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, a ll as per the directions of Engineer-in-Charge. 1510 PJEDRA2590: Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting s ewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including ski lled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking an d flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up t o 300 mm dia for all depth. 1520 PJEEAR0002: Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) i n all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Ch arge. 1530 PJEEAR0004: Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. including filling in sid es of foundation trenches, plinth etc. with the excavated earth available and/or depositing the excess earth within station area l imits, in layers not exceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing to level and grade , complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tion of Site Engineer. 1540 PJEEAR0005: In all kinds of soil 1550 PJEEAR0006: In Ordinary rock 1560 PJEEAR0009: Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractors own borrow areas including royalty, with all leads and lifts in trenches, plinth, sides of foundation etc. including watering, compacting in layers not exceed ing 20cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specif ications and direction of Site Engineer. 1570 PJEEAR0011: Supplying and filling coarse sand under floors, in foundations and plinth including cost-of sand, royalty, transportatio n, loading , unloading, spreading in layers not exceeding 20 cm., watering, ramming, compacting, dressing and levelling etc. compl ete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1580 PJEEAR0013: Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment]. 1590 PJEEAR0014: Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including deli very as specified. 1600 PJEEAR0015: Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 1610 PJEEAR0016: Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : 1620 PJEEAR0017: Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. : 1630 PJEEAR0020: Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based soluti on) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same : 1640 PJEEAR0021: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measu red at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 1650 PJEEAR0022: Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 1660 PJEEAR0023: Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, r emoving the roots and stacking of serviceable material and disposal of unserviceable material : 1670 PJEEAR0024: Beyond 30 cm girth upto and including 60 cm girth 1680 PJEEAR0025: Beyond 60 cm girth upto and including 120 cm girth 1690 PJEEAR0026: Beyond 120 cm girth upto and including 240 cm girth 1700 PJEEAR0027: Above 240 cm girth 1710 PJEEAR0028: Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for a ll lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having dire ctions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] 1720 PJEEAR0030: Excavating trenches by mechinical / manual means of required width in all kinds of soil for pipes, cables, etc. includin g excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and th en returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : 1730 PJEEAR0031: Pipes, cables etc. not exceeding 80 mm dia. 1740 PJEEAR0032: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 1750 PJEEAR0033: Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 1760 PJEEAR0034: Excavating trenches of required width in ordinary rock for pipes, cables, etc. including excavation for sockets, getting out the excavated materials, returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. , stacking servicable materials for measurements and disposal of unservicable materials, all work up to any lead & lift as directed by the Engineer-in-Charge : 1770 PJEEAR0035: Trench depth upto 1.5m : 1780 PJEEAR0036: Pipes, cables etc. not exceeding 80 mm dia 1790 PJEEAR0037: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1800 PJEEAR0038: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1810 PJEEAR0039: Trench depth exceeding 1.5 m but not exceeding 3 m: 1820 PJEEAR0040: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1830 PJEEAR0041: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1840 PJEEAR0042: Trench depth exceeding 3 m but not exceeding 4.5 m: 1850 PJEEAR0043: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1860 PJEEAR0066: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceedin g 20 cm in depth, consolidating each deposited layer by ramming and watering, all works up to any lead and lift 1870 PJEFIN0898: CEMENT PLASTER (IN FINE SAND) : 1880 PJEFIN0899: 12 mm cement plaster of mix : 1890 PJEFIN0900: 1:4 (1 cement : 4 fine sand) 1900 PJEFIN0901: 1:6 (1 cement : 6 fine sand) 1910 PJEFIN0905: 20 mm cement plaster of mix : 1920 PJEFIN0906: 1:4 (1 cement : 4 fine sand) 1930 PJEFIN0907: 1:6 (1 cement : 6 fine sand) 1940 PJEFIN0908: CEMENT PLASTER (IN COARSE SAND) : 1950 PJEFIN0909: 12 mm cement plaster of mix : 1960 PJEFIN0910: 1:4 (1 cement : 4 coarse sand) 1970 PJEFIN0911: 1:6 (1 cement : 6 coarse sand) 1980 PJEFIN0915: 20 mm cement plaster of mix : 1990 PJEFIN0916: 1:4 (1 cement : 4 coarse sand) 2000 PJEFIN0917: 1:6 (1 cement : 6 coarse sand) 2010 PJEFIN0918: CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 2020 PJEFIN0919: 12 mm cement plaster finished with a floating coat of neat cement of mix : 2030 PJEFIN0920: 1:3 (1 cement : 3 fine sand) 2040 PJEFIN0921: 1:4 (1 cement : 4 fine sand) 2050 PJEFIN0925: Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement : 2060 PJEFIN0926: 12 mm cement plaster 2070 PJEFIN0927: 20 mm cement plaster 2080 PJEFIN0942: Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufactu rers [Note: Unit BAG shall mean PER BAG OF 50 KG CEMENT USED IN THE MIX). 2090 PJEFIN0943: Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or par t thereof. 2100 PJEFIN0944: Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and s mooth complete. 2110 PJEFIN0945: Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Colum ns/ Beams brickwork as directed by the Engineer-in-Charge. 2120 PJEFIN0963: Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved ma nufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and inc luding water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2130 PJEFIN0964: EXTERIOR FINISHING : 2140 PJEFIN0965: Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 Kg/10 sq m) 2150 PJEFIN0966: Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 2160 PJEFIN0967: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2170 PJEFIN0968: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2180 PJEFIN0969: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifica tions : 2190 PJEFIN0970: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm 2200 PJEFIN0971: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. 2210 PJEFIN0972: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm ov er an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. 2220 PJEFIN0973: Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon ad ditives: New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 2230 PJEFIN0974: Applying priming coat : 2240 PJEFIN0975: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 2250 PJEFIN0976: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2260 PJEFIN0977: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 2270 PJEFIN0978: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specification s including appropriate priming coat, preparation of surface, etc. complete : 2280 PJEFIN0979: On steel work 2290 PJEFIN0980: On concrete work 2300 PJEFIN0981: Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 2310 PJEFIN0982: 75 mm diameter pipes 2320 PJEFIN0983: 100 mm diameter pipes 2330 PJEFIN0984: 150 mm diameter pipes 2340 PJEFIN0985: Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats) 2350 PJEFIN0986: Providing and applying two coats of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat inclu ding preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 2360 PJEFIN0987: Coal tarring two coats on new work using 0.16 Litre and 0.12 Litre coal tar per sqm in the first coat and second coat re spectively. 2370 PJEFIN0988: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2380 PJEFIN0989: Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2390 PJEFIN0990: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or mor e coats on new work 2400 PJEFIN0991: Varnishing with varnish of approved brand and manufacture : 2410 PJEFIN0992: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 2420 PJEFIN0993: Two or more coats glue sizing with spar varnish or an under coat of flatting varnish 2430 PJEFIN0996: Lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HEIGH T]. 2440 PJEFIN0997: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2450 PJEFIN0998: Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litr e, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Old work (one or more coats) 2460 PJEFIN0999: Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : 2470 PJEFIN1000: One coat 2480 PJEFIN1001: Two coats 2490 PJEFIN1002: Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : 2500 PJEFIN1003: One coat 2510 PJEFIN1004: Two coats 2520 PJEFIN1005: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : 2530 PJEFIN1006: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 2540 PJEFIN1007: With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. 2550 PJEFIN1008: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair s to scratches etc. complete. 2560 PJEFIN1009: Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2570 PJEFIN1010: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 2580 PJEFIN1011: 75 mm diameter pipes 2590 PJEFIN1012: 100 mm diameter pipes 2600 PJEFIN1013: 150 mm diameter pipes 2610 PJEFIN1014: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of appro ved brand and manufacture and required colour on old work : 2620 PJEFIN1015: 75 mm diameter pipes 2630 PJEFIN1016: 100 mm diameter pipes 2640 PJEFIN1017: 150 mm diameter pipes 2650 PJEFIN1018: Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats) 2660 PJEFIN1019: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 2670 PJEFIN1020: Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work 2680 PJEFIN1021: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or mor e coats on old work 2690 PJEFIN1022: French spirit polishing : One or more coats on old work 2700 PJEFIN1023: Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work 2710 PJEFIN1024: Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HE IGHT]. 2720 PJEFIN1025: Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 2730 PJEFIN1026: Finishing walls with water proofing cement paint of required shade : 2740 PJEFIN1027: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete i ncluding cost of Priming coat. 2750 PJEFIN1028: Old work (one or more coats applied @ 2.20 kg/10 sqm) complete. 2760 PJEFIN1029: Finishing walls with textured exterior paint of required shade 2770 PJEFIN1030: Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 2780 PJEFIN1031: Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 2790 PJEFIN1032: Finishing walls with Acrylic Smooth exterior paint of required shade : 2800 PJEFIN1033: Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface. 2810 PJEFIN1034: Old work (One or more coat applied @ 0.90 ltr/10 sqm) 2820 PJEFIN1035: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 2830 PJEFIN1036: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 2840 PJEFIN1037: Old work (one or more coats applied @ 0.83 ltr/10 sqm) 2850 PJEFIN1038: Varnishing with varnish of approved brand and manufacture : 2860 PJEFIN1039: One or more coats with copal varnish 2870 PJEFIN1040: One or more coats with spar varnish 2880 PJEFIN1041: Melamine polishing on wood work (one or more coat). 2890 PJEFIN1042: Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 2900 PJEFIN1043: Providing Plaster of Paris coating on ceiling as per approved design complete in all respects inclusive of cost of all l abour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 2910 PJEFLO0706: FLOORING : 2920 PJEFLO0707: Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar, including filling the joint s with same mortar, with common burnt clay non modular bricks : 2930 PJEFLO0708: 1:4 (1 cement : 4 coarse sand) 2940 PJEFLO0709: 1:6 (1 cement : 6 coarse sand) 2950 PJEFLO0710: Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, includ ing filling joints with sand, with common burnt clay non modular bricks. 2960 PJEFLO0711: Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class desig nation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 2970 PJEFLO0712: Providing and laying cement concrete flooring 25 mm thick of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreg ates 12.5 mm nominal thickness), laid monolithically over base of concrete in panels at all locations and heights including treads o f steps, nosing, landing slab etc. and finished with a floating coat of neat cement @ 2.20 Kg of cement per sqm of flooring, supplyi ng and fixing 1.5 mm thick aluminium strips for full depth, chequering in floor finish if required, rounding, sloping, curing, finis hing, preparation of slab, steps, etc., complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for base concrete shall be made under relevant item]. 2980 PJEFLO0713: 40 mm thick cement concrete Flooring with P.C.C. of grade mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of step s etc. complete : 2990 PJEFLO0714: Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener c onsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 li tre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosi ng of steps etc. complete. 3000 PJEFLO0715: 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cemen t or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. comple te. 3010 PJEFLO0716: Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick ceme nt concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic con crete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compoun d such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of met allic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge. 3020 PJEFLO0722: TILE FLOORING : 3030 PJEFLO0723: Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : 3040 PJEFLO0724: Light shade pigment using white cement 3050 PJEFLO0725: Medium shade pigment using 50% white cement 50% Grey cement 3060 PJEFLO0726: Dark shade pigment using ordinary cement 3070 PJEFLO0727: Ordinary cement without any pigment 3080 PJEFLO0728: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali r esisting mortar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcation s and directions of the Engineer-in-Charge : 3090 PJEFLO0729: In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3100 PJEFLO0730: In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3110 PJEFLO0731: MARBLE STONE FLOORING : 3120 PJEFLO0732: Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by the Engineer-in-Charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 3130 PJEFLO0733: Makrana White Second Quality 3140 PJEFLO0734: Raj Nagar Plain 3150 PJEFLO0735: Agaria White 3160 PJEFLO0736: Black Zebra 3170 PJEFLO0737: Udaipur Green Marble 3180 PJEFLO0738: Pink Plain Marble 3190 PJEFLO0742: Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab (Perlato, Rosso verona, Fire Re d or Dark Emperadore, etc.) flooring laid in required pattern in linear portion of the building all complete as per architectural dr awings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jo inted with white cement slurry @ 4.4 Kg/sq.m., including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 3200 PJEFLO0743: Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstrac t etc.) and in patterns in combination with Italian marble stone slabs (Perlato, Rosso verona, Fire Red or Dark Emperadore, etc.) of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectu ral drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 Kg/sq.m. including pointing with white cement slurry admixed with pigment to match the ma rble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 3210 PJEFLO0744: Providing and laying natural Rajnagar White Marble tile strips 50 mm wide in flooring/ stairs laid over 20 mm thick ceme nt mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per d rawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3220 PJEFLO0745: GRANITE STONE FLOORING : 3230 PJEFLO0746: Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) floori ng in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointe d with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and poli shing etc. all complete as specified and as directed by the Engineer-in-Charge. 3240 PJEFLO0747: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear p ortions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base o f cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed wit h pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer- in-Charge. 3250 PJEFLO0748: Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 3260 PJEFLO0749: Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red 3270 PJEFLO0750: Providing and laying natural granite stone tile strips 50 mm wide in flooring of approved shade laid over 20 mm thick ce ment mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3280 PJEFLO0761: VITRIFIED FLOOR TILES : 3290 PJEFLO0762: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mort ar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement a nd matching pigments etc., complete : 3300 PJEFLO0763: Size of Tile 500x500 mm 3310 PJEFLO0764: Size of Tile 600x600 mm 3320 PJEFLO0765: Size of Tile 800x800 mm 3330 PJEFLO0766: Size of Tile 1000x1000 mm 3340 PJEFLO0767: Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, includin g grouting of joints. [Note: Payment for grouting of joints shall be made separately] : 3350 PJEFLO0768: Size of Tile 500x500 mm 3360 PJEFLO0769: Size of Tile 600x600 mm 3370 PJEFLO0770: Size of Tile 800x800 mm 3380 PJEFLO0771: Size of Tile 1000x1000 mm 3390 PJEFLO0772: Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by th e Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours an d shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. L aying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3400 PJEFLO0773: Size of Tile 600 x 600 mm 3410 PJEFLO0774: Size of Tile 600 x 1200 mm 3420 PJEFLO0775: Size of Tile 800 x 800 mm 3430 PJEFLO0776: Size of Tile 800 x 1600 mm 3440 PJEFLO0777: Size of Tile 1000 x 1000 mm 3450 PJEFLO0778: Providing and laying Glazed Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manuf acturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shade s, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including groutin g the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying o f tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placin g the tiles gently and easily : 3460 PJEFLO0779: Size of Tile 600 x 600 mm 3470 PJEFLO0780: Size of Tile 600 x 1200 mm 3480 PJEFLO0781: Size of Tile 800 x 800 mm 3490 PJEFLO0782: Size of Tile 800 x 1200 mm 3500 PJEFLO0783: Size of Tile 1200 x 1200 mm 3510 PJEFLO0784: Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including g routing the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. La ying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3520 PJEFLO0785: Size of Tile 600 x 600 mm 3530 PJEFLO0786: Size of Tile 600 x 1200 mm 3540 PJEFLO0787: Size of Tile 800 x 800 mm 3550 PJEFLO0788: Size of Tile 800 x 1200 mm 3560 PJEFLO0789: Size of Tile 1200 x 1200 mm 3570 PJEFLO0790: Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorpti on less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm th ick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : 3580 PJEFLO0791: Size of Tile 500x500 mm 3590 PJEFLO0792: Size of Tile 600x600 mm 3600 PJEFLO0793: Size of Tile 800x800 mm 3610 PJEFLO0794: Size of Tile 1000x1000 mm 3620 PJEGEN2809: GENERAL WORKS : 3630 PJEGEN2816: Supply, installation, testing & commissioning of Turbo Roof Air Ventilators of Fan Size- 24 inch (neck/ throat dia.), Ve ntilator Diameter- 30 inch, Ventilator Base (FRP)- standard width 1.8m x dome height 750mm, Opening for ventilation dome- 860mm x 68 0mm x 608mm, thickness 2mm etc. complete in all respects and as per specifications and directions of the Engineer-in-Charge. 3640 PJEGEN2821: Providing and erecting 2.0 metre high temporary barricading at site; each panel of size 2.5m x 2.0m made of 40x40x6mm an gle iron or 50x50x3mm hollow MS tube posts/ horizontal members/ bracings covered with 1.63mm thick MS Sheet. The steel shall be fixe d with 30x5mm MS flat by suitable welding/ riveting. The panels shall be made so that gap of 50cm above the ground is available maki ng overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of E ngineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The ba rricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for da mages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be r emoved without prior approval of the Engineer-in-Charge. [Note: One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on co mpletion of the work]. 3650 PJEGEN2824: Providing and laying Non-Woven Geo Textile Mat NW 300 made from high quality polypropylene fibres having mass of 300 gra ms/ SQ.M of GAYATRI or approved equivalent make inclusive of cost of all labour, materials, tools, tackles etc. as per manufacturer s recommendations and directions of the Engineer-in-Charge. 3660 PJEHOR2827: HORTICULTURE & LANDSCAPING : 3670 PJEHOR2828: Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of ea rth measured in stacks will be reduced by 20% for payment]. 3680 PJEHOR2829: Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge me asured in stacks will be reduced by 8% for payment]. 3690 PJEHOR2830: Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [No te: Volume of cattle manure measured in stacks will reduced by 8% for payment]. 3700 PJEHOR2835: Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 3710 PJEHOR2836: Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material , consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. 3720 PJEHOR2837: Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [ Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR]. 3730 PJEHOR2838: Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then dispo sing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by fi lling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. 3740 PJEHOR2839: Rough dressing the trenched ground including breaking clods. 3750 PJEHOR2840: Flooding the ground with water including making kiaries and dismantling the same. 3760 PJEHOR2841: Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted veg etation. 3770 PJEHOR2844: Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with ro ots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 3780 PJEHOR2845: Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further dep th of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of sta cked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with w ater, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of material s declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Cost of sludge, manure or extra earth shall be paid for separately under relevant item of SOR]. 3790 PJEHOR2846: Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of m anure, sludge or extra good earth if needed shall be paid separately under relevant item of SOR]. 3800 PJEHOR2847: Holes 1.2 m diameter and 1.2 m deep 3810 PJEHOR2848: Holes 90 cm diameter and 90 cm deep 3820 PJEHOR2849: Holes 60 cm diameter and 60 cm deep 3830 PJEHOR2850: Holes 45 cm diameter and 45 cm deep 3840 PJEHOR2851: Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green includin g loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. 3850 PJEHOR2852: Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the gr ass forms a thick lawn, free from weeds and fit for mowing including supply and filling of good earth, if required during maintenanc e period. [Note: The grass and good earth shall be paid for separately under relevant item of SOR] : 3860 PJEHOR2853: In rows 5 cm apart in both directions 3870 PJEHOR2854: With grass Turf 3880 PJEHOR2855: Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with pro per level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the En gineer-in-Charge. 3890 PJEHOR2856: Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light wate ring the same maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge . 3900 PJEHOR2857: Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per directio n of the Engineer-in-Charge (excluding cost of plant & water): 3910 PJEHOR2858: Tree Plant 3920 PJEHOR2859: Shrub Plant 3930 PJEHOR2860: Hedge Plant/ Ground Cover 3940 PJEHOR2861: Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, As hokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days min imum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions o f the Engineer-in-Charge. 3950 PJEHOR2862: Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 c oarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wi res of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specifie d period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge. 3960 PJEHOR2863: Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm 3970 PJEHOR2864: Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm 3980 PJEHOR2873: Filling of the Polythene bags by mixture of good earth and manure in the ratio of 2:1 (2 part of Good Earth and 1 part o f the Manure) and placing the same at appropriate place including supply & providing Polythene bags, all complete as per direction o f the Engineer-in-Charge. [Note:The Good Earth & Manure shall be paid separately under relevant item of SOR]. 3990 PJEHOR2874: Polythene bags size 12.5 cm diameter & 17.5 cm height 4000 PJEHOR2890: Edging with common burnt clay F.P.S (non modular) bricks of class designation 7.5, laid dry length wise including requir ed excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within any lead. 4010 PJEHOR2894: Providing & fixing of White River (Stone) Pebbles size of 2 to 2.50 dia in natural colour at site of work including lo ading, unloading, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. 4020 PJEHOR2895: Providing and fixing of TUFLEX Garden Fencing Hexagonal Net or approved equivalent of green colour (Weight 510 (+/-8%) g rams/SQ.M) in width of 60 cm with bamboo of 90 cm length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm below ground level and 60 cm above ground level at a distance of 1.50 metres. The n et and bamboo should be binded with 2 mm G.I. wire at three places properly as per directions of the Engineer-in-Charge. 4030 PJEHOR2896: MAINTENANCE WORKS 4040 PJEHOR2897: Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing t he same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds an d fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or m anure. [Note: The good earth shall be paid for separately under relevant item of SOR]. 4050 PJEHOR2898: Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and a pplying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4060 PJEHOR2899: Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manur ing and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Ch arge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4070 PJEHOR2903: Pruning, trimming, shaping of trees/ shrubs (height 15 feet above) and removal of cut materials up to 50m lead inclusi ve of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 4080 PJEHOR2904: Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation water at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering inclu ding cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 4090 PJEHOR2905: Anti-termite treatment of trees by digging holes 30 cm deep & 4 cm dia, 6 to 7 holes around the tree using chemical emul sion (Chlorpyriphos 20% EC in the ratio of 1% concentration) at the rate of 1.5 liter per hole in two time or more application to ge t the trees free from termite infection, complete as per directions of the Engineer-in-Charge. [Note: Unit EA shall mean EACH TRE E]. 4100 PJEHOR2908: Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, deb ris, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per dire ction of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 4110 PJEHOR2909: Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km l ead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP] . 4120 PJEMAS0143: MASONRY WORK : 4130 PJEMAS0144: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : 4140 PJEMAS0145: Cement mortar 1:4 (1 cement : 4 coarse sand) 4150 PJEMAS0146: Cement mortar 1:6 (1 cement : 6 coarse sand) 4160 PJEMAS0147: Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : 4170 PJEMAS0148: Cement mortar 1:4 (1 cement : 4 coarse sand) 4180 PJEMAS0149: Cement Mortar 1:6 (1 cement : 6 coarse sand) 4190 PJEMAS0150: Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth le vel up to floor V level in all shapes and sizes in : 4200 PJEMAS0151: Cement mortar 1:4 (1 cement : 4 coarse sand) 4210 PJEMAS0152: Cement mortar 1:6 (1 cement : 6 coarse sand) 4220 PJERAI2738: Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required th ickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4230 PJERAI2739: Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing lay er of boulders, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4240 PJERAI2740: Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4250 PJERAI2742: Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, o f size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all a s per directions of the Engineer-in-Charge. 4260 PJEREI0090: RCC (CAST IN-SITU) : 4270 PJEREI0091: Providing and laying structural reinforced cement concrete work (1:1.5:3) conforming to IS:456 (1 cement : 1.5 coarse sa nd : 3 graded stone aggregate 20 mm nominal size) at all heights and depth for construction of foundations, beams, columns, stairca ses, chajja,lintels, balconies, shelves, plain window sills, roof slabs, facia, canopies, fins, porch, water tank etc. including pro viding centering, shuttering, staging, scaffolding, form work etc compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engin eer. (Payment for Reinforcement shall be made as per relevant item of SOR). 4280 PJEREI0092: a) All work up to plinth level 4290 PJEREI0093: b) In superstructure at all floors up to floor five level, 4300 PJEREI0106: Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutti ng, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more 4310 PJEREP1046: Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper sha pe, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable are a outside Ownders premises, all complete as per directions of the Engineer-in-Charge : 4320 PJEREP1047: With cement mortar 1:4 (1 cement : 4 fine sand) 4330 PJEREP1048: With cement mortar 1:4 (1 cement : 4 coarse sand) 4340 PJEREP1103: Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube ch allies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condi tion for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runn ers, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shal l be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be use d for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] 4350 PJEREP1108: Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per the directions of Engineer-in-Charge. 4360 PJEREP1109: Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per the dir ections of Engineer-in-Charge. 4370 PJEREP1113: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer o f membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/3 00 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C . (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane. 4380 PJEREP1114: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 l itre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physic al and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C a s 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less tha n 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got d one through the authorised applicator of the manufacturer of membrane. 4390 PJEREP1115: Extra for covering top of membrane with Geotextile, 120 GSM non woven, 100% polyester of thickness 1 to 1.25 mm bonded t o the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 4400 PJEREP1116: STRUCTURAL REPAIR WORKS : 4410 PJEREP1117: Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning t he exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as p er directions of the Engineer-in-Charge : 4420 PJEREP1118: 75 mm average thickness 4430 PJEREP1119: 50 mm average thickness 4440 PJEREP1120: 25 mm average thickness 4450 PJEREP1121: Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkali ne chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per directions of the Engineer-in-Charge : 4460 PJEREP1122: Bars up to 12 mm diameter 4470 PJEREP1123: Bars above 12 mm diameter 4480 PJEREP1124: Providing and applying anticorrosive treatment to exposed structural reinforcement with two coats of IPNET RB or equival ent with time interval of minimum 8-10 hours between each coat after the application of two coats of alkaline rust converting primer . The application shall be done by brush after cleaning existing reinforecement with wire/ rotary wire brush to make the surface fre e from loose material, dirt etc. and thoroughly washing with water and allowing it to dry inclusive of all materials, labour, equipm ent, etc. complete as per specifications and directions of the Engineer-in-Charge. The application of anticorrosive treatment shall be strictly as per technical specifications and directions of the Engineer-in-Charge. [Note: Unit M shall mean RUNNING METRE. Th e running metre of rebars shall be measured for payment purpose]. 4490 PJEREP1125: Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the stee l bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per dire ctions of the Engineer-in-Charge : Up to and including 12 mm diameter 4500 PJEREP1126: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and dir ections of the Engineer-in-Charge complete in all respect : 4510 PJEREP1127: SBR Polymer (@ 10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. 4520 PJEREP1128: Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. 4530 PJEREP1129: Providing, mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 g raded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of the Engineer-in-Charge. [No te: Measurement and Payment- The pre-measurement of thickness shall be done just after the surface preparation is completed and paym ent under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by soundi ng/ tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/sq.mm] : 4540 PJEREP1130: 12 mm average thickness. 4550 PJEREP1131: 25 mm average thickness in 2 layers. 4560 PJEREP1132: 50 mm average thickness in 3 layers. 4570 PJEREP1140: Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of con crete/ masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engineer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : 4580 PJEREP1141: Stirrer mixed Acrylic Polymer of approved make (@ 2% of weight of cement used) modified cement slurry made with non shri nk compound in Concrete/ RCC work. 4590 PJEREP1142: Stirrer mixed SBR Polymer (of approved make) modified cement slurry made with Shrinkage Compensating Cement in Concrete/ RCC work. 4600 PJEREP1143: Epoxy injection grout in Concrete/ RCC work of approved make. 4610 PJEROA1249: Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand pic king, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required de nsity. 4620 PJEROA1250: SURFACE DRESSING : 4630 PJEROA1251: Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25 Kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete. 4640 PJEROA1252: Surface dressing on new surface in two coats with bitumen of grade VG-10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. 4650 PJEROA1253: Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm wit h 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity, etc. complete. 4660 PJEROA1254: Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 Kg/sqm of surface area with 1 .5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete :Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4670 PJEROA1255: Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area wit h 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity etc. complete : Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4680 PJEROA1285: SEAL COAT : 4690 PJEROA1286: Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitume n using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surfac e, including rolling and finishing with road roller all complete. [Note: This item to be operated only with the prior approval of th e Engineer-in-Charge]. 4700 PJEROA1298: PAINTING AREA / RUNWAY MARKING : 4710 PJEROA1299: Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conf orming to IS:164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete 4720 PJEROA1300: New work (Two or more coats) 4730 PJEROA1301: Old work (One or more coats) 4740 PJEROA1309: Providing and fixing Glow Studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylore trite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by the Engineer-in-Charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope o f retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as re commended in BS: 873 (Part-4):1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedu re recommended by the manufacturer complete and as per directions of the Engineer-in-Charge. 4750 PJEROA1315: Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermopl astic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, prop ane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cle aning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charg e and accordance with applicable specifications. 4760 PJEROA1359: Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material withi n 50 metre lead as per directions of the Engineer-in-Charge. 4770 PJEROA1360: Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., dispos al of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. 4780 PJEROA1361: Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost]. 4790 PJEROA1362: Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, joint ed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except a t sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be suppl ied by the department free of cost.] 4800 PJEROO0824: THERMAL INSULATION: 4810 PJEROO0825: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS:8183, density 24 kg/cu.m., 50mm thick, wrapped in 200G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. 4820 PJEROO0826: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183, Density 16 Kg/cu.m., 5 0 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing G.I. wir e. 4830 PJEROO0827: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183 having density 24 Kg/cu .m., 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing G.I. wire etc. complete as per directions of the Engineer-in-Charge. 4840 PJEROO0828: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8 183, density 48 Kg/cu.m., 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 Gauge wire mesh, for top most ceiling of building. 4850 PJEROO0872: FALSE CEILING : 4860 PJEROO0873: Providing and fixing tiled false ceiling of specified materials size 595x595 mm in true horizontal level, suspended o n inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, sp aced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between m ain T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of siz e 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for servi like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods w ith galvanised butterfly level clips size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings a nd as directed by the Engineer-in-Charge : 4870 PJEROO0874: G.I. Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm dro p; made of G. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and electro-statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 4880 PJEROO0875: G.I. Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made G.I. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and 20% perforation area with 1.8 mm dia. holes and having NRC (Noise Reduction Coefficient) of 0.5, electro-statically polyester powder coated thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 4890 PJEROO0876: 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from n atural gypsum as per IS:2095 (Part-1) and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 4900 PJEROO0877: 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 (Part-1 ), of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm center to center with center borders of 48 mm and the side border s of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bon ded glass wool backing. 4910 PJESAN1368: SANITARY INSTALLATIONS : 4920 PJESAN1369: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 l itre low level white P.V.C. dual flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming t o IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 4930 PJESAN1370: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litr e low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:72 31, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 4940 PJESAN1371: W.C. pan with ISI marked white solid plastic seat and lid. 4950 PJESAN1373: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low lev el white vitreous china dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangemen t with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings a nd brackets, cutting and making good the walls and floors wherever required : 4960 PJESAN1374: W.C. pan with ISI marked white solid plastic seat and lid 4970 PJESAN1376: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union s and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requir ed : 4980 PJESAN1377: One urinal basin with 5 litre white P.V.C. automatic flushing cistern 4990 PJESAN1378: Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 5000 PJESAN1379: Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 5010 PJESAN1391: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pat tern, including painting of fittings and brackets, cutting and making good the walls wherever require : 5020 PJESAN1392: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 5030 PJESAN1407: Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 5040 PJESAN1408: Kitchen sink with drain board : 5050 PJESAN1409: 510x1040 mm bowl depth 250 mm 5060 PJESAN1410: 510x1040 mm bowl depth 225 mm 5070 PJESAN1411: 510x1040 mm bowl depth 200 mm 5080 PJESAN1412: 510x1040 mm bowl depth 178 mm 5090 PJESAN1457: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : 5100 PJESAN1466: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick har d board ground fixed to wooden cleats with C.P. brass screws and washers complete. 5110 PJESAN1473: Providing and fixing toilet paper holder : 5120 PJESAN1474: C.P. Brass 5130 PJESAN1665: Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : 5140 PJESAN1666: Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 5150 PJESAN1667: Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. 5160 PJESAN1668: Providing and fixing PTMT Bottle Trap for Wash basin and sink : 5170 PJESAN1669: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 5180 PJESAN1670: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. 5190 PJESAN1671: Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5200 PJESAN1672: Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wal l face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 5210 PJESAN1673: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed f ittings arrangement of approved quality and colour : 5220 PJESAN1674: 450 mm long towel rail with total length of 495 mm, 78 mm width and effective height of 88 mm, weighing not less than 17 0 gms. 5230 PJESAN1675: 600 mm long towel rail with total length of 645 mm, 78 mm width and effective height of 88 mm, weighing not less than 19 0 gms. 5240 PJESTE0618: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, lock ing arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 5250 PJESTE0619: Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respe ctively, including applying a priming coat of approved steel primer. 5260 PJESTE0623: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through t heir entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing n ecessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top cover of required thickness for rolling shutters : 5270 PJESTE0624: 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover 5280 PJESTE0627: Providing and fixing ball bearing for rolling shutters. 5290 PJESTE0628: Extra for providing mechanical device chain and crank operation for operating rolling shutters : 5300 PJESTE0629: Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area 5310 PJESTE0630: Exceeding 16.80 sq.m. in area 5320 PJESTE0664: Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase rail ing and similar works, including applying priming coat of approved steel primer : 5330 PJESTE0665: M.S. Tube 5340 PJESTE0666: E.R.W. Tubes 5350 PJESTE0667: G.I. Pipes 5360 PJESTE0674: Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. , of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-C harge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nu ts, bolts, fasteners etc.] 5370 PJESTE0675: Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts c omplete : 5380 PJESTE0676: Galvanised M.S. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. 5390 PJESTE0677: Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 5400 PJESTE0687: Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the bo dy of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects i nclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Cha rge. 5410 PJESTE0690: Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provis ion for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawing s, specifications and directions of the Engineer-in-Charge. 5420 PJESTE0691: Supplying & fixing Pigeon Protection net of mesh 15 mm x 15 mm & Gauge SW14 in sheds including specials required for bol ting with tie members of truss, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer comp lete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction o f the Engineer-in-Charge. 5430 PJESTE0698: G.I. Barbed Wire Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizon tal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 Kg/100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. [Notes: (1) Cost of posts, struts, earth work and concrete work to be paid for separately. (2) Payment to be made per metre cost of total length of barbed wire used]. 5440 PJESTE0704: Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diamet er made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating th ickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched al l along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thick ness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficien tly at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the cl osed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles et c. as per drawings, specifications and directions of the Engineer-in-Charge. 5450 PJESTE0705: Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (tota l length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron Y shaped placed 2.4 m o r 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the directions of Engineer-in-Charge, with re inforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre. [Note: Cost of M.S. angle, C.C. blocks shall be paid separately]. 5460 PJESTO0175: STONE WORK : 5470 PJESTO0176: RANDOM RUBBLE MASONRY : 5480 PJESTO0177: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cem ent : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5490 PJESTO0178: Cement mortar 1:6 (1 cement : 6 coarse sand) 5500 PJESTO0179: Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling l evel and the like. 5510 PJESTO0180: Cement mortar 1:6 (1 cement : 6 coarse sand) 5520 PJEWAT1698: WATER SUPPLY : 5530 PJEWAT1699: CPVC PIPES : 5540 PJEWAT1700: Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabil ity for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directi ons of the Engineer-in-Charge : 5550 PJEWAT1701: 15 mm nominal outer dia pipes 5560 PJEWAT1702: 20 mm nominal outer dia pipes 5570 PJEWAT1703: 25 mm nominal outer dia pipes 5580 PJEWAT1704: 32 mm nominal outer dia pipes 5590 PJEWAT1705: 40 mm nominal outer dia pipes 5600 PJEWAT1706: 50 mm nominal outer dia pipes 5610 PJEWAT1707: Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stab ility for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spa cing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good th e same including testing of joints complete as per directions of the Engineer-in-Charge : 5620 PJEWAT1708: 15 mm nominal dia pipes 5630 PJEWAT1709: 20 mm nominal dia pipes 5640 PJEWAT1710: 25 mm nominal dia pipes 5650 PJEWAT1711: 32 mm nominal dia pipes 5660 PJEWAT1712: External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solve nt cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge : 5670 PJEWAT1713: 15 mm nominal dia pipes 5680 PJEWAT1714: 20 mm nominal dia pipes 5690 PJEWAT1715: 25 mm nominal dia pipes 5700 PJEWAT1716: 32 mm nominal dia pipes 5710 PJEWAT1717: 40 mm nominal dia pipes 5720 PJEWAT1718: 50 mm nominal dia pipes 5730 PJEWAT1719: 65 mm nominal dia pipes 5740 PJEWAT1720: 80 mm nominal dia pipes 5750 PJEWAT1721: 100 mm nominal dia pipes 5760 PJEWAT1722: 150 mm nominal dia pipes 5770 PJEWAT1723: G.I. PIPES : 5780 PJEWAT1724: Internal Work - Exposed on Wall: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutti ng and making good the walls etc. : 5790 PJEWAT1725: 15 mm dia nominal bore 5800 PJEWAT1726: 20 mm dia nominal bore 5810 PJEWAT1727: 25 mm dia nominal bore 5820 PJEWAT1728: 32 mm dia nominal bore 5830 PJEWAT1729: 40 mm dia nominal bore 5840 PJEWAT1730: 50 mm dia nominal bore 5850 PJEWAT1731: Internal Work - Concealed in wall: Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including mak ing good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall : 5860 PJEWAT1732: 15 mm dia nominal bore 5870 PJEWAT1733: 20 mm dia nominal bore 5880 PJEWAT1734: External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 5890 PJEWAT1735: 15 mm dia nominal bore 5900 PJEWAT1736: 20 mm dia nominal bore 5910 PJEWAT1737: 25 mm dia nominal bore 5920 PJEWAT1738: 32 mm dia nominal bore 5930 PJEWAT1739: 40 mm dia nominal bore 5940 PJEWAT1740: 50 mm dia nominal bore 5950 PJEWAT1741: 65 mm dia nominal bore 5960 PJEWAT1742: 80 mm dia nominal bore 5970 PJEWAT1743: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including c utting and threading the pipe etc. complete : 5980 PJEWAT1744: 25 to 40 mm nominal bore 5990 PJEWAT1745: 50 to 80 mm nominal bore 6000 PJEWAT1746: Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete. [Note: Cost of water meter and stop cock to be paid separately]. 6010 PJEWAT1799: BRASS FITTINGS : 6020 PJEWAT1800: Providing and fixing brass bib cock of approved quality : 6030 PJEWAT1801: 15 mm nominal bore 6040 PJEWAT1802: 20 mm nominal bore 6050 PJEWAT1803: Providing and fixing brass stop cock of approved quality : 6060 PJEWAT1804: 15 mm nominal bore 6070 PJEWAT1805: 20 mm nominal bore 6080 PJEWAT1806: Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 6090 PJEWAT1807: 20 mm nominal bore 6100 PJEWAT1808: 25 mm nominal bore 6110 PJEWAT1809: 32 mm nominal bore 6120 PJEWAT1810: 40 mm nominal bore 6130 PJEWAT1811: 50 mm nominal bore 6140 PJEWAT1812: 65 mm nominal bore 6150 PJEWAT1813: 80 mm nominal bore 6160 PJEWAT1971: C.P. BRASS FITTINGS : 6170 PJEWAT1972: Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 : 15 mm nominal bore 6180 PJEWAT1973: Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore 6190 PJEWAT1974: Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore 6200 PJEWAT1975: Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 : 15 mm nominal bore 6210 PJEWAT1976: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore 6220 PJEWAT1977: Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per directions of th e Engineer-in-Charge. 6230 PJEWAT1978: Providing and fixing following C.P. Brass central hole wash basin mixer with copper pipe/ pipes and brass nuts of size 1 5mm, etc. complete including cutting & making good the walls wherever required complete in all respects as per specifications and di rections of the Engineer-in-Charge : 6240 PJEWAT1979: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-7171 Queens or approved equivalent) with 2 nos. x 10mm diameter & 450mm long copper pipes. 6250 PJEWAT1980: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-167 or approved equivalent) with 1 no. x 10mm dia meter & 450mm long copper pipe. 6260 PJEWAT2382: Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleani ng the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main t ested in the municipal laboratory : 6270 PJEWAT2383: 80 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6280 PJEWAT2384: 100 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6290 PJEWAT2385: 125 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6300 PJEWAT2434: Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching pow der @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deductio n will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contr actor at his own cost and nothing extra will be paid on this account]. 6310 PJEWAT2435: Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (1) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (2) Entire surface area of the sump shall then scrubbed thoroughly with wir e brush etc. and pressure washed with water. (3) Chlorination of RCC internal surface by liquid chlorine. (4) The treated surface sh all be dried using air jetting and all loose particles shall be removal from the surface. (5) Finally the surface shall be treated w ith ultra-violet radiation etc. as per direction of the Engineer-in-Charge. 6320 PJEWAT2436: Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from th e terrace including shifting at ground level as per the directions of Engineer-in-Charge. 6330 PJEWOO0237: Providing and fixing panelled or panelled & glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6340 PJEWOO0238: Second class teak wood 6350 PJEWOO0239: Kiln seasoned and chemically treated hollock wood 6360 PJEWOO0240: Kiln seasoned selected planks of sheesham wood 6370 PJEWOO0241: Providing and fixing panelled or panelled & glazed shutters 30 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6380 PJEWOO0242: Second class teak wood 6390 PJEWOO0243: Kiln seasoned and chemically treated hollock wood 6400 PJEWOO0244: Kiln seasoned selected planks of sheesham wood 6410 PJEWOO0245: Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:20 01 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of the Engineer-in-Charg e and panelling with panels of: [Note: Butt hinges and necessary screws shall be paid separately] : 6420 PJEWOO0246: 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FP T-I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS:848 : 6430 PJEWOO0247: 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, th ree layer particle board FPT-I or graded wood particle board FPT-I, conforming to IS:3087, bonded with BWP type synthetic resin adhe sive as per IS : 848 and pre-laminated conforming to IS:12823, Grade 1, Type-II marked. 6440 PJEWOO0248: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing laminatio n) grade-1, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT-1 conforming to IS:3087 bonded with BWP type synthetic resin adhesive as per IS:848 and pre-laminated conforming to IS:12823, Grade-1, Type-II marked. 6450 PJEWOO0249: Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick s hutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside gr ooves or rebates shall be measured for payment] : 6460 PJEWOO0250: Second class teak wood 6470 PJEWOO0251: Kiln seasoned and chemically treated hollock wood 6480 PJEWOO0252: Float Glass Panes - 4.0 mm thick (weight not less than 10 Kg/SQM) 6490 PJEWOO0253: Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM) 6500 PJEWOO0254: Fly proof Stainless Steel (Grade 304) wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beadi ng 6510 PJEWOO0255: 12 mm thick Exterior Grade-I MDF Board conforming to IS:14587, pre-laminated with decorative lamination on both side 6520 PJEWOO0256: 12 mm thick Marine plywood conforming to IS:710 6530 PJEWOO0257: 12 mm thick Fire retardant plywood conforming to IS:5509 6540 PJEWOO0258: Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4.0 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : 6550 PJEWOO0259: Second class teak wood 6560 PJEWOO0260: Kiln seasoned and chemically treated hollock wood 6570 PJEWOO0261: Kiln seasoned selected planks of sheesham wood : 6580 PJEWOO0291: Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block bo ard construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands a nd face veneers on both faces of shutters : 6590 PJEWOO0292: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6600 PJEWOO0293: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6610 PJEWOO0294: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 6620 PJEWOO0295: Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shu tters conforming to IS:2202 (Part-I) : On one side only 6630 PJEWOO0296: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (ov er all area of door shutter to be measured). 6640 PJEWOO0297: Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors. [Notes: (1) Cost of glass excluded. ( 2) Overall area of door shutter to be measured] : 6650 PJEWOO0298: Rectangular or square 6660 PJEWOO0299: Circular 6670 PJEWOO0300: Extra for cutting rebate in flush door shutters. [Note: Total area of the shutter to be measured]. 6680 PJEWOO0301: Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 6690 PJEWOO0302: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size : 6700 PJEWOO0303: Second class teak wood 6710 PJEWOO0304: Kiln seasoned and chemically treated hollock wood 6720 PJEWOO0305: Kiln seasoned selected class of sheesham wood 6730 PJEWOO0328: Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 6740 PJEWOO0329: 12 mm dia. 6750 PJEWOO0330: 20 mm dia. 6760 PJEWOO0331: 25 mm dia. 6770 PJEWPF2691: WATERPROOFING : 6780 PJEWPF2692: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (a) First course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (b) Second course of 20 m m cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (c) Third course of applying blown or residual bitumen applied hot at 1.7 Kg/ sqm of ar ea. (d) Fourth course of 400 micron thick PVC sheet. [Note: Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm]. 6790 PJEWPF2698: Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing ceme nt compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 K g/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the pu rpose of measurement the entire treated surface will be measured. 6800 PJEWPF2699: Grading roof for water proofing treatment with : 6810 PJEWPF2700: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6820 PJEWPF2701: Cement mortar 1:3 (1 cement : 3 coarse sand) 6830 PJEWPF2702: Cement mortar 1:4 (1 cement : 4 coarse sand) 6840 PJEWPF2703: Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers havin g Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elast omeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid ( dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping an d properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per directions of the Engine er-in-Charge. 6850 PJEWPF2704: Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC struc tures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ su bway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative ( internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrost atic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : 6860 PJEWPF2705: For vertical surface two coats @ 0.70 kg per sqm per coat 6870 PJEWPF2706: For horizontal surface one coat @ 1.10 kg per sqm 6880 PJEWPF2707: Providing and applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterpro ofing polymers on interior wall plaster surface in three coats @ 14.35 Kg/10 sqm. One coat of self priming of cementatious waterproo fing polymer (dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in t he ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per 10 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 20 NRECIV0003Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI g rade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes Finit in required proportion to make the are a clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured). 30 NRECIV0004Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water with wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete a s per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with cleani ng powder,paint remover as per requirement all labour, material etc.complete. 40 NRECIV0005Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, cle aning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with al l labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 50 NRECIV0008Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Execut ive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, se gregate the waste into biodegradable & non bio-degradeable waste and finally dispose them separately at designated place (Dumping Ya rd/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc. complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to work men, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engine er-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepera tely. The unit MONTH (MON) shall mean per house/building per month 60 PJEDRA2588Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL s hall mean KILO LITRE] 70 PJEHOR2828Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of eart h measured in stacks will be reduced by 20% for payment]. 80 PJEHOR2830Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note : Volume of cattle manure measured in stacks will reduced by 8% for payment]. 90 PJEHOR2835Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 100 PJEHOR2836Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, du mp manure and/or good earth shall be paid separately under relevant item of SOR]. 110 PJEHOR2861Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Asho kas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minim um complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 120 PJEHOR2898Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and app lying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [ Note: Unit SQM shall mean PER SQM PER MONTH.] 130 PJEHOR2903Pruning, trimming, shaping of trees/ shrubs (height 15 feet & above) and removal of cut materials up to 50m lead inclusive of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 140 PJEHOR2904Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation wa ter at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering includi ng cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Un it EA shall mean PER TRIP]. 150 PJEHOR2908Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, debri s, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direct ion of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 160 PJEHOR2909Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lea d & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 170 PJEWAT2434Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut b rushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powde r @ 0.5gm per litre capaci ty of tank, including marking the date of cleaning on the side of tank body with the help of stencil and p aint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank s hould be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contrac tor at his own cost and nothing extra will be paid on this account].

BRR:8436884 Tcmc - Repair And Maintenance Of Basement And Galvanizing Sheets At Ro Plant In Zone Ii=- Dismantling the existingpainted galvanized iron sheets in the existing surface clearing away from the work siteincluding all labour and incidental charges etc., complete. 2 Dismantling the Square Tubein the existing surface clearing away from the the existing surface clearing away from the work siteincluding all labour and incidental charges etc., complete. 3 Dismantling the Brick Work in the existing surface clearing away from the work site the existing surface clearing away from the work siteincluding all labour and incidental charges etc., complete. 4 Removing and Re-fixingof 250/500/1000 Litre per hour capacity Reverse osmosis pant in work site including all labour and material etc compete as per direction by departmental offers 5 Fabricating,supplying and fixing of pre painted galvanized iron sheets with the following specification.The materials should be of PPGI tile profile with red colour or any other approved design 0.47mm thick 24 gauge having width 1050mm.The sheet should be GI base pre painted hot dipped valvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using mute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120 GSM paint thickness the finish should be terra cotta finish like Malabar mangalore tiles finish optional matt finish .the sheet to be fixed with making suitable corrugated,cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers 6 Supplying, Fabricating, Erecting structural steel work for roofing welding or bolted type using MS Channels, angles, plates and round bars etc conforming to IS specification including primer coating and enamel painting as per Design given by the departmental officers etc, complete as per standard specification 7 Supply and Fixing of Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) setincluding all labour and material etc compete as per direction by departmental offers 8 Supply and Fixing of Reverse Osmosis Automatic Panel Board Suitable for 25/500/1000 LPH capacity etc complete as per specifications 9 Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuse unit (500V)32Aneutral link and earth link(1x1/8 copper flat)on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1 thick aneither side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection SD-128 10 Supplying and fixing Solid Blocks of Following size conforming to S.S 2145-1965 (including jam blocks closers etc.,) made of CC1:3:6 in CM 1:5 (one of cement and five of sand) and partition wall including curing neat finishing etc., complete complying with standard specification and as directed by the departmental officers.,(Approved by SE (CW) in ir No.15056/95BD/S1/dated 23.08.1995) 11 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 12 Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification 13 Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 14 Supply and Fixing of Following Materials and specials 15 20mm UPVC Pipe 16 20mm UPVC Valve 17 2000 Litres Water Tank 18 1000 Litres Water Tank 19 2.0 HP Monoblock Pump 20 3 Phase Panel Board including labour charges 21 Supply and delivery of 200x35 lpmxm Electric Monoset centrifugal pump conforming to IS 9079:2002 as amend¬ed from time to time, with CI FG 200 Casing, hydraulically and dynamically balanced Bronze grade LTB-2 impeller, impeller ring and casing ring, stainless steel shaft capable of discharging required quantity of water against a total head noted below due to all causes. Pump shall of BEE 3 Star Rated and capable of discharging the specified quantity at the head noted at the minimum NPSHA at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase , 415 V+/- 10% , 50 Hz +/- 5%. Squirrel cage induction motor for continuous operation. The speed of the Pump and Motor shall be not less than 2700 to 2900 RPM respectively. 22 Supply and Fixing of 250LPH Menbrine With Housing including all labour and material etc compete as per direction by departmental offers

BRR:8436839 MTPS-I - ES Circle - MRT– Unit-I - TG area - AOH maintenance works to be carried out for the year 2025-26 in the valve actuators of AS,CA ,DW,CS & ES, BFP discharge, BFP ACW,MC, MSSV & FW valves, Generator Transformer, UAT A & B and DVR equipments- Charges for cleaning, disconnection of power cables and control cables, terminal tightness checking of actuator terminal blocks, local push button and lubricating the limit switch mechanism. 2 Charges for reconnection of power and control cables, setting of open/close limit/ torque switches, testing of modules, motors and checking of operation. 3 Charges for power/control cable jointing works for actuator. 4 Charges for Cleaning of Converter cubicles, Field Breaker cubicles, Regulation Cubicle and Field Flashing cubicles, AC/DC racks, Air conditioner units, checking the tightness ofAC / DC bus bar joints, terminal blocks in Converter panels, Field Breaker panel and Regulation Panel . 5 Charges for Opening/closing time and contact resistance measurement works of Field breaker main and FDR contacts, testing of relays, transformers & timers, carrying out the modification works for conducting the dummy load test in the Digital Excitation System and measurement of Rotor DC resistance and impedance measurement at standstill, barring gear speed and various speeds during rolling of turbine. 6 Charges for transporting the testing equipment to transformer yard, assisting for conducting OCC, SCC tests on GT, UAT’s (A& B) and its NGT, terminal tightness checking in marshaling boxes, metering and protection CT’s.

BRR:8436648 Tender For Area Development Scheme Of 165 Plots (Hig-38, Mig-69 & Ews-58) In 8.19 Acres Of Land (Old S.F No. 67/6, 67/7, 76/1,76/3 &76/4) Of Edappadi Phase – V At Edappadi Village In Salem District.; 1 Open Earthwork excavation for boxing of roads in all soils and sub soils to the required depth as may be directedexcept in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder and including water charges etc., all complete in all respects complying with relevant standard specification and drawing as directed by the departmental officers.(excluding Refilling) 2 0 to 2m depth In ordinary soil 3 0 to 2m depth In MR & DMRrequiring blasting 4 2 to 3 m depth Hard rock req blasting 5 Earthwork excavation for foundation in all soils and sub soils to the required depth as may be directedexcept in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder, including water charges etc., all complete in all respects complying with relevant standard specification and drawing as directed by the departmental officers.(excluding Refilling) 6 Upto 1.25 m width 7 For Ordinary Soil 8 For SDR not requiring blasting & Stacking 9 Beyond1.25 m width 10 For Ordinary Soil 11 For Medium Rock requiringnot requiring blasting 12 Supplying and filling in foundation, basement, etc with Quarry rabissh layers of not more than 15 cm thick well watered, rammed and consolidated, including water charges etc. complete complying with standard specification and as directed by the departmental officers. 13 Providing,laying,spreadingand compactinggraded stone aggregates forWetMix Macadam 250mm thick,including premixing the materials with water at OMC in mechnanical mix plant,conveyance of mixed materials by tipper to site,laying in uniform layers using pavers in Sub Base / Basecourse on well prepared surface and compacting with vibratory soil compactor to acheive the desired density including cost of material,labourcharges,rentals for machinery,fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 14 Providing and laying Prime Coat over WMM surface using 7Kg of Emulsion Bitumen (SS1) per 10sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,complete as per Clause 502 of MORTH Rev-5 15 Providing and laying Tack Coat over WBM/WMM surface (treated with primer) using 2.50Kg of Bitumen Emulsion (RS1) per 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5. 16 Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm,0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 17 Providing and laying Bituminous Concrete to 40mm/30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30t on capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9mpaver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTHRev-5 18 Supplying and filling in foundation and basement with Gravel of not more than 15 cm thick well watered, rammed and consolidated, including water charges etc. complete complying with standard specification and as directed by the departmental officers. 19 Refilling the sides of foundation with excavated earth in layers of 150 mm thickness well watered and rammed and consoilidated (including water charges) complying with relevant standard specification. 20 Cement concrete 1:5:10 ( One of cement,five of sandand ten of hard broken stone jelly) for foundation and basement using 40 mm size hard broken stone jellyinclusive of shoring, strutting, baling out water wherever necessary ramming, curing and including water charges etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers. 21 Cement concrete 1:2:4 ( One of cement,two of sandand four of hard broken stone jelly) for foundation and basement using 20 mm size hard broken stone jellyinclusive of shoring, strutting, baling out water wherever necessary ramming, curing and including water charges etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers 22 Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including Super Plasticiser,laying, vibrating with mechanical vibrators, finishing, curing, water charges etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers 23 In Foundationand Basement 24 Below1.50 to 4.50m depth 25 Up to 1.50 m depth:- 26 In ground floor 27 Supply and erecting shuttering including necessary support for plane surface in foundation and basement for RCC raft slab, beams, column footings, plinth beams, steps etc., using suitable MS sheets of 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oakjoists of size 10cm x 5cm& 7.5cm x 5cm as support runner , vertical stiffener , side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. 28 Providing form work for reinforced cement concrete works using M.S.sheet of size 90x60cm and MS 10 guage stiffened with M.S. angle of size 25mmx25mmx3mm for boarding laid over silver oak (C.W.) joist of size 10cmx6.50cm (spaced about 90cm c/c) and supported by casurina post of 10cm to 13cm dia (spaced about 75cm c/c) etc., including strutting up to 3m height and removing the same after a specified period without damaging the RCC works in all floors complying with relevant standard specification and as directed by the Departmental Officers.. 29 For R.C.C Works in Circular foundation and basement such as Pile cap, Grid beam, Plinth Beam, Raft Beam, Raft slab, Column base, Column Footings etc 30 For R.C.C Works such as Floor and curved roof slab,lintels, BeamsStaircase Waist and landing slab and curved surfaces and similar works etc all Complete 31 Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers. 32 Manufacturing supplying and fixing of Fully panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 4nos. One the top of each shutter, one at lock rail and the other at the bottom are provided.1no. Aldrop is providedat lock rail section in the door 3 Nos of handle are to be provided,one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges,water charges etc.,complete complying with standard specification and as directed by the departmental officers. 33 Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of Z section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion J section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made ofF7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of Steel Offset Pivot hingesof size 3 and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of lenght 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 200mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, water charges etc., complete complying with standard specification and as directed by the departmental officers. 34 Supplying and fixing Mild Steel grills for windows, ventilators including water charges etc.,complete complying with standard specifications and as directed by the departmental officers. 35 Brick work in following Cement Mortar 1:6 using best quality Fly ash Brick of size230x110x75 mmfor foundation and basement including Cost of Mortar Plasticizer, curing, water charges etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge 36 In Ground Floor 37 Brick work in following Cement Mortar 1:5 using best quality Fly ash Brick of size230x110x75 mmfor foundation and basement including Cost of Mortar Plasticizer, curing, water charges etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge 38 In foundation & basement 39 Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x75mm w Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing, water charges etc.complete complying with standard specification and as directed by the departmental officers. 40 In Ground Floor 41 Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing,curing,water charges, etc., complete in all floors complying with standard specification and as directed by the departmental officers. 42 Providingcuddappah slabs of 25mmthickness for cupboards, wardrobes .shelves, of well polished on both sidessmoothly including fixing with CM 1:3 (one of cement three of sand) including cutting the wall and cuddapah slab to the required size laying fixing in position and finishing with black oxide wherever necessary neatly and including water charges etc. as all complete complying with relevant standard specificaton and as directed by the departmental officers in Ground Floor. 43 Supply and fixing of C.I.manhole cover with locking arrangements of approved quality and brand of size 60 x 60 cm (Heavy Duty) including cost of material labour chares for fixing etc all complete complying with relevant standard specification and as directed by the Departmental Officers.( The brand and model of the CI manhole cover has to be got approved by the EE before fixing) 44 Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm, and below) 20 mm thick Ellis Pattern Flooring (No Sand) and surface rendered smooth including 50mm wide skirting, providing proper slopes,thread lining, curing and water charges etc., complete in all floors complying with relevant standard specifications. 45 Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, and including water charges etc., complete as per standard specification and as directed by the deparmental officers.s and as directed by the Departmental officers. 46 Finishing the top ofroof slab with one course of hydraulically pressed tile of approved superior quality ofsize 23 cmx23cm,20mm thick laid over weathering course in cement mortar 1:3 ( One of cement and three of sand) 12mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing,water charges etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.(Note:Tiles to be got approved by the EE before use ) 47 Plastering with Cement Mortar 1:5 ( One of cement and five of sand) 12mm thickfinished with neat cement including, providing band cornice scaffolding, curing and water charges etc.,completecomplying with relevant standard specification and as directed by the departmental officer. 48 Plastering with Cement Mortar 1:3 ( One of cement and three of sand) 10mm thick , finished with neat cement including, providing band cornice scaffolding, curing and water charges etc.,completecomplying with relevant standard specification and as directed by the departmental officer. 49 Finishing the top of flooring with cement mortor 1:4 (One of cement and four sand of ) 20 mm thick Flooring surface rendered smooth including 150mm wide skirting, providing proper slopes,thread lining, curing, water charges etc., complete in all floors complying with relevant standard specifications. 50 Plastering with cm 1:3 (One of cement and three of sand) 12mm thick finished withWater Proofing Compoundincluding providing band cornice, ceiling cornice, curing, scaffolding, water charges etc., complete in all respects and complying with relevant standard specifications. For Sump Base Slab - Bottom 51 White washing three coats using clean shell lime slacked and screened including cost of lime, gum, blue brushes, scaffolding,water charges etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. 52 Painting the new walls with two coats of approved cement paint over one coat of primer such as snowcem /supercem etc., including cost of brushes, cement paints scaffolding curing, water charges etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use). 53 Supplying and fixing of PVC mould CI Steps for Sump including labour etc. all complete specification and as directed by the Departmental Officers. 54 Painting new iron work with two coats of approved Ist class synthetic ready mixed enamel paint of approved quality and shade. The paint should be supplied by the contractor at his own cost.(The quality and shade of the paint should be got approved from the Executive Engineer before use on works) including cost of paint ,brushes,water charges etc.all complete complying with relevant standard specifications. 55 Providing75 mm thick pre cast cement concrete slabin R.C.C 1:2:4 (one of cement,two of sand and four of hard broken stone jelly) using 20mm hard broken stone jelly for the following thickness excluding cost and fabrication of reinforcement grills but including precasting, moulding ,curing,finishing and fixing in position, water charges etc., complete complying with relevant standard specifications and as directed by the Departmental officers. 56 Supply and planting of Avenue trees -5 height including earth work excavation for pit of size 60X60X60cm filed withmanure for 20cm depth and filling with river sand and red earth mix in the ration of 1:1 for 40cm depth in the same pit and planting the avanue tree(Maintenance for 6 Months) 57 Supplying and fixing of triangular shape chicken mesh TREE GUARD using 8 cm dia. Casurina vertical postand middle tie using country wood reeper of size 50X25mm and 25 gauge chicken mesh including labour charges,water charges for fixing the triangular tree guard and as directed by departmental officers. 58 Supplying and fixing of survey stones size 0.75 x 0.15 x 0.15m having dressed on two sides for a height of 30 cm from top including with necessary earth work excavation and fixing them in position complete as directed at site of work. 59 Supplyingand fixing of barbed wire fencing using two ply 10 gauge wire at 0.30 m interval in horizontal and two diagonals etc., complete including cost of barbed wireand binding wire and fixing in possition etc., complete as directed by departmental officers 60 Supplyingand fixing of Rcc Post 0.15 x 0.15 at base and 0.10x0.10 at top and 2.10m height for FENCING as directed by departmental officers 61 ProvidingStrut for PCC Drains precast cement concretein R.C.C 1:2:4 (one of cement,two of sand and four of hard broken stone jelly) using 20mm hard broken stone jelly for the following thickness of 100mm including cost and fabrication of reinforcement grills, precasting, moulding ,curing, waterfinishing and fixing in position, water charges etc., complete complying with relevant standard specifications and as directed by the Departmental officers. 62 FOR DRAIN SIZE OF 45x60 CM 63 FOR DRAIN SIZE OF 75/x90 CM 64 Supplying and Fixing of 63mm dia PVC in Drain Walls for discharging Storm water etcas directed by the departmental officers. 65 Supplying and Fabrication and Erection in position iof M.S scheme name and layout board with 50 X 50 x 6 mm M.S angle for vertical post and support posts with 2.5mm tk M.S Sheet for a size at 1.80 x 1.20 m with 40 x 40x6mm MS anglearound the board and 50 x 6 mm flat stiffeners on both direction including cost of welding charges painting charges and drawing the layout and lettering the scheme details as directed by the departmental officers including earth work excavation for 4 nos of pits, PCC 1:5:10 forpits 0.45 x 0.45 x 0.60m below Ground level and p.c.c 1:2:4 at 0.30 x 0.30 x 0.30 m above Ground level for erection conveyance charges etc., all complete and as directed by the departmental officers. 66 Engagement of bulldozer to level the site by dozing earth from elevatedportionof site to down fall site to cover the rocks rolled out in to the pits found then and there in the site so as to from a plain surface fordemarcation of plots, marking roads and drains without any obstruction to run the marking rope to provide identification for earth work with lime powder including cost fuel, driver charge & bulldozer hire charge etc complete as directed by dept officers. 67 Clearing and removing Light jungle in the scheme area including labour for removing,burningand clearing the same as directed by the departmental officers. 68 Run off the 4 wires of 4 sqmm Copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990with one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house / flats including all materials etc... all complete for EB service connections including labour charges for fixing GI wire and MS angles (For EB Service connection three phase) 69 Supplying and fixing of 1 no of 450x375x20mm thick TW Plank varnished with 3 no of 32 amps 500 volts fuse unit and 1 no copper earth plate of suitable size bolts and nuts on wall for EB service connections including cost of all materials etc., all complete (Three phase service connection) 70 40mm dia G.I pipe for EBSCas directed by the departmental officers. 71 Wiring with 2 x 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990andwith continuous earth by means of 1.5 sqmm copper insulated unsheathed single coreMulti Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 infully concealed PVC rigid conduit pipe heavy duty with ISI with suitable size MS box of 16 SWG thick concealed and covered with 3mm thick laminated hylem sheet for light point with celing rose controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete complying with relevant standard specifications & as directed by the departmental officers.. 72 Light point with ceiling rose. 73 Light point without ceiling rose with bakelite battern type holder 74 Wiring with 2 x1.5sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 andwith continuous earth by means of 1.5 sqmm copper insulated unsheathed single coreMulti Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 infully concealed PVC rigid conduit pipe heavy duty with ISI with suitable size MS box of 16 SWG thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps 5 pin flush socket point at switch board itself circuit mains cost of all materials, specials etc., all complete complying with relevant standard specifications & as directed by the departmental officers.. 75 Run off the 2 wires of 2.5 sqmmCopper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990with continuous earthing means of 2.5 sqmm copper PVC Insulated unsheathed single core multistand fire retaradant 1.1 kv grade cable confiring to IS 694/1990 in fully concealed 19/20 mm dia rigid pvc conduit pipe (heavy duty ) with ISI mark including cost of all materials specials etc., all complete .complying with relevant standard specifications and as directed by the departmental officers. 76 Supply and fixing of 40X40X6mm M.S Angle for single phase EB Service connection to meet the E.B requirements etc., all complete .complying with relevant standard specifications and as directed by the departmental officers. 77 SUPPLYING and laying of 8 SWG GI Wire on wall below GL With necessary U nails earth work excavation and refilling etc. Complete compplying with relevant standared specifications and as directed by the departmental officers. 78 Supplying & fixing of water tight bulk head fittings with chokeguard suitable for 60/100 Watts bulb including necessary connections cost of materials, supply ofone number of Bulk Head fitting, 11 watts CFL lamp etc. all complete as directed by the Departmental Officers. 79 Supplying and fixing of 32 Amps Triple pole switch with metal clad (side handle) with rewireable fuse unit on a suitable well varnished Teak wood of boardincluding necessary inter connection and earth connection, cost of all materials etc., all complete. 80 Providing Earthing station using pipe electrode as per IS 3043 using 2.0m of 40mm and 1.0 m of 20mm B-class 1m of 15mmGI pipe including earth work excavation, brick work in cement mortar and plastering and cost of funnel, GI nuts, bolts, washers, check nuts, GI bend, reducer and coupling, C.I. cover of 30x30cm and including charcoal of 25 kgs and salt10 kg etc., all complete complying with relevant standard specifications & as directed by the departmental officers. 81 Supplying and fixing of five star rated high speed Ceiling Fan with electronic stepped regulator etc. all complete specification and as directed by the Departmental Officers. 82 Supplying, laying and joining the following dia PVC (SWR) pipe type B class having pressure 6kg/cm2 confirming to IS 13592 and relevant specials including necessary earth work excavation for trenches and refilling the same, well rammed and consolidated after the pipes are joined with lubricant,laid to proper gradient and to the alignment etc complete in all respects complying with relevant standard specifications and as directed by the departmental officers Below ground level(The brand and quality of pipes should be got approved from the EE before use).For Distribution Line 83 90 mm dia PVC pipe (6Kg/Sq.cm)Below G.L 84 63 mm dia PVC pipe (6Kg/Sq.cm)Below G.L 85 50 mm dia PVC pipe (6Kg/Sq.cm)Below G.L 86 25 mm dia PVC pipe (10Kg/Sq.cm) Below G.L 87 Supplying and fixing in position best approved of BIS quality110mm PVC rain water down fallpipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails,etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab includingfinishing neatly etc., complete. The rate shall be inclusive of cast of removable cast irongrating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centreof the pipe line in addition to those for more than 3.0 metre pipe length, etc., completecomplying with standard specification and as directed by the departmental officers. 88 Supply and delivery of the following PVC rigid pipes of pressure rating 6KSCwith ISI mark and specials of approved quality including cost of materials and conveyance to site of work etc.complete.(The quality and brand of pipe and specials should be got appproved by the EE before use) 89 PVC Tee 63 mm 90 PVC Bend 90 mm 91 PVC Bend 63 mm 92 PVC Bend25 mm 93 PVC end cap 63 mm 94 PVC End Cap 50 mm 95 PVC end cap 25 mm 96 PVC reducer 63x50 mm 97 PVC reducer 90x63 mm 98 PVC saddle piece 50X25 mm 99 PVC saddle piece 63x25 mm 100 PVC Ferrule 25 mm 101 PVC 90mm Flange with Tail piece 102 PVC 90mm adopter 103 90 mm PVC pipe- 6kg/sq.cm for Road Crossing 104 50mm PVC pipe - 6kg/sq.cm for Road Crossing 105 Construction of Valve pit chamber of size 90X90X90CM as per standard type design including earth work excavation in all soils and sub soils except in hard rock requiring blasting refilling the sides of foundation with excavated earth foundation concrete with cement concrete 1:5:10 using 40mm HBG jelly, brick work in cement mortar 1:5 using chamber burnt II nd class ground moulded bricks of size 9x43/8 x 23/4 and plastering with cement mortar 1:5, 12mm tk, plain cement concrete 1:2:4 using 20mm gauge HBG jelly and RCC precast slab of 75mm tk using 20mm gauge HBG jellyexcluding cost and fabrication of steel grills but including jointing pipe lines and specials, fixing valves and surface box etc. all complete complying with relevant standard specification and as directed by the departmental officers 106 For Fire Hydrant Valve 107 For Scour valve 108 For Sluice Valve 109 Air valve 110 Supplying and fixing 30W LED CUB Model Street light fittings all type in the existing street poles with required GI Pipes B Class and accessories etc., complete 111 Supply and fixing of 2 Nos. of MS Box ofsize not less than 600X225X100cmn 16g with door and lock and key arrangements for obtaining E.B.Service connection for street lights with One box comprising off 1 Nos. 32 AMPS 500 V fuse Units, 1 No. copper earth plate with required brass bolts and Nuts with washers on a suitable single TW plank of 20mm thick for fixing E.B. meter and other box comprising of 1 No. 32 AMPS DPIC, 1 No 40 AMPS single pole MCB isolater with connections MS sheets steel enclosure for controlling the street lights on Subitable single TW plank of 20mm thick and including necessaary bolts and Nuts in theTNEB pole with washers and run off 4 Sq.mm copper PVC insulated unsheathed single core/cable in 20mm B grade class GI pipes with ISI mark of required quantity for street light service connection etc., all complete in all respects and as directed by the departmental officers. 112 Supply and delivery of 1100 lit capacity Galvanized iron compactor bins suitable for being lifted by the bin lifted mechanism of the Compactor vehicle for the following specification including loading and unloading charges .( As per QTN including GST ) 1. Over all dimension volumetric capacity 1.10 cu.m2. Length of 1100 mm & width 950 mm3. over all height 990mm4. Bottom Panel with 2mm thickness5. Front and rear panel 2mm thickness , side panel 2mm thickness 6. Lift hook 42mm OD GI pipe etc 113 Providing and Erecting of Direction and Place identification Retro - reflectorised signs made out of cube Corner Micro prismatic Grades sheeting confirming to Type - XI standards of IRC- 67: 2012 and ASTM D 4956 09 specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmX25mm X3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with clear height of not less than 2.1m from the ground level to the bottom of the sign board and 0.6m below ground level. the sign post should be painted as per IRC 67- 2012 and firmly fixed to the ground by means of properly designed foundation with P.C.C 1:2:4 using 45cmX45cmX60cm size including cost and conveyance of all material, Equipment , Machinery and labour with all leads and lifts , loading charges necessary for satis factory completion of the work as directed by the Engineer in charge. Micro Prismatic grade Retro - Reflectro sheet shall consist of minimum coefficient of Retro - relection as per Table 6.9 of IRC 67-2012 . The retro - reflective sheeting shall be covered under 10 years waranty issued for field performance and a certified copy of three years out door exposure report shall be obtained as per IRC 67-2012 ( as per MOT& H specification No.801 ) for location of Black spot , curve, sharp bend, junction, ghat roads and critical zone application. Indication Board size 0.90X 0.60M 114 Providing and laying of hot applied Thermoplastic compound 2.5 mm thick includingreflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniformand free from streaks and holes etc., complete as per MoRT&H specification No.803

BRR:8436438 Tender for Protection To Scoured Bank On Brahmani Right Near Wtp Point At Village Ranasuda Of Gondia Block.

BRR:8436334 Special Repair Work Of It Infrastructure Data Networking, Voice Networking, Video Audio Conferencing Including Pa System, Cctv At The Premises Of West Bengal Judicial Academy, Newtown, Kolkata.

BRR:8436328 Tender For Handheld Megaphone Speaker Mike ( Public Address System )

BRR:8436187 Tender For Transportation tender under Group-A for the year 2025-26-- 1 Transportation Rates 2 Transportation rates (in Rs.) from the godowns/flour mill/Sugar Mill situated within District up-to Fair Price Shops of Sub Divisionfalling in the District 3 Transportation rates (in Rs. per Qtls per KM) from the godown/flour mill situated outside the district up-to Fair Price Shops of Sub Division falling in District Distance in KM between Confed Focal Point & Agency Godown 1 KM to 50 KM (Rate allowed for 50 KM minimum) 4 1 KM to 70 KM (Rate calculated on per KM) 5 1 KM to 100 KM (Rate calculated on per KM) 6 1 KM to 150 KM (Rate calculated on per KM) 7 1 KM to 200 KM (Rate calculated on per KM) 8 1 KM to 250 KM (Rate calculated on per KM) 9 1 KM to 300 KM (Rate calculated on per KM) 10 Transportation rates (in Rs.) for delivery of wheat from Agency godown situated within Distt./Out of Distt. up-to Flour Mill falling in District

BRR:8436186 Transportation tender under Group-A for the year 2025-26-- 1 Transportation Rates 2 Transportation rates (in Rs.) from the godowns/flour mill/Sugar Mill situated within District up-to Fair Price Shops of Sub Divisionfalling in the District 3 Transportation rates (in Rs. per Qtls per KM) from the godown/flour mill situated outside the district up-to Fair Price Shops of Sub Division falling in District Distance in KM between Confed Focal Point & Agency Godown 1 KM to 50 KM (Rate allowed for 50 KM minimum) 4 1 KM to 70 KM (Rate calculated on per KM) 5 1 KM to 100 KM (Rate calculated on per KM) 6 1 KM to 150 KM (Rate calculated on per KM) 7 1 KM to 200 KM (Rate calculated on per KM) 8 1 KM to 250 KM (Rate calculated on per KM) 9 1 KM to 300 KM (Rate calculated on per KM) 10 Transportation rates (in Rs.) for delivery of wheat from Agency godown situated within Distt./Out of Distt. up-to Flour Mill falling in District

BRR:8436185 Transportation tender under Group-A for the year 2025-26-- 1 Transportation Rates 2 Transportation rates (in Rs.) from the godowns/flour mill/Sugar Mill situated within District up-to Fair Price Shops of Sub Divisionfalling in the District 3 Transportation rates (in Rs. per Qtls per KM) from the godown/flour mill situated outside the district up-to Fair Price Shops of Sub Division falling in District Distance in KM between Confed Focal Point & Agency Godown 1 KM to 50 KM (Rate allowed for 50 KM minimum) 4 1 KM to 70 KM (Rate calculated on per KM) 5 1 KM to 100 KM (Rate calculated on per KM) 6 1 KM to 150 KM (Rate calculated on per KM) 7 1 KM to 200 KM (Rate calculated on per KM) 8 1 KM to 250 KM (Rate calculated on per KM) 9 1 KM to 300 KM (Rate calculated on per KM) 10 Transportation rates (in Rs.) for delivery of wheat from Agency godown situated within Distt./Out of Distt. up-to Flour Mill falling in District

BRR:8436143 Tender For Bioside Colour Precipitant Bio Culture Seed Slurry Viscocity Chemical , Biocide (Dtc Base) Biocide (Dithio Carbomate Base), Specification- Flash Point -70-75°C- Sp Gravity- 1.1 To 1.2- Concentration Base Chemical 40% , Ph- 8.5 To 10, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Biocide For Filter Juice Specification - Flash Point - 100°C, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Biocide (Qac Base) Biocie (Dithio Carbomate Base), Specification - Ph- 7.1 -8.1, No Pesticide Redisue Ingredients Min- 35%, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Colour Precipitant(Cpt) Colour Precipitant (Quartery Anionic Decolourzing Polymer- Food Grade) Specification -Ph- 4 To 6, Sp. Gravity- 1.1 To 1.2, Form- Clear Liquid, Colour- Colourless To Pale Yellow, Viscosity- 7000 To 12000, Freezing Point- 0°C, Boiling Point- 250°C, Dose- 20Ppm, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Micro Bio Culture For Etp, Specification- Microbial Content - 4X109m³/Lt, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Poly Electrolyte Specification- Solid Form, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Seed Slurry 3.5 Specification- Grain Size- 3 To 5 Micron Ipa Based, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki , Viscocity Reducer (Oil Base), Specification- Ph. 7.5 ±5, Appearance- Amber Liquid , Sp Gravity- 1.03 ± 0.02, Stability- Stable At Factory & Elevated Temp., Storage- No Deterioration, Handling- Non Corrosive, Iron Equipment Satisfactory, Make- Diftech/Polychem/Ubc/Chemical System/Suzalkem/Nki Please Enable Macros To View Boq Information

BRR:8436140 Tender for annual maintenance Of Ephs (Sewer) In Sector-25-Ii (Indl. & Housing), U/E Panipat.Desilting Of Various Sewer Manholes Points In Sector-25-Ii Complete In All Respect And All Other Works Contingent Thereto.

BRR:8436084 Demarcation And Marking Points For Fixing Pillars On The Line Of Actual Boundary After Gps Demarcation Of 522 Acres Forest Land Of Nahar Wls. Forest And Wildlife Department, Haryana Demarcation And Marking Points For Fixing Pillars On The Line Of Actual Boundary After Gps Demarcation Of 522 Acres Forest Land Of Nahar Wls. Forest And Wildlife Department, Haryana

BRR:8436076 Widening Of Intersection Points By Constructing Rmc M-25 Slip Roads At Nh-5 Near Mcf Colony, Bankey Bihari Mandir Wali, Selfi Point Wali Gali And B.K Chowk And Others In Ward No.15 (New), Faridabad.Recall

BRR:8436075 Widening Of Intersection Points By Constructing Rmc M-25 Slip Roads Near Saluja Petrol Pump And Others Nh-5 In Ward No.15 (New), Faridabad.Recall

BRR:8435960 Tender for Construction Of Street Gourav Singla Wali, Remaining Part Of Dhanak Dharamshala, Roshan Lal Chakki To End Point And To Head Of Krishan Tailor And Nirankari Bhawan Wali Gali, Adjoining Dr. Subash Street, Krishan Indora To Sukhdev Singh Wali Gali, Ward No. 1, Mc Sirsa.

BRR:8435788 supply installation testing and commissioning of AC machines (24 x 7) and its allied EI works at server room for proposed CCTV monitoring in Principal Office building in Calcutta National Medical College, Kolkata- 1 AC Work 2 Supply ,installation,testing and commissioning of 1.0 TR split type room air-conditioner fitted with power saving rotary compressor suitable for operatingat 230V +/- 10% 50 Hz. Single phase AC supply having features- modes (auto,cool,fan,dry) air flow (horizontal louver/ vertical swing ) sleep mode timer off/ on anti freeze thermostat bio/active carbon/dust air filter [ Make- Mitsubishi Electric, SRK12 CR-S6 cooling split AC/ O-General (ASGA12BMTA R-32si) 3 Installation testing commissioning of above split AC Machine including iron bracket (Powder coated) for outdoor unit 4 SITC of copper Refrigerant pipe line for following dia for liquid and suction line with hard drawn copper piping with all necessary fittings, supports & brackets including wraping the same properly after insulation. 5 12.7mm OD with minimum thickness 0.8mm with 9mm thick nitrile insulation (Make: Rajko/Royku/Mandev) 6 6.35 mm OD with minimum thickness 0.9mm with 9mm thick Nitrile insulation .(Make: Rajko/Royku/Mandev) 7 Supply & laying 1 heavy type PVC pipe for water drainage 8 Control Cabling (3 x 2.5 sqmm)between ODU and IDU. (Make - RR Kabel / Poly Cab/finolex ) 9 FRAME WORK: Supply, fabrication & fixing of 2 nos. M.S U Channel of 5mm thick of size (50mm x 30mm x 30mm) of 1m length for making platform for installation of outdoor unit incl. drilling 2 nos. hole in each channel including making necessary arrangement as per site condition as per direction of EIC. 10 E.I Work 11 Distn wiring with 3 x1.5 mm² PVC insulated unsheathed Cu wire(Finolex/RR Cables/Polycab) in20mm dia PVCrigid conduit pipe (Precision)to L. & F. point complete with 5A Piano Key Switch on 16 SWG CRC sheet metal M.S. Box with 3mm thick Bkt top cover & 3 nos. copper connecting Bars fixed on Bkt chair inside, with earthing attachment on wall & mending good damages as per direction of the E.I.C. Av. Run 8 Mtrs. 12 S/F 250V. 5A. 5 Pin Plug & Piano switch (Anchor) onBoard 13 Supplying and fixing 250 V,2+8 way SPN MCBDB(Similar to Legrand Cat no.-607712) with SS enclosure double-door(Metallic door with acrylic) with IP-43 protection with 40 Amp MCB(30 mA)as incomer and 08 nos SPMCBs (C Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make-Legrand/L&T /Schneider ) 14 Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unsheathed copper wire (Havelles/Finnolex) in 20mm size PVC rigid conduit FR (Precision make) incl. necy. fittings as required 15 a) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC VTPNDB to AC 16 b) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC for computer board & power board 17 Supplyof 240V Timer DB(equivalent of 2+12 way SPN Double Door DB in size) with steel sheet enclosure double door, phosphitised powder coated, neutral bar, Din Rail with IP- 43 protection comprises with 1 No.40A DP MCB(C Curve,10KA),1 No.24 hours programming Time Switch( L&T/ Aproved make) with 15 min minimum switching time of any time and any day and 1no 32Acontractor(Make- L&T/Approved) complete withinternal wiring by suitable sizze of copper wire and Provision for earthing attachment including LED indication light for running condition with locking arrangement & including ON/OFF push button (Make- L&T/Approved). 18 Supply & fixing 2 pole MCB enclosure with 1no. 230 V 25/32 Amp 2-pole MCB(Legrand/SIEMENS/ABB) to be fixed concealed in wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per direction of E.I.C 19 Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required 20 Supply & fixing of 240 V, 3 nos 6A & 1 no 20A, plug socket with seperate 3 nos 6A & 1 no 20A switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) powder coated switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(P.G No: E-7,25) 21 Supply and fixing of recess mounted decorative LED full out put luminaries (Philips cat no-RC380LED42S 6500 G6 L60 W60 PSU OD) with CRCA powder coated body & high efficiency diffuser to provide high LOR & glare free soft light, Equivallent model of CG/WIPRO 22 S& D 48 sweep 230 V,1-Ph ,AC Ceiling Fan inclu all access.The Capacitor of the fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of the fan.(Make-CG HS plus/Usha Striker Plus /Orient Energy Plus having similar specification) S & D 48 Sweep,230 V,1-ph ,AC ceiling fan incl all access. 23 Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 24 6 sqmm 25 4 sqmm 26 2.5 sqmm 27 Add: GST @18% on total amount ofabove item (i.e. from item Sl. No. 1.00 to 17.30) as applicable 28 Add: LWC @1% on total amount ofabove item (i.e. from item Sl. No. 1.00 to 18.00) as applicable 29 Note: 1) Quoted Rates are inclusive of the all taxes, duties & cess as applicable with cost of maintenance, servicing,supply & replacement of spares for 1 (One) year from the date of commissioning.2) Total is rounded off to the nearest rupee and inclusive of all taxes, duties & cess as applicable.

BRR:8435787 Urgent electrical installation work at newly constructed common collection point and some other areas of the Calcutta National Medical College, Kolkata- Distn wiring with 3 x1.5 mm² PVC insulated unsheathed Cu wire(Finolex/Polycab/Bonton) in20mm dia PVCrigid conduit pipe (Precision-MMS)to L. & F. point complete with 6A Piano Key Switch on 16 SWG CRC sheet metal M.S. Box with 3mm thick Bkt top cover & 3 nos. copper connecting Bars fixed on Bkt chair inside, with earthing attachment on wall & mending good damages as per direction of the E.I.C. Av. Run 8 Mtrs. 2 Supplying and fixing 240 V,2+12 way SPN MCBDB(Similar to Legrand Cat no.-607712) with SS enclosure double-door(Metallic door with acrylic) with IP-43 protection with 40 Amp MCB(30 mA)as incomer and 12 nos SPMCBs (C Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make-Legrand/LK /Schneider ) 3 Supply & fixingof 240V. double LED tube light Fittingscomplete with all accessories (Make: Wipro; Cat No. For Led Channel: WIO922208& 2 Nos 20 wattLED tube of Wipro Cat No:LL13-181-65SESL OR Cat No:LL13-181-65SESL1(Nonschedule item) or Philips/ Lighting Technology) 4 Distributionwiring in 1.1 KVsingle core stranded FR PVC insulated & unsheathed copper wire (Finolex/Polycab/Bonton) in 20mm size /25mm/ 32 mm size as per requirement PVC rigid conduit FR (Precision make, M Type) incl. necy. fittings as required 5 2 x 22/0.3 (1.5 sqmm)+1 x 22/0.3 (1.5 sqmm) ECC 6 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC 7 2x 84/0.3 (6 sqmm)& 1x 56/0.3 (4 sqmm) in 20mm dia 8 Supply and fixing of recess mounted decorative LED full out put luminaries (Philips cat no-RC380LED42S 6500 G6 L60 W60 PSU OD) with CRCA powder coated body & high efficiency diffuser to provide high LOR & glare free soft light, Equivallent model of WIPRO/ Lighting Technology) 9 Supplying & fixing 240 V 2 nos. 5 Pin 6 A flush type plug socket with 6 A Piano key type (Anchor make) switch on 175x100x65mm size (16SWG) powder coated MS boxwith bakelite top cover and earthing attachment incl. S&F sheet metal box [16 SWG] with 3mm thick bakelite top cover. 10 Supply & fixing of 240 V, 3 nos 6A & 1 no 20A, plug socket with seperate 3 nos 6A & 1 no 20A switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) powder coated switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(P.G No: E-7,25) 11 S/F of230 V Ac ,Sweep:450 mm of Metal Body wall bracket fan (Air Circulator) Make: EPC Pvt Ltd ,RPM:1420 ,by suitable size of fasteners. 12 S/F Wall mounted 240V,1420 RPM,12Exhaust Fan after outing hole on wall with S/F nut,bolts& louver Shutter,mending good the damages & Making connection As per GS (EPC make Heavy Duty) 13 S/F of 1200mm sweep AC ceiling fan complete with all accessories without regulatorwith Star rating -5(Make Crompton HS+ or HB+ / Orient Energy Sta r/ Usha striker plus)including engraving & painting departmental fan number on the body(upto 12 letters) with S/F dia down rod &making connection with 3 x 1.5 sqmm copper wire (Finolex/RR Kabel/Havells) as per the direction of E.I.C 14 S/F 250V. 5A. 5 Pin Plug & Piano switch (Anchor) onBoard 15 Add: GST @18% on total amount ofabove item (i.e. from item Sl. No. 1.00 to 11.00) as applicable 16 Add: LWC @1% on total amount ofabove item (i.e. from item Sl. No. 1.00 to 12.00) as applicable 17 Note: 1) Quoted Rates are inclusive of the all taxes, duties & cess as applicable with cost of maintenance, servicing,supply & replacement of spares for 1 (One) year from the date of commissioning.2) Total is rounded off to the nearest rupee and inclusive of all taxes, duties & cess as applicable.

BRR:8435786 supply installation testing and commissioning of Passenger Lift with allied EI works for G+3 Female Ward of Calcutta Pavlov Hospital, 18, Gobra Road, Kolkata-700046 - Allied EI Works- 1 Supply & Laying of following size PVC Armoured Al. cable, through underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed as to G.S. 2 a) 4 core 35 sq.mm.PVC Ar./Al. Cable. 3 Supplying & fixing 50mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as to GS 4 Supply & Fixing of compression type cable gland of the following sizes PVC/ Al cable with end finishing by Dowels solder less socket by crimping method as to G.S. 5 a) 4 core 35 sq.mm.PVC Ar./Al. Cable. 6 S&F 4 way Vertical TPNDB with MCCB incoming & TP/SP outgoings, as follows with vertical type busbar system, in SS enclosure (IP-43) double door comprising of neutral link incl. & provision for earthing attachment, concealed in wall incl. interconnection with suitable size of copper wires and earthing attachment, with cable entry Box at both ends, as per GS.Incoming - 415V 25KA 80A FPMCCB (1 no) Outgoing - 10KA 32A TPMCB - (2 no), 10KA 32A SPMCB - (6 no) [Make : Legrand/ LK/ ABB] 7 Supplying and fixing 250 V, 6-16A per way, 2+8 way SPN MCBDB with SS enclosure double-door with IP-42/43 protection with 40Amp DP Isolator as incomer and SPMCBs 6 to 16A (C Curve, 10kA)-8 nos as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Legrand/ ABB/ LK). 8 Supply & Fixing of 415V. Earth leakage protection Four pole- Sensitivity 300mA 40 amp DX3 RCCBs (Legrand Cat No. 411892 ) in Independent mounting 4 way Metal Encloser (Legrand Cat. No. 607884) concealed/surfaceon wall & mending goods the damages as par direction of E.I.C 9 Supplying and fixing 20A DP MCB with MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as to GS.(Make - LK/ Legrand/ ABB). 10 Supply & Fixing 240V 6/20A multi plug socket with 20A piano key type Switch (Anchor make) on sheet metal box incl.S&F 150 x 100 x 65 mm. MS (16 SWG) switch Board and Bakelite top cover on wall as per direction of EIC. 11 Supply & FixingDie cast housingwith unbreakable polycarbonate diffuser wall mounting LED bulkhead with IP-66 protection by nuts & bolts incl. necessary connections as required (Make- Philips cat no. WT202W LED6S NW PSU S2 PC) 12 Supply & Fixing 240 V, 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(For controling Light at Lift well) 13 Supply & Fixing 240 V, 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (For controling 2 Nos. Light at Lift pit) 14 Supply & laying of 1.1KV single core stranded FR PVC insulated & unsheathed copper wire in 20/25mm dia rigid PVC conduit pipe(precision) by shaddling on wall as per instruction of E.I.C. 15 a) 4x10sqmm + 2x6sqmm 16 b) 2x6sqmm + 1x4sqmm 17 c) 2x4sqmm + 1x2.5sqmm [for Power plug ] 18 d) 3x1.5sqmm 19 Finising the end of the following cu wire 20 a) 4x10sqmm + 2x6sqmm 21 b) 2x6sqmm + 1x4sqmm 22 c) 2x4sqmm + 1x2.5sqmm [for Power plug ] 23 Cutting Spl. Type Hole by Hevy duty Electric operated drill machine in concreate slab/ marbel 12’’ thick incl. the 8mm /12mm TMT rod cutting by welding machine for smoothly passing rigid conduit for connection switch board & SPNDB incl. mending the damages as par direction of E.I.C 24 Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish 25 a) Average run 8 mtr 26 b) On Board 27 S&Fixing 4ft. long Double LED tube light fittings complete with all accessories (Philips make Cat No.TMC 501P 2xT-LED 22W P3242) incl. S&F 2Nos. 20W LED tube (Master LEDtube 1200mm 18W865 T8 I-2100Lm) complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.as per GS. 28 S&F 16 inch dia wall mounted all metal body fan (EPC) on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length as directed by EIC 29 Supply and Fixing of 12 inch (30cm) dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection with Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 30 Supply & fixing Analog Timer Control Unit for single phase Exhaust Fan assembled with the MS Enclosure dulyphosphatised powder coatedwith din rail with IP-53 protection fixed on wall with front door locking arrangement and all necessary wiring and making connection as per direction of EIC. (Legrand- MaxiRex 4QTB daily with IP 53 box) 31 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as below (ISI-M G.I pipe). 32 Excavation of soil for installation of earth electrode and filling & ramming (For soft soil) 33 Withdrawing the paver blocks and cutting the concrete pathway for errection of the2 Nos. earthing and mending good the damages to original finish as directed by EIC. 34 Extra for providing masonary enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep complete with cemented brick work of 25 cm width duly plastered with cement morter CI hinged inspection cover of size 35.56 x35.56 cm with locking arrangement GI reducer incl. drilling holes on the GI pipe. 35 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as to GS. 36 Connecting the equipments to earth busbar S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. as to G.S. 37 Connecting the equipments to earth busbar including S & F 4 SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages as to GS 38 Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage from Gr Floor to 3rd Floor as directed by EIC. 39 Add: GST @18% on total amount ofabove item (i.e. from item Sl. No. 1.00 to 28.00) as applicable 40 Add: LWC @1% on total amount ofabove item (i.e. from item Sl. No. 1.00 to 29.00) as applicable 41 Note: 1) Quoted Rates are inclusive of the all taxes, duties & cess as applicable with cost of maintenance, servicing,supply & replacement of spares for 1 (One) year from the date of commissioning.2) Total is rounded off to the nearest rupee and inclusive of all taxes, duties & cess as applicable.

BRR:8434441 Tender For Providing Cctv Camera In Internal Village For Village Panchayat At Village Hol Pra Be. Tal. Shindkheda Dist.Dhule Under 15Th Finance Commission Gram Panchayat Level 60449564 (2022-23) 16 Ch Port Nvr , 2Mp Bullet Ip Camera , 4Ch Port Poe Switch , 2Tb Survilence Hdd , 32 Tv Screen Smart , 4 Nvr Rack , 2U Outdoor Rack , Square Pvc Box 5X5 , Rj45 Connector , Cat-6 Ethernet Cable , Fiber Cable , Nvr Installation And Fiting Charges , Installation Charges , Electrical Material And Other , Splicing Charges With Black Box , Sfp Transciever Module , Fiber Cable Installation

BRR:8434092 Tender For Term Contreact For Artificers Work At Bmc Under Ge (Central) Kolkata; 1 Old unserviceable Brick / Brick Bats of any description. CUM 750.00 2 Old unserviceable PCC block of any description. CUM 220.00 3 Old unserviceable Stone Boulder of any description. CUM 280.00 4 Old unserviceable Timber Scantling of any description. CUM 3400.00 5 Old unserviceable Chowkhat not exc 1.5 Sqm of any size including iron mongry of any description. EACH 170.00 6 Old unserviceable Chowkat exc 1.5 Sqm but n.exc 4 Sqm of any size including iron mongry of any description. EACH 250.00 7 Old unserviceable shutters not exc 1.0 Sqm of any size including iron mongeries of any description. PER LEAF 200.00 8 Old unserviceable shutters exc 1.0 Sqm but not exc 2.0 Sqm of any size including iron mongeries of any description. PER LEAF 250.00 9 Old unserviceable PVC frame with PVC shutter n exc 1.50 sqm with builder hardware. EACH 230.00 10 Old unserviceable rusted steel window/ventilator with fitting of any description. SQM 200.00 11 Old unserviceable Timber Boarding of any description SQM 32.00 12 Old unserviceable wooden fillets, rail, post, Purlin etc of any description. RM 5.00 13 Old unserviceable 4mm thick plywood of any description SQM 15.00 14 Old unserviceable 6mm thick plywood of any description SQM 20.00 15 Old unserviceable 12mm thick prelaminated particle board of any description SQM 22.00 16 Old unserviceable 18mm thick pre laminated particle board of any description. SQM 28.00 17 Old unserviceable 12mm thick particle board of any description SQM 18.00 18 Old unserviceable 18mm thick particle board of any description SQM 20.00 19 Old unserviceable Wall & ceiling Board of any description SQM 15.00 20 Old unserviceable CGI/PGI sheet of any description SQM 60.00 21 Old unserviceable fiber glass translucent sheet any thickness & description. SQM 70.00 22 Old unserviceable eaves gutter of any size & description. RM 5.00 23 Old unserviceable scrap iron of any description. KG 17.00 24 Old unserviceable Barbed wire / chain link fencing of any description KG 17.00 25 Old unserviceable GI wire cloth of any description. SQM 8.00 26 Old unserviceable aluminium scrap of any description KG 180.00 27 Old unserviceable aluminium sheet any gauge of any description SQM 20.00 28 Old unserviceable Curtain rod with brackets of any description RM 30.00 29 Old unserviceable PVC connection pipe , grating & shower rose of any description EACH 4.00 30 Old unserviceable PVC pipe 75 mm dia with accessories of any description RM 12.00 31 Old unserviceable PVC pipe 100/110 mm dia with accessories of any description. RM 15.00 32 Old unserviceable cat eye any description EACH 12.00 33 Old unserviceable delinator any description EACH 30.00 34 Old unserviceable solar studs any description. EACH 50.00 35 Old unserviceable glass sheet of any thickness and termination SQM 20.00 36 Old unserviceable Cupboard shelf. SQM 25.00 37 Old unserviceable door lock. EACH 100.00 38 Old unserviceable Continuous piano hinges. RM 10.00 39 Old unserviceable magnetic catch of PVC body. EACH 3.00 40 Old unserviceable Cloth drying ceiling hanger. EACH 50.00 41 Old unserviceable health faucet, CP toilet paper holder, CP soap dish, Towel ring, Jet spray, etc in any description EACH 25.00 42 Old unserviceable PVC Soap Dish, bib tap, stop cock and pillar tap, Shelve, seat cover, peg set, etc in any description. EACH 5.00 43 Old unserviceable CP wall mixture, WHB Mixture, Sink Mixer. EACH 200.00 44 Old unserviceable CP Bottle trap EACH 25.00 45 Old unserviceable swan CP neck pillar cock, telephonic shower, etc in any description EACH 150.00 46 Old unserviceable aluminum tower bolt, handles, hasp & staple, sliding door bolt, MS rate tail, door stopper etc. EACH 5.00 47 Old unserviceable hydraulic door closer, night latch, floor spring etc. EACH 35.00 48 Old unserviceable SWG pipe 150mm dia. RM 35.00 49 Old rusted GI long screw 40mm dia. EACH 8.00 50 Old rusted GI long screw 25mm dia. EACH 5.00 51 Old rusted GI long screw 20mm dia. EACH 3.00 52 Old unserviceable safety lever lock. EACH 30.00 53 Old unserviceable brass scrap of any description KG 200.00 54 Old unserviceable PVC scrap of any description. KG 25.00 55 Old unserviceable brass CP bib tap / stop valve/Pillar Tap/Shower rose/ of any description. EACH 25.00 56 Old unserviceable Low/High level Flushing cistern of any description EACH 60.00 57 Old unserviceable draining board / kitchen sink of any description. EACH 225.00 58 Old unserviceable PVC Tank of capacity upto 250 litres capacity of any description. EACH 175.00 59 Old unserviceable PVC Tank of capacity above 500 litres of any description. EACH 300.00 60 Old unserviceable PVC Tank of capacity above 1000 litres of any description. EACH 500.00 61 Old unserviceable PVC Tank of capacity above 1000 to 2000 litres of any description. EACH 750.00 62 Old unserviceable PVC tank cover/lid EACH 20.00 63 Old unserviceable 6mm thick Mirror of any size EACH 25.00 64 Old unserviceable PTMT Over Head Shower with Shower Arm 225 mm, Shelf of any description EACH 5.00 65 Old unserviceable Kitchen Plate rack of any description EACH 200.00 66 Old unserviceable RCPC cover EACH 40.00 67 Old unserviceable PVC pipe of 15/20 mm bore with fittings RM 10.00 68 Old unserviceable wooden scrap KG 30.00 69 Old unserviceable AC roof sheet any thickness & description SQM 25.00 70 Old unserviceable MS Butt hinges of any size EACH 2.00 71 Old unserviceable SS Butt hinges of any size EACH 5.00 72 Old unserviceable GI pipes 15mm bore medium grade of any description. RM 22 .00 73 -ditto- but 20mm bore RM 28.00 74 -ditto- but 25mm bore RM 32.00 75 -ditto- but 32mm bore RM 38.00 76 -ditto- but 40mm bore RM 40.00 77 -ditto- but 50mm bore RM 40.00 78 -ditto- but 80mm bore RM 85.00 79 -ditto- but 100mm bore RM 100.00 80 -ditto- but 150mm bore RM 155.00 81 Old unserviceable GI tube light grade of 40mm bore of any description. RM 38.00 82 Old unserviceable GI tube light grade of 50mm bore of any description. RM 38.00 83 Old unserviceable 15 / 20mm bore gate valve of any description. EACH 25.00 84 -ditto- but 25mm bore EACH 35.00 85 -ditto- but 40mm bore EACH 45.00 86 -ditto- but 50mm bore EACH 55.00 87 -ditto- but 80mm bore EACH 100.00 88 Old unserviceable 15mm / 20mm bore PTMT float valve of any description. EACH 10.00 89 Old unserviceable 25mm bore PTMT float valve of any description. EACH 6.00 90 Old unserviceable PVC pipe 110mm dia with accessories of any description. RM 12.00 91 Old unserviceable PVC pipe 75mm dia with accessories of any description. RM 10.00 92 Old unserviceable CI (Sand cast) pipe 100mm dia of any description. RM 40.00 93 Old unserviceable CI (Sand cast) pipe 75mm dia of any description. RM 25.00 94 Old unserviceable Cast iron fittings of any description. KG 17.00 95 Old unserviceable 80mm dia Cast iron sluice valve of any description. EACH 300.00 96 Old unserviceable 100mm bore Cast iron sluice valve of any description. EACH 400.00 97 Old unserviceable 150mm bore Cast iron sluice valve of any description. EACH 500.00 98 Old unserviceable check valve of different sizes EACH 150.00 99 Old unserviceable CI diaphragm valve / Butterfly valve any description. EACH 50.00 100 Old unserviceable 80mm bore Cast iron pipe of any description. RM 90.00 101 Old unserviceable 100mm bore Cast iron pipe of any description. RM 120.00 102 Old unserviceable 150mm bore Cast iron pipe of any description. RM 170.00 103 Lead retrieved from old CI pipe line of any description KG 60.00 104 Old unserviceable run lead joint of any size Each 20.00 105 Non return valve GM 15 mm to 25mm Each 25.00 106 Non return valve CI 80 mm Each 80.00 107 Non return valve CI 100 mm Each 100.00 108 Non return valve CI 150 mm Each 150.00 109 Old unserviceable DI pipe100mm bore RM 200.00 110 Old unserviceable Point wiring of 1.5 / 2.5 Sqmm wire of any description. POINT 35.00 111 -ditto- but 4 sqmm cable POINT 50.00 112 Old unserviceable Switch piano type 5/6 Amp / switch socket outlet / bell push / ceiling rose / regulator etc of any description. EACH 3.00 113 Old unserviceable Switch socket combination 3 pin 5/6/15 amp of any description. EACH 4.00 114 Old unserviceable MCB of any type & description. EACH 10.00 115 Old unserviceable Two pin earth plug and socket of any description. EACH 12.00 116 Old unserviceable Main switches / Distribution fuse board of any description. EACH 25.00 117 Old unserviceable Sub main wiring /service wire upto 10 Sqmm of any description. RM 15.00 118 Old unserviceable LED FTL fittings of any description. EACH 40.00 119 Old unserviceable bulk head fittings of any description. EACH 25.00 120 Old unserviceable copper ballast of FTL fittings of any description. EACH 20.00 121 Old unserviceable electronic ballast of FTL / CFL fittings of any description. EACH 20.00 122 Old unserviceable rectangular block of any description. EACH 2.00 123 Old unserviceable UG cable (Aluminium) of size 10 Sqmm 2 core of any description. RM 10.00 124 Old unserviceable UG cable (Aluminium) of size 16 Sqmm 2 core of any description. RM 15.00 125 Old unserviceable UG cable (Aluminium) of size 16 Sqmm 4 core of any description. RM 15.00 126 Old unserviceable UG cable (Aluminium) of size 25 Sqmm 3.5 core of any description. RM 20.00 127 Old unserviceable UG cable (Aluminium) of size 35 Sqmm 3.5 core of any description. RM 25.00 128 Old unserviceable UG cable (Aluminium) of size 120 Sqmm 3.5 core of any description. RM 60.00 129 Old unserviceable UG cable (Aluminium) of size 50 Sqmm 3.5 core of any description. RM 30.00 130 Old unserviceable UG cable (Aluminium) of size 70 Sqmm 3.5 core of any description. RM 40.00 131 Old unserviceable UG cable (Aluminium) of size 95 Sqmm 3.5 core of any description. RM 50.00 132 Old unserviceable UG cable (Aluminium) of size 150 Sqmm 3.5 core of any description. RM 70.00 133 Old unserviceable cross arm / bracing etc of any description KG 17.00 134 Old unserviceable stay assembly of any description EACH 20.00 135 Old unserviceable ACSR of any description KG 50.00 136 Old unserviceable house service bracket of any description EACH 30.00 137 Old unserviceable PVC separator of any description EACH 4.00 138 Old unserviceable Steel tubular pole 9m long of any description EACH 1500.00 139 Old unserviceable Steel tubular pole 11m long of any description EACH 2000.00 140 Old unserviceable GI wire 4mm dia of any description RM 2.00 141 Old unserviceable Insulator Pin/Shakle/Loop type of any description EACH 5.00 142 Old unserviceable Capacitor 15/10 mfd capacity of any description EACH 2.00 143 Old unserviceable street light fittings with accessories of any description EACH 200.00 144 Old unserviceable MCCBs/changeover switch of any type and Cap EACH 150.00 145 Old unserviceable Main switches EACH 25.00 146 Old unserviceable choke HPSV/MH lamps upto 150 W EACH 20.00 147 Old unserviceable choke HPSV/MH lamps 250 W to 400 W EACH 30.00 148 Old unserviceable DO fuse assy EACH 100.00 149 Old unserviceable Ignitor EACH 2.00 150 Old unserviceable Timer along with contactors, Tamper proof electronic energy meter etc EACH 25.00 151 Old unserviceable Earthing any type EACH SET 300.00 152 Old unserviceable aluminum strip any size RM 5.00 153 Old unserviceable heating element for 25Ltrs geyser EACH 30.00 154 Old unserviceable apparatus plate/split plate/ inspection plate for 25Ltrs geyser EACH 100.00 155 Old unserviceable thermostat switcht for 25Ltrs geyser EACH 12.00 156 Old unserviceable safety valve for 25Ltrs geyser EACH 10.00 157 Old unserviceable storage tank for 25Ltrs geyser EACH 150.00 158 Old unserviceable copper wire any type and any size. KG 200.00 159 Old unserviceable automatic home booster pressure pump EACH 1000.00 160 Old unserviceable feeder pillar box EACH 2000.00 161 Old unserviceable transformer oil LTR 1.00 162 Old unserviceable capacitor 5/10 KVAR EACH 40.00 163 Old unserviceable APFC relay EACH 300.00 164 Old unserviceable change over switch EACH 200.00 165 Old unserviceable micron Cartridge any type. EACH 15.00 166 Old unserviceable membrane. EACH 75.00 167 Old unserviceable multiport valve. EACH 60.00 168 Old unserviceable Resin. Litres 1.50 169 Old/ broken Pole EACH 150.00 170 Old unserviceable spindle any size any type EACH 120.00 171 Old unserviceable water pressure gauge EACH 30.00 172 Old unserviceable impeller of pump any size EACH 50.00 173 Old unserviceable suction valve for decrine dosing pump EACH 10.00 174 Old unserviceable sheet metal DB SPN 8 way Each 30.00 175 Old unserviceable sheet metal DB SPN 4 way Each 25.00 176 Old unserviceable sheet metal DB TPN 6 to 12 way Each 50.00 177 Old unserviceable copper winding in fan any type & description Kg 220.00 178 Old unserviceable power supply unit including fittings like starter with over load protection, MCB, plug socket etc Each 30.00

BRR:8434072 Tender For Term Contract For Otm Accommodation In Sector B Area At Patiala Under Ge (S) Patiala.; 1 Supplying and fixing in repairs Box Type Pressed Steel Windows with Fly Proof Shutters as per drawing no. TD-276R (Sheet No 1/4 to 4R/4) with 1.25 mm thick sheet (irrespective of whatever shown on the drawings), stainless steel wire gauge 0.36mm dia and 1.40 aperature (irrespective of whatever shown on the drawings) and grill of 8mm square bar (with or without provision of cooler opening) including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 for four nos for each window complete all as specified and directed. Note : (i) Glass, wire cloth and grill etc are deemed to be included in the unit rates and no payment for any these items shall be done separately. (ii) TD-276R (Sheet No. ¼, 2/4, 3/4 & 4R/4) not attached with the tender documents and the same may be checked in the office of Engineer-in-Charge. Square Metre 5,250.00 2 S&F single piece vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap, snow white colour of size 655 x 355 x 735 mm of make Cera (Ceremony 5D) or equivalent make mentioned hereinafter including connection to drain (or out going pipe) and to flushing pipe, anti syphonagee pipe,etc., with flush pipe and incl. slim soft close seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified and directed. Each 22,500.00 3 S&F in repair brass chrome finish wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe for hot and cold water fancy type fixed with iron pipe 15 mm dia of make Cera cat part No. F1099403 or equivalent make mentioned hereinafter complete all as specified and directed. Each 7,500.00 4 S&F in repairs Health Faucet ABS body with 1 meter SS braided connection pipe in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified and directed. Each 1,500.00 5 S&F sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel D bracket fixed and railing complete all as specified and directed. Each 750.00 6 S&F vitreous china premium/1st quality wash basin (under counter), snow white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 7 S&F in repair Wall Hung Basin of size 510X410x160 mm with thin rim snow white colour without pedestal including cutting for and pinning in ends of brackets or erecting stand (bracket includies) and making good the surface/joints with white cement of make Cera (Chino) or equivalent make mentioned hereinafter including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 8 S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed. Running Metre 225.00 9 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Note : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates. Square Metre 2500.00 10 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cu.m complete all as specified and directed. Square Metre 2800.00 11 S&F steel nickel plated auto closing concealed hinges with integrated soft closing mechanism with 35 mm cup diameter of 0 crank or 8 crank openable at 110 degree/ 95 degree alongwith mounting plates and cover caps all as per manufacturers instructions for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Each pair/set 650.00 12 S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. Each pair/set 750.00 13 S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished of make Harrison cat part No. 0812 or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 300.00 14 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 15 S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified and directed. Each 120.00 16 S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed. Running Metre 225.00 17 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified and directed. Each 75.00 18 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 19 S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position all as specified and directed. Kilogram 1,800.00 20 S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed. Each 4,500.00 21 S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturers instructions all as specified and directed. Running Metre 750.00 22 S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed. Each 675.00 23 S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish complete fixed in position all as specified and directed. Square Metre 2,250.00 24 Supply and fixing in repair PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed. Each 3,000.00 25 S & F ( in Repair) S/S plate rack size ( 900x900x250mm) of standard size weight not less then 5 kg complete all as specified and directed. Each 3,750.00 26 S&F CP Bottle Trap 32 mm 300mm with inlet and oulet screwed for pipe and connections with including necessary accessories complete all as specified and directed. Each 1,800.00 27 Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Square Metre 7,500.00 28 Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkhats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Square Metre 6,000.00 29 M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces complete all as specified and directed. Note:- (i) taking down plaster and applying of 15mm thick plaster will be measured separately (ii) :- after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1:3 with mixing of WPC URP 301. Square Metre 500.00 30 S&F PVC Wall panelling of hollow sections of size 5-6 mm thick (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 600.00 31 S&F WPC Wall panelling of fluted/louvers/hollow sections/ of size 12- 23 mm thickness (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 1,200.00 32 S&F 12mm thick HDF board both side decorative compact laminate fire retardant/ termite proof/ BWP/ borer proof of approved colour, shade and sizes as in cubicals with 10 years guarantee for the board against any moisture including S&F of following accessories/ hardware with 5 years guarantee for each cubical complete fixed in position in all respect all as specified and directed. (i) Stainless Steel Adjustable Shoes/Legs 316 Grade 150mm High - 2 nos (ii) Stainless Steel Gravity Hinges 304 Grade - 3 nos (iii) Stainless Steel Coat Hook 304 Grade - 1 no (iv) Stainless Steel Door Knob 304 Grade - 1 no (v) Stainless Steel Indicator Lock 304 Grade - 1 no (vi) Profile U Channel (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (vii) Door Stop (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (viii) Noise Defending Tape/ Gasket Rubber Length-1.82m (6 Feet) each - 1 no (ix) Hollow circular pipe of aluminium powder coated of size 30- 40mm for Top Rail of cubicals (x) Corner connector, wall brackets, s/s screws and wall plugs as required Square Metre 6,750.00 33 M&L for 3mm thick ACP sheets of any colour as approved as in wall cladding/ceiling etc. With 12mm groove of silicon water proof and covering all screws on ACP by silicon including aluminium frame work of section 40x25mm and of 14 gauge thickness fixed to existing wall/structure with 75mm stainless steel screws and members interconnected with 40/20mm stainless steel screws, also including all necessary use of all double line scaffolding, trestles, ladders, cradles etc. necessary for execution of work and protective measures including hoisting and lowering, fixed to frame work at height not exceeding 8 mtrs all as specified and directed. Square Metre 2,700.00 34 M&L for Glazed Vitrified Tiles (Premium/1st quality) of size 800 x 1600 in floors etc. set, laid and jointed in suitable adhesive (flexiest H-40 or equivalent as approved) and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved) all as specified and directed. Square Metre 2,250.00 35 S&F double cylinder cam action floor spring with closing force EN4 suitable for max door weight 150 Kg, max door width 1100mm with closing speed 130-10º, final closing speed 10-0º, hold open - 90º, approx weight of floor spring 6Kg, with installation dimensions of size 306x108x40mm of make Ozone (FS-9400-STD-STD) or equivalent make mentioned hereinafter fixed in position as per instructions of manufacture including S&F top fittings/hardware from same manufacturer complete all as specified and directed. Each 9,500.00 36 S&F H type pull glass door Handles of size 25x300/450 mm stainless steel 304 Grade with back to back installation incl all accessories like gasket, grub screws etc fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 1,500.00 37 S&F re-informing rod 19mm dia at top of showers etc stainless steel incl all accessories fixed in position as per instructions of manufacture complete all as specified and directed. Running Metre 800.00 38 S&F all types hinges (wall to glass/glass to glass) stainless steel 304 Grade and PSS finish suitable for 10mm glass as in showers complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 4,000.00 39 S&F all types connectors/ brackets/ catchers etc (L-shaped, wall to glass, glass to glass, floor to glass) stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 500.00 40 S&F all types patch fittings stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each 2,500.00 41 M&L repairing potholes in roads with cold mix instant pothole repairing mix including preparation, cleaning, applying/spraying a coat of emulsion RS1 and ramming & levelling etc as per manufacturers instructions complete all as specified and directed. Kilogram 50.00 42 M & L for 2.5mm thick road marking thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfaces complete all as specified and directed. Square Metre 350.00 1. Old Brick work/brick bats Cum 500.00 2. Chowkhats with shutters not exceeding 1.5 Sqr mtr incl iron mongery & hold fast Each 500.00 3. Chowkhats with shutters exceeding 1.5 sqr mtr but not exceeding 4 Sqr mtr incl iron Each 600.00 4. Old unserviceable shutters not exc 2.0 Sqm including iron mongeries Sqm 200.00 5. Old unserviceable PVC frame with PVC shutter n exc 1.50 sqm with unserviceable builder hardware. Sqm 100.00 6. Old unserviceable rusted steel window Sqrn 500.00 7. Old unserviceable ventilator with fitting of an description. Sqm 100.00 8. Old unserviceable Timber Boarding of any description Sqrn 100.00 9. Old unserviceable Timber Fillets rails etc of any description under 40 Sq cm in section. RM 10.00 10. Old wire gauge Sqm 50.00 11. Old unserviceable scrap iron of any description Kg 35.00 12. Old unserviceable aluminium scrap of any description Kg 120.00 13. Old unserviceable iron mongery of any size & description. Each 5.00 14. Old unserviceable plywood of any description Sqm 25.00 15. Old unserviceable board of any description Sqm 50.00 16. Old Cup board shutters of any description Sqm 50.00 17. Old ceiling board incl cover fillets Sqm 10.00 18. Old AC sheets Sqm 20.00 19. Old brick tiles/bats Sqm 20.00 20. Old curtain rods RM 5.00 21. Old rain water pipe of any description incl fittings RM 25.00 22. Old water storage tank of any description incl fittings Each 500.00 23. Old pillar cock, bib cock, stop cock, angle valve of any description. Each 35.00 24. Old unserviceable 15mm bore PTMT bib tap / pillar / stop valve of any description. Each 15.00 25. Old cistern Each 50.00 26. Steel sink Each 100.00 27. Old CI pipe 50/75/100 mm bore without fittings RM 100.00 28. Old CI fitting 75/100 mm bore Each 50.00 29. Old structural steel Qtl 3500.00 30. Old RCC Post or strut RM 100.00 31. Old Chain link fencing mesh Sqm 60.00 32. Old unserviceable CGI Sheets incl ‘J’ hooks sqm 50.00 33. Unserviceable brick tiles sqm 20.00 34. Unserviceable bib taps, stop cock, pillar tap, shower rose, Angle cock, Sink cock. Towel Rail Brass / CP Each 35.00 35. Old WHB with brackets Each 20.00 36. Unserviceable Steel sink Each 100.00 37. Unserviceable flushing cistern incl fitting Each 50.00 38. Unserviceable gate valves 20mm Brass Each 80.00 39. Old scrap steel / iron Kg 35.00 40. Unserviceable CI pipe 100/75 mm dia RM 100.00 41. Unserviceable CI fitting of any size Kg 30.00 42. Old U/S cat eyes of any description Each 10.00 43. Old U/S Delinator of any description Each 20.00 44. Old U/S Convex Mirror of any description Each 50.00 45. Brick Edging of any description RM 5.00 46. Old GI Tubing 15mm bore RM 20.00 47. Old GI Tubing 20mm bore RM 30.00 48. Old GI tubing 25mm bore RM 40.00 49. Old GI tubing 40mm bore RM 50.00 50. Old GI tubing 50mm bore RM 80.00 51. Old GI tubing 80mm bore RN 100.00 52. Old GI tubing 100mm bore RM 150.00 53. Old u/s Gate Valve 20mm die bore Each 35.00 54. Old u/s Gate Valve 25mm dia bore Each 45.00 55. Old u/s Gate Valve 40mm dia bore Each 82.00 56. Old u/s Gate Valve 50mm dia bore Each 100.00 57. Old U/s Sluice valve of 200mm die bore CI Each 750.00 58. Old U/s Sluice valve of 150mm dia bore CI Each 550.00 59. Old U/s Sluice valve of 100mm dia bore CI Each 350.00 60. Old U/s Sluice valve of 80mm die bore CI Each 250.00 61. Old U/s broken Cl/DI pipe of 200mm dia RM 300.00 62. Old U/s broken Cl/DI pipe of 150mm die RM 250.00 63. Old U/s broken Cl/DI pipe of 100mm dia - RM 150.00 64. Old U/s broken Cl/DI pipe of 80mm dia RM 100.00 65. Old Cl/DI fitting Kg 30.00 66. Old U/S Pump Shaft any type Each 105.00 67. Old U/s Brushes Each 22.00 68. Old U/s Impeller obtained from submersible pump set Each 100.00 69. Old U/s Impeller centrifugal / Non clog pump set Each 130.00 70. Old U/s thrust plate Each 10.00 71. Old U/s stage casing bowl Each 30.00 72. Old U/s Coupling assy Each 25.00 73. Old U/s thrust bearing housing Each 30.00 74. Old U/s Thrust pads Each 20.00 75. Old unsv tyre coupling Each 20.00 76. Old UNSV Star delta starter 40 HP Each 300.00 77. Old DOL Starter any type 10 HP Each 120.00 78. Run lead joint 80mm dia Each 40.00 79. Run lead joint 100mm dia Each 50.00 80. Run lead joint 150mm dia Each 60.00 81. Run lead joint 200mm dia Each 80.00 82. MS Spindle 100 mm Sluice valve Each 20.00 83. MS Spindle 150 mm Sluice valve Each 25.00 84. MS Spindle 200 mm Sluice valve Each 30.00 85. Submersible cable 16 sqmm 3 Core RM 25.00 86. Submersible cable 10 sqmm 3 Core RM 15.00 87. Old unsv MCCB Each 20.00 88. Old unsv earthing material Each 100.00 89. Scrap of unserviceable brass Kg 150.00 90. Old wooden or PVC or steel chowkhats with shutters n exc 1.5 sqm each incl iron mongery Each 400.00 91. Old skeleton shutters with iron mongery Each 300.00 92. Old Steel window with frame and shutter of any size complete Each 500.00 93. Old steel cupboard with frame and shutter of any size complete Each 250.00 94. Old steel ventilator of any size complete Each 200.00 95. Old curtain rod of any size description RM 5.00 96. U/s Old PVC water tank of capacity exc. 1000 litre 500 but n.exc Each 450.00 97. Old CI pipe 100 mm dia pipe of any description such as Nahani trap Bends TEE etc RM 100.00 98. Old PVC pipe for rain water of 110 mm dia or 75 mm dia of any size or description RM 25.00 99. Old looking mirror of any size/ description Each 10.00 100. Old grating of any size/ description Each 10.00 101. Old PVC connecting pipe of any size description Each 10.00 102. Old PVC pipe Bends pipe of 110 mm dia or 75 mm dia of any size description Each 5.00 103. Old U/S wiring with switches, sockets, ceiling roses, regulators etc Point 25.00 104. Old U/S Bulk Head Fitting Each 10.00 105. Old U/S Fan Regulator Each 5.00 106. Old U/S MCB DB TPN Each 50.00 107. Old U/S DB SPN 8 way Each 25.00 108. Old U/S MCB Each 2.00 109. Old U/S Sub main Wiring RM 10.00 110. Old Switch, socket, regular, regulator lamp holder, call bell etc Point 25.00 111. Old Unsv bldg security light Each 25.00 112. Old PVC doors Intl frame of any size Incl hardware etc 1.0 Sqm and n.exc 2.00 s.q.m Each 300.00 113. Old wooden door Intl MS frame of any size Incl hardware etc 1.0 s.q.m and n.exc 2.00 s.q.m Each 350.00 114. Old iron stone obtained from demolition of RCC work KG 30.00 115. Old red stone obtained from flooring of any description or size or thickness etc sqm 80.00 116. UNSV Old PVC water tank of capacity 200 to 500 litre Each 250.00 117. Old wooden windows of any description/size and hardware etc Each 150.00 118. Old u/s wall and ceiling boards any thickness, inc!uding cover fillets/frame work of any description Sqm 5.00 119. Old AC sheet or roof of any size Sqm 20.00 120. U/s EWC of any pattern Each 20.00 121. Old CI Cowl of any dia or description Each 30.00 122. Old Granite, Kota and marble etc of any size Sqm 30.00 123. Old U/s rolling shutter of any size or description Each 2000.00 124. Old u/s high level CI flushing cistern of any description Each 300.00 125. U/S light fittings tube light 4 feet Each 25.00 126. Old U/S PVC scrap Kg 20.00 127. Old Aluminum Scrap Kg 150.00 128. Old Copper Scrap Kg 380.00

BRR:8434071 Tender For Term Contract For Artificers Work For Otm And Md Accn At Sangrur Under Ge (S) Patiala; 1. Old Brick work/brick bats Cum 500.00 2. Chowkhats with shutters not exceeding 1.5 Sqr mtr incl iron mongery & hold fast Each 500.00 3. Chowkhats with shutters exceeding 1.5 sqr mtr but not exceeding 4 Sqr mtr incl iron Each 600.00 4. Old unserviceable shutters not exc 2.0 Sqm including iron mongeries Sqm 200.00 5. Old unserviceable PVC frame with PVC shutter n exc 1.50 sqm with unserviceable builder hardware. Sqm 100.00 6. Old unserviceable rusted steel window Sqrn 500.00 7. Old unserviceable ventilator with fitting of an description. Sqm 100.00 8. Old unserviceable Timber Boarding of any description Sqrn 100.00 9. Old unserviceable Timber Fillets rails etc of any description under 40 Sq cm in section. RM 10.00 10. Old wire gauge Sqm 50.00 11. Old unserviceable scrap iron of any description Kg 35.00 12. Old unserviceable aluminium scrap of any description Kg 120.00 13. Old unserviceable iron mongery of any size & description. Each 5.00 14. Old unserviceable plywood of any description Sqm 25.00 15. Old unserviceable board of any description Sqm 50.00 16. Old Cup board shutters of any description Sqm 50.00 17. Old ceiling board incl cover fillets Sqm 10.00 18. Old AC sheets Sqm 20.00 19. Old brick tiles/bats Sqm 20.00 20. Old curtain rods RM 5.00 21. Old rain water pipe of any description incl fittings RM 25.00 22. Old water storage tank of any description incl fittings Each 500.00 23. Old pillar cock, bib cock, stop cock, angle valve of any description. Each 35.00 24. Old unserviceable 15mm bore PTMT bib tap / pillar / stop valve of any description. Each 15.00 25. Old flushing cistern Each 50.00 26. Old unsv Steel sink Each 100.00 27. Old CI pipe 50/75/100 mm bore without fittings RM 100.00 28. Old CI fitting 75/100 mm bore Each 50.00 29. Old structural steel Qtl 3500.00 30. Old RCC Post or strut RM 100.00 31. Old Chain link fencing mesh Sqm 60.00 32. Old unserviceable CGI Sheets incl ‘J’ hooks sqm 50.00 33. Unserviceable brick tiles sqm 20.00 34. Unserviceable bib taps, stop cock, pillar tap, shower rose, Angle cock, Sink cock. Towel Rail Brass / CP Each 35.00 35. Old WHB with brackets Each 20.00 36. Unserviceable Steel sink Each 100.00 37. Unserviceable flushing cistern incl fitting Each 50.00 38. Unserviceable gate valves 20mm Brass Each 80.00 39. Old scrap steel / iron Kg 35.00 40. Unserviceable CI pipe 100/75 mm dia RM 100.00 41. Unserviceable CI fitting of any size Kg 30.00 42. Old U/S cat eyes of any description Each 10.00 43. Old U/S Delinator of any description Each 20.00 44. Old U/S Convex Mirror of any description Each 50.00 45. Brick Edging of any description RM 5.00 46. Old GI Tubing 15mm bore RM 20.00 47. Old GI Tubing 20mm bore RM 30.00 48. Old GI tubing 25mm bore RM 40.00 49. Old GI tubing 40mm bore RM 50.00 50. Old GI tubing 50mm bore RM 80.00 51. Old GI tubing 80mm bore RN 100.00 52. Old GI tubing 100mm bore RM 150.00 53. Old u/s Gate Valve 20mm die bore Each 35.00 54. Old u/s Gate Valve 25mm dia bore Each 45.00 55. Old u/s Gate Valve 40mm dia bore Each 82.00 56. Old u/s Gate Valve 50mm dia bore Each 100.00 57. Old U/s Sluice valve of 200mm die bore CI Each 750.00 58. Old U/s Sluice valve of 150mm dia bore CI Each 550.00 59. Old U/s Sluice valve of 100mm dia bore CI Each 350.00 60. Old U/s Sluice valve of 80mm die bore CI Each 250.00 61. Old U/s broken Cl/DI pipe of 200mm dia RM 300.00 62. Old U/s broken Cl/DI pipe of 150mm die RM 250.00 63. Old U/s broken Cl/DI pipe of 100mm dia - RM 150.00 64. Old U/s broken Cl/DI pipe of 80mm dia RM 100.00 65. Old Cl/DI fitting Kg 30.00 66. Old U/S Pump Shaft any type Each 105.00 67. Old U/s Brushes Each 22.00 68. Old U/s Impeller obtained from submersible pump set Each 100.00 69. Old U/s Impeller centrifugal / Non clog pump set Each 130.00 70. Old U/s thrust plate Each 10.00 71. Old U/s stage casing bowl Each 30.00 72. Old U/s Coupling assy Each 25.00 73. Old U/s thrust bearing housing Each 30.00 74. Old U/s Thrust pads Each 20.00 75. Old unsv tyre coupling Each 20.00 76. Old UNSV Star delta starter 40 HP Each 300.00 77. Old DOL Starter any type 10 HP Each 120.00 78. Run lead joint 80mm dia Each 40.00 79. Run lead joint 100mm dia Each 50.00 80. Run lead joint 150mm dia Each 60.00 81. Run lead joint 200mm dia Each 80.00 82. MS Spindle 100 mm Sluice valve Each 20.00 83. MS Spindle 150 mm Sluice valve Each 25.00 84. MS Spindle 200 mm Sluice valve Each 30.00 85. Submersible cable 16 sqmm 3 Core RM 25.00 86. Submersible cable 10 sqmm 3 Core RM 15.00 87. Old unsv MCCB Each 20.00 88. Old unsv earthing material Each 100.00 89. Scrap of unserviceable brass Kg 150.00 90. Old wooden or PVC or steel chowkhats with shutters n exc 1.5 sqm each incl iron mongery Each 400.00 91. Old skeleton shutters with iron mongery Each 300.00 92. Old Steel window with frame and shutter of any size complete Each 500.00 93. Old steel cupboard with frame and shutter of any size complete Each 250.00 94. Old steel ventilator of any size complete Each 200.00 95. Old curtain rod of any size description RM 5.00 96. U/s Old PVC water tank of capacity exc. 1000 litre 500 but n.exc Each 450.00 97. Old CI pipe 100 mm dia pipe of any description such as Nahani trap Bends TEE etc RM 100.00 98. Old PVC pipe for rain water of 110 mm dia or 75 mm dia of any size or description RM 25.00 99. Old looking mirror of any size/ description Each 10.00 100. Old grating of any size/ description Each 10.00 101. Old PVC connecting pipe of any size description Each 10.00 102. Old PVC pipe Bends pipe of 110 mm dia or 75 mm dia of any size description Each 5.00 103. Old U/S wiring with switches, sockets, ceiling roses, regulators etc Point 25.00 104. Old U/S Bulk Head Fitting Each 10.00 105. Old U/S Fan Regulator Each 5.00 106. Old U/S MCB DB TPN Each 50.00 107. Old U/S DB SPN 8 way Each 25.00 108. Old U/S MCB Each 2.00 109. Old U/S Sub main Wiring RM 10.00 110. Old Switch, socket, regular, regulator lamp holder, call bell etc Point 25.00 111. Old Unsv bldg security light Each 25.00 112. Old PVC doors Intl frame of any size Incl hardware etc 1.0 Sqm and n.exc 2.00 s.q.m Each 300.00 113. Old wooden door Intl MS frame of any size Incl hardware etc 1.0 s.q.m and n.exc 2.00 s.q.m Each 350.00 114. Old iron stone obtained from demolition of RCC work KG 30.00 115. Old red stone obtained from flooring of any description or size or thickness etc sqm 80.00 116. UNSV Old PVC water tank of capacity 200 to 500 litre Each 250.00 117. Old wooden windows of any description/size and hardware etc Each 150.00 118. Old u/s wall and ceiling boards any thickness, inc!uding cover fillets/frame work of any description Sqm 5.00 119. Old AC sheet or roof of any size Sqm 20.00 120. U/s EWC of any pattern Each 20.00 121. Old CI Cowl of any dia or description Each 30.00 122. Old Granite, Kota and marble etc of any size Sqm 30.00 123. Old U/s rolling shutter of any size or description Each 2000.00 124. Old u/s high level CI flushing cistern of any description Each 300.00 125. U/S light fittings tube light 4 feet Each 25.00 126. Old U/S PVC scrap Kg 20.00 127. Old Aluminum Scrap Kg 150.00 128. Old Copper Scrap Kg 380.00

BRR:8434070 Tender For Term Contract For Artificers Work For Otm And Md Accn At Nabha Under Ge (S) Patiala.; 1 Supplying and fixing in repairs Box Type Pressed Steel Windows with Fly Proof Shutters as per drawing no. TD-276R (Sheet No 1/4 to 4R/4) with 1.25 mm thick sheet (irrespective of whatever shown on the drawings), stainless steel wire gauge 0.36mm dia and 1.40 aperature (irrespective of whatever shown on the drawings) and grill of 8mm square bar (with or without provision of cooler opening) including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 for four nos for each window complete all as specified and directed. Note : (i) Glass, wire cloth and grill etc are deemed to be included in the unit rates and no payment for any these items shall be done separately. (ii) TD-276R (Sheet No. ¼, 2/4, 3/4 & 4R/4) not attached with the tender documents and the same may be checked in the office of Engineer-in-Charge. Square Metre 5,250.00 2 S&F single piece vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap, snow white colour of size 655 x 355 x 735 mm of make Cera (Ceremony 5D) or equivalent make mentioned hereinafter including connection to drain (or out going pipe) and to flushing pipe, anti syphonagee pipe,etc., with flush pipe and incl. slim soft close seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified and directed. Each 22,500.00 3 S&F in repair brass chrome finish wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe for hot and cold water fancy type fixed with iron pipe 15 mm dia of make Cera cat part No. F1099403 or equivalent make mentioned hereinafter complete all as specified and directed. Each 7,500.00 4 S&F in repairs Health Faucet ABS body with 1 meter SS braided connection pipe in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified and directed. Each 1,500.00 5 S&F sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel D bracket fixed and railing complete all as specified and directed. Each 750.00 6 S&F vitreous china premium/1st quality wash basin (under counter), snow white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 7 S&F in repair Wall Hung Basin of size 510X410x160 mm with thin rim snow white colour without pedestal including cutting for and pinning in ends of brackets or erecting stand (bracket includies) and making good the surface/joints with white cement of make Cera (Chino) or equivalent make mentioned hereinafter including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 8 S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed. Running Metre 225.00 9 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Note : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates. Square Metre 2500.00 10 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cu.m complete all as specified and directed. Square Metre 2800.00 11 S&F steel nickel plated auto closing concealed hinges with integrated soft closing mechanism with 35 mm cup diameter of 0 crank or 8 crank openable at 110 degree/ 95 degree alongwith mounting plates and cover caps all as per manufacturers instructions for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Each pair/set 650.00 12 S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. Each pair/set 750.00 13 S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished of make Harrison cat part No. 0812 or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 300.00 14 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 15 S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified and directed. Each 120.00 16 S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed. Running Metre 225.00 17 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified and directed. Each 75.00 18 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 19 S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position all as specified and directed. Kilogram 1,800.00 20 S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed. Each 4,500.00 21 S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturers instructions all as specified and directed. Running Metre 750.00 22 S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed. Each 675.00 23 S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish complete fixed in position all as specified and directed. Square Metre 2,250.00 24 Supply and fixing in repair PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed. Each 3,000.00 25 S & F ( in Repair) S/S plate rack size ( 900x900x250mm) of standard size weight not less then 5 kg complete all as specified and directed. Each 3,750.00 26 S&F CP Bottle Trap 32 mm 300mm with inlet and oulet screwed for pipe and connections with including necessary accessories complete all as specified and directed. Each 1,800.00 27 Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Square Metre 7,500.00 28 Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkhats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Square Metre 6,000.00 29 M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces complete all as specified and directed. Note:- (i) taking down plaster and applying of 15mm thick plaster will be measured separately (ii) :- after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1:3 with mixing of WPC URP 301. Square Metre 500.00 30 S&F PVC Wall panelling of hollow sections of size 5-6 mm thick (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 600.00 31 S&F WPC Wall panelling of fluted/louvers/hollow sections/ of size 12- 23 mm thickness (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 1,200.00 32 S&F 12mm thick HDF board both side decorative compact laminate fire retardant/ termite proof/ BWP/ borer proof of approved colour, shade and sizes as in cubicals with 10 years guarantee for the board against any moisture including S&F of following accessories/ hardware with 5 years guarantee for each cubical complete fixed in position in all respect all as specified and directed. (i) Stainless Steel Adjustable Shoes/Legs 316 Grade 150mm High - 2 nos (ii) Stainless Steel Gravity Hinges 304 Grade - 3 nos (iii) Stainless Steel Coat Hook 304 Grade - 1 no (iv) Stainless Steel Door Knob 304 Grade - 1 no (v) Stainless Steel Indicator Lock 304 Grade - 1 no (vi) Profile U Channel (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (vii) Door Stop (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (viii) Noise Defending Tape/ Gasket Rubber Length-1.82m (6 Feet) each - 1 no (ix) Hollow circular pipe of aluminium powder coated of size 30- 40mm for Top Rail of cubicals (x) Corner connector, wall brackets, s/s screws and wall plugs as required Square Metre 6,750.00 33 M&L for 3mm thick ACP sheets of any colour as approved as in wall cladding/ceiling etc. With 12mm groove of silicon water proof and covering all screws on ACP by silicon including aluminium frame work of section 40x25mm and of 14 gauge thickness fixed to existing wall/structure with 75mm stainless steel screws and members interconnected with 40/20mm stainless steel screws, also including all necessary use of all double line scaffolding, trestles, ladders, cradles etc. necessary for execution of work and protective measures including hoisting and lowering, fixed to frame work at height not exceeding 8 mtrs all as specified and directed. Square Metre 2,700.00 34 M&L for Glazed Vitrified Tiles (Premium/1st quality) of size 800 x 1600 in floors etc. set, laid and jointed in suitable adhesive (flexiest H-40 or equivalent as approved) and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved) all as specified and directed. Square Metre 2,250.00 35 S&F double cylinder cam action floor spring with closing force EN4 suitable for max door weight 150 Kg, max door width 1100mm with closing speed 130-10º, final closing speed 10-0º, hold open - 90º, approx weight of floor spring 6Kg, with installation dimensions of size 306x108x40mm of make Ozone (FS-9400-STD-STD) or equivalent make mentioned hereinafter fixed in position as per instructions of manufacture including S&F top fittings/hardware from same manufacturer complete all as specified and directed. Each 9,500.00 36 S&F H type pull glass door Handles of size 25x300/450 mm stainless steel 304 Grade with back to back installation incl all accessories like gasket, grub screws etc fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 1,500.00 37 S&F re-informing rod 19mm dia at top of showers etc stainless steel incl all accessories fixed in position as per instructions of manufacture complete all as specified and directed. Running Metre 800.00 38 S&F all types hinges (wall to glass/glass to glass) stainless steel 304 Grade and PSS finish suitable for 10mm glass as in showers complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 4,000.00 39 S&F all types connectors/ brackets/ catchers etc (L-shaped, wall to glass, glass to glass, floor to glass) stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 500.00 40 S&F all types patch fittings stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each 2,500.00 41 M&L repairing potholes in roads with cold mix instant pothole repairing mix including preparation, cleaning, applying/spraying a coat of emulsion RS1 and ramming & levelling etc as per manufacturers instructions complete all as specified and directed. Kilogram 50.00 42 M & L for 2.5mm thick road marking thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfaces complete all as specified and directed. Square Metre 350.00 1. Old Brick work/brick bats Cum 500.00 2. Chowkhats with shutters not exceeding 1.5 Sqr mtr incl iron mongery & hold fast Each 500.00 3. Chowkhats with shutters exceeding 1.5 sqr mtr but not exceeding 4 Sqr mtr incl iron Each 600.00 4. Old unserviceable shutters not exc 2.0 Sqm including iron mongeries Sqm 200.00 5. Old unserviceable PVC frame with PVC shutter n exc 1.50 sqm with unserviceable builder hardware. Sqm 100.00 6. Old unserviceable rusted steel window Sqrn 500.00 7. Old unserviceable ventilator with fitting of an description. Sqm 100.00 8. Old unserviceable Timber Boarding of any description Sqrn 100.00 9. Old unserviceable Timber Fillets rails etc of any description under 40 Sq cm in section. RM 10.00 10. Old wire gauge Sqm 50.00 11. Old unserviceable scrap iron of any description Kg 35.00 12. Old unserviceable aluminium scrap of any description Kg 120.00 13. Old unserviceable iron mongery of any size & description. Each 5.00 14. Old unserviceable plywood of any description Sqm 25.00 15. Old unserviceable board of any description Sqm 50.00 16. Old Cup board shutters of any description Sqm 50.00 17. Old ceiling board incl cover fillets Sqm 10.00 18. Old AC sheets Sqm 20.00 19. Old brick tiles/bats Sqm 20.00 20. Old curtain rods RM 5.00 21. Old rain water pipe of any description incl fittings RM 25.00 22. Old water storage tank of any description incl fittings Each 500.00 23. Old pillar cock, bib cock, stop cock, angle valve of any description. Each 35.00 24. Old unserviceable 15mm bore PTMT bib tap / pillar / stop valve of any description. Each 15.00 25. Old flushing cistern Each 50.00 26. Old unsv Steel sink Each 100.00 27. Old CI pipe 50/75/100 mm bore without fittings RM 100.00 28. Old CI fitting 75/100 mm bore Each 50.00 29. Old structural steel Qtl 3500.00 30. Old RCC Post or strut RM 100.00 31. Old Chain link fencing mesh Sqm 60.00 32. Old unserviceable CGI Sheets incl ‘J’ hooks sqm 50.00 33. Unserviceable brick tiles sqm 20.00 34. Unserviceable bib taps, stop cock, pillar tap, shower rose, Angle cock, Sink cock. Towel Rail Brass / CP Each 35.00 35. Old WHB with brackets Each 20.00 36. Unserviceable Steel sink Each 100.00 37. Unserviceable flushing cistern incl fitting Each 50.00 38. Unserviceable gate valves 20mm Brass Each 80.00 39. Old scrap steel / iron Kg 35.00 40. Unserviceable CI pipe 100/75 mm dia RM 100.00 41. Unserviceable CI fitting of any size Kg 30.00 42. Old U/S cat eyes of any description Each 10.00 43. Old U/S Delinator of any description Each 20.00 44. Old U/S Convex Mirror of any description Each 50.00 45. Brick Edging of any description RM 5.00 46. Old GI Tubing 15mm bore RM 20.00 47. Old GI Tubing 20mm bore RM 30.00 48. Old GI tubing 25mm bore RM 40.00 49. Old GI tubing 40mm bore RM 50.00 50. Old GI tubing 50mm bore RM 80.00 51. Old GI tubing 80mm bore RN 100.00 52. Old GI tubing 100mm bore RM 150.00 53. Old u/s Gate Valve 20mm die bore Each 35.00 54. Old u/s Gate Valve 25mm dia bore Each 45.00 55. Old u/s Gate Valve 40mm dia bore Each 82.00 56. Old u/s Gate Valve 50mm dia bore Each 100.00 57. Old U/s Sluice valve of 200mm die bore CI Each 750.00 58. Old U/s Sluice valve of 150mm dia bore CI Each 550.00 59. Old U/s Sluice valve of 100mm dia bore CI Each 350.00 60. Old U/s Sluice valve of 80mm die bore CI Each 250.00 61. Old U/s broken Cl/DI pipe of 200mm dia RM 300.00 62. Old U/s broken Cl/DI pipe of 150mm die RM 250.00 63. Old U/s broken Cl/DI pipe of 100mm dia - RM 150.00 64. Old U/s broken Cl/DI pipe of 80mm dia RM 100.00 65. Old Cl/DI fitting Kg 30.00 66. Old U/S Pump Shaft any type Each 105.00 67. Old U/s Brushes Each 22.00 68. Old U/s Impeller obtained from submersible pump set Each 100.00 69. Old U/s Impeller centrifugal / Non clog pump set Each 130.00 70. Old U/s thrust plate Each 10.00 71. Old U/s stage casing bowl Each 30.00 72. Old U/s Coupling assy Each 25.00 73. Old U/s thrust bearing housing Each 30.00 74. Old U/s Thrust pads Each 20.00 75. Old unsv tyre coupling Each 20.00 76. Old UNSV Star delta starter 40 HP Each 300.00 77. Old DOL Starter any type 10 HP Each 120.00 78. Run lead joint 80mm dia Each 40.00 79. Run lead joint 100mm dia Each 50.00 80. Run lead joint 150mm dia Each 60.00 81. Run lead joint 200mm dia Each 80.00 82. MS Spindle 100 mm Sluice valve Each 20.00 83. MS Spindle 150 mm Sluice valve Each 25.00 84. MS Spindle 200 mm Sluice valve Each 30.00 85. Submersible cable 16 sqmm 3 Core RM 25.00 86. Submersible cable 10 sqmm 3 Core RM 15.00 87. Old unsv MCCB Each 20.00 88. Old unsv earthing material Each 100.00 89. Scrap of unserviceable brass Kg 150.00 90. Old wooden or PVC or steel chowkhats with shutters n exc 1.5 sqm each incl iron mongery Each 400.00 91. Old skeleton shutters with iron mongery Each 300.00 92. Old Steel window with frame and shutter of any size complete Each 500.00 93. Old steel cupboard with frame and shutter of any size complete Each 250.00 94. Old steel ventilator of any size complete Each 200.00 95. Old curtain rod of any size description RM 5.00 96. U/s Old PVC water tank of capacity exc. 1000 litre 500 but n.exc Each 450.00 97. Old CI pipe 100 mm dia pipe of any description such as Nahani trap Bends TEE etc RM 100.00 98. Old PVC pipe for rain water of 110 mm dia or 75 mm dia of any size or description RM 25.00 99. Old looking mirror of any size/ description Each 10.00 100. Old grating of any size/ description Each 10.00 101. Old PVC connecting pipe of any size description Each 10.00 102. Old PVC pipe Bends pipe of 110 mm dia or 75 mm dia of any size description Each 5.00 103. Old U/S wiring with switches, sockets, ceiling roses, regulators etc Point 25.00 104. Old U/S Bulk Head Fitting Each 10.00 105. Old U/S Fan Regulator Each 5.00 106. Old U/S MCB DB TPN Each 50.00 107. Old U/S DB SPN 8 way Each 25.00 108. Old U/S MCB Each 2.00 109. Old U/S Sub main Wiring RM 10.00 110. Old Switch, socket, regular, regulator lamp holder, call bell etc Point 25.00 111. Old Unsv bldg security light Each 25.00 112. Old PVC doors Intl frame of any size Incl hardware etc 1.0 Sqm and n.exc 2.00 s.q.m Each 300.00 113. Old wooden door Intl MS frame of any size Incl hardware etc 1.0 s.q.m and n.exc 2.00 s.q.m Each 350.00 114. Old iron stone obtained from demolition of RCC work KG 30.00 115. Old red stone obtained from flooring of any description or size or thickness etc sqm 80.00 116. UNSV Old PVC water tank of capacity 200 to 500 litre Each 250.00 117. Old wooden windows of any description/size and hardware etc Each 150.00 118. Old u/s wall and ceiling boards any thickness, inc!uding cover fillets/frame work of any description Sqm 5.00 119. Old AC sheet or roof of any size Sqm 20.00 120. U/s EWC of any pattern Each 20.00 121. Old CI Cowl of any dia or description Each 30.00 122. Old Granite, Kota and marble etc of any size Sqm 30.00 123. Old U/s rolling shutter of any size or description Each 2000.00 124. Old u/s high level CI flushing cistern of any description Each 300.00 125. U/S light fittings tube light 4 feet Each 25.00 126. Old U/S PVC scrap Kg 20.00 127. Old Aluminum Scrap Kg 150.00 128. Old Copper Scrap Kg 380.00

BRR:8434049 Tender For Provision Of Retaining Wall Near Living Dsls At 11 Para Sf Provision Of Fol Shed Near Bldg No P 02 Nkd At 18 Sikh Li And Spl Repair Wks To Bldg No P 03 At Nkd 18 Sikh Li Under Ge 859 Ews.; 1 Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil. 2 Rough excavation n exc.1.5m deep and gatting out in hard/dense soil. Complete all as specified and directed. 3 Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in soft/loose soil complete all as specified and directed 4 Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in soft/loose soil. 5 M&L foe Sand filling under floors or in foundations including watering and consolidation in FOL store complete all as specified and directed 6 Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point. 7 M&L for Hardcore of gauge n exc. 63 mm, with broken stone/ boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed 8 Material and labour for providing cement concrete 1:2:4 type B-1 using 20 mm graded aggregate ) in plinth walls or retaining walls,drain walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) 9 M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate )as in foundation bed concrete complete all as specified and directed 10 M&L for Cement concrete type B-2, 1:2:4 (using 40mm graded agg) as in surface channels and drains complete all as specified and directed. 11 M&L PCC 1:2:4 typeB-1 using 20mm graded stone aggregate as in coping complete all as specified and directed 12 M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed 13 M&L for Precast PCC bonders (for stone walling) type B-1, 1:2:4 (20mm graded stone agg) in CM 1:6 as in bond stone complete all as specified and directed 14 M&L for RCC Nominal Mix type B-1, 1:2:4 (using 20mm graded stone agg) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 15 M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed. 16 M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) as in Columns, pillars, piers, posts and struts complete all as specified and directed 17 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc 18 Supply only of Liquid water proofing compound for exteenal plastering complete all as specified and directed 19 M&L for walling of random rubble uncoursed, well bonded,bedded and solidly hearted built in CM 1:6 complete all as pecified and directed 20 Extra over stone walling for hammer dressing with maximum depression from straight edge held against the dressed surfaceto face beds and joints as specified of random rubble walling uncoursed or brought upto courses complete all specified and directed. 21 Use & Waste of flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. 22 Use & Waste of flatFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed 23 Use & Waste of flat Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed complete all as specified and directed 24 M& L for cleansawn Second class hard-wood scantlings with framed work. 25 Material & labour for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area not exc. 3 sqcm complete all as specified and directed 26 S&F 2nd class Hard woodPlain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. 27 S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats. 28 M&L for 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 29 S& F for 30mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. 30 S&F 30mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, woodparticle board with commercialface veneers: supplied and fitted to chowkats. 31 S&F 150 mm longaluminium anodized, barrel tower bolts extruded section. 32 S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. 33 S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed. 34 Supply and fix MS butt hinges medium weight, cold rolled 125mm size complete all as specified and directed. 35 S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. 36 Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 100 mm long complete all as specified and directed. 37 S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width ofaperture 1.18mm and fixed with tinned tacks, or galvanised wire staples 38 S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. 39 Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. complete all as specified and directed. 40 Ditto, itm no Above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders 41 M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming toIS 1161- 1979 grade St.-240 complete all as specified and directed 42 S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete, all as specified and directed. 43 S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. 44 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 45 S&F offor Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 46 Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls surface etc complete all as specified and directed. 47 Supply and fixed 4 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. 48 M&L for 75mm thick Pcc type C-2, 1:3:6 (using 40mm graded stone agg) as in plinth protection complete all as specified and directed. 49 M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. 50 M&L for PCC 100mm thick, type D-2, 1:4:8 (using 40mm graded stone agg) infloors and pavings etc. complete all as specified and directed 51 M&L for PCC40 mm thick, type B-1, 1:2:4 (using 20mm graded stone agg) infloors and pavings etc. and finishing surfaces even and smooth with out using extra cement complete all as specified and directed 52 M&L for Glass dividing strips, 3 mm thick 38mm wide for constraction and expension jointscomplete all as specified and directed 53 M&L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floorsetcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade . Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. 54 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removingserviceable tiles to store and rubbish off the premises 55 M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified. 56 M&L rendering 10 mm thick in CM 1:6on concrete inner surfaces of wallfinished even and smooth without using extra cement . 57 M&L rendering mixed with liquid wpc by 0.4% of cement weight 15mm thick in CM 1:4on concrete outer surfaces finished even and smooth without using extra cement . 58 M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:6 for laying floor tiles etc all as specified. 59 M&L for keyed pointing to random rubble masonry or brought upto course in cement mortar 1:4 complete all specified and directed. 60 Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified. 61 Material and labour for preparation of old external plastered surfaces of walls and applying two coats of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed. 62 M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over Primimg coat complete all as specified and directed by engr in charge 63 S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. 64 M&L for preparation of new or previously untreated surface ofwooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. 65 M&L for preparation of newly steel surface of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over one coat of red oxide primer. 66 Material and labour for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of snthetic enamel paint over a coat of red oxide primer over 10 cm width or girth on steel surface . 67 S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. 68 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. 69 Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cmin section , in any position all as specified and directed. 70 Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed 71 Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. 72 Use and waste flat form work to vertical faces of drain/retaining wall and similar work . 73 Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed. 74 Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc 1.50 Sqm each including iron mongeries complete all as specified and directed. 75 Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. 76 Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. 77 Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy andfixed etc complete all as specified and directed. 78 Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed. 79 Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. 80 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. 81 M/L for point wiring in casing caping with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl casing caping with its accessories and PVC Boxes for fixing switches/sockets etc for the following:One light/fan point controlled by one No piano type switch5 Amps single pole one way 82 One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board. 83 One socket outlet 5/3 pin 6 AMPS controlled by one switch onindependent board. 84 All as per item No 81 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor. 85 S&F Switch Piano Flush button single pole one way 5/6 Amp. 86 S&F Switch Piano Flush button single pole one way 15/16 Amp. 87 S&F socket outlet 2 in 1,3 pin & 2 pin, 5/6 Amp, 240 volt. 88 S&F socket outlet 2 in 1 ,3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt. 89 S&F ceiling rose surfacebakelite 65mmx50mm 100watt three terminal. 90 S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) typeincluding taking down old Distribution Board and MCBs all as specified and directed . 91 S&F MCB SPN 40 Amps 240 volts C series, 10 KA, 50 Hz.Make:- As approved Make of DB 92 S&F MCB SP 5 to 32 Amps 240 volts C series, 10 KA, 50 Hz including connection in the DB and testing/commissioning.Make:- As approved Make of DB 93 Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete. ® 94 Supply and fixing LED lights fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fitting complete. 95 Supply and fixing LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including taking down old unserviceable light fitting any type complete with IP 65/66 protectionincluding taking down old unserviceable light fitting complete. 96 Supply and laying or fixing or passing through pipeXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 25 sqmm 2 core including taking out old unserviceable cable any type complete all as specified and directed by Engineer in charge. 97 High density polyethylene pipes (HDPE) 50 Sqmm bore of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. 98 Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm diaby means of bolts, nuts, check nuts and washers ofgalvanizediron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC(1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduitgrouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completionincluding taking out old unserviceable eathing complete all as specified and as directed.

BRR:8434048 Tender For Repair To Joinery And Other Misc Work In Zone-I (A) Area Under Age B/R-Iv Of Ge(S) Jaipur At Jaipur Mil Stn; 1 M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 2 M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 3 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as inlintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form workcomplete all as specified and directed. 4 M&L for PrecastReinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. 5 M&L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces after applying anticorrosive paint over cleaned rusted steel surface including demolition old RCC surfaces (chajjas, fins, beams , borders etc andapplying 30mm thick polymer modified mortar in CM 1:3 including mixing of polymer latex additives for repair of Chajjas fins, border etc complete all as specified and directed.Note :- (i)Cleaning of rusted part of steel and applying anticorrosive paint over it.(ii)Qty of ploymer to be used 15% by weight of the cement or as per manufacturer instruction. (iii)Use of electrical mixer to get the homogeneous dough on bond coat surfaces.(iv)To achieve required thickness repeat this step after 24 hrs as required.(v) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed.(vi)Rate shall be inclusive of all necessary scaffolding for building of height upto two storey.Make :-(i) The epoxy bonding agent shall be Krishna / Dr Fixit / MC Bauchemie / M/s Cemistik / Sika or equivalent as approved by GE.(ii) Polymer latex addictive shall be of Sika / Fosroc / Dr Fixit or equivalent as approved by GE. 6 M&L brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 7 M&L brick work using old size bricks with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 8 M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in Brick walls/RCC cutting not exc 10 cm girth complete all as specified and directed. 9 M&L for cutting holes in brick walls exc one brick but not exc two brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. 10 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified & directed. 11 M&L for Neoprene / EPDM (Ethylene Propylene Diene Monomer) rubber gasket complete all as specified and directed. 12 Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. 13 Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. 14 S&F second class hard wood 35 mm thick glazed and skeleton shutters, (having 04 to 06 Nos of panel) open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. 15 S&F35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 16 S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, with both face are covered with decorative face veneer with lipping / frame to match complete all as specified and directed. 17 Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. 18 Taking down shutters of any description exc 1.00 Sqm butnot exc 2.00 Sqm each and refixing in the same opening after repair such as easing and adjusting complete all as specified and directed. 19 Resecuring or easing & adjusting with out taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed. 20 S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed. 21 S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified anddirected 22 M&L for providing and fixing factory-made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 + – 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass Note: (i) Area should not exceed 1.00 sqm each.(ii) The unit rate quoted by contractor includes cost of glass and all other connected accessories. (iii) Net opening will be measured for payment purpose. 23 M&L for factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm) window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges ofzinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Note: (i) Area not exceeding 1.00 sqm each.(ii) The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. (iii) Net opening will be measured for payment purpose. 24 S&Ffactory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.complete as directed For area not exceeding 2.00 sqm each(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) 25 S&Fhandles, stainless steel of 125 mm size, oval shape, fancy type complete all as specified and directed. 26 S&F 5 mm thick pvc panelling in back of cup board , one side prelam fixed with screws to make cup boardsincuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed. 27 S&F in stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast & extruded section, fancy type, of 300 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. 28 S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30 mm size complete all as specified and directed. 29 S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 30 S&F in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed. 31 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 32 S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 33 S&F 100 mm long stainless steel butt hinges fixed with CP finish steel screws as in PVC door complete all as specified anddirected. 34 S&F in repair 25 mm bore dia mild steel coloured PVC laminated curtain rod fancy type with fixing brackets ,stops, rollers etc complete as all specified and directed. 35 M&L for auto close hinges, stainless steel, bright finish or electrogalvanisedfixed complete all as specified and as directed. 36 S&F stainless steel handles, fancy type, of 200 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. 37 S&F stainless steel (SS) tower bolts, fancy type, of size150 mm long complete all as specified and directed.Make : Hafele / Hettich / Ultima or equivalent make as approved by GE. 38 M&L for cupboard magnet, stainless steel, bright finish or electro-galvanised of size 55 x 29mm complete all as specified and directed .Make : Godrej, Hafele,Ultima,Hettich 39 M&L for cupboard lock, stainless steel, bright finish or electro-galvanised of size 64mm complete all as specified and directed . 40 S&F stainless steel, curtain rod holder, fancy type for 25mm dia curtain rod complete as all specified and directed. 41 S&F stainless steel handles, fancy type, of 100 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. 42 S&F stainless steel barrel tower bolts stove enamelled black with bright bolt200 mm long complete all as specified and directed. 43 S&F brass curtain rod bracket / end bracket for holding drapery rod of 25mm dia complete as all specified and directed. 44 S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed. 45 S&F in repair for steel window handles and peg stay etc. including welding if required complete all as specified and as directed. 46 S&F mild steel framed work for windows grills such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors / window and similar work conforming toFe -290 Gde E-165 complete all as specified and directed. 47 M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 48 S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of gradeFe 410-W (Gde E-250) quality B complete all as specified and directed. 49 S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed. 50 S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with out glazing bars, dovetailed or welded complete all as specified and directed. 51 M&L for powder Coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 52 S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Glass and other filling material in panels shall be measured and paid seperately. 53 S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21, 100 mm long (2 No) , suitable handle (1 No) complete all as specified and directed. 54 Taking down existing aluminium window single leaf of area n.exc 1.5 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable,including fixing the shutter on hinges complete all as specified and directed. 55 Taking down existing aluminium door single leaf of area exc 1.5 sqm but n.exc 4.0 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed. 56 M&Lfor taking down steel shutter of any description, area n.exc 1 Sqm each for repairing in any position (building upto three storey)by replacing the projecting type or any typehinges (Single pane) with new box type or pintle hinge including welding and refixing the shutter, making good the surfaces with the existing shutter after applying two coats of synthetic enamel paint over red oxide primer on new hinges or repair work complete all as specified and as directed. 57 S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 58 S&F as in repair of unserviceable 6mm diaround steel bar for Almirah large steel ( upto 2 m long ) as in support of locking device with 5 mm thick MS sheet cover platecomplete all as specified and directed. 59 M&L for suspended false ceiling (Make - ArmstongANF AH 95 or equivalent as approved by GE) of mineral fiber board, size of 600 x 600 x 15 mm ceiling tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Make Armstorng or equivalent make including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /AC sheet of existing ceiling complete all as specified and directed. 60 M&L for machine cut kota stone slab flooring mirror finished 40-50 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete all as specified and directed. 61 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 62 M&L for 75 mm thick Cement concrete 1:3:6type C-2using 40 mm graded stone aggregate as in sub base complete all as specified and directed. 63 M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. 64 M&L for PCC 1:2:4 type B-0 using 12.5 mmgraded stone aggregate as in sub base flooring 25 mm thick surface finished even andrough to receive the topping layer complete all as specified and directed. 65 M&L for glazed ceramic coloured tiles in vertical surface350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. 66 M&L for joint free non skid coloured tiles of design as approved7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. 67 M&L for non skid joint free ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 68 S&F for rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement andpigment complete all as specified and directed. 69 Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed. 70 M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed. 71 M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed 72 Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 73 M&L for rendering 10 mm thick in CM 1:3 as in ceiling surface and finished even and smooth without using extra cement complete all as specified and directed. 74 M&L for rendering 15 mm thick onCM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing wall in two layer , first layer 10 mm thick in CM 1:4 even and fair, and second layer 05 mm thick in CM 1:4 surface finished even and smooth including integral water proofing compound at rate of 03% by weight of cement or as per manufacturer specification complete all as specified and directed. 75 Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement or cement lime mortar not previously plastered; and scrubbing down with water etc. to receive plaster complete all as specified and directed. 76 M&L for preparation of new surface of wall of any description and applying two coats of oil bound distemper (OBD) over and including 2mm thick wall putty complete all as specified and directed. 77 M&L for preparation of new surface of ceiling of any description and applying two coats of oil bound distemper (OBD) over a coat of chalk whiting on plastered surfaces preparatory to distempering over and including 2 mm thick wall putty all as specified and directed. 78 M&L for preparation of new plastered surfaces of wall and applying two cement based paint complete all as specified and directed. 79 M&L for preparation of newly plastered surfaces of walls and applying two coats ofexterior acrylic emulsion paint over a coat of primer including scaffolding upto three storey building complete all as specified and as directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc. 80 S&F 3 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. 81 S&F 4.8 mm thicksheet glass, ordinary quality and glazing with oil putty in squareexceeding 0.5 Sqm in each pane, complete all as specified and directed. 82 S&F 3 mm thicksheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. 83 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete orbrick surrounds, glazed with putty of fixed with beads complete all as specified and directed. 84 M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 85 M&L for preparationof new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 86 S&F in repair kitchen plain basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 87 S&F in repair kitchen perforated cutlery basket of stainless steel size 17 x 20 x 4 of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 88 S&F in repair kitchen plate / thali basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 89 S&F in repair baskets guide channel of stainless steel suitable for running basket of grade SS-304, 50cm long and 30 to 40mm width including drilling over stone complete all as specified and directed. 90 S&F in repair kitchen cutlery & spoon basket (plain) of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 91 Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 92 Demolition of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed. 93 Demolition of cement concrete un-reinforced in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. 94 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 95 Demolition of reinforced cement concrete (RCC) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed. 96 Dismantling of boarding, any description, fixed in any position with nails etc complete all as specified and directed. 97 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 98 Dismantling of AC corrugated / semi corrugated or translucent sheet as in roof coverings complete all as specified and directed.

BRR:8434038 Tender For Repair/Replacement/Refreshment Of Main Power Supply Feeders Pillar,Cope Points And Allied Items Under Centre No 60 Of Naval Dockyard Under Ge (Nw) Kunjali

BRR:8434037 Tender For Misc Repair/Replacement Of Ht Panel Indoor/Outdoor Vcbs, Transformers And Connected Works Under Ge Saugor; 1.00 Disconnecting existing incoming & outgoing connections and inspection, servicing, testing, checking and calibration healthiness of entire HT 36 kV, 1600 Amps, 25 kA VCB outdoor type including cleaning, greasing of all mechanical parts of VCB and checking smooth operation manually and motorised with remote panel of VCB for tripping and closing, checking of CTs, PTs, all internal wiring as per site requirement, calibration of VCB and components and to maintain desired insulation level of each phase for smooth operation and test reports of all panels complete all as specified and as directed including the followings: - (396/3094-HV/04, 396/3095-HV/04,396/3015-HV/05 & 396/3093-HV/06)(a) Cleaning of Vacuum Circuit Breaker with CRC-226.(b) To check the condition of SIC contacts.(c) Checking condition and alignment of jaw contact.(d) Checking and proper tightening of hardware.(e) Checking of proper closing/ open of all poles.(f) Checking of breaker tripping through push button.(g) Checking and adjusting gap between hylem sheet and side plate.(h) Checking motor operation in case of EDO.(i) Checking auxiliary contacts continuity proper change over.(j) Checking of presence if circlips.(k) Checking IR between phase to phase (VCB closed condition).(l) Checking IR between phase to earth (VCB closed condition).(m) Checking IR between phase to earth (VCB open condition).(n) Cleaning and providing lubricants on movable mechanical parts.(o) Testing of relays through secondary injections.(p) Tripping of VCB through Buchholz relay/ OTI/WTI if required.(q) Testing of CTs and PT.(s) Testing of contact resistance of VCBsNote: -(i) Spare parts excluding wiring shall be measured & paid separately (ii) Servicing shall be carried out by authorised rep of VCB manufacturer. 2.00 M&L for repairs to motor charging mechanism by opening of 36KV, upto 1600A, 25 KA circuit breaker by authorised Engineer B45 3.00 S&F in repalcement of tripping and closing coil for 36 KV VCB outdoor type as per existing complete all as specfied and directed. 4.00 S&F in replacement of limit switch for VCB as per existing complete all as specified and directed. 5.00 Inspection, servicing, testing, checking and calibration of remote panel for HT 36 kV VCB, outdoor type including cleaning, checking internal wiring, tripping operation of earth fault and over current relays, transformer protection relays complete for smooth operation of panel by injecting artificial HT supply for checking tripping on earth fault and over current complete all as specified and as directed. (As mentioned in ser No. 1) 6.00 Inspection, servicing, testing, checking and calibration of 11 kV VCB (SF6 breaker) panel consisting of two incoming and three outgoing including bus-coupler (total VCB 06 Nos) for servicing, cleaning, tightening of loose mechanical mechanism, greasing inspection of busbar, CTs/PTs, internal wiring of control panel, indicators, measuring of IR value, calibration of IDMT relays, replacement of unserviceable spare parts, testing of tripping system, to maintain desired insulation level of each panel and removing all type of dust and settled dirt by mechanical means including testing complete all as specified and as directed including the followings: - (MRS Koregaon)(a) Cleaning of Vacuum Circuit Breaker with CRC-226.(b) To check the condition of SIC contacts.(c) Checking condition and alignment of jaw contact.(d) Checking and proper tightening of hardware.(e) Checking of proper closing/ open of all poles.(f) Checking of breaker tripping through push button.(g) Checking and adjusting gap between hylem sheet and side plate.(h) Checking motor operation in case of EDO.(i) Checking auxiliary contacts continuity proper change over.(j) Checking of presence if circlips.(k) Checking IR between phase to phase (VCB closed condition).(l) Checking IR between phase to earth (VCB closed condition).(m) Checking IR between phase to earth (VCB open condition).(n) Cleaning and providing lubricants on movable mechanical parts.(o) Testing of relays through secondary injections.(p) Tripping of VCB through Buchholz relay/ OTI/WTI if required.(q) Testing of CTs and PT.(s) Testing of contact resistance of VCBsNote: -(i) Spare parts excluding wiring shall be measured & paid separately (ii) Servicing shall be carried out by authorised rep of VCB manufacturer. 7.00 M&L for repairs to motor charging mechanism by opening of HT 11 KV SF-6 circuit breaker trolly by authorised Engineer complete all as specified and directed. 8.00 M&L for repairs to trip and closing spring mechanism by opening of HT 11 KV SF-6 circuit breaker trolly by authorised Engineer complete all as specified and directed. 9.00 Supply only in repair of tripping & closing coil suitable for HT 11KV VCB as per existing complete all as specified and directed. 10.00 Supply only in repair master trip relay for earth fault & over current suitable for HT 11 KV VCB panel complete all as specified and directed. 11.00 Supply only in repair three phase overcurrent & earth fault relay for HT 11KV VCB panel complete all as specified and directed. 12.00 Supply only in neon indicator LED lamp for indicating RYB in HT 11 KV VCB panel complete all as specified and directed. 13.00 Supply only in repair digital ampere meter 0-100 Amps on HT 11KV VCB panel suitable for existing CT ratio complete all as specified and directed. 14.00 Supply only in repair trip, close and neutral rotary switch complete all as specified and directed. 15.00 S&F in repalcement of current transformer 150/5+5 Amps 11 KV indoor type fixed inside the HT panel as per existing complete all as specfied and directed. 16.00 Inspection, servicing, testing, checking and calibration of 11 KV VCB panel consisting of one incoming and one outgoing (total VCB 02 Nos) for servicing, cleaning, tightening of loose mechanical mechanism, greasing inspection of busbar, CTs/PTs, internal wiring of control panel, indicators, measuring of IR value, calibration of relays, replacement of unserviceable spare parts, testing of tripping system, to maintain desired insulation level of each panel and removing all type of dust and settled dirt by mechanical means including testing complete all as specified and as directed including the followings: - (MRS Koregaon)(a) Cleaning of Vacuum Circuit Breaker with CRC-226.(b) To check the condition of SIC contacts.(c) Checking condition and alignment of jaw contact.(d) Checking and proper tightening of hardware.(e) Checking of proper closing/ open of all poles.(f) Checking of breaker tripping through push button.(g) Checking and adjusting gap between hylem sheet and side plate.(h) Checking motor operation in case of EDO.(i) Checking auxiliary contacts continuity proper change over.(j) Checking of presence if circlips.(k) Checking IR between phase to phase (VCB closed condition).(l) Checking IR between phase to earth (VCB closed condition).(m) Checking IR between phase to earth (VCB open condition).(n) Cleaning and providing lubricants on movable mechanical parts.(o) Testing of relays through secondary injections.(p) Tripping of VCB through Buchholz relay/ OTI/WTI if required.(q) Testing of CTs and PT.(s) Testing of contact resistance of VCBsNote: -(i) Spare parts excluding wiring shall be measured & paid separately (ii) Servicing shall be carried out by authorised rep of VCB manufacturer. 17.00 M&L for replacement of HT spouts for contacts of HT 11 KV VCB including cleaning of all contact parts connecting and testing complete sytem with the control wiring for healthyness of all internal wiring complete by authorised Engineer complete all as specified and directed. 18.00 S&F in replacement of current transformer 150-75/5 Amps 11 KV indoor type fixed inside the HT panel as per existing complete all as specfied and directed. 19.00 Supply only HRC fuse 6 to 10 Amps suitable for VCB panel as per existing complete all as specified and directed. 20.00 Inspection, servicing, testing, checking and calibration of 11 KV VCB panel consisting of one incoming and four outgoing (total VCB 05 Nos) for servicing, cleaning, tightening of loose mechanical mechanism, greasing inspection of busbar, CTs/PTs, internal wiring of control panel, indicators, measuring of IR value, calibration of relays, replacement of unserviceable spare parts, testing of tripping system, to maintain desired insulation level of each panel and removing all type of dust and settled dirt by mechanical means including testing complete all as specified and as directed including the followings: -(a) Cleaning of Vacuum Circuit Breaker with CRC-226.(b) To check the condition of SIC contacts.(c) Checking condition and alignment of jaw contact.(d) Checking and proper tightening of hardware.(e) Checking of proper closing/ open of all poles.(f) Checking of breaker tripping through push button.(g) Checking and adjusting gap between hylem sheet and side plate.(h) Checking motor operation in case of EDO.(i) Checking auxiliary contacts continuity proper change over.(j) Checking of presence if circlips.(k) Checking IR between phase to phase (VCB closed condition).(l) Checking IR between phase to earth (VCB closed condition).(m) Checking IR between phase to earth (VCB open condition).(n) Cleaning and providing lubricants on movable mechanical parts.(o) Testing of relays through secondary injections.(p) Tripping of VCB through Buchholz relay/ OTI/WTI if required.(q) Testing of CTs and PT.(s) Testing of contact resistance of VCBsNote: -(i) Spare parts excluding wiring shall be measured & paid separately (ii) Servicing shall be carried out by authorised rep of VCB manufacturer. 21.00 S&F in replacement of vaccum interuptor suitable for 11 KV VCB as per existing complete all as specified and directed. 22.00 S&F in replacement of rear spouts suitable for 11 KV VCB as per existing complete all as specified and directed 23.00 S&F in replacement of drive insulator suitable for 11 KV VCB as per existing complete all as specified and directed 24.00 S&F in replacement of busbar support spouts suitable for 11 KV VCB as per existing complete all as specified and directed 25.00 S&F in replacement of busbar sleeve 11 KV as per existing complete all as specified and directed 26.00 S&F in replacement of busbar support insulators suitable for 11 KV VCB as per existing complete all as specified and directed 27.00 Supply only Current transformer for 11 KV VCB of current ratio100/50-5+5A complete all as specified and directed. 28.00 Supply only Potential transformer (PT) for 11 KV existing VCB compete all as specfied and directed. 29.00 S&f in replacement of auxillary switch suitable for VCB as per existing complete all as specified and directed 30.00 S&F in replacement of HT 11 KV tape complete all as specified and directed 31.00 S&F in replacement of HT 11 KV aluminium insulated covered conductor single core of size 35 sqmm complete all as specified and directed 32.00 M&L for battery of capacity 2 volts 100 AH maintenance free suitable for VCB DC supply connected to existing HT panel complete all as specified and directed. 33.00 Periodical testing, calibration of 33 KV power transformer (all tests shall be carried out as per periodical test form of 33 KV transformer) complete all as specified and directed. Note:- Testing, servicing shall be carried out by authorised rep of manufacturer or State electricity bd 34.00 Painting of transformer with two coats of synthetic gray paint after preparation of old painted surfaces over a coat of red oxide at site off size 50-75 KVA including writing of MES and SM No complete all as specified and directed. 35.00 Painting of transformer with two coats of synthetic gray paint after preparation of old painted surfaces over a coat of red oxide at site of size 100 to 200 KVA including writing of MES and SM No complete all as specified and directed. 36.00 Painting of transformer with two coats of synthetic gray paint after preparation of old painted surfaces over a coat of red oxide at site of size 250 to 400 KVA including writing of MES and SM No complete all as specified and directed. 37.00 Painting of Power transformer with two coats of synthetic gray paint after preparation of old painted surfaces over a coat of red oxide at site of size 0.5 to 1.6 MVA including writing of MES and SM No complete all as specified and directed. 38.00 Shifting the unserviceable step down power transformer from the site upto any height including opening of mounting and nut bolt and taking down from plingth and pole, draining out the old oil, transporting the transformers to work shop/ factory for repairs & transporting the same back after repairs at the location as directed by Engineer-in-Charge, connecting up, making all cable connections, earth connections etc and testing complete of any capacity complete all as specified and directed. 39.00 Shifting the unserviceable step down distribution transformer from the site upto any height including opening of mounting and nut bolt and taking down from plingth and pole, draining out the old oil, transporting the transformers to work shop/ factory for repairs & transporting the same back after repairs at the location as directed by Engineer-in-Charge, connecting up, making all cable connections, earth connections etc and testing complete of any capacity complete all as specified and directed. 40.00 Shifting the serviceable step down distribution transformer from MES yard/site upto any height including fixing, mounting, with nut bolt complete on plinth/pole, transporting the transformer from MES yard to site & transporting the same back to yard after fixing the repaired transformer complete all as directed by Engineer-in-Charge, connecting up, making all cable connections, earth connections etc and testing complete of any capacity complete all as specified and directed. 41.00 Opening of Top cover of distribution/Power transformer for inspection of worn out parts/tap changers and reassembling after repair / replacement of worn out parts complete all as specified and directed. Note : parts required for replacement shall be measured and paid separately under respective items. 42.00 Disconnecting HV / LV connection of transformer and re-connection on same position after repair complete all as specified and directed. 43.00 Taking out core assembly of transformer for repair / rewinding of LV / HV coil including reassembling after repair and testing on load for satisfactory performance of transformer complete all as specified and directed. 44.00 M&L for rewinding of HV/LV coil with copper conductor including insulation material in replacement complete all as specified and directed 45.00 M&L for re-insulating existing LV coil made out of copper conductor including insulation material complete all as specified and directed 46.00 M&L for rewinding of HV/LV coil with aluminium conductor including insulation material in replacement complete all as specified and directed 47.00 M&L for re-insulating existing LV coil made out of aluminium conductor including insulation material complete all as specified and directed 48.00 M&L for replacement of top cover gasket made out of leatherised celbatec sheet 4mm thick including leak proofing by shalak solution and dovetail jointing on the end side of any capacity upto any height including opening of mounting and nut bolt and taking down from plingth and pole , of any height as per site requirment complete all as specified and directed. 49.00 S&F for replacement of temp gauge 0 - 100 degree C suitable for existing fitment of transformer 33 and 11/0.433KVA complete all as specified and directed. 50.00 M&L for replacement of porcelain transformer bushing 12 KV/250 Amps complete with high voltage brass metal parts as per IS-3347 complete all as specified and directed. 51.00 M&L for replacement of LV brass metal spindle with insulating part complete with porcelain bushing 1.1 KV/250 Amps complete all as specified and directed. 52.00 S&F for replacement of silica gel breather complete set weight 500 gms for distribution transformer of any capacity complete all as specfied and directed. 53.00 S&F for replacement of silica gel breather complete set of weight 1000 grams for power transformer of any capacity complete all as specified and directed. 54.00 M&L for repalcement of only silica gel in existing breather of any size fixed in different capacities of transformer complete all as specified and directed. 55.00 S&F for replacement of oil level gauge complete suitable for distribution transformer of any capacity complete all as specified and directed. 56.00 Supply in top up / replacement of transformer oil having dielectric strength of 60 KV as per IS complete all as specified and directed. 57.00 Dismantling and taking down of End termination/ Straight through cable joint of any size,any type complete all as specified and directed. 58.00 Supply, jointing and testing in repair cable jointing kit for 11KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 - 95 Sqmm all as per manufacturer’s recommendations complete all as specified and directed. 59.00 Supply, jointing and testing in repair cable jointing kit for 11KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 - 185 Sqmm all as per manufacturer’s recommendations complete all as specified and directed. 60.00 Supply, jointing and testing in repair cable jointing kit for 11KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 - 185 Sqmm all as per manufacturer’s recommendations complete all as specified and directed. 61.00 Supply, jointing and testing in repair cable jointing kit for 11KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 - 95 Sqmm all as per manufacturer’s recommendations complete all as specified and directed. 62.00 Supply, jointing and testing in repair cable jointing kit for 11KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 - 185 Sqmm all as per manufacturer’s recommendations complete all as specified and directed. 63.00 Dismantling air break gang operated switches vertical/horizontal mounted and fuse unit including insulators and operating mechanism for repair/ replacement of broken/worn out components and insulators etc. complete all as specified and directed. 64.00 S & F gang operated air break switch, three poles, outdoor type, nominal system voltage 33 KV, rated voltage 36 KV, rated normal current 200 Amps, rated frequency 50 Hz, rated one minute power frequency withstand voltage between (i) earth & poles 70 KV (rms) (ii) across the isolating distance 80 KV (rms), rated lightning impulse withstand voltage (i) to earth and between poles 170 KV (Peak) (ii) across the isolating distance 195 KV (Peak), Rated short-time withstand current 20 KA for 3 seconds, rated peak withstand current 50 KA for climatic conditions at the site, mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current complete all as specified and as directed. 65.00 S & F drop out fuse unit expulsion type for outdoor air break gang operated switches single pole mounted and including insulator for 36 KV working pressure fixed to and including MS channel with nuts, bolts, washers etc. synthetic bounded fuse carrying tube complete with line taps and suitable for current carryout capacity upto 30 Amps complete all as specified and directed. 66.00 S & F gang operated air break switch with DO fuse assembly, three poles, outdoor type, nominal system voltage 11 KV, rated voltage 12 KV, rated normal current 200 Amps, rated frequency 50 Hz, rated one minute power frequency withstand voltage between (i) earth & poles 28 KV (rms) (ii) across the isolating distance 32 KV (rms), rated lightning impulse withstand voltage (i) to earth and between poles 75 KV (Peak) (ii) across the isolating distance 85 KV (Peak), Rated short-time withstand current 25 KA for 3 seconds, rated peak withstand current 63 KA for climatic conditions at the site, mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current complete all as specified and as directed. 67.00 S & F drop out fuse unit expulsion type for outdoor air break gang operated switches single pole mounted and including insulator for 11 kV working pressure fixed to and including MS channel with nuts, bolts, washers etc. synthetic bounded fuse carrying tube complete with line taps and suitable for current carryout capacity 15 Amps complete all as specified and directed. 68.00 Supply and erection three piece metal oxide lightning arrestor suitable for 11 KV continuous operating voltage (3 phase) with rated voltage 12 KV (rms) with nominal discharge current rating of 10 KA and complete with galvanised clamping arrangements, GI bolts, nuts, washers etc. complete as specified and as directed. 69.00 Dismantling of insulators any type any size complete all as specified and directed. 70.00 Supply and fixing, polymer composite pin type insulator for 11 KV, complete with necessary items with nuts, bolts, washers etc. complete confirming to IS/IEC standards complete all as specified and directed. 71.00 Supply and fixing polymer composite post type insulators for 11 KV, complete with necessary items with with nuts, bolts, washers etc. complete conforming to the latest IS/IEC standards complete all as specified and directed. 72.00 Supply and fixing polymer composite disc type insulator for 11KV, complete with necessary items with nuts, bolts, washers etc. complete confirming to IS/IEC standards complete all as specified and directed. 73.00 Servicing and maintenance of Air Break switch (Gang operating Device) both verticall and horizontal type of capacity 33KV and 11KV triple pole mechanically operated on insulator and steel frame by greasing, checking serviceability and replacement of heavy duty brass Jaw and Blade set, copper strip set, lugs nutbolts, Jumpers all set of three complete all as specified and directed. 74.00 Supply and fixing in replacement of cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed. 75.00 Dismantling of ACSR conductors, earth wire or copper conductor, service feeder or distributor span complete all as specified and directed. 76.00 M&L aluminium conductors Galvanised steel reinforced (ACSR conforming to IS : 398) Part-II)-1976 for HT overhead lines on steel poles / PCC Poles including copper binding wire and suitable size of GI Clamps complete all as specified. 77.00 Material and labour for GI wire 4mm dia (8 SWG) stretching and fixing on pole for continuous earth conductor, Guard wire 3.2 mm (10SWG) for cradle (Hexagonal/rectangular) including binding wire complete all as specified and directed. 78.00 Dismantling stay assembly complete all as specified and directed. 79.00 Supply and fixing stay assembly complete with accessories shown in electrical plate No 1 with stay rod of 16 mm dia including loop insulator suitable for 1.1 KV (size 65x90 mm) with clearance of hole 16 mm and MS stay plate size 230 x 230 x 6mm, stay clamps etc complete all as specified and directed. 80.00 M&L for galvanised stay strand 7/3.15 mm or 7/4.00 mm size with minimum tensile strength of 700 N/ Sqmm and conforming to IS : 2141-1979 complete all as specified & directed. 81.00 Dismantling concrete poles/ struts, any size and transporting to store and stacking complete all as specified and directed. 82.00 M & L for steel tubular swaged pole 410 SP-55 (11.0 metre long) including CI base plate, finial taper plug, bolts, nuts & screws as per IS 2713 Part -I & II including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer on exposed portion and making strips of width 30 cm upto 1.5 m from the ground level in black and white shade in alternate layer including numbering of poles using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and two coats of anticorrosive paint over a coat of red oxide primer to embedded portion of pole including making good to match existing area complete all as specified and as directed. 83.00 M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundation of PCC poles/ struts, etc. including form work complete all as specified and directed 84.00 M & L for plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of stay assy/ pole etc, including form work complete all as specified and directed 85.00 M & L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate for coping/plinth of poles, including necessary form work finished even & smooth without using extra cement complete all as specified and directed. 86.00 Excavation in trenches in hard /dense soil not exceeding1.5 meter wide and not exceeding 1.5metre wide and not exceeding 1.5metre in depth and getting out complete all as specified and directed. 87.00 Excavation in trenches n.exc 1.5m wide and exc 1.5m and n exc 3.0 m depth in any type of soil complete all as specified and directed. 88.00 Removing excavated materials (soil) not exceeding 50metre and depositing where directed at a level not exceeding 1.5 meter above starting point complete all as specified and directed. 89.00 Returning filling in with excavated soil, including spreading, levelling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. 90.00 S&F in ground PCC cable route indicator duly engraved with words HT Cable and arrow indicating direction of laying of cable, complete all as specified and directed.Note. PCC cable route indicator shall be provided at specified distance along the HT cable at all cable joint and turning etc. 91.00 S&F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour with voltage 33000V/11000V as indicated and fixed with M.S. clamps, bolts and nuts of approved size, for HT size 25x20 cm complete all as specified and directed. 92.00 Cutting /trimming of tree branches upto 80 mm thickness along LT/HT OH electric lines which are growing /touching or falling on ACSR conductor / poles or near by sub stns etc at any height from GL and making sufficient clearance (1.5m) from ACSR CONDUCTOR/POLES/STRUCTURE and taking down the same on the ground carefully avoiding the damage and removing to a distance complete all as specified and directed.

BRR:8434026 Special Repair Of Bldg No T309 Of B Det Ex 505 Asc Bn Special Repair To Bldg No Twg 336 Twg337 Of 384 Coy Asc Type B And Special Repair Of Bldg No Twg 264 Of 214 Nsc Under Ge 859 Ews Tawang; 1 Old chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (with shutters & builders hardware fittings of any description) Each 8.00 400.00 3200.00 2 Old chowkhats or frames n.exc 1.5Sqm each (with shutters & builders hardware fittings of any description) Each 10.00 250.00 2500.00 3 Old unservicable plain or corrugated mild steel sheeting of any thickness Sqm 803.00 100.00 80300.00 4 Old unservicable wall and ceiilng baords / insulation boards/ plywood any thickness incl cover fillets with nails or without nails etc complete . Sqm 360.00 15.00 5400.00 5 Old unserviceable timber scantling, frmae work, chowkat Cum 2.46 1500.00 3690.00 8 Old unsv stone slabs any thickness /type Sqm 144.00 50.00 7200.00 9 Old unsv wooden fillets, rail, post purlin etc of any description. RM 268.00 7 1876.00 10 Old U/s materials obtained from point wiring of any size Each 130.00 15.00 1950.00 11 Old Unsv switch, socket ,ceiling rose, bell push, call bell Each 60.00 1.00 60.00 12 U/s old MCB DB/sheet metal enclouser of any type capacity Each 5.00 15.00 75.00 13 U/s old MCBs of any capacity Nos 56.00 1.00 56.00 14 Old Unsv tube/ security light Nos 45.00 15.00 675.00 15 Old U/s earthing Nos 5.00 100.00 500.00 16 Old unsv cable RM 190.00 15.00 2850.00 17 Old unsv Light fittings Nos 10 50 500.00

BRR:8433956 Bids Are invited for Handheld Walkie Talkie - Walkie-Talkie Handset Programmed To Station Configuration, Inclusive Of Battery, Antenna, Belt Clip,Rapid Charger. , Batteries For Handheld Walkie Talkies - Walkie Talkie Handset Battery As Spare. , Helical Antenna For Handheld Walkie Talkies - Walkie Talkie Handset Helical Antenna As Spare. , Walkie Talkie Base Station - Walkie Talkie Base Station (Desktop Type) Programmed To The Station Configuration, Along With 6 Dbi Omnidirectional Antenna With 5 Feet Height Mast With Clamps, Bcps, Mic, And Suitable Mating Connector For Recording Purpose. , Vehicle Mountable Walkie Talkie Base Station - Walkie Talkie Base Station (Vehicle Mountable Type) Programmed To The Station Configuration, Along With 3 Dbi Omnidirectional Vehicle Mount Whip Antenna, Dc Cable With Suitable End Connectors, Rf Cable Of 3-Meter Length With Suitable End Connectors, Mic, And Suitable Mating Connector For Recording Purpose. , Hands Free Kit For Handheld Walkie Talkie - Hands Free Kits For Walkie Talkie Sets Compatible With S.No. 1 , Rf Cable With Connectors Forbase Station Rg213 - 40 Mtr - Rf Cable (Rg213) Of 40 Mtr Length Along With End Connectors, And Suitable Inline Rf Spd For Base Station. , Rf Cable With Connectors For Base Station Rg213 - 60Mtr - Rf Cable (Rg213) Of 60 Mtr Length Along With End Connectors, And Suitable Inline Rf Spd For Base Station. , Programming Cable Software Kit - One Programming Cable/ Software Kit For Base Station And One Programming Cable/ Software Kit For Hand Held Set. , Sitcalong With Accessories - Supply, Installation, Programming And Testing Charges Along With Necessary Accessories Total Quantity : 109

BRR:8433955 Bids Are invited for Power Weeder - Engine Power 5 Point 7 To 6 Kw Engine Model Kohlar Details See In Annexure , Middle Cut Finger Cutter Blade For Grass Cutting - Attachment 1 , Towed Trailer - Attachment 2 , Water Pump With Spraying Attachment - Attachment 3 , Lawn Mower - Attachment 4 , Plough - Attachment 5 , Pto Extension - Attachment 6 , Cultivator - Attachment 7 , Seed Cum Fertilizer Drill - Attachment 8 , Rotary Hoe - Attachment 9 , Reaper - Attachment 10 , Ridger - Attachment 11 Total Quantity : 12

BRR:8433935 Bids Are Invited For Supply Of Part No. 94.111. 360.99 Complete Mechanical Lubricator Assembly With 6 Feed Points For Kg4h , Supply Of Part No. Part No. 94.111. 337.00 Air Cooled Intercooler & Aftercooler Assembly Of Eccs Comp , Piston Ring Compressor Reciprocating Air Compressors - Electric Motor Driven Total Quantity : 2

BRR:8433931 Bids Are invited for Pa Central Exchange For Bdt Area , Master Call Station 48 Key For Bdt Area , Master Call Station 16 Key For Bdt Area , Cable Pa System 5 Pair , 6 Core Single Mode Fo Cable Armoured , Cat-6 Lan Cable For Master Call Station , Pa System Cable50 Pair09mm Atc Cond , Sitc Of Pa System Total Quantity : 24007

BRR:8433817 Bids Are Invited For Internet Bandwidth And Replication Service - Leased Line( Point To Point); Goverment Service Provider; Class A; National Long Distance (Nld); 2

BRR:8433750 Bids Are invited for Adult Cuff - Attached , Adult Nibp Airtube 3 Meter - Attached , Latex Free Nibp Cuff For Infant - Attached , Adult Skin Temperature Probe 21078A - Attached , Snap Lock For Intellivue Monitor - Attached , Multifunction Electrode Pad To Use With Heartstart Xl Defibrillator - Attached , Multifunction Electrode Pads - Attached , Battery For Intrepid Defibrillator Intrepid - Attached , Battery Pack 14 Point 8V 5Ah 74 Wh For Dfm 100 Defibrillator - Attached , Battery Pack For Philips Heartstart Xl Defibrillator - Attached , Ecg Recording Thermal Paper Having 300Mm Length And 210 Mm Width - Attached Total Quantity : 1401

BRR:8433634 Bids Are Invited For Calibration Services - Calibration Of Metic Tpgs M1 To M40 And Unified Tpgs Upto 1 5/16 - 32 Quantity 600 Numbers; As Per Scope Of Work; As Per Scope Of Work; As Per Scope Of Work , Calibration Services - Calibration Of Metic Trgs M4 To M40 And Unified Trgs Upto 1 5/16 - 32 Quantity 100 Numbers; As Per Scope Of Work; As Per Scope Of Work; As Per Scope Of Work , Calibration Services - Calibration Of Plunger Dial Least Count 0 Point 001Mm Quantity 2 Numbers; As Per Scope Of Work; As Per Scope Of Work; As Per Scope Of Work , Calibration Services - Calibration Of Plunger Dial Least Count 0 Point 01Mm Quantity 3 Numbers; As Per Scope Of Work; As Per Scope Of Work; As Per Scope Of Work , Calibration Services - Calibration Of Lt Dial Least Count 0 Point 01Mm Quantity 15 Numbers; As Per Scope Of Work; As Per Scope Of Work; As Per Scope Of Work , Calibration Services - Calibration Of Lt Dial Least Count 0 Point 002Mm Quantity 5 Numbers; As Per Scope Of Work; As Per Scope Of Work; As Per Scope Of Work

BRR:8433502 Bids Are Invited For Explosion Proof Voip Phones , Flameproof Manual Call Point-Is:2148 Add On Phones / Consols / Endpoint For Pabx System Speakerphone Total Quantity : 13

BRR:8433499 Bids Are Invited For Tab Common Cold , Tab Dexamethasone 4Mg , Tab Pheniramine Maleate 25 Mg , Tab Albendazole 400Mg , Oint Betamethasone Plus Gentamycine , Tab Rantidine 150Mg , Cap Antispasmodic , Husk Isabgol 100Gm , Eye Drop Norfloxacin , Eye Drop Nasaldecongestant , Syp Benadryl 100Ml , Bandage Crepe 10Cm , Cap Amoxycillin 250Mg , Tab Ofloxacin 400 Mg , Cotton Wool Absorbent 50 Gm , Tab Cough Lozenges , Tab Levofloxacin 500 Mg , Syr Amoxycillin , Syr Cefexime 30Ml , Tab Neurobion Forte , Tab Digene , Tab Ibuprofen 400Mg , Syp Ibuprofen 30Ml , Tab Cetrizine 10Mg , Tab Fexofenadine 120Mg , Tab Norfloxacin Plus Tinidazole , Tab Folic Acid 5 Mg , Cap Haematinic , Antiseptic Mouth Wash , Oint Clotrimazole 10 Gm , Syr Domperidone , Syr Cough Linctus 100 Ml , Cap Amoxycillin Plus Clavulanic Acid Potassium 625 Mg , Lotion Providone Iodine 100 Ml , Bandage Lwe 6 10 Cm Pkt Of 10 , Dressing Medicated , Syr Alkasol , Syr Ondansetron , Tab Soluble Asprin , Syr Albendazole 10Ml , Syr Iron For Adult 200Ml , Desensitizing Paste 50Gm , Lotion Calamine 100Ml , Oint Miconazole Nitrate , Oint Soframycin 20Gm , Cap Omeprazole 20Mg , Pulv Ors , Drops Ciprofloxacin Plus Dexamethasone , Tab Norfloxacin 400 Mg , Syr Cyproheptadine , Volini Spray , Tab Paracetamol 500Mg , Tab Diclofenac Sodium 50 Mg , Syr Paracetamol 60 Ml , Syp Combiflam , Cap Fluconazole 150 Mg , Tab Ferrous Sulphate , Tab Amlodipine 5 Mg , Tab Atenolol 50 Mg , Oint Povidone Lodine 20 Gm , Oint Salicylic Acid Plus Betamethasone , Tab Vitamin B Complex , Gel Antacid Bott Of 100Ml , Tab Domperidone 10 Mg , Tab Betahistamin 8 Mg , Waxole Ear Drops , Syr Cetrizine , Drops Multivitamin , Oint Diclofenac Sodium , Tab Cefexime 100 Mg , Syp Lactulose , Tab Liv 52 , Inj Voveran , Clotrimazole Powder , Tab Chloroquine Phosphate 250Mg , Tab Pantocid D , Tab Pregabalin 75 Mg , Syp Liv 52 Vet 1000 Ml , Syp Albendazole 100 Ml , Pdr Livol Pdr Liv 52 100 Gm , Pdr Hb Strong Sachet 10 Gm , Oral Suspesion Miloxicam , Pdr Neblon 100 Gm , Supplement 1 Kg , Pdr Min Mixture 1 Kg , Ivermectin Oral Solution , Oxytetracycline Oral Solution , Syp Multivitamin , Ondansetron Oral Veterinary , Calcium Supplement Liquid 1000 Ml , Ciplox Plus Dexa Eye Drop , Hand Sanitizer Small Size , Empty Btl 100 Ml , Diarrhoea Oral Suspension , Anti Tick Shampoo , Animal Feed Supplement Electrolytes And Vitamins Ors , Empty Plastic Bags 100 Ml , Flex Banner 10 Fit By 5 Fit , Seating Arrangements , Refreshment Samosa Tea Biscuits And Drinking Water , Hiring Of Pa System , Sanitation And Hygiene Arrangement Sanitizer Mask And Gloves , Memento To Doctors For Medical Camp , Memento To Doctors For Veterinary Camp Total Quantity : 10847

BRR:8433480 Bids Are Invited For Rkpl Erdmp Re-Certification , Rbhpl Erdmp Re-Certification , Digital Vhf Repeater Set As Per Mha Qr Total Quantity : 2

BRR:8433471 Bids Are invited for Multipurpose Screw Driver Set Bracket Start 9 Pcs Bracket Close , Valve Die For Vehicle Tyres , Tyre Pressure Gauge Bracket Start Tc 2 Point 5 Comma 200Psi Bracket Close , Oil Filter Chain Wrench Spanner , Oil Filter Wrench Heavy Duty Bracket Start Adjustable Type Bracket Close , Allen Key Set Of 12 Pcs Bracket Start Light Duty Bracket Close Size 2Mm To 14Mm , Light Duty Socket Set With Screw Driver Kit Bracket Start 46 In 1 Pcs Tool Kit And Screw Driver And Socket Set Multipurpose Bracket Close , Welding Helmet Auto Darkening , Plier Nose 9 Inch , Combination Plier 8 Inch , Golden Star Brass Bracket Start For Star Plate Bracket Close , Silver Star Bracket Start For Star Plate Bracket Close , Welding Holder 600 Amp , Electrician Tool Kit Bracket Start Nos Of 16 Pcs Items Bracket Close , Line Tester 9 Inch , Digital Bty Cell Tester 12V , Hydrometer Bracket Start 0 - 750 Bracket Close Total Quantity : 76

BRR:8433259 Bids Are invited for Title-1 - 7037 Cl Cinelifter 3 Blade Propeller Polycarbonate Black , Title-2 - 7.5X3x3 Light Grey 2Cw2 Ccw Poly Carbonate , Title-3 - Mark 4 7 Inch 295Mm Carbon Fiber Frame Kit , Title-4 - V4 Stack F405 V4 Fc+55A65a75a 32 Bit 4 In 1 Esc 30X30mm , Title-5 - Micoair M10g 5883 M10 Gps , Title-6 - 1/3 Inch Micro Fpv Camera , Title-7 - Fpv Goggles With Dvr Function , Title-8 - Inr18650-M35a 3.6V 3500Mah Lithium-Ion Battery , Title-9 - Pocket Radio -Cc2500/Elrs-Elrs, Charcoal , Title-10 - 2810 Brushless Fpv Motor 1180Kv , Title-11 - 900/2400 Dual Band 100Mw Gemini Rx 2.4Ghz 915M Elrs Receiver , Title-12 - 22.2 V 5000Mah 6S Li-Ion Battery Pack-Xt60 Connector , Title-13 - Triple Feed Patch 5.8Ghz Antenna Rp-Sma , Title-14 - V2 5.8 Ghz 150Mm Antenna Sma, Rhcp , Title-15 - 2207 3-6S 1700Kv 1900Kv 24 Kv Brushless Motor-1900Kv , Title-16 - Dual -Antenna Tx Head High Frequency 900/2400Mhx Dual Frequency Switch , Title-17 - Fpv Analog Video Transmitter 3W , Title-18 - Boost F7 Fpv Stack , Title-19 - Rs Receiver , Title-20 - Nvc 1/1.8 Inch Freestyle Micro Fpv Camera , Title-21 - Moonlight Kit Moonlight Kit , Title-22 - Avatar Gt Kit , Title-23 - 180 5883 Compass Gps Total Quantity : 283

BRR:8433234 Bids Are Invited For Handling And Transport On Lumpsum Basis - Handling And Transport Service At Belsonda Rake Point

BRR:8433173 Bids Are Invited For Cross Trainer , Cross Fit Rope , Treadmil , Rowing Machine , Cardio Stair Climber , Steel Dumbbell Rubber Coated 5 Kg , Steel Dumbbell Rubber Coated 7 Point 5 Kg , Steel Dumbell Rubber Coated 10 Kg , Steel Dumbbell Coated 15 Kg , Bench Press Inclined , Bench Press Flat , Music System , Bench Press Weight 5 Kg , Bench Press Weight 10 Kg , Bench Press Weight 15 Kg , Bench Press Weight 20 Kg , Bench Press Rod Flat , Bench Press Rod Incline , Punching Bag , Curling Rod Curved , Curling Rod Flat Short , Curling Rod Flat Long , Gym Mating 17 X 59 Ft , 4X4 Mirror , Motivational Posters , Gym Mat Synthetic Rubbered Gripped , Yoga Mat , Multistation 4 In 1 , Multistaion 7 In 2 , Dumbbell Rack Three Layered , Curling Weight Rack Two Layered , Cycling Machine , Gym Belt Total Quantity : 85

BRR:8433013 Bids Are invited for Cisco Meraki Enterprise License And Support Non Poe Access Switch Lic Ms120 24 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Cisco Meraki Enterprise License And Support Poe Access Switch Lic Ms120 24P 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Cisco Meraki Enterprise License And Support Distribution Switch Lic Ms350 24 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Cisco Meraki Enterprise License And Support Nkn Core Switch Lic Ms425 16 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Cisco Meraki Enterprise License And Support Core Switch Lic Ms425 32 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Cisco Meraki Advanced Security License And Support Firewall Lic Mx450 Sec 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Cisco Meraki Mr Enterprise License Access Points Lic Ent 3Years - Specifications And Accessories Shall Meet The Bid Specification Document Criteria Total Quantity : 373

BRR:8432992 Bids Are invited for 0311Aam0006kt Engine Overhaulling Gasket Complete Set With Head Gasket - Mahindra Genuine Parts , 0312Bam0009kt Piston Piston Pin And Piston Lock Std 03 Nos - Mahindra Genuine Parts , 0312Bam0010kt Piston Ring Set Std - Mahindra Genuine Parts , 0312Bau01970n Main Bearing Std 08 Nos - Mahindra Genuine Parts , 0312Bau01980n Big End Bearing 0 Point 10 06 Nos - Mahindra Genuine Parts , 3195 Crank Thrust Washer - Mahindra Genuine Parts , 3205 Connecting Rod Bushn 03 Nos - Mahindra Genuine Parts , Cylinder Sleeve Std 03 Nos - Mahindra Genuine Parts , 0310Dam00050n Inlet Valve 06 Nos - Mahindra Genuine Parts , 0310Dam00060n Exhaust Valve 06 Nos - Mahindra Genuine Parts , 0310Bm0111n Valve Oil Seal Inlet And Exhuast 12 Nos - Mahindra Genuine Parts , 0311Aau00020n Main Oil Seal Rear - Mahindra Genuine Parts , 0311Daz00061n Timing Cover Oil Seal Front - Mahindra Genuine Parts , 0310Bm0140n Hydraulic Slash Adjuster - Mahindra Genuine Parts , Valve Guide Inlet And Exhaust - Mahindra Genuine Parts , Valve Seat Inlet And Exhaust - Mahindra Genuine Parts , 0310Bm0080n Valve Lock - Mahindra Genuine Parts , 0310Eam00340n Timing Chain - Mahindra Genuine Parts , 0310Eam00380n Timing Chain Tensioner Assy - Mahindra Genuine Parts , Sf0603005 Timing Chain Adjuster Pad Lock - Mahindra Genuine Parts , 0310Eau00020n Timing Chain Adjuster Pad - Mahindra Genuine Parts , 0310Eau00030n Tensioner Arm Cylinder Eagle - Mahindra Genuine Parts , 0312Cam00851n Fly Wheel Assy - Mahindra Genuine Parts , 0801Baa0003kt Clutch Plate And Pressure Plate - Mahindra Genuine Parts , 0023127 Pilot Bearing - Mahindra Genuine Parts , 0802Caa06541n Release Bearing - Mahindra Genuine Parts , 0311Dam00421n Oil Pump Assy - Mahindra Genuine Parts , 0302Cam01551n Intake Manifold Assy - Mahindra Genuine Parts , 0304Aam02271n Radiator Assy - Mahindra Genuine Parts , 0304Dam05940n Radiator Hose Outlet - Mahindra Genuine Parts , 0306Jam00391n Belt Tensioner Bearing - Mahindra Genuine Parts , 0306Gam003

BRR:8432974 Bids Are Invited For Full Plate Dia 10 Point 5 Inches Approx Material Porcelien , Half Or Accent Plate Dia 9 Inch Approx Material Porcelien , Quarter Plate Dia 6 Inches Approx Material Porcelien , Tea Cups Capacity 200 Ml Approx Material Porcelien , Tea Saucers Dia 5 Point 5 Inches Approx Material Porcelien , Soup Bowl Capacity 300Ml Approx Material Porcelien , Chutney Bowl Capacity 80Ml Approx Material Porcelien Total Quantity : 840

BRR:8432949 Bids Are invited for Title1 - Cap Pre & Probiotic , Title2 - Tab Chlorzoxazone 500 Mg Diclofenac Sodium 50 Mg And Paracetamol 325 Mg , Title3 - Vitamin D-3 Sachet 1 Gm , Title4 - Tab Betahistatine Dihydro Chloride 8 Mg , Title5 - Clotrimazole Veginal Pessary 100 Mg , Title6 - Oral Rehydration Powder Sachet Of 20 Point 5 G , Title7 - Syp Norfloxacin 100 Mg Per 5 Ml Bott Of 30 Ml Total Quantity : 22300

BRR:8432943 supply of Micro Tips PP Autoclavable 0 point 2 to 10ul 1000 per Pkt , Micro Tips PP Autoclavable 2 to 200ul 1000 per Pkt , Micro Tips PP Autoclavable 200 ul to1000ul 500 per Pkt , Tissue Culture Petridish to Sterile PS 100mm pkt of 200 , Tissue Culture Petridish to Sterile PS 60mm pkt of 500 , Tissue Culture Petridish to Sterile PS 35mm pkt of 500 , Tissue Culture Flask with Filter cap Sterile PS25cm Pkt of 200 , Tissue Culture Flask with Filter cap Sterile PS75cm Pkt of 100 , Centrifuge Tube conical bottom PP Autoclavable 50 sterile pkt of 500 , Centrifuge Tube conical bottom PP Autoclavable 15 sterile pkt of 500 , Tissue Culture Plate Sterile PS12 wells pkt of 50 , Tissue Culture Plate Sterile PS 6 wells pkt of 50 , Reagent bottle Narrow mouth with screw cap bott of 100ml , Reagent bottle Narrow mouth with screw cap bott of 250ml , Reagent bottle Narrow mouth with screw cap bott of 1000ml , Fetal Bovine Serum USA Origin sterile to filtered suitable for cell culture suitable for hybridoma bott of 500ml , Collagenase from Clostridium Histolyticum pkt of 1Gram , Dispase II 1Gram , Penicillin Streptomycin solution Hybrid Max TM Bott of 100ml , Mesc Osteogenesis kit , Adipogenesis Kit , Monoclonal Anti CD 90 to FITC Antibody produced in mouse for 100 tests , Monoclonal Anti CD 44 FITC Antibody produced in mouse for 100 tests , Monoclonal Anti CD 34 FITC Antibody produced in mouse for 100 tests , Monoclonal Anti CD 45 FITC Antibody produced in mouse for 100 tests , Monoclonal Anti CD 11b FITC Antibody produced in mouse for 100 tests , Monoclonal Anti CD 29 FITC Antibody produced in mouse for 100 tests , Monoclonal Anti CD 73 Antibody produced in mouse Bott of 100ug , Monoclonal Anti CD 105 FITC Antibody produced in mouse for 100 tests , Anti CD 166 ALCAM Antibody clone TAG 1A3200 Ul , Monoclonal Anti CD 33 FITC Antibody produced in mouse for 100 tests , BMP Protein Human Recombinant Bott of ug , Dulbeccos Modified Eagles Medium Low Glucose Bott of 500ml , PLT Max Human Platelet Lysate100ml

BRR:8432924 Bids Are invited for M4 Chip Based Laptop , Laptop Charger , A18 Chip Mobile Phone Black , A18 Chip Mobile Phone Lavender , Mobile Charger Total Quantity : 10

BRR:8432856 Bids Are invited for 4 Ch Dvr , Bullet Camera 8Mp , 1Tb Hdd , Smps , Pvc Box , Cat6 Cable , Bnc Balun , Dc Pin Total Quantity : 20

BRR:8432854 Bids Are invited for Etophyllin 115 Mg Plus Thiophyllin 35 Mg Sr 150 Mg Tab , Paracetamol 650 Mg Tab Dolo , Gliclazide Xr 60 Mg Tab , Tab Thyroxin 100 Mcg , Alprazolam 0 Point 25 Mg Tab , Antacid Gel Bottle Of 400 Ml Digene , Carvedilol 6 Point 25 Mg Tab , Pantoprazole 40 Mg Plus Domperidone Sr 30 Mg Cap , Clidinium Bromide 2 Point 5 Mg Plus Chlordiazeposide 5 Mg Tab Total Quantity : 11800

BRR:8432853 Bids Are invited for Aspirin 75 Mg Tab , Tab Methylcobalamine 1500 Mcg , Pregabalin 75 Mg Plus Methylcobalamine 1500 Mcg Tab , Frusemide 20Mg Plus Spironolactone 50 Mg Tab , Isosorbide Mononitrate 20 Mg Tab , Cetrizine 5Mg Plus Paracetamol 325Mg Plus Phenylephrine Hcl 5Mg Cold Plus , Doxophylline 400 Mg Tab , Etizolam 0 Point 5 Mg Tab , Tab Phenytoin Sodium Er 300 Mg Total Quantity : 31800

BRR:8432809 Bids Are invited for File Cover Printed Colour , White File Cover , Multi Colour Flag , Register 200 Pages , Register 300 Pages , Register 500 Pages , Apsara Pencil , Stick Pad Large , Stick Pad Medium , Stapler Pin Small , Stapler Pin Large , Envelope Clothed Large File Size , Envelope A4 Size , Envelope Small Yellow 11 Inch X 5 Inch , Binder Clip 19 Mm , Binder Clip 25 Mm , Binder Clip 32 Mm , Binder Clip 41 Mm , Permanent Marker , White Board Marker , Cd Marker , Reynolds Glue Stick 25 Gm , Pin Point Ball Pen , Reynolds Pen , Small Tag , Big Tag Green Colour , Steel Scale , Fevicol 500 Ml , Drawing Sheet Blue And Yellow And Red And Orange And Green , Duracell Wall Clock Large , Highlighter Marker , Talc Sheet 50 Mtr Roll , Ink Pad Big , Uniball Pen Refill , Uniball Pen Blue , Uniball Pen Black , Uniball Pen Red , Transparent Tape Half Inch , Transparent Tape 1 Inch , Transparent Tape 2 Inch , Brown Tape 2 Inch , Durocell Samll Aaa , Plastic Coated U Clip , Drafting Pad , Paper Cutter , Whitener , Paper Weight , Poker , Pen V7 , Pen V7 Refill , Paper Pin , Photo Paper , Bond Paper Total Quantity : 6836

BRR:8432797 Bids Are Invited For Bullet Camera , Ptz Camera , Nvr 32 Channel , Cat 6 Cable , Conduit Pipe , Fibre Cable , Poe Switch , Media Converter , Outdoor Camera Box , Hard Disk 8 Tb , Outdoor 2U Rack , Indoor 4U Rack , Led Tv 42 Inch , Led Tv 32 Inch , Anpr Camera , Nvr 8 Channel Total Quantity : 17191

BRR:8432788 Bids Are Invited For Test Point Total Quantity : 28

BRR:8432730 Bids Are Invited For Spare / Add On Antenna For Transreceiver / Repeater - Mobile / Static / Handheld Total Quantity : 700

BRR:8432683 Bids Are invited for Walkie Talkie Phone , Stanley Multi Tool Kit , Esd Mat Complete Roll , Mini Plier Small Taparia - Esd Mat Complete Roll , Mini Plier Large Taparia - Esd Mat Complete Roll Total Quantity : 13

BRR:8432611 Bids Are invited for Aluminium Door Size 5 X 7 Point 5 Feet , Aluminium Door Size 3 X 7 Feet , Ss Pole 3 Feet , Ss Chain Link , Iron Kadhai , Rice Strainer Small , Rice Strainer Big , Water Jug , Soup And Tea Channi , Patila Aluminium , Parat Aluminium Big Size , Patila Steel With Lid , Kadai Aluminium , Kadu Kas , Table Cover , Table Matt , Salt And Pepper Container , Table Lamp , Led Flood Light 100 Watt Total Quantity : 211

BRR:8432580 Bids Are invited for Cp Plus 4 Mp Ip Day Night Camera Dome - Cp Plus 4 Mp Ip Day/ Nightcamera (Dome) , 4K 16 Channel Nvr Cp Plus - 4K 16 Channel Nvr ( Cp Plus) , 56 Inch 4K Full Hd Display Samsunglg - 56 Inch 4K Full Hd Display (Samsung/Lg) , 16 Port Poe Switch D Link - 16 Port Poe Switch ( D Link) , Utp Cat 6 Cable , Caping And Caring , Rj 45 Connector , 15 Mtr Hdmi Cable , 8 Tb Western Digital Survellance Hard Disk Total Quantity : 284

BRR:8432527 Bids Are Invited For Boom Barrier , Scanner , Mdc , Anpr , Inverter 1400Va , Gps Tracker Vehicles , Rfid Tags For Defence Vehicles , Pc With Allied Accessories For Rfid , Oled Display Screen 55 Inch For Rfid , Bullet Camera , Network Video Recorders With Storage , Installation Charges Total Quantity : 387

BRR:8432463 Bids Are Invited ForSupplying, installing, testing and commissioning of Inverter Green Room Air Conditioner of 1.0 TR capacity, suitable for operation on 230V, 50 Hz, single phase AC supply, complete with indoor and outdoor units, factorycharged with eco-friendly green refrigerant R-32 (Low GWP, Zero ODP) in compliance with latest environmental and Green RAC norms of GeM. The Air Conditioner shall meet the following minimum technical requirements: Inverter compressor technology for enhanced performance and energy savings. Minimum 3-Star Energy Rating as per the latest BEE guidelines / labeling norms (current year). 5-in-1 Convertible Cooling Mode (or equivalent OEM technology) to adjust cooling output based on requirement and energy utilization. Turbo / Fast Cooling Mode for rapid temperature control and quick operational efficiency. Wide-angle air swing / louvre movement ensuring uniform air distribution across the room. Anti-Corrosive Blue Fins / Hydrophilic Fin Coating on both condenser and evaporator coils for extended life and enhanced performance in corrosive climatic conditions. 100% copper condenser and refrigerant piping coil system for high efficiency and durability. Minimum 3 meter copper refrigerant piping, insulation, and connections between indoor and outdoor units. Suitable power cable, interconnecting control wiring, drain piping, fasteners and supports required for the complete system installation. Powder-coated L-shaped outdoor mounting stand of heavy gauge steel for safe installation of outdoor unit. 4 kVA voltage stabilizer (IS-certified) suitable for inverter AC with ITDS/low/high voltage protection. All required consumables, brackets, installation materials, commissioning tools, vacuuming, nitrogen leak testing, etc. Transportation, loading, unloading, handling, installation and commissioning complete in all respects as per OEM guidelines and GeM norms. Warranty & Service Requirements: Minimum 1-year comprehensive onsite warranty on the complete unit including PCB, motors, coils, remote, parts & services. Additional 9-year extended warranty on compressor (OEM certified and documented). OEM-backed service support must be available within India with spare parts availability throughout the lifecycle of the product. Standards & Compliance Requirements (Mandatory): Energy Rating Certificate (BEE) – Current applicable label year. Green Refrigerant (R-32) compliance confirming Low GWP & Zero ODP. Product shall comply with relevant BIS/IS standards for room air conditioners. Installation and commissioning shall comply with OEM installation procedures and GeM service-level guidelines. Completion Requirements: The work shall be completed with all accessories and materials as required, ensuring fully operational and tested AC installation, including demonstration and hand-over to the user department, to the satisfaction of the Engineerin-Charge. 1.0 Pieces Supplying, installing, testing and commissioning of Inverter Green Room Air Conditioner of 1.5 TR capacity, suitable for operation on 230V, 50 Hz, single phase AC supply, complete with indoor and outdoor units, factorycharged with eco-friendly green refrigerant R-32 (Low GWP, Zero ODP) in compliance with latest environmental and Green RAC norms of GeM. The Air Conditioner shall meet the following minimum technical requirements: Inverter compressor technology for enhanced performance and energy savings. Minimum 3-Star Energy Rating as per the latest BEE guidelines / labeling norms (current year). 5-in-1 Convertible Cooling Mode (or equivalent OEM technology) to adjust cooling output based on requirement and energy utilization. Turbo / Fast Cooling Mode for rapid temperature control and quick operational efficiency. Wide-angle air swing / louvre movement ensuring uniform air distribution across the room. Anti-Corrosive Blue Fins / Hydrophilic Fin Coating on both condenser and evaporator coils for extended life and enhanced performance in corrosive climatic conditions. 100% copper condenser and refrigerant piping coil system for high efficiency and durability. Minimum 3 meter copper refrigerant piping, insulation, and connections between indoor and outdoor units. Suitable power cable, interconnecting control wiring, drain piping, fasteners and supports required for the complete system installation. Powder-coated L-shaped outdoor mounting stand of heavy gauge steel for safe installation of outdoor unit. 4 kVA voltage stabilizer (IS-certified) suitable for inverter AC with ITDS/low/high voltage protection. All required consumables, brackets, installation materials, commissioning tools, vacuuming, nitrogen leak testing, etc. Transportation, loading, unloading, handling, installation and commissioning complete in all respects as per OEM guidelines and GeM norms. Warranty & Service Requirements: Minimum 1-year comprehensive onsite warranty on the complete unit including PCB, motors, coils, remote, parts & services. Additional 9-year extended warranty on compressor (OEM certified and documented). OEM-backed service support must be available within India with spare parts availability throughout the lifecycle of the product. Standards & Compliance Requirements (Mandatory): Energy Rating Certificate (BEE) – Current applicable label year. Green Refrigerant (R-32) compliance confirming Low GWP & Zero ODP. Product shall comply with relevant BIS/IS standards for room air conditioners. Installation and commissioning shall comply with OEM installation procedures and GeM service-level guidelines. Completion Requirements: The work shall be completed with all accessories and materials as required, ensuring fully operational and tested AC installation, including demonstration and hand-over to the user department, to the satisfaction of the Engineerin-Charge. Supplying, installing, testing and commissioning of Inverter Green Room Air Conditioner – Cassette Type Unit of 4.0 TR capacity, suitable for operation on 230V, 50Hz, single-phase AC supply, complete with indoor cassette unit with decorative panel and factory-charged outdoor condensing unit filled with eco-friendly refrigerant R-32 (Low GWP, Zero ODP) meeting Green RAC environmental compliance norms as per GeM category standards. The system shall meet the following minimum technical specifications: Technical Performance & Construction Features: Equipped with high-energy efficient inverter compressor technology for optimized performance and reduced energy consumption. Minimum 2-Star Energy Rating as per latest BEE labeling norms applicable for the current year. 100% copper condenser coil to ensure efficient cooling performance and longer system operational life. Anti-corrosive Blue Fin / Hydrophilic Fin coating on condenser coil for enhanced durability in coastal/corrosive environments. Indoor unit shall be ceiling-mounted cassette design with uniform 360° air throw for balanced air distribution. Decorative fascia panel to be provided as standard accessory, ensuring uniform aesthetics. Accessories, Installation Materials & Scope of Work: The scope shall include supply and installation of the following: Suitable L-shape powder-coated outdoor unit mounting stand for floor or wall installation (as site conditions permit). Warranty & Support Requirements (Mandatory): Minimum 1-year comprehensive onsite warranty covering full AC unit including PCB, motors, coils, accessories and service. Additional 4-year extended warranty on the compressor from OEM. OEM shall ensure availability of authorized service facility and spare support throughout lifecycle of product as per GeM norms. Supplying & placing in High Back Chair SEAT/BACK ASSEMBLY: The seat is made up of 1.2 + 0 1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mould d glass filled nylon & upholstered using Quitted Leatherette fabric * SEAT SIZE(Standard Seat Depth) : 47.0 cm (W) x 49.5 cm. (D) * BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression ARMRESTS : The adjustable armrest is designed with the following features • Up-Down adjustment— 8 steps (8.0+0.Scm range) • Height adjustable armrest structure which is Chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height FRONT PIVOT SYNCHRO MECHANISM: The adjU5 td ble tilting mechanism is designed with the following features. • 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.• Tilt tension adjustment• 4-position locking with anti-shocK feature.• Seat/back tilting ratio of 1.2 Pneumatic Height Adjustment : The pneumatic height adjustment has adjustment stroke of 10.0+-0.3 PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2 + 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedesta! is 66.0+0 Scm. Pitch-center dia. (76.0+1.0 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. Pieces 5.0 Supplying & placing in Mid Back Chair Seat / Back Assembly :- The seat and back are made up of 1.2 + / - 0.1 cm thick hot –pressed plywood measured as per QA method described in OCP-QLTA-PA 14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area.The chair is available in three models:- Mid Back Size 47.5 cm (W) x 58.0 cm (H) Seat Size :- 47.0 cm (W) x 48.0 cm (D) High Resilience (HR) Polyurethane Foam: - The HR polyurethane foam is moulded with density = 45+ /- kg/m3 and hardness load 16 + /- kgf as per IS: 7888 for 25% compression. Armrests: - The one Piece armrest are injection moulded from black Co-polymer Polypropylene. Centre Tilt Synchro Mechanism: - The mechanism is designed with following feature:- 360 revolving type, Upright position locking, Tilt tension adjustment, Seat / Back tilting ratio of 1:3. Tubular Frame: - The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of 0 2.54 + / - 0.03 cm x 0.2 +/- 0.016 cm thk. M.S. ERW Tube. Pneumatic Height Adjustment: - The pneumatic height adjustment has an adjustment stroke of 12.0 + / - cm. Telescopic bellow Assembly:- The bellow is 3 piece telescopic type and injection moulded in black polypropylene. Pedestal Assembly:- The pedestal is injection moulded in black 33% glass-filled Nylon – 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 + /- 0.5 cm. Twin Wheel Castors:- The twin wheel castors are injection moulded in Black Nylon. Pieces 6.0 Supplying & placing in Visitor Chair SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40- 60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Total Quantity : 43

BRR:8432420 Bids Are Invited For Inj Ciprofloxacin - 200 Mg Per 100 Ml , Inj Metronidazole - 500 Mg Per Bott Of 100 Ml , Inj Atropine - 0 Point 6 Mg 1 Ml , Inj Pheniramine - 22 Point 75 Mg Per Ml , Inj Frusemide - 20 Mg 2 Ml , Eye Drop Ciprofloxacin Plus Dexamethasone - Bott Of 5 Ml , Ear Dro Clotrimazole Plus Lignocaine - Bott Of 10 Ml , Syp Bromohexine - Bott Of 100 Ml , Human Diploid Cell Rabies Vaccine - 2 Point 5 Iu Singal Dose , Inj Tetanus Toxid - Vial Of 5 Ml 10 Dose , Inj Tramadol - 50 Mg Per Ml 1 Ml , Hydrogen Peroxide Sol - Bott Of 500 Ml , Syp Amoxycillin Plus Clavulanic Acid - 200 Mg Per 5Ml Plus 28 Point 5 Mg Per Ml Bott Of 30 Ml , Cap Glucosamine Plus Chondrotin Sulphate - 250 Mg Plus 200 Mg , Inj Dopamine Hcl - 40 Mg Per Ml 5 Ml , Inj Etophylline Plus Theophylline - Per 2 Ml Inj , Syp Domperidone - 1 Mg Per Ml Bott Of 30 Ml , Tab Amlodepine - 5 Mg , Tab Telmisartan - 40 Mg , Syp Dicyclomine - 10 Mg Bott Of 30 Ml , Syp Zinc - 20 Mg Per 5 Ml Bott Of 100 Ml , Inj Lignocaone Hcl - 2 Percent 30 Ml , Inj Midazolam - 5 Mg 1 Ml , Inj Paracetamol Infusion - 1000 Mg Per 100 Ml , Inj Morphine - 15 Mg 1 Ml , Tab Tramadol Hcl - 50 Mg , Syp Fexofenadine - 30 Mg Per 5 Ml 60 Ml Bott , Inj Lorazepam - 2 Mg Per Ml 2 Ml , Tab Chlorzoxazone Plus Diclofenac Sod Plus Paracetamol - 500 Mg Plus 50 Mg Plus 325 Mg , Inj Amiodarone Hcl - 150 Mg 3 Ml , Glycerine - Bott Of 100 Ml , Povidone Iodine Germicidal Gargle - 2 Percent W Per V , Bacillus Clausii - 2 Billion Spores Per 5 Ml , Inj Hyoscine Bromide - 20 Mg Per Ml , Tab Alprazolam - 0 Point 25 Mg , Syp Terbutaline Sulphate Plus Bromohexine Hcl Plus Guaiphenesin - 1 Point 25 Plus 4 Mg Plus 50 Mg , Inj Dextrose - 25 Percent 25 Ml , Inj Sodium Bicarbonate - 7 Point 5 Percent Amp Of 10 Ml , Inj Calcium Gluconate - 10 Percent 10 Ml , Dressing Medicated Adhesive Single Strip - 25 Cm Into 6 Cm , Tab Pantoprazole Plus Domperidone - 40 Mg Plus 10 Mg , Diclofenac Spray - Bott Of 55 Gm , Corn Cap - 10 Cm In To 5 Cm , Syp Montelukast Plus Levocetrizine - 5 Mg Plus 2 Point 5 Mg Bott Of 60 Ml , Choline Salicylate And Benzalknium Chloride Gel - Gel Of 10 Ml , Amylmetacresol And Diclrobenzyl Alcohol Tab - 2 Comma 4 Cofsils , Inj Phenytoin Sod - 75 Mg Per Ml 2 Ml , Resp Levosalbutamol - 1 Point 25 Resp Of 2 Point 5 Ml , Resp Ipratropium Bromide Respirator Soln - 500 Mcg Per 2 Ml Resp , Syp Iron Pead - Iron 25 50 Mg Folic Acid 500 Mg Bott Of 200 Ml , Syp Multivitamin - Containing Vit C Lysin Vit D3 Vit E Vit B5 Bit B6 Biotin Bott Of 200 Ml , Ecg Paper - 210 Into 20 Mtrs , Tab Mefenamic Acid Plus Dicyclomine - 250 Mg Plus 10 Mg , Inj Adenosine - 3 Mg Per Ml 2 Ml Inj , Inj Dexamethasone Sod - 4 Mg Inj 2 Ml , Inj Tranexamic Acid - 500 Mg 5 Ml , Inj Mannitol - 20 Percent Bott Of 350 Ml , Tab Cefpodoxime - 200 Mg , Tab Nitrofurantoin - 100 Mg , Syp Ofloxacin Plus Ornidazole - Bott Of 60 Ml , Isapgol - Ispaghula Husk 3 Point 5 Gm Sachet , Tab Prednislone - 20 Mg , Tab Dexamethasone - 4 Mg , Syp Paracetamol Plus Ibuprofen - Bott Of 60 Ml , Para Dicchlorobenzene Benzocaine Chlorbutol Turpentine Oil - 2 Percent 2 Point 7 Percent 5 Percent 15 Percent Bott Of 10 Ml , Tab Calcium Carbonate - 500 Mg Plus Vit D3 500 Iu , Nasal Soray Midazolam - Bott Of 5 Ml , Tab Propranolol Tr - 40 Mg Total Quantity : 45987

BRR:8432391 Bids Are Invited For Custom Bid For Services - Supply And Installation Of Split Ac 1 Point 5 Tr Alongwith Voltage Stablizer

BRR:8432380 Bids Are Invited For Caution Barricade Tape Roll 200Mtr 3Inch Red And White Barcode Tape , Road Traffic Cones 750Mm Height With Reflective Strips With Chain And Hooks. , Light Weight Safety Gum Boots Standard Safety Anti Slip And Water Proof , Heavy Duty Rubber Hand Gloves Total Quantity : 33

BRR:8432229 Bids Are invited for Hikvision Nvr 08Ch - Repair Of Tools And Plants Items At Af Stn Gwalior , Hikvision Poe Swich 8 Plus 2 Port - Repair Of Tools And Plants Items At Af Stn Gwalior , Ranz Power Adapter 12V 2A - Repair Of Tools And Plants Items At Af Stn Gwalior , Logitech Wireless Mouse - Repair Of Tools And Plants Items At Af Stn Gwalior , Canon 2900 Printer Teflon And Pressure Roller - Repair Of Tools And Plants Items At Af Stn Gwalior , Canon 2900 Formatter Board - Repair Of Tools And Plants Items At Af Stn Gwalior , Dell Led Monitor Logic Card - Repair Of Tools And Plants Items At Af Stn Gwalior , D Link Cat6 Cable 100 Mtr - Repair Of Tools And Plants Items At Af Stn Gwalior , Repiar Of Laser Jet Managed Mfp E82550 - Repair Of Tools And Plants Items At Af Stn Gwalior , Repair Of Hp Color Laser Jet Pro Mfp M181fw - Repair Of Tools And Plants Items At Af Stn Gwalior , Repair Of Dispenser - Repair Of Tools And Plants Items At Af Stn Gwalior , Repair Of Kent Ro - Repair Of Tools And Plants Items At Af Stn Gwalior , Repair Of Lawn Movers - Repair Of Tools And Plants Items At Af Stn Gwalior , Repair Of Bush Cutter - Repair Of Tools And Plants Items At Af Stn Gwalior Total Quantity : 17

BRR:8432225 Bids Are invited for Dinning Table - Size 12 Into 10 , Dinning Table - Size 10 Into 08 , Sony Speaker - Ht S40r , Electric Blower - Branded , Office In Out Tray - Three Portion , Door Curtain - Standard Size , Window Curtain - Standard Size , Washing Machine - 8 Oblique 8 Point 5 Kg , Washing Machine - 4 Oblique 5 Kg , Study Lamp , Humidifier - 4 Ltr , Water Camper - 20 Ltr , Appointment Board Plate - Steel , Calender Frame - Size 31 By 21 Point 5 , Writing Of Appointment Board - With Golden Colour , New Appointment Board - Normal W/O Framing , New Appointment - With Steel Plate +Acy- Wooden Framing Total Quantity : 99

BRR:8432211 Bids Are invited for Reynolds Blue Pen - Nk , Reynolds Red Pen - Nk , Reynolds Black Pen - Nk , Natraj Pencil - Nk , Sketch Pen Black - Nk , White Board Marker Blue - Nk , White Board Marker Black - Nk , Glue Stick - Nk , Whitener - Nk , Eraser - Nk , Sharpner - Nk , Paper Pin - Nk , Stapler Big - Nk , Stapler Pin Big - Nk , Stapler Small - Nk , Stapler Pin Small - Nk , Paper Cutter - Nk , Paper Cutter Blade - Nk , Binder Clip Small - Nk , Binder Clip Medium - Nk , Binder Clip Large - Nk , Binder Clip Big - Nk , U Clip - Nk , White Board Duster - Nk , Transparent Tape 0.5 Inch - Nk , Transparent Tape 1 Inch - Nk , Transparent Tape 2 Inch - Nk , Blue Tape 0.5 Inch - Nk , Yellow Tape 0.5 Inch - Nk , Red Tape 0.5 Inch - Nk , Stamp Pad Med - Nk , Brown Tape 2 Inch - Nk , Uniball Air Micro Pen Blue - Nk , Uniball Eye Fine - Nk , Pilot V Sign Blue Med Point Tip Pen - Nk Total Quantity : 273

BRR:8432196 Bids Are Invited For PTMT Tap Fitting , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 , HYDRAULICALLY REGULATED DOOR CLOSERS , Stainless Steel Butt Hinges as per IS 12817 , M - Seal as per IS 9197 , Hasps and Staples as per IS 363 , Towel Rail / Ring / Rack / Hooks for Bathroom , Curtain Pipe, Sider and mounting bracket , PVC gitti , Unplasticized PVC Pipes for Potable Water Supplies as per IS 4985 , Urinal Bowls as per IS 2556 (Part 6) , PVC water Storage tank capacity for 1000 ltr tank , PVC water Storage tank capacity for 500 ltr tank , CP health faucet 15mm with hook and1 point 5 mtr tube , PTMT float valve 15mm complete with ball and rod , Looking mirror 600x450x6mm with Alu Frame , PTMTFloat valve 20mm complete with ball and rod , Lid for water Tank for 1000 and 500 ltr , Bathroom cabinet single mirror 450x600mm , Double spring floor machine heavy duty ISI marked , GI Union 15mm dia ISI marked , GI Tubing 15mm med grade ISI marked , GI Tee 20mm ISI marked , GI Tank Nipple 15 mm dia , GI Tee 15mm dia ISI marked , GI Union 20mm dia ISI marked , GI tank Nipple 20mm dia , GI elbow 15mm dia ISI marked , GI Socket reducer 15x20mm dia ISI marked , GI socket 15mm dia ISI marked , Rubber strip for door seal , GI Elbow 20mm dia ISI marked , GI Tubing 25mm med Gde ISI marked , GI plug 15mm , GI Socket 20mm dia ISI marked , Stainless steel Kitchen plate rack Prayag 24x24x10inch 304 gde , Stainless steel knob lock for door lock , Kitchen Plate rack Prayag Stainless Steel 24 x 36 x 10inch Gde 304 , looking Mirror 24 X 18 inch with PVC frame , GI tubing medium grade 20mm ISI marked , Door magnetic Catcher of size 4x5x4cm , MS sliding door bolt 300mm , G.I. Nipple 20mm dia 50mm long , M.S Screws 20mm , G.I. Nipple 15mmx50mm , GI 20mm Plug , M.S Screws 15mm , M.S Screws 50mm , Nails wire 40mm long , Nails wire 25mm long , Steel Screws 8 oblique 19 , Steel Screws 25mm , PTMT Shower 15mm with ARM , SS wire mesh point 56mm dia 1 point 20 mtr wide and 15mtr , PVC SWR Pipe 110mm ISI marked , Frosted glass sheet 3mm thick size 6 feetx4feet , MS Door Spring rat rail type 200mm , MS powder coated brackets with fancy knob for 20mm dia curtain rod , Plain wooden beading of size 20mmx20mm , PVC SWR Pipe 75mm ISI marked , GI Nipple 15mmx100mm Long , GI Nipple 15mmx150mm Long , GI Nipple 15mmx75mm Long , GI Nipple 20mmx100mm Long , GI Nipple 20mmx150mm Long , GI Nipple 20mmx75mm Long , GI Reducing Elbow 20x15mm , Prelam MDF board 8feetx4feetx12mm BSL exterior grade , GI Unions 25mm ISI marked , GI Union 50mm ISI marked , GI Unions 40 mm ISI marked , GI Reducer elbow 40x25mm , GI Tubing 50mm med Grade ISI marked , GI Tubing 80mm med Gde ISI makred , GI Elbow 40mm ISI marked , GI Elbow 50mm ISI marked , GI Elbow 25mm ISI makred , GI Tee 25mm ISI marked , GI Tee 40mm ISI marked , GI Union 15mm ISI makred , GI Tee 50mm ISI marked , GI Socket 50mm ISI marked , GI Socket 40mm ISI marked , GI Socket 25mm ISI marked , GI Reducer elbow 50mm ISI marked , GI Reducer elbow 25x15mm ISI marked , GI Reducer elbow 20mmx25mm ISI makred , GI Tubing 40mm med Gde ISI marked , Block Board BWP Grade ISI marked of size 8x4x18mm , Prelam Board BSL 8feetx4feetx18mm HDHMR Exterior Gde , Prelam Particle Board BSL exterior grade 8feetx4feetx9mm , Prelam Particle Board exterior grade 8feetx4feetx18mm , Prelam MDF Board BSL of size 8x 4 x 18mm OST Exterior gde , Prelam MDF Board BSL of size 8x 4 x 18mm OST Exterior Total Quantity : 20

BRR:8432087 Bids Are invited for Plastic Tarpaulin , Tape 3 Inch , Thermal Paper , Harness , T Shirt , 3 Point Sling , Steel Carabiner , Black Cloth , White Distemper , Ply Cutting Blade , Hand Planer , Ladies Slipper , Gents Slipper , Electric Tube Rod For Heat Piller Total Quantity : 1932

BRR:8432022 Bids Are Invited For CBR Value Digital Automatic CBR Testing Machine with accessories as per IS 2720 Part 16 , Marshal Stability Automatic Analogue Marshal Stability apparatus 100 KN for 4 inch and 6 inch , Moisture content of material infrared Moisture Meter , Digital Thermometer minus 50 degree celsius to 280 degree celsius , Digital Screw Gauge , 50 Kg Capacity Electronic balance Type accuracy 2 gm , Digital Electronic Balance 5 kg Capacity 0 point 50 gm accuracy Specification as per uploadedPDF document , Laboratory Concrete Mixer consists of a steel vessel of 30 litres mounted on a frame Specification as per uploaded PDF document , Vibrating Table Vibrating Tables of table top size 100cm x 100cm plus or mius 10mm Specification as per uploaded PDF document , Aggregate Impact Tester , Crushing Value Apparatus , Sample Tray GI , Slump Test Apparatus , Loss Angeles abrasion testiing machine with counter , Sieve Shaker Motorised for 20 cm dia Sieve with Built in Digital Timer , Digital Compression Testing Machine Capacity 3000kN conform to IS14858 Specification as per uploaded PDF document , Standard Test Sieves GI Frame A set of 26 Different size , Standard Test Sieves Brass A set of 35 Differencet Size , Ennore Standard Sand 50 Kgs Bag , Specific Gravity Apparatus , Speedy Moisture Meter , Bitumen Extrator Motorized with Vaualble Speed with Digital RPM Inidicator , Chemical Balance 100 gm Capacity accuracy 0 point 001 gm , Stop Watch 1 by 5 sec accuracy , Measuring Cylinder 100 ml Make Borosilicate Glass , Measuring Cylinder 500 ml Make Borosilicate Glass , Measuring Cylinder 1000 ml Make Borosilicate Glass , Rain guage automatic recording type with chartconforming to IS 5235 , Flakiness Index Thickness Gauge Specifications as per uploaded PDF document , Digital Thermometer Power Source Battery Specifiction as per uploaded PDF document , Cube Mould 150 mm made of cast iron Specification as per uploaded PDF documents , Cube Mould 70 point 6mm made of cast iron Specification as per uploaded PDF document , Le Chatelier apparatus for soundness complete set onforming to IS 6932 Part X , Engine Core Cutting Machine , Stanone STMH1 Type N Rebound Concrete Test Hammer , Curing tank Specification as per uploaded PDF document , Sand Pouring Cylinder Apparatus Ref Standard Specifications as per uploaded PDF documen Total Quantity :

BRR:8431999 Bids Are Invited For 1 Sodium Bicarbonate seven point five percent solution inj ampoule of ten ml 2 Povidone Iodine ten percent solution bott of one hundred ml 3 Ascorbic acid one hundred mg tab 4 Methylprednisolone four mg tab 5 Levosalbutamol fifty mcg + Ipratropium twenty mcg metered dose inhaler two hundred dose units 6 Cefuroxime tab two hundred fifty mg 7 Ciprofloxacin two hundred fifty mg tab 8 Clarithromycin two hundred fifty mg Tab 9 Cefixime one hundred mg tab 10 Tab Ofloxacin two hundred mg Total Quantity : 2930

BRR:8431972 Bids Are Invited For Upgrading Oblice Improving Central Air Cooling System At Ge Ep Jodhpur , Dismanting Of All Unsv Items From Existing Air Cooling Plant And Re Assembling All Required Items Oblice Parts After Repairing As Per Rfp Directed By Offg Age Em , S And F Of Poly Urethane Insulation Sheet 12 Mm Thick White For Heat Insulation 30 Mtrs , S And F Of Float Valve 02 Nos , S And F Of Cooling Plant Super Structure Of Approx Size 900X900x1425 Mm 02 Nos , Replacement Of Superior Quality Pvc Pipe As Required 02 Nos , S And F Of Multi Stand Wire 02 Nos , Repairing Oblice Oilling Oblice Greasing Of Plant Grills 01 Job , Repairing Oblice Replacing 0 Point 63Mm Thick Gi Tuunel 01 Job , Repairing Oblice Replacing Of Exhaustaor 24 Inch 1000 Rpm 0 Point 5 Hp 01 Job , Repairing Oblice Replacing Of Submersible Pump 800 Msp 02 Sets 01 Job , Painting Of Cooling Plant Internal Body And Plant Stand With Superior Quality Bituminous Paint 02 Coats 01 Job , Painting Of Cooling Plant Outer Body With Two Coats Of Smoke Gray Paint Make Berger Nerolac Shalimar Or Equivalent Over A Coat Of Zinc Chromate , S And F Plant Stand 920X920x300mm Apr Of Ms Angle , S And F Of Grass Pad And Replacing The Same After 6 Months , Amc For Smooth And Efficient Functioning Of Complete Cooling Plant For One Year From The Date Of Completion Of Job Total Quantity : 16

BRR:8431965 Bids Are Invited For Servicing Oblice Upkeeping Of Pump Water Centrifugal 38 Point 1 Mm 3 Lps At 15 Mtr 15 Nos At Ge Ep Jodhpur , Spindle Sleeve Socket Terminal , Washer Thrust Oilite , Pin Cotter Split Steel 6 40Mm , Chain Ron Twister 12 Swg 200 M , Bush Oilite Top Flanged , Casing Pump , Cover Top Cap Socket Terminal , Joint Top Bottom Packless Gland , Gland Top Bottom Packless , Impeller , Key Impeller , Key Distance Sleeve , Sleeve Distance , Nut Spindle , Packing Pump Casing , Bush Oilite Bottom , Packing Bottom Cover , Cap Spigot Terminal , Nut Coupling Casing End , Nipple Coupling Casing End , Washer Leather , Nipple Coupling Suction End , Nut Coupling Suction End , Strainer , Coupling Quick Action Fde , Stud Pump Casing , Stud Top Oblice Bottom Cover , Screw Set Anti Twister , Washer Anti Twister , Screw Ch Point Hd 4 Point 75 Mm , Nut Hex 3 By 8 Inch Bsw , Nut Hex 5 By 16 Inch Bsw , Screw Grub 4 Point 76 Mm 3 By 16 Inch Bsw 6 Mm Total Quantity : 331

BRR:8431896 Bids Are invited for K One A4 Size Paper , Paper A5 Fs Size , Banner Roll Of Honoer , Banner Our Sena Medal , Table Cloths , Milton 5 Sec Tiffin , Havells Wire 1 Point 5Mm 180Mtr , Havells Wire 1 Point 5Mm 90Mtr , Pvc Flooring Mat , Stainless Steel Net Dish Cover , Pvc Rubber Mat 6X4 Feet , Milton Casserole 5 Ltr , Morphy Richards Toaster , Gym Mats 20Mm , Traffic Baton Light , Dispenser Bottle 20 Litre , Gooseneck Mic , Microphone Cable , Collar Mic With Cable , Amplifier 250W , Handheld Mic , Mic Cable 5 Mtr , Wireless Mic , Velvet Cloth , Rubber Water Pipe 1 Inch , Flower Pot , Red Terracotta , Name Plate , Green Paint Total Quantity : 566

BRR:8431868 De-Siltation Of Ungamel Channel From Khuga-Ungamel Confluence Point To End Point Of Both Distributary Channels Under Loktak Power Station.

BRR:8431789 Supply Of Flange, Part No:- Jk-Fsd-1107Flange, Part No:- Jk-Fsd-1107,Flange, Part No:- Jk-Fsd-1107 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Dc/Dc Convertor (110 V To 24 V Dc) Part No:- Jk-Fsd -1120 [ Warranty Period: 30 Mon Ths After The Date Of Delivery ] ] , Prosense Display Card, Part No:- Jk-Fsd -1140 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Display Leds Part No .Jk -Fsd -1127 [ Warranty Period: 30 Months After The Date Of Deliv Ery ] ] , Prosense Reley Card Part No:- Jk-Fsd-1125. [ Warranty Period: 30 Months After The Da Te Of Delivery ] ] , Pipe Tee Connector, Part No:- Jk-Fsd-1108 [ Warranty Period: 30 Months After The Date Of Delivery ] ] Page 1 Of 9 Run Date/Time: 01/11/2025 12:51:22Gsd/Nbq/N F Rly Tender Document , Prosense Laser Detector Module, Part No:- Jk -Fsd-1123. [ Warranty Period: 30 Mon Ths After The Date Of Delivery ] ] , Sampling Point Cover, Part No.- Jk-Fsd-1110 [ Warranty Period: 30 Months After The Da Te Of Delivery ] ] , Action Flasher Light, Part No. Jk-Fsd-1143 [ Warranty Period: 30 Months After The Dat E Of Delivery ] ] , Aspiration Main Pipe-21.2 Mm, Part No. Jk-Fsd-1102 [ Warranty Period: 30 Months Afte R The Date Of Delivery ] ] , Brake Module Card, Part No:- Jk-Fsd-1130 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Complete Aspiration Panel, Part No:- Jk-Fsd-1126 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Datalogger Card, Part No:- Jk-Fsd-1124 [ Warranty Period: 30 Months After The Date O F Delivery ] ] , Air Filter Cartridge, Jk-Fsd-1131 [ Warranty Period: 30 Months After The Date Of Deliver Y ] ] , Electrical Conduit, Part No:- Jk-Fsd-1118 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Isolating Lock Arrangment Part No:- Jk-Fsd-1158 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Air Filter To J K Exim Part No:- Jk-Fsd-1101 [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Reducer, Part No:- Jk-Fsd-1109 [ Warranty P

BRR:8431582 Supply Of Name Plates & Circuit Diagrams For Point Machine 220Mmname Plates & Circuit Diagrams For Point Machine 220Mm,Name Plates & Circuit Diagrams For Point Machine 220Mm A)As Per Drg No:Cwm/S&T/M Ft/9005 Size Qty:01 No, 150X130x0.9Mm B)As Per Drg No:Cwm/S&T/Mft/9008 Size 80X42x0.9Mm Qt Y:01 No, C)As Per Drg No:Cwm/S&T/Mft/9007 Size 85X66x0.9Mm Qty:01 No. As Per Drg.No. As Per Dr G No:Cwm/S&T/Mft/9005 Size Qty:01 No, 150 Specn: As Per Drg No:Cwm/S&T/Mft/9005 Size Qty:01 No, 150X130x0.9Mm B)As Per Drg No:Cwm/S&T/Mft/9008 Size 8. [ Warranty Period: 30 Months Aft Er The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8431241 Construction of 4 (four) nos pipe carrying structures including laying of 150mm dia M.S. distribution Pipe at Node Point 71-101 (27.50mtr), 100mm M.S. distribution Pipe at Node Point 107-111 (44.00mtr) and 80mm M.S. distribution Pipe at Node Point 302-310 (22.00mtr) & Node Point 214-215 (16.50mtr) over Nepalgaunge-Julpia canal and 2 (two) nos Culvert crossing by laying of 150mm dia M.S distribution Pipe at Node point 358-359 (11.00mtr) & Node point 358-359 (11.00mtr) for ANDHARMANIK PIPE WATER SUPPLY SCHEME to accommodate FHTC in Bishnupur-I Block under South 24-Pgns. W/S Divn.-I, PHE Dte. for Augmentation of surface water based water supply scheme in arsenic affected areas of South 24 Parganas District. [SM/18680]

BRR:8431240 Construction Of 1 (One) No Pipe Carrying Structures For Laying Of Distribution Pipeline Over Nainpur Deula Canal At Node Point 946 - 1205 For The Laying Of Distribution System At Zone-V, Magrahat-I Block

BRR:8431234 Interconnection of 2 nos. OHRs with existing 1422 mm rising main pipe for Gabberia PWSS under Bishnupur -I District.- South-24 Pgns. under South-24 Pgns W/S Divn-I, P.H.E Dte. (SM/14871)- 1 Supplying & fabricating ofdifferent diameter M.S. Pipes as per specification (IS 3589:2001) and direction of E.I.C. 2 ii) 355.6 mm dia (OD) M.S. Pipe of 10 mm thick 3 iii) 219.1 mm dia (OD) M.S. Pipe of 6.3 mm thick 4 Supply and delivery of MS Machine End to be delivered at site inclusive of all duties, taxes, charges and cost of transportation, loading & unloading and stacking all complete and lifting at destination point all complete as per the direction of EIC. 5 ii) 200 mm dia (16 mm thick in DI end 10mm in M.S.) 6 Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. (Payment to be made on area of cut surface) 7 Welding in M.S. structural work with gas or electric:(a) Continuous weld. 8 Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. 9 In ground floor including roof. 10 (a) upto 150 mm. thick 11 Hire charges of moveable crane (capacity 10MT) including operator, helper, fuel, lubricants etc. for loading/ unloading/ placing of various materials / accessories of water supply works as per direction of E.I.C.(For 8 Hrs of working per day) 12 Sand blasting to Mild Steel surface with coarse sand fillowed by immediate application of two coats of ZincRich Epoxy Primer of approved make and brand and subsequent painting two coats with Coal Tar Epoxy of approved make and brand including cost of materials, labours, machinery, fuel and power including carriage of the steel materials at site complete. [Brand of primer and paint shall be approved by the Engineer-in-charge] 13 Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R- 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilled to IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2.N.B: The above item should be procured from the reputed manufactures as per deptt. approved vender list 14 a) Size - 200 mm dia. 15 Hire and labour charges for shoring work (including necessary close plank walling, Framing, Eucalyptus/Jhou Bulla piling, Strutting etc.) complete as per direction of the Engineer-in Charge For foundation excavation.(vertical surface area in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Engineer-in-Charge.) 16 a) Depthup to 1.5m below G.L. 17 Ordinary Cement Concrete (mix 3:1.5:1) with graded stone chips (20mm down) excluding shuttering and reinforcement. If any, in ground floor, as per IS 456-2000. 18 a) Pakur Variety 19 (Lead average 17 km from Baruipur railway yard to work site) 20 Filling in foundation or plinth by Silver Sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. 21 Add GST @ 18% on all item except item no. 1,2 & 6 22 Add CESS @ 1% on all items except item no. 1,2 & 6 and on GST

BRR:8431134 Supply Of Multipurpose 500 Mlmultipurpose 500 Ml,Multipurpose 500 Ml Aerosol Spray Can For Corrosion Prevention And Lubricates/Loosens Seized Rusted Mechanisms. Technical Specification: Appearance: Liquid ; Colour: Amber ; Odour: Salicylate Density: 0.82 Gm/Cc ; Flash Point: 70 Deg C Density Active Product: 0.8 8 Gm/Cc Dynamic Viscosity Active Product: 25 Mpa-S Make: Crc/Epigen/Cyclo/Molygraph Or Similar. [ Warranty Period: 30 Months After Th E Date Of Delivery ] ]

BRR:8430950 Supply Of Hand Tool Kit Boxhand Tool Kit Box,Hand Tool Kit Box, Box Contains - 1. Chrome Vanadium Plated 12 Pcs 45 Deg. Ring Spanner Set - 6 To 32 Mm 2. Chrome Vanadium 12 Pcs Doubl E Open End Spanner Set - 6 To 32 Mm 3. 1/2 Drive Socket Set - 25 Pcs ? Sockets 6 Point : 8 To 32 Mm ? Sockets 12 Point : 2 Pcs. 16,21 Mm ? Ratchet : 1 Pc. ? Extension Bars : 2 Pcs. 5, 10 ? Universal Joint : 1 Pc. ? Sliding Adaptor : 1 Pc. 4. Gedore T Type Allen Key Set - 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8, 10 Mm & 3/16 5. Sta Nley Plastic Tool Box 19 -49 Cm Tool Box - 485X270x237 Mm [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8430374 Supply Of Supply, Commissioning, Erection And Testing Of Nvr Spare Parts Consisting Of A) Resistors And Capacitors For Ics- Each 1 No. B) Mosfets -2 Nos C) 120Gb Memory Chip- 1No. D) Spares To Mother Board- Micro Controller Ics, Transistors,- Each 01 No. For Mother Board. Make : Hikvision, Or Similar,, The Supplied Item Should Be Completely Compatible And Suitable To Hikvision Make Nvr And Model No Ds-M7508hni/Gw/M12.Supply, Commissioning, Erection And Testing Of Nvr Spare Parts Consisting Of A) Resistors And Capacitors For Ics- Each 1 No. B) Mosfets -2 Nos C) 120Gb Memory Chip- 1No. D) Spares To Mother Board- Micro Controller Ics, Transistors,- Each 01 No. For Mother Board. Make : Hikvision, Or Similar,, The Supplied Item Should Be Completely Compatible And Suitable To Hikvision Make Nvr And Model No Ds-M7508hni/Gw/M12.,Supply, Commissioning, Erection And Testing Of Nvr Spare Parts Consisting Of A) Resistors An D Capacitors For Ics- Each 1 No. B) Mosfets -2 Nos C) 120Gb Memory Chip- 1No. D) Spares To Mother Board- Micro Controller Ics, Transistors,- Each 01 No. For Mother Board. Make : Hikvision, Or Similar,, The Supplied It Em Should Be Completely Compatible And Suitable To Hikvision Make Nvr And Model No Ds-M7508hni/Gw/ M12. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8430131 Tender for Construction Of cement concrete Road From House Of Bidyut Nandi To Dashghara Pitch Point