|
tender for improvement of electrical installations in ayushman arogya mandir at maternity home madipur in ward 93 under west zone mcd.; 1 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c 2 supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.40 a 3 supplying and fixing following rating, double pole, 240 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 a 4 providing and fixing of following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 a, 16 ka, tpmccb 5 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 8 way 6 supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85% ,operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% , p. f.≥0.95, ip20, cri >80 , flickerfree (flicker should be below 5 %), life time (led,driver & electrical circuitry), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends, cct 3000°k / 4000°k / 5700°k /6000°k/ 6500°k (as per ansi bin), sdcm (standard deviation color matching) <3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oemwarranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineerin-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90°c). powder coated die cast /extruded aluminum body (thickness ≥ 1.20 mm)18- 22 watt 7 supply, installation, testing and commissioning of ceiling fan with brushless direct current (bldc) motor, class of insulation: b, 3 nos. metal( aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit,safety rope, copper winding, steel/al body power factor not less than 0.9,service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is :374-2019), thd (total harmonic distortion) less than 10%, suitable foroperation with regulator for speed control and all remaining accessoriesincluding safety pin, nut bolts, washers, temperature rise=75 degree c(max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac ceiling fan compliant to is 374:2019 fan supply,earthing etc. complete as req. 1200mm, service value ≥ 6.0 cm/min/watt, air delivery 210 cm/min(minimum). 8 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 9 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 10 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire 11 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire 12 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.4 x 4 sq. mm + 2 x 4 sq. mm earth wire 13 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 6 sq. mm + 1 x 6 sq. mm earth wire 14 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm 15 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle) 16 supply ofxlpe insulated, pvc sheathed al. conductor armoured cable 1.1 kvgrade conforming to is 7098of following sizes. 2x10 sq mm 17 supply ofxlpe insulated, pvc sheathed al. conductor armoured cable 1.1 kvgrade conforming to is 7098of following sizes. 4*25 sq mm 18 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. 19 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. 20 supply , installation, testing and commissioning of air cooled hi wall splittype air conditioners complete with indoor unit(idu), out door unit (odu),surface / concealed copper refrigerant piping with insulation (closed cellelastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu),copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r407 green refrigerant, wireless remote control, suitable for workingbetween 180-260v with low & high voltage cutoff and 50 hz ,1 phase acsupply capable of performing cooling, dehumidification, air circulation offollowing capacity with scroll / rotary compressor. the system shall be ableto deliver 100% of the rated capacity upto 42 degree celsius. min 5 yearoriginal equipment manufacturer (oem) warranty both compressor andprinted circuit board (pcb). must comply : electrical cable is 694 or is9968 temperature sensing control is /international electro technicalcommission (iec) 60730, hermetic compressor is 10617, heat exchangeris 11329, capacitor is 2993 and motor is 12615. complete as per cpwdspecification and is : 1391 part ii 2023. the system shall be able to operateup to 50 0c (out door ambient temperature). inverter type - cooling only. 1.0 tr with 5 star bee rating 21 supply , installation, testing and commissioning of air cooled hi wall splittype air conditioners complete with indoor unit(idu), out door unit (odu),surface / concealed copper refrigerant piping with insulation (closed cellelastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu),copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r407 green refrigerant, wireless remote control, suitable for workingbetween 180-260v with low & high voltage cutoff and 50 hz ,1 phase acsupply capable of performing cooling, dehumidification, air circulation offollowing capacity with scroll / rotary compressor. the system shall be ableto deliver 100% of the rated capacity upto 42 degree celsius. min 5 yearoriginal equipment manufacturer (oem) warranty both compressor andprinted circuit board (pcb). must comply : electrical cable is 694 or is9968 temperature sensing control is /international electro technicalcommission (iec) 60730, hermetic compressor is 10617, heat exchangeris 11329, capacitor is 2993 and motor is 12615. complete as per cpwdspecification and is : 1391 part ii 2023. the system shall be able to operateup to 50 0c (out door ambient temperature). inverter type - cooling only. 1.5 tr with 5 star bee rating 22 s/i/t/c of stand for split ac 23 s/i/t/c of copper pipe for split ac 24 s/i/t/c of drain pipe for split ac 25 s/i/t/c of 3 core, 4 sqmm electrical wire for air conditioner 26 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 27 supplying and fixing extra conduit down rod of 20 cm length g.i. pipe 15 mm dia, heavy gauge including painting etc. as required. (note : more than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) 28 providing and fixing circular/ hexagonal cast iron or m.s. sheet box forceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5mm thick m.s. sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/ m.s. sheet box by means of3.3 mm dia round headed screws, one lock at the corners. clamp shallbe made of 12 mm dia m.s. bar bent to shape as per standard drawing.
|