|
| 1 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work (235.15x0.973x1.03)=235.66 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(54.65X0.973x1.03)=54.77 |
| 3 | 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand) (347.05x0973x1.03)=347.81 |
| 4 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (1439.40x0973x1.03)=1442.55 |
| 5 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1 :2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone (1526.05x0.973x1.03)=1529.39 |
| 6 | Extra for fixing sand stone in vertical face of wall or risers using over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1 :2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone |
| 7 | Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (191.40x0.973*1.03)= 9916.87 |
| 8 | Extra for pre finished nosing in sand stone slab. |
| 9 | Providing, installing and commissioning of Kirloskar, crompton or equivalent make electrically driven 3 HP, 3-phase mud pump having a discharge capacity of 18,000–22,000 litres per hour (300–360 LPM) and suitable for a total head of 12–18 metres, including 9 metres of 65mm diameter rigid suction pipe with foot valve/strainer, 30 metres of 75mm diameter cotton delivery pipe, required couplings, and a suitable starter/control panel for safe operation; complete for dredging and removal of accumulated silt/sludge from the bottom of the Butterfly Pond, as per direction of Engineer-in-Charge.” |
| 10 | Supplying, installation and commissioning of watertech systems or equivalent make FRP bobbin-wound Pond filter of 525 mm diameter, complete with graded sand media and top-mount multiport valve, having a maximum flow rate of 12,000 litres per hour, mounted on heavy-duty trolley, including supplying and fixing 1.5 HP swimming pool circulation pump of 20,000 LPH capacity with required fittings, unions, valves, piping connections and accessories, complete as required and as directed by the Engineer-in-Charge |
| 11 | Supplying, installing, testing and commissioning of Yash, Cleantek or equivalent make Double Stage Ring Blower of 2 HP, single-phase, suitable for continuous aeration of water in Butterfly Pond, complete with aluminum alloy blower housing, dynamically balanced impeller, TEFC motor (230V, 50Hz), Class-F insulation, IP55 protection, capable of delivering air flow 180–220 m³/hr with pressure up to 200–270 mbar, including inlet air filter, outlet muffler, anti-vibration mounts, necessary connectors, and all accessories required for proper aeration and air-water fusion system, complete as required and as directed by Engineer-in-Charge. |
| 12 | Supplying and laying of Polycab, Havells or equivalent make 4 core, 6 sqmm, PVC insulated, PVC sheathed, XLPE insulated, armoured L.T. copper conductor cable 1.1 kV grade, conforming to IS: 7098 (Part-1), including laying in trench/surface/wall with clamps, making necessary connections, terminations, testing and all required accessories, complete as per direction of Engineer-in-Charge |
| 13 | Supplying and laying of 63 mm Ø HDPE (High Density Polyethylene) pipe of Berlia, Supreme or equivalent make / manufacturer, class PN-6, conforming to IS: 14333 / IS: 4984 / relevant standard, including fusion / jointing by butt-welding or electrofusion hydrostatic testing, providing bends, tees, couplers and all necessary accessories, complete as per direction of Engineer-in-Charge. |
| 14 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.(215.60x0973x1.03)=216.07 Please Enable Macros to View BoQ information |
