|
| 1 | Block repair and painting of steel pontoon S.P-X(30m x 8m x 2m) |
| 2 | Pontoon to be blocked and unblocked. |
| 3 | Ultrasonic gauging to be done on Bottom, Side hull, Deck, Transom plate. |
| 4 | Renewal of Fairleads including doubler plate. |
| 5 | Renewal of twin bollards including doubler plate. |
| 6 | Renewal of single bollards. |
| 7 | Fabrication and fitment of steel blister fender from 200NB half cut pipe stiffened with ‘D’ shaped stiffener 500mm apart alongwith dressing of damaged wooden fender cleats. |
| 8 | Damaged Steel plate to be renewed.Side hull- 60m x0.5m x8mm-1.884 MT.40% of Deck plate-6.028- MT.50% of bottom plate-7.536 MT. Rubbing plate-3.5MTInside frame work and Bkt.-1.3MT Air vent pipe-0.113MT. |
| 9 | Chipping, scrapping & cleaning external and internal surfaces |
| 10 | External hull including deck fittings of the pontoon to be painted by1 coats of Epoxy Primer and 1 coats ofblack paint |
| 11 | Interior surface including BHDs’ and structural members to be painted by 1 coats of Epoxy Primer |
| 12 | Block repair and painting of steel pontoon S.P-XI (30m x 9m x 1.5m) |
| 13 | Pontoon to be blocked and unblocked. |
| 14 | Ultrasonic gauging to be done on Bottom, Side hull, Deck, Transom plate. |
| 15 | Renewal of Fairleads including doubler plate. |
| 16 | Renewal of twin bollards including doubler plate. |
| 17 | Renewal of single bollards. |
| 18 | Fabrication and fitment of steel blister fender from 200NB half cut pipe stiffened with ‘D’ shaped stiffener 500mm apart alongwith dressing of damaged wooden fender cleats. |
| 19 | Damaged Steel plate to be renewed.Side hull- 60m x0.5m x8mm-1.884 MT.40% of Deck plate-6.782- MT.50% of bottom plate-8.478 MT. ,Rubbing plate-3.815MTInside frame work and Bkt.-1.3MTAir vent pipe-0.113MT. |
| 20 | Chipping, scrapping & cleaning external and internal surfaces |
| 21 | External hull including deck fittings of the pontoon to be painted by1 coats of Epoxy Primer and 1 coats ofblack paint |
| 22 | Interior surface including BHDs’ and structural members to be painted by 1 coats of Epoxy Primer |
| 23 | Block repair and painting of of steel pontoon S.P-XII(30m x 10m x 2m) |
| 24 | Pontoon to be blocked and unblocked. |
| 25 | Ultrasonic gauging to be done on Bottom, Side hull, Deck, Transom plate. |
| 26 | Renewal of Fairleads including doubler plate. |
| 27 | Renewal of twin bollards including doubler plate. |
| 28 | Renewal of single bollards. |
| 29 | Fabrication and fitment of steel blister fender from 200NB half cut pipe stiffened with ‘D’ shaped stiffener 500mm apart alongwith dressing of damaged wooden fender cleats. |
| 30 | Damaged Steel plate to be renewed.Side hull- 60m x 1m x8mm-3.768 MT.40% of Deck plate-7.536- MT.50% of bottom plate-9.420 MT.Rubbing plate-5.652MTInside frame work and Bkt.-3MTAir vent pipe-0.113MT. |
| 31 | Chipping, scrapping & cleaning external and internal surfaces |
| 32 | External hull including deck fittings of the pontoon to be painted by1 coats of Epoxy Primer and 1 coats ofblack paint |
| 33 | Interior surface including BHDs’ and structural members to be painted by 1 coats of Epoxy Primer |
| 34 | Block repair and painting of of steel pontoon S.P-XIII (30m x 9m x 1.5m) |
| 35 | Pontoon to be blocked and unblocked. |
| 36 | Ultrasonic gauging to be done on Bottom, Side hull, Deck, Transom plate. |
| 37 | Renewal of Fairleads including doubler plate. |
| 38 | Renewal of twin bollards including doubler plate. |
| 39 | Renewal of single bollards. |
| 40 | Fabrication and fitment of steel blister fender from 200NB half cut pipe stiffened with ‘D’ shaped stiffener 500mm apart alongwith dressing of damaged wooden fender cleats. |
| 41 | Damaged Steel plate to be renewed.Side hull- 60m x0.5m x8mm-1.884 MT.30% of Deck plate-5.086- MT.40% of bottom plate-6.782 MT. ,Rubbing plate-3.815MTInside frame work and Bkt.-1.3MTAir vent pipe-0.113MT. |
| 42 | Chipping, scrapping & cleaning external and internal surfaces |
| 43 | External hull including deck fittings of the pontoon to be painted by1 coats of Epoxy Primer and 1 coats ofblack paint |
| 44 | Interior surface including BHDs’ and structural members to be painted by 1 coats of Epoxy Primer |
| 45 | Block repair and painting of of of steel pontoon P35 (30m x 9m x 1.5m) |
| 46 | Pontoon to be blocked and unblocked. |
| 47 | Ultrasonic gauging to be done on Bottom, Side hull, Deck, Transom plate. |
| 48 | Renewal of Fairleads including doubler plate. |
| 49 | Renewal of twin bollards including doubler plate. |
| 50 | Renewal of single bollards. |
| 51 | Fabrication and fitment of steel blister fender from 200NB half cut pipe stiffened with ‘D’ shaped stiffener 500mm apart alongwith dressing of damaged wooden fender cleats. |
| 52 | Damaged Steel plate to be renewed.Side hull- 50% of side hull plate-2.826MT.50% of Deck plate-8.478- MT.50% of bottom plate-8.478 MT. ,Rubbing plate-3.815MTInside frame work and Bkt.-1.3MTAir vent pipe-0.113MT. |
| 53 | Chipping, scrapping & cleaning external and internal surfaces |
| 54 | External hull including deck fittings of the pontoon to be painted by1 coats of Epoxy Primer and 1 coats ofblack paint |
| 55 | Interior surface including BHDs’ and structural members to be painted by 1 coats of Epoxy Primer |
| 56 | Block repair and painting of of of steel pontoon S.P-XIV (30m x 9m x 1.5m) |
| 57 | Pontoon to be blocked and unblocked. |
| 58 | Ultrasonic gauging to be done on Bottom, Side hull, Deck, Transom plate. |
| 59 | Renewal of Fairleads including doubler plate. |
| 60 | Renewal of twin bollards including doubler plate. |
| 61 | Renewal of single bollards. |
| 62 | Fabrication and fitment of steel blister fender from 200NB half cut pipe stiffened with ‘D’ shaped stiffener 500mm apart alongwith dressing of damaged wooden fender cleats. |
| 63 | Damaged Steel plate to be renewed.Side hull- 60m x1.5m x8mm-5.652 MT.50% of Deck plate-8.478MT.40% of bottom plate-6.782 MT. ,Rubbing plate-3.815MTInside frame work and Bkt.-1.3MTAir vent pipe-0.113MT. |
| 64 | Chipping, scrapping & cleaning external and internal surfaces |
| 65 | External hull including deck fittings of the pontoon to be painted by1 coats of Epoxy Primer and 1 coats ofblack paint |
| 66 | Interior surface including BHDs’ and structural members to be painted by 1 coats of Epoxy Primer |
