Civil Works For Residence No Se-V Of Superintending Engineer, Etc-Ii Panki, Kanpur. ( P.R. No. 1300042151 ) Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand And Cement In Proportion Of 3:1.5:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work ( Csi No. 5.21 ) 2 First Class Brick Work In 1:4 Cement And Coarse Sand Mortar In Super Structure For Walls Of 1 / 2 Brick ( 115 Mm ) Thickness Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work ( Csi No. 6.03+6.07+6.09 ) 3 S / F Galvanized Mosquitos Proof Heavy Quality Iron Wire Gauge ( 14X24 ) Over Window Frames And Including Supply Of Country Woodbattens 8Cm X 1Cm. And Including Supply And Fixing Of Necessary Screws, All Materials, Labour Andt&P Etc. Required For Proper Complete. ( Csi No. 8.45 ) 4 Supply And Fixing Of 32 Mm Thick Single Leaf Flush Door Shutter ( Boiled Water Resistance, Phenol Maldehide Resin Bonded, Hot Pressed Factory Made ) Commercial Quality To I.S.2202 Part-1 ( 1983 ) Isi Marked Including Fixing Of Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Hinges, Bolts.Locks, Handles, Springs And Other Fittings But Excluding Their Supply Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.54 ) 5 Supply And Fixing Anodized Aluminium Door Fittings Like 2 No 150 Mm Handles, 2 No 250 Mm Tower Bolt, 1 No Stopper And 1 No 12 Mm Belan Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.58 ) 6 Supply And Fixing Anodized Aluminium Window Fittings Like 2 No 100 Mm Handles, 2 No 150 Mm Tower Bolt, 1 No Stopper Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.59 ) 7 Supplying & Fixing 24 Gauge Annodized Aluminium Sheet Of Approved Quality Including Cutting, Wastage And Fixing The Same Over The Wooden Door Shutters With Nails With All Material, Labour And T&P. ( Csi No. 8.60 ) 8 Tmt / Tor Steel In Plain Work Such As Reinforced Concrete Orreinforced Brick Work ( When Not Included In An Over All Rates ) Wrought To Required Shape As Necessary Including Bending Forproper Completion Of The Work And Including Supply Of Steel Its Wastage, Bend, Hooks And Authorized Overlapping Shall Be Measured. ( Steel Shall Be Arranged By The Contractor ) ( Csi No. 9.03 ) 9 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Three Part Of Coarse Sand ( 1:3 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Materiallabour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.06 ) 10 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Six Part Of Coarse Sand ( 1:6 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.09 ) 11 S / Mixing Approved Water Proofing Compound ( Cico, Dr Fixit Etc ) In Cementmortar In Plaster Or Concrete Work In The Proportion As Recommended By The Manufacturer. ( Csi No. 11.15 ) 12 3 Mm Thick Floating Coat Of Neat Cement Finish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Cement Consumption 0.044 Bag / Sq.M. ( Csi No. 11.20 ) 13 Supply And Laying 6 Mm Thickglazed Tiles In Skirting / Dado Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry, Jointing And Polishing Complete, Including Supplyof All Materials, Labour And T&P Etc. Completion Required For Proper Completion Of The Work. ( Csi No. 12.12 ) 14 Providing And Laying Floor Of 8 Mm Thick Vitrifiedtiles In Flooring Or Skirting Of Approved Brand ( Bell, Johnson Or Equi. Make ) Size Of 600X600 Mmof Approved Shade, Colour And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cementmixed With Pigment To Match The Shade Of Tile Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work. ( Csi No. 12.18 ) 15 Painting Or Varnishing New Iron Work In Small Areas Or New Woodwork With One Coat Of Ready Mixed Priming Paint And One Coat Ofapproved Superior Quality Ready Mix Paint Luxol Or Equivalentbrand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. ( Csi No. 13.01 ) 16 Painting Or Varnishingiron Work In Small Areas Or Woodwork With Every Coat After First Coat Of Ready Mixedprimingpaintandonecoatof ApprovedsuperiorqualityreadymixpaintLuxolOr Equivalent Brandorvarnishincludingsupply Ofallmaterials, Labourandt&Petc.Requiredfor Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. ( Csi No. 13.02 ) 17 Painting Or Varnishingwith One Coat Of Ready Mixedprimingpaintandonecoatof ApprovedsuperiorqualityreadymixpaintLuxolOr Equivalent Brandorvarnish On Previously Paintedold Wood Or Iron Work Including Itssandpapering, Rubbingand Cleaningasrequired, Forpropercompletionofwork. ( Csino. 13.03 ) 18 Applying Birla Or Equivalent Putty On New Interior Or Exterior Surface Over One Coat Of Water Based Cement Primer Of Ici Or Equivalent Brand For Smoothening And Levelling Of The Surface As Perrequirementanddirectionofengineeri / Cincludingcostofallmaterial, Labour, T&P Etc Required For Proper Completion Of Work. ( Csi No. 13.20 ) 19 Applying Birla Putty Or Equivalent Putty On Previousaly Bila Putty Smoothen Surface Over One Cost Of Water Base Cement Primer Of Ici Or Equivalent Brand For Smoothining And Leveling Of The Surface As Per Requirement And Direction Of E / I Including Cost Of All Material , Labour And T&P Required For Proper Completion Of Work. ( Csi No.13.21 ) 20 Painting One Coat With Apex Or Equivalent Brand Weather Coat Paint On New Wall Surfaces ( Wellpreparedwithbirlaputtyandonecoatofprimericiorequivalentwhichshallbepaid Separately ) Includingthroughwashingwithwaterincludingcostofallmaterials, Labour, T&P Required For Proper Completion Of Work. ( Csi No. 13.22 ) 21 Paintingforeverycoatofadditional Apex Or Equivalent Brand Weather Coat Paint On Previously Treated Surface Includingthroughwashingwithwaterincludingcostofallmaterials, Labour, T&P Required For Proper Completion Of Work. ( Csi No. 13.23 ) 22 Painting One Coat With Apex Or Equivalent Brand Weather Coat Paint On Previously Treated Surface Includingthroughwashingwithwaterincludingcostofallmaterials, Labour, T&P Required For Proper Completion Of Work. ( Csi No. 13.24 ) 23 Painting One Coat With Acrylic Emulsion Paint Of Berger / Asian / Ici Or Equivalent Paint ( Paint And Water In The Ratio 1:1 By Volume ) Over Prepared And Primed Surface Of Cement Concrete, Cement Plaster And Bricks Including All Labour, Material And T&P Etc Required For Proper Completion Of The Work, ( Preparation Of Base With Birla Putty Etc. And A Coating Of Primer Shall Be Paid Extra ) . ( Csi No. 13.25 ) 24 Painting Every Coat After First Coat With Acrylic Emulsion Paint Of Berger / Asian / Ici Or Equivalent Paint ( Paint And Water In The Ratio 1:1 By Volume ) . ( Csi No. 13.26 ) 25 Painting One Coat With Acrylic Emulsion Paint Of Berger / Asian / Ici Or Equivalent Paint ( Paint And Water In The Ratio 1:1 By Volume ) Over Previously Painted Surface Including All Labour, Material And T&P Etc Required For Proper Completion Of The Work, ( Preparation Of Base With Birla Putty Etc. And A Coating Of Primer Shall Be Paid Extra ) . ( Csi No. 13.27 ) 26 Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar Andincluding Stacking Of Materials As Directed By Theengineer-In-Charge Within A Distance Of 60 Metres. ( Csi No. 15.01 ) 27 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.11 ) 28 Scrapping Old White Or Colour Wash Or Distemper Including Disposal Of Refuseas Directed By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.12 ) 29 Dismantling Of Existing Damaged Mud Faska Over The Roof. Cleaning The Surface With Wire Brush, Removal And Disposal Of Rubbish At Adistace 100 Meters Also Including The Cost Of Cleaning And Stacking Of Usable Materials Etc., Including All Labour, Material Required For Proper Completion Of Work. ( Csi No. 15.14 ) 30 Cleaning Of Inspection Chamber Including Disposal Of Waste Out Side The Uppcl Area As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 20.13 ) 31 Disposal Of Rubbish / Debris Out Side The Uppcl Area As Per Direction Of Er / In- Charge Including Cartage, Labour And Materials, T&P Etc. Required For Proper Completion Of The Work. ( No. Deduction For Voids Shall Be Made ) . ( Csi No. 20.16 ) 32 Supply And Replacing Of Chromium Polished Iron Fittings Tower Bolts 10 Mm Dia X 250 Mm Long Including Cost Of Nuts, Bolts Etc.Complete. ( Csi No 20.17 ) B 33 Supply And Replacing Of Chromium Polished Iron Fittings Iron Hinges 100 Mm Size.12 Gauge.Thick Including Cost Of Nuts, Bolts Etc.Complete. ( Csi No 20.17 ) D 34 Supply And Replacing Of Chromium Polished Iron Fittings M.S.Handles 100 Mm Size Including Cost Of Nuts, Bolts Etc.Complete. ( Csi No 20.17 ) F 35 Supply And Replacing Of Chromium Polished Iron Fittings L-Drop 16 Mm Dia X 200 Mm Long Including Cost Of Nuts, Bolts Etc.Complete. ( Csi No 20.17 ) H 36 Providing And Fixing Pvc Ball Float Valve 15 Mm Dia. With Brass & Union Complete, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.06 ) A 37 Providing And Fixing Pvc Connection Pipe, 300X15 With 2 Brass Units Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.09 ) A 38 Supply And Fixing Of Syntex Or Equivalent Make Water Storage Tank Including All Materials, Labours, T&P Etc Required For Proper Completion Of Work. ( Csi No. 26.12 ) 39 Providing And Fixing Cp Brass Bib Cock15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.16 ) A 40 Providing And Fixing Cp Brass Shower15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.16 ) E 41 Providing And Fixing Cp Brass Angle Valve15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.16 ) I 42 Providing And Fixing Cp Brass Pillar Cock15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.16 ) J 43 Providing And Fixing Of 110 Mm Dia Pvc Pipe 4 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work. ( Csi No. 26.18 ) 44 Providing And Fixing 15 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.19 ) 45 Providing And Fixing 20 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.20 ) 46 Providing And Fixing Plastic Seat Covercomplete With Plastic Lid For European Type Wc Isi Markedincluding Supply Of All Materials, Labour And T&P Etc.Complete. ( Csi No. 27.04 ) 47 Providing And Fixing 10 Litres Low Level Pvc Flushing Cistern, Complete With All Fittings Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.12 ) 48 Providing And Fixing In Position 32 Mm. Dia P.V.C.Waste Pipe For Wash Basin. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.14 ) 49 Providing And Fixing 600 Mm X 450 Mm Beveled Edge Mirror Of Atul, Kiran Makeglass With Indian Polish 6.50 Mm Thick Complete With Back Of 600 Mm X 450 Mm X 6 Mm Hard Board Sheet Fixed To Wooden Cieats With C.P. Brass Screws And Washers Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.15 ) 50 Providing And Fixing Ci Grating 100 Mm Dia Includingall Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.25 ) 51 Providing And Fixing Stainless Steel Sink 610X450x200 Mm Heavy Quality ( Isi Marked ) Includingall Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.26 )
