Various Civil Works At Central Hospital Kitchen By Way Of Repair / Renovation And Construction Of Gas Bank At Skims Var Earthwork in excavation by hydraulic means over areas exceeding 30 cm upto 1.5mtr in depth, 1.5 m in width as well as 10 sqm on plan including backfilling of soil & disposal of soil I/c carriage of 80% material by M.T Within 2km lead 2 Supply, stacking and laying ofstone soling hand packed on level incl ramming with heavy rammers incl. all carriage upto site of work 3 Removal of kota stone kota stone including stacking of unseviceable material and disposal upto 50 metrrs lead 4 Demolishing of cement concrete by manual/ mechanical means (1:3:6) mix or richer including its disposal as directed by site engineer. 5 P/L in position cement concretein foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1:4:8)stone aggregate 40 mm n/s including all carriage. 6 P/L in position cement concrete of specified grade (1:3:6 ) stone aggregate 20mm nominal size aggregate excluding the cost of shuttering and centering finishing and reinforcement all work upto plinth level including all carriage. 7 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 20-25 mm 8 Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. 9 Centering and shuttering including strutting, propping etc. and removal of form work for : 10 Foundations, footings, bases of columns. Etc. 11 Suspended floors, roofs, landings, balconies and access platform. 12 P/L in position reinforced cement concrete of specified grade excluding the cost of shuttering and centering finishing and reinforcement all work upto plinth level 1:2:4 Mix stone aggregate 20 mm n/s including all carriage. 13 Reinforcement for RCC works incld. straightening bending cutting placing in position and binding all complete (TMT Bars) 14 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 15 Structural steel work in built up sections, (hollow tubes ), including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 16 P/F of fibre iron mesh grill of 20*20 mm size with 3 mm thickness fixed with MS iron grill complete in every respect including primer 17 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in supertructure upto floor 5-level. ( Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages. 18 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick 19 Dismantling of Tile i/c disposal of unserviceable material within 50 metres lead 20 Dismantling of Old Plaster or skirting/ mosaic surface etci/c disposal of unserviceable material within 50 metres lead I/c cleaning of the surface 21 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 22 P/L of glazed ceramic floor tiles size 300*300 mm of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge,incement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 23 P/L of 15mm thick cement plasterof mix 1:4(1cement:4fine sand) including all carriage. 24 P/A white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. 25 Applying priming coats with water thinable cement primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 26 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 27 Demolishingof granite stoneslab including stacking unserviceble material and its disposal 28 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels( 18mm thick granite) 29 Painting on steel work metallic paint(silver) two or more coats including primer coat. 30 Painting with Epoxy paint of approved brand and manufacture on steel work two or more coats including primary coat. 31 Engagement of labour/Plumber/Welder/Carpenter (for removing of rubbish etc. and refixing of bathroom fittings repairs existing trash drains/window) 32 Labour 33 Plumber 34 Welder 35 Carpenter 36 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm thick . (1st class Kail wood) 37 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 1st class kail wood30mm thick 38 Applying priming coats with wood /pink primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 39 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (two or more coats) 40 Providing and fixing of following hardware fittings of approved quality and manufacture. 41 Tower Bolt 100 mm 42 Handle 100 mm 43 Imex Hinges 75mm 44 Handle 150 mm 45 Hinges 75mm 46 Tower Bolt 150 mm 47 Providing and fixing G.I pipes including G.I fittings and clamps including cutting and making good the walls. 48 15 mm Nominal bore 49 20mm nominal bore 50 Providing and fixing of following sanitary fiitings and Installations of approved make like, Jaquar / Parko complete. 51 CP Angle Value 52 PVC Connection 53 Mirror superior Quality (1*1.5) 54 CP Soap case 55 CP Grating 56 Ball Value 15mm Heavy type 57 Ball Value 20mm Heavy type 58 G.I Union 15mm 59 G.I Union 20mm 60 C. P Bend 61 Cistern 10 ltr. 62 Corner shelf 63 CP Wall Mixer/Basin mixer 64 C. P Towel rod 65 Wall hanger 66 Toilet seat cover 67 Dismantling CI pipes excluding excavation and refilling of trenchesaafter taking out the pipes mechanically and manual means by breajking lead caulkedjoints, melting of lead and melting into blocks including stacking of pipes and lead at site within 50 metrs (upto 150mm dia) 68 P/F of Cast iron pipes and its fittings 69 4 P Trap 70 4Plain Bend 71 4Door bend 72 4Collar 73 4 pipe 74 3 P Trap 75 3 Plain Bend 76 3Door bend 77 3 Collar 78 3 pipe 79 2 pipe 80 3 2 Reducer 81 2 Cowel 82 Extra cost for lead caulker joints 83 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 finesand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. 84 Dismantling indian W.c 85 P/F of Indian WC (Orissa type) of size 580*440mm including integrated foot rest. 86 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 87 P/F Aluminium work for doors windows, ventilators and partitions with extruded built up sections of approved make conforming to IS: 733 ans IS: 128, fixed with dashed fasteners of required dia and size including necessary filling up of gaps at junctions and required EPDM rubber/ neoprene gasket felt etc. 88 powder coated aluminum for frames. 89 For powder coated aluminium forshutters, doors,windows etc 90 P/F of A.C.P in partition, shutters frames etc including cost of rubber, neoprene gasket . Complete job 3 mm thick 91 P/F of glazing(transparent/transleucent)in aluminum door,window,ventilator shutters and partitions etc.with EPDM rubber and neoprene gasket 5 mm thick. 92 Aluminium hardware fittings 93 Powder coated Aluminium handle 75mm 94 Powdwer coated Aluminium hinges 75mm 95 Powdwer coated Tower bolt 100 mm 96 Mortice lock
