Supply Of Furniture Articles In 2 Mtn Div Sector, Dinjan State Assam-Assam

Supply Of Furniture Articles In 2 Mtn Div Sector , For : Dinjan ( Assam ) , Single Sleeping Bunk . ( A ) Prefabricated Ms Rectangular / Square Tube Shall Comply With Is-4923:1997 Specification Hollow Section Single Sleeping Bunk Of Size As Shown In Drawing And Technical Specification In Schedule-I ( A ) . Bunks Should Be Suitable For Fixing 1 . 85M X 0 . 92M X 12Mm Thick Plywood Sleeping Surface For One Person And To Be Painted With Two Coat Of Red Oxide And Two Coats Of Silver Grey Paint At Factory Or On Site After Assembling . The Sleeping Platform Should Be Detachable And All Joints And Framework Should Be As Shown In The Drawing And Painted With Two Coats Of Enamel Paint Colour As Specified By The Consignee Over A Coat Of Anticorrosive Primer Applied Through Spray Painting . ( B ) 01 X Coir Mattress Of Size 1 . 83M X 0 . 9M X 75Mm Thick Comprising Of 50Mm Thick High Density Coir With Hessian Border Pasted With 25Mm Thick High Density Foam ( Pasting To Be Done With Dendrite Adhesive ) . Mattress To Be Stitched With Good Quality Og Cotton Fabric Or As Colour Approved By Commanding Officer With Double On The Margin/Edge . Make : Sleep Well / Kurl-On/Duroflex , Bed Side Locker . Bed Side Locker Of Size 0 . 90M X 0 . 50M X 1 . 0M Made Out Of 20 Guage Cr Steel Sheet Conforming To Is 513:1994 Amdt 1&2 . The Locker Will Have 2 Compartments With 2 Separate Doors On The Front Side And A Partition On The Inner Side In The Middle Dividing The Width Of The Locker Into 2 Equal Parts . Left Compartment Will Have Two Shelves Placed Horizontally At Equal Distance And Right Compartment Will Have One 20Mm Dia Steel Rod 65Mm Below Top Level For Hanger Arrangement . Vertical Reinforcement Of 800 / 400 Mm To Be Fitted Inside On Both The Doors As Well As On Right Side Of The Locker ( Hanger Side ) All As Per Drg And Specification Given In Schedule-I ( A ) . The Locker Shall Be Painted Drak Og Colour / As Indicated By Consignee . , Chair Writing Wooden . Chair Writing Of Size 535 X 470 X 890 Mm Shall Be Provided . Chair Shall Be Made Out Of Well Seasoned 1St Class Teak Wood Free From Knots . All Wooden Exposed Surfaces Shall Be Finished With To Coats Of French Polish High Gloss Finish After Preparation Of Wooden Surface . Plastic Cane Seat Of Size 470 X 470 X 535 With Arm Rest Of Size 60 X 25 Mm Shall Be Provided . The Legs Will Be Fitted With Hard Pvc Shoe . All As Per Drg No Fd 280 Sheet 1/1 And Technical Specification Given In Shedule-I ( A ) Of Rfp . , Writing Table . Table Of Size 1145 X 610 X 760 Mm Shall Be Provided . Table Top Shall Be 19 Mm Thick Pre-Laminated Decorated Particle Board Fixed With Hollow Section Frame With Screw @ 200 Mm C/C . The Frame Work Of Table Shall Be Of Ms Hollow Section Of Size 25 X 25 Mm All As Per Drg . End Of Legs Will Be Sealed With Ms Sheet 1 . 6 Mm Thick With Proper Welding Process To Avoid The Dust Entry . 6 Mm Thick Teak Wooden Lipping Shall Be Provided On All The Exposed Edges Of Mdf Duly Treated With French Polish As Specified . All Steel Surface Will Have Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer . The Legs Will Be Fitted With Hard Pvc Shoe . All As Per Drg No Wt 1/1 And Technical Specification Given In Shedule-I ( A ) Of Rfp . , Double Sleeping Bunk . ( A ) Mild Steel Rectangular Hollow Section Shall Comply With Is-4923:1997 Specification . Rectangular Hollow Section Fitting Shall Be Clearly Finished Straight And Free From Scale , Crack , Surface , Lamination And Other Defects . Ms Rectangular Hollow Section Including Fittings Of Size As Shown In Drawing Used For Manufacture Shall Be As Per Approved Design And Drawing To Provide Adequate Strength And Life Of Double Sleeping Bunk . All As Per Drg No Fd/Map/11 Sheet 1/1 And Technical Specification Given In Shedule-I ( A ) Of Rfp . ( B ) Coir Mattress Of Size 1 . 83M X 0 . 9M X 75Mm Thick Comprising Of 50Mm Thick High Density Coir With Hessian Border Pasted With 25Mm Thick High Density Foam ( Pasting To Be Done With Dendrite Adhesive ) Mattress To Be Stitched With Good Quality Og Cotton Fabric Or As Colour Approved By Commanding Officer With Double Stitching On The Margin/Edge All As Per Sample Approved . Make: Sleep Well/Kurl-On/Duroflex/Relaxon , Bed Side Locker . Bed Side Locker Of Size 1 . 20M X 0 . 50M X 1 . 50M Made Out Of 20 Gauge Cr Steel Sheet Conforming To Is:513:1994Amdt 1& 2 . The Locker Will Have Two Compartments With Two Separate Doors On The Front Side And A Partition On The Inner Side In The Middle Dividing The Width Of The Locker Into Two Equal Parts . Each Compartment Will Have Two Shelves Placed Horizontally At Interval Of 30 Cm From Bottom And One 20Mm Dia Hander Steel Rod 65Mm Below The Top Level . All As Per Drg And Specification Given In Rfp , Almirah Steel Large . Almirah Steel Large Shall As Per Drawing Of Size 1300X485x1985mm Made Up Of 20 Mm Thick Ms Sheet . Four Number Of Shelves Shall Be Provided Equally Spaced To Make Five Compartments . One Chromium Plated Handle 150 Mm Long With 3 Way Locking Device Shall Be Provided . In Addition One Hasp And Staple Of Size 150 Mm Long Shall Be Provided For Alternative Locking Arrangements . All Steel Surfaces Internally And Externally To Be Painted With 2 Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide . All As Per Drg No Asl 1/1 & Tecnical Specification Given In Schedule-Ia Of Rfp . , Store Rack . Consists Of Four Platforms , Each Made Of Rigid Angle Iron Frame Work To Hold 4X2 , 12Mm Thick Plywood . All Four Rigid Platforms To Be Supported At Four Corners With Angle Iron Vertical Columns As Per Spacing Mentioned In Drawing No Sr-1/1 With Suitable Nut Bolts . Angle Iron Size 40Mm X 40Mm X 5Mm To Be Used . Bracing With Ms Flat Of Size 40Mm X 5Mm To Be Provided At The Rear . All As Per Drawing No Sr-1/1 And Technical Specification Given In Part-Ii Of Rfp .

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-04-2021	Corrignedum3	Date	10-04-2021
2	04-05-2021	Corrigendum10	Date	08-05-2021
3	07-05-2021	Corrigendum11	Date	15-05-2021
4	10-04-2021	Corrigendum4	Date	13-04-2021
5	13-04-2021	Corrigendum5	Date	19-04-2021
6	14-05-2021	Corrigendum12	Date	18-05-2021
7	19-04-2021	Corrigendum6	Date	22-04-2021
8	21-04-2021	Corrigendum7	Date	29-04-2021
9	24-03-2021	Corrigendum1	Date	30-03-2021
10	28-04-2021	Corrigendum8	Date	01-05-2021
11	29-03-2021	Corrigendum2	Date	03-04-2021
12	30-04-2021	Corrigendum9	Date	04-05-2021

Refer document

Refer document

Refer document