Chemical Oil and Gas, Paints and Primers, Paint Supply, Construction, Fabrication and Casting, Fabrication Work, Building Material, Plate Supply, Distribution and Conditioning, Heating Equipment, Heater, Machinery and Tools, Hardware and Fasteners, Nuts S-Andhra Pradesh

Tender For Dhds Block Ta 2019-2020 Procurement Of Cfm For Reactor Heater 60F01 - Supply Of Ceramic Module Lining Of 60-F-01 Long Description: 1. Vendor Shall Supply The New Ceramic Fiber Module (Cfm) Lining Arrangement To Suit Existing Arch Section Of Dhds Heater (60F01) Basis The Following Drawing: A. Reactor Heater Radiant Arch Ceramic Module Details ¿ Hpcl-Vr Mnt-Tpd Std-Drg Dhds Cfm 60-F- 01 Arch 01 Following Arch Section Drawings Are For Reference Only (2Nos): A. Reactor Heater Radiant Arch Plate - Vr-60-F-01-0004 (4 Of 4) B. Refractory Details Of Radiant Section - Vr-60-F-01-0018Ceramic Module Lining Shall Be 1425 Grade, 150 Thk - (25Thk Back Up + 125 Thk Module Lining) For The Entire Arch. Also Anchors And Studs To Be Used As Per Drawing. All Anchors Shall Be 100% Solution Annealed. B. Qap & Inspection Requirements: As Per Attached Qap1. For Cf Blankets & Modules Fabrication Jobs:1.1. Total Fabrication Job Shall 100% Comply With Attached Hpcl Approved Qap.1.2. Third Party Inspection Shall Be As Per Attached Hpcl Approved Qap.2. For Anchors And Other Ss Hardware:2.1. Scope Of Tpi Is As Follows:-100% Review Of Certificates For Chemical & Mechanical Properties. -Agency To Note That The Stagewise Inspection Is A Part Of The Qap And The Same Shall Be Adhered By The Agency. The Stagewise Clearance To Be Submitted To Hpcl For Review.C. Scope Of Supply:1. Material Shall Be Supplied As Per The Specifications /Dimensions In The Given Pr Lines And Deviations Are Not Acceptable. Scope Of Supply Includes The Testing Requirements Of Standards Mentioned & Qap Attached. 2. Vendor Shall Supply All Items Required To Carry Out Complete Cfm Lining Of Arch Section Viz All Type Of Cf Modules And Blankets, 0.1Mm Ss 316 Foil, Ss 316/316L Anchors, Ss 316/316L Hardware Viz Nuts, U-Pins, Sliding Bars, Casing Plate Epoxy Paints, Module Hot Face Coatings, Etc.3. Vendor To Supply 10% Extra For Modules & 20% Extra For All Other Itemsitem Specifications Etc...

Refer document

Refer document

Refer document