bids are invited for almirah large steel with shelves - dimension overall size shall be 1985mm high 920mm wide and 485mm deep description the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered mild steel sheet shall be 1mm thick the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top sides bottom and back of almirah shall be of 1mm thick mild steel sheet four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments front shutter shall two leaves of equal size front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung all joints and welding and fixing shall be done in accordance with the standard workmanship handle one chromium plated steel handle with a locking device shall be provided as shown on drawing locking device the locking device shall be three way locking device and shall also be provided with decorative key plate make of lock harrison godrej finish all steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces a mark of mes shall also be provided on top left corner of front shutter with visible colour painting shall be done with spray machine rest all as per drg , locker bed side steel - all as shown on drg overall size shall be 760mm long 600mm wide and 1100mm high all steel sheet shall be 1mm thick in front back sides top and bottom legs shall be of u shape channel 100mm high and 60mm wide ends plugged with 1mm thick mild steel sheet the legs shall be welded to bottom of locker half of locker shall have shelves and other half shall have hanging space a vertical partition shall be provided dividing the width of locker into two salves hanging portion shall have 20mm dia cp steel conduit pipe 1 point 6mm wall