bids are invited for charpoy ip hard top as per drg - overall size shall be 1980mm long 900mm wide and 440mm high two long rails and two short rails shall be of 25mmx65mmx16 guage ms rectangular pipe the legs shall be of size 32mmx32mmx16 guage welded to long and short rails as shown on drg two stiffeners of size 25mmx25mmx16 guage shall be provided in equidistant between two opposite long rails six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply two stiffeners joining legs of size 25mmx25mmx16 guage shall be provided at 150mm from ground level 12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt pvc hard rubber shoes shall be fixed at bottom of each legs all steel surfaces shall be pre treated with epoxy powder caoted oven baked with black colour rest all specifications are as per drg , locker bed side steel as per drg - overall size shall be 760mm long 600mm wide and 1100mm high all mild steel shall be 1mm thick two legs shall be provided to lockers as shown on drawing and shall be of 1mm thick mild steel sheet top sides back front and shelves shall be of mild steel sheet of 1mm thick two handles chromium plated 100mm long fixed to shutters one hasp and staple 75mm long shall be fixed to shutters the shutters shall have the locking device also the weight of the locker shall not be less than 42 kgs all steel surface internally and externally exposed to view when placed in position shall be given two coats of t grey paint of 1 grade over a coat of primer after properly smoothened the surface with sand paper and applying putty painting shall be done with spray machine rest all specifications are as per drg , almirah med steel with shelves - overall size shall be 1270mm high 765mm wide and 440mm deep the base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high mild steel sheet shall be 1mm thick for channel base the base channel shall be