bids are invited for almirah medwith shelves - almirah medwith shelves.overall size shall be 1270mm high,765mm wide and 440mm deep.the base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. mild steel sheet shall be 1mm thick for channel base. the base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.front shutters shall have two leaves.all joints and welding, fixing shall be done according standard workmanship. rest all as per drg. a steel chromium plated handle 100mm long shall be provided to the shutter.the locking device shall be three way locking device and shall also be provided with decorative key plate . all steel surfaces exposed to view when placed in position shall be paintedwith two coats of smoke grey paint internally and extrenally with spray machine after preparation of surfaces. painting shall be done with spray machine.drg no fd 10332 , bath mat - bath mat. overall size shall be 700mm long.450mm wide and 80mm high.all wood shall be of first class hard wood teak(mp).six batterns 50mmx20mm in section of teak wood equally spaced with end battens projecting 6mm on either side in 450mm width.three bases of wood support made to shape out of 65mmx25mm shall be provide as shown in drawing.battens shall be fixed to base from bottom with brase screws.all wood surfaces exposed to view when placed in position shall be painted with two coats of white enamel paint over a coat of primer after preparation of surfaces.drg no fd254,14,205 , chair easy - dichair easy. overall size shall be 510 mm long, 575mm wide and740mm high.all wood shall be first class teak (mp). front legs shall be 30mmx55mm in section and 355mm high up to seat level. rear le