bids are invited for work station chair 500x500x850mm - over all size of 500 x550 x 850 mm high having chromium plated pedestal with five coasters seat height shall be 450mm from ground seat and back shall be of 32 density hd foam 50 mm thick make century or sleep well feather foam upholstered with tapestry cloth of superior quality as approved by ge not less than rs 200 per rm all steel surfaces exposed shall be painted with two coats of black enamel paint over a coat of zinc primer with sprary machine after preparation of surfaces the armrest shall also be covered with 25mm foam cushion and best quaity tapestry cloth rexine cloth with standard workmanshiprest all as specified and shown on drawings and as directed by the ge engr in charge , almirah large steel with shelves - overall size shall be 1985mm high 920mm wide and 485mm deep the base shall be made of two numbers mild steel sheet channel bases made in u shaped with ends covered mild steel sheet shall be 1mm thick the base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high top sides bottom and back of almirah shall be of 1mm thick mild steel sheet four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartmentsfront shutter shall two leaves of equal size front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung all joints and welding and fixing shall be done in accordance with the standard workmanshipone chromium plated steel handle with a locking device shall be provided as shown on drawing the locking device shall be three way locking device and shall also be provided with decorative key plate make of lock harrison godrejall steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfacesa mark of mes shall also be provided