tender for dismantling brick work and clearing of debris to a place of atleast 1km away from the site as directed by engineer in charge including cost of all materials, labour charges, t&ps, lead, lift, etc., complete. , brick work in cm 1:4 using fly ash bricks as directed by the engineer in charge including cost of all materials, labour charges, curing, lead, lift, t&p, etc., complete. , plastering in c.m 1:5, 12mm thick for wall surfaces including cost of all materials, labour charges, curing, t&p, lead, lift, etc., complete. , providing two coats of oil bound distember of approved quality and colour over one coat of primer to the wall surfaces as dir ected by the engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift, etc., complete. , supplying and fixing in position of anodized colour coated aluminium framed partition of approved quality as detailed below and as directed by the engineer at site including, cost of aluminium section, beading, rubber beading, cleat angle and all materials, labour charges, lead, lift, etc., complete. i) vertical and horizontal posts: colour coated anodized aluminium section 63x38mm of thickness 2.45mm, country wood filled al-round, verticals @ spacing of 900mm c/c (max) and horizontals at 0m, 0.90m & 2.10m (max). ii) mdf board or its equivalent grade board of 12mm thick both sides laminated for a height of 900mm from floor level. , providing and fixing anodized aluminium glass door, single leaf swing type with approved door closure and 5mm thick plain glass with standard accessories but not limited to handles, locking arrangement, rubber beading, aluminium cleat etc., complete as detailed below including cost of all materials, labour charges, t&ps, leads and lifts etc. complete. i) shutter verticals : colour coated anodized aluminium section 47.5x 44.5mm of 2.45mm thick - 2nos, ii) shutter horizontals: colour coated anodized aluminium section 100x45mm of 2.45mm thick - 3nos, iii) shutter