tender for supplying and fixing in position of anodized colour coated aluminium framed partition of approved quality as detailed below and as directed by the engineer at site including cost of all materials, labour charges, leads & lifts, etc. complete. (i) vertical posts: colour coated ano- dized aluminium section 63x38mm of thickness 2.45mm with country wood filling @ spacing of 900mm c/c(max). (ii) horizontal member: colour coated anodized aluminium section 63x 38mm of thickness 2.45mm with country wood filling at 1.00m, 1.90m, 3.10m, and 4.15m (max) from the floor level. iii) shutter: shutter covered with mdf board of 12mm thick, both sides melamine finish for a height of 900mm from finished floor level (false floor) and 4mm thick plain glass for the height from 0.90m to full height. iv) beading: colour coated anodized aluminium beading of weight not less than 0.12kg/m on both sides of the shutter. , supplying and fixing of 5mm thick plain glass of approved quality as directed by the engineer at site including cost of glass, rubber beading, labour charges, leads & lifts, etc. complete. , supplying and fixing anodized aluminium glass door, single leaf swing type with 5mm thick plain glass with standard accessories but not limited to handles, locking arrangement, rubber beading, aluminium cleat etc., complete as detailed below including cost of all materials, labour charges, t&ps, leads and lifts etc. complete. i) shutter verticals : colour coated anodized aluminium section 47.5x 44.50mm of 2.45mm thick - 2nos, ii) shutter horizontals: colour coated anodized aluminium section 100x45mm mm of 2.45mm thick - 3nos, iii) shutter: top & bottom with 5mm thick plain glass. , supplying and fixing in position of hdpe pipe of 160mm dia. of approved make and quality as directed by the engineer in-charge including cost of pipes, all specials, clamps and screws, labour charges, leads & lifts etc., complete.