tender for removing the damaged floor tiles and disposing the debris to the far away place as directed by the engineer at site including labour charges, transporting charges, leads & lifts etc. complete. , providing floor finish with vitrified tiles of approved make, colour and quality and of size 600x600 over 10mm thick cement mortar 1:3 bedding and pointing with same colour cement in all floors including cutting chase in walls wherever required, cost of all materials labour charges leads & lifts, curing t&p, personal protective equipment, other safety appliances, etc. complete. , removing the aluminium glazed partition, doors etc and stock the same carefully for reuse including all labour charges, hire charges of tools & plants, leads & lifts etc. complete. , re erection of aluminium glazed partition as directed by the engineer at site using with retrieved materials including all labour charges, hire charges of tools & plants, leads & lifts etc. complete. , re erection of aluminium glazed door as directed by the engineer at site using with retrieved materials including all labour charges, hire charges of tools & plants, leads & lifts etc. complete. , supplying and fixing in position of anodized colour coated aluminium framed partition of approved quality as detailed below and as directed by the engineer at site including cost of aluminium section, beading, rubber beading, cleat angle and all materials, labour charges, lead, lift , etc. complete. (i) vertical and horizontal posts: colour coated anodized aluminium section 63x38mm of thickness 2.45mm, country wood filled al-round, verticals @ spacing of 900mm c/c (max) and horizontals at 0m, 0.90m and 2.10m (max). ii) mdf board or its equivalent grade board of 12mm thick both sides laminated for a height of 900mm from floor level. iii) 5mm thick frost glass for the height from 900mm to 2100mm iv) colour coated anodized aluminium beading of weight not less than 0.12kg/m on both sides of the shutter. , supplying and fi