tender for led street light work from kunjilal shop ramghat road to vidhyanagar. - supply and fixing decorative pole and decorative street light. the pole with single arm bracket total height of the pole with single arm bracket shall be 4000 mm nominal above the ground. the pole is made out of mild steel tube in two steps. the dimensions of the bottom section of the pole is 140mm dia x 1500mm long -4mm thick and top section is 114 mm dia, 3500 mm long x 3mm thick 1 mtr long ornamental bracket. cast aluminium embellishments are fitted with the help of grub screws .a square mild steel base plate of dimension 250mm x 250mm x18mm thick shall be welded at the bottom of the pole with the stiffeners. a built in service window is provided to accommodate a 6 amp sp mcb and 32 amp heavy duty connector for mains connections in the bottom part of the pole. the different sections of the pole are joined together by means of welded joints. the decorative bracket is made out of mild steel fabrication. the mild steel parts part are joined together & are fabricated to get the desired design. the height of the bracket shall be 1000mm. the decorative single arm bracket should have the arrangement to fix the required luminaire. the single arm bracket should have the arrangement suitable to be fitted on the required pole. the decorative pole and single arm bracket shall be machined and polished properly to give it a smooth surface. the decorative pole with single arm bracket is duly pretreated by shot blasting process and painted in u.v. ray resistant p.u. coating in approved colour shade. fixing of pole with hillt super fixture compound resign with fastener screen withfixing of ornamental 100 watt led drop down luminaire aluminium housing powder coated pu paint with acrylic clear diffuser for light, dia≥ 510mm and height ≥ 600mm and above having suitable heat sink and philips driver. onsite maintenance with material with labour for 05 year. 2 r.c.c foundation of size 200x200x800 mm of 1:2:3 composition of cement concrete & sand 8 number- 12mm dia steel boar of 1000 mm size with 8 mm dia steet bar 06 rings. 3 supply and laying of 16 sq. mm 3-1/2 core aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (sor 501-j) 4 supply and burying of 40mm dia x 4.5 metres long g.i. pipe vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8swg gi wire in g.i. pipe up to appron (and from appron to switch board the cost of g.i. wire and pipe will be extra) upto switch board, 30cm square c.i. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of engineer-in-charge complete in all respects as per drawing. (sor- 701) 5 supply and fixing following capacity of 25 a tpn automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. (sor- 807 e) 6 hdpe 50mm dia pipe (market value) 7 connector 8 s & f of 6 amp to 32 amp. spmcb (10 ka) c curve 9 copper lugs for wire ends.