providing street light poles to main roads in parli vaijnath city area non ssr item at parali dist beed , supplying & erecting decorative single arm bracket 1000 mm long made out of g.i. pipe as per is 1239 having shaft cap dia of 101.6 mm and bracket arm made of 48.3 mm dia x 3.2 mm thick g.i. pipe with nut bolt arrangement for mounting on conical/octagonal pole top. additinal arrangement of trishul & dome on top of pole by asethetically fabricated & laser cutting with p.u. coating. the bracket shall have frp dome on the top. similar to model: muskdeer single arm, bajaj make , supplying & erecting 100 watt led suspension type decorative street light fitting made of spun alluminium housing, polycarbonate diffuser protector with ip65 protection foroptical compartment, with high power leds cct 5700k. the luminaire shall have inbuilt ip 65 driver, voltage range 170-280 v, power factor >0.95, efficiency should be 90 lumens/watt, thd should be less than 10, cri should be more than 85& above 4 kv surge protection. similar to bajaj make 100w led borage model , supplying and erecting monochromatic buried / pole inside mounted led fixture of 114 mm dia and height ( or suitable dimensions) , up lighter ideal for up lighting decorative section of pole suitable for landscape, facades, columns & features with multiple optics & saturated tones of white . housing made up of die casting grey powder coated aluminum. hard chrome plated stainless steel sus 316l grade front ring. ip68 pg-9 pa66 cable gland. suitable for operating temperature -20° c to 40° c. abs 015 mounting sleeve. wattage are max 6 to 8 watt , ip 67 , ik 07 and options of beam angle of 8 deg to 15 deg must so as to give desired lighting effect. , supplying and erecting architecturally designed and structurally sound arched tubular street lighting suitable for single arm bracket decorative pole of height 9000 mm, suitable for various pendent type street lighting luminaries.material used for tubes steel of grades yst 210 groove technique using high end mig welding process .the pole coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base black paint. the pole consist of built in control box with cast aluminium service door and safety rope .the control gear tray is prewired with mcb , terminal connectors for loop out arrangement.the pole surface mounted with base plate of steel of grade e250 as per is2062:2011,complete with foundation hardware on provided c.c foundation. , supplying & erecting decorative double arm bracket 1500 mm long made out of g.i. pipe as per is 1239 having shaft cap dia of 101.6 mm and bracket arm made of 48.3 mm dia x 3.2 mm thick g.i. pipe with nut bolt arrangement for mounting on conical/octagonal pole top. additinal arrangement of trishul & dome on top of pole by asethetically fabricated & laser cutting with p.u. coating. the bracket shall have frp dome on the top. similar to model: muskdeer single arm, bajaj make , supplying and erecting architecturally designed and structurally sound arched tubular street lighting decorative pole of height 9000 mm suitable for double arm, suitable for various pendent type street lighting luminaries.material used for tubes steel of grades yst 210 groove technique using high end mig welding process, mounted with base covered by decorative c.i. casting similar to k lite model pelican orna bishop series.the pole coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base black paint. the pole consist of built in control box with cast aluminium service door and safety rope .the control gear tray is prewired with mcb , terminal connectors for loop out arrangement.the pole surface mounted with base plate of steel of grade e250 as per is2062:2011,complete with foundation hardware on provided c.c foundation.