bids are invited for steel tubular pole - supply & fixing steel tubular pole 9 metre long designated 410 sp-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. , shackle insulator - supply & fixing of 100 mm x 110 mm shackle insulator / 100 mm x 80 mm pin insulator including g.i. bolts / spindle nuts etc. complete in all respect. , d clamps - supply & erection of d clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . , acsr conductor - supply & erection of overhead line with acsr conductor on poles / service bracket including binding etc. complete in all respects. , overhead line with g.i. wire - supply & erection of overhead line with g.i. wire no. 8 to 4 swg on poles / serivce bracket including binding etc. complete in all respect. , electrification erection work - supply & erection of stay set at least 3.5 metres away from the pole complete with galvanised 19 mm dia x1.80 metre long stay rod, 30 cm x 30 cm x 6.3 mmanchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7 / 4.00 mm g.i stay wire etc. in 1:3:6 cement concrete complete in all respect. , painting of the electric pole - painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. , switch fuse - s&f of 63 amp. 415 v metal clad tp hrc type switch fuse unit complete with hrc fuse on angle iron bracket complete in all respect. , electrification earthing work - supply and burying of 40mm dia x 4.5 metres long g.i. pipe vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8swg gi wire in g.i. pipe up to appron ( and from appron to switch board the cost of g.i. wire and pipe will be extra ) upto switch board, 30cm square c.i. box with hinged cover masonaryenclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150mm thick alround etc. as per directions of engineer-in-charge complete in all respects as per drawing. , led street light - supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for90 watt. confirming to ip 66 and above protection complete in all respect. , cable 35 sq. mm 3.50 core - supply and laying ofaluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protectedwith burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.35 sq. mm 3.50 core , brass nickle plated compression gland - supply and fixing ofbrass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. the armouring of the cable shall be properly connected with the earth as per direction of engineer- incharge.35 sq. mm 3.50 core , cable socket ( lug ) - supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the engineer-incharge. 35 sq. mm , wiring of submains - supply and wiring of submains with 2 nos. 6 sq. mm.frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing conduitcomplete with supply of all material labour and t&p required for proper completion of the work as directed at site by engineer in charge. total quantity : 1