tender for the work of electric pole on divider from western bypass to vishnu garh road, nagar palika parishad chhibramaniu mine west raipass to vishnu gadh detail and bill of quantity work of electric pole gi double bracket 25mm 03 core umcorder cable, 90 watt x2 nos led light fitting on divider road., 1 supply & fixing of 7 mtr gl octagonal pole of approved make (top dia 70 mm, bottom dia 70 mm bottom dia 130 mm and base plate 12mm thick) having 3 mm thickness with double arm bracket on r.c.c foundtaion including the cost of foundation bolts, excavation & back filling and required complete in all respect. (s.r no. no 642 of sor) 2 s/l of 25 sq.mm 3-1/2 core aluminium conductor pvc insulated unarmored served cables 1100 volts grade on pole complete in all respects. (s.r no. no 501 (j) of sor) 3 s/buring of safe earth electrode t-19 (hot dip galvanizzed) length upto 2000 mm 3 outer dia 50 mm inner dia 25 mm for earthing complete. (p.s. no.725 (a)) 4 supply and erection of stay set at least 3.5 mtr, away from the pole complete with galvanised 19 mm dia x 1.80 mtr, long stay rod, 30 x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener 7/3.5 mm gl stay wire etc in 1:3:6 cement concrete complete in all respect. 5 supply and laying of 32 mm x 6mm g.1 strip from earth electrode directty in the ground as required complete in all respect. (s.l. no.717) 6 supply and fixing of 75 mm x 90 mm shackle insulator / 100 mm x 6 65 mm pin insulator including g.i bolts/spindle nuts etc.complete in all respect. (s.r no.620) 7 supply and erection of dclamps of 50 mm x 6 mm flat iron on steel tubular poles 7/steel rali poles with bolts, nuts etc, complete in all respects including painting with aluminium paint. (s.r no.623) 8 s/l of 6 mm x 2 core cable under pole. (s.p. no.501(a)) 9 s/f of of led street light fitting having dia cast aluminium body and diffusion 9/reflector with driver set sultable for 90 watt confrming to ip 66 protection complete in all respect cat: aa (s.r 1423) 10 s/f of main feeder pillar with over voltage and under voltage relay with auto re- setting manufactured using 1.9/1.6 mm thick craca sheet steel with powder coated paint double door with canopy base channel with cable gland entry from bottom for cable using suitable aluminium busbar with provision of incoming & outgoing mccb of l&t/schnelder/ge/abb make installation of feeder pillar of suitable foundation (all mmccb to be rotatory handie type) incoming 100a 2pole mccb-1 no. outgoing-63a 2 pole mccb-2 no. (s.l no.811 c) 11 numbering of pole by letter writing (number, named, agency) with cost of radium, steekar