bids are invited for led street light- 1 supply & fixing of 7 mtr gi octagonal pole of approved make ( top dia 70mm, bottom dia 130mm and base plate 12mm thik ) having 3mm thickness with single arm including the cost of foundation, excavation & backbracket 1 mtr length in 1:2:4 rcc foundation bolt filling and required t&p complete in all respect 2 supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 watt to 90 watt. confirming to ip66 protection complete in all respect. 3 supply and laying of aluminium conductor 25 sq. mm 3-1 / 2 core pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc 4 supply & fixing of single pole mcb 5 supply & fixing of 75 mm x 90 mmc shackle insulator / 100 mm x 65 mm pin insulator including g.i. bolts / spindle nuts etc. complete in all respect. 6 supply & fixing of 230 mm x 32 mm x 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. 7 supply & erection of d clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint 8 supply & erection of 600 mm long cross arm of 50 mm including painting with aluminium paint. 9 supply & erection of overhead line with acsr conductor on poles / service bracket including binding etc. complete in all respects. 10 led colorful strip lights surrounding each pole in multi tri color 11 supply & erection of stay set at least 3.5 metres away from the pole complete with galvanised 19 mm dia x1.80 metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7 / 4.00 mm g.i stay wire etc. in 1:3:6 cement concrete complete in all respect. 12 supply and fixing of 320 amp four pole change over switch on 50 mm x 50 mm x 6 mm angle iron frame, including the cost of labour, t&p, painting and other material required for proper completion of the work as per direction and satisfaction of engineer in charge. 13 supply and burying of 600mm x 600mm x 6mm g.i. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia g.i. pipe and funnel for watering and one earthing lead of one no. 8 to 10 swg gi wire in 15mm dia g.i. pipe up to switch board ( from appron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm square c.i. frame with hinged cover masonry housing alternate layers of charcoal / coke and salt at least 150mm thick all round etc. as per directions of engineer-in-charge complete in all respects as per drawing ( this will apply for earthing of poles also )