3 2022 23 estimate for interlinking of ht lines to resolve low voltage problem in lwss kandhapattan to mandap and various other lwss of jal shakti vibhag situated at kandhapattan complex sub works interlinking of 11 kv chakyana chaus line , ( supply part ) , prov. rcc muff with concrete filling , run thro structures on single poles: , cross arm: [ channel iron ( 100x50x6 mm ) , length ( 1270 ) mm , angle iron ( 50x50x6 mm ) , length ( 2x750 ) mm , pole top bracket , dead end structure on double poles: , belt set-ms angle iron: 50x50x6, length [ 1800 mm x 2 no. ] , x-bracing set-ms angle iron: 50x50x6, length [ 2125 mm x 2 nos. ] , x-arm ( horizontal ) - ms channel iron: 100x50x6, length [ 2340 mm x 2 nos. ] , x-arm ( horizontal ) - ms channel iron: 75x40x6, length [ 2800 mm x 2 nos. ] , disc insulators set on dead end structure ( comprising 1 no. disc: ^^ ( porcelian, bs, 12 kv, 90 kn, ) i / c dead end clamps etc. ) x ( 3 nos. conductors ) x ( 2 nos. sides ) , ht stay / guy arrangement , prov. stay set complete in all respect , prov. stay wire ( 7 / 3.15 mm ) ( @ 10.0 kg. per stay set ) , earthing , prov. ht earthing set complete , eye hook for earth wire , earth wire clamp , half clamps ( on run thro structure ) , full clamps ( on dp& sp structure ) , prov. 11 kv danger plate ( 250x200x1.60 mm ) , prov. m.s. nuts & bolts of various sizes with flat and spring washers , prov. barbed wire , prov. alluminium paint . , go ab switch unit ( 11kv, 400a, 25 ka ) , add 3% transporation charges , erection part , erection of st pole 10.00 mtr. long ( single pole structure ) with rcc muffs including digging of pit, drilling of holes inpoles, x- bracing set, x-arm, fixing of pin / disc insulators, x-arm, x-bracing set, fixing of barbed wire danger plate, filling of pit+ramming, painting of pole , fixing of nuts-bolts , half / full clamps etc. complete in all respects. , erection of st pole 10.00 mtr. long ( double pole structure ) with rcc muffs including digging of pit, drilling of holes inpoles, x- bracing set, x-arm, fixing of pin / disc insulators, x-arm, x-bracing set, fixing of barbed wire danger plate, filling of pit+ramming, painting of pole , fixing of nuts-bolts , half / full clamps etc. complete in all respects. , erection of st pole 10.00 mtr. long ( four pole structure ) with rcc muffs including digging of pit, drilling of holes inpoles, x- bracing set, x-arm, fixing of pin / disc insulators, x-arm, x-bracing set, fixing of barbed wire danger plate, filling of pit+ramming, painting of pole , fixing of nuts-bolts , half / full clamps etc. complete in all respects. , erection of st pole 10.00 mtr. long ( six pole structure ) with rcc muffs including digging of pit, drilling of holes inpoles, x- bracing set, x-arm, fixing of pin / disc insulators, x-arm, x-bracing set, fixing of barbed wire danger plate, filling of pit+ramming, painting of pole , fixing of nuts-bolts , half / full clamps etc. complete in all respects. , erection of ht stay sets comprising ofdigging of pit, fixing of stay rod, filling of pit, nozzeling and tighting etc.complete in all respect , erection of earthingcomprising ofdigging of pit, fixing of gi wire to earthsystem , eye hook & filling of pit etc. complete in all respects. , erection of go switch complete in all respects . , laying, stringing, sagging & bindingof acsr cond. 6 / 1 / 4.72 mm complete in all respects , laying, stringing, sagging & bindingof gi wire8 swg complete in all respects. , manual carriage of st pole 11 mtr.long, rcc muffs, x-arm, x-bracing set, x-belt set , ht stay sets, go switch, do fuse unit , conductor , gi wire & other misc. complete fittings etc. one km average distance.