tender for providing special repair work for vidya mandir mangeshkarnagar kothali no.1 tal-shirol- 1 providing second class burnt brick masonry with conventional / indian standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. (for ground floor) (using artificial sand).item / page no : 5 / 197specification no : bd.g.5spec. page no : 315additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 2 providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 6 / 209specification no : bd.l.4spec. page no : 368additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 3 providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (for ground floor)item / page no : 2 / 264specification no : bd.u.1spec. page no : 537 4 providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 milimetre x 9 milimetre x 3 milimetre minimum size, crossings of mild steel flats of size 18 milimetre x 5 milimetre t or e section for runner of minimum 40 milimetre x 6 milimetre size for flange, mild steel flat for top runner of minimum size 40 milimetre x 12 milimetre with roller wheels confirming to grade f.g. 150 fitted with snap headed rivets of minimum size 6 milimetre, maximum spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting, excetra complete. (indian standard : 10521-1983). (for ground floor)item / page no : 26 / 249specification no : bd.t.57spec. page no : 511 5 providing 25 milimetre to 30 milimetre thick partition of polished black kadappa stone slab of approved quality including giving required sizes and shape, excetra, fixing in cement mortar 1:3, curing and cement, excetra complete. - both side polish (for ground floor) (using artificial sand).item / page no : 33 / 216specification no : bd.m.35bspec. page no : 393additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 6 providing and applying white wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down, excetra complete. (for ground floor)item / page no : 2 / 227specification no : bd.p.1spec. page no : 411 7 providing and applying plastic emulsion paint of approved quality, colour and shade to new surfaces in three coats including scaffolding, preparing the surfaces (excluding primer coat), excetra complete.item / page no : 14 / 228specification no : bd.p.6spec. page no : 414 8 providing and applying two coats of synthetic enamel paint of approved colour to new / old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat), excetra complete. (for ground floor)item / page no : 7 / 223specification no : bd.o.5spec. page no : 405 9 providing and fixing 30 milimetre thick both side prelaminated solid panel polyvinyl chloride door shutter consisting of frame made out of mild steel tube of 19 gauge thickness and size 19 milimetre x 19 milimetre for styles and 15 milimetre x 15 milimetre for top and bottom rails, mild steel frame shall have a coat of metel primer of approved make and manufacture. mild steel frame shall be covered with heat mouled polyvinyl chloride c channel made from 5 milimetre (+/0.25) thick prelaminated sheet of density 600 kilogram per cubic metre, of size 30 milimetre thickness 70 milimetre width out of which 50 milimetre shall be flat and 20 milimetre shall be tapered in 45 degree angle on either side forming stiles; and 5 milimetre thick, 95 milimetre wide polyvinyl chloride sheet out of which 75 milimetre shall be flat and 20 milimetre shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 milimetre wide polyvinyl chloride sheet out of which 75 milimetre shall be flat and 20 milimetre shall be tapered on both sides to form lock rail. top, bottom and lock rail shall be provided either side of the panel. an additional 5 milimetre (+/0.25) thick polyvinyl chloride strip of 20 milimetre width is to be stuck on the bottom side of the c channel prelaminated paneling of 5 milimetre (+/0.25) thick polyvinyl chloride sheet to be fitted inside the mild steel frame welded / sealed to the styles and rails with 5 milimetre (+/0.25) x 30 milimetre polyvinyl chloride sheet beading on either side and joined together with solvent cement adhesive, excetra 10 milimetre thickness (5 milimetre (+/0.25) x 2 numbers) 20 milimetre wide cross polyvinyl chloride sheet as gap insert for the rail and bottom rail. door to be fixed to frames with 3 numbers mild steel powder coated butt hinges of size 100 milimetre x 25 milimetre x 2 milimetre using 32 milimetre long steel screws drilled suitable to pass through both the walls of the mild steel tube. other hardwares should be fixed with 19 milimetre x 6 milimetre size steel screws including fixture fasting. complete as per direction of engineer in-charge. (for ground floor)item / page no : 47 / 255additional specifications : the work shall be done as per instructions of engineer in charge. 10 providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 milimetre to 15 milimetre thick in cement mortar 1:4 and routh cast treatment 12 milimetre thick in proportion 1:1.1/2:3 including scaffolding and fourteen days curing complete. (for first floor) (using artificial sand).item / page no : 12 / 209specification no : bd.l.8spec. page no : 370additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 11 providing and laying cast in situ / ready mix cement concrete m-15 of trap / granite / quartzite / gneiss metal for steps including steel centering, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (wooden centering will not be allowed.) with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 4 / 175specification no : bd.e.2,b-7spec. page no : 288,38-40additional specifications : 1. with additional specifications for controlled concrete.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 12 providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to indian standard 15622-2006 (group bia) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (for ground floor) (using artificial sand).item / page no : 42 / 217specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 13 providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per indian standard : 4923 yst 310 grade produced from iron ore and blast furnace route, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and painting complete. (for ground floor)item / page no : 12 / 174additional specifications : work shall be carried out as per the instructions of engineer in-charge. 14 providing selected hard murum filling including laying in layers of 15 centimetre to 20 centimetre, watering and compacting, excetra compelte.item / page no : 24 / 82specification no : cd.14spec. page no : 167 15 providing and fixing heavy duty inter locking concrete gray paving blocks of 60 milimetre thickness of having a strength of 300 kilogramme per square centimetre of approved quality and shape on a bed of crushed sand of 25 milimetre to 30 milimetre thick including striking joints and cleaning, excetra complete.item / page no : 49 / 218additional specifications : the work shall be carried out as per instructions of engineer in charge. 16 providing cement based water proofing treatment to terraces (indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at one kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. marking finished surface with false squares of 300 milimetre x 300 milimetre, making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years guarantee against leakproofness on court fee stamp paper of rs. 500/- including ponding test, excetra complete. (for ground floor) (using artificial sand).item / page no : 4 / 205additional specifications : 1. the work shall be carried out as per instructions of engineer in charge.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 17 excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (lift upto 1.5 metre) by manual meansitem / page no : 1 / 153specification no : bd.a.1spec. page no : 259 18 providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand / grit, ramming, watering, excetra complete.item / page no : 40 / 157additional specifications : the work shall be carried out as per instructions of engineer in-charge. 19 providing and laying cast in situ / ready mix cement concrete m-20 of trap / granite / quartzite / gneiss metal for steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (wooden centering will not be allowed.) with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 6 / 175specification no : bd.e.2,b-7spec. page no : 288,38-40additional specifications : 1. with additional specifications for controlled concrete.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 20 provoding and fixing high density polyethylen container one piece moulded water tank made out of high density polyethylen and built corrugated inclusive of delivery upto destination housing, fixing of accessaries such as inlet, outlet, overflow pipe inclusive of all taxes - capacity between 1000 litres to 20000 litres. (for ground floor)item / page no : 54 / 280additional specifications : the work shall be done as per instructions of engineer in charge. 21 providing, laying and fixing polyvinyl chloride pipe of 110 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra including necessary excavation, trench filling, excetra complete.including removing existing pipe line if necessary and conveying and stacking thesame in pwd chowky or as directed excetra complete.item / page no : 28 / 277additional specifications : the work shall be done as per instructions of engineer in charge. 22 providing, laying and fixing polyvinyl chloride pipe of 75 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra inclduding necessary excavation, trench filling, excetra complete.including removing existing pipe line if necessary and conveying and stacking thesame in pwd chowky or as directed excetra complete.item / page no : 27 / 276additional specifications : the work shall be done as per instructions of engineer in charge. 23 providing and fixing in position (as per indian standard 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre x 38.10 milimetre x 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre x 31.75 milimetre x 1.20 milimetre at weight 0.695 kilogram per running metre. top and side track section 61.85 milimetre x 31.75 milimetre x 1.30 milimetre at weight 0.659 kilogram per running metre. the shutter should be of bearing bottom 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre. interlocking secion 40 milimetre x 18 milimetre x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts excetra complete. - with colour anodising without box. (for ground floor)item / page no : 38 / 251additional specifications : the work shall be done as per instructions of engineer in charge. 24 providing and laying telephone black / amba white / cadbury brown / rbi red / ocean brown granite stone of 18 milimetre to 20 milimetre thick for door frame / dado / window boxing, excetra on cement mortar 1:6 including filling joints with polymer base filler, nosing the sharp edges wherever necessary, curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 68 / 220additional specifications : 1. the work shall be carried out as per the sample approved by the engineer in-charge and kept in the office of the executive engineer.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 25 royalty charges for various building construction bonafied materials which are used for government bonafied works and for which royalty charges are to be paid by the contractor. (this item is to be paid to the contractor only after he pays the royalty amount to revenue department and produces the required voucher.)item / page no : 3 / 0additional specifications : 1. government of maharashtra, revenue and forest department gazette number 146 dated 04/06/2021 and government of maharashtra public works department state schedule of rates 2021-22 general note number a(v), page 5.2. the amount of royalty charges will be paid only after submission of the receipt in original from revenue authority for payment of royalty to government, stating the name of work.3. above / below percentage quoted by the contractor will not be applicable for this item. 26 laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by vigilence and quality control circle, pune.item / page no : 4 / 0additional specifications : 1. the amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the vigillence and quality control office with the name of work mensioned on it.2. above / below percentage quoted by the contractor will not be applicable for this item.water absorption, compressive strength, efflorescence test for burnt bricks1 test per 50000.00 number 27 providing and fixing 90 centimetre x 60 centimetre marble name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete.item / page no : 11 / 294specification no : bd.w.7spec. page no : 586-587 28 insurancenon-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge. 29 g s tnon-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge.