tender for repairs to adhykashy nuvasthav and providing facilities tal.miraj dist.sangli- 1 providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 8 / 209specification no : bd.l.4spec. page no : 368additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 2 removing ventilators and small windows with frame and stacking the materials with all leads lifts excetra complete.item / page no : 16 / 296additional specifications : the work shall be carried out as directed by engineer-in-charge. 3 removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts excetra complete.item / page no : 19 / 297additional specifications : the work shall be carried out as directed by engineer-in-charge. 4 removing mud plaster including disposing of the spoils as directed with all leads, lifts excetra complete.item / page no : 23 / 297additional specifications : the work shall be carried out as directed by engineer-in-charge. 5 removing urinal pans or wash hand basin with frame including disconnecting the sanitary and water supply connections. removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side excetra complete.item / page no : 40 / 298additional specifications : the work shall be carried out as directed by engineer-in-charge. 6 removing water closet pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side excetra complete.carefully and throwing out the refusal outside excetra complete.item / page no : 41 / 298additional specifications : the work shall be carried out as directed by engineer-in-charge. 7 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts excetra complete.item / page no : 9 / 296additional specifications : the work shall be carried out as directed by engineer-in-charge. 8 providing second class burnt brick masonry with conventional / indian standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. (for ground floor) (using artificial sand).item / page no : 5 / 197specification no : bd.g.5spec. page no : 315additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 9 providing internal cement plaster 12 milimetre thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 4 / 209specification no : bd.l.2spec. page no : 368additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 10 providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 7 / 209specification no : bd.l.4spec. page no : 368additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 11 providing and laying matt finish ceramic tiles of having sizes 30 centimetre x 30 centimetre and confirming to indian standard 15622 : 2006 (group dii-a) and 7 milimetre to 8 milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white / colour cement slurry, cleaning, curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 24 / 215specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 12 providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to indian standard 15622-2006 (group bia) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (for ground floor) (using artificial sand).item / page no : 42 / 217specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 13 providing and laying vitrified rustic matt stone finish tiles having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to indian standard 15622-2006 (group bia) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (for ground floor) (using artificial sand).item / page no : 44 / 217specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 14 providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (for ground floor)item / page no : 2 / 264specification no : bd.u.1spec. page no : 537 15 providing and fixing in position (as per indian standard : 1868/1982) aluminium sliding window of three tracks with rectangular pipe having overall dimentsions 95 milimetre x 38 milimetre x 0.90 milimetre at weight 0.637 kilogram per running metre and window frame bottom track section 92 milimetre x 31.75 milimetre x 1.30 milimetre at weight 1.070 kilogram per running metre. top and side track section 92 milimetre x 31.75 milimetre x 1.30 milimetre at weight 0.933 kilogram per running metre. the shutter should be of bearing bottom 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre. interlocking secion 40 milimetre x 18 milimetre x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts excetra complete. - with colour anodising with box. (for ground floor)item / page no : 41 / 253additional specifications : the work shall be done as per instructions of engineer in charge. 16 providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings, approved face veneers 3 milimetre thick on both faces or as directed, all necessary beeds, moulding and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides and finishing with french polish, excetra complete. (for ground floor)item / page no : 9 / 246specification no : bd.t.34spec. page no : 499 17 providing and fixing black kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lower side, rounding corners, laying in position, jointing with cement mortar bedding in cement mortar 1:4 proportion, curing, excetra complete. (for ground floor)item / page no : 23 / 215specification no : bd.m.29spec. page no : 391 18 providing and laying telephone black / amba white / cadbury brown / rbi red / ocean brown granite stone of 18 milimetre to 20 milimetre thick for door frame / dado / window boxing, excetra on cement mortar 1:6 including filling joints with polymer base filler, nosing the sharp edges wherever necessary, curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 68 / 220additional specifications : 1. the work shall be carried out as per the sample approved by the engineer in-charge and kept in the office of the executive engineer. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 19 providing and laying in position flooring of telephone black / amba white / cadbury brown / rbi red / ocean brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on a bed of 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3, curing and cleaning, excetra complete. (for ground floor) (using artificial sand).item / page no : 34 / 216specification no : bd.m.3 bspec. page no : 380additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 20 providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shed having telephonic black / colour granite of 18 milimetre thick fixed on black kadapaa frame work, including cromium plated coupling, bottle-trap using approved make oval type wash basin as per detailed drawing or as directed by engineer in-charge, excetra complete. (for ground floor)item / page no : 88 / 283additional specifications : the work shall be carried out as per instructions of engineer in charge. 21 providing and fixing welded mesh of 50 milimetre x 25 milimetre and 11 gauge to country cut teak wood framework as per detailed drawing or as directed, iron fastening with one coat of primer, scaffolding, including teak wood framework of 70 milimetre x 75 milimetre and covering country cut teak wood battens of 45 milimetre x 10 milimetre, excetra complete. (for ground floor)item / page no : 71 / 260additional specifications : the work shall be done as per instructions of engineer in charge. 22 providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 milimetre x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers of approved quality, excetra complete. (for ground floor)item / page no : 68 / 259additional specifications : the work shall be done as per instructions of engineer in charge. 23 providing and fixing in position, double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 milimetre x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 3 milimetre thick top rails 47.62 milimetre x 44.45 milimetre, 3 milimetre thick, vertical style 47.62 milimetre x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, indian standard institution mark, heavy duty, hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, poly vinyl chloride gaskets, 250 milimetre length tower aluminium bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments, excetra complete. (for ground floor)item / page no : 63 / 258additional specifications : the work shall be done as per instructions of engineer in charge. 24 providing and fixing in position, single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 milimetre x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 3 milimetre thick top rails 47.62 milimetre x 44.45 milimetre, 3 milimetre thick, vertical style 47.62 milimetre x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, indian standard institution mark, heavy duty, hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, poly vinyl chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments, excetra complete. (for ground floor)item / page no : 64 / 259additional specifications : the work shall be done as per instructions of engineer in charge. 25 providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 milimetre to 30 milimetre thick supports with kadappah top 35 milimetre to 40 milimetre thick and polished granite 16 to 20 milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 centimetre x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite excetra complete.(platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (for ground floor)item / page no : 78 / 273additional specifications : the work shall be carried out as per instructions of engineer in charge. 26 providing and fixing coloured glazed with bottle trap earthenware wash hand basin of 55 centimetre x 40 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including unplasticized polyvinyl chloride waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing excetra complete.item / page no : 72 / 273specification no : bd.v.30spec. page no : 616 27 providing and applying pearl / luster finish paint of approved colour and shade to the existing plastered surface including scaffolding, preparing the surface, applying the acrylic wall putti, excetra complete. (for ground floor)item / page no : 23 / 225additional specifications : the work shall be carried out as per instructions of engineer in charge. 28 providing and fixing foldable aluminium ladder 1500 milimetre height.item / page no : 52 / 365additional specifications : the work shall be done as per instructions of engineer in charge. 29 providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding indian standard of approved manufacturer and of approved colour to the plastered surfaces including cleaning, preparing the plaster surfaces, applying primer coat, scaffolding, if necessary and watering the surface for two days, excetra complete. (for ground floor)item / page no : 25 / 225additional specifications : the work shall be carried out as per instructions of engineer in charge. 30 providing and laying damp proof course 50 milimetre thick in m-20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork, excetra complete. (for ground floor) (using artificial sand).item / page no : 1 / 205specification no : bd.j.2spec. page no : 355additional specifications : 1. with addtional specifiactions for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 31 providing and constructing brick masonry inspection chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, half round glazed stoneware pipes, brick masonary, plastering from inside and farme fixed in cement concrete cover medium duty 140 kilogram with frame excetra complete. (using artificial sand).item / page no : 12 / 275specification no : bd.v.43spec. page no : 574additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 32 providing and constructing brick masonry inspection chamber 90 centimetre x 45 centimetre with reinforced cement concrete raft in black cotton soil area including cost of reinforcement, 1:2:4 cement concrete channels half round glazed stoneware pipes, brick masonry, plastering from inside and airtight 75 milimetre thick reinforced cement concrete cover, medium duty 140 kilogram excetra complete. (using artificial sand).item / page no : 17 / 275specification no : bd.v-43spec. page no : 574additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 33 providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick bats.item / page no : 19 / 275specification no : bd.v.46spec. page no : 576 34 providing and fixing 450 milimetre x 550 milimetre size superior type belgium mirror with 16 milimetre diameter nickel plated towel rod, excetra complete. (for ground floor)item / page no : 20 / 276additional specifications : the work shall be done as per instructions of engineer in charge. 35 providing, laying and fixing polyvinyl chloride pipe of 50 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra including necessary excavation, trench filling, excetra complete.including removing existing pipe line if necessary and conveying and stacking thesame in pwd chowky or as directed excetra complete.item / page no : 26 / 276additional specifications : the work shall be done as per instructions of engineer in charge. 36 providing, laying and fixing polyvinyl chloride pipe of 75 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra inclduding necessary excavation, trench filling, excetra complete.including removing existing pipe line if necessary and conveying and stacking thesame in pwd chowky or as directed excetra complete.item / page no : 27 / 276additional specifications : the work shall be done as per instructions of engineer in charge. 37 providing, laying and fixing polyvinyl chloride pipe of 110 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra including necessary excavation, trench filling, excetra complete.including removing existing pipe line if necessary and conveying and stacking thesame in pwd chowky or as directed excetra complete.item / page no : 28 / 277additional specifications : the work shall be done as per instructions of engineer in charge. 38 providing and fixing chromium plated towel rod 16 milimetre diameter and 75 centimetre in length including all accessories complete. (for ground floor)item / page no : 31 / 277additional specifications : the work shall be done as per instructions of engineer in charge. 39 providing and fixing half turn 25 milimetre diameter gun metal flushing cock including all accessories, excetra complete. (for ground floor)item / page no : 32 / 277additional specifications : the work shall be done as per instructions of engineer in charge. 40 providing and fixing first class white glazed earthenware orissa type water closet pan 580 milimetre diameter including p or s trap, cast iron soil and vent pipe upto the outside face of the wall, 1:5:10 cement concrete bedding 15 milimetre thick, 10 litre poly vinyl chloride flushing cistern with all necessary pipe connection, excetra complete. (for ground floor)item / page no : 33 / 277additional specifications : the work shall be done as per instructions of engineer in charge. 41 providing and fixing european type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection, excetra complete. (for ground floor)item / page no : 34 / 277additional specifications : the work shall be done as per instructions of engineer in charge. 42 providing and fixing 15 centimetre rigid poly vinyl chloride nahani trap including poly vinyl chloride grating, bend, connecting piece of unplasticized poly vinyl chloride pipe upto the outside face of the wall, making good damaged surface and testing, excetra complete.( prior approval of sample and brand by ex. engr.is necessary before use) (for ground floor)item / page no : 18 / 288specification no : bd.v.32spec. page no : 567additional specifications : prior approval of sample and brand by executive engineer is necessary before use. 43 providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating, excetra complete. (for ground floor)item / page no : 67 / 281specification no : bd.v.32aspec. page no : 551additional specifications : the work shall be done as per instructions of engineer in charge. 44 providing, constructing and fixing 450 milimetre diameter inspection chamber made up of polypropylene / polyethylene material of thickness 3.5 milimetre and height of 388 milimetre with 160 milimetre or 200 milimetre main inlet(s) and outlet 110 milimetre and / or 160 milimetre branch inlets, with 450 milimetre diameter ultra shaft pipe of high density polyethylene material having height of 460 milimetre, having reinforced cement concrete cover and frame fixing in 150 milimetre thick in cement concrete 1:2:4, having crushed sand bed of 150 milimetre thick of size 750 milimetre dia, including excavation and refilling the sides of chamber by sand crushed cushioning 150 milimetre thickness, connecting all required unplasticized poly vinyl chloride fittings with rubber lubricant, excetra complete. (for ground floor)item / page no : 28 / 290additional specifications : the work shall be carried out as per instructions of engineer in charge. 45 providing, laying and fixing, jointing eco-drain 110 milimetre sn 8 nu-drain unplasticized poly vinyl chloride pipes or of equivalent make, manufacture as per en 13476 or equivalent as per indian standard : 15328 with fittings such a bends, tees, coupler, excetra jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material, excetra complete. (for ground floor)item / page no : 30 / 291additional specifications : the work shall be carried out as per instructions of engineer in charge. 46 providing, laying and fixing, jointing eco-drain 160 milimetre sn 4 nu-drain unplasticized poly vinyl chloride pipes or of equivalent make, manufacture as per en 13476 or equivalent as per indian standard : 15328 with fittings such a bends, tees, coupler, excetra jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material, excetra complete. (for ground floor)item / page no : 31 / 291additional specifications : the work shall be carried out as per instructions of engineer in charge. 47 providing and fixing 100 milimetre diameter chromium plated brass shower rose to 15 milimetre diameter supply pipe including necessary bend and sockets complete. (for ground floor)item / page no : 51 / 270specification no : bd.v.12spec. page no : 556 48 provoding and fixing high density polyethylen container one piece moulded water tank made out of high density polyethylen and built corrugated inclusive of delivery upto destination housting, fixing of accessaries such as inlet, outlet, overflow pipe inclusive of all taxes. capacity between 200 litres to 1000 litres. (for ground floor)item / page no : 53 / 280additional specifications : the work shall be done as per instructions of engineer in charge. 49 providing and fixing on walls / celling / floor, 15 milimetre diameter chlorinated polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed excetra complete. (for ground floor)item / page no : 55 / 280specification no : bd.v.5spec. page no : 551additional specifications : the work shall be done as per instructions of engineer in charge. 50 providing and fixing on walls / celling / floor, 20 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed excetra complete. (for ground floor)item / page no : 56 / 280specification no : bd.v.5spec. page no : 551additional specifications : the work shall be done as per instructions of engineer in charge. 51 providing and fixing on walls / celling / floor, 25 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed excetra complete. (for ground floor)item / page no : 57 / 280specification no : bd.v.5spec. page no : 551additional specifications : the work shall be done as per instructions of engineer in charge. 52 providing and fixing on walls / celling / floor, 32 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed excetra complete. (for ground floor)item / page no : 58 / 280specification no : bd.v.5spec. page no : 551additional specifications : the work shall be done as per instructions of engineer in charge. 53 providing and laying in trenches 20 milimetre diameter chlorinated poly vinyl chloride pipe including necessary excavation, fittings, refilling trenches, excetra complete. including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed excetra complete.item / page no : 62 / 281specification no : bd.v.5spec. page no : 551additional specifications : the work shall be done as per instructions of engineer in charge. 54 providing and fixing reinforced cement concrete cover of size 90 centimetre x 45 centimetre with frame over inspection chamber, excetra complete. - heavy duty (225 kilogramme)item / page no : 68 / 281additional specifications : the work shall be carried out as per instructions of engineer in charge. 55 providing and fixing stainless steel sink 600 milimetre x 510 milimetre x 200 milimetre of approved make including coupling, outlet pipe, elbo and other necessary fitting, finishing excetra complete. (for ground floor)item / page no : 78 / 282additional specifications : the work shall be carried out as per instructions of engineer in charge. 56 providing and fixing chromium plated bib cock with wall flange of approved make including necessary sockets / union nut, excetra complete. (for ground floor)item / page no : 83 / 283additional specifications : the work shall be carried out as per instructions of engineer in charge. 57 providing and fixing poly vinyl chloride rain water pipes of 160 milimetre outer diameter and having wall thickness of 2.2 milimetre to 2.7 milimetre confirming to indian standard : 13592-1992 including proper rain water receiving recess with poly vinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall affixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. all the poly vinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge excetra complete. (for ground floor)item / page no : 85 / 283additional specifications : the work shall be carried out as per instructions of engineer in charge. 58 providing and fixing 40 milimetre diameter and 1.5 milimetre thick stainless steel hand railing in stainless steel 304 grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe, excetra complete. (for ground floor)item / page no : 6 / 264additional specifications : the work shall be done as per instructions of engineer in charge. 59 providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 milimetre thickness of having a strength of 300 kilogramme per square centimetre of approved quality and shape on a bed of crushed sand of 25 milimetre to 30 milimetre thick including striking joints and cleaning, excetra complete.item / page no : 51 / 218additional specifications : the work shall be carried out as per instructions of engineer in charge. 60 providing and laying cast in situ / ready mix cement concrete m-15 of trap / granite / quartzite / gneiss metal for steps including steel centering, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (wooden centering will not be allowed.) with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 4 / 175specification no : bd.e.2, b-7spec. page no : 288, 38-40additional specifications : 1. with additional specifications for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 61 providing, constructing 2.0 metre deep shallow depth percolation pit comprising of 1.0 metre diameter pre-cast reinforced cement concrete rings, 300 milimetre thick side filling around outside of reinforced cement concrete rings (annular space) with 40 milimetre size boulders including filling of percolation pit up to 0.5 metre depth (from bottom up) with 25-75 milimetre clean washed gravels followed by 0.5 metre depth of 10-25 milimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand/crushed sand vsi grade finely washed excetra) including netlon mesh between each gravel / fine aggregate (natural sand/crushed sand vsi grade finely washed, excetra) media layer including covering with reinforced cement concrete slab, manhole frame and cover, polyvinyl chloride rungs, excetra including arrangement for inlet and outlet pipe, excavation and backfilling as shown in the drawing. the rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. all material should be of approved make. all works complete as per the drawing, technical specification and direction of the engineer in chargeitem / page no : 46 / 317additional specifications : work shall be carried out as per the instructions of engineer in-charge. 62 providing and fixing 90 centimetre x 60 centimetre granite name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete.item / page no : 12 / 294specification no : bd.w.7spec. page no : 586-587 63 providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on m.s.angle of size 35 milimetre x 35 milimetre x 3 milimetre frame with properly cross braced mild steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including two mild steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures excetraand fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour etc complete. spec. number as directed by engineer in chargeitem / page no : 36 / 60specification no : morth-801spec. page no : ---additional specifications : the work shall be carried out as per instructions of engineer in charge. 64 providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fiber glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats using approved chemicals for masonry and concrete surface by brush, covering seven years gaurantee on stamp paper, excetra complete. (for first floor)item / page no : 9 / 206additional specifications : the work shall be carried out as per instructions of engineer in charge. 65 providing and fixing of colour coated zincalume (r) az 150 (minimum 150 grams per square metre total on each sides) profiled sheets for roofing. the feed material is manufactured out of nominal 0.45 milimetre base metal thickness (bmt) (0.5 milimetre tct), hi-strength steel with minium 550 mpa yield strength, metallic hot dip coated with aluminium-zinc alloy (55 percent aluminium, 43.4 percent zinc, 1.6 percent silicon) with colorbond (r) steel quality super durable polyster paint coat (with inorganic pigment). the paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. the end rib shall be designed for anti capilary groove and return leg. the feed material should have coil manufacturers product details marked at regular interval. including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (weight of profile 4.52 kilogram per square metre). (for ground floor)item / page no : 34 / 236additional specifications : the work shall be done as per instructions of engineer in charge. 66 excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (lift upto 1.5 metre) by mechanical meansitem / page no : 2 / 153specification no : bd.a.1spec. page no : 259 67 excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (lift upto 1.5 metre) by mechanical meansitem / page no : 6 / 153specification no : bd.a.2spec. page no : 259 68 providing and laying cast in situ/ready mix, cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed, excetra) (using artificial sand).item / page no : 1 / 175specification no : bd.e.1spec. page no : 287-288additional specifications : 1. with additional specifications for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 69 providing and laying in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (using artificial sand).item / page no : 11 / 178specification no : bd.f.3, b-7spec. page no : 298, 38-40additional specifications : 1. with additional specifications for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 70 providing and laying cast in situ / ready mix cement conrete m-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (excluding reinforcement and structural steel). with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete.with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 31 / 179specification no : bd.f.5, b-7spec. page no : 300, 38-40additional specifications : 1. with additional specifications for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 71 providing and laying cast in situ / ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel). with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 50 / 181specification no : bd.f.6, b-7spec. page no : 300-301, 38-40additional specifications : 1. with additional specifications for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 72 providing and fixing in position thermo mechnically treated fe-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (for ground floor)item / page no : 33 / 188specification no : bd.f.17spec. page no : 306 73 providing and laying cast in situ / ready mix cement concrete in m-15 of trap / granite / quartzite / gneiss metal for coping to plinth or parapet moulded or chamfered as per drawing or as directed including steel centering, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra complete. (wooden centering will not be allowed.) with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 16 / 177specification no : bd.e.3, spec. page no : 288-289additional specifications : 1. with additional specifications for controlled concrete. 2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 74 providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 6 / 209specification no : bd.l.4spec. page no : 368additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 75 providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 17 / 210specification no : bd.l.15spec. page no : 372additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 76 providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding, if necessary, cleaning and preparing the surface, watering for two days complete. (for ground floor)item / page no : 14 / 224specification no : bd.o.8spec. page no : 408additional specifications : sample and brand is to be got approved from executive engineer before use. 77 providing and fixing road junction / information sign board of size 0.90 metre x 0.60 metre prepared on 16 gauge mild steel sheet with angle iron frame of size 35 milimetre x 35 milimetre x 5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro-reflective sheet engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100 percent reflection including two angle iron post of size 50 milimetre x 50 milimetre x 5 milimetre of 3.65 metre long inflated at bottom drilled on top and painted in white and black bands of 30 centimetre. with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by engineer-in-charge, excetra complete. mild steel board with engineering grade.item / page no : 47 / 64specification no : morth-801spec. page no : ---additional specifications : the work shall be carried out as per instructions of engineer in charge. please enable macros to view boq information