tender for providing special repair work for central school hasur tal-shirol- removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts excetra complete.item / page no : 19 / 297additional specifications : the work shall be carried out as directed by engineer-in-charge. 2 removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts excetra complete.item / page no : 12 / 296additional specifications : the work shall be carried out as directed by engineer-in-charge. 3 providing and laying in situ/ready mix cement concrete m-15 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with natural sand/v.s.i. quality artificial sand (using artificial sand).item / page no : 11a / 178specification no : bd.f.3,b-7spec. page no : 298,38-40additional specifications : 1. with additional specifications for controlled concrete.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 4 providing and fixing in position thermo mechnically treated fe-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (for ground floor)item / page no : 33 / 188specification no : bd.f.17spec. page no : 306 5 providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to indian standard 15622-2006 (group bia) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (for ground floor) (using artificial sand).item / page no : 42 / 217specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 6 providing and fixing solid core flush door commerical type in single leaf 16 milimetre thick bison panel cement bonded partical board including teak wood lipping, beading on all four edges, without ventilator commercial type of exterior grade as per detailed drawings, with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats, excetra complete. (for ground floor)item / page no : 11 / 246additional specifications : the work shall be done as per instructions of engineer in charge. 7 providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 milimetre x 9 milimetre x 3 milimetre minimum size, crossings of mild steel flats of size 18 milimetre x 5 milimetre t or e section for runner of minimum 40 milimetre x 6 milimetre size for flange, mild steel flat for top runner of minimum size 40 milimetre x 12 milimetre with roller wheels confirming to grade f.g. 150 fitted with snap headed rivets of minimum size 6 milimetre, maximum spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting, excetra complete. (indian standard : 10521-1983). (for ground floor)item / page no : 26 / 249specification no : bd.t.57spec. page no : 511 8 providing and fixing steel frame of angle 40 milimetre x 40 milimetre x 5 milimetre size for windows with 16 milimetre diameter mild steel bars horizontally at 10 centimetre center to center for ventilator portion and 15 centimetre center to center for remaining portion with mild steel flats size 40 milimetre x 6 milimetre vertical at center including hold fast and iron oxidised fixtures, boxes for fixing 40 milimetre x 6 milimetre, fixing shutter including welding, finishing, painting, excetra complete. (for ground floor)item / page no : 34 / 250additional specifications : the work shall be done as per instructions of engineer in charge. 9 providing and laying green marble 18 milimetre to 20 milimetre thick for door frame / dado / window boxing excetra on cement mortar 1:6 including filling joints with polymer base filler, nosing / moulding the sharp edges wherever necessary, curing, excetra complete. (for ground floor) (using artificial sand).item / page no : 48 / 218specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 10 providing and fixing in position (as per indian standard 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre x 38.10 milimetre x 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre x 31.75 milimetre x 1.20 milimetre at weight 0.695 kilogram per running metre. top and side track section 61.85 milimetre x 31.75 milimetre x 1.30 milimetre at weight 0.659 kilogram per running metre. the shutter should be of bearing bottom 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre. interlocking secion 40 milimetre x 18 milimetre x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts excetra complete. - with colour anodising without box. (for ground floor)item / page no : 38 / 251additional specifications : the work shall be done as per instructions of engineer in charge. 11 providing and fixing mild steel grill work for windows, ventilator, excetra 20 kilogram per square metre as per drawings including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting, excetra complete. (for ground floor)item / page no : 1 / 264specification no : bd.u.1spec. page no : 537 12 providing and fixing welded mesh of 11 gauge wires having mesh size 50 milimetre x 25 milimetre including mild steel angle frame of size 35 milimetre x 35 milimetre x 5 milimetre in position with oil painting three coats, excetra complete. (for ground floor)item / page no : 79 / 261additional specifications : the work shall be done as per instructions of engineer in charge. 13 providing and applying white wash in two coats on old / new plastered or masonry surfaces and asbetos cement sheets including scaffolding and preparing the surface by brushing and brooming down, excetra complete. (for ground floor)item / page no : 3 / 227specification no : bd.p.1spec. page no : 411 14 providing and applying royale luxury emulsion of approved make on internal wall surface as detailed below - scrapping for surface with emery paper and wipe clean for area. applying wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20 percent allowing to dry for 6 to 8 hours. after applying approved make acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. scrapping with emery paper and wipe clean. applying paints royale luxury emulsion first coat with brush water content water 40 to 45 percent or 65 to 70 percent by role. applying paints royale luxury emulsion second coat with brush with water content 40 to 45 percent or 65 to 70 percent by roller. (with prior approval of s.e.) (for ground floor)item / page no : 21 / 229additional specifications : the work shall be done as per instructions of engineer in charge. 15 laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by vigilence and quality control circle, pune.item / page no : 4 / 0additional specifications : 1. the amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the vigillence and quality control office with the name of work mensioned on it.2. above / below percentage quoted by the contractor will not be applicable for this item. 16 providing and fixing 90 centimetre x 60 centimetre granite name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete.item / page no : 12 / 294specification no : bd.w.7spec. page no : 586-587 17 providing second class burnt brick masonry with conventional / indian standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. (for first floor) (using artificial sand).item / page no : 5 / 197specification no : bd.g.5spec. page no : 315additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 18 providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (for first floor) (using artificial sand).item / page no : 7 / 209specification no : bd.l.4spec. page no : 368additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 19 providing and laying cast in situ / ready mix cement concrete m-20 of trap metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel). with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with fine aggregate of natural sand/v.s.i. quality artificial sand (for first floor) (using artificial sand).item / page no : 5 / 184specification no : bdf-9,b-7spec. page no : 303-304,38-40additional specifications : 1. with additional specifications for controlled concrete.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 20 providing and laying cast in situ / ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel). with fully automatic micro processor based programmable logic controller without supervisory control and data aquisition enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (for ground floor) (using artificial sand).item / page no : 50 / 181specification no : bd.f.6,b-7spec. page no : 300-301,38-40additional specifications : 1. with additional specifications for controlled concrete.2. if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 21 providing and fixing in position thermo mechnically treated fe-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (for first floor)item / page no : 33 / 188specification no : as per item no 4spec. page no : ---additional specifications : as per item no 4 22 providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (for first floor)item / page no : 2 / 264specification no : bd.u.1spec. page no : 537 23 providing and fixing mild steel grill door 24 kilogram per square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and three coats of oil painting, excetra complete. (for first floor)item / page no : 31 / 250additional specifications : the work shall be done as per instructions of engineer in charge. 24 providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to indian standard 15622-2006 (group bia) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (for first floor) (using artificial sand).item / page no : 42 / 217specification no : as per item no 5spec. page no : ---additional specifications : as per item no 5 25 providing and fixing in position (as per indian standard : 1868/1982) aluminium sliding window of three tracks with rectangular pipe having overall dimentsions 95 milimetre x 38 milimetre x 0.90 milimetre at weight 0.637 kilogram per running metre and window frame bottom track section 92 milimetre x 31.75 milimetre x 1.30 milimetre at weight 1.070 kilogram per running metre. top and side track section 92 milimetre x 31.75 milimetre x 1.30 milimetre at weight 0.933 kilogram per running metre. the shutter should be of bearing bottom 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre. interlocking secion 40 milimetre x 18 milimetre x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre x 18 milimetre x 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts excetra complete. - with colour anodising with box. (for first floor)item / page no : 41 / 253additional specifications : the work shall be done as per instructions of engineer in charge. 26 providing and applying white wash in two coats on old / new plastered or masonry surfaces and asbetos cement sheets including scaffolding and preparing the surface by brushing and brooming down, excetra complete. (for first floor)item / page no : 3 / 227specification no : as per item no 13spec. page no : ---additional specifications : as per item no 13 27 providing and applying royale luxury emulsion of approved make on internal wall surface as detailed below - scrapping for surface with emery paper and wipe clean for area. applying wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20 percent allowing to dry for 6 to 8 hours. after applying approved make acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. scrapping with emery paper and wipe clean. applying paints royale luxury emulsion first coat with brush water content water 40 to 45 percent or 65 to 70 percent by role. applying paints royale luxury emulsion second coat with brush with water content 40 to 45 percent or 65 to 70 percent by roller. (with prior approval of s.e.) (for first floor)item / page no : 21 / 229specification no : as per item no 14spec. page no : ---additional specifications : as per item no 14 28 insurancenon-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge. 29 g s tnon-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge.