tender for tourism development & beautification work in garden at sai garden, akurli road, alika nagar, kandivali-excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 3.00 m.) by mechanical means providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. providing and laying cast in situ/ready mix cement concrete m-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.) with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) providing and fixing 90 cm x 60 cm granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete providing & fixing kerb stones 30cm to 40 cm long, 15cm wide, 38cm deep medium dressed in all exposed surfaces, set in cement mortar 1:2 on a 15cm thick & 25cm wide rmc m-10 cc bed including filling the joints with 1:2 c.m. pointing, curing etc. complete. providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 mm thickness of having a strength of 300 kg/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. providing and fixing vip bench of size 1.5 x 0.6m, the stand shouldbe made up of cast iron in casting process top seating portion and backrest portion is made up of frp pultrusion process stirups fitted with ss ( non rusting ) nut bolt 10mm and nylon cap the bench should contain name plate of size 9 x 2 of matter to be painted as directed bye site in charge the main frame of aero rider is made from 80 nb & 40 nb galvanized pipe with powder coating of minimum 60 micron thickness. handle support pipe linked to seat via 25 nb galvanized pipe. handle pipe consists of grip of 20 nb g.l. pipes with suitable pvc grip. handle pipe extended to connect foot grip of 25 nb & 20 nb g.l. pipes via 40 nb galvanized pipe. the handle support pipe is pivoted over 80nb support pipe with zinc plated rectangular tube. the hdpe/ lldpe/ frp seat rest over the 75x10 mm m.s. flat with g.l. plating hinged over the 80nb main frame pipe with the help of heavy duty bush bearing. all pipe are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. 25 nb galvanized pipe bend to form ring and spokes consists of 20 nb g.l. pipes that connect to each other to form a wheel of shoulder twirl. this wheel is fixed to 80 nb main support gavlanized pipe with the help of 40 nb connector pipe with specially designed bearing. bearing used are oil sealed, self -lubricated made by reputed company. all pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. handle for rotating the ring fixed over the pipe ring. (fme code- fair -9)the main frame of hlptwister consists of 80 nb g.l. pipes with handle attached on it. handle pipe is made up of 25 nb g.l. pipe with suitable rubber grip attached at both ends the rotating disc made from frp / hdpe / lldpe plastic is supported over 80 nb g.l. pipe with the help of heavy duty bearing. this disc is bolted to main frame with the help of 40 nb g.l. pipe. all pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment frp/ hdpe/ lldpe (fiber reinforced plastic/high density poly ethylene / linear low density poly ethylene ) seat with backrest is fixed over 40 nb galvanized bend pipe. this bend pipe is further attached to 100 nb main supporting pipe. the paired 25 nb pipe handle with rubber grip at the end is fixed over 40 nb pipe frame. the rolling frame is made by 40 nb & 20 nb g.l. pipes. rolling frame is hinged at the one end of 40 nb bend pipe frame with specially designed bush bearing. a suitable pvc / rubber grip is provided for foot rest on rolling frame. all pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. handle for rotating the ring fixed over the pipe ring. supplying and installing of (wave slide 1.50 mtr ht) as directed by engineer-in-charge . supply & installing multi seater see-saw as directed by engineer in-charge supplying & fixing of double swing with belt assembly) maps) etc. complete as directed by engineer in chargepreparing lawn- excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to required distance as directed. filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. (tank slit, manure and sand in 3:1 proportion to a height of 30cms mixing garden soil & manure thoroughly, well, leveling, watering on previous night planting required variety of lawn grass as directed & maintaining till well established by watering, weeding, clipping, rolling etc. complete . preparing shrubbery :- excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to required distance as directed. filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. mixing garden soil & manure thoroughly, well, leveling, and watering on previous night planting well established by watering, weeding, stirring replacing casualties etc. complete . supplying & planting plants golden duranta 6 to 9 height excluding pollybag etc. complete as directed engineer-in-charge supplying & planting of lxora chinensis cv. sunkist ixora nana red 6 to 9 height excluding pollybag etc. complete as directed engineer-in-charge supplying and planting of heliconia metallica red leaf heliconia 6 to 9 height excluding pollybag etc. complete. as directed by engineer-in-charge supplying and planting of zafer lily 6 to 9 height excluding pollybag etc. complete. as directed by engineer-in-charge providing, fabricating and fixing m.s. grill work as per approved design and as per weight specified below to fencing / compound mades out of square / round bars, m.s. flats, angles, with necessary holdfast including painting with one coat of red oxide zinc chromate primer and two coats of approved synthetic enamel paint etc. complete as directed by engineer in charge.mild steel grill of weight 20 to 25 kg/sq. m. removing any kind of debris including loading in truck and conveying to approved dumping point beyond mcgm limits unloading, spreading etc. complete. (note: rate to be reduced proportionately, if lead is within 50km.) royalty charges for rubble & sand as per statement. providing basic test of cement:- fineness (by sieving), soundness by le-chateliers test, setting time (initial & final), compressive strength test, standard consisitency basic test of aggregate : water absorption, specific gravity, impact, value/ crushing value. (one bag of 15kg.) providing basic test of fine aggregate /sand:-silt & clay content, fineness modulus test ( sieve analysis ),(5kg.) testing charges of brick water absorption compressive strength, efflorescence,(set of 15 no. bricks) concrete paving blocks:-compressive strength, water absorption,(set of 11 blocks)