providing fixing gym equipment at midc police station, police station, andheri ( e ) -removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.providing and laying cast in situ / ready mix cement concrete in m15 of trap / granite / quartzite / gneiss metal for steps including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. ( wooden centering will not be allowed. ) , with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with fine aggregate ( natural sand / crushed sand vsi grade finely washed etc ) , providing and fixing 90 cm x 60 cm granite plate engraving 10 cm. height letter, figures including painting the lefters / figures with approved colour and shade complete, the main frame of aero rider is made from 80 nb & 40 nb galvanized pipe with powder coating of minimum 60 micron thickness. handle support pipe linked to seat via 25 nb galvanized pipe. handle pipe consists of grip of 20 nb g.l. pipes with suitable pvc grip. handle pipe extended to connect foot grip of 25 nb & 20 nb g.l. pipes via 40 nb galvanized pipe. the handle support pipe is pivoted over 80nb support pipe with zinc plated rectangular tube. the hdpe / lldpe / frp seat rest over the 75x10 mm m.s. flat with g.l. plating hinged over the 80nb main frame pipe with the help of heavy duty bush bearing. all pipe are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment, frp / hdpe / lldpe ( fiber reinforced plastic / high density poly ethylene / linear low density poly ethylene ) seat with backrest is fixed over 40 nb galvanized bend pipe. this bend pipe is further attached to 100 nb main supporting pipe. the paired 25 nb pipe handle with rubber grip at the end is fixed over 40 nb pipe frame. the rolling frame is made by 40 nb & 20 nb g.l. pipes. rolling frame is hinged at the one end of 40 nb bend pipe frame with specially designed bush bearing. a suitable pvc / rubber grip is provided for foot rest on rolling frame. all pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. handle for rotating the ring fixed over the pipe ring etc