providing fixing sitting arrangement & electrification in mahanagar palika open ground, near mahaveer nagar, kandivali ( w ) ( 152-borivali constituency ) .- providing / fixing open gym equipment & children equipments beside open plot mahaveer nagar, pawan dham, borivali ( w ) ( 152- borivali constituency ) .- ex. engr. 13.65 excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( lift upto 1.5 m. ) 6.83 providing dry / trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 4.55 providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with natural sand / v.s.i. quality artificial sand 1.00 providing and fixing 90 cm x 60 cm granite plate engraving 10 cm. height letter, figures including painting the lefters / figures with approved colour and shade complete ex. engr. 45.50 providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding i.s. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 1.00 the main frame of aero rider is made from 80 nb & 40 nb galvanized pipe with powder coating of minimum 60 micron thickness. handle support pipe linked to seat via 25 nb galvanized pipe. handle pipe consists of grip of 20 nb g.l. pipes with suitable pvc grip. handle pipe extended to connect foot grip of 25 nb & 20 nb g.l. pipes via 40 nb galvanized pipe. the handle support pipe is pivoted over 80nb support pipe with zinc plated rectangular tube. the hdpe / lldpe / frp seat rest over the 75x10 mm m.s. flat with g.l. plating hinged over the 80nb main frame pipe with the help of heavy duty bush bearing. all pipe are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. 1.00 25 nb galvanized pipe bend to form ring and spokes consists of 20 nb g.l. pipes that connect to each other to form a wheel of shoulder twirl. this wheel is fixed to 80 nb main support gavlanized pipe with the help of 40 nb connector pipe with specially designed bearing. bearing used are oil sealed, self -lubricated made by reputed company. all pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. handle for rotating the ring fixed over the pipe line. ex. engr. 1.00 the main frame of hlptwister consists of 80 g.l. pipes with handle attached on it. handle pipe made up of 25 nb g.l. pipe with suitable rubber attached at both ends the rotating disc made from frp / hdpe / lldpe plastic is supported over nb g.l. pipe with the help of heavy duty bearing. this disc is bolted to main frame with the help of nb g.l. pipe. all pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. all open ends of pipe been closed by hdpe caps for user safety against entrapment 1.00 frp / hdpe / lldpe ( fiber reinforced plastic / high density poly ethylene / linear low density ethylene ) seat with backrest is fixed over 40 galvanized bend pipe. this bend pipe is further attached to 100 nb main supporting pipe. the paired 25 nb pipe handle with rubber grip at the end fixed over 40 nb pipe frame. the rolling frame made by 40 nb & 20 nb g.l. pipes. rolling frame hinged at the one end of 40 nb bend pipe frame specially designed bush bearing. a suitable pvc rubber grip is provided for foot rest on rolling frame. all pipes are uniformly powder coated up minimum 60 micron thickness to avoid corrosion. open ends of pipe been closed by gl / hdpe caps for user safety against entrapment. handle rotating the ring fixed over the pipe ring. 1.00 80 nb galvanized main vertical support pipe fixed over square tube of 25 x 25 mm bottom frame frp hdpe / lldpe seat fixed over rectangular tube 80 x 40 mm with zinc ploting for corrosion resistance. this seat frame is hinged over vertical support pipe through 40 nb galvanized pipe links with the help of specially designed bush bearing the handle pipe consists of 25 nb galvanized pipe with rubber handle grip at its both ends handle is linked to the seat with 40 nb pipe which is hinged to main vertical support pipe with the help of specially designed bush bearing. all pipe are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion all open ends of pipe been closed by gl / hdpe caps for user safety against entrapment 1.00 providing and fixing animal merry go round as directed by engineer-in-charge . 1.00 supply & installing multi seater see-saw as directed by engineer in-charge 1.00 supplying and installing of wave slide 1.5 mtr ht ) as directed by engineer-in-charge . 1.00 supplying & fixing of double swing with belt assembly ) maps ) etc. complete as directed by engineer in charge 1.00 supplying and installation of spiral climber 2.1 mtr. ( maps ) as per specification as directed by engineer in charge 8.00 providing and fixing vip bench of size 1.5 x 0.6m, the stand shouldbe made up of cast iron in casting process top seating portion and backrest portion is made up of frp pultrusion process stirups fitted with ss ( non rusting ) nut bolt 10mm and nylon cap the bench should contain name plate of size 9 x 2 of matter to be painted as directed bye site in charge 3.419 removing any kind of debris including loading in truck and conveying to approved dumping point beyond mcgm limits unloading, spreading etc. complete. ( note: rate to be reduced proportionately, if lead is within 50km. ) 11.24 royalty charges for rubble & sand& soil as per general note no. 4.3 1.00 testing charges of cement : standard consistency, fineness, specific gravity, setting time ( initial & final ) , compressive strength, soundness 1.00 basic test of aggregate : water absorption, specific gravity, impact, value / crushing value. 1.00 fine aggregates: fineness modulus ( sieve analysis ) , silt & clay content 1.00 flooring tiles ( mossaici cement ) :- flexural test ( set of 6 tiles ) , water absorption ( set of 6 tiles ) .resistance to wear ( set of 6 tiles ) .