different maintenance and repairing running work in the area of e.u.d.s.d.-rajajipuram-i & ii under e.u.d.d-rajajipuram, lesa, lucknow- 1 safe carriage, loading and unloading of following material from esc daliganj, lucknow to work site / j.e. dump store. 2 pcc pole 8.5 / 9 mtr. long. 3 s.t.p. pole 9 / 11 mtr. long. 4 fabrication and erection of missing / damaged wire mesh fencing 02 mtr. height with a gate and with retaining wall including grouting of fabricated m.s. angle 65x65x6 mm. support ( 05 nos. in a sub-station ) . painting of fencing / support with all material as per specification / drawing complete in all respect. 5 repairing of damage / rustedsteel tubular pole by digging of pil up to 2 for proper position, putting 3 nos angle from of size 35x35x6 mm, 3 long properly welding on 3 circle with pole than grouting and plinthing 300 mm above level with cement concrete sand sand and bricks ballast, ( all material, labourand t&p will be providedby the contractor ) 6 erection, grouting & plinthing of single pole structure on stp / pcc long with fixing of necessary clamps and other accessories required as per respo norms. painting of poles with primer and enamel paint as per respo specification complete in all respect. 7 re-sagging of existing l / t, o / h , abc line opening of abc on service point and opening of consumer service cable after re-sagging of abc re connection of consumer services cable on st pole / pcc. ( all the material will be arranged by the contractor ) 8 grouting and nozzeling of stay set complete of size 16x1800 mm. with cement, sand, brick-ballast 1:3:6 as per respo specification. ( all the material will be arranged by the contractor ) 9 1 material provided by department - s.t.p., p.c.c. etc.2 material provided by contractor -all civil material, nust & bolts and other pettey items required for completion of work. note:-1 all the material required for painting and wiring work shall be as provided by contractor as per norms of uppcl / respo.2 during executioon of work all risk will be of contractor.3 contractor will provide all t & p and men power for completion of work.4 all the old and used stock material be received back and tacken on book by j.e..5 gst will be paid extra as legally applicable6 the quantity may be vary ±10%.