the work against sanctioned package no. 71 / 2020-21 ( under deposit scheme ) under electricity urban distribution division-iv, gorakhpur-2 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking :- 3 3x70 mm² xlpe 11 kv cable 4 3x185 mm² xlpe 11 kv cable 5 lt xlpe cable 3.5x240 mm² 6 s.t. pole 11 mtr. long 7 acsr weasel conductor 8 11 kv top channel 9 11 kv t-off channel 10 11 kv disc insulator with fitting 11 11 kv pin insulator with pin 12 stay complete 13 earthing complete 14 11 kv 3x185 mm² xlpe cable jointing kit indoor/outdoor 15 11 kv 3x70 mm² xlpe cable jointing kit indoor/outdoor 16 lt 3.5x240 mm² xlpe cable jointing kit indoor/outdoor 17 11 kv vcb og ctr 200/100/5a, 350 mva 18 11 kv fuse set complete 19 11 kv dropper angle 20 11 kv ppmc(30/5a) 21 11 kv electronic tvm meter 22 11 kv ct/pt metering pole mounting unit (30/5a) 23 supply of following material/fitting complete in all respect- 24 hdpe pipe 110 mm dia pn-6 pe-80 with elbow and socket for 11 kv cable 25 hdpe pipe 160 mm dia pn-6 pe-80 with elbow and socket for 11 kv cable 26 6 inch dia g.i. pipe 3m long 27 cable marker of rcc dimension (1200 mmx200mmx80mm) 28 holding clamps 29 lt clamps for st pole 30 nut & bolt 31 the excavation of 2 nos. foundation pit of size 750mmx450mm and having depth of 1/6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories (top channel, dropper angle etc.) as per required. all required materials such as holding clamp/stp clamp, nuts & bolts off size etc will be provided by the contractor. ngrouting of pole in cc 1:4:8 (cement, sand & 40 mm brick ballast), grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (material provided by contractor). nmaking plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. nall work will be done as per respo norms & relevant is specification. 32 laying of hdpe pipe 110 mm diameter for laying of 11 kv 3x70 sq mm xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm 33 laying and dressing of under ground 11 kv 3x70 sq mm xlpe cable (double circuit 980x2=1960 mtr.) into hdpe pipe 110 mm by horizontal drilling method as per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site requirement. 34 laying of hdpe pipe 160 mm diameter for laying of 11 kv 3x185 sq mm xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm 35 laying and dressing of under ground 11 kv 3x185 sq mm xlpe cable (double circuit 100x2=200 mtr.) into hdpe pipe 160 mm by horizontal drilling method as per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site requirement. 36 laying of hdpe pipe 160 mm diameter for laying of lt 3.5x240 sq mm xlpe cable by horizontal drilling method. the hdpe pipe shall be of pe 80 grade with pressure rating pn6 conforming to is 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm 37 laying and dressing of under ground lt 3.5x240 sq mm xlpe cable (double circuit 100x2=200 mtr.) into hdpe pipe by horizontal drilling method as per respo norms. the depth of horizontal drilling shall be between 2 to 3 meters or as per site requirement. 38 errection of 11 kv 3x70 mm² xlpe cable jointing kit indoor/outdoor with complete work 39 errection of 11 kv 3x185 mm² xlpe cable jointing kit indoor/outdoor with complete work 40 errection of lt 3.5x240 mm² xlpe cable jointing kit indoor/outdoor with complete work 41 installation, commissioning & testing of 11 kv vcb vcb og ctr 200/100/5a, 350 mva including making plinth and foundation of vcb. complete all connection in all respect. 42 fabrication and erection of cable marker of rcc of dimension 1200 mmx200 mmx80 mm (complete work) 43 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire (complete work) 44 painting of pole by double coating aluminum & red oxide paint. paint will be provided by contractor 45 earthing of st pole by ms earthing rod & 6 swg earthing wire as per respo norms. 46 erection of 11 kv fuse set complete 47 erection of 11 kv ppmc (30/5a) along with 1 nos. ct/pt pole mounting unit & 2 no. tvm meter 48 earthing of ppmc (30/5a) 49 earthing of ct/pt unit 50