work against sanctioned package no. 146 / 2020-21 & 148 / 2020-21 ( under deposit scheme ) under electricity urban distribution division-i / iv, gorakhpur-1 loading, unloading and safe carriage of following materials from store centre, gorakhpur to je dump store and je dump store to work site with proper stacking- 1, 01 11 kv xlpe 3x70 sq.mm. 1, 02 jointing kit for 11 kv xlpe 3x70 sq.mm. 1, 03 t / f11 / 0.4kv 63 kva 1, 04 s.t pole 11mt. long 1, 05 11 kv droper channel 1, 06 11 kv disc insulater with fitting 1, 07 11 kv top channel 1, 08 11 kv s / s angle 1, 09 11 kv pin insulator with pin 1, 10 acsr weasel conductor 1, 11 earthing complete 1, 12 11 kv tpmo set 1, 13 stay set complete 1, 14 11 kv ppmc ( 50 / 5 a ) 1, 15 11 kv electronic tvm 1, 16 11 kv ct pt metering pole mounting unit 50 / 5a 2 the excavation of 2 nos. foundation pit of size 750mmx450mm and having depth of 1 / 6th of the full length of the pole. fabrication & erection of double pole with fixing of necessary clamps & accessories ( top channel, dropper angle etc. ) as per required. all required materials such as holding clamp / stp clamp, nuts & bolts off size etc will be provided by the contractor. grouting of pole in cc 1:4:8 ( cement, sand & 40 mm brick ballast ) , grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc ( material provided by contractor ) . making plinth around pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. all work will be done as per respo norms & relevent is specification. 3 erection and grouting of stay in cc ratio 1:4:8 of cement, sand and stone ballast including cost of grouting material with nozelling and binding of stay wire ( complete work ) 4 painting of pole with aluminium paint & red oxide paint provided by contractor 5 earthing of st pole by ms earthing rod & 6 swg earthing wire as per respo norms. 6 laying of parallel 11 kv 3x70 sq.mm. xlpe cable ( 1x40+70x2=180 mtr. ) by hdd method as per respo norms. 7 laying of parallel 11 kv 3x70 sq.mm. xlpe cable ( 70x2=140 mtr. ) by digging of trench of size 800 mm wide 1250 mm deep and boxing with brick, sand, stone slab 600x450x50 mm, width between 11 kv cable 600 mm. ( other necessary materials excluding 11 kv 3x70 sq.mm. xlpe provided by contractor ) . work will be done as per provision of is 1255:1983 8 errection of cable jointing kit & hoisting of cable on double pole using g.i. pipe 4dia 3 mtr. long ( g.i. pipe 4 dia and other necessary materials excluding 11 kv xlpe cable 3x70 mm² provided by contractor ) 9 errection of cable jointing kit 10 fabrication, errection, commissioning & testing of t / f on double pole with all accessories including make its lt and ht connection. all necessary materials such as holding clamp, al.lugs ( confirming to is 8309 ) , z clamp, nuts & bolts will be supplied by the contractor. 11 chemical earthing of transformer ( body+neutral ) as per is code 3043 - 1987 specification 12 errection of tpmo 13 errection of ppmc ( 50 / 5 a ) along with 2 nos. 11 kv electronic tvm meter 14 earthing of ppmc 15 errection of 11 kv ct pt metering pole mounting unit 50 / 5a