tender for director pensioners pensioners welfare department regional furniture other vikas work 4 nit 30-2 providing and fixing anodized aluminium work ( anodizing to be got done from approved anodizer ) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to is : 733 and is : 1285 anodised transparent 81 dyed to required shade according to is : 1868. ( minimum anodic coating of grade ac 15 ) , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up of gas at junctions, at top, bottom and sides with required pvc / neoprene felt etc.; aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, al. tower bolt & al. handle & al. aldrop etc. all complete as per architectural drawings and the directions of engineer-in-charge. ( glazing and paneling to be paid for separately ) . 3 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvc / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge ( cost of aluminium snap beading shall be paid in basic item ) . with tinted glass panes of 5.0 mm thickness ( weight not less than 13.75 kg. / sqm ) . 4 providing and fixing aluminium composite panel 5 mm thick by using 0.5 mm thick aluminium foil and 5 mm thick reflactive glass ( sand bobbin ashi india or equivalent ) and framing of 2 mm thick aluminium section of 50 x 50 mm size silicon & glazing tap etc. complete up to iiirdfloor, pattern as approved by engineer in charge. 5 plaster on new surface on walls in cement sand mortar 1 : 3 including racking of joints etc. complete fine finish. 20 mm thick 6 providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete birla / j.k. / nerolac or iso. as per direction of engineer in charge. 7 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : two or more two coats on new work including preparation of base with primer, putty, lippy complete in all respect. 8 providing visitors chairs medium back premium leatherite chair hight adjustment gas lift 5 prong chrome plated steel base fitted with lock type twin wheel castors for easy movement. steel arm rest with leatherite covering. single seat and back cushioned with high density foam and upholstered in leatherite torsion bar mechanism of approved design complete as per architect design and drawing approved by engineer-in-charge. 9 providing wooden table for reception counters / officers chambersof approved design with 19mm solid core board isi marked water proof and 1mm thick mica at top and inside, front having combination pattern with metalic laminate as per design and drawing of architect as per design and drawing approved by engineer in chargetable with 8 length 2 width and 26 height as per design of architect ( counter top area to be measured for payment )