tender for aluminum partition and glazing works; 1 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. ( glazing, paneling and dash fasteners to be paid for separately ) :for fixed portion, powder coated aluminium ( minimum thickness of powder coating 50 micron ) 2 for shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 3 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. pre-laminated particle board with decorative lamination on both sides 4 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 5 mm thickness ( weight notless than 12.50 kg / sqm ) 5 providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete. 6 providing and fixing aluminium round shape handle of outer dia 100 mm with ss screws etc. complete as per direction of engineer-in-charge. anodized ( ac 15 ) aluminium 7 replacement of existing aluminium frames. 8 providing & fixing of homogenous vinyl flooring 2.00 mm thick anti static, anti microbial ( bacteria / fungus ) , no wax, no polish, phthalate free, low voc type suiteable for use in hospitals / labs etc of armstrong / gerfloor / progressive / lgincluding cost of adhesive of approved quality , pvc welding of all joints and as per approved colour by engineer-in-charge. => limited