tender for aluminium glass partition work.; 1 aluminium glass partition work 2 providing and fixing 14 gauge aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, paneling and dash fasteners to be paid for separately) : powder coated aluminum (minimum thickness of powder coating 50 micron) as per approved colour and drawing. 3 providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board grade l type ll or 5½ mm composite paneling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. pre-laminated particle board with decorative lamination on both sides. as per approved colour and drawing. 4 providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (cost of aluminum snap beading shall be paid in basic item): with float glass panes of 8 mm thickness as per approved colour and drawing. 5 decorative l drops hydraulic door closer, lock, and stopper and handle complete set.