tender for special repair to hatabasta asanapalli road for the year 2025-26.; 1 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of engineer-in-charge. 2 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified materials with in all lifts and lead upto 1000 metres etc complete as per direction of e.i.c. 3 re-working of scarified bituminous surface suitable after supplementing base materials with sand & compacting finished surface as per technical specification & as per clause - 601.8.3.2 of mosrt&h specifications for road & bridge works (latest revision) complete as per direction of e.i.c. 4 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of morth specificationfor road & bridge works (4th revision). wbm grade - iii using stone screened dust 5 providing and applying primer coat withpenetration grade of bitumen emulsion using bitumen pressure distributorincluding all cost, carriage, royality, taxes of materials etc. complete as per direction of e.i.c. 6 providing & applying tack coat over the bituminous surface with bitumen boiler fitted with spray set using 0.20kg / sqm. area including clearing the surface etc. complete for finished item of work induding cost, conveyance, royalty, taxes, labour, t&p, all other matermls required for the work etc. complete as per direction of the engineer-incharge. 7 providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of mosrt&h specifications for road & bridge works (4th revision) complete as per direction of e.i.c. 8 providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c.