reconstruction of water maintenance store chowky in e ward - demolishing brick work in lime or cement mortar including plaster, paint, etc. 2 excavation for foundation, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in 3 providing & laying dry stone rubble soling 4 providing and laying in position plain cement concrete of specified garde 1:3:6 5 brick work with common burnt clay f.p.s. (non modular) bricks above in superstructure. 6 providing and applying 20 mm thick internal plaster with white cementicious wall putty 7 providing and applying 25 mm thick external sand facedcement plaster upto 10m 8 providing and laying polished natural stone as specified below (machine cut) of 9 18mm thk. jet black granite frame(150mm) 10 providing and fixing in position two track aluminum window of extruded modular andanodized aluminum 11 providing and fixing best quality c.p. teak wood frame 12 p/f flush commercial door shutter 13 p/f 1mm thick laminate ( both dide) 14 stainless steel hinges 100 mm long 15 staineless steel aldrops 300 mm long 16 steel tower bolt 150 mm long. 17 steel handles 150 mm long 18 white vitreous china wash basin size 550x400 mm 19 p/f cpvc pipes 15 mm dia 20 p/f brass bib cock 15 mm 21 p/f brass stop cock 15 mm 22 p/f nahani trap 100 mm. 23 providing and fixing ball valve (brass) of approved quality:-15mm 24 providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint 25 providing and applying first single coat of approved primer andtwo coats of waterproof cement paint of an approved makeand colour as per manufacturers specifications to any surface,upto 10m height from ground level and at all locations asdirected including preparing surfaces for painting by anyapproved means, scaffolding, cleaning and curing etc.complete as directed by engineer-in-charge 26 providing and fixing 6 mm thick non-asbestos high impact polypropylenereinforced cement corrugated sheet of approved make conforming to is:14871-2000 27 p/f m. s. black pipes for 75 mm dia 28 providing and fixing ms safety gril 29 providing and fixing g.i. crimped wire mesh of requiredopenings of size 25 mm x25 mm or of any size with main and cross wires of 10 gauge approved type as per manufacture’s specifications with necessary fittings including painting with one coat of one coat of red oxide zinc chromate primer and two coats of approved synthetic enamal paint etc. complete as directed by engineer in charge. (iron works will be paid separately. the clear visible area of the wire meshexclusive overlap will be paid for). 30 providing, detailing, & fabricating as per specifications,transporting to site & erecting ms openable / sliding / ornamentalentrance gates including track & wheel, locking arrangement, fixingbolts, nuts,