tender for repairs to encroachment dept. in e ward. - excavation by chiseling by manual operations, pneumatic breaker, hammer,drilling, 2 providing & laying dry stone rubble soling 3 providing and laying in position plain cement concrete of specified garde 1:3:6 4 lintels, beams, plinth beams, girders, floor beam, coping. 5 providing and fixing in position steel bars reinforcement ofvarious diameters for r.c.c. lintels 6 brick work with common burnt clay f.p.s. (non modular) bricks above in superstructure. 7 providing and applying 20 mm thick internal plaster with white cementicious wall putty 8 providing and applying 25 mm thick external sand facedcement plaster upto 10m 9 providing and laying polished natural stone as specified below (machine cut) of 10 18mm thk. jet black granite frame(150mm) 11 providing and fixing in position two track aluminum window of extruded modular andanodized aluminum 12 providing and fixing best quality c.p. teak wood frame 13 p/f flush commercial door shutter 14 p/f 1mm thick laminate ( both dide) 15 stainless steel hinges 100 mm long 16 staineless steel aldrops 300 mm long 17 steel tower bolt 150 mm long. 18 steel handles 150 mm long 19 white vitreous china wash basin size 550x400 mm 20 p/f cpvc pipes 15 mm dia 21 p/f brass bib cock 15 mm 22 p/f brass stop cock 15 mm 23 p/f nahani trap 100 mm. 24 providing and fixing ball valve (brass) of approved quality:-15mm 25 providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint 26 providing and applying first single coat of approved primer andtwo coats of waterproof cement paint of an approved makeand colour as per manufacturers specifications to any surface,upto 10m height from ground level and at all locations asdirected including preparing surfaces for painting by anyapproved means, scaffolding, cleaning and curing etc.complete as directed by engineer-in-charge 27 providing and fixing 6 mm thick non-asbestos high impact polypropylenereinforced cement corrugated sheet of approved make conforming to is:14871-2000 28 p/f m. s. black pipes for 75 mm dia 29 providing and fixing ms safety gril 30 providing and fixing g.i. crimped wire mesh of requiredopenings of size 25 mm x25 mm or of any size with main and cross wires of 10 gauge approved type as per manufacture’s specifications with necessary fittings including painting with one coat of one coat of red oxide zinc chromate primer and two coats of approved synthetic enamal paint etc. complete as directed by engineer in charge. (iron works will be paid separately. the clear visible area of the wire meshexclusive overlap will be paid for). 31 aluminum section used 32 12mm thick novapan sheet conforming to is:2835-1991