tender for creation of cabin and other allied work in e ward- 1 brick work with common burnt clay f.p.s. (non modular) bricks above in superstructure. 2 providing and applying 20 mm thick internal plaster with neeru finish by us 3 providing & fixing full height both side laminated partition at required location having height more than 2.8 meter & minimum 77 mm thick 4 fabrication, supply & installation of ms portable cabin on site as per the design drawing provided by the engineer of minimum height 11’ and made of follow 5 providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfacesspecifird below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by engineer-in-charge. 6 extra over item no. cs-pn-3 to cs-pn-6 for preparing and finishing plastered wall surfaces / concrete surfaces, steel or wood surfaces in line and level for acrylic (oil bound)distemper/ synthetic . 7 providing and fixing best quality c.p. teak wood frame 8 p/f flush commercial door shutter 9 p/f 1mm thick laminate ( both dide) 10 stainless steel hinges 100 mm long 11 staineless steel aldrops 300 mm long 12 steel tower bolt 150 mm long. 13 steel handles 150 mm long 14 providing and fixing door stopper as describedbelow of approved make ma 15 providing & fixing premium qualityroller blinds 16 providing and fixing wall paper / graphic for highlighting the walls withproper adhesive 17 providing & fixing false ceiling of india gypsum or equivalent pvc laminated polyshield ceiling syst 18 providing & fixing full height one side laminated one side gypsum board partition 19 providing and fixing mortise lock of approved make manufactured as per is:2209 and 6607 and as described b