tender for material provider for pathkothi under sinhagad road regional office.-item no: 1 supplying hard murum kankar at the road site, including conveying and stacking complete. (ssr item no: 2.29a) (pmc road) unique no (103) rate list year (2023-2024) item no: 2 supply & fixing precast cement concrete cylindrical bollard of size as per specifications & 600 mm height (450mm above finish level) manufactured by m-30 grade of concrete by vibro compaction process using frp moulds & with washed fine grit finish on the exposed surface of the bollard of approved water base pu paint colour ture, (single & double strip) as per detal drawing as directed by engineer in charge. (ssr item no: 1.07) (pmc road) unique no (201) rate list year (2023-2024) item no: 3 supplying and fixing of malded shank raised pavement markers / cats eye made of polycarbonate and abs moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to astm d 4280 type h and complying to specifications of category a of morth circular no rw/nh/33023/10-97 do iii di 11.06. 1997. the height, width and length shall not exceed 50 mm, 100 mm and 102 +/-2 mm and with mum reflective area of 13 sqcm on each side and the slopee base shall be 35+/-5 degree. the strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19-2 mm and height not less than 30+/-2 mm) from the body is to be a minimum value of 500 kg. fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the engineer. (ssr item no: 6.09) (pmc road) item spec: (morth 804) unique no (248) rate list year (2023-2024) etc