tender for the electrification work of 03 no. payjal yojana at vill. pailani dera, amchauli, nandadev etc. under edd, banda ( rural ) - 1 the following works under various places / sub-stations under full deposit scheme 2023-24 under edd, banda ( rural ) , including carriage of all required material from esc banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material / scraped from site to store centre, if any. the bidder shall be responsible for complete execution of the work under the scope of tender specification. any work / activity not specifically indicated but is required for systematic execution of job shall be carried out by the contractor without any extra payment. details of the work as given below ;- 2 erection of 11 kv lines and 25 kva sub-staions work -for electrification of payjal yojana at various places as pailani dera, amchauli & nandadev etc. 3 safely cartage of following poles from esc to site of work - 4 pcc poles 8.5 mtr. long 5 safely cartage of line material viz. conductor, cable, wire, x-arm, clamps, channels, angles, earthing rod, stay etc. 6 erection of pcc poles 8.5 mtr. long as sp with complete ht / lt fittings of all accessories as per direction of engineer incharge / resspo norms. 7 erection of pcc poles 8.5 mtr. long as dp / sdp with complete ht / lt fittings of all accessories as per direction of engineer incharge / resspo norms. 8 laying, sagging, stringing, binding and jumpering ofacsr weasel conductor on the newly erected poles with fitting of all related accessories as per direction of supervising engineer / resspo manual. 9 safely cartage and installation of 25 kva capacity transformers on double pole structure with loading and unloading on both sites in proper alignment as per direction of engineer incharge / resspo manual. 10 erection of stay set complete at digging of pit including the cost of grouting with cement, sand and brick ballast / stone in ratio 1:4:8 as per resspo norms alongwith nozeling & binding of stay set, stay. 11 fabrication of hole in channels / angles / steel cross arms. 12 supply & erection of nut-bolts & washers of suitable size ( arranged by contractor at his own cost ) . 13 concreting / grouting of newly erected single / double pole structure on 8.5 mtr. pcc poles asper direction of supervising engineer / resspo manual. the support shall be grouted with cement, sand and brick ballast / stone ballast in ratio 1:4:8 ( 0.285 cu. mtr. each ) , including the cost of arrangement of cement, sand, brick ballast / stone ballast, stone pad etc. as per actual sire requirement, including the cost of labour, t&p and carrier etc. required for proper completion of work. 14 fixing of earthing rod as per direction of supervising engineer / resspo manual, including the cost of labour, t&p etc. required for proper completion of work. 15 supply & fixing of top channel with clamp & nut-bolts alongwith fitting of all accessories as per resspo manual ( arranged by contractor at his own cost ) . 16 supply & fixing of dropper channel with clamp & nut-bolts alongwith fitting of all accessories as per resspo manual ( arranged by contractor at his own cost ) . 17 supply & fixing of t-off channel with clamp & nut-bolts alongwith fitting of all accessories as per resspo manual ( arranged by contractor at his own cost ) . 18 supply & fixing of f-bracket with nut-bolts for fitting top insulator as per resspo manual ( arranged by contractor at his own cost ) . 19 supply & fixing of x-arm holding clamp with nut-bolts as per resspo manual ( arranged by contractor at his own cost ) . 20 supply & fixing of ms angle 75x75x6x2028 mm. ( base angle ) with nut-bolts as per resspo manual ( arranged by contractor at his own cost ) . 21 supply & fixing of clamp for channels with nut-bolts as per resspo manual ( arranged by contractor at his own cost ) .