tender for the electrification work of 11 no. stw at various places / villages under edd, banda ( rural ) , 1 the following works under various places / sub-stations under full deposit scheme 2023-24 under edd, banda ( rural ) , including carriage of all required material from esc banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material / scraped from site to store centre, if any. the bidder shall be responsible for complete execution of the work under the scope of tender specification. any work / activity not specifically indicated but is required for systematic execution of job shall be carried out by the contractor without any extra payment. details of the work as given below ;- 2 erection of 11 kv lines and 63 kva sub-staions work -for electrification of stw at various places as 51-naraini vill. ajitpura, 05-jaspura vill. raipura ( gadariya ) , 21-jaspura vill. rampur, 27-jaspura vill. sikahula ( sikuwa ) , 28-jaspura vill. gadariya, 29-jaspura vill. raipura ( gadariya ) , 41-jaspura vill. rampur, 17-jaspura vill. sonamau, 54-jaspura vill. dandamau, 59-jaspura vill. pachakauri, 29-banda vill. gokharahi etc. 3 safely cartage of following poles from esc to site of work - 4 pcc poles 8.5 mtr. long 5 safely cartage of line material viz. conductor, cable, wire, x-arm, clamps, channels, angles, earthing rod, stay etc. 6 erection of pcc poles 8.5 mtr. long as sp with complete ht / lt fittings of all accessories as per direction of engineer incharge / resspo norms. 7 erection of pcc poles 8.5 mtr. long as dp / sdp with complete ht / lt fittings of all accessories as per direction of engineer incharge / resspo norms. 8 concreting / grouting of newly erected single / double pole structure on 8.5 mtr. pcc poles asper direction of supervising engineer / resspo manual. the support shall be grouted with cement, sand and brick ballast / stone ballast in ratio 1:4:8 ( 0.285 cu. mtr. each ) , including the cost of arrangement of cement, sand, brick ballast / stone ballast, stone pad etc. as per actual sire requirement, including the cost of labour, t&p and carrier etc. required for proper completion of work. 9 laying, sagging, stringing, binding and jumpering ofacsr weasel conductor on the newly erected poles with fitting of all related accessories as per direction of supervising engineer / resspo manual. 10 laying, sagging, stringing, binding and jumpering ofabc cable on the newly erected poles with fitting of all related accessories as per direction of supervising engineer / resspo manual. 11 erection of stay set complete as per resspo norms alongwith nozeling & binding of stay set, stay. 12 fabrication of 11 kv v-type x-arm ( 16 mm hole, 02 no. each v-type x-arm ) as per resspo drawings with loading, unloading & cartage all complete work. 13 fabrication of 11 kv sub-station base angle ( 16 mm hole, 04 no. each s / s base angle ) as per resspo drawings with loading, unloading & cartage all complete work. 14 fabrication of 11 kv top channel ( 16 mm hole, 10 no. each top channel ) as per resspo drawings with loading, unloading & cartage all complete work. 15 fabrication of 11 kv dropper channel ( 16 mm hole, 07 no. each dropper channel ) as per resspo drawings with loading, unloading & cartage all complete work. 16 fabrication of 11 kv t-off channel ( 16 mm hole, 08 no. each t-off channel ) as per resspo drawings with loading, unloading & cartage all complete work. 17 grouting of stay set complete at digging of pit including the cost of grouting with cement, sand and brick ballast / stone in ratio 1:4:8 as per resspo norms. 18 fixing of earthing rod as per direction of supervising engineer / resspo manual, including the cost of labour, t&p etc. required for proper completion of work. 19 safely cartage of 63 kva capacity transformers from esc / ask store to site of work with loading and unloading on both sites as per direction of engineer incharge / resspo manual. 20 safely installation of 63 kva capacity transformers on double pole structure in proper alignment as per direction of engineer incharge / resspo manual. 21 safely cartage of old 63 kva capacity transformers from site of work to esc / ask store, banda alongwith loading and unloading on both sites as per direction of engineer incharge. 22 chopping of tree branches in visinity of 11 kv / lt lines at various places.