tender for electrification of line under edd hamirpur-2 cartage of poles from store center hamirpur from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labor, t & p carrier etc. required for proper completion of work. 2.1 ( a ) 8.5 m long pcc pole 3 cartage of line material viz. weasel conductor, gi earth wire, cross arm, angle, channel, insulator, clamps and other line material from store center any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends, including the work of dragging etc. and also including the cost of labor, t & p and carrier etc. required for proper completion of work. 4 erection of single support poles including complete h.t. / l.t. fittings as per resspo manual and as per direction of engineer incharge including the cost of labor, t&p and carrier etc. required for proper completion of work. 4.1 ( a ) 8.5 m long pcc pole 5 erection of double poles including complete h.t. / l.t. fittings as per resspo manual and as per direction of engineer incharge including the cost of labor, t&p and carrier etc. required for proper completion of work. 5.1 ( a ) 8.5 m long pcc pole 6 grouting of pole as per resspo manual and as per direction of engineer incharge including the cost of labor, t&p and carrier etc. required for proper completion of work. 7 erection and grouting of stay set including the work of nuzzling etc. as per resspo manual. and also including the cost of all grouting material , labour t&p etc.required for proper completion of work. 8 laying, sagging, stringing, binding and jumpring etc. of acsr weasel conductor new / old on the newly erected pole as per resspo manual and as per direction of supervising engineer. 9 fixing of t-off channel with fitting of all accessories as per resspo manual and as per direction of supervising engineer. 10 fabrication of 11 kv dropper channel ( 16 mm hole, 7 no each dropper channel ) as per resspo dragging with loading, unloading & cartage all complete work. 11 fabrication of 11 kv top channel ( 16mm & 20 mm hole 10 no each top channel ) as per resspo dragging with loading, unloading & cartage, all complete work. 12 fabrication of 11 kv v type steel cross arms ( 16mm hole two no each cross arms ) as per resspo dragging with loading, unloading & cartage, all complete work. 13 fabrication of base angle t / f ( 16 mm hole, 4 no each sub-station base angle ) as per resspo dragging with loading, unloading & cartage, all complete work. 14 fabrication of 11 kv t-off channel ( 16 mm hole, 8 no each t-off channel ) as per resspo dragging with loading, unloading & cartage, all complete work. 15 safe de-maunting of 25 / 63 kva t / f old to installation new double pole with cartge & erection all work in completed.